[slim]slim en qwerty (contourné)

[willcoyote]

Bonjour
Suite a une mise a jour du systeme, je redémarre et m'aperçois que slim est passé en qwerty.
seul slim a ce comportement car mon systeme fonctionne bien en azerty une fois lancé.

J'ai parcouru le wiki de slim et Xorg mais n'ai rien trouvé d'anormal

J'aurai besoin d'aide pour régler ce problème

merci

[benjarobin]

http://wiki.archlinux.fr/Xorg#Clavier
Si c'est déjà configuré tel que décrit dans le Wiki, peux tu donner le log de Xorg (/var/log/...)

[willcoyote]

Mon fichier /etc/X11/xorg.conf.d/10-keyboard-layout.conf

Code : Tout sélectionner

Section "InputClass"
    Identifier         "Keyboard Layout"
    MatchIsKeyboard    "yes"
    MatchDevicePath    "/dev/input/event*"
    Option             "XkbLayout"  "fr"
    Option             "XkbVariant" "latin9" # accès aux caractères spéciaux plus logique avec "Alt Gr" (ex : « » avec "Alt Gr" w x)
EndSection

apparement, il est bien configuré comme le wiki

Mon fichier /var/log/Xorg

Code : Tout sélectionner

[     5.952] 
X.Org X Server 1.14.1
Release Date: 2013-04-17
[     5.952] X Protocol Version 11, Revision 0
[     5.952] Build Operating System: Linux 3.8.7-1-ARCH x86_64 
[     5.952] Current Operating System: Linux eric 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[     5.952] Kernel command line: root=/dev/disk/by-uuid/9c2da8a1-a0b8-493e-9340-3b632b64cebb elevator=deadline ro vga=792 noatime console=tty1 quiet
[     5.952] Build Date: 17 April 2013  02:37:06PM
[     5.952]  
[     5.952] Current version of pixman: 0.30.0
[     5.952] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.952] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.952] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 23:24:06 2013
[     5.958] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.963] (==) ServerLayout "Layout0"
[     5.963] (**) |-->Screen "Screen0" (0)
[     5.963] (**) |   |-->Monitor "Monitor0"
[     5.963] (**) |   |-->Device "Device0"
[     5.963] (**) |-->Input Device "Keyboard0"
[     5.963] (**) |-->Input Device "Mouse0"
[     5.963] (**) Option "Xinerama" "0"
[     5.963] (==) Automatically adding devices
[     5.963] (==) Automatically enabling devices
[     5.963] (==) Automatically adding GPU devices
[     5.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     5.967] 	Entry deleted from font path.
[     5.969] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     5.969] 	Entry deleted from font path.
[     5.969] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     5.970] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     5.970] 	Entry deleted from font path.
[     5.970] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     5.970] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     5.970] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.970] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     5.970] (WW) Disabling Keyboard0
[     5.970] (WW) Disabling Mouse0
[     5.970] (II) Loader magic: 0x7fcc20
[     5.970] (II) Module ABI versions:
[     5.970] 	X.Org ANSI C Emulation: 0.4
[     5.970] 	X.Org Video Driver: 14.1
[     5.970] 	X.Org XInput driver : 19.1
[     5.970] 	X.Org Server Extension : 7.0
[     5.971] (II) config/udev: Adding drm device (/dev/dri/card0)
[     5.972] (--) PCI:*(0:1:0:0) 10de:0e22:1043:835e rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[     5.972] (--) PCI: (0:5:0:0) 109e:036e:0070:13eb rev 17, Mem @ 0xfaffe000/4096
[     5.972] Initializing built-in extension Generic Event Extension
[     5.972] Initializing built-in extension SHAPE
[     5.972] Initializing built-in extension MIT-SHM
[     5.972] Initializing built-in extension XInputExtension
[     5.972] Initializing built-in extension XTEST
[     5.972] Initializing built-in extension BIG-REQUESTS
[     5.972] Initializing built-in extension SYNC
[     5.972] Initializing built-in extension XKEYBOARD
[     5.972] Initializing built-in extension XC-MISC
[     5.972] Initializing built-in extension SECURITY
[     5.972] Initializing built-in extension XINERAMA
[     5.972] Initializing built-in extension XFIXES
[     5.972] Initializing built-in extension RENDER
[     5.972] Initializing built-in extension RANDR
[     5.972] Initializing built-in extension COMPOSITE
[     5.972] Initializing built-in extension DAMAGE
[     5.972] Initializing built-in extension MIT-SCREEN-SAVER
[     5.972] Initializing built-in extension DOUBLE-BUFFER
[     5.972] Initializing built-in extension RECORD
[     5.972] Initializing built-in extension DPMS
[     5.972] Initializing built-in extension X-Resource
[     5.972] Initializing built-in extension XVideo
[     5.972] Initializing built-in extension XVideo-MotionCompensation
[     5.972] Initializing built-in extension XFree86-VidModeExtension
[     5.972] Initializing built-in extension XFree86-DGA
[     5.972] Initializing built-in extension XFree86-DRI
[     5.972] Initializing built-in extension DRI2
[     5.972] (II) LoadModule: "glx"
[     5.978] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.169] (II) Module glx: vendor="NVIDIA Corporation"
[     6.169] 	compiled for 4.0.2, module version = 1.0.0
[     6.169] 	Module class: X.Org Server Extension
[     6.169] (II) NVIDIA GLX Module  319.23  Thu May 16 19:23:10 PDT 2013
[     6.171] Loading extension GLX
[     6.171] (II) LoadModule: "nvidia"
[     6.176] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.198] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.198] 	compiled for 4.0.2, module version = 1.0.0
[     6.198] 	Module class: X.Org Video Driver
[     6.201] (II) NVIDIA dlloader X Driver  319.23  Thu May 16 19:02:20 PDT 2013
[     6.201] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.203] (++) using VT number 7

[     6.224] (II) Loading sub module "fb"
[     6.224] (II) LoadModule: "fb"
[     6.225] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.231] (II) Module fb: vendor="X.Org Foundation"
[     6.231] 	compiled for 1.14.1, module version = 1.0.0
[     6.231] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.231] (WW) Unresolved symbol: fbGetGCPrivateKey
[     6.231] (II) Loading sub module "wfb"
[     6.231] (II) LoadModule: "wfb"
[     6.231] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.236] (II) Module wfb: vendor="X.Org Foundation"
[     6.236] 	compiled for 1.14.1, module version = 1.0.0
[     6.236] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.236] (II) Loading sub module "shadow"
[     6.236] (II) LoadModule: "shadow"
[     6.236] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     6.238] (II) Module shadow: vendor="X.Org Foundation"
[     6.238] 	compiled for 1.14.1, module version = 1.1.0
[     6.238] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.238] (II) Loading sub module "ramdac"
[     6.238] (II) LoadModule: "ramdac"
[     6.238] (II) Module "ramdac" already built-in
[     6.241] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     6.241] (==) NVIDIA(0): RGB weight 888
[     6.241] (==) NVIDIA(0): Default visual is TrueColor
[     6.241] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.241] (**) NVIDIA(0): Option "Stereo" "0"
[     6.241] (**) NVIDIA(0): Stereo disabled by request
[     6.241] (**) NVIDIA(0): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
[     6.241] (**) NVIDIA(0): Enabling 2D acceleration
[     6.860] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[     6.860] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[     6.889] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[     6.889] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[     6.891] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
[     6.891] (--) NVIDIA(0): Memory: 1048576 kBytes
[     6.891] (--) NVIDIA(0): VideoBIOS: 70.04.2e.00.04
[     6.891] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     6.892] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
[     6.892] (--) NVIDIA(0):     CRT-0
[     6.892] (--) NVIDIA(0):     LG Electronics 37LB2R-ZH (CRT-1) (connected)
[     6.892] (--) NVIDIA(0):     Ancor Communications Inc ASUS VH232 (DFP-0) (boot, connected)
[     6.892] (--) NVIDIA(0):     DFP-1
[     6.892] (--) NVIDIA(0):     DFP-2
[     6.893] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[     6.893] (--) NVIDIA(0): LG Electronics 37LB2R-ZH (CRT-1): 400.0 MHz maximum pixel clock
[     6.893] (--) NVIDIA(0): Ancor Communications Inc ASUS VH232 (DFP-0): 330.0 MHz maximum pixel clock
[     6.893] (--) NVIDIA(0): Ancor Communications Inc ASUS VH232 (DFP-0): Internal Dual Link TMDS
[     6.893] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[     6.893] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[     6.893] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[     6.893] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[     6.893] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     6.893] (**) NVIDIA(0):     device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[     6.893] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[     6.893] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     6.893] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[     6.893] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[     6.893] (**) NVIDIA(0):     devices.)
[     6.895] (II) NVIDIA(0): Validated MetaModes:
[     6.895] (II) NVIDIA(0):     "DFP:nvidia-auto-select+0+0"
[     6.895] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     6.915] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[     6.915] (--) NVIDIA(0):     option
[     6.915] (--) Depth 24 pixmap format is 32 bpp
[     6.915] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[     6.915] (II) NVIDIA:     access.
[     6.918] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     6.918] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     6.918] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     6.918] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     6.918] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     6.918] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     6.918] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     6.918] (II) NVIDIA(0):     Config Options in the README.
[     6.919] (II) NVIDIA(0): Setting mode "DFP:nvidia-auto-select+0+0"
[     6.953] Loading extension NV-GLX
[     6.998] (==) NVIDIA(0): Disabling shared memory pixmaps
[     6.998] (==) NVIDIA(0): Backing store disabled
[     6.998] (==) NVIDIA(0): Silken mouse enabled
[     6.998] (**) NVIDIA(0): DPMS enabled
[     6.998] Loading extension NV-CONTROL
[     6.999] Loading extension XINERAMA
[     6.999] (II) Loading sub module "dri2"
[     6.999] (II) LoadModule: "dri2"
[     6.999] (II) Module "dri2" already built-in
[     6.999] (II) NVIDIA(0): [DRI2] Setup complete
[     6.999] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.999] (--) RandR disabled
[     7.005] (II) Initializing extension GLX
[     7.080] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     7.080] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.080] (**) Power Button: Applying InputClass "Keyboard Layout"
[     7.080] (II) LoadModule: "evdev"
[     7.080] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.081] (II) Module evdev: vendor="X.Org Foundation"
[     7.081] 	compiled for 1.14.0, module version = 2.8.0
[     7.081] 	Module class: X.Org XInput Driver
[     7.081] 	ABI class: X.Org XInput driver, version 19.1
[     7.081] (II) Using input driver 'evdev' for 'Power Button'
[     7.081] (**) Power Button: always reports core events
[     7.081] (**) evdev: Power Button: Device: "/dev/input/event4"
[     7.081] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.081] (--) evdev: Power Button: Found keys
[     7.081] (II) evdev: Power Button: Configuring as keyboard
[     7.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[     7.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.081] (**) Option "xkb_rules" "evdev"
[     7.081] (**) Option "xkb_model" "evdev"
[     7.081] (**) Option "xkb_layout" "fr"
[     7.081] (**) Option "xkb_variant" "latin9"
[     7.110] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     7.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.110] (**) Power Button: Applying InputClass "Keyboard Layout"
[     7.110] (II) Using input driver 'evdev' for 'Power Button'
[     7.110] (**) Power Button: always reports core events
[     7.110] (**) evdev: Power Button: Device: "/dev/input/event3"
[     7.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.110] (--) evdev: Power Button: Found keys
[     7.110] (II) evdev: Power Button: Configuring as keyboard
[     7.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[     7.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.110] (**) Option "xkb_rules" "evdev"
[     7.110] (**) Option "xkb_model" "evdev"
[     7.110] (**) Option "xkb_layout" "fr"
[     7.110] (**) Option "xkb_variant" "latin9"
[     7.110] (II) config/udev: Adding drm device (/dev/dri/card0)
[     7.110] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[     7.110] (II) No input driver specified, ignoring this device.
[     7.110] (II) This device may have been added with another device file.
[     7.111] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[     7.111] (II) No input driver specified, ignoring this device.
[     7.111] (II) This device may have been added with another device file.
[     7.111] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[     7.111] (II) No input driver specified, ignoring this device.
[     7.111] (II) This device may have been added with another device file.
[     7.111] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[     7.111] (II) No input driver specified, ignoring this device.
[     7.111] (II) This device may have been added with another device file.
[     7.111] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[     7.112] (II) No input driver specified, ignoring this device.
[     7.112] (II) This device may have been added with another device file.
[     7.112] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[     7.112] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[     7.112] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     7.112] (**) Logitech USB Receiver: always reports core events
[     7.112] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[     7.112] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
[     7.112] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[     7.112] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[     7.112] (--) evdev: Logitech USB Receiver: Found relative axes
[     7.112] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[     7.112] (II) evdev: Logitech USB Receiver: Configuring as mouse
[     7.112] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[     7.112] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[     7.112] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/input/input0/event0"
[     7.112] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[     7.112] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[     7.112] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[     7.112] (**) Logitech USB Receiver: (accel) acceleration profile 0
[     7.112] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     7.112] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     7.112] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[     7.113] (II) No input driver specified, ignoring this device.
[     7.113] (II) This device may have been added with another device file.
[     7.113] (II) config/udev: Adding input device Wacom Graphire3 (/dev/input/event5)
[     7.113] (**) Wacom Graphire3: Applying InputClass "evdev tablet catchall"
[     7.113] (**) Wacom Graphire3: Applying InputClass "Wacom class"
[     7.113] (II) LoadModule: "wacom"
[     7.113] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[     7.114] (II) Module wacom: vendor="X.Org Foundation"
[     7.114] 	compiled for 1.14.0, module version = 0.20.0
[     7.114] 	Module class: X.Org XInput Driver
[     7.114] 	ABI class: X.Org XInput driver, version 19.1
[     7.114] (II) Using input driver 'wacom' for 'Wacom Graphire3'
[     7.114] (**) Wacom Graphire3: always reports core events
[     7.114] (**) Option "Device" "/dev/input/event5"
[     7.114] (II) Wacom Graphire3: type not specified, assuming 'stylus'.
[     7.114] (II) Wacom Graphire3: other types will be automatically added.
[     7.114] (--) Wacom Graphire3 stylus: using pressure threshold of 27 for button 1
[     7.114] (--) Wacom Graphire3 stylus: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000  tilt=disabled
[     7.114] (II) Wacom Graphire3 stylus: hotplugging dependent devices.
[     7.114] (EE) Wacom Graphire3 stylus: Invalid type 'touch' for this device.
[     7.114] (EE) Wacom Graphire3 stylus: Invalid type 'pad' for this device.
[     7.114] (II) Wacom Graphire3 stylus: hotplugging completed.
[     7.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.1/8-1.1:1.0/input/input5/event5"
[     7.120] (II) XINPUT: Adding extended input device "Wacom Graphire3 stylus" (type: STYLUS, id 9)
[     7.120] (**) Wacom Graphire3 stylus: (accel) keeping acceleration scheme 1
[     7.120] (**) Wacom Graphire3 stylus: (accel) acceleration profile 0
[     7.120] (**) Wacom Graphire3 stylus: (accel) acceleration factor: 2.000
[     7.120] (**) Wacom Graphire3 stylus: (accel) acceleration threshold: 4
[     7.120] (II) config/udev: Adding input device Wacom Graphire3 (/dev/input/mouse2)
[     7.120] (II) No input driver specified, ignoring this device.
[     7.120] (II) This device may have been added with another device file.
[     7.121] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:401b (/dev/input/event1)
[     7.121] (**) Logitech Unifying Device. Wireless PID:401b: Applying InputClass "evdev pointer catchall"
[     7.121] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:401b'
[     7.121] (**) Logitech Unifying Device. Wireless PID:401b: always reports core events
[     7.121] (**) evdev: Logitech Unifying Device. Wireless PID:401b: Device: "/dev/input/event1"
[     7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Vendor 0x46d Product 0xc52b
[     7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found 20 mouse buttons
[     7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found scroll wheel(s)
[     7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found relative axes
[     7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found x and y relative axes
[     7.121] (II) evdev: Logitech Unifying Device. Wireless PID:401b: Configuring as mouse
[     7.121] (II) evdev: Logitech Unifying Device. Wireless PID:401b: Adding scrollwheel support
[     7.121] (**) evdev: Logitech Unifying Device. Wireless PID:401b: YAxisMapping: buttons 4 and 5
[     7.121] (**) evdev: Logitech Unifying Device. Wireless PID:401b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.2/8-1.2:1.2/0003:046D:C52B.0005/input/input1/event1"
[     7.121] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:401b" (type: MOUSE, id 10)
[     7.121] (II) evdev: Logitech Unifying Device. Wireless PID:401b: initialized for relative axes.
[     7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) keeping acceleration scheme 1
[     7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration profile 0
[     7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration factor: 2.000
[     7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration threshold: 4
[     7.121] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:401b (/dev/input/mouse1)
[     7.121] (II) No input driver specified, ignoring this device.
[     7.121] (II) This device may have been added with another device file.
[     7.122] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4016 (/dev/input/event2)
[     7.122] (**) Logitech Unifying Device. Wireless PID:4016: Applying InputClass "evdev keyboard catchall"
[     7.122] (**) Logitech Unifying Device. Wireless PID:4016: Applying InputClass "Keyboard Layout"
[     7.122] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4016'
[     7.122] (**) Logitech Unifying Device. Wireless PID:4016: always reports core events
[     7.122] (**) evdev: Logitech Unifying Device. Wireless PID:4016: Device: "/dev/input/event2"
[     7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Vendor 0x46d Product 0xc52b
[     7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found 1 mouse buttons
[     7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found scroll wheel(s)
[     7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found relative axes
[     7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Forcing relative x/y axes to exist.
[     7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found absolute axes
[     7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Forcing absolute x/y axes to exist.
[     7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found keys
[     7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Configuring as mouse
[     7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Configuring as keyboard
[     7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Adding scrollwheel support
[     7.122] (**) evdev: Logitech Unifying Device. Wireless PID:4016: YAxisMapping: buttons 4 and 5
[     7.122] (**) evdev: Logitech Unifying Device. Wireless PID:4016: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.2/8-1.2:1.2/0003:046D:C52B.0005/input/input2/event2"
[     7.122] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4016" (type: KEYBOARD, id 11)
[     7.122] (**) Option "xkb_rules" "evdev"
[     7.122] (**) Option "xkb_model" "evdev"
[     7.122] (**) Option "xkb_layout" "fr"
[     7.122] (**) Option "xkb_variant" "latin9"
[     7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: initialized for relative axes.
[     7.122] (WW) evdev: Logitech Unifying Device. Wireless PID:4016: ignoring absolute axes.
[     7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) keeping acceleration scheme 1
[     7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) acceleration profile 0
[     7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) acceleration factor: 2.000
[     7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) acceleration threshold: 4
[     7.123] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     7.123] (II) No input driver specified, ignoring this device.
[     7.123] (II) This device may have been added with another device file.
[     7.127] (**) Wacom Graphire3 eraser: Applying InputClass "evdev tablet catchall"
[     7.127] (**) Wacom Graphire3 eraser: Applying InputClass "Wacom class"
[     7.127] (II) Using input driver 'wacom' for 'Wacom Graphire3 eraser'
[     7.127] (**) Wacom Graphire3 eraser: always reports core events
[     7.127] (**) Option "Device" "/dev/input/event5"
[     7.127] (**) Option "Type" "eraser"
[     7.127] (--) Wacom Graphire3 eraser: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000  tilt=disabled
[     7.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.1/8-1.1:1.0/input/input5/event5"
[     7.127] (II) XINPUT: Adding extended input device "Wacom Graphire3 eraser" (type: ERASER, id 12)
[     7.127] (**) Wacom Graphire3 eraser: (accel) keeping acceleration scheme 1
[     7.127] (**) Wacom Graphire3 eraser: (accel) acceleration profile 0
[     7.127] (**) Wacom Graphire3 eraser: (accel) acceleration factor: 2.000
[     7.127] (**) Wacom Graphire3 eraser: (accel) acceleration threshold: 4
[     7.127] (**) Wacom Graphire3 cursor: Applying InputClass "evdev tablet catchall"
[     7.127] (**) Wacom Graphire3 cursor: Applying InputClass "Wacom class"
[     7.127] (II) Using input driver 'wacom' for 'Wacom Graphire3 cursor'
[     7.127] (**) Wacom Graphire3 cursor: always reports core events
[     7.127] (**) Option "Device" "/dev/input/event5"
[     7.127] (**) Option "Type" "cursor"
[     7.127] (--) Wacom Graphire3 cursor: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000  tilt=disabled
[     7.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.1/8-1.1:1.0/input/input5/event5"
[     7.127] (II) XINPUT: Adding extended input device "Wacom Graphire3 cursor" (type: CURSOR, id 13)
[     7.128] (**) Wacom Graphire3 cursor: (accel) keeping acceleration scheme 1
[     7.128] (**) Wacom Graphire3 cursor: (accel) acceleration profile 0
[     7.128] (**) Wacom Graphire3 cursor: (accel) acceleration factor: 2.000
[     7.128] (**) Wacom Graphire3 cursor: (accel) acceleration threshold: 4
[     8.046] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event6)
[     8.046] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[     8.046] (**) UVC Camera (046d:0825): Applying InputClass "Keyboard Layout"
[     8.046] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[     8.046] (**) UVC Camera (046d:0825): always reports core events
[     8.046] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event6"
[     8.046] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[     8.046] (--) evdev: UVC Camera (046d:0825): Found keys
[     8.046] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[     8.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4:1.0/input/input6/event6"
[     8.046] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 14)
[     8.046] (**) Option "xkb_rules" "evdev"
[     8.046] (**) Option "xkb_model" "evdev"
[     8.046] (**) Option "xkb_layout" "fr"
[     8.046] (**) Option "xkb_variant" "latin9"
[    25.165] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[    25.165] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    25.165] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.165] (**) NVIDIA(0):     device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[    25.165] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    25.195] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[    25.195] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[    25.195] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.195] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[    25.195] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[    25.195] (**) NVIDIA(0):     devices.)
[    25.401] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1360x768 +1920+0 {ViewPortIn=1360x768, ViewPortOut=1360x768+0+0}"
[    25.468] (II) NVIDIA(0): Setting mode "DVI-I-2: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-1: nvidia-auto-select @1360x768 +1920+0 {ViewPortIn=1360x768, ViewPortOut=1360x768+0+0}"
[    25.790] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[    25.790] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    25.790] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.790] (**) NVIDIA(0):     device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[    25.790] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    25.820] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[    25.820] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[    25.820] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.820] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[    25.820] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[    25.820] (**) NVIDIA(0):     devices.)
[    26.225] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[    26.225] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    26.225] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    26.225] (**) NVIDIA(0):     device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[    26.225] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    26.255] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[    26.255] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[    26.255] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    26.255] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[    26.255] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[    26.255] (**) NVIDIA(0):     devices.)

[willcoyote]

J'ai l'origine du problème
j'avais changé mon clavier pour un clavier sans fil (logitech k330)
J'ai rebranché un clavier filaire et j'ai slim en azerty
je rebranche mon clavier sans fil: slim en qwerty

[widapit]

Salut !

Avec un clavier logitech, ça m'a fait penser à ça :
-> http://forums.archlinux.fr/topic10142.html

Si ça peut aider ...

[willcoyote]

Bien vu widapit
C'est exactement le même problème

J'ai essayé la dernière solution qui consiste a rajouter dans le fichier: /etc/slim.conf

Code : Tout sélectionner

sessionstart_cmd        setxkbmap

ça ne fonctionne pas

pour les autres solutions proposées, ça me semble trop aléatoire
dire que j'avais choisi un clavier logitech justement parce que je n'avais jamais eu de soucis avec leurs périphériques toujours bien reconnu

Je vais arrêter de vous embêter avec ça, j'ai rebranché un clavier filaire

Je vous remercie tous les deux :benjarobin et widapit pour votre aide

[Rapty]

il est trop tôt pour abandonné

la solution est pas loin !

as tu essayé avec setxkbmap fr ?

as tu essayé (même temporairement) avec un autre chargeur genre LXDM ?

[benjarobin]

Le chargeur de session n'est pas responsable, c'est un bug du module gérant le clavier.
Il peut être contourné via setxkbmap

[willcoyote]

Rapty
J'ai essayé

Code : Tout sélectionner

sessionstart_cmd        setxkbmap fr

dans .xinitrc puis dans /etc/slim.conf
dans les 2 cas, ça ne change rien

Sinon ce n'est vraiment pas un soucis pour moi d'utiliser mon clavier filaire, au moins, j'aurais pas a changer les piles
je ne cherche pas non plus a faire fonctionner mon clavier sans fil a tout prix

Maintenant je connais l'origine du problème
le matériel qui posait problème a été changé
ça fonctionne donc pour moi, c'est limite résolu