J'ai besoin de vos lumières, je patauge...
Pour être concis, bootchart m'indique 19 secondes pour charger le système, et c'est effectivement ce que je constate jusqu'à une invite fugaçe console.
Ensuite, mon soucis :
ecran noir pendant une vingtaine de seconde, invite de session, mot de passe, et re-vingtaine de seconde avant d'avoir un bureau fonctionnel.
Est ce normal à votre avis ?
pour info, mon /etc/hosts
Code : Tout sélectionner
#
# /etc/hosts: static lookup table for host names
#
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost Pandora
# End of fileCode : Tout sélectionner
[ 20.363]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 20.363]
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[ 20.363] X Protocol Version 11, Revision 0
[ 20.363] Build Operating System: Linux 3.3.6-1-ARCH x86_64
[ 20.363] Current Operating System: Linux Pandora 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
[ 20.363] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sdb2
[ 20.363] Build Date: 20 May 2012 07:44:29AM
[ 20.363]
[ 20.363] Current version of pixman: 0.24.4
[ 20.363] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.363] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.363] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 25 00:52:23 2012
[ 20.403] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.429] (==) No Layout section. Using the first Screen section.
[ 20.429] (==) No screen section available. Using defaults.
[ 20.429] (**) |-->Screen "Default Screen Section" (0)
[ 20.429] (**) | |-->Monitor "<default monitor>"
[ 20.429] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.429] (==) Automatically adding devices
[ 20.429] (==) Automatically enabling devices
[ 20.492] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.492] Entry deleted from font path.
[ 20.518] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.518] Entry deleted from font path.
[ 20.518] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.540] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.540] Entry deleted from font path.
[ 20.540] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.540] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.540] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.540] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.540] (II) Loader magic: 0x7c8ae0
[ 20.540] (II) Module ABI versions:
[ 20.540] X.Org ANSI C Emulation: 0.4
[ 20.540] X.Org Video Driver: 12.0
[ 20.540] X.Org XInput driver : 16.0
[ 20.540] X.Org Server Extension : 6.0
[ 20.540] (--) PCI:*(0:0:2:0) 8086:0116:1043:15e2 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 20.541] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.541] (II) LoadModule: "extmod"
[ 20.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.632] (II) Module extmod: vendor="X.Org Foundation"
[ 20.632] compiled for 1.12.1.902, module version = 1.0.0
[ 20.632] Module class: X.Org Server Extension
[ 20.632] ABI class: X.Org Server Extension, version 6.0
[ 20.632] (II) Loading extension MIT-SCREEN-SAVER
[ 20.632] (II) Loading extension XFree86-VidModeExtension
[ 20.632] (II) Loading extension XFree86-DGA
[ 20.632] (II) Loading extension DPMS
[ 20.632] (II) Loading extension XVideo
[ 20.632] (II) Loading extension XVideo-MotionCompensation
[ 20.632] (II) Loading extension X-Resource
[ 20.632] (II) LoadModule: "dbe"
[ 20.633] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.643] (II) Module dbe: vendor="X.Org Foundation"
[ 20.643] compiled for 1.12.1.902, module version = 1.0.0
[ 20.643] Module class: X.Org Server Extension
[ 20.643] ABI class: X.Org Server Extension, version 6.0
[ 20.643] (II) Loading extension DOUBLE-BUFFER
[ 20.643] (II) LoadModule: "glx"
[ 20.643] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.658] (II) Module glx: vendor="X.Org Foundation"
[ 20.658] compiled for 1.12.1.902, module version = 1.0.0
[ 20.658] ABI class: X.Org Server Extension, version 6.0
[ 20.658] (==) AIGLX enabled
[ 20.658] (II) Loading extension GLX
[ 20.658] (II) LoadModule: "record"
[ 20.658] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.670] (II) Module record: vendor="X.Org Foundation"
[ 20.670] compiled for 1.12.1.902, module version = 1.13.0
[ 20.670] Module class: X.Org Server Extension
[ 20.670] ABI class: X.Org Server Extension, version 6.0
[ 20.670] (II) Loading extension RECORD
[ 20.670] (II) LoadModule: "dri"
[ 20.670] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.687] (II) Module dri: vendor="X.Org Foundation"
[ 20.687] compiled for 1.12.1.902, module version = 1.0.0
[ 20.687] ABI class: X.Org Server Extension, version 6.0
[ 20.687] (II) Loading extension XFree86-DRI
[ 20.687] (II) LoadModule: "dri2"
[ 20.687] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.690] (II) Module dri2: vendor="X.Org Foundation"
[ 20.690] compiled for 1.12.1.902, module version = 1.2.0
[ 20.690] ABI class: X.Org Server Extension, version 6.0
[ 20.690] (II) Loading extension DRI2
[ 20.690] (==) Matched intel as autoconfigured driver 0
[ 20.690] (==) Matched vesa as autoconfigured driver 1
[ 20.690] (==) Matched fbdev as autoconfigured driver 2
[ 20.690] (==) Assigned the driver to the xf86ConfigLayout
[ 20.690] (II) LoadModule: "intel"
[ 20.738] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.934] (II) Module intel: vendor="X.Org Foundation"
[ 20.934] compiled for 1.12.1, module version = 2.19.0
[ 20.934] Module class: X.Org Video Driver
[ 20.934] ABI class: X.Org Video Driver, version 12.0
[ 20.934] (II) LoadModule: "vesa"
[ 20.951] (WW) Warning, couldn't open module vesa
[ 20.951] (II) UnloadModule: "vesa"
[ 20.951] (II) Unloading vesa
[ 20.951] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 20.951] (II) LoadModule: "fbdev"
[ 20.951] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.961] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.961] compiled for 1.11.99.903, module version = 0.4.2
[ 20.961] ABI class: X.Org Video Driver, version 12.0
[ 20.961] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 20.962] (II) FBDEV: driver for framebuffer: fbdev
[ 20.962] (++) using VT number 7
[ 20.970] (WW) Falling back to old probe method for fbdev
[ 20.970] (II) Loading sub module "fbdevhw"
[ 20.970] (II) LoadModule: "fbdevhw"
[ 20.970] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 21.040] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 21.040] compiled for 1.12.1.902, module version = 0.0.2
[ 21.040] ABI class: X.Org Video Driver, version 12.0
[ 21.040] drmOpenDevice: node name is /dev/dri/card0
[ 21.040] drmOpenDevice: open result is 8, (OK)
[ 21.040] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 21.040] drmOpenDevice: node name is /dev/dri/card0
[ 21.040] drmOpenDevice: open result is 8, (OK)
[ 21.040] drmOpenByBusid: drmOpenMinor returns 8
[ 21.040] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 21.040] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.040] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 21.040] (==) intel(0): RGB weight 888
[ 21.040] (==) intel(0): Default visual is TrueColor
[ 21.040] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 21.040] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 21.041] (**) intel(0): Relaxed fencing enabled
[ 21.041] (**) intel(0): Wait on SwapBuffers? enabled
[ 21.041] (**) intel(0): Triple buffering? enabled
[ 21.041] (**) intel(0): Framebuffer tiled
[ 21.041] (**) intel(0): Pixmaps tiled
[ 21.041] (**) intel(0): 3D buffers tiled
[ 21.041] (**) intel(0): SwapBuffers wait enabled
[ 21.041] (==) intel(0): video overlay key set to 0x101fe
[ 21.041] (II) intel(0): Output LVDS1 has no monitor section
[ 21.041] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 21.041] (II) intel(0): Output VGA1 has no monitor section
[ 21.065] (II) intel(0): Output HDMI1 has no monitor section
[ 21.103] (II) intel(0): Output DP1 has no monitor section
[ 21.103] (II) intel(0): EDID for output LVDS1
[ 21.103] (II) intel(0): Manufacturer: CMO Model: 1726 Serial#: 0
[ 21.103] (II) intel(0): Year: 2011 Week: 2
[ 21.103] (II) intel(0): EDID Version: 1.3
[ 21.103] (II) intel(0): Digital Display Input
[ 21.103] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 21.103] (II) intel(0): Gamma: 2.20
[ 21.103] (II) intel(0): No DPMS capabilities specified
[ 21.103] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 21.103] (II) intel(0): First detailed timing is preferred mode
[ 21.103] (II) intel(0): redX: 0.640 redY: 0.333 greenX: 0.303 greenY: 0.613
[ 21.103] (II) intel(0): blueX: 0.154 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 21.103] (II) intel(0): Manufacturer's mask: 0
[ 21.103] (II) intel(0): Supported detailed timing:
[ 21.103] (II) intel(0): clock: 138.7 MHz Image Size: 382 x 215 mm
[ 21.103] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 21.103] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 21.103] (II) intel(0): N173HGE-L21
[ 21.103] (II) intel(0): CMO
[ 21.103] (II) intel(0): N173HGE-L21
[ 21.103] (II) intel(0): EDID (in hex):
[ 21.103] (II) intel(0): 00ffffffffffff000daf261700000000
[ 21.103] (II) intel(0): 02150103802615780ad895a3554d9d27
[ 21.103] (II) intel(0): 0f505400000001010101010101010101
[ 21.103] (II) intel(0): 0101010101012e3680a070381f403020
[ 21.103] (II) intel(0): 35007ed710000018000000fe004e3137
[ 21.103] (II) intel(0): 334847452d4c32310a20000000fe0043
[ 21.103] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 21.103] (II) intel(0): 004e3137334847452d4c32310a200066
[ 21.103] (II) intel(0): EDID vendor "CMO", prod id 5926
[ 21.103] (II) intel(0): Printing DDC gathered Modelines:
[ 21.103] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 21.104] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 21.104] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 21.104] (II) intel(0): Printing probed modes for output LVDS1
[ 21.104] (II) intel(0): Modeline "1920x1080"x60.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 21.104] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 21.104] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 21.104] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 21.104] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 21.104] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 21.104] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 21.104] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 21.104] (II) intel(0): EDID for output VGA1
[ 21.128] (II) intel(0): EDID for output HDMI1
[ 21.166] (II) intel(0): EDID for output DP1
[ 21.166] (II) intel(0): Output LVDS1 connected
[ 21.166] (II) intel(0): Output VGA1 disconnected
[ 21.166] (II) intel(0): Output HDMI1 disconnected
[ 21.166] (II) intel(0): Output DP1 disconnected
[ 21.166] (II) intel(0): Using exact sizes for initial modes
[ 21.166] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[ 21.166] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.166] (II) intel(0): Kernel page flipping support detected, enabling
[ 21.166] (**) intel(0): Display dimensions: (380, 210) mm
[ 21.166] (**) intel(0): DPI set to (128, 130)
[ 21.166] (II) Loading sub module "fb"
[ 21.166] (II) LoadModule: "fb"
[ 21.167] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.214] (II) Module fb: vendor="X.Org Foundation"
[ 21.214] compiled for 1.12.1.902, module version = 1.0.0
[ 21.214] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.214] (II) Loading sub module "dri2"
[ 21.214] (II) LoadModule: "dri2"
[ 21.214] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 21.214] (II) Module dri2: vendor="X.Org Foundation"
[ 21.214] compiled for 1.12.1.902, module version = 1.2.0
[ 21.214] ABI class: X.Org Server Extension, version 6.0
[ 21.214] (II) UnloadModule: "fbdev"
[ 21.214] (II) Unloading fbdev
[ 21.214] (II) UnloadSubModule: "fbdevhw"
[ 21.214] (II) Unloading fbdevhw
[ 21.214] (==) Depth 24 pixmap format is 32 bpp
[ 21.214] (II) intel(0): [DRI2] Setup complete
[ 21.214] (II) intel(0): [DRI2] DRI driver: i965
[ 21.214] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 21.234] (II) UXA(0): Driver registered support for the following operations:
[ 21.234] (II) solid
[ 21.234] (II) copy
[ 21.234] (II) composite (RENDER acceleration)
[ 21.234] (II) put_image
[ 21.234] (II) get_image
[ 21.234] (==) intel(0): Backing store disabled
[ 21.234] (==) intel(0): Silken mouse enabled
[ 21.234] (II) intel(0): Initializing HW Cursor
[ 21.234] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.235] (==) intel(0): DPMS enabled
[ 21.235] (==) intel(0): Intel XvMC decoder enabled
[ 21.235] (II) intel(0): Set up textured video
[ 21.235] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 21.235] (II) intel(0): direct rendering: DRI2 Enabled
[ 21.235] (==) intel(0): hotplug detection: "enabled"
[ 21.296] (--) RandR disabled
[ 21.296] (II) Initializing built-in extension Generic Event Extension
[ 21.296] (II) Initializing built-in extension SHAPE
[ 21.296] (II) Initializing built-in extension MIT-SHM
[ 21.296] (II) Initializing built-in extension XInputExtension
[ 21.296] (II) Initializing built-in extension XTEST
[ 21.296] (II) Initializing built-in extension BIG-REQUESTS
[ 21.296] (II) Initializing built-in extension SYNC
[ 21.296] (II) Initializing built-in extension XKEYBOARD
[ 21.296] (II) Initializing built-in extension XC-MISC
[ 21.296] (II) Initializing built-in extension SECURITY
[ 21.296] (II) Initializing built-in extension XINERAMA
[ 21.296] (II) Initializing built-in extension XFIXES
[ 21.296] (II) Initializing built-in extension RENDER
[ 21.297] (II) Initializing built-in extension RANDR
[ 21.297] (II) Initializing built-in extension COMPOSITE
[ 21.297] (II) Initializing built-in extension DAMAGE
[ 21.534] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.534] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.534] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.534] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.534] (II) AIGLX: Loaded and initialized i965
[ 21.534] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.534] (II) intel(0): Setting screen physical size to 508 x 285
[ 21.825] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.825] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.825] (II) LoadModule: "evdev"
[ 21.826] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.840] (II) Module evdev: vendor="X.Org Foundation"
[ 21.840] compiled for 1.12.0, module version = 2.7.0
[ 21.840] Module class: X.Org XInput Driver
[ 21.840] ABI class: X.Org XInput driver, version 16.0
[ 21.840] (II) Using input driver 'evdev' for 'Power Button'
[ 21.840] (**) Power Button: always reports core events
[ 21.840] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 21.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.840] (--) evdev: Power Button: Found keys
[ 21.840] (II) evdev: Power Button: Configuring as keyboard
[ 21.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 21.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.840] (**) Option "xkb_rules" "evdev"
[ 21.840] (**) Option "xkb_model" "evdev"
[ 21.840] (**) Option "xkb_layout" "fr"
[ 21.840] (**) Option "xkb_variant" "latin9"
[ 21.896] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 21.896] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.896] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.896] (**) Video Bus: always reports core events
[ 21.896] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 21.896] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.896] (--) evdev: Video Bus: Found keys
[ 21.896] (II) evdev: Video Bus: Configuring as keyboard
[ 21.896] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 21.896] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.896] (**) Option "xkb_rules" "evdev"
[ 21.897] (**) Option "xkb_model" "evdev"
[ 21.897] (**) Option "xkb_layout" "fr"
[ 21.897] (**) Option "xkb_variant" "latin9"
[ 21.897] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 21.897] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.897] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.897] (**) Video Bus: always reports core events
[ 21.897] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 21.897] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.897] (--) evdev: Video Bus: Found keys
[ 21.897] (II) evdev: Video Bus: Configuring as keyboard
[ 21.897] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input4/event4"
[ 21.897] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 21.897] (**) Option "xkb_rules" "evdev"
[ 21.897] (**) Option "xkb_model" "evdev"
[ 21.897] (**) Option "xkb_layout" "fr"
[ 21.897] (**) Option "xkb_variant" "latin9"
[ 21.898] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 21.898] (II) No input driver specified, ignoring this device.
[ 21.898] (II) This device may have been added with another device file.
[ 21.898] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 21.898] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.898] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.898] (**) Sleep Button: always reports core events
[ 21.898] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 21.898] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.898] (--) evdev: Sleep Button: Found keys
[ 21.898] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.898] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 21.898] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.898] (**) Option "xkb_rules" "evdev"
[ 21.898] (**) Option "xkb_model" "evdev"
[ 21.898] (**) Option "xkb_layout" "fr"
[ 21.898] (**) Option "xkb_variant" "latin9"
[ 21.898] (II) config/udev: Adding input device USB2.0 UVC 2M WebCam (/dev/input/event9)
[ 21.898] (**) USB2.0 UVC 2M WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.899] (II) Using input driver 'evdev' for 'USB2.0 UVC 2M WebCam'
[ 21.899] (**) USB2.0 UVC 2M WebCam: always reports core events
[ 21.899] (**) evdev: USB2.0 UVC 2M WebCam: Device: "/dev/input/event9"
[ 21.899] (--) evdev: USB2.0 UVC 2M WebCam: Vendor 0x13d3 Product 0x5122
[ 21.899] (--) evdev: USB2.0 UVC 2M WebCam: Found keys
[ 21.899] (II) evdev: USB2.0 UVC 2M WebCam: Configuring as keyboard
[ 21.899] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input9/event9"
[ 21.899] (II) XINPUT: Adding extended input device "USB2.0 UVC 2M WebCam" (type: KEYBOARD, id 10)
[ 21.899] (**) Option "xkb_rules" "evdev"
[ 21.899] (**) Option "xkb_model" "evdev"
[ 21.899] (**) Option "xkb_layout" "fr"
[ 21.899] (**) Option "xkb_variant" "latin9"
[ 21.899] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 21.899] (II) No input driver specified, ignoring this device.
[ 21.899] (II) This device may have been added with another device file.
[ 21.899] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 21.899] (II) No input driver specified, ignoring this device.
[ 21.899] (II) This device may have been added with another device file.
[ 21.900] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[ 21.900] (II) No input driver specified, ignoring this device.
[ 21.900] (II) This device may have been added with another device file.
[ 21.900] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver V1.0 (/dev/input/event12)
[ 21.900] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: Applying InputClass "evdev keyboard catchall"
[ 21.900] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver V1.0'
[ 21.900] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: always reports core events
[ 21.900] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Device: "/dev/input/event12"
[ 21.900] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Vendor 0x45e Product 0x71d
[ 21.900] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found keys
[ 21.900] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Configuring as keyboard
[ 21.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1.4/3-1.1.4:1.0/input/input12/event12"
[ 21.900] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver V1.0" (type: KEYBOARD, id 11)
[ 21.900] (**) Option "xkb_rules" "evdev"
[ 21.900] (**) Option "xkb_model" "evdev"
[ 21.900] (**) Option "xkb_layout" "fr"
[ 21.900] (**) Option "xkb_variant" "latin9"
[ 21.901] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver V1.0 (/dev/input/event13)
[ 21.901] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: Applying InputClass "evdev pointer catchall"
[ 21.901] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: Applying InputClass "evdev keyboard catchall"
[ 21.901] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver V1.0'
[ 21.901] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: always reports core events
[ 21.901] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Device: "/dev/input/event13"
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Vendor 0x45e Product 0x71d
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found 9 mouse buttons
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found scroll wheel(s)
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found relative axes
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found x and y relative axes
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found absolute axes
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found x and y absolute axes
[ 21.901] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Found keys
[ 21.901] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Configuring as mouse
[ 21.901] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Configuring as keyboard
[ 21.901] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: Adding scrollwheel support
[ 21.901] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: YAxisMapping: buttons 4 and 5
[ 21.901] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.901] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1.4/3-1.1.4:1.1/input/input13/event13"
[ 21.901] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver V1.0" (type: KEYBOARD, id 12)
[ 21.901] (**) Option "xkb_rules" "evdev"
[ 21.901] (**) Option "xkb_model" "evdev"
[ 21.901] (**) Option "xkb_layout" "fr"
[ 21.901] (**) Option "xkb_variant" "latin9"
[ 21.901] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: initialized for relative axes.
[ 21.901] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver V1.0: ignoring absolute axes.
[ 21.901] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: (accel) keeping acceleration scheme 1
[ 21.901] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: (accel) acceleration profile 0
[ 21.901] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: (accel) acceleration factor: 2.000
[ 21.901] (**) Microsoft Microsoft® 2.4GHz Transceiver V1.0: (accel) acceleration threshold: 4
[ 21.902] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver V1.0 (/dev/input/js0)
[ 21.902] (II) No input driver specified, ignoring this device.
[ 21.902] (II) This device may have been added with another device file.
[ 21.902] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver V1.0 (/dev/input/mouse2)
[ 21.902] (II) No input driver specified, ignoring this device.
[ 21.902] (II) This device may have been added with another device file.
[ 21.902] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event10)
[ 21.902] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 21.902] (II) Using input driver 'evdev' for '2.4GHz 2way RF Receiver'
[ 21.902] (**) 2.4GHz 2way RF Receiver: always reports core events
[ 21.902] (**) evdev: 2.4GHz 2way RF Receiver: Device: "/dev/input/event10"
[ 21.902] (--) evdev: 2.4GHz 2way RF Receiver: Vendor 0x1bcf Product 0x5ce
[ 21.902] (--) evdev: 2.4GHz 2way RF Receiver: Found keys
[ 21.902] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as keyboard
[ 21.902] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input10/event10"
[ 21.902] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: KEYBOARD, id 13)
[ 21.902] (**) Option "xkb_rules" "evdev"
[ 21.902] (**) Option "xkb_model" "evdev"
[ 21.902] (**) Option "xkb_layout" "fr"
[ 21.902] (**) Option "xkb_variant" "latin9"
[ 21.903] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event11)
[ 21.903] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev pointer catchall"
[ 21.903] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 21.903] (II) Using input driver 'evdev' for '2.4GHz 2way RF Receiver'
[ 21.903] (**) 2.4GHz 2way RF Receiver: always reports core events
[ 21.903] (**) evdev: 2.4GHz 2way RF Receiver: Device: "/dev/input/event11"
[ 21.903] (--) evdev: 2.4GHz 2way RF Receiver: Vendor 0x1bcf Product 0x5ce
[ 21.903] (--) evdev: 2.4GHz 2way RF Receiver: Found 12 mouse buttons
[ 21.903] (--) evdev: 2.4GHz 2way RF Receiver: Found scroll wheel(s)
[ 21.903] (--) evdev: 2.4GHz 2way RF Receiver: Found relative axes
[ 21.903] (--) evdev: 2.4GHz 2way RF Receiver: Found x and y relative axes
[ 21.903] (--) evdev: 2.4GHz 2way RF Receiver: Found absolute axes
[ 21.903] (II) evdev: 2.4GHz 2way RF Receiver: Forcing absolute x/y axes to exist.
[ 21.903] (--) evdev: 2.4GHz 2way RF Receiver: Found keys
[ 21.903] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as mouse
[ 21.903] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as keyboard
[ 21.903] (II) evdev: 2.4GHz 2way RF Receiver: Adding scrollwheel support
[ 21.903] (**) evdev: 2.4GHz 2way RF Receiver: YAxisMapping: buttons 4 and 5
[ 21.903] (**) evdev: 2.4GHz 2way RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.1/input/input11/event11"
[ 21.903] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: KEYBOARD, id 14)
[ 21.903] (**) Option "xkb_rules" "evdev"
[ 21.903] (**) Option "xkb_model" "evdev"
[ 21.903] (**) Option "xkb_layout" "fr"
[ 21.903] (**) Option "xkb_variant" "latin9"
[ 21.903] (II) evdev: 2.4GHz 2way RF Receiver: initialized for relative axes.
[ 21.903] (WW) evdev: 2.4GHz 2way RF Receiver: ignoring absolute axes.
[ 21.903] (**) 2.4GHz 2way RF Receiver: (accel) keeping acceleration scheme 1
[ 21.903] (**) 2.4GHz 2way RF Receiver: (accel) acceleration profile 0
[ 21.904] (**) 2.4GHz 2way RF Receiver: (accel) acceleration factor: 2.000
[ 21.904] (**) 2.4GHz 2way RF Receiver: (accel) acceleration threshold: 4
[ 21.904] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/mouse1)
[ 21.904] (II) No input driver specified, ignoring this device.
[ 21.904] (II) This device may have been added with another device file.
[ 21.904] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[ 21.904] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.904] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 21.904] (**) Asus WMI hotkeys: always reports core events
[ 21.904] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[ 21.904] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 21.904] (--) evdev: Asus WMI hotkeys: Found keys
[ 21.904] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 21.904] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event7"
[ 21.904] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 15)
[ 21.904] (**) Option "xkb_rules" "evdev"
[ 21.904] (**) Option "xkb_model" "evdev"
[ 21.904] (**) Option "xkb_layout" "fr"
[ 21.904] (**) Option "xkb_variant" "latin9"
[ 21.905] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 21.905] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.905] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.905] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.905] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 21.905] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.905] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.905] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.905] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[ 21.905] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 21.905] (**) Option "xkb_rules" "evdev"
[ 21.905] (**) Option "xkb_model" "evdev"
[ 21.905] (**) Option "xkb_layout" "fr"
[ 21.905] (**) Option "xkb_variant" "latin9"
[ 21.905] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[ 21.905] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 21.905] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 21.905] (II) LoadModule: "synaptics"
[ 21.905] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 21.989] (II) Module synaptics: vendor="X.Org Foundation"
[ 21.989] compiled for 1.12.1, module version = 1.6.1
[ 21.989] Module class: X.Org XInput Driver
[ 21.989] ABI class: X.Org XInput driver, version 16.0
[ 21.989] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 21.989] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 21.989] (**) Option "Device" "/dev/input/event8"
[ 21.989] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 21.989] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1152
[ 21.989] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 576
[ 21.989] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 21.989] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 21.989] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 21.989] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 21.989] (**) Option "VertEdgeScroll" "on"
[ 21.989] (**) Option "VertTwoFingerScroll" "on"
[ 21.989] (**) Option "TapButton1" "1"
[ 21.989] (**) Option "TapButton2" "2"
[ 21.989] (**) Option "TapButton3" "3"
[ 21.989] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 21.989] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 21.989] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[ 21.989] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 17)
[ 21.989] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 21.989] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 21.989] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.155
[ 21.990] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 21.990] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 21.990] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 21.990] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 21.990] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 21.990] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 21.990] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 21.990] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 21.990] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 21.990] (**) Option "Device" "/dev/input/mouse0"
[ 21.990] (EE) synaptics: ETPS/2 Elantech Touchpad: Synaptics driver unable to detect protocol
[ 21.990] (EE) PreInit returned 11 for "ETPS/2 Elantech Touchpad"
[ 21.990] (II) UnloadModule: "synaptics"
[ 21.991] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.991] (II) No input driver specified, ignoring this device.
[ 21.991] (II) This device may have been added with another device file.
[ 22.012] (II) intel(0): EDID vendor "CMO", prod id 5926
[ 22.012] (II) intel(0): Printing DDC gathered Modelines:
[ 22.012] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 27.558] (II) intel(0): EDID vendor "CMO", prod id 5926
[ 27.558] (II) intel(0): Printing DDC gathered Modelines:
[ 27.558] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 43.389] (II) intel(0): EDID vendor "CMO", prod id 5926
[ 43.389] (II) intel(0): Printing DDC gathered Modelines:
[ 43.389] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 45.265] (II) intel(0): EDID vendor "CMO", prod id 5926
[ 45.265] (II) intel(0): Printing DDC gathered Modelines:
[ 45.265] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 47.013] (II) intel(0): EDID vendor "CMO", prod id 5926
[ 47.013] (II) intel(0): Printing DDC gathered Modelines:
[ 47.013] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)Code : Tout sélectionner
#
# /etc/inittab
#
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 -s 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 -s 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 -s 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 -s 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 -s 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 -s 38400 tty6 linux
# Serial Virtual Console for KVM and others VMs
#s0:2345:respawn:/sbin/agetty -8 -s 9600 ttyS0 linux
# Hypervisor Virtual Console for Xen and KVM
#h0:2345:respawn:/sbin/agetty -8 -s 38400 hvc0 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >/dev/null 2>&1
# End of fileet enfin, voici mon rc.conf
Code : Tout sélectionner
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
HARDWARECLOCK="UTC"
TIMEZONE="Africa/Dakar"
KEYMAP="fr-pc"
CONSOLEFONT="lat9w-16"
CONSOLEMAP="8859-15"
LOCALE="fr_FR.utf-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
#
MODULES=(fuse)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="Pandora"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
#
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
#
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
#
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=192.168.1.15
netmask=255.255.255.0
broadcast=192.168.1.255
gateway=192.168.1.1
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
#
DAEMONS=(!hwclock syslog-ng @network dbus @wicd !netfs @crond @cupsd @bluetooth @bumblebeed @bbswitch)Mon système est à jour, j'use "pacman -Syu" et "yaourt -Syua" tous les deux jours.
Ma config matérielle est aussi dans ma signature, j'ai installé BBSWITCH et bumblebee, c'est fonctionnel.
par contre, j'ai tatonné à l'install entre les pilotes vidéo, je me demande si mon soucis ne viendrait pas de là...
Si vous voyez des trucs en trop ou mal boutiqués au passage, n'hésitez pas à commenter, critiquer, tout est bon !
et questions subsidiaires,
1. je cherche à optimiser la conso electrique de mon bouzin, et j'essaye d'ajouter cette option au démarrage de mon kernel, sans succès.
Code : Tout sélectionner
ro intel_idle.max_cstate=62. J'ai l'impression que mon lecteur BD/graveur DVD est HS. Savez vous comment le vérifier (ma machine n'a qu'un an, ça me parait un peu bizarre quand même...)
Pour ce bonus, dites moi s'il est préférable d'ouvrir un nouveau post, pas de soucis.
Merci d'avance pour le temps que vous allez consacrer à m'expliquer, notez bien que je suis loin d'être un cador, ça expliquera certainement les éventuelles bourdes... mais je ferais attention, promis !
. Ce n'est de toute façon pas un login manager très léger. 
