[IDE/SATA to USB] Disque non visible

[Inglebard]

Bonjour,

Je dispose d'un LogiLink au0006d IDE/SATA to USB. Je souhaiterais l'utiliser pour lire un disque SSD avec cet adaptateur.

Je précise que le disque est bon. Problème, lorsque je le branche impossible d'accéder aux données pourtant, ceci s’affiche dans les logs :

Code : Tout sélectionner

déc. 26 19:57:00 OpenDavid kernel: usb 3-1.3: new high-speed USB device number 7 using ehci-pci
déc. 26 19:57:00 OpenDavid kernel: usb 3-1.3: New USB device found, idVendor=152d, idProduct=2338, bcdDevice= 1.00
déc. 26 19:57:00 OpenDavid kernel: usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
déc. 26 19:57:00 OpenDavid kernel: usb 3-1.3: Product: USB to ATA/ATAPI bridge
déc. 26 19:57:00 OpenDavid kernel: usb 3-1.3: Manufacturer: JMicron
déc. 26 19:57:00 OpenDavid kernel: usb 3-1.3: SerialNumber: 161020406286
déc. 26 19:57:00 OpenDavid kernel: usb-storage 3-1.3:1.0: USB Mass Storage device detected
déc. 26 19:57:00 OpenDavid kernel: scsi host8: usb-storage 3-1.3:1.0
déc. 26 19:57:00 OpenDavid mtp-probe[4619]: checking bus 3, device 7: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3"
déc. 26 19:57:00 OpenDavid mtp-probe[4619]: bus: 3, device: 7 was not an MTP device
déc. 26 19:57:00 OpenDavid mtp-probe[4632]: checking bus 3, device 7: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3"
déc. 26 19:57:00 OpenDavid mtp-probe[4632]: bus: 3, device: 7 was not an MTP device
déc. 26 19:57:02 OpenDavid kernel: scsi 8:0:0:0: Direct-Access     SanDisk  SDSSDRC032G           PQ: 0 ANSI: 2 CCS
déc. 26 19:57:02 OpenDavid kernel: sd 8:0:0:0: Attached scsi generic sg13 type 0

Comment monter le disque alors qu'il ne s'affiche pas avec gparted/fdisk ?

[floflo77890]

donne la sortie de la commande lsusb avant d'avoir branché le disque puis après avoir branché le disque.

[Inglebard]

La sortie avant :

Code : Tout sélectionner

Bus 003 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 003 Device 004: ID 06f8:c000 Guillemot Corp. Hercules Muse Pocket
Bus 003 Device 003: ID 04f2:1060 Chicony Electronics Co., Ltd 
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 8087:07dc Intel Corp. 
Bus 001 Device 004: ID 05e3:0748 Genesys Logic, Inc. All-in-One Cardreader
Bus 001 Device 003: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

la sortie après :

Code : Tout sélectionner

Bus 003 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 003 Device 009: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
Bus 003 Device 004: ID 06f8:c000 Guillemot Corp. Hercules Muse Pocket
Bus 003 Device 003: ID 04f2:1060 Chicony Electronics Co., Ltd 
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 8087:07dc Intel Corp. 
Bus 001 Device 004: ID 05e3:0748 Genesys Logic, Inc. All-in-One Cardreader
Bus 001 Device 003: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[floflo77890]

Ok donc déjà le matériel est bien reconnu par la commande lsusb maintenant donne la sortie de hwinfo --usb et hwinfo --disk avec le disque de branché en USB.

[Inglebard]

hwinfo --usb

Code : Tout sélectionner

02: SCSI 700.2: 10600 Disk                                      
  [Created at block.256]
  Unique ID: TXVX.H5Y7Xj4OL0A
  SysFS ID: /class/block/sdk
  SysFS BusID: 7:0:0:2
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:2
  Hardware Class: disk
  Model: "Generic SM/xD-Picture"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "SM/xD-Picture"
  Revision: "1.02"
  Serial ID: "058F63626476"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdk (/dev/sg11)
  Device Files: /dev/sdk, /dev/disk/by-id/usb-Generic-_SM_xD-Picture_058F63626476-0:2, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:2
  Device Number: block 8:160-8:175 (char 21:11)
  Geometry (Logical): CHS 1024/0/62
  Speed: 480 Mbps
  Module Alias: "usb:v058Fp6362d0100dc00dsc00dp00ic08isc06ip50in00"
  Driver Info #0:
    Driver Status: uas is active
    Driver Activation Cmd: "modprobe uas"
  Driver Info #1:
    Driver Status: usb_storage is active
    Driver Activation Cmd: "modprobe usb_storage"
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown

03: SCSI 700.0: 10600 Disk
  [Created at block.256]
  Unique ID: 4Zlu.ESrhO6fmky3
  SysFS ID: /class/block/sdi
  SysFS BusID: 7:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:0
  Hardware Class: disk
  Model: "Generic SD/MMC"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "SD/MMC"
  Revision: "1.00"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdi (/dev/sg9)
  Device Files: /dev/sdi, /dev/disk/by-id/usb-Generic-_SD_MMC_058F63626476-0:0, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:0
  Device Number: block 8:128-8:143 (char 21:9)
  Geometry (Logical): CHS 1024/0/62
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown

06: SCSI 700.3: 10600 Disk
  [Created at block.256]
  Unique ID: R5W5.nxrNO6ILyX3
  SysFS ID: /class/block/sdl
  SysFS BusID: 7:0:0:3
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:3
  Hardware Class: disk
  Model: "Generic MS/MS-Pro"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "MS/MS-Pro"
  Revision: "1.03"
  Serial ID: "3"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdl (/dev/sg12)
  Device Files: /dev/sdl, /dev/disk/by-id/usb-Generic-_MS_MS-Pro_058F63626476-0:3, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:3
  Device Number: block 8:176-8:191 (char 21:12)
  Geometry (Logical): CHS 1024/0/62
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown

08: SCSI 700.1: 10600 Disk
  [Created at block.256]
  Unique ID: Xk+y.ESrhO6fmky3
  SysFS ID: /class/block/sdj
  SysFS BusID: 7:0:0:1
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:1
  Hardware Class: disk
  Model: "Generic Compact Flash"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "Compact Flash"
  Revision: "1.01"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdj (/dev/sg10)
  Device Files: /dev/sdj, /dev/disk/by-id/usb-Generic-_Compact_Flash_058F63626476-0:1, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:1
  Device Number: block 8:144-8:159 (char 21:10)
  Geometry (Logical): CHS 1024/0/62
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown

09: USB 00.0: 10600 Disk
  [Created at usb.122]
  Unique ID: _tiT.co4usX+CJN0
  Parent ID: KRJj.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0
  SysFS BusID: 3-1.3:1.0
  Hardware Class: disk
  Model: "JMicron Technology Corp. / JMicron JM20337 Hi-Speed USB to SATA & PATA Combo Bridge"
  Hotplug: USB
  Vendor: usb 0x152d "JMicron Technology Corp. / JMicron USA Technology Corp."
  Device: usb 0x2338 "JM20337 Hi-Speed USB to SATA & PATA Combo Bridge"
  Revision: "1.00"
  Serial ID: "161020406286"
  Driver: "usb-storage"
  Driver Modules: "usb_storage"
  Speed: 480 Mbps
  Module Alias: "usb:v152Dp2338d0100dc00dsc00dp00ic08isc06ip50in00"
  Driver Info #0:
    Driver Status: uas is active
    Driver Activation Cmd: "modprobe uas"
  Driver Info #1:
    Driver Status: usb_storage is active
    Driver Activation Cmd: "modprobe usb_storage"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Hub)

11: USB 00.3: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: wHrV.qxTa7tx0y55
  Parent ID: KRJj.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.3
  SysFS BusID: 3-1.2:1.3
  Hardware Class: unknown
  Model: "Guillemot Hercules Muse Pocket"
  Hotplug: USB
  Vendor: usb 0x06f8 "Guillemot Corp."
  Device: usb 0xc000 "Hercules Muse Pocket"
  Revision: "1.00"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/event7
  Device Files: /dev/input/event7, /dev/input/by-id/usb-06f8_USB_Audio-event-if03, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.3-event
  Device Number: char 13:71
  Speed: 12 Mbps
  Module Alias: "usb:v06F8pC000d0100dc00dsc00dp00ic03isc00ip00in03"
  Driver Info #0:
    Driver Status: usbhid is active
    Driver Activation Cmd: "modprobe usbhid"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Hub)

12: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: uIhY.oLWCeziExdF
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-0:1.0
  SysFS BusID: 3-0:1.0
  Hardware Class: hub
  Model: "Linux Foundation 2.0 root hub"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux Foundation"
  Device: usb 0x0002 "2.0 root hub"
  Revision: "4.19"
  Serial ID: "0000:00:1d.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0419dc09dsc00dp00ic09isc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

13: USB 00.1: 0401 Multimedia audio controller
  [Created at usb.122]
  Unique ID: 0xKN.P58yxE14Q+C
  Parent ID: KRJj.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.1
  SysFS BusID: 3-1.2:1.1
  Hardware Class: sound
  Model: "Guillemot Hercules Muse Pocket"
  Hotplug: USB
  Vendor: usb 0x06f8 "Guillemot Corp."
  Device: usb 0xc000 "Hercules Muse Pocket"
  Revision: "1.00"
  Driver: "snd-usb-audio"
  Driver Modules: "snd_usb_audio"
  Speed: 12 Mbps
  Module Alias: "usb:v06F8pC000d0100dc00dsc00dp00ic01isc02ip00in01"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Hub)

14: USB 00.0: 10503 USB Mouse
  [Created at usb.122]
  Unique ID: lfzD.SLU9A4yO9a0
  Parent ID: ADDn.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0
  SysFS BusID: 1-1.1:1.0
  Hardware Class: mouse
  Model: "Logitech M105 Optical Mouse"
  Hotplug: USB
  Vendor: usb 0x046d "Logitech, Inc."
  Device: usb 0xc077 "M105 Optical Mouse"
  Revision: "72.00"
  Compatible to: int 0x0210 0x0013
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-event-mouse, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-mouse
  Device Number: char 13:63 (char 13:32)
  Speed: 1.5 Mbps
  Module Alias: "usb:v046DpC077d7200dc00dsc00dp00ic03isc01ip02in00"
  Driver Info #0:
    Buttons: 3
    Wheels: 1
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #23 (Hub)

15: USB 00.0: 11500 Bluetooth Device
  [Created at usb.122]
  Unique ID: VBUu.cdUiY6836R9
  Parent ID: ADDn.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0
  SysFS BusID: 1-1.5:1.0
  Hardware Class: bluetooth
  Model: "Intel Bluetooth Device"
  Hotplug: USB
  Vendor: usb 0x8087 "Intel Corp."
  Device: usb 0x07dc 
  Revision: "0.01"
  Driver: "btusb"
  Driver Modules: "btusb"
  Speed: 12 Mbps
  Module Alias: "usb:v8087p07DCd0001dcE0dsc01dp01icE0isc01ip01in00"
  Driver Info #0:
    Driver Status: btusb is active
    Driver Activation Cmd: "modprobe btusb"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #23 (Hub)

16: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: KRJj.4Nx_qoDfSd7
  Parent ID: uIhY.oLWCeziExdF
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0
  SysFS BusID: 3-1:1.0
  Hardware Class: hub
  Model: "Intel Integrated Rate Matching Hub"
  Hotplug: USB
  Vendor: usb 0x8087 "Intel Corp."
  Device: usb 0x0024 "Integrated Rate Matching Hub"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #12 (Hub)

17: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: zPk0.TiQAvTU26X7
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:07:00.0/usb4/4-0:1.0
  SysFS BusID: 4-0:1.0
  Hardware Class: hub
  Model: "Linux Foundation 3.0 root hub"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux Foundation"
  Device: usb 0x0003 "3.0 root hub"
  Revision: "4.19"
  Serial ID: "0000:07:00.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Module Alias: "usb:v1D6Bp0003d0419dc09dsc00dp03ic09isc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

18: USB 00.0: 10800 Keyboard
  [Created at usb.122]
  Unique ID: 7dS8.T9ud1EpLUl8
  Parent ID: KRJj.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.0
  SysFS BusID: 3-1.1:1.0
  Hardware Class: keyboard
  Model: "Chicony Electronics USB Keyboard"
  Hotplug: USB
  Vendor: usb 0x04f2 "Chicony Electronics Co., Ltd"
  Device: usb 0x1060 "USB Keyboard"
  Revision: "14.00"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/event3
  Device Files: /dev/input/event3, /dev/input/by-id/usb-CHICONY_USB_Keyboard-event-kbd, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-event-kbd
  Device Number: char 13:67
  Speed: 1.5 Mbps
  Module Alias: "usb:v04F2p1060d1400dc00dsc00dp00ic03isc01ip01in00"
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Hub)

19: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: k4bc.FHd55n4xKo7
  SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0
  SysFS BusID: 1-0:1.0
  Hardware Class: hub
  Model: "Linux Foundation 2.0 root hub"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux Foundation"
  Device: usb 0x0002 "2.0 root hub"
  Revision: "4.19"
  Serial ID: "0000:00:1a.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0419dc09dsc00dp00ic09isc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

23: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: ADDn.4Nx_qoDfSd7
  Parent ID: k4bc.FHd55n4xKo7
  SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0
  SysFS BusID: 1-1:1.0
  Hardware Class: hub
  Model: "Intel Integrated Rate Matching Hub"
  Hotplug: USB
  Vendor: usb 0x8087 "Intel Corp."
  Device: usb 0x0024 "Integrated Rate Matching Hub"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (Hub)

24: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: pBe4.aMIzSWiMAJE
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:07:00.0/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux Foundation 2.0 root hub"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux Foundation"
  Device: usb 0x0002 "2.0 root hub"
  Revision: "4.19"
  Serial ID: "0000:07:00.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0419dc09dsc00dp01ic09isc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

25: USB 00.1: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: aoiC.CGznOmcxOo2
  Parent ID: KRJj.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.1
  SysFS BusID: 3-1.1:1.1
  Hardware Class: unknown
  Model: "Chicony Electronics USB Keyboard"
  Hotplug: USB
  Vendor: usb 0x04f2 "Chicony Electronics Co., Ltd"
  Device: usb 0x1060 "USB Keyboard"
  Revision: "14.00"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/event5
  Device Number: char 13:69
  Speed: 1.5 Mbps
  Module Alias: "usb:v04F2p1060d1400dc00dsc00dp00ic03isc00ip00in01"
  Driver Info #0:
    Driver Status: usbhid is active
    Driver Activation Cmd: "modprobe usbhid"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Hub)

hwinfo --disk

Code : Tout sélectionner

24: IDE 100.0: 10600 Disk                                       
  [Created at block.245]
  Unique ID: WZeP.v2txYJ3dMs7
  Parent ID: w7Y8.GoXtMN5D3WB
  SysFS ID: /class/block/sdb
  SysFS BusID: 1:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0
  Hardware Class: disk
  Model: "WDC WD5003AZEX-0"
  Vendor: "WDC"
  Device: "WD5003AZEX-0"
  Revision: "1A01"
  Serial ID: "WD-WCC3FJFLCJ94"
  Driver: "ahci", "sd"
  Driver Modules: "ahci", "sd_mod"
  Device File: /dev/sdb
  Device Files: /dev/sdb, /dev/disk/by-id/ata-WDC_WD5003AZEX-00MK2A0_WD-WCC3FJFLCJ94, /dev/disk/by-id/wwn-0x50014ee2602f4b9f, /dev/disk/by-path/pci-0000:00:1f.2-ata-2
  Device Number: block 8:16-8:31
  Geometry (Logical): CHS 60801/255/63
  Size: 976773168 sectors a 512 bytes
  Capacity: 465 GB (500107862016 bytes)
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #2 (SATA controller)

25: SCSI 700.2: 10600 Disk
  [Created at block.256]
  Unique ID: TXVX.H5Y7Xj4OL0A
  Parent ID: 1GTX.xDXO3c5YYa9
  SysFS ID: /class/block/sdk
  SysFS BusID: 7:0:0:2
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:2
  Hardware Class: disk
  Model: "Generic SM/xD-Picture"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "SM/xD-Picture"
  Revision: "1.02"
  Serial ID: "058F63626476"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdk (/dev/sg11)
  Device Files: /dev/sdk, /dev/disk/by-id/usb-Generic-_SM_xD-Picture_058F63626476-0:2, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:2
  Device Number: block 8:160-8:175 (char 21:11)
  Geometry (Logical): CHS 1024/0/62
  Speed: 480 Mbps
  Module Alias: "usb:v058Fp6362d0100dc00dsc00dp00ic08isc06ip50in00"
  Driver Info #0:
    Driver Status: uas is active
    Driver Activation Cmd: "modprobe uas"
  Driver Info #1:
    Driver Status: usb_storage is active
    Driver Activation Cmd: "modprobe usb_storage"
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

26: SCSI 700.0: 10600 Disk
  [Created at block.256]
  Unique ID: 4Zlu.ESrhO6fmky3
  Parent ID: 1GTX.xDXO3c5YYa9
  SysFS ID: /class/block/sdi
  SysFS BusID: 7:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:0
  Hardware Class: disk
  Model: "Generic SD/MMC"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "SD/MMC"
  Revision: "1.00"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdi (/dev/sg9)
  Device Files: /dev/sdi, /dev/disk/by-id/usb-Generic-_SD_MMC_058F63626476-0:0, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:0
  Device Number: block 8:128-8:143 (char 21:9)
  Geometry (Logical): CHS 1024/0/62
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

28: IDE 500.0: 10600 Disk
  [Created at block.245]
  Unique ID: _kuT.gn6mAvRlV59
  Parent ID: w7Y8.GoXtMN5D3WB
  SysFS ID: /class/block/sdc
  SysFS BusID: 5:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata6/host5/target5:0:0/5:0:0:0
  Hardware Class: disk
  Model: "Hitachi HDS72101"
  Vendor: "Hitachi"
  Device: "HDS72101"
  Revision: "A41A"
  Serial ID: "JP2940J81P9SKD"
  Driver: "ahci", "sd"
  Driver Modules: "ahci", "sd_mod"
  Device File: /dev/sdc
  Device Files: /dev/sdc, /dev/disk/by-id/ata-Hitachi_HDS721010CLA632_JP2940J81P9SKD, /dev/disk/by-id/wwn-0x5000cca396d7c7ef, /dev/disk/by-path/pci-0000:00:1f.2-ata-6
  Device Number: block 8:32-8:47
  Geometry (Logical): CHS 121601/255/63
  Size: 1953525168 sectors a 512 bytes
  Capacity: 931 GB (1000204886016 bytes)
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #2 (SATA controller)

29: SCSI 700.3: 10600 Disk
  [Created at block.256]
  Unique ID: R5W5.nxrNO6ILyX3
  Parent ID: 1GTX.xDXO3c5YYa9
  SysFS ID: /class/block/sdl
  SysFS BusID: 7:0:0:3
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:3
  Hardware Class: disk
  Model: "Generic MS/MS-Pro"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "MS/MS-Pro"
  Revision: "1.03"
  Serial ID: "3"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdl (/dev/sg12)
  Device Files: /dev/sdl, /dev/disk/by-id/usb-Generic-_MS_MS-Pro_058F63626476-0:3, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:3
  Device Number: block 8:176-8:191 (char 21:12)
  Geometry (Logical): CHS 1024/0/62
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

30: IDE 00.0: 10600 Disk
  [Created at block.245]
  Unique ID: 3OOL.vb0FNw_4kU7
  Parent ID: w7Y8.GoXtMN5D3WB
  SysFS ID: /class/block/sda
  SysFS BusID: 0:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0
  Hardware Class: disk
  Model: "Samsung SSD 860"
  Vendor: "Samsung"
  Device: "SSD 860"
  Revision: "1B6Q"
  Serial ID: "S3Z2NB0KA80445A"
  Driver: "ahci", "sd"
  Driver Modules: "ahci", "sd_mod"
  Device File: /dev/sda
  Device Files: /dev/sda, /dev/disk/by-id/ata-Samsung_SSD_860_EVO_500GB_S3Z2NB0KA80445A, /dev/disk/by-id/wwn-0x5002538e4084ee3c, /dev/disk/by-path/pci-0000:00:1f.2-ata-1
  Device Number: block 8:0-8:15
  Geometry (Logical): CHS 60801/255/63
  Size: 976773168 sectors a 512 bytes
  Capacity: 465 GB (500107862016 bytes)
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #2 (SATA controller)

31: SCSI 700.1: 10600 Disk
  [Created at block.256]
  Unique ID: Xk+y.ESrhO6fmky3
  Parent ID: 1GTX.xDXO3c5YYa9
  SysFS ID: /class/block/sdj
  SysFS BusID: 7:0:0:1
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/host7/target7:0:0/7:0:0:1
  Hardware Class: disk
  Model: "Generic Compact Flash"
  Vendor: usb 0x058f "Generic-"
  Device: usb 0x6362 "Compact Flash"
  Revision: "1.01"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage", "sd_mod"
  Device File: /dev/sdj (/dev/sg10)
  Device Files: /dev/sdj, /dev/disk/by-id/usb-Generic-_Compact_Flash_058F63626476-0:1, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-scsi-0:0:0:1
  Device Number: block 8:144-8:159 (char 21:10)
  Geometry (Logical): CHS 1024/0/62
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

32: USB 00.0: 10600 Disk
  [Created at usb.122]
  Unique ID: _tiT.co4usX+CJN0
  Parent ID: KRJj.4Nx_qoDfSd7
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0
  SysFS BusID: 3-1.3:1.0
  Hardware Class: disk
  Model: "JMicron Technology Corp. / JMicron JM20337 Hi-Speed USB to SATA & PATA Combo Bridge"
  Hotplug: USB
  Vendor: usb 0x152d "JMicron Technology Corp. / JMicron USA Technology Corp."
  Device: usb 0x2338 "JM20337 Hi-Speed USB to SATA & PATA Combo Bridge"
  Revision: "1.00"
  Serial ID: "161020406286"
  Driver: "usb-storage"
  Driver Modules: "usb_storage"
  Speed: 480 Mbps
  Module Alias: "usb:v152Dp2338d0100dc00dsc00dp00ic08isc06ip50in00"
  Driver Info #0:
    Driver Status: uas is active
    Driver Activation Cmd: "modprobe uas"
  Driver Info #1:
    Driver Status: usb_storage is active
    Driver Activation Cmd: "modprobe usb_storage"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #39 (Hub)

[floflo77890]

ont vois bien le JMicron technology qui est surement le matériel que tu parles mais on ne voie pas de capacité de disque de branché comme si le ssd était éteint. A moins que le SSD est le samsung tu as selement ce ssd dans ton PC ?

[Inglebard]

Non, c'est un sandisk. On le voit bien dans mon premier post. Après il apparait nul part.

[benjarobin]

Bonjour, bloc sous alimenté ou ssd mal branché ?

[Inglebard]

Bonjour, bloc sous alimenté ou ssd mal branché ?

Non j'ai bien vérifier tout est branché correctement. Par contre étrangement, en essayant plusieurs fois de suite, il est monté 1 fois.

Du coup, je viens de re-regarder dans les logs, je vois ceci quelques secondes après avoir branché mon adaptateur et le disque lorsque ça ne fonctionne pas :

Code : Tout sélectionner

déc. 27 18:39:38 OpenDavid kernel: scsi 7:0:0:0: Direct-Access     SanDisk  SDSSDRC032G           PQ: 0 ANSI: 2 CCS
déc. 27 18:39:38 OpenDavid kernel: sd 7:0:0:0: Attached scsi generic sg8 type 0
déc. 27 18:40:12 OpenDavid kernel: not responding...
déc. 27 18:40:28 OpenDavid kernel: sd 7:0:0:0: [sdh] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 27 18:40:28 OpenDavid kernel: sd 7:0:0:0: [sdh] Sense Key : Unit Attention [current] 
déc. 27 18:40:28 OpenDavid kernel: sd 7:0:0:0: [sdh] Add. Sense: Not ready to ready change, medium may have changed
déc. 27 18:40:28 OpenDavid kernel: sd 7:0:0:0: [sdh] 0 512-byte logical blocks: (0 B/0 B)
déc. 27 18:40:28 OpenDavid kernel: sd 7:0:0:0: [sdh] 0-byte physical blocks
déc. 27 18:41:32 OpenDavid kernel: sd 7:0:0:0: [sdh] Asking for cache data failed
déc. 27 18:41:32 OpenDavid kernel: sd 7:0:0:0: [sdh] Assuming drive cache: write through

Lorsque ça fonctionne :

Code : Tout sélectionner

déc. 27 18:37:28 OpenDavid kernel: scsi 7:0:0:0: Direct-Access     SanDisk  SDSSDRC032G           PQ: 0 ANSI: 2 CCS
déc. 27 18:37:28 OpenDavid kernel: sd 7:0:0:0: Attached scsi generic sg8 type 0
déc. 27 18:37:28 OpenDavid kernel: sd 7:0:0:0: [sdh] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
déc. 27 18:37:28 OpenDavid kernel: sd 7:0:0:0: [sdh] Write Protect is off
déc. 27 18:37:28 OpenDavid kernel: sd 7:0:0:0: [sdh] Mode Sense: 28 00 00 00
déc. 27 18:37:28 OpenDavid kernel: sd 7:0:0:0: [sdh] No Caching mode page found
déc. 27 18:37:28 OpenDavid kernel: sd 7:0:0:0: [sdh] Assuming drive cache: write through
déc. 27 18:37:28 OpenDavid kernel:  sdh: sdh1
déc. 27 18:37:28 OpenDavid kernel: sd 7:0:0:0: [sdh] Attached SCSI disk

[floflo77890]

N'y aurais t'il pas une mauvaise connexion au niveau du IDE to SATA. Peux tu essayer de brancher le convertisseur et le disque sur un système windows voir si le problème existe. Je me retourne vers la réponse de benjarobin qu'il me corrige si je me trompe mais les sorties des commandes nous informes que le convertisseur est bien reconnu par le système mais pas le SSD en tout cas une foid tous les X temps. IL serait intéressant de voir si ce phénomène ce produit sur d'autre systèmes. Si tel est le cas pour moi le problème viens sois du SSD sois de la connexion entre le SSD et le IDE to SATA.

Et si tu as la possibilité de tester le convertisseur avec un autre disque (ssd ou hdd) peut importe ont sera vite fixés.