[Ouverture de dossiers] Temps d'ouverture

Questions et astuces concernant l'installation et la configuration d'archlinux
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

[Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Bonjour à tous,

Le confinement donne un peu de temps libre pour poser des questions sur des détails de configuration sans trop d'importance mais que l'on aimerait malgré tout comprendre voire améliorer.

Le détail du jour concerne le temps d'ouverture d'un 1er dossier (quel qu'il soit) via l'explorateur de fichiers après boot qui est de l'ordre de 10 secondes. Après cette 1re ouverture, les ouvertures suivantes et la navigation sont instantanées.
Rien de rédhibitoire, je ne suis pas à 10 s près mais bon, si on peut améliorer...

Je pense que c'est en lien avec le montage non automatique des volumes de mon NAS en NFS4 mais sûr de rien.

Mon fstab :

Code : Tout sélectionner

# Static information about the filesystems.
# See fstab(5) for details.

# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1
UUID=6f47dedc-f9d9-4bed-8686-332db94c04c9	/         	ext4      	rw,relatime	0 1

# /dev/sda3
UUID=57b140b9-e7ed-42d6-a03b-dba4ff5d4e3a	/home     	ext4      	rw,relatime	0 2

# /dev/sda2
UUID=3ac03828-033f-417a-b427-f4416b471c5d	none      	swap      	defaults,pri=-2	0 0


192.168.0.30:/Eric /media/Eric nfs4  users,noauto,fg,retry=1,hard,rsize=16384,wsize=16384,timeo=300,retrans=2,_netdev 0 0
192.168.0.30:/VeroChon /media/VeroChon nfs4  users,noauto,fg,retry=1,hard,rsize=16384,wsize=16384,timeo=300,retrans=2,_netdev 0 0
192.168.0.30:/Multimedia /media/Multimedia nfs4  users,noauto,fg,retry=1,hard,rsize=16384,wsize=16384,timeo=300,retrans=2,_netdev 0 0
Grand merci par avance pour les avis éclairés.
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
benjarobin
Maître du Kyudo
Messages : 16017
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Ouverture de dossiers] Temps d'ouverture

Message par benjarobin »

Bonjour,
Cela est en effet dû au fait que le montage ne se fasse pas en tache de fond, mais uniquement quand tu le demandes.
Mais le temps de 10s est bien trop long, normalement cela devrait prendre moins d'une seconde.
Ton NAS n'aurais pas les disques dur en veille et c'est juste le temps de "réveiller" ton NAS ?
Tu peux le vérifier en montant le dossier comme avant, redémarrer et dans la minute (voir moins si tu peux) refaire le montage (en théorie cela devrai être plus rapide, ou alors le disque ce met très rapidement en veille)
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Bonjour à tous et merci pour la réponse Benjarobin.
benjarobin a écrit :
mar. 05 mai 2020, 19:08
Ton NAS n'aurais pas les disques dur en veille et c'est juste le temps de "réveiller" ton NAS ?
Tu peux le vérifier en montant le dossier comme avant, redémarrer et dans la minute (voir moins si tu peux) refaire le montage (en théorie cela devrai être plus rapide, ou alors le disque ce met très rapidement en veille)
J'ai fait la manip, le problème reste entier, mais je ne croyais pas trop à un problème de veille du NAS parce que ce temps de 10 s n'est valable qu'à la 1re ouverture de l'explorateur de fichiers après boot (quelque soit le dossier ouvert à ce moment y compris le home). Ensuite, tant que je ne reboote pas le PC, l'ouverture de n'importe quel dossier ou montage présent sur mon bureau est instantanée. Ce matin par exemple, au réveil de mon PC (sans boot donc), l'ouverture de l'un de mes montages du NAS a été instantanée même si il a dormi un peu cette nuit.
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Du coup, j'ai fait un autre test en coupant les montages du NAS (j'ai commenté les lignes dans fstab).
Après reboot, les montages du NAS ont bien disparu du bureau et il a quand même fallu 10 s pour la 1re ouverture de mon home.
Le NAS pourrait donc être totalement étranger à cette histoire ? :?:
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
benjarobin
Maître du Kyudo
Messages : 16017
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Ouverture de dossiers] Temps d'ouverture

Message par benjarobin »

Ah, je n'avais pas compris la question, tu demandes juste pourquoi l'ouverture de ton explorateur de fichier prend 10s la première fois ?
Peux tu détailler un peu plus, qu'est ce que tu fais exactement, tu cliques sur quoi, tu lances quoi et comment, toute la séquence.

Peux tu donner un peu plus de détails sur l'environnement de bureau que tu utilises et l'explorateur de fichiers que tu utilises ?
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Merci Benjarobin.
benjarobin a écrit :
mer. 06 mai 2020, 09:06
tu demandes juste pourquoi l'ouverture de ton explorateur de fichier prend 10s la première fois ?
Maintenant que le NAS semble être hors de cause, oui c'est bien ça.
benjarobin a écrit :
mer. 06 mai 2020, 09:06
Peux tu détailler un peu plus, qu'est ce que tu fais exactement, tu cliques sur quoi, tu lances quoi et comment, toute la séquence.
À partir du bureau, je double-clique sur un dossier, par exemple le home, et j'attends 10 s qu'il s'ouvre.
benjarobin a écrit :
mer. 06 mai 2020, 09:06
Peux tu donner un peu plus de détails sur l'environnement de bureau que tu utilises et l'explorateur de fichiers que tu utilises ?

Code : Tout sélectionner

Gestionnaire de fenêtres (xfwm4)
Gère le placement des fenêtres sur l’écran.

Tableau de bord (xfce4-panel)
Lanceurs de programme, boutons des fenêtres, menu des applications, changeur d’espace de travail et plus.

Gestionnaire du bureau (xfdesktop)
Définit la couleur ou l’image d’arrière-plan avec un menu des applications optionnel ou des icônes pour les applications minimisées ou des lanceurs, périphériques et dossiers.

Gestionnaire de fichiers (thunar)
Un gestionnaire de fichier moderne pour le bureau Unix/Linux, se voulant simple d’utilisation et rapide.

Gestionnaire de volumes (thunar-volman)
Gestion automatique des disques et médias amovibles pour Thunar.

Gestionnaire de sessions (xfce4-session)
Restaure votre session au démarrage et vous permet d’éteindre l’ordinateur depuis Xfce.

Paramètres système (xfce4-settings)
Système de configuration contrôlant différents aspects du bureau tels que l’apparence, l’écran ou les paramètres du clavier et de la souris.

Liste des applications (xfce4-appfinder)
Affiche les applications installées sur votre système par catégories, afin que vous puissiez rapidement les trouver et les lancer.

Service des paramètres (xfconf)
Système de stockage de configuration basé sur D-Bus.

Une bibliothèque de menus (garcon)
Une implémentation de menus compatible freedesktop.org basée sur GLib et GIO.

Service de miniatures (tumbler)
Service de miniatures implémentant la spécification D-Bus de gestion des miniatures.
Copie de "À propos de Xfce".
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
Avatar de l’utilisateur
CoudUr
yeomen
Messages : 217
Inscription : sam. 06 avr. 2013, 17:12

Re: [Ouverture de dossiers] Temps d'ouverture

Message par CoudUr »

Bonjour,

Dans une console tu lances thunar , et dans une autre tu lis les messages de journactl et dmesg, il y aura sûrement une erreur visible quelque part avec un peu de chance.
benjarobin
Maître du Kyudo
Messages : 16017
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Ouverture de dossiers] Temps d'ouverture

Message par benjarobin »

Si tu fermes ta session, après l'avoir ré-ouverte dans la foulé, as tu ce même délai lors de l'ouverture de l'explorateur de fichiers
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Bonjour et merci pour les réponses.
CoudUr a écrit :
mer. 06 mai 2020, 16:56
Dans une console tu lances thunar , et dans une autre tu lis les messages de journactl et dmesg, il y aura sûrement une erreur visible quelque part avec un peu de chance.

Code : Tout sélectionner

[chon@Chon1404 ~]$ journalctl
-- Logs begin at Sat 2018-08-11 12:00:04 CEST, end at Thu 2020-05-07 07:55:49 C>
août 11 12:00:04 Chon1404 kernel: Linux version 4.17.13-arch1-1-ARCH (builduser>
août 11 12:00:04 Chon1404 kernel: Command line: BOOT_IMAGE=../vmlinuz-linux roo>
août 11 12:00:04 Chon1404 kernel: KERNEL supported cpus:
août 11 12:00:04 Chon1404 kernel:   Intel GenuineIntel
août 11 12:00:04 Chon1404 kernel:   AMD AuthenticAMD
août 11 12:00:04 Chon1404 kernel:   Centaur CentaurHauls
août 11 12:00:04 Chon1404 kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87>
août 11 12:00:04 Chon1404 kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE>
août 11 12:00:04 Chon1404 kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX>
août 11 12:00:04 Chon1404 kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes>
août 11 12:00:04 Chon1404 kernel: x86/fpu: Enabled xstate features 0x7, context>
août 11 12:00:04 Chon1404 kernel: e820: BIOS-provided physical RAM map:
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x0000000000000000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x000000000009d800-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cac1e000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cac25000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cb486000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cb701000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000db2c6000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000db34e000-0x00000000>
lines 1-23
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Code : Tout sélectionner

[chon@Chon1404 ~]$ dmesg
[    0.023177] No NUMA configuration found
[    0.023178] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.023183] NODE_DATA(0) allocated [mem 0x21fdfa000-0x21fdfdfff]
[    0.023213] Zone ranges:
[    0.023214]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.023216]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.023217]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.023218]   Device   empty
[    0.023219] Movable zone start for each node
[    0.023220] Early memory node ranges
[    0.023221]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.023223]   node   0: [mem 0x0000000000100000-0x00000000cac1dfff]
[    0.023224]   node   0: [mem 0x00000000cac25000-0x00000000cb485fff]
[    0.023225]   node   0: [mem 0x00000000cb701000-0x00000000db2c5fff]
[    0.023226]   node   0: [mem 0x00000000db34e000-0x00000000db4aafff]
[    0.023227]   node   0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[    0.023228]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.023474] Zeroed struct page in unavailable ranges: 20674 pages
[    0.023475] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.023478] On node 0 totalpages: 2076478
[    0.023479]   DMA zone: 64 pages used for memmap
[    0.023480]   DMA zone: 21 pages reserved
[    0.023482]   DMA zone: 3996 pages, LIFO batch:0
[    0.023562]   DMA32 zone: 13959 pages used for memmap
[    0.023563]   DMA32 zone: 893346 pages, LIFO batch:63
[    0.039880]   Normal zone: 18424 pages used for memmap
[    0.039881]   Normal zone: 1179136 pages, LIFO batch:63
[    0.060549] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff]
[    0.060629] ACPI: PM-Timer IO Port: 0x1808
[    0.060632] ACPI: Local APIC address 0xfee00000
[    0.060640] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.060652] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.060655] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.060657] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.060658] ACPI: IRQ0 used by override.
[    0.060660] ACPI: IRQ9 used by override.
[    0.060662] Using ACPI (MADT) for SMP configuration information
[    0.060664] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.060670] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x20 (or later)
[    0.060672] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.060697] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.060700] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.060701] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.060701] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.060702] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.060704] PM: hibernation: Registered nosave memory: [mem 0xcac1e000-0xcac24fff]
[    0.060706] PM: hibernation: Registered nosave memory: [mem 0xcb486000-0xcb700fff]
[    0.060708] PM: hibernation: Registered nosave memory: [mem 0xdb2c6000-0xdb34dfff]
[    0.060710] PM: hibernation: Registered nosave memory: [mem 0xdb4ab000-0xdb9dafff]
[    0.060711] PM: hibernation: Registered nosave memory: [mem 0xdb9db000-0xdbffefff]
[    0.060713] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.060714] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.060715] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.060716] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.060717] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.060718] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.060718] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.060719] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.060720] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.060721] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.060722] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.060723] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.060723] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.060724] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.060727] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.060728] Booting paravirtualized kernel on bare hardware
[    0.060732] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.067068] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.067371] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u524288
[    0.067380] pcpu-alloc: s196608 r8192 d28672 u524288 alloc=1*2097152
[    0.067381] pcpu-alloc: [0] 0 1 2 3 
[    0.067410] Built 1 zonelists, mobility grouping on.  Total pages: 2044010
[    0.067411] Policy zone: Normal
[    0.067413] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=UUID=6f47dedc-f9d9-4bed-8686-332db94c04c9 rw quiet initrd=../initramfs-linux.img
[    0.068184] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.068530] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.068596] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.106126] Memory: 8055564K/8305912K available (12291K kernel code, 1463K rwdata, 4504K rodata, 1620K init, 3220K bss, 250348K reserved, 0K cma-reserved)
[    0.106134] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[    0.106292] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.106307] Kernel/User page tables isolation: enabled
[    0.106326] ftrace: allocating 40157 entries in 157 pages
[    0.127348] ftrace: allocated 157 pages with 5 groups
[    0.127475] rcu: Preemptible hierarchical RCU implementation.
[    0.127476] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.127477] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.127478] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.127479] 	Tasks RCU enabled.
[    0.127480] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.127481] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.131716] NR_IRQS: 20736, nr_irqs: 728, preallocated irqs: 16
[    0.133283] Console: colour VGA+ 80x25
[    0.133288] printk: console [tty0] enabled
[    0.133310] ACPI: Core revision 20200110
[    0.133460] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.133471] APIC: Switch to symmetric I/O mode setup
[    0.133474] DMAR: Host address width 39
[    0.133475] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.133481] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.133482] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.133486] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.133487] DMAR: RMRR base: 0x000000dbe9e000 end: 0x000000dbeacfff
[    0.133489] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[    0.133494] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.133495] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.133496] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.134161] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.134162] x2apic enabled
[    0.134168] Switched APIC routing to cluster x2apic.
[    0.134812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.150142] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x187293e0c93, max_idle_ns: 440795278808 ns
[    0.150148] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.43 BogoMIPS (lpj=5653500)
[    0.150151] pid_max: default: 32768 minimum: 301
[    0.150190] LSM: Security Framework initializing
[    0.150196] Yama: becoming mindful.
[    0.150236] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.150261] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.150278] *** VALIDATE tmpfs ***
[    0.150464] *** VALIDATE proc ***
[    0.150527] *** VALIDATE cgroup ***
[    0.150529] *** VALIDATE cgroup2 ***
[    0.150593] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.150609] process: using mwait in idle threads
[    0.150612] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.150613] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.150617] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.150618] Spectre V2 : Mitigation: Full generic retpoline
[    0.150619] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.150620] Speculative Store Bypass: Vulnerable
[    0.150624] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.150943] Freeing SMP alternatives memory: 32K
[    0.259009] smpboot: CPU0: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1)
[    0.276820] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.276848] ... version:                3
[    0.276849] ... bit width:              48
[    0.276849] ... generic registers:      4
[    0.276850] ... value mask:             0000ffffffffffff
[    0.276851] ... max period:             00007fffffffffff
[    0.276852] ... fixed-purpose events:   3
[    0.276853] ... event mask:             000000070000000f
[    0.283481] rcu: Hierarchical SRCU implementation.
[    0.306958] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.313484] smp: Bringing up secondary CPUs ...
[    0.353497] x86: Booting SMP configuration:
[    0.353499] .... node  #0, CPUs:      #1 #2
[    0.393965] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.433498]  #3
[    0.433936] smp: Brought up 1 node, 4 CPUs
[    0.433936] smpboot: Max logical packages: 1
[    0.433936] smpboot: Total of 4 processors activated (13573.75 BogoMIPS)
[    0.435511] devtmpfs: initialized
[    0.435511] x86/mm: Memory block size: 128MB
[    0.436850] PM: Registering ACPI NVS region [mem 0xcac1e000-0xcac24fff] (28672 bytes)
[    0.436852] PM: Registering ACPI NVS region [mem 0xdb4ab000-0xdb9dafff] (5439488 bytes)
[    0.437070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.437070] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.437070] pinctrl core: initialized pinctrl subsystem
[    0.437070] PM: RTC time: 05:52:21, date: 2020-05-07
[    0.437070] thermal_sys: Registered thermal governor 'fair_share'
[    0.437070] thermal_sys: Registered thermal governor 'bang_bang'
[    0.437070] thermal_sys: Registered thermal governor 'step_wise'
[    0.437070] thermal_sys: Registered thermal governor 'user_space'
[    0.437070] thermal_sys: Registered thermal governor 'power_allocator'
[    0.437174] NET: Registered protocol family 16
[    0.437280] audit: initializing netlink subsys (disabled)
[    0.437296] audit: type=2000 audit(1588830741.303:1): state=initialized audit_enabled=0 res=1
[    0.437296] cpuidle: using governor ladder
[    0.437296] cpuidle: using governor menu
[    0.437296] ACPI: bus type PCI registered
[    0.437296] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.437296] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.437296] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.437296] PCI: Using configuration type 1 for base access
[    0.437296] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.437435] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.440254] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.440254] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.443629] ACPI: Added _OSI(Module Device)
[    0.443630] ACPI: Added _OSI(Processor Device)
[    0.443631] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.443633] ACPI: Added _OSI(Processor Aggregator Device)
[    0.443634] ACPI: Added _OSI(Linux-Dell-Video)
[    0.443635] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.443636] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.462393] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.465102] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.466168] ACPI: Dynamic OEM Table Load:
[    0.466175] ACPI: SSDT 0xFFFFA300163F9400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.468015] ACPI: Dynamic OEM Table Load:
[    0.468021] ACPI: SSDT 0xFFFFA3001624A800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.469918] ACPI: Dynamic OEM Table Load:
[    0.469923] ACPI: SSDT 0xFFFFA300163C7A00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.473151] ACPI: Interpreter enabled
[    0.473192] ACPI: (supports S0 S3 S4 S5)
[    0.473193] ACPI: Using IOAPIC for interrupt routing
[    0.473237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.473902] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.494651] ACPI: Power Resource [FN00] (off)
[    0.494781] ACPI: Power Resource [FN01] (off)
[    0.494911] ACPI: Power Resource [FN02] (off)
[    0.495034] ACPI: Power Resource [FN03] (off)
[    0.495157] ACPI: Power Resource [FN04] (off)
[    0.496592] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.496600] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.497609] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.498469] PCI host bridge to bus 0000:00
[    0.498472] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.498474] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.498476] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.498477] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.498478] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.498480] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.498481] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.498483] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.498484] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.498486] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.498487] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.498500] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.498694] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.498710] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.498718] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.498724] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.498895] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.498908] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[    0.499110] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.499132] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.499196] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.499348] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.499373] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1d000-0xf7e1d01f 64bit]
[    0.499447] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.499594] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.499615] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    0.499689] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.500218] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[    0.500305] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.500556] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[    0.500647] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.500882] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.500973] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.501215] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.501239] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[    0.501332] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.501491] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.501755] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.501773] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.501780] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.501787] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.501795] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.501802] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.501810] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[    0.501848] pci 0000:00:1f.2: PME# supported from D3hot
[    0.501995] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.502013] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[    0.502034] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.502269] acpiphp: Slot [1] registered
[    0.502275] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.502376] pci 0000:02:00.0: [10ec:8723] type 00 class 0x028000
[    0.502424] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.502471] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d03fff 64bit]
[    0.502659] pci 0000:02:00.0: supports D1 D2
[    0.502661] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.502875] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.502879] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.502882] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.503550] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.503581] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.503611] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[    0.503630] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.503740] pci 0000:03:00.0: supports D1 D2
[    0.503742] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.503911] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.503914] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.503917] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.503922] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.505771] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 10 *11 12 14 15)
[    0.505861] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 10 11 12 14 15) *0, disabled.
[    0.505950] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 10 *11 12 14 15)
[    0.506038] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 *10 11 12 14 15)
[    0.506124] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 10 11 12 14 15) *0, disabled.
[    0.506212] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 10 11 12 14 15) *0, disabled.
[    0.506300] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 10 11 12 14 15)
[    0.506387] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 *10 11 12 14 15)
[    0.507197] iommu: Default domain type: Translated 
[    0.507216] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.507216] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.507216] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.507216] vgaarb: loaded
[    0.507216] SCSI subsystem initialized
[    0.507216] libata version 3.00 loaded.
[    0.507216] ACPI: bus type USB registered
[    0.507216] usbcore: registered new interface driver usbfs
[    0.507216] usbcore: registered new interface driver hub
[    0.507216] usbcore: registered new device driver usb
[    0.507216] pps_core: LinuxPPS API ver. 1 registered
[    0.507216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.507216] PTP clock support registered
[    0.507216] EDAC MC: Ver: 3.0.0
[    0.507216] PCI: Using ACPI for IRQ routing
[    0.508310] PCI: pci_cache_line_size set to 64 bytes
[    0.508356] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.508358] e820: reserve RAM buffer [mem 0xcac1e000-0xcbffffff]
[    0.508359] e820: reserve RAM buffer [mem 0xcb486000-0xcbffffff]
[    0.508360] e820: reserve RAM buffer [mem 0xdb2c6000-0xdbffffff]
[    0.508362] e820: reserve RAM buffer [mem 0xdb4ab000-0xdbffffff]
[    0.508363] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.508493] NetLabel: Initializing
[    0.508494] NetLabel:  domain hash size = 128
[    0.508494] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.508511] NetLabel:  unlabeled traffic allowed by default
[    0.508517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.508517] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.511205] clocksource: Switched to clocksource tsc-early
[    0.526503] *** VALIDATE bpf ***
[    0.526625] VFS: Disk quotas dquot_6.6.0
[    0.526645] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.526677] *** VALIDATE ramfs ***
[    0.526681] *** VALIDATE hugetlbfs ***
[    0.526730] pnp: PnP ACPI init
[    0.526886] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.526894] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.527205] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.527208] system 00:01: [io  0xffff] has been reserved
[    0.527210] system 00:01: [io  0xffff] has been reserved
[    0.527211] system 00:01: [io  0xffff] has been reserved
[    0.527213] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.527215] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.527216] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.527218] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.527222] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.527223] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.527228] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.527259] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.527332] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.527337] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.527413] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.527960] system 00:05: [io  0x0a00-0x0a1f] has been reserved
[    0.527962] system 00:05: [io  0x0a20-0x0a2f] has been reserved
[    0.527967] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.528047] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.528052] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.528915] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved
[    0.528917] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
[    0.528919] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.528921] system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved
[    0.528923] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
[    0.528925] system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved
[    0.528927] system 00:07: [mem 0xfe111000-0xfe111007] has been reserved
[    0.528928] system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved
[    0.528934] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529518] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.529520] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.529522] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.529523] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.529525] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.529527] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.529529] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.529531] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.529533] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.529535] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.529537] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.529538] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.529543] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.530070] pnp: PnP ACPI: found 9 devices
[    0.536380] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.536428] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.536440] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.536443] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.536447] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.536455] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.536457] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.536461] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.536465] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.536472] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.536473] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.536475] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.536476] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.536478] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.536479] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.536481] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.536482] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.536484] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.536486] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.536488] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.536489] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.536491] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.536492] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.536494] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.536720] NET: Registered protocol family 2
[    0.536887] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.536947] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.537128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.537238] TCP: Hash tables configured (established 65536 bind 65536)
[    0.537299] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.537332] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.537432] NET: Registered protocol family 1
[    0.537439] NET: Registered protocol family 44
[    0.537452] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.558786] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x654 took 20513 usecs
[    0.558805] PCI: CLS 64 bytes, default 64
[    0.558861] Trying to unpack rootfs image as initramfs...
[    0.746946] Freeing initrd memory: 9224K
[    0.771995] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.771998] software IO TLB: mapped [mem 0xd72c6000-0xdb2c6000] (64MB)
[    0.772147] check: Scanning for low memory corruption every 60 seconds
[    0.772544] Initialise system trusted keyrings
[    0.772555] Key type blacklist registered
[    0.772616] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.774270] zbud: loaded
[    0.781725] Key type asymmetric registered
[    0.781727] Asymmetric key parser 'x509' registered
[    0.781737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.781794] io scheduler mq-deadline registered
[    0.781796] io scheduler kyber registered
[    0.781831] io scheduler bfq registered
[    0.782270] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[    0.782506] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
[    0.782738] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
[    0.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.782917] intel_idle: MWAIT substates: 0x11142120
[    0.782919] intel_idle: v0.4.1 model 0x45
[    0.783247] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.783363] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.784862] ACPI: Power Button [PWRB]
[    0.784921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.788680] ACPI: Power Button [PWRF]
[    0.789699] thermal LNXTHERM:00: registered as thermal_zone0
[    0.789701] ACPI: Thermal Zone [TZ00] (28 C)
[    0.790103] thermal LNXTHERM:01: registered as thermal_zone1
[    0.790105] ACPI: Thermal Zone [TZ01] (30 C)
[    0.790430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.791433] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.791435] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.792185] ahci 0000:00:1f.2: version 3.0
[    0.805376] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
[    0.805380] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.806195] scsi host0: ahci
[    0.806543] scsi host1: ahci
[    0.806686] scsi host2: ahci
[    0.806800] scsi host3: ahci
[    0.806850] ata1: DUMMY
[    0.806851] ata2: DUMMY
[    0.806852] ata3: DUMMY
[    0.806854] ata4: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a280 irq 45
[    0.806923] usbcore: registered new interface driver usbserial_generic
[    0.806930] usbserial: USB Serial support registered for generic
[    0.806952] rtc_cmos 00:02: RTC can wake from S4
[    0.807194] rtc_cmos 00:02: registered as rtc0
[    0.807212] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.807289] intel_pstate: Intel P-state driver initializing
[    0.807531] ledtrig-cpu: registered to indicate activity on CPUs
[    0.807713] drop_monitor: Initializing network drop monitor service
[    0.808150] NET: Registered protocol family 10
[    0.824899] Segment Routing with IPv6
[    0.824940] NET: Registered protocol family 17
[    0.825514] RAS: Correctable Errors collector initialized.
[    0.825597] microcode: sig=0x40651, pf=0x40, revision=0xa
[    0.825691] microcode: Microcode Update Driver: v2.2.
[    0.825697] IPI shorthand broadcast: enabled
[    0.825707] sched_clock: Marking stable (824120694, 1563898)->(829854290, -4169698)
[    0.825879] registered taskstats version 1
[    0.825890] Loading compiled-in X.509 certificates
[    0.831881] Loaded X.509 cert 'Build time autogenerated kernel key: 3173f57ffc4f79528759736b0e979de68a36535c'
[    0.831929] zswap: loaded using pool lzo/zbud
[    0.832169] Key type ._fscrypt registered
[    0.832171] Key type .fscrypt registered
[    0.832173] Key type fscrypt-provisioning registered
[    0.842081] Key type big_key registered
[    0.842980] PM:   Magic number: 4:386:870
[    0.843136] rtc_cmos 00:02: setting system clock to 2020-05-07T05:52:21 UTC (1588830741)
[    1.122053] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.122850] ata4.00: supports DRM functions and may not be fully accessible
[    1.123047] ata4.00: READ LOG DMA EXT failed, trying PIO
[    1.128838] ata4.00: disabling queued TRIM support
[    1.128844] ata4.00: ATA-9: Crucial_CT120M500SSD3, MU03, max UDMA/133
[    1.128848] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.142324] ata4.00: supports DRM functions and may not be fully accessible
[    1.148246] ata4.00: disabling queued TRIM support
[    1.161037] ata4.00: configured for UDMA/133
[    1.161048] ahci 0000:00:1f.2: port does not support device sleep
[    1.161441] scsi 3:0:0:0: Direct-Access     ATA      Crucial_CT120M50 MU03 PQ: 0 ANSI: 5
[    1.161843] ata4.00: Enabling discard_zeroes_data
[    1.162003] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.162007] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    1.162031] sd 3:0:0:0: [sda] Write Protect is off
[    1.162035] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.162066] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.162450] ata4.00: Enabling discard_zeroes_data
[    1.163303]  sda: sda1 sda2 sda3
[    1.164182] ata4.00: Enabling discard_zeroes_data
[    1.164559] sd 3:0:0:0: [sda] supports TCG Opal
[    1.164565] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.167067] Freeing unused decrypted memory: 2040K
[    1.167823] Freeing unused kernel image (initmem) memory: 1620K
[    1.183627] Write protecting the kernel read-only data: 20480k
[    1.185047] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.185871] Freeing unused kernel image (rodata/data gap) memory: 1640K
[    1.246990] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.246992] x86/mm: Checking user space page tables
[    1.299610] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.299612] Run /init as init process
[    1.299614]   with arguments:
[    1.299615]     /init
[    1.299615]   with environment:
[    1.299616]     HOME=/
[    1.299617]     TERM=linux
[    1.299618]     BOOT_IMAGE=../vmlinuz-linux
[    1.425288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.427535] ehci-pci: EHCI PCI platform driver
[    1.428000] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.428010] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.428026] ehci-pci 0000:00:1d.0: debug port 2
[    1.431940] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.431968] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[    1.444094] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.444154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    1.444156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.444158] usb usb1: Product: EHCI Host Controller
[    1.444160] usb usb1: Manufacturer: Linux 5.6.8-arch1-1 ehci_hcd
[    1.444161] usb usb1: SerialNumber: 0000:00:1d.0
[    1.444424] hub 1-0:1.0: USB hub found
[    1.444432] hub 1-0:1.0: 2 ports detected
[    1.444866] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.444876] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.445953] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    1.445960] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.446347] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    1.446351] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.446353] usb usb2: Product: xHCI Host Controller
[    1.446356] usb usb2: Manufacturer: Linux 5.6.8-arch1-1 xhci-hcd
[    1.446359] usb usb2: SerialNumber: 0000:00:14.0
[    1.446575] hub 2-0:1.0: USB hub found
[    1.446594] hub 2-0:1.0: 9 ports detected
[    1.449017] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.449024] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.449030] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.449102] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    1.449104] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.449105] usb usb3: Product: xHCI Host Controller
[    1.449107] usb usb3: Manufacturer: Linux 5.6.8-arch1-1 xhci-hcd
[    1.449108] usb usb3: SerialNumber: 0000:00:14.0
[    1.449712] hub 3-0:1.0: USB hub found
[    1.449765] hub 3-0:1.0: 4 ports detected
[    1.566758] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.603011] random: fast init done
[    1.749369] systemd[1]: systemd 245.5-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.763699] systemd[1]: Detected architecture x86-64.
[    1.773594] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.780239] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[    1.786939] tsc: Refined TSC clocksource calibration: 1696.073 MHz
[    1.786954] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[    1.786998] clocksource: Switched to clocksource tsc
[    1.816066] systemd[1]: Set hostname to <Chon1404>.
[    1.920434] usb 2-4: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01
[    1.920440] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.920721] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    1.920726] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.921136] hub 1-1:1.0: USB hub found
[    1.921255] hub 2-4:1.0: USB hub found
[    1.921285] hub 2-4:1.0: 4 ports detected
[    1.921356] hub 1-1:1.0: 8 ports detected
[    2.007030] systemd[1]: Created slice system-getty.slice.
[    2.007347] systemd[1]: Created slice system-modprobe.slice.
[    2.007618] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.007974] systemd[1]: Created slice User and Session Slice.
[    2.008050] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.008102] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.008302] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.008338] systemd[1]: Reached target Local Encrypted Volumes.
[    2.008369] systemd[1]: Reached target Remote File Systems.
[    2.008379] systemd[1]: Reached target Slices.
[    2.008473] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.008589] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.008893] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.011114] systemd[1]: Listening on Process Core Dump Socket.
[    2.011180] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.011354] systemd[1]: Listening on Journal Audit Socket.
[    2.011463] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.011575] systemd[1]: Listening on Journal Socket.
[    2.011681] systemd[1]: Listening on udev Control Socket.
[    2.011752] systemd[1]: Listening on udev Kernel Socket.
[    2.012778] systemd[1]: Mounting Huge Pages File System...
[    2.013985] systemd[1]: Mounting POSIX Message Queue File System...
[    2.015568] systemd[1]: Mounting Kernel Debug File System...
[    2.017114] systemd[1]: Mounting Kernel Trace File System...
[    2.018818] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.020506] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    2.022177] systemd[1]: Starting Load Kernel Module drm...
[    2.024532] systemd[1]: Starting Set Up Additional Binary Formats...
[    2.024619] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.026913] systemd[1]: Starting Journal Service...
[    2.028148] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    2.028378] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    2.030128] systemd[1]: Mounting Kernel Configuration File System...
[    2.031754] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.033363] systemd[1]: Starting Apply Kernel Variables...
[    2.035040] systemd[1]: Starting udev Coldplug all Devices...
[    2.035326] Linux agpgart interface v0.103
[    2.037484] systemd[1]: Mounted Huge Pages File System.
[    2.037749] systemd[1]: Mounted POSIX Message Queue File System.
[    2.038001] systemd[1]: Mounted Kernel Debug File System.
[    2.038248] systemd[1]: Mounted Kernel Trace File System.
[    2.039214] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.039530] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 263 (systemd-binfmt)
[    2.041151] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    2.043271] random: lvm: uninitialized urandom read (4 bytes read)
[    2.046842] usb 2-7: new full-speed USB device number 3 using xhci_hcd
[    2.050680] EXT4-fs (sda1): re-mounted. Opts: (null)
[    2.058609] systemd[1]: Mounted Kernel Configuration File System.
[    2.059237] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.059462] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    2.065148] systemd[1]: Started LVM2 metadata daemon.
[    2.065320] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    2.067255] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.068813] systemd[1]: Starting Load/Save Random Seed...
[    2.068879] systemd[1]: Condition check resulted in Create System Users being skipped.
[    2.070379] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.071530] systemd[1]: Finished Set Up Additional Binary Formats.
[    2.077789] systemd[1]: Finished Apply Kernel Variables.
[    2.107427] systemd[1]: modprobe@drm.service: Succeeded.
[    2.107859] systemd[1]: Finished Load Kernel Module drm.
[    2.119657] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.121011] systemd[1]: Starting udev Kernel Device Manager...
[    2.175291] systemd[1]: Finished udev Coldplug all Devices.
[    2.191224] usb 2-7: New USB device found, idVendor=13d3, idProduct=3394, bcdDevice= 2.00
[    2.191227] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.191229] usb 2-7: Product: RT Bluetooth Radio
[    2.191230] usb 2-7: Manufacturer: Realtek
[    2.191232] usb 2-7: SerialNumber: 00e04c000001
[    2.263496] usb 2-4.1: new low-speed USB device number 4 using xhci_hcd
[    2.359075] usb 2-4.1: New USB device found, idVendor=046d, idProduct=c063, bcdDevice=57.00
[    2.359079] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.359081] usb 2-4.1: Product: DELL USB Laser Mouse
[    2.359084] usb 2-4.1: Manufacturer: DELL
[    2.450164] usb 2-4.2: new low-speed USB device number 5 using xhci_hcd
[    2.545252] usb 2-4.2: New USB device found, idVendor=0e8f, idProduct=0022, bcdDevice= 2.10
[    2.545257] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.545260] usb 2-4.2: Product: USB KB V11
[    2.545263] usb 2-4.2: Manufacturer: GASIA
[    2.562226] systemd[1]: Started Journal Service.
[    2.562359] audit: type=1130 audit(1588830743.213:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.572292] systemd-journald[264]: Received client request to flush runtime journal.
[    2.700944] audit: type=1130 audit(1588830743.353:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.725858] audit: type=1130 audit(1588830743.377:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.961199] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.961242] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.978450] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    2.978453] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.978455] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.978456] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.978458] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.020192] Adding 8499196k swap on /dev/sda2.  Priority:-2 extents:1 across:8499196k SSFS
[    3.036005] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    3.089171] cryptd: max_cpu_qlen set to 1000
[    3.132944] audit: type=1130 audit(1588830743.783:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.161152] libphy: r8169: probed
[    3.161467] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 74:d4:35:60:cb:75, XID 4c0, IRQ 48
[    3.161471] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.184132] AVX2 version of gcm_enc/dec engaged.
[    3.184135] AES CTR mode by8 optimization enabled
[    3.189691] audit: type=1130 audit(1588830743.840:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-57b140b9\x2de7ed\x2d42d6\x2da03b\x2ddba4ff5d4e3a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.215365] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.217128] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.231179] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.232030] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.232034] cfg80211: failed to load regulatory.db
[    3.266442] audit: type=1130 audit(1588830743.917:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.280072] audit: type=1127 audit(1588830743.930:8): pid=350 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    3.288393] audit: type=1130 audit(1588830743.940:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.297139] iTCO_vendor_support: vendor-support=0
[    3.351064] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.351124] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    3.355871] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.392756] hid: raw HID events driver (C) Jiri Kosina
[    3.402294] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    3.486850] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
[    3.533725] usbcore: registered new interface driver usbhid
[    3.533727] usbhid: USB HID core driver
[    3.548993] Creating 1 MTD partitions on "intel-spi":
[    3.548998] 0x000000000000-0x000000800000 : "BIOS"
[    3.623917] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:hp
[    3.623922] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.623926] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.623928] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    3.623931] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    3.623933] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    3.629289] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input3
[    3.629405] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[    3.639500] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.0/0003:046D:C063.0001/input/input5
[    3.676876] hid-generic 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:14.0-4.1/input0
[    3.677177] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.0/0003:0E8F:0022.0002/input/input6
[    3.736987] hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:00:14.0-4.2/input0
[    3.737333] input: GASIA USB KB V11 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.1/0003:0E8F:0022.0003/input/input7
[    3.797009] input: GASIA USB KB V11 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.1/0003:0E8F:0022.0003/input/input8
[    3.797118] hid-generic 0003:0E8F:0022.0003: input,hidraw2: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:00:14.0-4.2/input1
[    4.067322] mousedev: PS/2 mouse device common for all mice
[    4.089756] Bluetooth: Core ver 2.22
[    4.089781] NET: Registered protocol family 31
[    4.089783] Bluetooth: HCI device and connection manager initialized
[    4.089788] Bluetooth: HCI socket layer initialized
[    4.089792] Bluetooth: L2CAP socket layer initialized
[    4.089797] Bluetooth: SCO socket layer initialized
[    4.117572] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.118842] Console: switching to colour dummy device 80x25
[    4.122065] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.122067] [drm] Driver supports precise vblank timestamp query.
[    4.122837] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.142933] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[    4.146529] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.148240] acpi device:65: registered as cooling_device9
[    4.148412] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    4.148668] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.181309] audit: type=1130 audit(1588830744.833:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.196236] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    4.196700] random: avahi-daemon: uninitialized urandom read (4 bytes read)
[    4.231358] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    4.253649] fbcon: i915drmfb (fb0) is primary device
[    4.260172] random: crng init done
[    4.280990] usbcore: registered new interface driver btusb
[    4.295032] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[    4.295036] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723a_fw.bin
[    4.306988] Console: switching to colour frame buffer device 160x64
[    4.329625] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    4.396226] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[    4.396341] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    4.396439] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    4.396536] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    4.396633] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    4.471213] intel_rapl_common: Found RAPL domain package
[    4.471216] intel_rapl_common: Found RAPL domain core
[    4.471218] intel_rapl_common: Found RAPL domain uncore
[    4.471220] intel_rapl_common: Found RAPL domain dram
[    4.471224] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    4.471232] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[    4.503376] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[    4.507073] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    4.508519] rtlwifi: rtlwifi: wireless switch is on
[    4.521042] rtl8723ae 0000:02:00.0 wlp2s0: renamed from wlan0
[    4.970783] Bluetooth: hci0: RTL: fw version 0x0e3da5b1
[    5.070067] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    5.191324] r8169 0000:03:00.0 enp3s0: Link is Down
[    8.104423] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[    8.104450] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    9.158100] kauditd_printk_skb: 16 callbacks suppressed
[    9.158104] audit: type=1130 audit(1588830749.807:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.282473] audit: type=1130 audit(1588830749.933:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.416494] audit: type=1130 audit(1588830750.067:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.525358] audit: type=1131 audit(1588830750.177:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.011409] audit: type=1131 audit(1588830755.663:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.666933] audit: type=1100 audit(1588830759.320:32): pid=424 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="chon" exe="/usr/bin/login" hostname=Chon1404 addr=? terminal=tty1 res=success'
[   18.677316] audit: type=1101 audit(1588830759.330:33): pid=424 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="chon" exe="/usr/bin/login" hostname=Chon1404 addr=? terminal=tty1 res=success'
[   18.681179] audit: type=1103 audit(1588830759.333:34): pid=424 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="chon" exe="/usr/bin/login" hostname=Chon1404 addr=? terminal=tty1 res=success'
[   18.681448] audit: type=1006 audit(1588830759.333:35): pid=424 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   18.717608] audit: type=1130 audit(1588830759.370:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.726757] audit: type=1101 audit(1588830759.377:37): pid=458 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="chon" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.726849] audit: type=1103 audit(1588830759.377:38): pid=458 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="chon" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   18.726940] audit: type=1006 audit(1588830759.380:39): pid=458 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   18.728363] audit: type=1105 audit(1588830759.380:40): pid=458 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="chon" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.836149] process '/usr/bin/rslsync' started with executable stack
[   20.303114] fuse: init (API version 7.31)
[   20.303155] *** VALIDATE fuseblk ***
[   20.303160] *** VALIDATE fuse ***
[   20.493399] kauditd_printk_skb: 5 callbacks suppressed
[   20.493402] audit: type=1130 audit(1588830761.143:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.012918] audit: type=1334 audit(1588830763.663:47): prog-id=12 op=LOAD
[   23.013160] audit: type=1334 audit(1588830763.663:48): prog-id=13 op=LOAD
[   23.061444] audit: type=1130 audit(1588830763.713:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.082559] audit: type=1130 audit(1588830764.733:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.150556] audit: type=1130 audit(1588830764.803:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.252135] audit: type=1105 audit(1588830764.903:52): pid=888 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
[   35.026046] audit: type=1131 audit(1588830775.677:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.093584] audit: type=1334 audit(1588830775.747:54): prog-id=10 op=UNLOAD
[   35.093596] audit: type=1334 audit(1588830775.747:55): prog-id=9 op=UNLOAD
[chon@Chon1404 ~]$ 
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

benjarobin a écrit :
mer. 06 mai 2020, 16:59
Si tu fermes ta session, après l'avoir ré-ouverte dans la foulé, as tu ce même délai lors de l'ouverture de l'explorateur de fichiers
J'ai honte... :oops:
Tu peux me redonner les commandes pour fermer et ré-ouvrir la session proprement sans reboot ? Je ne suis pas sûr de faire ce qu'il faut. :mrgreen:
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
benjarobin
Maître du Kyudo
Messages : 16017
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Ouverture de dossiers] Temps d'ouverture

Message par benjarobin »

En ligne de commande : xfce4-session-logout --logout
Sinon il y sûrement un bouton dans l'interface graphique, mais je ne connais pas vraiment XFCE...
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

benjarobin a écrit :
jeu. 07 mai 2020, 09:44
En ligne de commande : xfce4-session-logout --logout
Sinon il y sûrement un bouton dans l'interface graphique, mais je ne connais pas vraiment XFCE...
Oui, il y a bien un bouton "Déconnexion" qui amène au même résultat.
xfce4-session-logout --logout m'a ramené à un terminal pleine page toujours sous [chon@Chon1404 ~]$
Ensuite, j'ai simplement tapé startx et suis revenu à mon bureau.
Avec cette séquence, l'ouverture d'un dossier sur le bureau est instantanée comme avant la manip.
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
benjarobin
Maître du Kyudo
Messages : 16017
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Ouverture de dossiers] Temps d'ouverture

Message par benjarobin »

Tu n'aurais pas un vieux disque dur ? Tu n'as pas de SSD ? Si tu n'as pas de SSD tu as juste un disque dur un peu lent...
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)
lemust83
archer de cavalerie
Messages : 190
Inscription : ven. 11 déc. 2015, 21:20
Contact :

Re: [Ouverture de dossiers] Temps d'ouverture

Message par lemust83 »

Bonjour.
Un truc simple pour le savoir:

Code : Tout sélectionner

cat /sys/block/sda/queue/rotational
  • Si ="1" c'est un disque à plateaux.
  • Si="0" c'est un ssd
Tour: Arch (Xfce) 64 Testing: 6-Core: AMD Ryzen 5 2600X type: MT MCP speed: 2152 MHz min/max: 2200/3600 MH
UEFI: American Megatrends v: 3803 date: 01/22/2018
Graphics:
Device-1: AMD Baffin [Radeon RX 460/560D / Pro
450/455/460/555/555X/560/560X]
driver: amdgpu v: kernel
Display: server: X.Org 1.20.8 driver: amdgpu,ati unloaded: modesetting
resolution: 1920x1080~60Hz
OpenGL: renderer: Radeon RX 560 Series
Manjaro en Dual (grub).
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Merci à tous les deux.
benjarobin a écrit :
jeu. 07 mai 2020, 16:18
Tu n'aurais pas un vieux disque dur ? Tu n'as pas de SSD ? Si tu n'as pas de SSD tu as juste un disque dur un peu lent.
C'est un SSD de 120 Go. C'est écrit dans ma signature. :mrgreen:

Ce que confirme la commande donnée par Lemust83 :

Code : Tout sélectionner

[chon@Chon1404 ~]$ cat /sys/block/sda/queue/rotational
0
[chon@Chon1404 ~]$ 
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
Avatar de l’utilisateur
CoudUr
yeomen
Messages : 217
Inscription : sam. 06 avr. 2013, 17:12

Re: [Ouverture de dossiers] Temps d'ouverture

Message par CoudUr »

Chon a écrit :
jeu. 07 mai 2020, 08:01
Bonjour et merci pour les réponses.
CoudUr a écrit :
mer. 06 mai 2020, 16:56
Dans une console tu lances thunar , et dans une autre tu lis les messages de journactl et dmesg, il y aura sûrement une erreur visible quelque part avec un peu de chance.

Code : Tout sélectionner

[chon@Chon1404 ~]$ journalctl
-- Logs begin at Sat 2018-08-11 12:00:04 CEST, end at Thu 2020-05-07 07:55:49 C>
août 11 12:00:04 Chon1404 kernel: Linux version 4.17.13-arch1-1-ARCH (builduser>
août 11 12:00:04 Chon1404 kernel: Command line: BOOT_IMAGE=../vmlinuz-linux roo>
août 11 12:00:04 Chon1404 kernel: KERNEL supported cpus:
août 11 12:00:04 Chon1404 kernel:   Intel GenuineIntel
août 11 12:00:04 Chon1404 kernel:   AMD AuthenticAMD
août 11 12:00:04 Chon1404 kernel:   Centaur CentaurHauls
août 11 12:00:04 Chon1404 kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87>
août 11 12:00:04 Chon1404 kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE>
août 11 12:00:04 Chon1404 kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX>
août 11 12:00:04 Chon1404 kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes>
août 11 12:00:04 Chon1404 kernel: x86/fpu: Enabled xstate features 0x7, context>
août 11 12:00:04 Chon1404 kernel: e820: BIOS-provided physical RAM map:
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x0000000000000000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x000000000009d800-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cac1e000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cac25000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cb486000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000cb701000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000db2c6000-0x00000000>
août 11 12:00:04 Chon1404 kernel: BIOS-e820: [mem 0x00000000db34e000-0x00000000>
lines 1-23
1) Il manque la console pour le lancement de thunar.
2) Ton log de journactl est daté du mois d'août ...
3) Pour espérer voir quelque chose (et encore ce n'est pas sûr) il faut faire les choses dans l'ordre, sinon tu ne verras rien.

Code : Tout sélectionner

$ journalctl -f

Code : Tout sélectionner

$ dmesg -Tw 

Code : Tout sélectionner

$ thunar
Première parenthèse fermée deuxième ouverte, il existe un démon pour thunar ainsi il s'ouvre plus vite passé la première ouverture, un peu comme pour urxvt . Tu peux chercher aussi de ce côté là en seconde option mais ça ne résoudra pas ton problème des 10s qui à mon avis doit être régler en premier surtout avec un SSD.
https://wiki.archlinux.org/index.php/Th ... aemon_mode

Je sais que tu as déjà essayé avec ton fichier "/etc/fstab" modifié mais si j'étais toi j'essayerai aussi en coupant le réseau pour être sûr que rien ne transite, ça ne mange pas de pain, bref il faut tenter plusieurs choses quoi.
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Bonjour et merci pour ton aide CoudUr.
CoudUr a écrit :
ven. 08 mai 2020, 17:04
1) Il manque la console pour le lancement de thunar.
2) Ton log de journactl est daté du mois d'août ...
3) Pour espérer voir quelque chose (et encore ce n'est pas sûr) il faut faire les choses dans l'ordre, sinon tu ne verras rien.

Code : Tout sélectionner

$ journalctl -f

Code : Tout sélectionner

$ dmesg -Tw 

Code : Tout sélectionner

$ thunar
1) Effectivement, je n'avais pas mis le résultat de la commande thunar, tout simplement parce que lancée dans un tty depuis le bureau du PC, elle ne m'avait fait qu'ouvrir mon dossier home sans aucune autre information. Je n'avais donc pas jugé utile d'encombrer ma réponse avec un résultat qui me paraissait sans importance.

2) Oui, le log débute le 11/08/18 mais avec la commande journalctl -f, il se limite visiblement à ce qui a été fait depuis le dernier boot. On peut d'ailleurs voir que j'ai stoppé rslsync parce que sinon, le log n'arrête pas de se remplir. Le log :

Code : Tout sélectionner

[chon@Chon1404 ~]$ journalctl -f
-- Logs begin at Sat 2018-08-11 12:00:04 CEST. --
mai 09 08:58:10 Chon1404 rslsync[470]: [20200509 08:58:10.094] Network_ReleaseSockets: all sockets have been released
mai 09 08:58:10 Chon1404 rslsync[470]: [20200509 08:58:10.094] WORKER[0x000055acfa881e60]: thread stop
mai 09 08:58:10 Chon1404 rslsync[470]: [20200509 08:58:10.094] WORKER[0x000055acfa881e60]: deleted
mai 09 08:58:10 Chon1404 rslsync[470]: [20200509 08:58:10.095] Shutdown. Saving config sync.dat
mai 09 08:58:10 Chon1404 rslsync[470]: By using this application, you agree to our Privacy Policy, Terms of Use and End User License Agreement.
mai 09 08:58:10 Chon1404 rslsync[470]: https://www.resilio.com/legal/privacy
mai 09 08:58:10 Chon1404 rslsync[470]: https://www.resilio.com/legal/terms-of-use
mai 09 08:58:10 Chon1404 rslsync[470]: https://www.resilio.com/legal/eula
mai 09 08:58:10 Chon1404 systemd[463]: rslsync.service: Succeeded.
mai 09 08:58:10 Chon1404 systemd[463]: Stopped Resilio Sync per-user service.
mai 09 09:02:34 Chon1404 rtkit-daemon[846]: Supervising 4 threads of 2 processes of 1 users.
mai 09 09:02:34 Chon1404 rtkit-daemon[846]: Supervising 4 threads of 2 processes of 1 users.
mai 09 09:10:24 Chon1404 systemd[1]: Starting Cleanup of Temporary Directories...
mai 09 09:10:24 Chon1404 systemd[1]: systemd-tmpfiles-clean.service: Succeeded.
mai 09 09:10:24 Chon1404 systemd[1]: Finished Cleanup of Temporary Directories.
mai 09 09:10:24 Chon1404 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
mai 09 09:10:24 Chon1404 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
mai 09 09:10:24 Chon1404 kernel: audit: type=1130 audit(1589008224.914:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
mai 09 09:10:24 Chon1404 kernel: audit: type=1131 audit(1589008224.914:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
Avatar de l’utilisateur
Chon
Daikyu
Messages : 67
Inscription : jeu. 15 févr. 2018, 09:31

Re: [Ouverture de dossiers] Temps d'ouverture

Message par Chon »

Obligé de scinder la réponse parce que trop de caractères...

3) Ensuite, la commande dmesg -Tw donne :

Code : Tout sélectionner

c24fff] (28672 bytes)
[sam. mai  9 08:54:45 2020] PM: Registering ACPI NVS region [mem 0xdb4ab000-0xdb9dafff] (5439488 bytes)
[sam. mai  9 08:54:45 2020] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[sam. mai  9 08:54:45 2020] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[sam. mai  9 08:54:45 2020] pinctrl core: initialized pinctrl subsystem
[sam. mai  9 08:54:45 2020] PM: RTC time: 06:54:46, date: 2020-05-09
[sam. mai  9 08:54:45 2020] thermal_sys: Registered thermal governor 'fair_share'
[sam. mai  9 08:54:45 2020] thermal_sys: Registered thermal governor 'bang_bang'
[sam. mai  9 08:54:45 2020] thermal_sys: Registered thermal governor 'step_wise'
[sam. mai  9 08:54:45 2020] thermal_sys: Registered thermal governor 'user_space'
[sam. mai  9 08:54:45 2020] thermal_sys: Registered thermal governor 'power_allocator'
[sam. mai  9 08:54:45 2020] NET: Registered protocol family 16
[sam. mai  9 08:54:45 2020] audit: initializing netlink subsys (disabled)
[sam. mai  9 08:54:45 2020] audit: type=2000 audit(1589007286.303:1): state=initialized audit_enabled=0 res=1
[sam. mai  9 08:54:45 2020] cpuidle: using governor ladder
[sam. mai  9 08:54:45 2020] cpuidle: using governor menu
[sam. mai  9 08:54:45 2020] ACPI: bus type PCI registered
[sam. mai  9 08:54:45 2020] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[sam. mai  9 08:54:45 2020] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[sam. mai  9 08:54:45 2020] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[sam. mai  9 08:54:45 2020] PCI: Using configuration type 1 for base access
[sam. mai  9 08:54:45 2020] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[sam. mai  9 08:54:45 2020] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[sam. mai  9 08:54:45 2020] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[sam. mai  9 08:54:45 2020] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[sam. mai  9 08:54:45 2020] ACPI: Added _OSI(Module Device)
[sam. mai  9 08:54:45 2020] ACPI: Added _OSI(Processor Device)
[sam. mai  9 08:54:45 2020] ACPI: Added _OSI(3.0 _SCP Extensions)
[sam. mai  9 08:54:45 2020] ACPI: Added _OSI(Processor Aggregator Device)
[sam. mai  9 08:54:45 2020] ACPI: Added _OSI(Linux-Dell-Video)
[sam. mai  9 08:54:45 2020] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[sam. mai  9 08:54:45 2020] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[sam. mai  9 08:54:45 2020] ACPI: 7 ACPI AML tables successfully acquired and loaded
[sam. mai  9 08:54:45 2020] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[sam. mai  9 08:54:45 2020] ACPI: Dynamic OEM Table Load:
[sam. mai  9 08:54:45 2020] ACPI: SSDT 0xFFFF891D163FB400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[sam. mai  9 08:54:45 2020] ACPI: Dynamic OEM Table Load:
[sam. mai  9 08:54:45 2020] ACPI: SSDT 0xFFFF891D1624A000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[sam. mai  9 08:54:45 2020] ACPI: Dynamic OEM Table Load:
[sam. mai  9 08:54:45 2020] ACPI: SSDT 0xFFFF891D163C7E00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[sam. mai  9 08:54:45 2020] ACPI: Interpreter enabled
[sam. mai  9 08:54:45 2020] ACPI: (supports S0 S3 S4 S5)
[sam. mai  9 08:54:45 2020] ACPI: Using IOAPIC for interrupt routing
[sam. mai  9 08:54:45 2020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[sam. mai  9 08:54:45 2020] ACPI: Enabled 9 GPEs in block 00 to 7F
[sam. mai  9 08:54:45 2020] ACPI: Power Resource [FN00] (off)
[sam. mai  9 08:54:45 2020] ACPI: Power Resource [FN01] (off)
[sam. mai  9 08:54:45 2020] ACPI: Power Resource [FN02] (off)
[sam. mai  9 08:54:45 2020] ACPI: Power Resource [FN03] (off)
[sam. mai  9 08:54:45 2020] ACPI: Power Resource [FN04] (off)
[sam. mai  9 08:54:45 2020] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[sam. mai  9 08:54:45 2020] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[sam. mai  9 08:54:45 2020] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[sam. mai  9 08:54:45 2020] PCI host bridge to bus 0000:00
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: root bus resource [bus 00-3e]
[sam. mai  9 08:54:45 2020] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[sam. mai  9 08:54:45 2020] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[sam. mai  9 08:54:45 2020] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[sam. mai  9 08:54:45 2020] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:00:14.0: PME# supported from D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[sam. mai  9 08:54:45 2020] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1d000-0xf7e1d01f 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[sam. mai  9 08:54:45 2020] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[sam. mai  9 08:54:45 2020] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.2: PME# supported from D3hot
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[sam. mai  9 08:54:45 2020] acpiphp: Slot [1] registered
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.0: PCI bridge to [bus 01]
[sam. mai  9 08:54:45 2020] pci 0000:02:00.0: [10ec:8723] type 00 class 0x028000
[sam. mai  9 08:54:45 2020] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[sam. mai  9 08:54:45 2020] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d03fff 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:02:00.0: supports D1 D2
[sam. mai  9 08:54:45 2020] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2: PCI bridge to [bus 02]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[sam. mai  9 08:54:45 2020] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[sam. mai  9 08:54:45 2020] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[sam. mai  9 08:54:45 2020] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[sam. mai  9 08:54:45 2020] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[sam. mai  9 08:54:45 2020] pci 0000:03:00.0: supports D1 D2
[sam. mai  9 08:54:45 2020] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3: PCI bridge to [bus 03]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 10 *11 12 14 15)
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 10 11 12 14 15) *0, disabled.
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 10 *11 12 14 15)
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 *10 11 12 14 15)
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 10 11 12 14 15) *0, disabled.
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 10 11 12 14 15) *0, disabled.
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 10 11 12 14 15)
[sam. mai  9 08:54:45 2020] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 *10 11 12 14 15)
[sam. mai  9 08:54:45 2020] iommu: Default domain type: Translated 
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: vgaarb: bridge control possible
[sam. mai  9 08:54:45 2020] vgaarb: loaded
[sam. mai  9 08:54:45 2020] SCSI subsystem initialized
[sam. mai  9 08:54:45 2020] libata version 3.00 loaded.
[sam. mai  9 08:54:45 2020] ACPI: bus type USB registered
[sam. mai  9 08:54:45 2020] usbcore: registered new interface driver usbfs
[sam. mai  9 08:54:45 2020] usbcore: registered new interface driver hub
[sam. mai  9 08:54:45 2020] usbcore: registered new device driver usb
[sam. mai  9 08:54:45 2020] pps_core: LinuxPPS API ver. 1 registered
[sam. mai  9 08:54:45 2020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[sam. mai  9 08:54:45 2020] PTP clock support registered
[sam. mai  9 08:54:45 2020] EDAC MC: Ver: 3.0.0
[sam. mai  9 08:54:45 2020] PCI: Using ACPI for IRQ routing
[sam. mai  9 08:54:45 2020] PCI: pci_cache_line_size set to 64 bytes
[sam. mai  9 08:54:45 2020] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[sam. mai  9 08:54:45 2020] e820: reserve RAM buffer [mem 0xcac1e000-0xcbffffff]
[sam. mai  9 08:54:45 2020] e820: reserve RAM buffer [mem 0xcb486000-0xcbffffff]
[sam. mai  9 08:54:45 2020] e820: reserve RAM buffer [mem 0xdb2c6000-0xdbffffff]
[sam. mai  9 08:54:45 2020] e820: reserve RAM buffer [mem 0xdb4ab000-0xdbffffff]
[sam. mai  9 08:54:45 2020] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[sam. mai  9 08:54:45 2020] NetLabel: Initializing
[sam. mai  9 08:54:45 2020] NetLabel:  domain hash size = 128
[sam. mai  9 08:54:45 2020] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[sam. mai  9 08:54:45 2020] NetLabel:  unlabeled traffic allowed by default
[sam. mai  9 08:54:45 2020] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[sam. mai  9 08:54:45 2020] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[sam. mai  9 08:54:45 2020] clocksource: Switched to clocksource tsc-early
[sam. mai  9 08:54:45 2020] *** VALIDATE bpf ***
[sam. mai  9 08:54:45 2020] VFS: Disk quotas dquot_6.6.0
[sam. mai  9 08:54:45 2020] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[sam. mai  9 08:54:45 2020] *** VALIDATE ramfs ***
[sam. mai  9 08:54:45 2020] *** VALIDATE hugetlbfs ***
[sam. mai  9 08:54:45 2020] pnp: PnP ACPI init
[sam. mai  9 08:54:45 2020] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[sam. mai  9 08:54:45 2020] system 00:01: [io  0x0680-0x069f] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0xffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0xffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0xffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0x1e00-0x1efe] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0x1800-0x18fe] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: [io  0x164e-0x164f] has been reserved
[sam. mai  9 08:54:45 2020] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[sam. mai  9 08:54:45 2020] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[sam. mai  9 08:54:45 2020] system 00:03: [io  0x1854-0x1857] has been reserved
[sam. mai  9 08:54:45 2020] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[sam. mai  9 08:54:45 2020] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[sam. mai  9 08:54:45 2020] system 00:05: [io  0x0a00-0x0a1f] has been reserved
[sam. mai  9 08:54:45 2020] system 00:05: [io  0x0a20-0x0a2f] has been reserved
[sam. mai  9 08:54:45 2020] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[sam. mai  9 08:54:45 2020] system 00:06: [io  0x04d0-0x04d1] has been reserved
[sam. mai  9 08:54:45 2020] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe111000-0xfe111007] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[sam. mai  9 08:54:45 2020] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[sam. mai  9 08:54:45 2020] pnp: PnP ACPI: found 9 devices
[sam. mai  9 08:54:45 2020] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.0: PCI bridge to [bus 01]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2: PCI bridge to [bus 02]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3: PCI bridge to [bus 03]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[sam. mai  9 08:54:45 2020] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[sam. mai  9 08:54:45 2020] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[sam. mai  9 08:54:45 2020] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[sam. mai  9 08:54:45 2020] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[sam. mai  9 08:54:45 2020] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[sam. mai  9 08:54:45 2020] NET: Registered protocol family 2
[sam. mai  9 08:54:45 2020] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[sam. mai  9 08:54:45 2020] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[sam. mai  9 08:54:45 2020] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[sam. mai  9 08:54:45 2020] TCP: Hash tables configured (established 65536 bind 65536)
[sam. mai  9 08:54:45 2020] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[sam. mai  9 08:54:45 2020] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[sam. mai  9 08:54:45 2020] NET: Registered protocol family 1
[sam. mai  9 08:54:45 2020] NET: Registered protocol family 44
[sam. mai  9 08:54:45 2020] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[sam. mai  9 08:54:45 2020] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x654 took 20454 usecs
[sam. mai  9 08:54:45 2020] PCI: CLS 64 bytes, default 64
[sam. mai  9 08:54:45 2020] Trying to unpack rootfs image as initramfs...
[sam. mai  9 08:54:45 2020] Freeing initrd memory: 9224K
[sam. mai  9 08:54:45 2020] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[sam. mai  9 08:54:45 2020] software IO TLB: mapped [mem 0xd72c6000-0xdb2c6000] (64MB)
[sam. mai  9 08:54:45 2020] check: Scanning for low memory corruption every 60 seconds
[sam. mai  9 08:54:45 2020] Initialise system trusted keyrings
[sam. mai  9 08:54:45 2020] Key type blacklist registered
[sam. mai  9 08:54:45 2020] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[sam. mai  9 08:54:45 2020] zbud: loaded
[sam. mai  9 08:54:45 2020] Key type asymmetric registered
[sam. mai  9 08:54:45 2020] Asymmetric key parser 'x509' registered
[sam. mai  9 08:54:45 2020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[sam. mai  9 08:54:45 2020] io scheduler mq-deadline registered
[sam. mai  9 08:54:45 2020] io scheduler kyber registered
[sam. mai  9 08:54:45 2020] io scheduler bfq registered
[sam. mai  9 08:54:45 2020] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[sam. mai  9 08:54:45 2020] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
[sam. mai  9 08:54:45 2020] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
[sam. mai  9 08:54:45 2020] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[sam. mai  9 08:54:45 2020] intel_idle: MWAIT substates: 0x11142120
[sam. mai  9 08:54:45 2020] intel_idle: v0.4.1 model 0x45
[sam. mai  9 08:54:45 2020] intel_idle: lapic_timer_reliable_states 0xffffffff
[sam. mai  9 08:54:45 2020] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[sam. mai  9 08:54:45 2020] ACPI: Power Button [PWRB]
[sam. mai  9 08:54:45 2020] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[sam. mai  9 08:54:45 2020] ACPI: Power Button [PWRF]
[sam. mai  9 08:54:45 2020] thermal LNXTHERM:00: registered as thermal_zone0
[sam. mai  9 08:54:45 2020] ACPI: Thermal Zone [TZ00] (28 C)
[sam. mai  9 08:54:45 2020] thermal LNXTHERM:01: registered as thermal_zone1
[sam. mai  9 08:54:45 2020] ACPI: Thermal Zone [TZ01] (30 C)
[sam. mai  9 08:54:45 2020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[sam. mai  9 08:54:45 2020] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[sam. mai  9 08:54:45 2020] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[sam. mai  9 08:54:45 2020] ahci 0000:00:1f.2: version 3.0
[sam. mai  9 08:54:45 2020] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
[sam. mai  9 08:54:45 2020] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[sam. mai  9 08:54:45 2020] scsi host0: ahci
[sam. mai  9 08:54:45 2020] scsi host1: ahci
[sam. mai  9 08:54:45 2020] scsi host2: ahci
[sam. mai  9 08:54:45 2020] scsi host3: ahci
[sam. mai  9 08:54:45 2020] ata1: DUMMY
[sam. mai  9 08:54:45 2020] ata2: DUMMY
[sam. mai  9 08:54:45 2020] ata3: DUMMY
[sam. mai  9 08:54:45 2020] ata4: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a280 irq 45
[sam. mai  9 08:54:45 2020] usbcore: registered new interface driver usbserial_generic
[sam. mai  9 08:54:45 2020] usbserial: USB Serial support registered for generic
[sam. mai  9 08:54:45 2020] rtc_cmos 00:02: RTC can wake from S4
[sam. mai  9 08:54:45 2020] rtc_cmos 00:02: registered as rtc0
[sam. mai  9 08:54:45 2020] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[sam. mai  9 08:54:45 2020] intel_pstate: Intel P-state driver initializing
[sam. mai  9 08:54:45 2020] ledtrig-cpu: registered to indicate activity on CPUs
[sam. mai  9 08:54:45 2020] drop_monitor: Initializing network drop monitor service
[sam. mai  9 08:54:45 2020] NET: Registered protocol family 10
[sam. mai  9 08:54:45 2020] Segment Routing with IPv6
[sam. mai  9 08:54:45 2020] NET: Registered protocol family 17
[sam. mai  9 08:54:45 2020] RAS: Correctable Errors collector initialized.
[sam. mai  9 08:54:45 2020] microcode: sig=0x40651, pf=0x40, revision=0xa
[sam. mai  9 08:54:45 2020] microcode: Microcode Update Driver: v2.2.
[sam. mai  9 08:54:45 2020] IPI shorthand broadcast: enabled
[sam. mai  9 08:54:45 2020] sched_clock: Marking stable (812942295, 1564730)->(818688361, -4181336)
[sam. mai  9 08:54:45 2020] registered taskstats version 1
[sam. mai  9 08:54:45 2020] Loading compiled-in X.509 certificates
[sam. mai  9 08:54:45 2020] Loaded X.509 cert 'Build time autogenerated kernel key: 3173f57ffc4f79528759736b0e979de68a36535c'
[sam. mai  9 08:54:45 2020] zswap: loaded using pool lzo/zbud
[sam. mai  9 08:54:45 2020] Key type ._fscrypt registered
[sam. mai  9 08:54:45 2020] Key type .fscrypt registered
[sam. mai  9 08:54:45 2020] Key type fscrypt-provisioning registered
[sam. mai  9 08:54:45 2020] Key type big_key registered
[sam. mai  9 08:54:45 2020] PM:   Magic number: 4:195:923
[sam. mai  9 08:54:45 2020] rtc_cmos 00:02: setting system clock to 2020-05-09T06:54:46 UTC (1589007286)
[sam. mai  9 08:54:46 2020] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[sam. mai  9 08:54:46 2020] ata4.00: supports DRM functions and may not be fully accessible
[sam. mai  9 08:54:46 2020] ata4.00: READ LOG DMA EXT failed, trying PIO
[sam. mai  9 08:54:46 2020] ata4.00: disabling queued TRIM support
[sam. mai  9 08:54:46 2020] ata4.00: ATA-9: Crucial_CT120M500SSD3, MU03, max UDMA/133
[sam. mai  9 08:54:46 2020] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[sam. mai  9 08:54:46 2020] ata4.00: supports DRM functions and may not be fully accessible
[sam. mai  9 08:54:46 2020] ata4.00: disabling queued TRIM support
[sam. mai  9 08:54:46 2020] ata4.00: configured for UDMA/133
[sam. mai  9 08:54:46 2020] ahci 0000:00:1f.2: port does not support device sleep
[sam. mai  9 08:54:46 2020] scsi 3:0:0:0: Direct-Access     ATA      Crucial_CT120M50 MU03 PQ: 0 ANSI: 5
[sam. mai  9 08:54:46 2020] ata4.00: Enabling discard_zeroes_data
[sam. mai  9 08:54:46 2020] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[sam. mai  9 08:54:46 2020] sd 3:0:0:0: [sda] 4096-byte physical blocks
[sam. mai  9 08:54:46 2020] sd 3:0:0:0: [sda] Write Protect is off
[sam. mai  9 08:54:46 2020] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[sam. mai  9 08:54:46 2020] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[sam. mai  9 08:54:46 2020] ata4.00: Enabling discard_zeroes_data
[sam. mai  9 08:54:46 2020]  sda: sda1 sda2 sda3
[sam. mai  9 08:54:46 2020] ata4.00: Enabling discard_zeroes_data
[sam. mai  9 08:54:46 2020] sd 3:0:0:0: [sda] supports TCG Opal
[sam. mai  9 08:54:46 2020] sd 3:0:0:0: [sda] Attached SCSI disk
[sam. mai  9 08:54:46 2020] Freeing unused decrypted memory: 2040K
[sam. mai  9 08:54:46 2020] Freeing unused kernel image (initmem) memory: 1620K
[sam. mai  9 08:54:46 2020] Write protecting the kernel read-only data: 20480k
[sam. mai  9 08:54:46 2020] Freeing unused kernel image (text/rodata gap) memory: 2044K
[sam. mai  9 08:54:46 2020] Freeing unused kernel image (rodata/data gap) memory: 1640K
[sam. mai  9 08:54:46 2020] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[sam. mai  9 08:54:46 2020] x86/mm: Checking user space page tables
[sam. mai  9 08:54:46 2020] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[sam. mai  9 08:54:46 2020] Run /init as init process
[sam. mai  9 08:54:46 2020]   with arguments:
[sam. mai  9 08:54:46 2020]     /init
[sam. mai  9 08:54:46 2020]   with environment:
[sam. mai  9 08:54:46 2020]     HOME=/
[sam. mai  9 08:54:46 2020]     TERM=linux
[sam. mai  9 08:54:46 2020]     BOOT_IMAGE=../vmlinuz-linux
[sam. mai  9 08:54:46 2020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[sam. mai  9 08:54:46 2020] ehci-pci: EHCI PCI platform driver
[sam. mai  9 08:54:46 2020] ehci-pci 0000:00:1d.0: EHCI Host Controller
[sam. mai  9 08:54:46 2020] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[sam. mai  9 08:54:46 2020] ehci-pci 0000:00:1d.0: debug port 2
[sam. mai  9 08:54:46 2020] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[sam. mai  9 08:54:46 2020] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[sam. mai  9 08:54:46 2020] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[sam. mai  9 08:54:46 2020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[sam. mai  9 08:54:46 2020] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[sam. mai  9 08:54:46 2020] usb usb1: Product: EHCI Host Controller
[sam. mai  9 08:54:46 2020] usb usb1: Manufacturer: Linux 5.6.8-arch1-1 ehci_hcd
[sam. mai  9 08:54:46 2020] usb usb1: SerialNumber: 0000:00:1d.0
[sam. mai  9 08:54:46 2020] hub 1-0:1.0: USB hub found
[sam. mai  9 08:54:46 2020] hub 1-0:1.0: 2 ports detected
[sam. mai  9 08:54:46 2020] xhci_hcd 0000:00:14.0: xHCI Host Controller
[sam. mai  9 08:54:46 2020] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[sam. mai  9 08:54:46 2020] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[sam. mai  9 08:54:46 2020] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[sam. mai  9 08:54:46 2020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[sam. mai  9 08:54:46 2020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[sam. mai  9 08:54:46 2020] usb usb2: Product: xHCI Host Controller
[sam. mai  9 08:54:46 2020] usb usb2: Manufacturer: Linux 5.6.8-arch1-1 xhci-hcd
[sam. mai  9 08:54:46 2020] usb usb2: SerialNumber: 0000:00:14.0
[sam. mai  9 08:54:46 2020] hub 2-0:1.0: USB hub found
[sam. mai  9 08:54:46 2020] hub 2-0:1.0: 9 ports detected
[sam. mai  9 08:54:46 2020] xhci_hcd 0000:00:14.0: xHCI Host Controller
[sam. mai  9 08:54:46 2020] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[sam. mai  9 08:54:46 2020] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[sam. mai  9 08:54:46 2020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[sam. mai  9 08:54:46 2020] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[sam. mai  9 08:54:46 2020] usb usb3: Product: xHCI Host Controller
[sam. mai  9 08:54:46 2020] usb usb3: Manufacturer: Linux 5.6.8-arch1-1 xhci-hcd
[sam. mai  9 08:54:46 2020] usb usb3: SerialNumber: 0000:00:14.0
[sam. mai  9 08:54:46 2020] hub 3-0:1.0: USB hub found
[sam. mai  9 08:54:46 2020] hub 3-0:1.0: 4 ports detected
[sam. mai  9 08:54:46 2020] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[sam. mai  9 08:54:46 2020] random: fast init done
[sam. mai  9 08:54:46 2020] systemd[1]: systemd 245.5-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[sam. mai  9 08:54:46 2020] systemd[1]: Detected architecture x86-64.
[sam. mai  9 08:54:46 2020] usb 1-1: new high-speed USB device number 2 using ehci-pci
[sam. mai  9 08:54:46 2020] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[sam. mai  9 08:54:46 2020] systemd[1]: Set hostname to <Chon1404>.
[sam. mai  9 08:54:46 2020] tsc: Refined TSC clocksource calibration: 1696.073 MHz
[sam. mai  9 08:54:46 2020] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[sam. mai  9 08:54:46 2020] clocksource: Switched to clocksource tsc
[sam. mai  9 08:54:46 2020] usb 2-4: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01
[sam. mai  9 08:54:46 2020] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[sam. mai  9 08:54:46 2020] hub 2-4:1.0: USB hub found
[sam. mai  9 08:54:46 2020] hub 2-4:1.0: 4 ports detected
[sam. mai  9 08:54:46 2020] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[sam. mai  9 08:54:46 2020] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[sam. mai  9 08:54:46 2020] hub 1-1:1.0: USB hub found
[sam. mai  9 08:54:46 2020] hub 1-1:1.0: 8 ports detected
[sam. mai  9 08:54:46 2020] systemd[1]: Created slice system-getty.slice.
[sam. mai  9 08:54:46 2020] systemd[1]: Created slice system-modprobe.slice.
[sam. mai  9 08:54:46 2020] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[sam. mai  9 08:54:46 2020] systemd[1]: Created slice User and Session Slice.
[sam. mai  9 08:54:46 2020] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[sam. mai  9 08:54:46 2020] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[sam. mai  9 08:54:46 2020] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[sam. mai  9 08:54:46 2020] systemd[1]: Reached target Local Encrypted Volumes.
[sam. mai  9 08:54:46 2020] systemd[1]: Reached target Remote File Systems.
[sam. mai  9 08:54:46 2020] systemd[1]: Reached target Slices.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on LVM2 metadata daemon socket.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on LVM2 poll daemon socket.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on Process Core Dump Socket.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on initctl Compatibility Named Pipe.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on Journal Audit Socket.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on Journal Socket (/dev/log).
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on Journal Socket.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on udev Control Socket.
[sam. mai  9 08:54:46 2020] systemd[1]: Listening on udev Kernel Socket.
[sam. mai  9 08:54:46 2020] systemd[1]: Mounting Huge Pages File System...
[sam. mai  9 08:54:46 2020] systemd[1]: Mounting POSIX Message Queue File System...
[sam. mai  9 08:54:46 2020] systemd[1]: Mounting Kernel Debug File System...
[sam. mai  9 08:54:46 2020] systemd[1]: Mounting Kernel Trace File System...
[sam. mai  9 08:54:46 2020] systemd[1]: Starting Create list of static device nodes for the current kernel...
[sam. mai  9 08:54:46 2020] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[sam. mai  9 08:54:46 2020] systemd[1]: Starting Load Kernel Module drm...
[sam. mai  9 08:54:46 2020] systemd[1]: Starting Set Up Additional Binary Formats...
[sam. mai  9 08:54:46 2020] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[sam. mai  9 08:54:46 2020] systemd[1]: Starting Journal Service...
[sam. mai  9 08:54:46 2020] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[sam. mai  9 08:54:46 2020] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[sam. mai  9 08:54:46 2020] systemd[1]: Mounting Kernel Configuration File System...
[sam. mai  9 08:54:46 2020] systemd[1]: Starting Remount Root and Kernel File Systems...
[sam. mai  9 08:54:46 2020] systemd[1]: Starting Apply Kernel Variables...
[sam. mai  9 08:54:46 2020] Linux agpgart interface v0.103
[sam. mai  9 08:54:46 2020] systemd[1]: Starting udev Coldplug all Devices...
[sam. mai  9 08:54:46 2020] random: lvm: uninitialized urandom read (4 bytes read)
[sam. mai  9 08:54:46 2020] systemd[1]: Mounted Huge Pages File System.
[sam. mai  9 08:54:46 2020] systemd[1]: Mounted POSIX Message Queue File System.
[sam. mai  9 08:54:46 2020] systemd[1]: Mounted Kernel Debug File System.
[sam. mai  9 08:54:46 2020] systemd[1]: Mounted Kernel Trace File System.
[sam. mai  9 08:54:46 2020] systemd[1]: Finished Create list of static device nodes for the current kernel.
[sam. mai  9 08:54:46 2020] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 266 (systemd-binfmt)
[sam. mai  9 08:54:46 2020] EXT4-fs (sda1): re-mounted. Opts: (null)
[sam. mai  9 08:54:46 2020] systemd[1]: Mounted Kernel Configuration File System.
[sam. mai  9 08:54:46 2020] systemd[1]: Finished Remount Root and Kernel File Systems.
[sam. mai  9 08:54:46 2020] systemd[1]: Finished Apply Kernel Variables.
[sam. mai  9 08:54:46 2020] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[sam. mai  9 08:54:46 2020] systemd[1]: Started LVM2 metadata daemon.
[sam. mai  9 08:54:46 2020] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[sam. mai  9 08:54:47 2020] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[sam. mai  9 08:54:47 2020] systemd[1]: Starting Load/Save Random Seed...
[sam. mai  9 08:54:47 2020] systemd[1]: Condition check resulted in Create System Users being skipped.
[sam. mai  9 08:54:47 2020] systemd[1]: Starting Create Static Device Nodes in /dev...
[sam. mai  9 08:54:47 2020] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[sam. mai  9 08:54:47 2020] systemd[1]: Finished Set Up Additional Binary Formats.
[sam. mai  9 08:54:47 2020] usb 2-7: new full-speed USB device number 3 using xhci_hcd
[sam. mai  9 08:54:47 2020] systemd[1]: Finished Create Static Device Nodes in /dev.
[sam. mai  9 08:54:47 2020] systemd[1]: Starting udev Kernel Device Manager...
[sam. mai  9 08:54:47 2020] systemd[1]: modprobe@drm.service: Succeeded.
[sam. mai  9 08:54:47 2020] systemd[1]: Finished Load Kernel Module drm.
[sam. mai  9 08:54:47 2020] systemd[1]: Finished udev Coldplug all Devices.
[sam. mai  9 08:54:47 2020] usb 2-7: New USB device found, idVendor=13d3, idProduct=3394, bcdDevice= 2.00
[sam. mai  9 08:54:47 2020] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[sam. mai  9 08:54:47 2020] usb 2-7: Product: RT Bluetooth Radio
[sam. mai  9 08:54:47 2020] usb 2-7: Manufacturer: Realtek
[sam. mai  9 08:54:47 2020] usb 2-7: SerialNumber: 00e04c000001
[sam. mai  9 08:54:47 2020] usb 2-4.1: new low-speed USB device number 4 using xhci_hcd
[sam. mai  9 08:54:47 2020] usb 2-4.1: New USB device found, idVendor=046d, idProduct=c063, bcdDevice=57.00
[sam. mai  9 08:54:47 2020] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[sam. mai  9 08:54:47 2020] usb 2-4.1: Product: DELL USB Laser Mouse
[sam. mai  9 08:54:47 2020] usb 2-4.1: Manufacturer: DELL
[sam. mai  9 08:54:47 2020] usb 2-4.2: new low-speed USB device number 5 using xhci_hcd
[sam. mai  9 08:54:47 2020] usb 2-4.2: New USB device found, idVendor=0e8f, idProduct=0022, bcdDevice= 2.10
[sam. mai  9 08:54:47 2020] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[sam. mai  9 08:54:47 2020] usb 2-4.2: Product: USB KB V11
[sam. mai  9 08:54:47 2020] usb 2-4.2: Manufacturer: GASIA
[sam. mai  9 08:54:47 2020] systemd[1]: Started Journal Service.
[sam. mai  9 08:54:47 2020] audit: type=1130 audit(1589007288.199:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:47 2020] systemd-journald[267]: Received client request to flush runtime journal.
[sam. mai  9 08:54:47 2020] audit: type=1130 audit(1589007288.272:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:47 2020] audit: type=1130 audit(1589007288.392:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:47 2020] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[sam. mai  9 08:54:47 2020] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[sam. mai  9 08:54:47 2020] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[sam. mai  9 08:54:47 2020] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[sam. mai  9 08:54:47 2020] RAPL PMU: hw unit of domain package 2^-14 Joules
[sam. mai  9 08:54:47 2020] RAPL PMU: hw unit of domain dram 2^-14 Joules
[sam. mai  9 08:54:47 2020] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[sam. mai  9 08:54:47 2020] Adding 8499196k swap on /dev/sda2.  Priority:-2 extents:1 across:8499196k SSFS
[sam. mai  9 08:54:47 2020] input: PC Speaker as /devices/platform/pcspkr/input/input2
[sam. mai  9 08:54:47 2020] cryptd: max_cpu_qlen set to 1000
[sam. mai  9 08:54:48 2020] audit: type=1130 audit(1589007288.706:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:48 2020] libphy: r8169: probed
[sam. mai  9 08:54:48 2020] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 74:d4:35:60:cb:75, XID 4c0, IRQ 48
[sam. mai  9 08:54:48 2020] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[sam. mai  9 08:54:48 2020] AVX2 version of gcm_enc/dec engaged.
[sam. mai  9 08:54:48 2020] AES CTR mode by8 optimization enabled
[sam. mai  9 08:54:48 2020] audit: type=1130 audit(1589007288.779:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-57b140b9\x2de7ed\x2d42d6\x2da03b\x2ddba4ff5d4e3a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:48 2020] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[sam. mai  9 08:54:48 2020] audit: type=1130 audit(1589007288.839:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:48 2020] audit: type=1127 audit(1589007288.856:8): pid=360 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:48 2020] audit: type=1130 audit(1589007288.862:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:48 2020] hid: raw HID events driver (C) Jiri Kosina
[sam. mai  9 08:54:48 2020] iTCO_vendor_support: vendor-support=0
[sam. mai  9 08:54:48 2020] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[sam. mai  9 08:54:48 2020] usbcore: registered new interface driver usbhid
[sam. mai  9 08:54:48 2020] usbhid: USB HID core driver
[sam. mai  9 08:54:48 2020] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[sam. mai  9 08:54:48 2020] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[sam. mai  9 08:54:48 2020] cfg80211: failed to load regulatory.db
[sam. mai  9 08:54:48 2020] r8169 0000:03:00.0 enp3s0: renamed from eth0
[sam. mai  9 08:54:48 2020] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[sam. mai  9 08:54:48 2020] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[sam. mai  9 08:54:48 2020] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[sam. mai  9 08:54:48 2020] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.0/0003:046D:C063.0001/input/input3
[sam. mai  9 08:54:48 2020] hid-generic 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:14.0-4.1/input0
[sam. mai  9 08:54:48 2020] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.0/0003:0E8F:0022.0002/input/input4
[sam. mai  9 08:54:48 2020] Bluetooth: Core ver 2.22
[sam. mai  9 08:54:48 2020] NET: Registered protocol family 31
[sam. mai  9 08:54:48 2020] Bluetooth: HCI device and connection manager initialized
[sam. mai  9 08:54:48 2020] Bluetooth: HCI socket layer initialized
[sam. mai  9 08:54:48 2020] Bluetooth: L2CAP socket layer initialized
[sam. mai  9 08:54:48 2020] Bluetooth: SCO socket layer initialized
[sam. mai  9 08:54:48 2020] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
[sam. mai  9 08:54:48 2020] hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:00:14.0-4.2/input0
[sam. mai  9 08:54:48 2020] input: GASIA USB KB V11 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.1/0003:0E8F:0022.0003/input/input5
[sam. mai  9 08:54:48 2020] input: GASIA USB KB V11 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.1/0003:0E8F:0022.0003/input/input6
[sam. mai  9 08:54:48 2020] Creating 1 MTD partitions on "intel-spi":
[sam. mai  9 08:54:48 2020] 0x000000000000-0x000000800000 : "BIOS"
[sam. mai  9 08:54:48 2020] hid-generic 0003:0E8F:0022.0003: input,hidraw2: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:00:14.0-4.2/input1
[sam. mai  9 08:54:48 2020] mousedev: PS/2 mouse device common for all mice
[sam. mai  9 08:54:48 2020] usbcore: registered new interface driver btusb
[sam. mai  9 08:54:48 2020] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:hp
[sam. mai  9 08:54:48 2020] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[sam. mai  9 08:54:48 2020] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[sam. mai  9 08:54:48 2020] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[sam. mai  9 08:54:48 2020] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[sam. mai  9 08:54:48 2020] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[sam. mai  9 08:54:48 2020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[sam. mai  9 08:54:48 2020] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[sam. mai  9 08:54:48 2020] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[sam. mai  9 08:54:48 2020] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723a_fw.bin
[sam. mai  9 08:54:48 2020] audit: type=1130 audit(1589007289.459:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:49 2020] i915 0000:00:02.0: vgaarb: deactivate vga console
[sam. mai  9 08:54:49 2020] Console: switching to colour dummy device 80x25
[sam. mai  9 08:54:49 2020] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[sam. mai  9 08:54:49 2020] [drm] Driver supports precise vblank timestamp query.
[sam. mai  9 08:54:49 2020] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[sam. mai  9 08:54:49 2020] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[sam. mai  9 08:54:49 2020] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[sam. mai  9 08:54:49 2020] acpi device:65: registered as cooling_device9
[sam. mai  9 08:54:49 2020] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[sam. mai  9 08:54:49 2020] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[sam. mai  9 08:54:49 2020] random: avahi-daemon: uninitialized urandom read (4 bytes read)
[sam. mai  9 08:54:49 2020] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[sam. mai  9 08:54:49 2020] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[sam. mai  9 08:54:49 2020] random: crng init done
[sam. mai  9 08:54:49 2020] fbcon: i915drmfb (fb0) is primary device
[sam. mai  9 08:54:49 2020] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[sam. mai  9 08:54:49 2020] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[sam. mai  9 08:54:49 2020] rtlwifi: rtlwifi: wireless switch is on
[sam. mai  9 08:54:49 2020] rtl8723ae 0000:02:00.0 wlp2s0: renamed from wlan0
[sam. mai  9 08:54:49 2020] Console: switching to colour frame buffer device 160x64
[sam. mai  9 08:54:49 2020] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[sam. mai  9 08:54:49 2020] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[sam. mai  9 08:54:49 2020] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[sam. mai  9 08:54:49 2020] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[sam. mai  9 08:54:49 2020] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[sam. mai  9 08:54:49 2020] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[sam. mai  9 08:54:49 2020] intel_rapl_common: Found RAPL domain package
[sam. mai  9 08:54:49 2020] intel_rapl_common: Found RAPL domain core
[sam. mai  9 08:54:49 2020] intel_rapl_common: Found RAPL domain uncore
[sam. mai  9 08:54:49 2020] intel_rapl_common: Found RAPL domain dram
[sam. mai  9 08:54:49 2020] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[sam. mai  9 08:54:49 2020] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[sam. mai  9 08:54:49 2020] Bluetooth: hci0: RTL: fw version 0x0e3da5b1
[sam. mai  9 08:54:49 2020] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[sam. mai  9 08:54:50 2020] r8169 0000:03:00.0 enp3s0: Link is Down
[sam. mai  9 08:54:53 2020] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[sam. mai  9 08:54:53 2020] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[sam. mai  9 08:54:54 2020] kauditd_printk_skb: 16 callbacks suppressed
[sam. mai  9 08:54:54 2020] audit: type=1130 audit(1589007294.806:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:54 2020] audit: type=1131 audit(1589007294.902:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:54 2020] audit: type=1130 audit(1589007294.919:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:54:54 2020] audit: type=1130 audit(1589007295.049:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:00 2020] audit: type=1131 audit(1589007300.666:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:02 2020] audit: type=1100 audit(1589007302.699:32): pid=423 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="chon" exe="/usr/bin/login" hostname=Chon1404 addr=? terminal=tty1 res=success'
[sam. mai  9 08:55:02 2020] audit: type=1101 audit(1589007302.712:33): pid=423 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="chon" exe="/usr/bin/login" hostname=Chon1404 addr=? terminal=tty1 res=success'
[sam. mai  9 08:55:02 2020] audit: type=1103 audit(1589007302.712:34): pid=423 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="chon" exe="/usr/bin/login" hostname=Chon1404 addr=? terminal=tty1 res=success'
[sam. mai  9 08:55:02 2020] audit: type=1006 audit(1589007302.712:35): pid=423 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[sam. mai  9 08:55:02 2020] audit: type=1130 audit(1589007302.749:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:02 2020] audit: type=1101 audit(1589007302.756:37): pid=463 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="chon" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:02 2020] audit: type=1103 audit(1589007302.756:38): pid=463 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="chon" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[sam. mai  9 08:55:02 2020] audit: type=1006 audit(1589007302.759:39): pid=463 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[sam. mai  9 08:55:02 2020] audit: type=1105 audit(1589007302.759:40): pid=463 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="chon" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:02 2020] process '/usr/bin/rslsync' started with executable stack
[sam. mai  9 08:55:03 2020] fuse: init (API version 7.31)
[sam. mai  9 08:55:03 2020] *** VALIDATE fuseblk ***
[sam. mai  9 08:55:03 2020] *** VALIDATE fuse ***
[sam. mai  9 08:55:06 2020] kauditd_printk_skb: 6 callbacks suppressed
[sam. mai  9 08:55:06 2020] audit: type=1130 audit(1589007307.299:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:06 2020] audit: type=1334 audit(1589007307.379:48): prog-id=12 op=LOAD
[sam. mai  9 08:55:06 2020] audit: type=1334 audit(1589007307.382:49): prog-id=13 op=LOAD
[sam. mai  9 08:55:07 2020] audit: type=1130 audit(1589007308.002:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:07 2020] audit: type=1130 audit(1589007308.382:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:07 2020] audit: type=1105 audit(1589007308.479:52): pid=880 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:14 2020] audit: type=1111 audit(1589007315.639:53): pid=408 uid=0 auid=4294967295 ses=4294967295 msg='op=device-disconnect interface="enp3s0" ifindex=2 pid=781 uid=1000 result=success exe="/usr/bin/NetworkManager" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:15 2020] audit: type=1130 audit(1589007315.659:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:19 2020] audit: type=1131 audit(1589007320.522:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:19 2020] audit: type=1334 audit(1589007320.646:56): prog-id=10 op=UNLOAD
[sam. mai  9 08:55:19 2020] audit: type=1334 audit(1589007320.646:57): prog-id=9 op=UNLOAD
[sam. mai  9 08:55:25 2020] audit: type=1131 audit(1589007325.669:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:39 2020] audit: type=1111 audit(1589007339.662:59): pid=408 uid=0 auid=4294967295 ses=4294967295 msg='op=connection-activate uuid=2bd31cb6-dca2-34ef-a401-771d2a2c1306 name="VeroChon" pid=781 uid=1000 result=success exe="/usr/bin/NetworkManager" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:40 2020] audit: type=1130 audit(1589007340.706:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:55:50 2020] audit: type=1131 audit(1589007350.669:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 08:56:02 2020] FS-Cache: Loaded
[sam. mai  9 08:56:02 2020] RPC: Registered named UNIX socket transport module.
[sam. mai  9 08:56:02 2020] RPC: Registered udp transport module.
[sam. mai  9 08:56:02 2020] RPC: Registered tcp transport module.
[sam. mai  9 08:56:02 2020] RPC: Registered tcp NFSv4.1 backchannel transport module.
[sam. mai  9 08:56:03 2020] FS-Cache: Netfs 'nfs' registered for caching
[sam. mai  9 08:56:03 2020] *** VALIDATE nfs ***
[sam. mai  9 08:56:03 2020] *** VALIDATE nfs4 ***
[sam. mai  9 08:56:03 2020] Key type dns_resolver registered
[sam. mai  9 08:56:03 2020] NFS: Registering the id_resolver key type
[sam. mai  9 08:56:03 2020] Key type id_resolver registered
[sam. mai  9 08:56:03 2020] Key type id_legacy registered
[sam. mai  9 08:56:03 2020] NFS4: Couldn't follow remote path
[sam. mai  9 09:10:23 2020] audit: type=1130 audit(1589008224.914:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[sam. mai  9 09:10:23 2020] audit: type=1131 audit(1589008224.914:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Et la commande thunar ouvre la fenêtre du home comme écrit précédemment.
CoudUr a écrit :
ven. 08 mai 2020, 17:04
Je sais que tu as déjà essayé avec ton fichier "/etc/fstab" modifié mais si j'étais toi j'essayerai aussi en coupant le réseau pour être sûr que rien ne transite, ça ne mange pas de pain, bref il faut tenter plusieurs choses quoi.
Alors là, peut-être une piste !!
Après boot, si je désactive le réseau avant toute autre chose, le 1re ouverture d'un dossier (mon home) est quasi instantanée (pas plus d'1 seconde).
Si ensuite je réactive le réseau, les ouvertures restent instantanées.
ArchLinux/SysLinux/XFce en MonoBoot
GIGABYTE Brix GB-BXi3-4010 - RAM 8Go - SSD 120Go - Video Intel HD Graphics 4400 - Audio Realtek ALC269
Avatar de l’utilisateur
RoyalPanda
yeomen
Messages : 208
Inscription : lun. 19 mai 2014, 09:08

Re: [Ouverture de dossiers] Temps d'ouverture

Message par RoyalPanda »

Bonjour,

Comme précisé par CoudUr, thunar est-il démonisé ? https://wiki.archlinux.org/index.php/Th ... aemon_mode
Répondre