Bonjour, merci pour ta réponse.
Jviens de reboot pour avoir un journal recent. Déjà je peux supprimer le dernier point. "100% du temps à l'écran de log au démarrage, le curseur bloque sur les bords de l'écran en hdmi". Vu l'heure qu'il était hier, j'avais pas percuté un truc aussi simple. Le curseur bloque sur l'écran de droite, mais sur le bord gauche... Il fait correctement la liaison en allait vers le bord droit. Donc il considère que c'est l'écran 1 au demarrage seulement. Ca doit se modifier facilement ça. Je verrai ça une fois mon message terminé.
Je viens d'essayer de reboot jusqu'à avoir le problème. Quand ça arrive, j'ai essayé de me deconnecter de ma session, l'écran qui pose problème se met immédiatement en mode "hors plage"
J'avais trouvé cette page hier soir
https://wiki.archlinux.org/index.php/Xr ... 2-monitors mais vu l'heure je me suis dit que je verrai ça demain.
J'ai une GTX1050
Code : Tout sélectionner
xrandr
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
DVI-D-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+
1680x1050 59.95
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x720 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
HDMI-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.00*+ 59.94 50.00
1680x1050 59.95
1600x900 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
Code : Tout sélectionner
dmesg | grep -i fail
[ 0.064061] ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
[ 0.064073] ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170831/psparse-550)
[ 0.064435] ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
[ 0.064443] ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170831/psparse-550)
[ 4.740618] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.740620] cfg80211: failed to load regulatory.db
[ 5.616982] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 5.617026] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 5.646239] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
Code : Tout sélectionner
journalctl -xb |grep -i fail
avril 14 11:38:04 Arch kernel: ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
avril 14 11:38:04 Arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170831/psparse-550)
avril 14 11:38:04 Arch kernel: ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
avril 14 11:38:04 Arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170831/psparse-550)
avril 14 11:38:06 Arch kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
avril 14 11:38:06 Arch kernel: cfg80211: failed to load regulatory.db
avril 14 11:38:06 Arch systemd[1]: Failed to parse swap priority "defaults,pri=-2", ignoring: Numerical result out of range
avril 14 11:38:07 Arch kernel: ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
avril 14 11:38:07 Arch kernel: ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
avril 14 11:38:07 Arch kernel: ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
avril 14 11:38:15 Arch sddm-greeter[433]: inotify_add_watch("/usr/share/wayland-sessions") failed: "No such file or directory"
avril 14 11:38:15 Arch ntpd[394]: bind(24) AF_INET6 fe80::35ff:9ffa:7ce8:b9c4%2#123 flags 0x11 failed: Cannot assign requested address
avril 14 11:38:15 Arch ntpd[394]: failed to init interface for address fe80::35ff:******
avril 14 11:38:38 Arch dbus-daemon[501]: [session uid=1000 pid=501] Activated service 'org.kde.kwalletd' failed: Failed to execute program org.kde.kwalletd: No such file or directory
avril 14 11:38:38 Arch kwin_x11[584]: "\"fsrestore1\" - conversion of \"0,0,0,0\" to QRect failed"
avril 14 11:38:40 Arch org_kde_powerdevil[628]: powerdevil: org.kde.powerdevil.backlighthelper.brightness failed
avril 14 11:38:43 Arch korgac[657]: "\"CalendarsLastChecked\" - conversion of \"0,0,0,-1,-1,-1\" to QDateTime failed"
avril 14 11:38:44 Arch dbus-daemon[371]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service not found.
avril 14 11:38:48 Arch plasmashell[597]: libkcups: Request failed 1282 -1
avril 14 11:38:50 Arch kdeinit5[534]: modemmanager-qt: Failed enumerating MM objects: "org.freedesktop.systemd1.NoSuchUnit"
avril 14 11:38:50 Arch dbus-daemon[371]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service not found.
avril 14 11:38:50 Arch dbus-daemon[371]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service not found.
avril 14 11:39:06 Arch dbus-daemon[371]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service not found.
avril 14 11:40:37 Arch dbus-daemon[501]: [session uid=1000 pid=501] Failed to activate service 'org.freedesktop.Telepathy.Client.KTp.KdedIntegrationModule': timed out (service_start_timeout=120000ms)
Code : Tout sélectionner
[ 37.051] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 37.051] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 37.051] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 37.051] (--) NVIDIA(GPU-0):
[ 264.937] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VC239 (DFP-0): connected
[ 264.937] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VC239 (DFP-0): Internal TMDS
[ 264.937] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VC239 (DFP-0): 330.0 MHz maximum pixel clock
[ 264.937] (--) NVIDIA(GPU-0):
[ 264.966] (--) NVIDIA(GPU-0): Samsung S23B350 (DFP-1): connected
[ 264.966] (--) NVIDIA(GPU-0): Samsung S23B350 (DFP-1): Internal TMDS
[ 264.966] (--) NVIDIA(GPU-0): Samsung S23B350 (DFP-1): 600.0 MHz maximum pixel clock
[ 264.966] (--) NVIDIA(GPU-0):
[ 264.966] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 264.966] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 264.966] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 264.966] (--) NVIDIA(GPU-0):
[ 264.966] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 264.966] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 264.966] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 264.966] (--) NVIDIA(GPU-0):
L'ACPI error, j'ai lu y'a pas mal de temps que c'était une erreur liée à la gestion de l'énérgie, qu'on pouvait ignorer sans problème. Les 5 autres en dessous sont liées aux périphériques wifi, j'ai rien installé en ce qui concerne le wifi, donc à priori, c'est normal. Si j'ai bien compris, je peux résoudre les erreurs 5 et 6 en installant le module crda.