[Archiso] install: cannot stat '/home/marc/Documents/archiso/working/x86_64/airootfs/boot/initramfs-*.img': No such fil

Applications, problèmes de configuration réseau
Avatar de l’utilisateur
PowaBanga
archer
Messages : 101
Inscription : mar. 12 sept. 2017, 21:15

[Archiso] install: cannot stat '/home/marc/Documents/archiso/working/x86_64/airootfs/boot/initramfs-*.img': No such fil

Message par PowaBanga »

Bonjour à tous,

J'ai donc copié le contenu de /usr/share/archiso/releng dans le dossier ~/Documents/archiso/config, j'ai ajouté un ou deux fichier dans ~/Documents/archiso/config/airootfs/ et j'ai lancé la commande suivante :

Code : Tout sélectionner

cd ~/Document/archisio
sudo mkarchiso -v -w $PWD/working/ -o $PWD $PWD/config/
[mkarchiso] INFO: mkarchiso configuration settings
[mkarchiso] INFO:              Architecture:   x86_64
[mkarchiso] INFO:         Working directory:   /home/marc/Documents/archiso/working
[mkarchiso] INFO:    Installation directory:   arch
[mkarchiso] INFO:          Output directory:   /home/marc/Documents/archiso
[mkarchiso] INFO:                   GPG key:   None
[mkarchiso] INFO:                   Profile:   /home/marc/Documents/archiso/config
[mkarchiso] INFO: Pacman configuration file:   /home/marc/Documents/archiso/config/pacman.conf
[mkarchiso] INFO:           Image file name:   archlinux-2020.10.03-x86_64.iso
[mkarchiso] INFO:          ISO volume label:   ARCH_202010
[mkarchiso] INFO:             ISO publisher:   Arch Linux <https://www.archlinux.org>
[mkarchiso] INFO:           ISO application:   Arch Linux Live/Rescue CD
[mkarchiso] INFO:                Boot modes:   bios.syslinux.mbr bios.syslinux.eltorito uefi-x64.systemd-boot.esp uefi-x64.systemd-boot.eltorito
[mkarchiso] INFO:                  Packages:   amd-ucode arch-install-scripts b43-fwcutter base bind-tools broadcom-wl btrfs-progs clonezilla crda darkhttpd ddrescue dhclient dhcpcd diffutils dmraid dnsmasq dosfstools edk2-shell efibootmgr ethtool exfatprogs f2fs-tools fsarchiver gnu-netcat gpm gptfdisk grml-zsh-config haveged hdparm intel-ucode ipw2100-fw ipw2200-fw irssi iwd jfsutils kitty-terminfo lftp linux linux-atm linux-firmware lsscsi lvm2 lynx man-db man-pages mc mdadm memtest86+ mkinitcpio mkinitcpio-archiso mkinitcpio-nfs-utils mtools nano nbd ndisc6 nfs-utils nilfs-utils nmap ntfs-3g nvme-cli openconnect openssh openvpn partclone parted partimage ppp pptpclient reflector reiserfsprogs rp-pppoe rsync rxvt-unicode-terminfo sdparm sg3_utils smartmontools sudo syslinux systemd-resolvconf tcpdump terminus-font termite-terminfo testdisk usb_modeswitch usbutils vim vpnc wireless-regdb wireless_tools wpa_supplicant wvdial xfsprogs xl2tpd zsh

[mkarchiso] INFO: Copying custom custom airootfs files and setting up user home directories...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Installing packages to '/home/marc/Documents/archiso/working/x86_64/airootfs/'...
==> Creating install root at /home/marc/Documents/archiso/working/x86_64/airootfs
==> Installing packages to /home/marc/Documents/archiso/working/x86_64/airootfs
:: Synchronizing package databases...
 core                  130.8 KiB   743 KiB/s 00:00 [----------------------] 100%
 extra                1654.0 KiB  1504 KiB/s 00:01 [----------------------] 100%
 community               5.2 MiB  3.40 MiB/s 00:02 [----------------------] 100%
 multilib              157.4 KiB  4.16 MiB/s 00:00 [----------------------] 100%
resolving
[...]

[...]
(278/279) installing xfsprogs                      [----------------------] 100%
Optional dependencies for xfsprogs
    python: for xfs_scrub_all script [installed]
    smtp-forwarder: for xfs_scrub_fail script
(279/279) installing xl2tpd                        [----------------------] 100%
:: Running post-transaction hooks...
( 1/14) Creating system user accounts...
Creating group avahi with gid 977.
Creating user avahi (Avahi mDNS/DNS-SD daemon) with uid 977 and gid 977.
Creating group named with gid 40.
Creating user named (BIND DNS Server) with uid 40 and gid 40.
Creating group dhcpcd with gid 976.
Creating user dhcpcd (dhcpcd privilege separation) with uid 976 and gid 976.
Creating group dnsmasq with gid 975.
Creating user dnsmasq (dnsmasq daemon) with uid 975 and gid 975.
Creating group nbd with gid 974.
Creating user nbd (Network Block Device) with uid 974 and gid 974.
Creating group partimag with gid 110.
Creating user partimag (Partimage user) with uid 110 and gid 110.
Creating group rpc with gid 32.
Creating user rpc (Rpcbind Daemon) with uid 32 and gid 32.
( 2/14) Updating journal message catalog...
( 3/14) Reloading system manager configuration...
Running in chroot, ignoring command 'daemon-reload'
( 4/14) Updating udev hardware database...
( 5/14) Applying kernel sysctl settings...
Not setting net/ipv4/conf/all/rp_filter (explicit setting exists).
Not setting net/ipv4/conf/default/rp_filter (explicit setting exists).
Not setting net/ipv4/conf/all/accept_source_route (explicit setting exists).
Not setting net/ipv4/conf/default/accept_source_route (explicit setting exists).
Not setting net/ipv4/conf/all/promote_secondaries (explicit setting exists).
Not setting net/ipv4/conf/default/promote_secondaries (explicit setting exists).
( 6/14) Creating temporary files...
Failed to open file "/sys/devices/system/cpu/microcode/reload": Read-only file system
error: command failed to execute correctly
( 7/14) Reloading device manager configuration...
Running in chroot, ignoring request.
( 8/14) Arming ConditionNeedsUpdate...
( 9/14) Rebuilding certificate stores...
(10/14) Updating module dependencies...
(11/14) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'archiso'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/archiso.img
==> Starting build: 5.8.13-arch1-1
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [memdisk]
  -> Running build hook: [archiso_shutdown]
  -> Running build hook: [archiso]
  -> Running build hook: [archiso_loop_mnt]
  -> Running build hook: [archiso_pxe_common]
==> WARNING: Possibly missing firmware for module: softing_cs
==> WARNING: Possibly missing firmware for module: lantiq_gswip
  -> Running build hook: [archiso_pxe_nbd]
  -> Running build hook: [archiso_pxe_http]
  -> Running build hook: [archiso_pxe_nfs]
  -> Running build hook: [archiso_kms]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: xhci_pci
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
==> Generating module dependencies
==> Creating xz-compressed initcpio image: /boot/archiso.img
==> Image generation successful
(12/14) Reloading system bus configuration...
Running in chroot, ignoring command 'try-reload-or-restart'
(13/14) Warn about old perl modules
(14/14) Updating the info directory file...
[mkarchiso] INFO: Done! Packages installed successfully.
[mkarchiso] INFO: Copying /etc/skel/* to user homes...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Running customize_airootfs.sh in '/home/marc/Documents/archiso/working/x86_64/airootfs' chroot...
[mkarchiso] WARNING: customize_airootfs.sh is deprecated! Support for it will be removed in a future archiso version.
==> WARNING: /home/marc/Documents/archiso/working/x86_64/airootfs is not a mountpoint. This may have undesirable side effects.
Generating locales...
  en_US.UTF-8... done
Generation complete.
[mkarchiso] INFO: Done! customize_airootfs.sh run successfully.
[mkarchiso] INFO: Creating a list of installed packages on live-enviroment...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Setting up SYSLINUX for BIOS booting from a disk...
[mkarchiso] INFO: Preparing kernel and intramfs for the ISO 9660 file system...
install: cannot stat '/home/marc/Documents/archiso/working/x86_64/airootfs/boot/initramfs-*.img': No such file or directory
À la fin l'iso n'est pas générée... :(
Quelqu'un saurait-il m'aider à comprendre comment cela se fait svp ?

[édit]
J'ai finalement suprimé mes dossier de config et working, pour recommencer après avoir désinstallé/réinstallé archiso , j'ai recréé le dossier "c" pour config (avec la config de base) et "w" pour working...

je me retrouve finalement avec cette erreure :

Code : Tout sélectionner

sudo mkarchiso -v -w $PWD/w -o $PWD $PWD/c
[mkarchiso] INFO: mkarchiso configuration settings
[mkarchiso] INFO:              Architecture:   x86_64
[mkarchiso] INFO:         Working directory:   /home/marc/Documents/archiso/w
[mkarchiso] INFO:    Installation directory:   arch
[mkarchiso] INFO:          Output directory:   /home/marc/Documents/archiso
[mkarchiso] INFO:                   GPG key:   None
[mkarchiso] INFO:                   Profile:   /home/marc/Documents/archiso/c
[mkarchiso] INFO: Pacman configuration file:   /home/marc/Documents/archiso/c/pacman.conf
[mkarchiso] INFO:           Image file name:   archlinux-2020.10.03-x86_64.iso
[mkarchiso] INFO:          ISO volume label:   ARCH_202010
[mkarchiso] INFO:             ISO publisher:   Arch Linux <https://www.archlinux.org>
[mkarchiso] INFO:           ISO application:   Arch Linux Live/Rescue CD
[mkarchiso] INFO:                Boot modes:   bios.syslinux.mbr bios.syslinux.eltorito uefi-x64.systemd-boot.esp uefi-x64.systemd-boot.eltorito
[mkarchiso] INFO:                  Packages:   amd-ucode arch-install-scripts b43-fwcutter base bind-tools broadcom-wl btrfs-progs clonezilla crda darkhttpd ddrescue dhclient dhcpcd diffutils dmraid dnsmasq dosfstools edk2-shell efibootmgr ethtool exfatprogs f2fs-tools fsarchiver gnu-netcat gpm gptfdisk grml-zsh-config haveged hdparm intel-ucode ipw2100-fw ipw2200-fw irssi iwd jfsutils kitty-terminfo lftp linux linux-atm linux-firmware lsscsi lvm2 lynx man-db man-pages mc mdadm memtest86+ mkinitcpio mkinitcpio-archiso mkinitcpio-nfs-utils mtools nano nbd ndisc6 nfs-utils nilfs-utils nmap ntfs-3g nvme-cli openconnect openssh openvpn partclone parted partimage ppp pptpclient reflector reiserfsprogs rp-pppoe rsync rxvt-unicode-terminfo sdparm sg3_utils smartmontools sudo syslinux systemd-resolvconf tcpdump terminus-font termite-terminfo testdisk usb_modeswitch usbutils vim vpnc wireless-regdb wireless_tools wpa_supplicant wvdial xfsprogs xl2tpd zsh

[mkarchiso] INFO: Copying custom custom airootfs files and setting up user home directories...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Installing packages to '/home/marc/Documents/archiso/w/x86_64/airootfs/'...
==> Creating install root at /home/marc/Documents/archiso/w/x86_64/airootfs
==> Installing packages to /home/marc/Documents/archiso/w/x86_64/airootfs
:: Synchronizing package databases...
 core                  130.8 KiB  2.78 MiB/s 00:00 [######################] 100%
 extra                1654.1 KiB  9.13 MiB/s 00:00 [######################] 100%
 community               5.2 MiB  11.8 MiB/s 00:00 [######################] 100%
resolving dependencies...
looking for conflicting packages...
warning: dependency cycle detected:
warning: smbclient will be installed before its cifs-utils dependency

Packages (279) acl-2.2.53-3  archlinux-keyring-20200820-1  argon2-20190702-3
               attr-2.4.48-3  audit-2.8.5-6  avahi-0.8+15+ge8a3dd0-1
               bash-5.0.018-1  bc-1.07.1-4  bzip2-1.0.8-3
               ca-certificates-20181109-4  ca-certificates-mozilla-3.57-1
               ca-certificates-utils-20181109-4  cifs-utils-6.11-1
               coreutils-8.32-1  cryptsetup-2.3.4-1  curl-7.72.0-2  db-5.3.28-5
               dbus-1.12.20-1  device-mapper-2.02.187-3  ding-libs-0.6.1-3
               dnssec-anchors-20190629-2  drbl-2.30.5-1  e2fsprogs-1.45.6-3
               ecryptfs-utils-111-4  efivar-37-4  expat-2.2.9-3  file-5.39-1
               filesystem-2020.09.03-1  findutils-4.7.0-2  fuse-common-3.9.3-1
               fuse2-2.9.9-4  fuse3-3.9.3-1  gawk-5.1.0-1  gcc-libs-10.2.0-3
               gdbm-1.18.1-3  gettext-0.21-1  glib2-2.66.0-1  glibc-2.32-4
               gmp-6.2.0-1  gnupg-2.2.23-1  gnutls-3.6.15-1  gpgme-1.14.0-1
               grep-3.4-1  groff-1.22.4-3  gssproxy-0.8.3-1  gzip-1.10-3
               hicolor-icon-theme-0.17-2  hwids-20200813.1-1
               iana-etc-20200905-1  icu-67.1-1  inetutils-1.9.4-8
               iproute2-5.8.0-1  iptables-1:1.8.5-2  iputils-20200821-1
               iw-5.8-1  jansson-2.13.1-1  json-c-0.15-1  kbd-2.3.0-2
               keyutils-1.6.3-1  kmod-27-2  krb5-1.18.2-1  lbzip2-2.5-5
               ldb-1:2.2.0-1  ldns-1.7.1-2  less-551-3  libaio-0.3.112-2
               libarchive-3.4.3-1  libassuan-2.5.3-2  libbsd-0.10.0-2
               libcap-2.43-1  libcap-ng-0.7.11-2  libcroco-0.6.13-2
               libcups-2.3.3-3  libdaemon-0.14-5  libedit-20191231_3.1-2
               libelf-0.181-1  libevent-2.1.12-1  libffi-3.3-3
               libgcrypt-1.8.6-1  libgpg-error-1.39-1  libidn-1.36-1
               libidn2-2.3.0-1  libjpeg-turbo-2.0.5-2  libksba-1.4.0-2
               libldap-2.4.53-1  libmaxminddb-1.4.3-1  libmnl-1.0.4-3
               libnetfilter_conntrack-1.0.8-1  libnewt-0.52.21-3
               libnfnetlink-1.0.1-4  libnftnl-1.1.7-1  libnghttp2-1.41.0-1
               libnl-3.5.0-2  libnsl-1.3.0-1  libotr-4.1.1-3
               libp11-kit-0.23.21-1  libpcap-1.9.1-2  libpipeline-1.5.3-1
               libpng-1.6.37-3  libproxy-0.4.15+33+g454a499-2  libpsl-0.21.1-1
               libsasl-2.1.27-3  libseccomp-2.4.2-1  libsecret-0.20.3-1
               libssh2-1.9.0-2  libtasn1-4.16.0-1  libtiff-4.1.0-2
               libtirpc-1.2.6-1  libunistring-0.9.10-2  libusb-1.0.23-2
               libuv-1.40.0-1  libxcrypt-4.4.17-1  libxml2-2.9.10-2
               licenses-20200427-1  linux-api-headers-5.8-1  lmdb-0.9.26-1
               lrzip-0.631-3  lua-5.4.0-2  lz4-1:1.9.2-2  lzo-2.10-3
               lzop-1.04-3  mkinitcpio-busybox-1.31.1-2  mpfr-4.1.0-1
               ncurses-6.2-1  net-tools-1.60.20181103git-2  nettle-3.6-1
               nfsidmap-2.5.1-1  npth-1.6-2  nspr-4.29-1  nss-3.57-1
               openssl-1.1.1.h-1  openssl-1.0-1.0.2.u-1  p11-kit-0.23.21-1
               pacman-5.2.2-1  pacman-mirrorlist-20200920-1  pam-1.4.0-3
               pambase-20200721.1-2  pbzip2-1.1.13-3  pciutils-3.7.0-1
               pcre-8.44-1  pcre2-10.35-1  pcsclite-1.9.0-1  perl-5.32.0-3
               pigz-2.4-2  pinentry-1.1.0-5  pixz-1.0.7-2
               pkcs11-helper-1.26.0-2  popt-1.18-1  procps-ng-3.3.16-2
               progsreiserfs-0.3.0.5-10  psmisc-23.3-2  python-3.8.5-2
               python-ply-3.11-5  readline-8.0.004-1  rpcbind-1.2.5-3
               run-parts-4.8.6.1-2  screen-4.8.0-2  sed-4.8-1  shadow-4.8.1-4
               slang-2.3.2-2  smbclient-4.13.0-1  sqlite-3.33.0-2
               sshfs-3.7.0-1  stoken-0.92-4  sysfsutils-2.1.0-11
               systemd-246.6-1  systemd-libs-246.6-1
               systemd-sysvcompat-246.6-1  talloc-2.3.1-3  tar-1.32-3
               tcl-8.6.10-2  tdb-1.4.3-2  tevent-1:0.10.2-1  texinfo-6.7-3
               thin-provisioning-tools-0.9.0-1  tzdata-2020a-1
               util-linux-2.36-4  util-linux-libs-2.36-4
               vim-runtime-8.2.1704-1  wvstreams-4.6.1-16  xplc-0.3.13-8
               xxhash-0.8.0-1  xz-5.2.5-1  zlib-1:1.2.11-4  zstd-1.4.5-1
               amd-ucode-20200916.00a84c5-1  arch-install-scripts-23-2
               b43-fwcutter-019-3  base-2-2  bind-9.16.7-1
               broadcom-wl-6.30.223.271-233  btrfs-progs-5.7-1
               clonezilla-3.35.2-3  crda-4.14-3  darkhttpd-1.12-6
               ddrescue-1.25-1  dhclient-4.4.2-2  dhcpcd-9.2.0-1
               diffutils-3.7-3  dmraid-1.0.0.rc16.3-12  dnsmasq-2.82-2
               dosfstools-4.1-3  edk2-shell-202005-3  efibootmgr-17-2
               ethtool-1:5.7-1  exfatprogs-1.0.4-2  f2fs-tools-1.14.0-1
               fsarchiver-0.8.5-2  gnu-netcat-0.7.1-8
               gpm-1.20.7.r38.ge82d1a6-2  gptfdisk-1.0.5-1
               grml-zsh-config-0.17.4-1  haveged-1.9.13-1  hdparm-9.58-3
               intel-ucode-20200616-1  ipw2100-fw-1.3-10  ipw2200-fw-3.1-8
               irssi-1.2.2-3  iwd-1.9-1  jfsutils-1.1.15-7
               kitty-terminfo-0.18.3-1  lftp-4.9.2-1  linux-5.8.13.arch1-1
               linux-atm-2.5.2-6  linux-firmware-20200916.00a84c5-1
               lsscsi-0.31-1  lvm2-2.02.187-3  lynx-2.8.9-3  man-db-2.9.3-1
               man-pages-5.08-1  mc-4.8.24-2  mdadm-4.1-2  memtest86+-5.01-4
               mkinitcpio-28-1  mkinitcpio-archiso-48-1
               mkinitcpio-nfs-utils-0.3-7  mtools-4.0.24-1  nano-5.2-1
               nbd-3.20-2  ndisc6-1.0.4-2  nfs-utils-2.5.1-1
               nilfs-utils-2.2.8-2  nmap-7.80-3  ntfs-3g-2017.3.23-5
               nvme-cli-1.12-2  openconnect-1:8.10-1  openssh-8.3p1-4
               openvpn-2.4.9-2  partclone-0.3.15-1  parted-3.3-2
               partimage-0.6.9-13  ppp-2.4.7-7  pptpclient-1.10.0-2
               reflector-2020.9-1  reiserfsprogs-3.6.27-3  rp-pppoe-3.14-1
               rsync-3.2.3-1  rxvt-unicode-terminfo-9.22-10  sdparm-1.11-1
               sg3_utils-1.45-1  smartmontools-7.1-4  sudo-1.9.3.p1-1
               syslinux-6.04.pre2.r11.gbf6db5b4-3  systemd-resolvconf-246.6-1
               tcpdump-4.9.3-2  terminus-font-4.48-3  termite-terminfo-15-2
               testdisk-7.1-2  usb_modeswitch-2.6.1-1  usbutils-012-2
               vim-8.2.1704-1  vpnc-1:0.5.3.r468.r81-2
               wireless-regdb-2020.04.29-1  wireless_tools-30.pre9-3
               wpa_supplicant-2:2.9-7  wvdial-1.61-8  xfsprogs-5.8.0-1
               xl2tpd-1.3.15-2  zsh-5.8-1

Total Installed Size:  1563.74 MiB

:: Proceed with installation? [Y/n] 
(279/279) checking keys in keyring                 [######################] 100%
(279/279) checking package integrity               [######################] 100%
(279/279) loading package files                    [######################] 100%
(279/279) checking for file conflicts              [######################] 100%
:: Processing package changes...
(  1/279) installing amd-ucode                     [######################] 100%
(  2/279) installing linux-api-headers             [######################] 100%
(  3/279) installing tzdata                        [######################] 100%
(  4/279) installing iana-etc                      [######################] 100%
(  5/279) installing filesystem                    [######################] 100%
warning: /home/marc/Documents/archiso/w/x86_64/airootfs/etc/motd installed as /home/marc/Documents/archiso/w/x86_64/airootfs/etc/motd.pacnew
warning: /home/marc/Documents/archiso/w/x86_64/airootfs/etc/passwd installed as /home/marc/Documents/archiso/w/x86_64/airootfs/etc/passwd.pacnew
warning: /home/marc/Documents/archiso/w/x86_64/airootfs/etc/resolv.conf installed as /home/marc/Documents/archiso/w/x86_64/airootfs/etc/resolv.conf.pacnew
warning: /home/marc/Documents/archiso/w/x86_64/airootfs/etc/shadow installed as /home/marc/Documents/archiso/w/x86_64/airootfs/etc/shadow.pacnew
(  6/279) installing glibc                         [######################] 100%
Optional dependencies for glibc
    gd: for memusagestat
(  7/279) installing gcc-libs                      [######################] 100%
(  8/279) installing ncurses                       [######################] 100%
(  9/279) installing readline                      [######################] 100%
( 10/279) installing bash                          [######################] 100%
Optional dependencies for bash
    bash-completion: for tab completion
( 11/279) installing gmp                           [######################] 100%
( 12/279) installing mpfr                          [######################] 100%
( 13/279) installing gawk                          [######################] 100%
( 14/279) installing attr                          [######################] 100%
( 15/279) installing acl                           [######################] 100%
( 16/279) installing libcap                        [######################] 100%
( 17/279) installing gdbm                          [######################] 100%
( 18/279) installing db                            [######################] 100%
( 19/279) installing libxcrypt                     [######################] 100%
( 20/279) installing perl                          [######################] 100%
( 21/279) installing openssl                       [######################] 100%
Optional dependencies for openssl
    ca-certificates [pending]
( 22/279) installing coreutils                     [######################] 100%
( 23/279) installing bzip2                         [######################] 100%
( 24/279) installing expat                         [######################] 100%
( 25/279) installing lz4                           [######################] 100%
( 26/279) installing xz                            [######################] 100%
( 27/279) installing zlib                          [######################] 100%
( 28/279) installing zstd                          [######################] 100%
( 29/279) installing libarchive                    [######################] 100%
( 30/279) installing findutils                     [######################] 100%
( 31/279) installing libtasn1                      [######################] 100%
( 32/279) installing libffi                        [######################] 100%
( 33/279) installing libp11-kit                    [######################] 100%
( 34/279) installing libgpg-error                  [######################] 100%
( 35/279) installing libgcrypt                     [######################] 100%
( 36/279) installing systemd-libs                  [######################] 100%
( 37/279) installing p11-kit                       [######################] 100%
( 38/279) installing ca-certificates-utils         [######################] 100%
( 39/279) installing ca-certificates-mozilla       [######################] 100%
( 40/279) installing ca-certificates               [######################] 100%
( 41/279) installing util-linux-libs               [######################] 100%
( 42/279) installing e2fsprogs                     [######################] 100%
( 43/279) installing libsasl                       [######################] 100%
( 44/279) installing libldap                       [######################] 100%
( 45/279) installing keyutils                      [######################] 100%
( 46/279) installing krb5                          [######################] 100%
( 47/279) installing libssh2                       [######################] 100%
( 48/279) installing libunistring                  [######################] 100%
( 49/279) installing libidn2                       [######################] 100%
( 50/279) installing libpsl                        [######################] 100%
( 51/279) installing libnghttp2                    [######################] 100%
( 52/279) installing curl                          [######################] 100%
( 53/279) installing npth                          [######################] 100%
( 54/279) installing libksba                       [######################] 100%
( 55/279) installing libassuan                     [######################] 100%
( 56/279) installing pcre                          [######################] 100%
( 57/279) installing glib2                         [######################] 100%
Optional dependencies for glib2
    python: gdbus-codegen, glib-genmarshal, glib-mkenums, gtester-report
    [pending]
    libelf: gresource inspection tool [pending]
( 58/279) installing libsecret                     [######################] 100%
Optional dependencies for libsecret
    org.freedesktop.secrets: secret storage backend
( 59/279) installing pinentry                      [######################] 100%
Optional dependencies for pinentry
    gtk2: gtk2 backend
    qt5-base: qt backend
    gcr: gnome3 backend
( 60/279) installing nettle                        [######################] 100%
( 61/279) installing gnutls                        [######################] 100%
Optional dependencies for gnutls
    guile: for use with Guile bindings
( 62/279) installing sqlite                        [######################] 100%
( 63/279) installing gnupg                         [######################] 100%
Optional dependencies for gnupg
    libldap: gpg2keys_ldap [installed]
    libusb-compat: scdaemon
    pcsclite: scdaemon [pending]
( 64/279) installing gpgme                         [######################] 100%
( 65/279) installing pacman-mirrorlist             [######################] 100%
( 66/279) installing archlinux-keyring             [######################] 100%
( 67/279) installing pacman                        [######################] 100%
Optional dependencies for pacman
    perl-locale-gettext: translation support in makepkg-template
( 68/279) installing libtirpc                      [######################] 100%
( 69/279) installing pambase                       [######################] 100%
( 70/279) installing libcap-ng                     [######################] 100%
( 71/279) installing audit                         [######################] 100%
( 72/279) installing pam                           [######################] 100%
( 73/279) installing shadow                        [######################] 100%
( 74/279) installing libseccomp                    [######################] 100%
( 75/279) installing file                          [######################] 100%
( 76/279) installing util-linux                    [######################] 100%
Optional dependencies for util-linux
    python: python bindings to libmount [pending]
    words: default dictionary for look
( 77/279) installing arch-install-scripts          [######################] 100%
( 78/279) installing b43-fwcutter                  [######################] 100%
( 79/279) installing grep                          [######################] 100%
( 80/279) installing procps-ng                     [######################] 100%
( 81/279) installing sed                           [######################] 100%
( 82/279) installing tar                           [######################] 100%
( 83/279) installing icu                           [######################] 100%
( 84/279) installing libxml2                       [######################] 100%
( 85/279) installing libcroco                      [######################] 100%
( 86/279) installing gettext                       [######################] 100%
Optional dependencies for gettext
    git: for autopoint infrastructure updates
( 87/279) installing hwids                         [######################] 100%
( 88/279) installing kmod                          [######################] 100%
( 89/279) installing pciutils                      [######################] 100%
( 90/279) installing psmisc                        [######################] 100%
( 91/279) installing less                          [######################] 100%
( 92/279) installing gzip                          [######################] 100%
( 93/279) installing licenses                      [######################] 100%
( 94/279) installing device-mapper                 [######################] 100%
( 95/279) installing popt                          [######################] 100%
( 96/279) installing json-c                        [######################] 100%
( 97/279) installing argon2                        [######################] 100%
( 98/279) installing cryptsetup                    [######################] 100%
( 99/279) installing dbus                          [######################] 100%
(100/279) installing libmnl                        [######################] 100%
(101/279) installing libnftnl                      [######################] 100%
(102/279) installing libnl                         [######################] 100%
(103/279) installing libusb                        [######################] 100%
(104/279) installing libpcap                       [######################] 100%
(105/279) installing libnfnetlink                  [######################] 100%
(106/279) installing libnetfilter_conntrack        [######################] 100%
(107/279) installing iptables                      [######################] 100%
(108/279) installing kbd                           [######################] 100%
(109/279) installing libelf                        [######################] 100%
(110/279) installing pcre2                         [######################] 100%
(111/279) installing systemd                       [######################] 100%
Initializing machine ID from random generator.
Creating group sys with gid 3.
Creating group mem with gid 8.
Creating group ftp with gid 11.
Creating group mail with gid 12.
Creating group log with gid 19.
Creating group smmsp with gid 25.
Creating group proc with gid 26.
Creating group games with gid 50.
Creating group lock with gid 54.
Creating group network with gid 90.
Creating group floppy with gid 94.
Creating group scanner with gid 96.
Creating group power with gid 98.
Creating group adm with gid 999.
Creating group wheel with gid 998.
Creating group kmem with gid 997.
Creating group tty with gid 5.
Creating group utmp with gid 996.
Creating group audio with gid 995.
Creating group disk with gid 994.
Creating group input with gid 993.
Creating group kvm with gid 992.
Creating group lp with gid 991.
Creating group optical with gid 990.
Creating group render with gid 989.
Creating group storage with gid 988.
Creating group uucp with gid 987.
Creating group video with gid 986.
Creating group users with gid 985.
Creating group systemd-journal with gid 984.
Creating group rfkill with gid 983.
Creating group bin with gid 1.
Creating user bin (n/a) with uid 1 and gid 1.
Creating group daemon with gid 2.
Creating user daemon (n/a) with uid 2 and gid 2.
Creating user mail (n/a) with uid 8 and gid 12.
Creating user ftp (n/a) with uid 14 and gid 11.
Creating group http with gid 33.
Creating user http (n/a) with uid 33 and gid 33.
Creating group nobody with gid 65534.
Creating user nobody (Nobody) with uid 65534 and gid 65534.
Creating group dbus with gid 81.
Creating user dbus (System Message Bus) with uid 81 and gid 81.
Creating group systemd-journal-remote with gid 982.
Creating user systemd-journal-remote (systemd Journal Remote) with uid 982 and gid 982.
Creating group systemd-network with gid 981.
Creating user systemd-network (systemd Network Management) with uid 981 and gid 981.
Creating group systemd-resolve with gid 980.
Creating user systemd-resolve (systemd Resolver) with uid 980 and gid 980.
Creating group systemd-timesync with gid 979.
Creating user systemd-timesync (systemd Time Synchronization) with uid 979 and gid 979.
Creating group systemd-coredump with gid 978.
Creating user systemd-coredump (systemd Core Dumper) with uid 978 and gid 978.
Creating group uuidd with gid 68.
Creating user uuidd (n/a) with uid 68 and gid 68.
Created symlink /etc/systemd/system/getty.target.wants/getty@tty1.service -> /usr/lib/systemd/system/getty@.service.
Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target -> /usr/lib/systemd/system/remote-fs.target.
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
   bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Optional dependencies for systemd
    libmicrohttpd: remote journald capabilities
    quota-tools: kernel-level quota management
    systemd-sysvcompat: symlink package to provide sysvinit binaries [pending]
    polkit: allow administration as unprivileged user
    curl: machinectl pull-tar and pull-raw [installed]
(112/279) installing systemd-sysvcompat            [######################] 100%
(113/279) installing iputils                       [######################] 100%
(114/279) installing iproute2                      [######################] 100%
Optional dependencies for iproute2
    linux-atm: ATM support [pending]
(115/279) installing base                          [######################] 100%
Optional dependencies for base
    linux: bare metal support [pending]
(116/279) installing dnssec-anchors                [######################] 100%
(117/279) installing libedit                       [######################] 100%
(118/279) installing libmaxminddb                  [######################] 100%
Optional dependencies for libmaxminddb
    geoip2-database: IP geolocation databases
(119/279) installing libnsl                        [######################] 100%
(120/279) installing libuv                         [######################] 100%
(121/279) installing lmdb                          [######################] 100%
(122/279) installing python                        [######################] 100%
Optional dependencies for python
    python-setuptools
    python-pip
    sqlite [installed]
    mpdecimal: for decimal
    xz: for lzma [installed]
    tk: for tkinter
(123/279) installing python-ply                    [######################] 100%
(124/279) installing bind                          [######################] 100%
(125/279) installing mkinitcpio-busybox            [######################] 100%
(126/279) installing diffutils                     [######################] 100%
(127/279) installing mkinitcpio                    [######################] 100%
warning: /home/marc/Documents/archiso/w/x86_64/airootfs/etc/mkinitcpio.conf installed as /home/marc/Documents/archiso/w/x86_64/airootfs/etc/mkinitcpio.conf.pacnew
Optional dependencies for mkinitcpio
    xz: Use lzma or xz compression for the initramfs image [installed]
    bzip2: Use bzip2 compression for the initramfs image [installed]
    lzop: Use lzo compression for the initramfs image [pending]
    lz4: Use lz4 compression for the initramfs image [installed]
    mkinitcpio-nfs-utils: Support for root filesystem on NFS [pending]
(128/279) installing linux                         [######################] 100%
Optional dependencies for linux
    crda: to set the correct wireless channels of your country [pending]
    linux-firmware: firmware images needed for some devices [pending]
(129/279) installing broadcom-wl                   [######################] 100%
(130/279) installing lzo                           [######################] 100%
(131/279) installing btrfs-progs                   [######################] 100%
Optional dependencies for btrfs-progs
    python: libbtrfsutil python bindings [installed]
    e2fsprogs: btrfs-convert [installed]
    reiserfsprogs: btrfs-convert [pending]
(132/279) installing bc                            [######################] 100%
(133/279) installing drbl                          [######################] 100%
(134/279) installing progsreiserfs                 [######################] 100%
(135/279) installing fuse-common                   [######################] 100%
(136/279) installing fuse2                         [######################] 100%
(137/279) installing ntfs-3g                       [######################] 100%
(138/279) installing nilfs-utils                   [######################] 100%
(139/279) installing partclone                     [######################] 100%
(140/279) installing slang                         [######################] 100%
(141/279) installing gpm                           [######################] 100%
(142/279) installing libnewt                       [######################] 100%
Optional dependencies for libnewt
    tcl: whiptcl support [pending]
    python: libnewt support with the _snack module [installed]
    python2: libnewt support with the _snack module
(143/279) installing partimage                     [######################] 100%
(144/279) installing pigz                          [######################] 100%
(145/279) installing fuse3                         [######################] 100%
(146/279) installing ldns                          [######################] 100%
Optional dependencies for ldns
    libpcap: ldns-dpa tool [installed]
(147/279) installing openssh                       [######################] 100%
warning: /home/marc/Documents/archiso/w/x86_64/airootfs/etc/ssh/sshd_config installed as /home/marc/Documents/archiso/w/x86_64/airootfs/etc/ssh/sshd_config.pacnew
Optional dependencies for openssh
    xorg-xauth: X11 forwarding
    x11-ssh-askpass: input passphrase in X
    libfido2: FIDO/U2F support
(148/279) installing sshfs                         [######################] 100%
(149/279) installing parted                        [######################] 100%
(150/279) installing gptfdisk                      [######################] 100%
(151/279) installing dosfstools                    [######################] 100%
(152/279) installing pbzip2                        [######################] 100%
(153/279) installing lbzip2                        [######################] 100%
(154/279) installing lrzip                         [######################] 100%
(155/279) installing pixz                          [######################] 100%
(156/279) installing lzop                          [######################] 100%
(157/279) installing nspr                          [######################] 100%
(158/279) installing nss                           [######################] 100%
(159/279) installing ecryptfs-utils                [######################] 100%
Optional dependencies for ecryptfs-utils
    python2: for python module
(160/279) installing screen                        [######################] 100%
(161/279) installing talloc                        [######################] 100%
Optional dependencies for talloc
    python: for python bindings [installed]
(162/279) installing tdb                           [######################] 100%
Optional dependencies for tdb
    python: for python bindings [installed]
(163/279) installing tevent                        [######################] 100%
Optional dependencies for tevent
    python: for python bindings [installed]
(164/279) installing ldb                           [######################] 100%
Optional dependencies for ldb
    python: for python bindings [installed]
(165/279) installing libbsd                        [######################] 100%
(166/279) installing libjpeg-turbo                 [######################] 100%
(167/279) installing libtiff                       [######################] 100%
Optional dependencies for libtiff
    freeglut: for using tiffgt
(168/279) installing libpng                        [######################] 100%
(169/279) installing libdaemon                     [######################] 100%
(170/279) installing avahi                         [######################] 100%
Optional dependencies for avahi
    gtk3: avahi-discover, avahi-discover-standalone, bshell, bssh, bvnc
    qt5-base: qt5 bindings
    libevent: libevent bindings [pending]
    nss-mdns: NSS support for mDNS
    python-twisted: avahi-bookmarks
    python-gobject: avahi-bookmarks, avahi-discover
    python-dbus: avahi-bookmarks, avahi-discover
(171/279) installing libcups                       [######################] 100%
(172/279) installing jansson                       [######################] 100%
(173/279) installing smbclient                     [######################] 100%
Optional dependencies for smbclient
    python-dnspython: samba_dnsupdate and samba_upgradedns in AD setup
(174/279) installing cifs-utils                    [######################] 100%
(175/279) installing clonezilla                    [######################] 100%
(176/279) installing wireless-regdb                [######################] 100%
(177/279) installing iw                            [######################] 100%
(178/279) installing crda                          [######################] 100%
Uncomment the right regulatory domain in /etc/conf.d/wireless-regdom.
It will automatically be set on boot.
(179/279) installing darkhttpd                     [######################] 100%
(180/279) installing ddrescue                      [######################] 100%
(181/279) installing run-parts                     [######################] 100%
(182/279) installing dhclient                      [######################] 100%
(183/279) installing dhcpcd                        [######################] 100%
Optional dependencies for dhcpcd
    openresolv: resolvconf support [pending]
(184/279) installing dmraid                        [######################] 100%
(185/279) installing dnsmasq                       [######################] 100%
(186/279) installing edk2-shell                    [######################] 100%
(187/279) installing efivar                        [######################] 100%
(188/279) installing efibootmgr                    [######################] 100%
(189/279) installing ethtool                       [######################] 100%
(190/279) installing exfatprogs                    [######################] 100%
(191/279) installing f2fs-tools                    [######################] 100%
(192/279) installing fsarchiver                    [######################] 100%
(193/279) installing texinfo                       [######################] 100%
(194/279) installing gnu-netcat                    [######################] 100%
(195/279) installing zsh                           [######################] 100%
(196/279) installing inetutils                     [######################] 100%
(197/279) installing grml-zsh-config               [######################] 100%
(198/279) installing haveged                       [######################] 100%
(199/279) installing hdparm                        [######################] 100%
Optional dependencies for hdparm
    bash: for wiper.sh script [installed]
(200/279) installing intel-ucode                   [######################] 100%
(201/279) installing ipw2100-fw                    [######################] 100%
(202/279) installing ipw2200-fw                    [######################] 100%
(203/279) installing libotr                        [######################] 100%
(204/279) installing irssi                         [######################] 100%
Optional dependencies for irssi
    perl-libwww: for the scriptassist script
(205/279) installing iwd                           [######################] 100%
(206/279) installing jfsutils                      [######################] 100%
(207/279) installing kitty-terminfo                [######################] 100%
(208/279) installing hicolor-icon-theme            [######################] 100%
(209/279) installing lftp                          [######################] 100%
Optional dependencies for lftp
    perl: needed for convert-netscape-cookies and verify-file [installed]
(210/279) installing linux-atm                     [######################] 100%
(211/279) installing linux-firmware                [######################] 100%
(212/279) installing sysfsutils                    [######################] 100%
(213/279) installing lsscsi                        [######################] 100%
(214/279) installing libaio                        [######################] 100%
(215/279) installing thin-provisioning-tools       [######################] 100%
(216/279) installing lvm2                          [######################] 100%
(217/279) installing libidn                        [######################] 100%
(218/279) installing lynx                          [######################] 100%
(219/279) installing groff                         [######################] 100%
Optional dependencies for groff
    netpbm: for use together with man -H command interaction in browsers
    psutils: for use together with man -H command interaction in browsers
    libxaw: for gxditview
    perl-file-homedir: for use with glilypond
(220/279) installing libpipeline                   [######################] 100%
(221/279) installing man-db                        [######################] 100%
Optional dependencies for man-db
    gzip [installed]
(222/279) installing man-pages                     [######################] 100%
(223/279) installing mc                            [######################] 100%
Optional dependencies for mc
    aspell: spelling corrections
    cabextract: ucab extfs
    cdparanoia: audio extfs
    cdrkit: iso9660 extfs
    cvs: CVS support
    gawk: hp48+ extfs [installed]
    mtools: a+ extfs [pending]
    p7zip: support for 7zip archives
    perl: needed by several extfs scripts [installed]
    python-boto: s3+ extfs
    python-pytz: s3+ extfs
    samba: VFS support
    unace: uace extfs
    unarj: uarj extfs
    unrar: urar extfs
    zip: uzip extfs
(224/279) installing mdadm                         [######################] 100%
(225/279) installing memtest86+                    [######################] 100%
(226/279) installing mkinitcpio-archiso            [######################] 100%
(227/279) installing mkinitcpio-nfs-utils          [######################] 100%
(228/279) installing mtools                        [######################] 100%
Optional dependencies for mtools
    libx11: required by floppyd
    libsm: required by floppyd
(229/279) installing nano                          [######################] 100%
(230/279) installing nbd                           [######################] 100%
(231/279) installing ndisc6                        [######################] 100%
(232/279) installing rpcbind                       [######################] 100%
(233/279) installing nfsidmap                      [######################] 100%
(234/279) installing ding-libs                     [######################] 100%
(235/279) installing gssproxy                      [######################] 100%
(236/279) installing libevent                      [######################] 100%
Optional dependencies for libevent
    python: to use event_rpcgen.py [installed]
(237/279) installing nfs-utils                     [######################] 100%
Optional dependencies for nfs-utils
    sqlite: for nfsdcltrack usage [installed]
    python: for nfsiostat, nfsdclnts and mountstats usage [installed]
(238/279) installing lua                           [######################] 100%
(239/279) installing nmap                          [######################] 100%
Optional dependencies for nmap
    python2: various scripts
(240/279) installing nvme-cli                      [######################] 100%
(241/279) installing libproxy                      [######################] 100%
Optional dependencies for libproxy
    networkmanager: NetworkManager configuration module
    perl: Perl bindings [installed]
    python2: Python 2.x bindings
    python: Python 3.x bindings [installed]
    libproxy-mozjs: PAC proxy support (via MozJS)
    libproxy-webkit: PAC proxy support (via WebKit)
(242/279) installing vpnc                          [######################] 100%
Optional dependencies for vpnc
    openresolv: Let vpnc manage resolv.conf [pending]
(243/279) installing pcsclite                      [######################] 100%
(244/279) installing stoken                        [######################] 100%
Optional dependencies for stoken
    gtk3: required for stoken-gui
(245/279) installing openconnect                   [######################] 100%
Optional dependencies for openconnect
    python: tncc-wrapper [installed]
(246/279) installing pkcs11-helper                 [######################] 100%
(247/279) installing openvpn                       [######################] 100%
Optional dependencies for openvpn
    easy-rsa: easy CA and certificate handling
    pam: authenticate via PAM [installed]
(248/279) installing ppp                           [######################] 100%
(249/279) installing pptpclient                    [######################] 100%
(250/279) installing reflector                     [######################] 100%
warning: /home/marc/Documents/archiso/w/x86_64/airootfs/etc/xdg/reflector/reflector.conf installed as /home/marc/Documents/archiso/w/x86_64/airootfs/etc/xdg/reflector/reflector.conf.pacnew
Optional dependencies for reflector
    rsync: rate rsync mirrors [pending]
(251/279) installing reiserfsprogs                 [######################] 100%
(252/279) installing net-tools                     [######################] 100%
(253/279) installing rp-pppoe                      [######################] 100%
>>> The kernel-mode plugin has a new place.
>>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
>>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
(254/279) installing xxhash                        [######################] 100%
(255/279) installing rsync                         [######################] 100%
(256/279) installing rxvt-unicode-terminfo         [######################] 100%
(257/279) installing sdparm                        [######################] 100%
(258/279) installing sg3_utils                     [######################] 100%
(259/279) installing smartmontools                 [######################] 100%
Optional dependencies for smartmontools
    s-nail: to get mail alerts to work
(260/279) installing sudo                          [######################] 100%
(261/279) installing syslinux                      [######################] 100%

==> For setting up Syslinux BIOS using the syslinux-install_update script follow
    https://wiki.archlinux.org/index.php/Syslinux#Automatic_Install

==> For setting up Syslinux EFI follow
    https://wiki.archlinux.org/index.php/Syslinux#UEFI_Systems

==> The syslinux-install_update script does not currently support EFI install

Optional dependencies for syslinux
    perl-crypt-passwdmd5: For md5pass
    perl-digest-sha1: For sha1pass
    mtools: For mkdiskimage and syslinux support [installed]
    gptfdisk: For GPT support [installed]
    util-linux: For isohybrid [installed]
    efibootmgr: For EFI support [installed]
    dosfstools: For EFI support [installed]
(262/279) installing systemd-resolvconf            [######################] 100%
(263/279) installing tcpdump                       [######################] 100%
(264/279) installing terminus-font                 [######################] 100%
(265/279) installing termite-terminfo              [######################] 100%
(266/279) installing testdisk                      [######################] 100%
(267/279) installing tcl                           [######################] 100%
(268/279) installing usb_modeswitch                [######################] 100%
(269/279) installing usbutils                      [######################] 100%
Optional dependencies for usbutils
    python: for lsusb.py usage [installed]
    coreutils: for lsusb.py usage [installed]
(270/279) installing vim-runtime                   [######################] 100%
Optional dependencies for vim-runtime
    sh: support for some tools and macros [installed]
    python: demoserver example tool [installed]
    gawk: mve tools upport [installed]
(271/279) installing vim                           [######################] 100%
Optional dependencies for vim
    python2: Python 2 language support
    python: Python 3 language support [installed]
    ruby: Ruby language support
    lua: Lua language support [installed]
    perl: Perl language support [installed]
    tcl: Tcl language support [installed]
(272/279) installing wireless_tools                [######################] 100%
(273/279) installing wpa_supplicant                [######################] 100%
(274/279) installing xplc                          [######################] 100%
(275/279) installing openssl-1.0                   [######################] 100%
Optional dependencies for openssl-1.0
    ca-certificates [installed]
(276/279) installing wvstreams                     [######################] 100%
(277/279) installing wvdial                        [######################] 100%
(278/279) installing xfsprogs                      [######################] 100%
Optional dependencies for xfsprogs
    python: for xfs_scrub_all script [installed]
    smtp-forwarder: for xfs_scrub_fail script
(279/279) installing xl2tpd                        [######################] 100%
:: Running post-transaction hooks...
( 1/14) Creating system user accounts...
Creating group avahi with gid 977.
Creating user avahi (Avahi mDNS/DNS-SD daemon) with uid 977 and gid 977.
Creating group named with gid 40.
Creating user named (BIND DNS Server) with uid 40 and gid 40.
Creating group dhcpcd with gid 976.
Creating user dhcpcd (dhcpcd privilege separation) with uid 976 and gid 976.
Creating group dnsmasq with gid 975.
Creating user dnsmasq (dnsmasq daemon) with uid 975 and gid 975.
Creating group nbd with gid 974.
Creating user nbd (Network Block Device) with uid 974 and gid 974.
Creating group partimag with gid 110.
Creating user partimag (Partimage user) with uid 110 and gid 110.
Creating group rpc with gid 32.
Creating user rpc (Rpcbind Daemon) with uid 32 and gid 32.
( 2/14) Updating journal message catalog...
( 3/14) Reloading system manager configuration...
Running in chroot, ignoring command 'daemon-reload'
( 4/14) Updating udev hardware database...
( 5/14) Applying kernel sysctl settings...
Not setting net/ipv4/conf/all/rp_filter (explicit setting exists).
Not setting net/ipv4/conf/default/rp_filter (explicit setting exists).
Not setting net/ipv4/conf/all/accept_source_route (explicit setting exists).
Not setting net/ipv4/conf/default/accept_source_route (explicit setting exists).
Not setting net/ipv4/conf/all/promote_secondaries (explicit setting exists).
Not setting net/ipv4/conf/default/promote_secondaries (explicit setting exists).
( 6/14) Creating temporary files...
Failed to open file "/sys/devices/system/cpu/microcode/reload": Read-only file system
error: command failed to execute correctly
( 7/14) Reloading device manager configuration...
Running in chroot, ignoring request.
( 8/14) Arming ConditionNeedsUpdate...
( 9/14) Rebuilding certificate stores...
(10/14) Updating module dependencies...
(11/14) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'archiso'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 5.8.13-arch1-1
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [memdisk]
  -> Running build hook: [archiso_shutdown]
  -> Running build hook: [archiso]
  -> Running build hook: [archiso_loop_mnt]
  -> Running build hook: [archiso_pxe_common]
==> WARNING: Possibly missing firmware for module: softing_cs
==> WARNING: Possibly missing firmware for module: lantiq_gswip
  -> Running build hook: [archiso_pxe_nbd]
  -> Running build hook: [archiso_pxe_http]
  -> Running build hook: [archiso_pxe_nfs]
  -> Running build hook: [archiso_kms]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: xhci_pci
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
==> Generating module dependencies
==> Creating xz-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
(12/14) Reloading system bus configuration...
Running in chroot, ignoring command 'try-reload-or-restart'
(13/14) Warn about old perl modules
(14/14) Updating the info directory file...
[mkarchiso] INFO: Done! Packages installed successfully.
[mkarchiso] INFO: Copying /etc/skel/* to user homes...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Running customize_airootfs.sh in '/home/marc/Documents/archiso/w/x86_64/airootfs' chroot...
[mkarchiso] WARNING: customize_airootfs.sh is deprecated! Support for it will be removed in a future archiso version.
==> WARNING: /home/marc/Documents/archiso/w/x86_64/airootfs is not a mountpoint. This may have undesirable side effects.
Generating locales...
  en_US.UTF-8... done
Generation complete.
[mkarchiso] INFO: Done! customize_airootfs.sh run successfully.
[mkarchiso] INFO: Creating a list of installed packages on live-enviroment...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Setting up SYSLINUX for BIOS booting from a disk...
[mkarchiso] INFO: Preparing kernel and intramfs for the ISO 9660 file system...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Done! SYSLINUX set up for BIOS booting from a disk successfully.
[mkarchiso] INFO: Setting up SYSLINUX for BIOS booting from an optical disc...
[mkarchiso] INFO: Done! SYSLINUX set up for BIOS booting from an optical disc successfully.
[mkarchiso] INFO: Setting up systemd-boot for UEFI booting...
mkfs.fat 4.1 (2017-01-24)
[mkarchiso] INFO: Preparing kernel and intramfs for the FAT file system...
Disk full
mais pas plus avancé au final...
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10596
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [Arrchiso] install: cannot stat '/home/marc/Documents/archiso/working/x86_64/airootfs/boot/initramfs-*.img': No such

Message par FoolEcho »

Salut,
PowaBanga a écrit :
sam. 03 oct. 2020, 15:16

Code : Tout sélectionner

Disk full
mais pas plus avancé au final...
Au contraire. Ta destination n'a pas la capacité suffisante.
«The following statement is not true. The previous statement is true.» :nage:
laurent85
Elfe
Messages : 665
Inscription : mar. 16 oct. 2018, 21:05

Re: [Archiso] install: cannot stat '/home/marc/Documents/archiso/working/x86_64/airootfs/boot/initramfs-*.img': No such

Message par laurent85 »

Bonjour,
C'est un bug d'archiso, il y a une mise à jour v48.1-1
Tuto Kde Plasma + gestionnaire de fenêtres i3
Live USB avec persistance Archuseriso
Avatar de l’utilisateur
CoudUr
yeomen
Messages : 217
Inscription : sam. 06 avr. 2013, 17:12

Re: [Archiso] install: cannot stat '/home/marc/Documents/archiso/working/x86_64/airootfs/boot/initramfs-*.img': No such

Message par CoudUr »

Testé aujourd'hui avec la version 48.1-1, pas de souci ;)
Avatar de l’utilisateur
PowaBanga
archer
Messages : 101
Inscription : mar. 12 sept. 2017, 21:15

Re: [Archiso] install: cannot stat '/home/marc/Documents/archiso/working/x86_64/airootfs/boot/initramfs-*.img': No such

Message par PowaBanga »

ha punaise, je me disai bien, je teste ça demain, merci :)
Répondre