je me remet à la TNT avec une Terratec Cinergy Hybrid Stick.
j'installe v4l-dvb-git et autre paquet en référence à du dvb.
la clé Tuner est bien répertoriée dans la doc:
http://linuxtv.org/wiki/index.php/DVB-T ... vices/Full
Code : Tout sélectionner
Terratec Cinergy Hybrid Stick
Supported: ✔ Yes, in kernel since 2.6.35
USB ID: 0ccd:00a5
Tuner: xc3028L
Demodulator: ZL10353
USB Bridge: TM6010
firwmare: xc3028L-v36.fwtélécharger le fichier: http://steventoth.net/linux/hvr1400/xc3028L-v36.fw et le mettre dans le dossier /lib/firwmare.
je lance le module tm6000-dvb ainsi que tuner_xc2028
j'ai en retour dans dmesg:
Code : Tout sélectionner
[ 1913.358496] usb 1-5: USB disconnect, device number 4
[ 1913.358556] tm6000: disconnecting tm6000 #0
[ 1913.413333] xc2028 8-0061: destroying instance
[ 1917.623182] usb 1-6: new high speed USB device number 5 using ehci_hcd
[ 1917.758716] tm6000: alt 0, interface 0, class 255
[ 1917.758719] tm6000: alt 0, interface 0, class 255
[ 1917.758721] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[ 1917.758722] tm6000: alt 0, interface 0, class 255
[ 1917.758724] tm6000: alt 1, interface 0, class 255
[ 1917.758725] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[ 1917.758727] tm6000: alt 1, interface 0, class 255
[ 1917.758728] tm6000: alt 1, interface 0, class 255
[ 1917.758730] tm6000: INT IN endpoint: 0x83 (max size=4 bytes)
[ 1917.758731] tm6000: alt 2, interface 0, class 255
[ 1917.758733] tm6000: alt 2, interface 0, class 255
[ 1917.758734] tm6000: alt 2, interface 0, class 255
[ 1917.758736] tm6000: alt 3, interface 0, class 255
[ 1917.758737] tm6000: alt 3, interface 0, class 255
[ 1917.758738] tm6000: alt 3, interface 0, class 255
[ 1917.758740] tm6000: New video device @ 480 Mbps (0ccd:00a5, ifnum 0)
[ 1917.758741] tm6000: Found Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
[ 1917.766513] Found tm6010
[ 1918.959837] tm6000 #0: i2c eeprom 00: 42 59 54 45 12 01 00 02 00 00 00 40 cd 0c a5 00 BYTE.......@....
[ 1919.119841] tm6000 #0: i2c eeprom 10: 01 00 10 20 40 01 02 03 48 79 62 72 69 64 2d 55 ... @...Hybrid-U
[ 1919.279838] tm6000 #0: i2c eeprom 20: 53 42 ff ff ff ff ff ff ff ff ff ff ff ff ff ff SB..............
[ 1919.439841] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1919.599845] tm6000 #0: i2c eeprom 40: 2a 00 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 *.C.i.n.e.r.g.y.
[ 1919.759845] tm6000 #0: i2c eeprom 50: 20 00 48 00 79 00 62 00 72 00 69 00 64 00 2d 00 .H.y.b.r.i.d.-.
[ 1919.919826] tm6000 #0: i2c eeprom 60: 53 00 74 00 69 00 63 00 6b 00 01 ff ff ff ff ff S.t.i.c.k.......
[ 1920.079838] tm6000 #0: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1920.239835] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1920.399844] tm6000 #0: i2c eeprom 90: ff ff ff ff 1a 03 30 00 30 00 30 00 38 00 43 00 ......0.0.0.8.C.
[ 1920.559846] tm6000 #0: i2c eeprom a0: 41 00 31 00 32 00 33 00 34 00 35 00 36 00 ff ff A.1.2.3.4.5.6...
[ 1920.719838] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1920.879828] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1921.039829] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1921.199833] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1921.359828] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 1921.520917] tuner 8-0061: Tuner -1 found with type(s) Radio TV.
[ 1921.520928] xc2028 8-0061: creating new instance
[ 1921.520930] xc2028 8-0061: type set to XCeive xc2028/xc3028 tuner
[ 1921.520932] Setting firmware parameters for xc2028
[ 1921.522241] xc2028 8-0061: Loading 81 firmware images from xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
[ 1921.759833] xc2028 8-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 1961.809830] xc2028 8-0061: Loading firmware for type=(0), id 000000000000b700.
[ 1962.580082] SCODE (20000000), id 000000000000b700:
[ 1962.580267] xc2028 8-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 1963.290043] tm6000 #0: registered device video0
[ 1963.290098] tm6000 #0: registered device radio0
[ 1963.290099] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[ 1963.403217] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 1963.403354] input: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:0b.1/usb1/1-6/rc/rc1/input7
[ 1963.403492] rc1: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:0b.1/usb1/1-6/rc/rc1
[ 1965.269835] xc2028 8-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 2010.803155] xc2028 8-0061: Loading firmware for type=FM (400), id 0000000000000000.
[ 2012.113215] not ready
[ 2012.426490] xc2028 8-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2063.093142] xc2028 8-0061: Loading firmware for type=(0), id 000000000000b700.
[ 2064.123144] SCODE (20000000), id 000000000000b700:
[ 2064.123154] xc2028 8-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 2066.127160] not ready
[ 2066.128001] not ready
[ 2408.420249] usbcore: registered new interface driver em28xx
[ 2408.420252] em28xx driver loaded
[ 7059.062441] usb 1-6: USB disconnect, device number 5
[ 7059.062505] tm6000: disconnecting tm6000 #0
[ 7059.122786] xc2028 8-0061: destroying instance
[ 7062.589317] usb 1-5: new high speed USB device number 6 using ehci_hcd
[ 7062.724698] tm6000: alt 0, interface 0, class 255
[ 7062.724701] tm6000: alt 0, interface 0, class 255
[ 7062.724702] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[ 7062.724704] tm6000: alt 0, interface 0, class 255
[ 7062.724705] tm6000: alt 1, interface 0, class 255
[ 7062.724707] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[ 7062.724708] tm6000: alt 1, interface 0, class 255
[ 7062.724710] tm6000: alt 1, interface 0, class 255
[ 7062.724711] tm6000: INT IN endpoint: 0x83 (max size=4 bytes)
[ 7062.724713] tm6000: alt 2, interface 0, class 255
[ 7062.724714] tm6000: alt 2, interface 0, class 255
[ 7062.724716] tm6000: alt 2, interface 0, class 255
[ 7062.724717] tm6000: alt 3, interface 0, class 255
[ 7062.724718] tm6000: alt 3, interface 0, class 255
[ 7062.724720] tm6000: alt 3, interface 0, class 255
[ 7062.724721] tm6000: New video device @ 480 Mbps (0ccd:00a5, ifnum 0)
[ 7062.724723] tm6000: Found Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
[ 7062.732667] Found tm6010
[ 7063.925983] tm6000 #0: i2c eeprom 00: 42 59 54 45 12 01 00 02 00 00 00 40 cd 0c a5 00 BYTE.......@....
[ 7064.085981] tm6000 #0: i2c eeprom 10: 01 00 10 20 40 01 02 03 48 79 62 72 69 64 2d 55 ... @...Hybrid-U
[ 7064.245978] tm6000 #0: i2c eeprom 20: 53 42 ff ff ff ff ff ff ff ff ff ff ff ff ff ff SB..............
[ 7064.405987] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7064.572649] tm6000 #0: i2c eeprom 40: 2a 00 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 *.C.i.n.e.r.g.y.
[ 7064.732648] tm6000 #0: i2c eeprom 50: 20 00 48 00 79 00 62 00 72 00 69 00 64 00 2d 00 .H.y.b.r.i.d.-.
[ 7064.892638] tm6000 #0: i2c eeprom 60: 53 00 74 00 69 00 63 00 6b 00 01 ff ff ff ff ff S.t.i.c.k.......
[ 7065.052641] tm6000 #0: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7065.212647] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7065.372646] tm6000 #0: i2c eeprom 90: ff ff ff ff 1a 03 30 00 30 00 30 00 38 00 43 00 ......0.0.0.8.C.
[ 7065.536009] tm6000 #0: i2c eeprom a0: 41 00 31 00 32 00 33 00 34 00 35 00 36 00 ff ff A.1.2.3.4.5.6...
[ 7065.695985] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7065.855986] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7066.016000] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7066.179312] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7066.339319] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 7066.500438] tuner 8-0061: Tuner -1 found with type(s) Radio TV.
[ 7066.500451] xc2028 8-0061: creating new instance
[ 7066.500453] xc2028 8-0061: type set to XCeive xc2028/xc3028 tuner
[ 7066.500454] Setting firmware parameters for xc2028
[ 7066.502250] xc2028 8-0061: Loading 81 firmware images from xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
[ 7066.742642] xc2028 8-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 7107.102667] xc2028 8-0061: Loading firmware for type=(0), id 000000000000b700.
[ 7107.872645] SCODE (20000000), id 000000000000b700:
[ 7107.872652] xc2028 8-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 7108.582760] tm6000 #0: registered device video0
[ 7108.582791] tm6000 #0: registered device radio0
[ 7108.582792] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[ 7108.696043] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 7108.696222] input: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:0b.1/usb1/1-5/rc/rc2/input8
[ 7108.696307] rc2: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:0b.1/usb1/1-5/rc/rc2
[ 7112.095989] xc2028 8-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 7151.716038] xc2028 8-0061: Loading firmware for type=FM (400), id 0000000000000000.
[ 7152.726038] not ready
[ 7153.286562] not ready
[ 7153.286913] not readyje ne vois pas trop quoi faire de plus pour avoir la TNT.
