[Souris] pointeur qui se bloque (Contourné)

Questions et astuces concernant l'installation et la configuration d'archlinux
Répondre
Avatar de l’utilisateur
Fork Bomb
Daikyu
Messages : 99
Inscription : dim. 29 mai 2011, 15:29
Localisation : Error 404, not found !

[Souris] pointeur qui se bloque (Contourné)

Message par Fork Bomb »

Salut les gens !
Depuis environ deux semaines, le curseur de ma souris se bloque régulièrement. Jusqu’a présent, je contournais en débranchant / rebranchant la prise USB. Las ! Je suis tranquille entre quelques secondes (minimum 2) et plusieurs heures, selon le temps qu’il fait, ma santé, l’âge du capitaine et bien sûr le nombre de grains de riz d’une rizière.
En un mot comme en [s]sang[/s] cent : ANARCHIE !!!! (in the UK)
---
J’ai fait quelques recherches avant de me décider à poster ici.
Je suis notamment tombé sur un post ici. Les conseils donnés ne m’ont pas aidé.
Je suis également tombé sur une explication en anglais, qui ne m’a pas plus aidé.
---
A touted fins utiles, je vous fournis une copie de mon 10-evdev.conf

Code : Tout sélectionner

# Catchall classes for input devices
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
	Identifier "evdev pointer catchall"
	MatchIsPointer "on"
	MatchDevicePath "/dev/input/event*"
	Driver "evdev"
#	ZaxisMapping "4 5"
	Option "Emulate3Buttons" "false"
EndSection

Section "InputClass"
	Identifier "evdev keyboard catchall"
	MatchIsKeyboard "on"
	MatchDevicePath "/dev/input/event*"
	Driver "evdev"
	Option "XkbModel" "pc105"
	Option "XkbLayout" "fr"
	Option "XkbVariant" "latin9"
EndSection

#Section "InputClass"
#	Identifier "evdev touchpad catchall"
#	MatchIsTouchpad "on"
#	MatchDevicePath "/dev/input/event*"
#	Driver "evdev"
#EndSection

#Section "InputClass"
#	Identifier "evdev tablet catchall"
#	MatchIsTablet "on"
#	MatchDevicePath "/dev/input/event*"
#	Driver "evdev"
#EndSection

#Section "InputClass"
#	Identifier "evdev touchscreen catchall"
#	MatchIsTouchscreen "on"
#	MatchDevicePath "/dev/input/event*"
#	Driver "evdev"
#EndSection
La section concernant la souris a été complétée récemment, pensant que celà pourrait régler le problème. Raté.
----
Ainsi que le fichier log de Xorg complet, un grep EE dessus ne donnant rien.

Code : Tout sélectionner

[    15.626] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[    15.626] X Protocol Version 11, Revision 0
[    15.626] Build Operating System: Linux 3.9.7-1-ARCH i686 
[    15.626] Current Operating System: Linux kakariko 3.9.8-1-ARCH #1 SMP PREEMPT Fri Jun 28 07:43:59 CEST 2013 i686
[    15.626] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a69784a6-e32f-4a88-8797-ecdd202fe0d3 ro quiet console=tty1 splash=silent,theme:arch-black
[    15.626] Build Date: 01 July 2013  10:52:25AM
[    15.626]  
[    15.626] Current version of pixman: 0.30.0
[    15.626] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.626] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.627] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul  4 09:34:08 2013
[    15.670] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.031] (==) No Layout section.  Using the first Screen section.
[    16.031] (==) No screen section available. Using defaults.
[    16.031] (**) |-->Screen "Default Screen Section" (0)
[    16.031] (**) |   |-->Monitor "<default monitor>"
[    16.053] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    16.054] (**) |   |-->Device "Default nvidia Device"
[    16.054] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    16.054] (==) Automatically adding devices
[    16.054] (==) Automatically enabling devices
[    16.054] (==) Automatically adding GPU devices
[    16.478] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    16.478] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.478] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.500] (II) Loader magic: 0x8258620
[    16.500] (II) Module ABI versions:
[    16.500] 	X.Org ANSI C Emulation: 0.4
[    16.500] 	X.Org Video Driver: 14.1
[    16.500] 	X.Org XInput driver : 19.1
[    16.500] 	X.Org Server Extension : 7.0
[    16.502] (--) PCI:*(0:1:0:0) 10de:0326:1462:9982 rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, BIOS @ 0x????????/131072
[    16.526] Initializing built-in extension Generic Event Extension
[    16.526] Initializing built-in extension SHAPE
[    16.526] Initializing built-in extension MIT-SHM
[    16.526] Initializing built-in extension XInputExtension
[    16.526] Initializing built-in extension XTEST
[    16.526] Initializing built-in extension BIG-REQUESTS
[    16.526] Initializing built-in extension SYNC
[    16.527] Initializing built-in extension XKEYBOARD
[    16.527] Initializing built-in extension XC-MISC
[    16.527] Initializing built-in extension SECURITY
[    16.527] Initializing built-in extension XINERAMA
[    16.527] Initializing built-in extension XFIXES
[    16.527] Initializing built-in extension RENDER
[    16.527] Initializing built-in extension RANDR
[    16.527] Initializing built-in extension COMPOSITE
[    16.527] Initializing built-in extension DAMAGE
[    16.527] Initializing built-in extension MIT-SCREEN-SAVER
[    16.527] Initializing built-in extension DOUBLE-BUFFER
[    16.527] Initializing built-in extension RECORD
[    16.527] Initializing built-in extension DPMS
[    16.527] Initializing built-in extension X-Resource
[    16.527] Initializing built-in extension XVideo
[    16.527] Initializing built-in extension XVideo-MotionCompensation
[    16.527] Initializing built-in extension XFree86-VidModeExtension
[    16.527] Initializing built-in extension XFree86-DGA
[    16.527] Initializing built-in extension XFree86-DRI
[    16.527] Initializing built-in extension DRI2
[    16.527] (II) LoadModule: "glx"
[    16.560] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.816] (II) Module glx: vendor="NVIDIA Corporation"
[    19.816] 	compiled for 4.0.2, module version = 1.0.0
[    19.816] 	Module class: X.Org Server Extension
[    19.816] (II) NVIDIA GLX Module  173.14.37  Wed Mar  6 17:14:50 PST 2013
[    19.816] Loading extension GLX
[    19.816] (II) LoadModule: "nvidia"
[    19.899] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    20.281] (II) Module nvidia: vendor="NVIDIA Corporation"
[    20.282] 	compiled for 4.0.2, module version = 1.0.0
[    20.282] 	Module class: X.Org Video Driver
[    20.357] (II) NVIDIA dlloader X Driver  173.14.37  Wed Mar  6 17:02:37 PST 2013
[    20.357] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    20.357] (++) using VT number 7

[    20.551] (II) Loading sub module "fb"
[    20.551] (II) LoadModule: "fb"
[    20.552] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.686] (II) Module fb: vendor="X.Org Foundation"
[    20.686] 	compiled for 1.14.2, module version = 1.0.0
[    20.686] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.686] (II) Loading sub module "wfb"
[    20.686] (II) LoadModule: "wfb"
[    20.687] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    20.860] (II) Module wfb: vendor="X.Org Foundation"
[    20.860] 	compiled for 1.14.2, module version = 1.0.0
[    20.860] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.860] (II) Loading sub module "ramdac"
[    20.860] (II) LoadModule: "ramdac"
[    20.860] (II) Module "ramdac" already built-in
[    20.894] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    20.894] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    20.894] (==) NVIDIA(0): RGB weight 888
[    20.894] (==) NVIDIA(0): Default visual is TrueColor
[    20.894] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.929] (**) NVIDIA(0): Enabling RENDER acceleration
[    20.929] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    20.929] (II) NVIDIA(0):     enabled.
[    21.766] (II) NVIDIA(0): NVIDIA GPU GeForce FX 5500 (NV34) at PCI:1:0:0 (GPU-0)
[    21.767] (--) NVIDIA(0): Memory: 131072 kBytes
[    21.767] (--) NVIDIA(0): VideoBIOS: 04.34.20.66.00
[    21.767] (II) NVIDIA(0): Detected AGP rate: 8X
[    21.767] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    21.767] (--) NVIDIA(0): Connected display device(s) on GeForce FX 5500 at PCI:1:0:0:
[    21.767] (--) NVIDIA(0):     ACER X233H (CRT-0)
[    21.767] (--) NVIDIA(0): ACER X233H (CRT-0): 350.0 MHz maximum pixel clock
[    21.767] (II) NVIDIA(0): Assigned Display Device: CRT-0
[    21.768] (==) NVIDIA(0): 
[    21.768] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    21.768] (==) NVIDIA(0):     will be used as the requested mode.
[    21.768] (==) NVIDIA(0): 
[    21.768] (II) NVIDIA(0): Validated modes:
[    21.768] (II) NVIDIA(0):     "nvidia-auto-select"
[    21.768] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    21.768] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    21.768] (--) NVIDIA(0):     option
[    21.768] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    21.768] (--) Depth 24 pixmap format is 32 bpp
[    21.771] (II) NVIDIA(0): Initialized AGP GART.
[    21.776] (II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
[    21.776] (II) NVIDIA(0):     be running or the "AcpidSocketPath" X configuration option
[    21.776] (II) NVIDIA(0):     may not be set correctly.  When the ACPI daemon is
[    21.776] (II) NVIDIA(0):     available, the NVIDIA X driver can use it to receive ACPI
[    21.776] (II) NVIDIA(0):     events.  For details, please see the "ConnectToAcpid" and
[    21.776] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    21.776] (II) NVIDIA(0):     Config Options in the README.
[    21.776] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    22.004] Loading extension NV-GLX
[    22.030] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[    22.128] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[    22.128] (==) NVIDIA(0): Backing store disabled
[    22.128] (==) NVIDIA(0): Silken mouse enabled
[    22.137] (==) NVIDIA(0): DPMS enabled
[    22.138] Loading extension NV-CONTROL
[    22.138] (WW) NVIDIA(0): Option "GLXVBlank" is not used
[    22.139] (==) RandR enabled
[    22.444] (II) Initializing extension GLX
[    24.428] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    24.429] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.429] (II) LoadModule: "evdev"
[    24.429] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.546] (II) Module evdev: vendor="X.Org Foundation"
[    24.546] 	compiled for 1.14.0, module version = 2.8.0
[    24.546] 	Module class: X.Org XInput Driver
[    24.546] 	ABI class: X.Org XInput driver, version 19.1
[    24.546] (II) Using input driver 'evdev' for 'Power Button'
[    24.546] (**) Power Button: always reports core events
[    24.546] (**) evdev: Power Button: Device: "/dev/input/event5"
[    24.547] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.547] (--) evdev: Power Button: Found keys
[    24.547] (II) evdev: Power Button: Configuring as keyboard
[    24.547] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    24.547] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.547] (**) Option "xkb_rules" "evdev"
[    24.547] (**) Option "xkb_model" "pc105"
[    24.547] (**) Option "xkb_layout" "fr"
[    24.547] (**) Option "xkb_variant" "latin9"
[    24.928] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    24.928] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.928] (II) Using input driver 'evdev' for 'Power Button'
[    24.928] (**) Power Button: always reports core events
[    24.928] (**) evdev: Power Button: Device: "/dev/input/event3"
[    24.928] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.928] (--) evdev: Power Button: Found keys
[    24.928] (II) evdev: Power Button: Configuring as keyboard
[    24.928] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    24.928] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    24.928] (**) Option "xkb_rules" "evdev"
[    24.928] (**) Option "xkb_model" "pc105"
[    24.928] (**) Option "xkb_layout" "fr"
[    24.928] (**) Option "xkb_variant" "latin9"
[    24.929] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    24.930] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.930] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.930] (**) Sleep Button: always reports core events
[    24.930] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    24.930] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    24.930] (--) evdev: Sleep Button: Found keys
[    24.930] (II) evdev: Sleep Button: Configuring as keyboard
[    24.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[    24.930] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    24.930] (**) Option "xkb_rules" "evdev"
[    24.930] (**) Option "xkb_model" "pc105"
[    24.930] (**) Option "xkb_layout" "fr"
[    24.930] (**) Option "xkb_variant" "latin9"
[    24.932] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event0)
[    24.932] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    24.932] (**) TypeMatrix.com USB Keyboard: Applying InputClass "Typematrix Bepo"
[    24.932] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard'
[    24.932] (**) TypeMatrix.com USB Keyboard: always reports core events
[    24.932] (**) evdev: TypeMatrix.com USB Keyboard: Device: "/dev/input/event0"
[    24.933] (--) evdev: TypeMatrix.com USB Keyboard: Vendor 0x1e54 Product 0x2030
[    24.933] (--) evdev: TypeMatrix.com USB Keyboard: Found keys
[    24.933] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as keyboard
[    24.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/input/input0/event0"
[    24.933] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 9)
[    24.933] (**) Option "xkb_rules" "evdev"
[    24.933] (**) Option "xkb_model" "pc105"
[    24.933] (**) Option "xkb_layout" "fr"
[    24.933] (**) Option "xkb_variant" "bepo"
[    24.933] (**) Option "xkb_options" "compose:lwin,grp:ctrls_toggle,lv3:ralt_switch"
[    25.046] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event1)
[    25.046] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    25.046] (**) TypeMatrix.com USB Keyboard: Applying InputClass "Typematrix Bepo"
[    25.046] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard'
[    25.046] (**) TypeMatrix.com USB Keyboard: always reports core events
[    25.046] (**) evdev: TypeMatrix.com USB Keyboard: Device: "/dev/input/event1"
[    25.046] (--) evdev: TypeMatrix.com USB Keyboard: Vendor 0x1e54 Product 0x2030
[    25.046] (--) evdev: TypeMatrix.com USB Keyboard: Found 1 mouse buttons
[    25.046] (--) evdev: TypeMatrix.com USB Keyboard: Found scroll wheel(s)
[    25.046] (--) evdev: TypeMatrix.com USB Keyboard: Found relative axes
[    25.046] (II) evdev: TypeMatrix.com USB Keyboard: Forcing relative x/y axes to exist.
[    25.046] (--) evdev: TypeMatrix.com USB Keyboard: Found absolute axes
[    25.046] (II) evdev: TypeMatrix.com USB Keyboard: Forcing absolute x/y axes to exist.
[    25.046] (--) evdev: TypeMatrix.com USB Keyboard: Found keys
[    25.046] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as mouse
[    25.046] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as keyboard
[    25.046] (II) evdev: TypeMatrix.com USB Keyboard: Adding scrollwheel support
[    25.046] (**) evdev: TypeMatrix.com USB Keyboard: YAxisMapping: buttons 4 and 5
[    25.046] (**) evdev: TypeMatrix.com USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.1/input/input1/event1"
[    25.046] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 10)
[    25.046] (**) Option "xkb_rules" "evdev"
[    25.047] (**) Option "xkb_model" "pc105"
[    25.047] (**) Option "xkb_layout" "fr"
[    25.047] (**) Option "xkb_variant" "bepo"
[    25.047] (**) Option "xkb_options" "compose:lwin,grp:ctrls_toggle,lv3:ralt_switch"
[    25.047] (II) evdev: TypeMatrix.com USB Keyboard: initialized for relative axes.
[    25.047] (WW) evdev: TypeMatrix.com USB Keyboard: ignoring absolute axes.
[    25.048] (**) TypeMatrix.com USB Keyboard: (accel) keeping acceleration scheme 1
[    25.048] (**) TypeMatrix.com USB Keyboard: (accel) acceleration profile 0
[    25.048] (**) TypeMatrix.com USB Keyboard: (accel) acceleration factor: 2.000
[    25.048] (**) TypeMatrix.com USB Keyboard: (accel) acceleration threshold: 4
[    25.049] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[    25.049] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    25.049] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    25.049] (**) Logitech USB Optical Mouse: always reports core events
[    25.049] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event2"
[    25.049] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[    25.049] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[    25.049] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    25.049] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    25.049] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    25.049] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    25.049] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    25.049] (**) Option "Emulate3Buttons" "false"
[    25.049] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    25.049] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.049] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb6/6-1/6-1:1.0/input/input2/event2"
[    25.049] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[    25.049] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    25.050] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    25.050] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    25.050] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    25.050] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    25.051] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    25.051] (II) No input driver specified, ignoring this device.
[    25.051] (II) This device may have been added with another device file.
[    25.051] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    25.051] (II) No input driver specified, ignoring this device.
[    25.051] (II) This device may have been added with another device file.
[ 12048.755] (II) config/udev: removing device Logitech USB Optical Mouse
[ 12048.804] (II) evdev: Logitech USB Optical Mouse: Close
[ 12048.813] (II) UnloadModule: "evdev"
[ 12053.013] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 12053.062] (II) No input driver specified, ignoring this device.
[ 12053.062] (II) This device may have been added with another device file.
[ 12053.062] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 12053.062] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 12053.062] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 12053.063] (**) Logitech USB Optical Mouse: always reports core events
[ 12053.063] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event2"
[ 12053.063] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 12053.063] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 12053.063] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 12053.063] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 12053.063] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 12053.063] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 12053.063] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 12053.063] (**) Option "Emulate3Buttons" "false"
[ 12053.063] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 12053.063] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12053.063] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb6/6-1/6-1:1.0/input/input7/event2"
[ 12053.063] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 12053.063] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 12053.064] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 12053.064] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 12053.064] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 12053.064] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 12687.507] (II) config/udev: removing device Logitech USB Optical Mouse
[ 12687.512] (II) evdev: Logitech USB Optical Mouse: Close
[ 12687.512] (II) UnloadModule: "evdev"
[ 12689.842] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 12689.843] (II) No input driver specified, ignoring this device.
[ 12689.843] (II) This device may have been added with another device file.
[ 12689.844] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 12689.844] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 12689.844] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 12689.844] (**) Logitech USB Optical Mouse: always reports core events
[ 12689.844] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event2"
[ 12689.844] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 12689.844] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 12689.844] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 12689.844] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 12689.844] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 12689.844] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 12689.844] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 12689.844] (**) Option "Emulate3Buttons" "false"
[ 12689.844] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 12689.844] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12689.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb6/6-2/6-2:1.0/input/input8/event2"
[ 12689.844] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 12689.844] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 12689.849] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 12689.849] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 12689.849] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 12689.849] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 12764.756] (II) config/udev: removing device Logitech USB Optical Mouse
[ 12764.770] (II) evdev: Logitech USB Optical Mouse: Close
[ 12764.770] (II) UnloadModule: "evdev"
[ 12767.050] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 12767.050] (II) No input driver specified, ignoring this device.
[ 12767.050] (II) This device may have been added with another device file.
[ 12767.054] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 12767.054] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 12767.054] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 12767.054] (**) Logitech USB Optical Mouse: always reports core events
[ 12767.054] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event2"
[ 12767.054] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 12767.054] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 12767.054] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 12767.054] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 12767.054] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 12767.054] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 12767.054] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 12767.054] (**) Option "Emulate3Buttons" "false"
[ 12767.055] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 12767.055] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12767.055] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb6/6-1/6-1:1.0/input/input9/event2"
[ 12767.055] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 12767.055] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 12767.056] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 12767.056] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 12767.056] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 12767.056] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 15201.006] (II) config/udev: removing device Logitech USB Optical Mouse
[ 15201.062] (II) evdev: Logitech USB Optical Mouse: Close
[ 15201.063] (II) UnloadModule: "evdev"
[ 15203.426] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 15203.426] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 15203.426] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 15203.426] (**) Logitech USB Optical Mouse: always reports core events
[ 15203.426] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event2"
[ 15203.426] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 15203.426] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 15203.426] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 15203.426] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 15203.426] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 15203.426] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 15203.426] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 15203.426] (**) Option "Emulate3Buttons" "false"
[ 15203.426] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 15203.426] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15203.426] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb6/6-1/6-1:1.0/input/input10/event2"
[ 15203.426] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 15203.426] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 15203.427] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 15203.427] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 15203.427] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 15203.427] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 15203.438] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 15203.438] (II) No input driver specified, ignoring this device.
[ 15203.438] (II) This device may have been added with another device file.
----
J’ai failli oublié et ça se trouve, c’est pas lié mais mon bureau XFCE dit que ma souris, c’est mon clavier. Une image valant 1000 mots, une capture d’écran s’impose.
Image
Dans le menu déroulant, j’ai bien la souris dans les choix. Et chaque fois que je rebranche et je revérifies, c’est pareil. C’est le clavier en priorité.
----
Voilà, j’espère vous en avoir dit assez.
Si vous avez besoin de sorties de commandes ou de fichiers, n’hésitez pas.
Dernière modification par Fork Bomb le jeu. 04 juil. 2013, 17:08, modifié 1 fois.
Bépo,TypeMatrix, what best ?
---
« Je ne considère pas les femmes comme des objets, je pense qu'elles ont chacune leur propre classe. »
---
Being an adult is quite easy. Earn your own money and forget all your child's dreams.
Okkusenman ! Okkusenman !
Haut
oktoberfest
Maître du Kyudo
Messages : 1855
Inscription : mer. 06 janv. 2010, 13:51
Localisation : Ried - Alsace - France

Re: [Souris] pointeur qui se bloque

Message par oktoberfest »

Salut,

tu n'as mis en place des consignes d'économie d'énergie qui pourraient mettre en veille les ports usb ? Chez moi j'ai eu le souci avec ce genre de commandes :

Code : Tout sélectionner

for usb in /sys/bus/usb/devices/*
  # Mets le port usb en mode idle au bout de 2 secondes
  echo 2 > $usb/power/autosuspend
done
C'est pratique pour les économies d'énergie, mais mon clavier usb marchait beaucoup moins bien :)
La majorité des bugs se situe entre la chaise et le clavier...
Arrêtez de vous prendre la tête avec les partitions... passez au LVM
Haut
Avatar de l’utilisateur
mulanee
Elfe
Messages : 684
Inscription : mar. 08 janv. 2013, 22:02
Localisation : Ile de France

Re: [Souris] pointeur qui se bloque

Message par mulanee »

Ca m'arrive tout le temps, je débranche je rebranche.Je mets ça sur le compte d'une inadéquation matérielle avec arch.
Prochaine étape je reviens à la souris à boule en mini din.
Haut
Avatar de l’utilisateur
Fork Bomb
Daikyu
Messages : 99
Inscription : dim. 29 mai 2011, 15:29
Localisation : Error 404, not found !

Re: [Souris] pointeur qui se blo

Message par Fork Bomb »

oktoberfest a écrit :Salut,
tu n'as mis en place des consignes d'économie d'énergie qui pourraient mettre en veille les ports usb ?
Non.
Enfin… Un économiseur d’écran installé MAIS désactivé, ça compte ?
« Flying toasters » me manquait à une époque.
oktoberfest a écrit : Chez moi j'ai eu le souci avec ce genre de commandes :

Code : Tout sélectionner

for usb in /sys/bus/usb/devices/*
  # Mets le port usb en mode idle au bout de 2 secondes
  echo 2 > $usb/power/autosuspend
done
C'est pratique pour les économies d'énergie, mais mon clavier usb marchait beaucoup moins bien :)
J’ai qu’un « autosleep » dans /sys/power
Pas de « autosuspend ». Et cet « autosleep » est à off
Bépo,TypeMatrix, what best ?
---
« Je ne considère pas les femmes comme des objets, je pense qu'elles ont chacune leur propre classe. »
---
Being an adult is quite easy. Earn your own money and forget all your child's dreams.
Okkusenman ! Okkusenman !
Haut
oktoberfest
Maître du Kyudo
Messages : 1855
Inscription : mer. 06 janv. 2010, 13:51
Localisation : Ried - Alsace - France

Re: [Souris] pointeur qui se bloque

Message par oktoberfest »

Fork Bomb a écrit :Depuis environ deux semaines, le curseur de ma souris se bloque régulièrement.
Si tu regardes dans les logs de pacman, tu as fait quelle mise à jour il y a environ deux semaines ?

Si tu installes le noyau linux-lts, as-tu aussi le souci ?
La majorité des bugs se situe entre la chaise et le clavier...
Arrêtez de vous prendre la tête avec les partitions... passez au LVM
Haut
Avatar de l’utilisateur
Fork Bomb
Daikyu
Messages : 99
Inscription : dim. 29 mai 2011, 15:29
Localisation : Error 404, not found !

Re: [Souris] pointeur qui se bloque

Message par Fork Bomb »

Je ne vois rien de particulier.

Code : Tout sélectionner

grep 2013-06-15 /var/log/pacman.log 
[2013-06-15 00:07] [PACMAN] Running 'pacman -S --noconfirm pacman'
[2013-06-15 00:07] [PACMAN] reinstalled pacman (4.1.1-1)
[2013-06-15 00:07] [PACMAN] Running 'pacman -Syu --noconfirm'
[2013-06-15 00:07] [PACMAN] synchronizing package lists
[2013-06-15 00:07] [PACMAN] starting full system upgrade
[2013-06-15 00:08] [PACMAN] upgraded gvfs (1.16.2-2 -> 1.16.3-1)
[2013-06-15 00:08] [PACMAN] installed js (17.0.0-1)
[2013-06-15 00:08] [PACMAN] upgraded polkit (0.110-2 -> 0.111-1)
[2013-06-15 00:08] [PACMAN] upgraded webkitgtk2 (1.10.2-5 -> 1.10.2-6)
[2013-06-15 00:09] [PACMAN] upgraded wine (1.6rc1-1 -> 1.6rc2-1)
[2013-06-15 21:07] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:07] [PACMAN] synchronizing package lists
[2013-06-15 21:07] [PACMAN] starting full system upgrade
[2013-06-15 21:07] [PACMAN] Running 'pacman -Syu --noconfirm'
[2013-06-15 21:07] [PACMAN] synchronizing package lists
[2013-06-15 21:08] [PACMAN] starting full system upgrade
[2013-06-15 21:09] [PACMAN] upgraded calibre (0.9.34-1 -> 0.9.35-1)
[2013-06-15 21:09] [PACMAN] upgraded graphite (1:1.2.2-1 -> 1:1.2.3-1)
[2013-06-15 21:10] [PACMAN] upgraded vim-runtime (7.3.1145-1 -> 7.3.1200-1)
[2013-06-15 21:10] [PACMAN] upgraded gvim (7.3.1145-1 -> 7.3.1200-1)
[2013-06-15 21:10] [PACMAN] upgraded p7zip (9.20.1-6 -> 9.20.1-7)
[2013-06-15 21:11] [PACMAN] upgraded ttf-tibetan-machine (1.901-5 -> 1.901-6)
[2013-06-15 21:13] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:13] [PACMAN] synchronizing package lists
[2013-06-15 21:13] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:13] [PACMAN] synchronizing package lists
[2013-06-15 21:13] [PACMAN] starting full system upgrade
[2013-06-15 21:14] [PACMAN] Running 'pacman -Syu --noconfirm'
[2013-06-15 21:14] [PACMAN] synchronizing package lists
[2013-06-15 21:14] [PACMAN] starting full system upgrade
[2013-06-15 21:17] [PACMAN] upgraded ttf-ubraille (001.000-6 -> 001.000-7)
[2013-06-15 21:17] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:17] [PACMAN] synchronizing package lists
[2013-06-15 21:17] [PACMAN] starting full system upgrade
[2013-06-15 21:18] [PACMAN] upgraded usbutils (006-1 -> 007-1)
[2013-06-15 21:18] [PACMAN] upgraded webkitgtk2 (1.10.2-6 -> 1.10.2-7)
[2013-06-15 21:18] [PACMAN] Running 'pacman -Syu --noconfirm'
[2013-06-15 21:18] [PACMAN] synchronizing package lists
[2013-06-15 21:18] [PACMAN] starting full system upgrade
[2013-06-15 21:22] [PACMAN] Running 'pacman -S --noconfirm dbus-python pyqt cups'
[2013-06-15 21:23] [PACMAN] reinstalled python2-dbus (1.1.1-2)
[2013-06-15 21:23] [PACMAN] installed python-sip (4.14.6-1)
[2013-06-15 21:23] [PACMAN] installed python-dbus (1.1.1-2)
[2013-06-15 21:23] [PACMAN] installed pyqt (4.10.1-1)
[2013-06-15 21:23] [PACMAN] installed qpdf (4.1.0-1)
[2013-06-15 21:23] [PACMAN] installed cups-filters (1.0.34-4)
[2013-06-15 21:23] [ALPM-SCRIPTLET] >> If you use an HTTPS connection to CUPS, the first time you access
[2013-06-15 21:23] [ALPM-SCRIPTLET] >> the interface it may take a very long time before the site comes up.
[2013-06-15 21:23] [ALPM-SCRIPTLET] >> This is because the first request triggers the generation of the CUPS
[2013-06-15 21:23] [ALPM-SCRIPTLET] >> SSL certificates which can be a very time-consuming job.
[2013-06-15 21:23] [PACMAN] installed cups (1.6.2-2)
[2013-06-15 21:23] [PACMAN] Running 'pacman -S --noconfirm hplip'
[2013-06-15 21:25] [PACMAN] installed foomatic-db (1:4.0.17_20130518-1)
[2013-06-15 21:25] [PACMAN] installed foomatic-filters (1:4.0.17_20130518-1)
[2013-06-15 21:25] [PACMAN] installed foomatic-db-engine (1:4.0.17_20130518-1)
[2013-06-15 21:25] [PACMAN] installed net-snmp (5.7.2-7)
[2013-06-15 21:25] [ALPM-SCRIPTLET] 
[2013-06-15 21:25] [ALPM-SCRIPTLET] NOTE
[2013-06-15 21:25] [ALPM-SCRIPTLET] ----
[2013-06-15 21:25] [ALPM-SCRIPTLET] # If you want to use this driver with sane:
[2013-06-15 21:25] [ALPM-SCRIPTLET] #  echo "hpaio" >> /etc/sane.d/dll.conf
[2013-06-15 21:25] [ALPM-SCRIPTLET] 
[2013-06-15 21:25] [PACMAN] installed hplip (3.13.5-2)
[2013-06-15 21:56] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:56] [PACMAN] synchronizing package lists
[2013-06-15 21:56] [PACMAN] starting full system upgrade
[2013-06-15 21:57] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:57] [PACMAN] synchronizing package lists
[2013-06-15 21:57] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:57] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:57] [PACMAN] synchronizing package lists
[2013-06-15 21:57] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:57] [PACMAN] synchronizing package lists
[2013-06-15 21:58] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:58] [PACMAN] synchronizing package lists
[2013-06-15 21:58] [PACMAN] Running 'pacman -Syu'
[2013-06-15 21:58] [PACMAN] synchronizing package lists
[2013-06-15 22:00] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:00] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:00] [PACMAN] synchronizing package lists
[2013-06-15 22:00] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:00] [PACMAN] synchronizing package lists
[2013-06-15 22:00] [PACMAN] starting full system upgrade
[2013-06-15 22:00] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:00] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:01] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:01] [PACMAN] synchronizing package lists
[2013-06-15 22:01] [PACMAN] starting full system upgrade
[2013-06-15 22:01] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:01] [PACMAN] synchronizing package lists
[2013-06-15 22:01] [PACMAN] starting full system upgrade
[2013-06-15 22:01] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:01] [PACMAN] synchronizing package lists
[2013-06-15 22:01] [PACMAN] starting full system upgrade
[2013-06-15 22:02] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:02] [PACMAN] synchronizing package lists
[2013-06-15 22:02] [PACMAN] starting full system upgrade
[2013-06-15 22:02] [PACMAN] Running 'pacman -Syu --noconfirm'
[2013-06-15 22:02] [PACMAN] synchronizing package lists
[2013-06-15 22:02] [PACMAN] starting full system upgrade
[2013-06-15 22:05] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:05] [PACMAN] synchronizing package lists
[2013-06-15 22:05] [PACMAN] starting full system upgrade
[2013-06-15 22:05] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:05] [PACMAN] synchronizing package lists
[2013-06-15 22:05] [PACMAN] starting full system upgrade
[2013-06-15 22:05] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:05] [PACMAN] synchronizing package lists
[2013-06-15 22:05] [PACMAN] starting full system upgrade
[2013-06-15 22:05] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:05] [PACMAN] synchronizing package lists
[2013-06-15 22:06] [PACMAN] starting full system upgrade
[2013-06-15 22:06] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:06] [PACMAN] synchronizing package lists
[2013-06-15 22:06] [PACMAN] starting full system upgrade
[2013-06-15 22:06] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:06] [PACMAN] synchronizing package lists
[2013-06-15 22:06] [PACMAN] starting full system upgrade
[2013-06-15 22:06] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:06] [PACMAN] synchronizing package lists
[2013-06-15 22:06] [PACMAN] starting full system upgrade
[2013-06-15 22:06] [PACMAN] Running 'pacman -Syu'
[2013-06-15 22:06] [PACMAN] synchronizing package lists
[2013-06-15 22:06] [PACMAN] starting full system upgrade
[2013-06-15 22:32] [PACMAN] Running 'pacman -S --noconfirm pacman'
[2013-06-15 22:32] [PACMAN] reinstalled pacman (4.1.1-1)
[2013-06-15 22:32] [PACMAN] Running 'pacman -Syu --noconfirm'
[2013-06-15 22:32] [PACMAN] synchronizing package lists
[2013-06-15 22:32] [PACMAN] starting full system upgrade
[2013-06-15 22:49] [PACMAN] Running 'pacman -S squash-tools'
[2013-06-15 22:50] [PACMAN] Running 'pacman -S squashfs-tools'
[2013-06-15 22:50] [PACMAN] installed squashfs-tools (4.2-4)
[2013-06-15 22:57] [PACMAN] Running 'pacman -S lzma'
[2013-06-15 22:57] [PACMAN] Running 'pacman -S lrzip'
[2013-06-15 22:57] [PACMAN] installed lrzip (0.614-1)
[2013-06-15 23:23] [PACMAN] Running 'pacman --color auto -S --asdeps --needed qt'
[2013-06-15 23:24] [PACMAN] installed qt5-graphicaleffects (5.0.2-2)
[2013-06-15 23:24] [PACMAN] installed qt5-imageformats (5.0.2-2)
[2013-06-15 23:24] [PACMAN] installed qt5-multimedia (5.0.2-2)
[2013-06-15 23:24] [PACMAN] installed qt5-script (5.0.2-2)
[2013-06-15 23:24] [PACMAN] installed qt5-quick1 (5.0.2-2)
[2013-06-15 23:24] [PACMAN] installed qt5-svg (5.0.2-2)
[2013-06-15 23:24] [PACMAN] installed qt5-translations (5.0.2-2)
[2013-06-15 23:24] [PACMAN] installed qt5-tools (5.0.2-2)
[2013-06-15 23:24] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt'
[2013-06-15 23:25] [PACMAN] reinstalled qt5-base (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-jsbackend (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-xmlpatterns (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-declarative (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-graphicaleffects (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-imageformats (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-multimedia (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-webkit (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-script (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-quick1 (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-svg (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-translations (5.0.2-2)
[2013-06-15 23:25] [PACMAN] reinstalled qt5-tools (5.0.2-2)
[2013-06-15 23:26] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-root/PKGDEST.x7S/squashfs3-tools-3.4-2-i686.pkg.tar.xz'
[2013-06-15 23:26] [PACMAN] installed squashfs3-tools (3.4-2)
[2013-06-15 23:27] [PACMAN] Running 'pacman --color auto -S --asdeps --needed qt'
[2013-06-15 23:27] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt'
[2013-06-15 23:27] [PACMAN] reinstalled qt5-base (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-jsbackend (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-xmlpatterns (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-declarative (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-graphicaleffects (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-imageformats (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-multimedia (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-webkit (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-script (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-quick1 (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-svg (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-translations (5.0.2-2)
[2013-06-15 23:27] [PACMAN] reinstalled qt5-tools (5.0.2-2)
[2013-06-15 23:45] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:45] [PACMAN] synchronizing package lists
[2013-06-15 23:45] [PACMAN] starting full system upgrade
[2013-06-15 23:46] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:46] [PACMAN] synchronizing package lists
[2013-06-15 23:46] [PACMAN] starting full system upgrade
[2013-06-15 23:46] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:46] [PACMAN] synchronizing package lists
[2013-06-15 23:46] [PACMAN] starting full system upgrade
[2013-06-15 23:47] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:47] [PACMAN] synchronizing package lists
[2013-06-15 23:47] [PACMAN] starting full system upgrade
[2013-06-15 23:47] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:47] [PACMAN] synchronizing package lists
[2013-06-15 23:47] [PACMAN] starting full system upgrade
[2013-06-15 23:48] [PACMAN] Running 'pacman -S zip'
[2013-06-15 23:48] [PACMAN] reinstalled zip (3.0-3)
[2013-06-15 23:53] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:53] [PACMAN] synchronizing package lists
[2013-06-15 23:53] [PACMAN] starting full system upgrade
[2013-06-15 23:53] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:53] [PACMAN] synchronizing package lists
[2013-06-15 23:53] [PACMAN] starting full system upgrade
[2013-06-15 23:53] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:53] [PACMAN] synchronizing package lists
[2013-06-15 23:53] [PACMAN] starting full system upgrade
[2013-06-15 23:53] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:53] [PACMAN] synchronizing package lists
[2013-06-15 23:53] [PACMAN] starting full system upgrade
[2013-06-15 23:54] [PACMAN] Running 'pacman -Syu'
[2013-06-15 23:54] [PACMAN] synchronizing package lists
[2013-06-15 23:54] [PACMAN] starting full system upgrade
[2013-06-15 23:54] [PACMAN] Running 'pacman -S zip'
[2013-06-15 23:54] [PACMAN] reinstalled zip (3.0-3)
[2013-06-15 23:54] [PACMAN] Running 'pacman -S zip'
[2013-06-15 23:57] [PACMAN] Running 'pacman -S zip'
[2013-06-15 23:57] [PACMAN] Running 'pacman -S --noconfirm zip'
[2013-06-15 23:57] [PACMAN] reinstalled zip (3.0-3)
[2013-06-15 23:57] [PACMAN] Running 'pacman -S --noconfirm zip'
[2013-06-15 23:57] [PACMAN] reinstalled zip (3.0-3)
[2013-06-15 23:58] [PACMAN] Running 'pacman -S --noconfirm zip'
[2013-06-15 23:58] [PACMAN] reinstalled zip (3.0-3)
[2013-06-15 23:58] [PACMAN] Running 'pacman -S --noconfirm zip'
[2013-06-15 23:58] [PACMAN] reinstalled zip (3.0-3)
[2013-06-15 23:59] [PACMAN] Running 'pacman -S --noconfirm zip'
[2013-06-15 23:59] [PACMAN] reinstalled zip (3.0-3)
[2013-06-15 23:59] [PACMAN] Running 'pacman -S --noconfirm zip'
[2013-06-15 23:59] [PACMAN] reinstalled zip (3.0-3)
Pour le -lts, j’installe, je reboote et je te dis.
---
Bon. J’ai installé le kernel lts et j’ai booté dessus.
J’avais vu « nvidia-lts » dans ma recherche mais il est incompatible avec mon « nvidia-173xx » (GeForce 5500), du coup j’ai remis Nouveau à la place.
Les polices sont légèrement floues mais je ferais des recheches pour ça.
Désormais — ça m’est arrivé 2 fois depuis le reboot — quand la souris se bloque, ça dure deux secondes. J’imagine que le kernel relance le service.
Bref, jusqu’à preuve du contraire on va dire que le problème — sans être résolu — est contourné.
++
Bépo,TypeMatrix, what best ?
---
« Je ne considère pas les femmes comme des objets, je pense qu'elles ont chacune leur propre classe. »
---
Being an adult is quite easy. Earn your own money and forget all your child's dreams.
Okkusenman ! Okkusenman !
Haut
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10707
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [Souris] pointeur qui se bloque (Contourné)

Message par FoolEcho »

Fork Bomb a écrit :J’avais vu « nvidia-lts » dans ma recherche mais il est incompatible avec mon « nvidia-173xx » (GeForce 5500), du coup j’ai remis Nouveau à la place.
Pour info, nvidia-173xx-lts existe pour ça.
«The following statement is not true. The previous statement is true.» :nage:
Haut
Avatar de l’utilisateur
Youpi
yeomen
Messages : 252
Inscription : sam. 16 juin 2012, 22:44

Re: [Souris] pointeur qui se bloque (Contourné)

Message par Youpi »

décidément, c'est un jour funeste pour la souris....=> lien
Arch 64 bit + Kernel ck-corex + Tint2 et fbpanel + OpenBox + Bumblebee + conky + eclipse et matlab
navigateur internet : iron (yaourt iron-bin)
Haut
Répondre

Revenir à « Installation et configuration »