Je viens vous voir pour un souci avec mon scanner.
Jusqu'içi tout allé bien, j'avais installé iscan et iscan-data et je pouvais scanner.
Maintenant iscan ne trouve plus mon scanner.
La sortie de 'sane-find-scanner' (j'ai installé xsane en parallèle):
Code : Tout sélectionner
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
could not open USB device 0x1d6b/0x0002 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 008:001: Access denied (insufficient permissions)
found USB scanner (vendor=0x04b8 [EPSON], product=0x0895 [EPSON XP-102 103 Series]) at libusb:007:005
could not open USB device 0x1d6b/0x0001 at 007:001: Access denied (insufficient permissions)
could not open USB device 0x3938/0x1031 at 006:003: Access denied (insufficient permissions)
could not open USB device 0x0b38/0x0003 at 006:009: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x0c45/0x63f1 at 004:004: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x0a5c/0x5800 at 003:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x413c/0x8156 at 001:035: Access denied (insufficient permissions)
could not open USB device 0x413c/0x8158 at 001:034: Access denied (insufficient permissions)
could not open USB device 0x413c/0x8157 at 001:033: Access denied (insufficient permissions)
could not open USB device 0x0a5c/0x4500 at 001:032: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 001:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
Code : Tout sélectionner
Erreur d'ouverture de périphérie `epkowa:usb:007:005':
Argument invalide.