[serveurs de son] Problème de son (résolu)

Applications, problèmes de configuration réseau
Répondre
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

[serveurs de son] Problème de son (résolu)

Message par Caocoa »

Bonjour,
Depuis quelques temps j'ai des problèmes de son. Je ne peux plus lire de mp3 ou de vidéo avec totem car à chaque « une erreur survient » et une fenêtre m'informe :
Une erreur est survenue a écrit :L'élément autoaudiosink configuré audiosinkbin ne fonctionne pas.
Quand je m’intéresse à la sortie console, j'obtiens :

Code : Tout sélectionner

$ totem Track\ 3.wav 

(totem:1783): GStreamer-CRITICAL **: gst_mini_object_copy: assertion `mini_object != NULL' failed

(totem:1783): GStreamer-CRITICAL **: gst_caps_get_size: assertion `GST_IS_CAPS (caps)' failed

(totem:1783): GStreamer-CRITICAL **: gst_mini_object_unref: assertion `mini_object != NULL' failed

** (totem:1783): CRITICAL **: gst_pad_set_caps: assertion `caps != NULL && gst_caps_is_fixed (caps)' failed

(totem:1783): libpeas-WARNING **: grilo: libgrilo-0.2.so.1: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type

(totem:1783): libpeas-WARNING **: Error loading plugin 'grilo'
De plus, l'applet son de Gnome Shell a disparu. J'ai l'impression qu'elle se lance à chaque démarrage mais bogue donc s'éteint. Quand je vais voir dans les paramètres systèmes de Gnome, aucune carte audio n'est reconnue. En revanche, le son en provenance d'internet marche bien, ce que je trouve vraiment bizarre !

Pour information, voici la configuration générale de mon système :

Code : Tout sélectionner

$ uname -a
Linux C40C04 3.8.11-1-ARCH #1 SMP PREEMPT Wed May 1 20:18:57 CEST 2013 x86_64 GNU/Linux
J'ai une carte son que j'utilise et une sortie hdmi que je n'utilise pas. Pourtant, mes cartes sont visibles, n'est-ce pas ?

Code : Tout sélectionner

$ cat /proc/asound/cards
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xf2500000 irq 46
 1 [HDMI           ]: HDA-Intel - HDA ATI HDMI
                      HDA ATI HDMI at 0xcfeec000 irq 47
$ lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series]
$ lsmod | grep snd
snd_hda_codec_hdmi     27857  1 
snd_hda_codec_realtek    62279  1 
snd_hda_intel          33946  0 
snd_hda_codec         101474  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep               6364  1 snd_hda_codec
snd_pcm                76892  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc          7298  2 snd_pcm,snd_hda_intel
snd_timer              18687  1 snd_pcm
snd                    58893  7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore               5418  1 snd
Edition et résolution
Il s'agit d'une sombre histoire de fichiers qui n'appartenaient plus au bon utilisateur ou au bon groupe. Il suffit de vérifier que le dossier de l'utilisateur lui appartient bien.

Code : Tout sélectionner

[caocoa@C40C04 ~]$ su -
Mot de passe :
[root@C40C04 ~]# chown -R caocoa:users /home/caocoa
[root@C40C04 ~]# déconnexion
[caocoa@C40C04 ~]$ rm -rf /tmp/pulse* ~/.pulse*
[caocoa@C40C04 ~]$ pulseaudio -k
E: [pulseaudio] main.c: Impossible de tuer le démon : Aucun processus de ce type
[caocoa@C40C04 ~]$ pulseaudio --start

Dernière modification par Caocoa le jeu. 18 juil. 2013, 15:22, modifié 3 fois.
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [en cours] Problème de son (totem et alsa)

Message par Caocoa »

Je poste ici le résultat de dmesg. J'ai enlevé au début une section concernant le bios pour ne pas dépasser la limite de longueur des messages de ce forum, je ne pense pas que ce soit des informations pertinentes dans notre cas :)

Code : Tout sélectionner

$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.11-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130425 (prerelease) (GCC) ) #1 SMP PREEMPT Wed May 1 20:18:57 CEST 2013
[    0.000000] Command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[etc…]
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: TOSHIBA Satellite A350/KTKAA, BIOS V1.70 12/26/2008
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0FFE00000 mask FFFF80000 write-protect
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6810-0x000f681f] mapped at [ffff8800000f6810]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xbfdfffff]
[    0.000000]  [mem 0x00000000-0xbfdfffff] page 2M
[    0.000000] kernel direct mapping tables up to 0xbfdfffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbfdfe000-0xbfdfffff]
[    0.000000] RAMDISK: [mem 0x7fd2b000-0x7fffefff]
[    0.000000] ACPI: RSDP 00000000000f6750 00024 (v02 TOSCPL)
[    0.000000] ACPI: XSDT 00000000bfdf45d6 00064 (v01 TOSCPL TOSCPL00 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bfde6000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000bfde7000 0853A (v02 Intel  CANTIGA  06040000 INTL 20060608)
[    0.000000] ACPI: FACS 00000000bfd9efc0 00040
[    0.000000] ACPI: HPET 00000000bfdfcd14 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000bfdfcd4c 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: SLIC 00000000bfdfcd88 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
[    0.000000] ACPI: OSFR 00000000bfdfcefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[    0.000000] ACPI: APIC 00000000bfdfcf70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bfdfcfd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 00000000bfde5000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbf8b0fff]
[    0.000000]   node   0: [mem 0xbf8b7000-0xbf9bbfff]
[    0.000000]   node   0: [mem 0xbfa0f000-0xbfb07fff]
[    0.000000]   node   0: [mem 0xbfd0f000-0xbfd18fff]
[    0.000000]   node   0: [mem 0xbfd1f000-0xbfd63fff]
[    0.000000]   node   0: [mem 0xbfd9f000-0xbfde3fff]
[    0.000000]   node   0: [mem 0xbfdfd000-0xbfdfffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1047253
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12206 pages used for memmap
[    0.000000]   DMA32 zone: 768920 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf8b1000 - 00000000bf8b7000
[    0.000000] PM: Registered nosave memory: 00000000bf9bc000 - 00000000bfa0f000
[    0.000000] PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
[    0.000000] PM: Registered nosave memory: 00000000bfd19000 - 00000000bfd1f000
[    0.000000] PM: Registered nosave memory: 00000000bfd64000 - 00000000bfd9f000
[    0.000000] PM: Registered nosave memory: 00000000bfde4000 - 00000000bfdfd000
[    0.000000] PM: Registered nosave memory: 00000000bfe00000 - 0000000100000000
[    0.000000] e820: [mem 0xbfe00000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85184 r8192 d21312 u1048576
[    0.000000] pcpu-alloc: s85184 r8192 d21312 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030881
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4042840k/5242880k available (4909k kernel code, 1053868k absent, 146172k reserved, 4023k data, 820k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2127.957 MHz processor
[    0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.24 BogoMIPS (lpj=7093190)
[    0.003341] pid_max: default: 32768 minimum: 301
[    0.003379] Security Framework initialized
[    0.003392] AppArmor: AppArmor disabled by boot time parameter
[    0.003752] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005787] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.007209] Mount-cache hash table entries: 256
[    0.007456] Initializing cgroup subsys cpuacct
[    0.007460] Initializing cgroup subsys memory
[    0.007470] Initializing cgroup subsys devices
[    0.007472] Initializing cgroup subsys freezer
[    0.007474] Initializing cgroup subsys net_cls
[    0.007476] Initializing cgroup subsys blkio
[    0.007506] CPU: Physical Processor ID: 0
[    0.007508] CPU: Processor Core ID: 0
[    0.007510] mce: CPU supports 6 MCE banks
[    0.007519] CPU0: Thermal monitoring enabled (TM2)
[    0.007524] process: using mwait in idle threads
[    0.007529] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[    0.007644] Freeing SMP alternatives: 20k freed
[    0.009052] ACPI: Core revision 20121018
[    0.009055] TOSHIBA Satellite detected - force copy of DSDT to local memory
[    0.009166] ACPI: Forced DSDT copy: length 0x0853A copied locally, original unmapped
[    0.013355] ftrace: allocating 19313 entries in 76 pages
[    0.020505] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054701] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P7450  @ 2.13GHz (fam: 06, model: 17, stepping: 06)
[    0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.056666] ... version:                2
[    0.056666] ... bit width:              40
[    0.056666] ... generic registers:      2
[    0.056666] ... value mask:             000000ffffffffff
[    0.056666] ... max period:             000000007fffffff
[    0.056666] ... fixed-purpose events:   3
[    0.056666] ... event mask:             0000000700000003
[    0.090053] smpboot: Booting Node   0, Processors  #1 OK
[    0.103252] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.103267] Brought up 2 CPUs
[    0.103269] smpboot: Total of 2 processors activated (8515.48 BogoMIPS)
[    0.103422] devtmpfs: initialized
[    0.106770] PM: Registering ACPI NVS region [mem 0xbfd64000-0xbfd9efff] (241664 bytes)
[    0.107678] RTC time: 10:04:58, date: 05/06/13
[    0.107722] NET: Registered protocol family 16
[    0.107881] ACPI: bus type pci registered
[    0.107964] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.107967] PCI: not using MMCONFIG
[    0.107969] PCI: Using configuration type 1 for base access
[    0.108607] bio: create slab <bio-0> at 0
[    0.108607] ACPI: Added _OSI(Module Device)
[    0.108607] ACPI: Added _OSI(Processor Device)
[    0.108607] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108607] ACPI: Added _OSI(Processor Aggregator Device)
[    0.110216] ACPI: EC: Look up EC in DSDT
[    0.113108] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.113636] ACPI: SSDT 00000000bfd1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.113956] ACPI: Dynamic OEM Table Load:
[    0.113959] ACPI: SSDT           (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.114081] ACPI: SSDT 00000000bfd19620 005A3 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.114385] ACPI: Dynamic OEM Table Load:
[    0.114388] ACPI: SSDT           (null) 005A3 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.114402] ACPI: SSDT 00000000bfd1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.114402] ACPI: Dynamic OEM Table Load:
[    0.114402] ACPI: SSDT           (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.114402] ACPI: SSDT 00000000bfd1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.114402] ACPI: Dynamic OEM Table Load:
[    0.114402] ACPI: SSDT           (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.116713] ACPI: Interpreter enabled
[    0.116713] ACPI: (supports S0 S3 S4 S5)
[    0.116751] ACPI: Using IOAPIC for interrupt routing
[    0.116771] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.117511] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.199331] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.199442] ACPI: No dock devices found.
[    0.199447] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.199712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.199715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.200325] PCI host bridge to bus 0000:00
[    0.200329] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.200331] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.200334] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.200336] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.200339] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.200341] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.200351] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.200372] DMAR: Forcing write-buffer flush capability
[    0.200373] DMAR: Disabling IOMMU for graphics on this chipset
[    0.200399] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.200441] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.200498] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.200556] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.200626] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.200684] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.200753] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.200811] pci 0000:00:1a.2: reg 20: [io  0x1840-0x185f]
[    0.200892] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.200918] pci 0000:00:1a.7: reg 10: [mem 0xf2504800-0xf2504bff]
[    0.201031] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.201067] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.201088] pci 0000:00:1b.0: reg 10: [mem 0xf2500000-0xf2503fff 64bit]
[    0.201188] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.201219] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.201323] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.201361] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.201465] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.201498] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.201602] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.201638] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.201741] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.201777] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.201834] pci 0000:00:1d.0: reg 20: [io  0x1860-0x187f]
[    0.201904] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.201962] pci 0000:00:1d.1: reg 20: [io  0x1880-0x189f]
[    0.202031] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.202089] pci 0000:00:1d.2: reg 20: [io  0x18a0-0x18bf]
[    0.202171] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.202197] pci 0000:00:1d.7: reg 10: [mem 0xf2504c00-0xf2504fff]
[    0.202310] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.202339] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.202434] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.202604] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.202633] pci 0000:00:1f.2: reg 10: [io  0x18f0-0x18f7]
[    0.202644] pci 0000:00:1f.2: reg 14: [io  0x18e4-0x18e7]
[    0.202656] pci 0000:00:1f.2: reg 18: [io  0x18e8-0x18ef]
[    0.202668] pci 0000:00:1f.2: reg 1c: [io  0x18e0-0x18e3]
[    0.202680] pci 0000:00:1f.2: reg 20: [io  0x18c0-0x18df]
[    0.202692] pci 0000:00:1f.2: reg 24: [mem 0xf2504000-0xf25047ff]
[    0.202763] pci 0000:00:1f.2: PME# supported from D3hot
[    0.202790] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.202812] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[    0.202842] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.202922] pci 0000:01:00.0: [1002:95c4] type 00 class 0x030000
[    0.202937] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.202948] pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
[    0.202960] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[    0.202998] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.203047] pci 0000:01:00.0: supports D1 D2
[    0.203077] pci 0000:01:00.1: [1002:aa28] type 00 class 0x040300
[    0.203092] pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[    0.203195] pci 0000:01:00.1: supports D1 D2
[    0.206681] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.206685] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.206688] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.206693] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.206751] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.206756] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.206761] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.206769] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.206851] pci 0000:0e:00.0: [10ec:8136] type 00 class 0x020000
[    0.206874] pci 0000:0e:00.0: reg 10: [io  0x4000-0x40ff]
[    0.206912] pci 0000:0e:00.0: reg 18: [mem 0xf2010000-0xf2010fff 64bit pref]
[    0.206936] pci 0000:0e:00.0: reg 20: [mem 0xf2000000-0xf200ffff 64bit pref]
[    0.206953] pci 0000:0e:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.207042] pci 0000:0e:00.0: supports D1 D2
[    0.207045] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.213352] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[    0.213358] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.213368] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[    0.213460] pci 0000:14:00.0: [8086:4232] type 00 class 0x028000
[    0.213501] pci 0000:14:00.0: reg 10: [mem 0xf2100000-0xf2101fff 64bit]
[    0.213698] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold
[    0.220023] pci 0000:00:1c.3: PCI bridge to [bus 14]
[    0.220031] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.220121] pci 0000:20:00.0: [197b:2380] type 00 class 0x0c0010
[    0.220149] pci 0000:20:00.0: reg 10: [mem 0xf2200000-0xf22007ff]
[    0.220170] pci 0000:20:00.0: reg 14: [mem 0xf2201000-0xf220107f]
[    0.220227] pci 0000:20:00.0: reg 20: [mem 0xf2200c00-0xf2200c7f]
[    0.220248] pci 0000:20:00.0: reg 24: [mem 0xf2200800-0xf220087f]
[    0.220409] pci 0000:20:00.1: [197b:2382] type 00 class 0x088000
[    0.220434] pci 0000:20:00.1: reg 10: [mem 0xf2201400-0xf22014ff]
[    0.220658] pci 0000:20:00.2: [197b:2381] type 00 class 0x080501
[    0.220682] pci 0000:20:00.2: reg 10: [mem 0xf2201800-0xf22018ff]
[    0.220905] pci 0000:20:00.3: [197b:2383] type 00 class 0x088000
[    0.220930] pci 0000:20:00.3: reg 10: [mem 0xf2201c00-0xf2201cff]
[    0.221152] pci 0000:20:00.4: [197b:2384] type 00 class 0x088000
[    0.221177] pci 0000:20:00.4: reg 10: [mem 0xf2202000-0xf22020ff]
[    0.226694] pci 0000:00:1c.5: PCI bridge to [bus 20]
[    0.226702] pci 0000:00:1c.5:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.226793] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[    0.226807] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.226810] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.226812] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.226814] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.226817] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.226856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.226898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.226987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.227020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.227051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.227085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.227122]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.227124]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.228519] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.228567] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.228615] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.228664] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.228709] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.228755] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.228803] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.228848] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.228910] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.228910] vgaarb: loaded
[    0.228910] vgaarb: bridge control possible 0000:01:00.0
[    0.228910] PCI: Using ACPI for IRQ routing
[    0.239253] PCI: pci_cache_line_size set to 64 bytes
[    0.239369] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.239371] e820: reserve RAM buffer [mem 0xbf8b1000-0xbfffffff]
[    0.239374] e820: reserve RAM buffer [mem 0xbf9bc000-0xbfffffff]
[    0.239376] e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
[    0.239378] e820: reserve RAM buffer [mem 0xbfd19000-0xbfffffff]
[    0.239380] e820: reserve RAM buffer [mem 0xbfd64000-0xbfffffff]
[    0.239382] e820: reserve RAM buffer [mem 0xbfde4000-0xbfffffff]
[    0.239383] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[    0.239489] NetLabel: Initializing
[    0.239491] NetLabel:  domain hash size = 128
[    0.239492] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.239508] NetLabel:  unlabeled traffic allowed by default
[    0.239523] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.239528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.239533] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.250011] Switching to clocksource hpet
[    0.256495] pnp: PnP ACPI init
[    0.256520] ACPI: bus type pnp registered
[    0.276709] pnp 00:00: [dma 4]
[    0.276743] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.276879] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.276884] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.276928] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.276993] system 00:03: [io  0x0480-0x048f] has been reserved
[    0.276996] system 00:03: [io  0xffff] has been reserved
[    0.276999] system 00:03: [io  0xffff] has been reserved
[    0.277001] system 00:03: [io  0x0400-0x047f] has been reserved
[    0.277004] system 00:03: [io  0x1180-0x11ff] has been reserved
[    0.277006] system 00:03: [io  0xfe00] has been reserved
[    0.277009] system 00:03: [io  0xff2c-0xff7f] has been reserved
[    0.277013] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277048] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.277088] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.277123] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.277267] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.277270] system 00:07: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.277273] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.277276] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.277278] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.277281] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.277284] system 00:07: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.277286] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.277290] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277419] pnp: PnP ACPI: found 8 devices
[    0.277421] ACPI: ACPI bus type pnp unregistered
[    0.284650] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff] to [bus 0e] add_size 400000
[    0.284663] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 14] add_size 1000
[    0.284666] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 14] add_size 200000
[    0.284678] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 20] add_size 1000
[    0.284682] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
[    0.284697] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[    0.284700] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.284702] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.284705] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.284708] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.284713] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0000000-0xc04fffff]
[    0.284717] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[    0.284720] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.284724] pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]
[    0.284727] pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
[    0.284730] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0900000-0xc09000ff 64bit]
[    0.284746] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[    0.284748] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.284751] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.284755] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.284758] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.284763] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.284767] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.284773] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.284778] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.284787] pci 0000:0e:00.0: BAR 6: assigned [mem 0xf2020000-0xf203ffff pref]
[    0.284789] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[    0.284792] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.284799] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc04fffff]
[    0.284804] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[    0.284811] pci 0000:00:1c.3: PCI bridge to [bus 14]
[    0.284815] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.284821] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.284826] pci 0000:00:1c.3:   bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[    0.284834] pci 0000:00:1c.5: PCI bridge to [bus 20]
[    0.284838] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
[    0.284844] pci 0000:00:1c.5:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.284849] pci 0000:00:1c.5:   bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.284857] pci 0000:00:1e.0: PCI bridge to [bus 26]
[    0.284917] pci 0000:00:1e.0: setting latency timer to 64
[    0.284922] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.284924] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.284927] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.284929] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.284931] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff]
[    0.284934] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.284936] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[    0.284939] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.284941] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.284944] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.284946] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.284949] pci_bus 0000:0e: resource 0 [io  0x4000-0x4fff]
[    0.284951] pci_bus 0000:0e: resource 1 [mem 0xc0000000-0xc04fffff]
[    0.284954] pci_bus 0000:0e: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[    0.284956] pci_bus 0000:14: resource 0 [io  0x5000-0x5fff]
[    0.284958] pci_bus 0000:14: resource 1 [mem 0xf2100000-0xf21fffff]
[    0.284961] pci_bus 0000:14: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[    0.284963] pci_bus 0000:20: resource 0 [io  0x6000-0x6fff]
[    0.284966] pci_bus 0000:20: resource 1 [mem 0xf2200000-0xf22fffff]
[    0.284968] pci_bus 0000:20: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.284971] pci_bus 0000:26: resource 4 [io  0x0000-0x0cf7]
[    0.284973] pci_bus 0000:26: resource 5 [io  0x0d00-0xffff]
[    0.284975] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[    0.284978] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.284980] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xfebfffff]
[    0.285019] NET: Registered protocol family 2
[    0.285214] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.285463] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.285664] TCP: Hash tables configured (established 32768 bind 32768)
[    0.285712] TCP: reno registered
[    0.285722] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.285755] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.285836] NET: Registered protocol family 1
[    0.286083] pci 0000:01:00.0: Boot video device
[    0.286112] PCI: CLS 64 bytes, default 64
[    0.286162] Unpacking initramfs...
[    0.350092] Freeing initrd memory: 2896k freed
[    0.351079] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.351084] software IO TLB [mem 0xbb8b1000-0xbf8b1000] (64MB) mapped at [ffff8800bb8b1000-ffff8800bf8b0fff]
[    0.351110] Simple Boot Flag at 0x36 set to 0x1
[    0.351476] audit: initializing netlink socket (disabled)
[    0.351500] type=2000 audit(1367834697.349:1): initialized
[    0.364261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.366234] VFS: Disk quotas dquot_6.5.2
[    0.366287] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.366488] msgmni has been set to 7901
[    0.366762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.366791] io scheduler noop registered
[    0.366793] io scheduler deadline registered
[    0.366806] io scheduler cfq registered (default)
[    0.366943] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.367041] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.367166] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.367289] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.367413] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[    0.367589] intel_idle: does not run on family 6 model 23
[    0.367624] GHES: HEST is not enabled!
[    0.367681] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.368175] Linux agpgart interface v0.103
[    0.368251] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.399018] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.399062] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.399179] mousedev: PS/2 mouse device common for all mice
[    0.401051] rtc_cmos 00:04: RTC can wake from S4
[    0.401195] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.401225] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.401233] cpuidle: using governor ladder
[    0.401235] cpuidle: using governor menu
[    0.401237] EFI Variables Facility v0.08 2004-May-17
[    0.401286] drop_monitor: Initializing network drop monitor service
[    0.401359] TCP: cubic registered
[    0.401473] NET: Registered protocol family 10
[    0.401636] NET: Registered protocol family 17
[    0.401646] Key type dns_resolver registered
[    0.401877] PM: Hibernation image not present or could not be loaded.
[    0.401892] registered taskstats version 1
[    0.402704]   Magic number: 13:16:72
[    0.402786] rtc_cmos 00:04: setting system clock to 2013-05-06 10:04:58 UTC (1367834698)
[    0.404388] Freeing unused kernel memory: 820k freed
[    0.404612] Write protecting the kernel read-only data: 8192k
[    0.408310] Freeing unused kernel memory: 1224k freed
[    0.409965] Freeing unused kernel memory: 440k freed
[    0.417528] systemd-udevd[46]: starting version 202
[    0.428060] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.447476] ACPI: bus type usb registered
[    0.447506] usbcore: registered new interface driver usbfs
[    0.447521] usbcore: registered new interface driver hub
[    0.449553] usbcore: registered new device driver usb
[    0.450039] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.450187] ehci-pci: EHCI PCI platform driver
[    0.450244] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.450248] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.450256] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.450276] ehci-pci 0000:00:1a.7: debug port 1
[    0.450380] uhci_hcd: USB Universal Host Controller Interface driver
[    0.453482] sdhci: Secure Digital Host Controller Interface driver
[    0.453485] sdhci: Copyright(c) Pierre Ossman
[    0.453710] sdhci-pci 0000:20:00.1: SDHCI controller found [197b:2382] (rev 0)
[    0.454492] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.454510] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf2504800
[    0.457628] SCSI subsystem initialized
[    0.459089] ACPI: bus type scsi registered
[    0.459181] libata version 3.00 loaded.
[    0.463365] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.463520] hub 1-0:1.0: USB hub found
[    0.463525] hub 1-0:1.0: 6 ports detected
[    0.463706] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.463710] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.463717] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.463732] ehci-pci 0000:00:1d.7: debug port 1
[    0.467637] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.467658] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2504c00
[    0.476688] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.476807] hub 2-0:1.0: USB hub found
[    0.476811] hub 2-0:1.0: 6 ports detected
[    0.476974] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.476978] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.476984] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.477026] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.477197] hub 3-0:1.0: USB hub found
[    0.477202] hub 3-0:1.0: 2 ports detected
[    0.477301] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.477305] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.477311] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.477346] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.477479] hub 4-0:1.0: USB hub found
[    0.477483] hub 4-0:1.0: 2 ports detected
[    0.477592] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.477596] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.477601] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.477627] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    0.477756] hub 5-0:1.0: USB hub found
[    0.477760] hub 5-0:1.0: 2 ports detected
[    0.477853] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.477857] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.477863] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.477888] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.478020] hub 6-0:1.0: USB hub found
[    0.478024] hub 6-0:1.0: 2 ports detected
[    0.478119] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.478123] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.478128] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.478154] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.478282] hub 7-0:1.0: USB hub found
[    0.478286] hub 7-0:1.0: 2 ports detected
[    0.478383] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.478386] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.478392] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.478427] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.478554] hub 8-0:1.0: USB hub found
[    0.478558] hub 8-0:1.0: 2 ports detected
[    0.478906] ahci 0000:00:1f.2: version 3.0
[    0.478972] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.479052] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.479055] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs 
[    0.479061] ahci 0000:00:1f.2: setting latency timer to 64
[    0.480031] mmc0: SDHCI controller on PCI [0000:20:00.1] using DMA
[    0.484532] sdhci-pci 0000:20:00.2: SDHCI controller found [197b:2381] (rev 0)
[    0.484696] sdhci-pci 0000:20:00.2: Refusing to bind to secondary interface.
[    0.484847] scsi0 : ahci
[    0.485516] scsi1 : ahci
[    0.485613] scsi2 : ahci
[    0.488220] scsi3 : ahci
[    0.489530] scsi4 : ahci
[    0.493160] scsi5 : ahci
[    0.493226] ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 45
[    0.493230] ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 45
[    0.493231] ata3: DUMMY
[    0.493233] ata4: DUMMY
[    0.493236] ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 45
[    0.493239] ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 45
[    0.543425] firewire_ohci 0000:20:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    0.770020] usb 1-6: new high-speed USB device number 2 using ehci-pci
[    0.810049] ata2: SATA link down (SStatus 0 SControl 300)
[    0.816726] ata6: SATA link down (SStatus 0 SControl 300)
[    0.976694] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.983362] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.984717] ata5.00: ATAPI: MATSHITADVD-RAM UJ880AS, 1.50, max UDMA/33
[    0.986535] ata5.00: configured for UDMA/33
[    1.034662] ata1.00: ATA-8: TOSHIBA MK5055GSX, FG001M, max UDMA/100
[    1.034665] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.035463] ata1.00: configured for UDMA/100
[    1.035587] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
[    1.037120] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ880AS  1.50 PQ: 0 ANSI: 5
[    1.039979] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.040045] sd 0:0:0:0: [sda] Write Protect is off
[    1.040048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.040068] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.041735] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.041738] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.041948] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.043434] firewire_core 0000:20:00.0: created device fw0: GUID 00023f92e0415085, S400
[    1.115105]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.115550] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.353352] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[    1.353358] Switching to clocksource tsc
[    1.676625] Btrfs loaded
[    1.677101] device fsid aae79978-7ec8-4e8d-9897-886883aa3617 devid 1 transid 53834 /dev/sda3
[    3.260100] device fsid aae79978-7ec8-4e8d-9897-886883aa3617 devid 1 transid 53834 /dev/sda3
[    3.260701] btrfs: disk space caching is enabled
[    4.702529] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    4.728742] systemd[1]: Set hostname to <C40C04>.
[    6.317239] systemd[1]: Cannot add dependency job for unit oss.service, ignoring: Unit oss.service failed to load: No such file or directory. See system logs and 'systemctl status oss.service' for details.
[    6.317505] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.317568] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.317582] systemd[1]: Starting Login Prompts.
[    6.317992] systemd[1]: Reached target Login Prompts.
[    6.318002] systemd[1]: Starting Arch Daemons.
[    6.318379] systemd[1]: Reached target Arch Daemons.
[    6.318389] systemd[1]: Starting Remote File Systems.
[    6.318764] systemd[1]: Reached target Remote File Systems.
[    6.318776] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.319171] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.319181] systemd[1]: Starting Delayed Shutdown Socket.
[    6.319576] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.319586] systemd[1]: Starting LVM2 metadata daemon socket.
[    6.319985] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.319996] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    6.320399] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.320412] systemd[1]: Starting Journal Socket.
[    6.320827] systemd[1]: Listening on Journal Socket.
[    6.352840] systemd[1]: Starting Apply Kernel Variables...
[    6.363599] systemd[1]: Starting Journal Service...
[    6.377184] systemd[1]: Started Journal Service.
[    6.377225] systemd[1]: Starting Setup Virtual Console...
[    6.471508] systemd[1]: Mounting Debug File System...
[    6.600092] systemd[1]: Started Load Kernel Modules.
[    6.600119] systemd[1]: Mounted FUSE Control File System.
[    6.600182] systemd[1]: Starting udev Kernel Socket.
[    6.600578] systemd[1]: Listening on udev Kernel Socket.
[    6.600636] systemd[1]: Starting udev Control Socket.
[    6.601019] systemd[1]: Listening on udev Control Socket.
[    6.601077] systemd[1]: Starting udev Coldplug all Devices...
[    6.606810] systemd[1]: Starting Create static device nodes in /dev...
[    6.612093] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.612575] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.734054] systemd[1]: Starting Set Up Additional Binary Formats...
[    6.738470] systemd[1]: Mounting POSIX Message Queue File System...
[    6.746840] systemd[1]: Mounting Configuration File System...
[    6.753429] systemd[1]: Mounting Huge Pages File System...
[    6.769033] systemd[1]: Starting Encrypted Volumes.
[    6.769411] systemd[1]: Reached target Encrypted Volumes.
[    6.769431] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.769493] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.769509] systemd[1]: Starting Paths.
[    6.769887] systemd[1]: Reached target Paths.
[    6.769902] systemd[1]: Starting Swap.
[    6.770268] systemd[1]: Reached target Swap.
[    6.770283] systemd[1]: Mounting Temporary Directory...
[    6.781569] systemd[1]: Starting File System Check on Root Device...
[    6.783456] systemd[1]: Expecting device dev-disk-by\x2duuid-04f44282\x2df22a\x2d428f\x2d9c98\x2d523c06794d90.device...
[    6.783725] systemd[1]: Expecting device dev-disk-by\x2duuid-90a74731\x2da332\x2d4ebe\x2d8edc\x2df77d8fb5e43b.device...
[    6.787067] systemd[1]: Started Apply Kernel Variables.
[    7.213250] systemd-udevd[138]: starting version 202
[    7.683597] btrfs: disk space caching is enabled
[    8.610014] ACPI: Requesting acpi_cpufreq
[    8.754201] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    8.754243] ACPI: Lid Switch [LID0]
[    8.754297] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.754301] ACPI: Power Button [PWRB]
[    8.833329] acpi device:03: registered as cooling_device0
[    8.833593] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.833645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3
[    8.866707] ACPI: AC Adapter [ACAD] (off-line)
[    8.890342] Monitor-Mwait will be used to enter C-1 state
[    8.890350] Monitor-Mwait will be used to enter C-2 state
[    8.890354] Monitor-Mwait will be used to enter C-3 state
[    8.890358] tsc: Marking TSC unstable due to TSC halts in idle
[    8.890375] ACPI: acpi_idle registered with cpuidle
[    8.890395] Switching to clocksource hpet
[    8.891585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.891625] ACPI: Power Button [PWRF]
[    8.937174] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    8.990285] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    9.001783] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    9.001840] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    9.003739] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    9.003836] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[    9.036412] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[    9.040381] ACPI: Battery Slot [BAT1] (battery present)
[    9.347872] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    9.595493] cfg80211: Calling CRDA to update world regulatory domain
[    9.595644] wmi: Mapper loaded
[    9.603496] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[    9.603503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.603508] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    9.603512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.603513] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    9.603517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.603519] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.895786] iTCO_vendor_support: vendor-support=0
[    9.916585] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[    9.916660] input: Toshiba input device as /devices/virtual/input/input10
[    9.921691] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[    9.921698] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.942035] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    9.943765] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    9.944206] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.948495] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    9.948498] Copyright(c) 2003-2012 Intel Corporation
[    9.948656] iwlwifi 0000:14:00.0: irq 48 for MSI/MSI-X
[    9.953773] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[   10.011952] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[   10.013297] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.047394] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.047633] r8169 0000:0e:00.0: irq 49 for MSI/MSI-X
[   10.047813] r8169 0000:0e:00.0 eth0: RTL8102e at 0xffffc90000656000, 00:23:5a:06:7a:2b, XID 14a00000 IRQ 49
[   10.088393] iwlwifi 0000:14:00.0: loaded firmware version 8.83.5.1 build 33692
[   10.120291] [drm] Initialized drm 1.1.0 20060810
[   10.265160] media: Linux media interface: v0.10
[   10.269267] Linux video capture interface: v2.00
[   10.516470] iwlwifi 0000:14:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   10.516475] iwlwifi 0000:14:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   10.516477] iwlwifi 0000:14:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   10.516480] iwlwifi 0000:14:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[   10.516482] iwlwifi 0000:14:00.0: CONFIG_IWLWIFI_P2P disabled
[   10.516484] iwlwifi 0000:14:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   10.516549] iwlwifi 0000:14:00.0: L1 Disabled; Enabling L0S
[   10.516931] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[   10.527934] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[   10.531238] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input11
[   10.531529] usbcore: registered new interface driver uvcvideo
[   10.531531] USB Video Class driver (1.1.1)
[   10.572772] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   10.701965] [drm] radeon defaulting to kernel modesetting.
[   10.701968] [drm] radeon kernel modesetting enabled.
[   10.702240] [drm] initializing kernel modesetting (RV620 0x1002:0x95C4 0x1179:0xFF01).
[   10.702294] [drm] register mmio base: 0xCFEF0000
[   10.702295] [drm] register mmio size: 65536
[   10.702413] ATOM BIOS: TOS_LA_M82M_XT_DDR2
[   10.702441] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[   10.702444] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[   10.704667] [drm] Detected VRAM RAM=256M, BAR=256M
[   10.704671] [drm] RAM width 64bits DDR
[   10.704729] [TTM] Zone  kernel: Available graphics memory: 2024120 kiB
[   10.704732] [TTM] Initializing pool allocator
[   10.704737] [TTM] Initializing DMA pool allocator
[   10.704761] [drm] radeon: 256M of VRAM memory ready
[   10.704763] [drm] radeon: 512M of GTT memory ready.
[   10.704788] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.704789] [drm] Driver supports precise vblank timestamp query.
[   10.704846] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
[   10.704859] radeon 0000:01:00.0: radeon: using MSI.
[   10.704895] [drm] radeon: irq initialized.
[   10.704900] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.705576] [drm] probing gen 2 caps for device 8086:2a41 = 1/0
[   10.705632] [drm] Loading RV620 Microcode
[   10.773418] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input12
[   10.795587] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   10.795646] radeon 0000:01:00.0: WB enabled
[   10.795651] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8801350cfc00
[   10.795653] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff8801350cfc0c
[   10.821085] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input13
[   10.834005] [drm] ring test on 0 succeeded in 1 usecs
[   10.834065] [drm] ring test on 3 succeeded in 1 usecs
[   10.834466] [drm] ib test on ring 0 succeeded in 0 usecs
[   10.834480] [drm] ib test on ring 3 succeeded in 0 usecs
[   10.856709] [drm] radeon atom DIG backlight initialized
[   10.856713] [drm] Radeon Display Connectors
[   10.856715] [drm] Connector 0:
[   10.856717] [drm]   VGA-1
[   10.856720] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   10.856722] [drm]   Encoders:
[   10.856724] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   10.856726] [drm] Connector 1:
[   10.856728] [drm]   LVDS-1
[   10.856730] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[   10.856732] [drm]   Encoders:
[   10.856734] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[   10.856736] [drm] Connector 2:
[   10.856738] [drm]   HDMI-A-1
[   10.856739] [drm]   HPD1
[   10.856742] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   10.856744] [drm]   Encoders:
[   10.856745] [drm]     DFP1: INTERNAL_UNIPHY
[   10.856747] [drm] Connector 3:
[   10.856749] [drm]   DIN-1
[   10.856751] [drm]   Encoders:
[   10.856752] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[   10.856806] [drm] radeon: power management initialized
[   11.374313] device fsid aae79978-7ec8-4e8d-9897-886883aa3617 devid 1 transid 53834 /dev/sda3
[   11.846262] [drm] fb mappable at 0xD0142000
[   11.846265] [drm] vram apper at 0xD0000000
[   11.846267] [drm] size 4325376
[   11.846268] [drm] fb depth is 24
[   11.846270] [drm]    pitch is 5632
[   11.846363] fbcon: radeondrmfb (fb0) is primary device
[   12.108922] Console: switching to colour frame buffer device 170x48
[   12.112216] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   12.112219] radeon 0000:01:00.0: registered panic notifier
[   12.112349] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[   12.651286] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[   12.783170] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[   21.001255] r8169 0000:0e:00.0 eth0: link down
[   21.001284] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.061545] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[   33.063301] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
[   33.913624] systemd-journald[121]: File /var/log/journal/26cc33a955d34203a828654e017313f0/user-120.journal corrupted or uncleanly shut down, renaming and replacing.
[  195.542205] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[  195.543785] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
[  207.525319] fuse init (API version 7.20)
[  216.678296] ata5.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[  216.678301] ata5.00: irq_stat 0x08000000, interface fatal error
[  216.678304] ata5: SError: { Proto }
[  216.678309] sr 4:0:0:0: [sr0] CDB: 
[  216.678311] cdb[0]=0x43: 43 02 05 00 00 00 00 00 02 00 00 00
[  216.678322] ata5.00: cmd a0/00:00:00:02:00/00:00:00:00:00/a0 tag 0 pio 16388 in
         res 50/00:03:00:04:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[  216.678325] ata5.00: status: { DRDY }
[  216.678330] ata5: hard resetting link
[  217.163362] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  217.166405] ata5.00: configured for UDMA/33
[  217.166973] ata5: EH complete
[  226.055846] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.055963] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.056051] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.056729] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.056800] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.056862] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057062] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057186] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057264] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057374] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057685] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057721] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057743] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057782] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.057853] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.058008] iwlwifi 0000:14:00.0: RF_KILL bit toggled to enable radio.
[  226.058246] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.059888] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.060235] iwlwifi 0000:14:00.0: RF_KILL bit toggled to enable radio.
[  226.060262] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.063019] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.063135] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.063200] iwlwifi 0000:14:00.0: RF_KILL bit toggled to enable radio.
[  226.063226] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.063478] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.064043] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.064205] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.065115] iwlwifi 0000:14:00.0: RF_KILL bit toggled to disable radio.
[  226.235120] iwlwifi 0000:14:00.0: RF_KILL bit toggled to enable radio.
[  226.236040] iwlwifi 0000:14:00.0: L1 Disabled; Enabling L0S
[  226.239043] iwlwifi 0000:14:00.0: Radio type=0x1-0x2-0x0
[  226.436278] iwlwifi 0000:14:00.0: L1 Disabled; Enabling L0S
[  226.439294] iwlwifi 0000:14:00.0: Radio type=0x1-0x2-0x0
[  226.578375] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  233.079313] wlan0: authenticate with 24:db:ac:bc:b5:4d
[  233.081540] wlan0: send auth to 24:db:ac:bc:b5:4d (try 1/3)
[  233.083866] wlan0: authenticated
[  233.086885] wlan0: associate with 24:db:ac:bc:b5:4d (try 1/3)
[  233.090024] wlan0: RX AssocResp from 24:db:ac:bc:b5:4d (capab=0x431 status=0 aid=1)
[  233.091459] wlan0: associated
[  233.091495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  724.992308] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
Shingo
archer de cavalerie
Messages : 151
Inscription : dim. 03 févr. 2013, 19:06

Re: [en cours] Problème de son (totem et alsa)

Message par Shingo »

As-tu essayé d'installer la version git de totem ? Je ne sais pas si cela va résoudre ton problème mais j'ai rencontré plus ou moins le même problème avec Parole. Impossible de lire quoi que se soit malgré l'installation de tout les codecs. J'ai fini par installer parole-git et tout est rentré dans l'ordre.
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [en cours] Problème de son (serveurs de son)

Message par Caocoa »

Salut ! Je déterre ce sujet après plus de deux mois. Le [en cours] du titre est toujours d'actualité :p

J'ai refais un essai avec totem, et du coup j'ai ce message d'erreur instructif :

Code : Tout sélectionner

[caocoa@C40C04 Disque 1]$ mplayer Track\ 1.wav 
MPlayer SVN-r36285-4.8.0 (C) 2000-2013 MPlayer Team
205 audio & 424 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing Track 1.wav.
libavformat version 55.7.100 (internal)
Audio only file format detected.
Load subtitles in ./
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 2 ch, s16le, 1411.2 kbit/100.00% (ratio: 176400->176400)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
[AO_ALSA] Playback open error: No such file or directory
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
AO: [pulse] Init failed: Connection refused
[JACK] cannot open server
[AO SDL] Samplerate: 44100Hz Channels: Stereo Format s16le
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
[AO SDL] Unable to open audio: No available audio device
DVB card number must be between 1 and 4
AO: [null] 44100Hz 2ch s16le (2 bytes per sample)
Video: no video

A: 355.8 (05:55.8) of 355.0 (05:55.0)  0.0% 
Audio output truncated at end.
A: 355.9 (05:55.8) of 355.0 (05:55.0)  0.0% 


Exiting... (End of file)
Du coup j'ai plusieurs questions.

Code : Tout sélectionner

mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Je suppose que le socket en question est pour l'infrarouge. Lirc est effectivement installé sur mon pc mais je ne m'en sers pas, je vais le laisser : ça n'a pas l'air très méchant, et ça peut toujours servir.

Suivent un nombre considérable de message d'erreur : visiblement, totem se fait jeter par tout le monde et finit par rediriger le son vers null, qui lui ne lui dit rien (et pour cause :) ). J'ai regardé un peu les sorties son que j'avais, et j'ai trouvé ça :

Code : Tout sélectionner

[caocoa@C40C04 ~]$ mplayer -ao help
MPlayer SVN-r36285-4.8.0 (C) 2000-2013 MPlayer Team
205 audio & 424 video codecs
Available audio output drivers:
	oss	OSS/ioctl audio output
	alsa	ALSA-0.9.x-1.x audio output
	pulse	PulseAudio audio output
	jack	JACK audio output
	sdl	SDLlib audio output
	mpegpes	DVB audio output
	v4l2	V4L2 MPEG Audio Decoder output
	null	Null audio output
	pcm	RAW PCM/WAVE file writer audio output
J'ai deux remarques :
  • Est-il bien nécessaire d'avoir tant de sorties disponibles ?
  • Pourquoi aucune ne marche-t-elle ?
Autre chose bizarre, je ne peux pas lire de son en local (ni CD, ni fichier sur mon disque dur) mais je peux sans problème regarder des vidéos sur youtube avec le son.

Code : Tout sélectionner

[caocoa@C40C04 ~]$ pavucontrol 
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
[caocoa@C40C04 ~]$ pulseaudio --start
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Donc pulseaudio n'est pas lancé. Ca explique qu'il ne réponde pas. Mais d'après la doc :
  • Pulseaudio requires D-Bus to function.
  • Most X11 environments start pulseaudio automatically with the X11 session.
Je suis donc allé voir le journal pour voir ce qu'il se passait :

Code : Tout sélectionner

[caocoa@C40C04 ~]$ journalctl -b --no-pager -o cat
Error was encountered while opening journal files: Aucune donnée disponible
/etc/gdm/Xsession: Beginning session setup...
localuser:caocoa being added to access control list
/etc/gdm/Xsession: ssh-agent not found!
/etc/gdm/Xsession: Setup done, will execute: gnome-session
gnome-session[498]: WARNING: Could not parse desktop file audio-recorder.desktop or it references a not found TryExec binary
WARNING: Could not parse desktop file audio-recorder.desktop or it references a not found TryExec binary
Gkm: using old keyring directory: /home/caocoa/.gnome2/keyrings
Gkm: using old keyring directory: /home/caocoa/.gnome2/keyrings
gnome-session[498]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal 11
WARNING: Application 'gnome-settings-daemon.desktop' killed by signal 11
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TYDZjL
GPG_AGENT_INFO=/run/user/1000/keyring-TYDZjL/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TYDZjL
GPG_AGENT_INFO=/run/user/1000/keyring-TYDZjL/gpg:0:1
SSH_AUTH_SOCK=/run/user/1000/keyring-TYDZjL/ssh
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TYDZjL
GPG_AGENT_INFO=/run/user/1000/keyring-TYDZjL/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TYDZjL
GPG_AGENT_INFO=/run/user/1000/keyring-TYDZjL/gpg:0:1
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
gnome-session[498]: WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
Unrecoverable failure in required component gnome-settings-daemon.desktop
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
(gnome-shell:549): Gvc-WARNING **: Failed to connect context: Connexion refusée
keyring alias directory: /home/caocoa/.gnome2/keyrings
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Failed to play sound: Not available
Entering running state
JS LOG: GNOME Shell started at Tue Jul 16 2013 15:49:19 GMT+0200 (CEST)
** Message: applet now removed from the notification area
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
** Message: applet now embedded in the notification area
JS LOG: loading default theme (Adwaita)
** (gsynaptics-init:616): WARNING **: Using synclient
goa-daemon version 3.8.2 starting [main.c:113, main()]
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Avertissement du gestionnaire de fenêtres : Log level 8: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-shell:549): Gvc-WARNING **: Failed to connect context: Connexion refusée
** (evince:615): WARNING **: Erreur lors de l'obtention des informations du fichier « /home/caocoa/Documents/(Piano || Musique) && (G || sco)Welcome.pdf » : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:615): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
/org/gnome/OnlineAccounts/Accounts/account_1319289231: Setting AttentionNeeded to TRUE because EnsureCredentials() failed with: No credentials found in the keyring (goa-error-quark, 4) [goadaemon.c:1087, ensure_credentials_cb()]
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
(tracker-store:609): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
(tracker-miner-fs:621): Tracker-WARNING **: The maximum number of monitors to set (7692) has been reached, not adding any new ones
/etc/gdm/Xsession: Beginning session setup...
localuser:caocoa being added to access control list
/etc/gdm/Xsession: ssh-agent not found!
/etc/gdm/Xsession: Setup done, will execute: gnome-session
gnome-session[907]: WARNING: Could not parse desktop file audio-recorder.desktop or it references a not found TryExec binary
WARNING: Could not parse desktop file audio-recorder.desktop or it references a not found TryExec binary
Gkm: using old keyring directory: /home/caocoa/.gnome2/keyrings
Gkm: using old keyring directory: /home/caocoa/.gnome2/keyrings
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-iqoGOh
GPG_AGENT_INFO=/run/user/1000/keyring-iqoGOh/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-iqoGOh
GPG_AGENT_INFO=/run/user/1000/keyring-iqoGOh/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-iqoGOh
GPG_AGENT_INFO=/run/user/1000/keyring-iqoGOh/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-iqoGOh
GPG_AGENT_INFO=/run/user/1000/keyring-iqoGOh/gpg:0:1
SSH_AUTH_SOCK=/run/user/1000/keyring-iqoGOh/ssh
gnome-session[907]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal 11
WARNING: Application 'gnome-settings-daemon.desktop' killed by signal 11
gnome-session[907]: WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
Unrecoverable failure in required component gnome-settings-daemon.desktop
/etc/gdm/Xsession: Beginning session setup...
localuser:caocoa being added to access control list
/etc/gdm/Xsession: ssh-agent not found!
/etc/gdm/Xsession: Setup done, will execute: gnome-session
gnome-session[1078]: WARNING: Could not parse desktop file audio-recorder.desktop or it references a not found TryExec binary
WARNING: Could not parse desktop file audio-recorder.desktop or it references a not found TryExec binary
Gkm: using old keyring directory: /home/caocoa/.gnome2/keyrings
Gkm: using old keyring directory: /home/caocoa/.gnome2/keyrings
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-88ydDh
GPG_AGENT_INFO=/run/user/1000/keyring-88ydDh/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-88ydDh
GPG_AGENT_INFO=/run/user/1000/keyring-88ydDh/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-88ydDh
GPG_AGENT_INFO=/run/user/1000/keyring-88ydDh/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-88ydDh
GPG_AGENT_INFO=/run/user/1000/keyring-88ydDh/gpg:0:1
SSH_AUTH_SOCK=/run/user/1000/keyring-88ydDh/ssh
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
(gnome-settings-daemon:1119): Gvc-WARNING **: Failed to connect context: Connexion refusée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
(gnome-shell:1140): Gvc-WARNING **: Failed to connect context: Connexion refusée
goa-daemon version 3.8.2 starting [main.c:113, main()]
keyring alias directory: /home/caocoa/.gnome2/keyrings
Entering running state
JS LOG: GNOME Shell started at Tue Jul 16 2013 15:56:32 GMT+0200 (CEST)
** (gsynaptics-init:1233): WARNING **: Using synclient
** Message: applet now removed from the notification area
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Failed to play sound: Not available
** (evince:1232): WARNING **: Erreur lors de l'obtention des informations du fichier « /home/caocoa/Documents/(Piano || Musique) && (G || sco)Welcome.pdf » : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
** (evince:1232): WARNING **: Erreur lors de la définition des métadonnées du fichier : Aucun fichier ou dossier de ce type
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
/org/gnome/OnlineAccounts/Accounts/account_1319289231: Setting AttentionNeeded to TRUE because EnsureCredentials() failed with: No credentials found in the keyring (goa-error-quark, 4) [goadaemon.c:1087, ensure_credentials_cb()]
** Message: applet now embedded in the notification area
JS LOG: loading default theme (Adwaita)
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
(gnome-settings-daemon:1119): Gvc-WARNING **: Failed to connect context: Connexion refusée
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
secret_password_lookup_sync() returned NULL [goautils.c:210, goa_utils_lookup_credentials_sync()]
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Avertissement du gestionnaire de fenêtres : Log level 8: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-shell:1140): Gvc-WARNING **: Failed to connect context: Connexion refusée
(tracker-miner-fs:1236): Tracker-WARNING **: The maximum number of monitors to set (7692) has been reached, not adding any new ones
(process:1425): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
No bp log location saved, using default.
[000:000] Browser XEmbed support present: 1
[000:000] Browser toolkit is Gtk2.
[000:000] Using Gtk2 toolkit
[000:025] Starting client channel.
[000:025] Warning(clientchannel.cc:436): Unreadable or no port file.  Could not initiate GoogleTalkPlugin connection
[000:026] Warning(clientchannel.cc:411): Could not initiate GoogleTalkPlugin connection
[000:026] GoogleTalkPlugin not running. Starting new process...
[000:026] Warning(pluginutils.cc:251): Failed to get GoogleTalkPlugin path. Trying default.
[000:028] Started GoogleTalkPlugin, path=/opt/google/talkplugin/GoogleTalkPlugin
[000:029] Waiting for GoogleTalkPlugin to start...
[001:104] Attempting to connect to GoogleTalkPlugin...
[001:104] Warning(clientchannel.cc:436): Unreadable or no port file.  Could not initiate GoogleTalkPlugin connection
[001:120] Warning(clientchannel.cc:411): Could not initiate GoogleTalkPlugin connection
[001:121] Waiting for GoogleTalkPlugin to start...
[002:207] Attempting to connect to GoogleTalkPlugin...
[002:207] Read port file, port=42288
[002:209] Initiated connection to GoogleTalkPlugin
[002:309] Socket connection established
[002:310] ScheduleOnlineCheck: Online check in 5000ms
[002:409] Got cookie response, socket is authorized
[002:409] AUTHORIZED; socket handshake complete
[002:414] F->C: ["fs",{"pr":"a"}]
[002:509] F->C: ["mf",
	"mf3.19",
	"3.19.1.0",2,{"audioCodecs":[[103,"ISAC",1,0,16000],[104,"ISAC",1,0,32000],[9,"G722",1,64000,16000],[102,"ILBC",1,13300,8000],[0,"PCMU",1,64000,8000],[8,"PCMA",1,64000,8000],[107,"CN",1,0,48000],[106,"CN",1,0,32000],[105,"CN",1,0,16000],[13,"CN",1,0,8000],[127,"red",1,0,8000],[126,"telephone-event",1,0,8000]],"audioRtpHdrExts":[{"id":1,"uri":"urn:ietf:params:rtp-hdrext:ssrc-audio-level"}],"camDeviceName":"Chicony USB 2.0 Camera",
	"caps":15,"cpuArchitecture":1,"cpuCacheSize":3145728,"cpuFamily":6,"cpuFlags":["sse2",
	"ssse3",
	"sse4_1"],"cpuHasSSE2":true,"cpuModel":23,"cpuSpeed":2133,"cpuStepping":6,"cpuVendor":"GenuineIntel",
	"cpus":2,"cpusPhysical":2,"cryptoSuites":["AES_CM_128_HMAC_SHA1_80",
	"AES_CM_128_HMAC_SHA1_32"],"dataChannelVersion":1,"effectsVersion":10,"gpuDescription":"",
	"gpuDeviceId":0,"gpuDeviceName":"",
	"gpuDriver":"",
	"gpuDriverVersion":"",
	"gpuVendorId":0,"machineModel":"Not available",
	"remotingAssistanceAllowed":0,"remotingVersion":1,"renderer":2,"rtcpMux":true,"screencast":2,"screencastLocalPreview":1,"supportsConcurrentSessions":true,"transports":["i",
	"gice"],"videoCodecs":[[99,"H264-SVC",640,360,30],[97,"H264",640,360,30],[98,"H263",640,360,30]],"videoRtpHdrExts":[{"id":2,"uri":"urn:ietf:params:rtp-hdrext:toffset"}]}]
[002:610] F->C: ["getdevicestate","15","0",["__default_device",
	"HDA Intel,ALC272 Analog - Default Audio Device","HDA Intel, ALC272 Analog - Front speakers",
	"HDA Intel, ALC272 Analog - 4.0 Surround output to Front and Rear speakers",
	"HDA Intel, ALC272 Analog - 4.1 Surround output to Front, Rear and Subwoofer speakers",
	"HDA Intel, ALC272 Analog - 5.0 Surround output to Front, Center and Rear speakers",
	"HDA Intel, ALC272 Analog - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers",
	"HDA Intel, ALC272 Analog - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers"],"0",["__default_device",
	"HDA Intel, ALC272 Analog - Default Audio Device","HDA Intel, ALC272 Analog - Front speakers",
	"HDA Intel, ALC272 Analog - 4.0 Surround output to Front and Rear speakers",
	"HDA Intel, ALC272 Analog - 4.1 Surround output to Front, Rear and Subwoofer speakers",
	"HDA Intel, ALC272 Analog - 5.0 Surround output to Front, Center and Rear speakers",
	"HDA Intel, ALC272 Analog - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers",
	"HDA Intel, ALC272 Analog - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers",
	"HDA Intel, ALC272 Digital - IEC958 (S/PDIF) Digital Audio Output","HDA ATI HDMI, HDMI 0 - HDMI Audio Output"],
	"0",
	["Chicony USB 2.0 Camera"]]
[007:325] HandleOnlineCheck: Starting check
[007:325] HandleOnlineCheck: OK; current state: 3
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
(to caocoa) caocoa on none
pam_unix(su:session): session opened for user root by caocoa(uid=1000)
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
pam_unix(su:session): session closed for user root
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
(to caocoa) caocoa on none
pam_unix(su:session): session opened for user root by caocoa(uid=1000)
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Entre autres erreurs (qui seront pour d'autres sujets) on y voit pas mal de problème de son.

Voilà, je ne sais pas vous pouvez m'aider avec toutes ces infos. Je vous serais très reconnaissant de l'aide que vous pourriez m'apporter.
Dernière modification par Caocoa le mar. 16 juil. 2013, 21:47, modifié 1 fois.
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10707
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [serveurs de son] Problème de son

Message par FoolEcho »

Caocoa a écrit :Donc pulseaudio ne soit pas lancé. Ca explique qu'il ne réponde pas.
Ce qui me vient et que tu aurais fait maladroitement mumuse avec su (su -, avec tiret donc, préserve les permissions ; su seul, non, risquant de pourrir ton home). Vérifie les permissions sur le fichier indiqué (voir même sur ton HOME) et rétablis les droits corrects avec chown (cf. sujets chown/user/root).
«The following statement is not true. The previous statement is true.» :nage:
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [serveurs de son] Problème de son

Message par Caocoa »

Merci de ta réponse :D Je ne connaissais pas su -. Maintenant j'utiliserai plutôt cette commande à l'avenir.
Je m'aperçois en lisant ta citation que j'ai fait une énorme faute de français ! Je la corrige rapidement.
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [serveurs de son] Problème de son

Message par Caocoa »

Ah, mauvaise nouvelle : le fichier n'existe pas.

Code : Tout sélectionner

[root@C40C04 ~]# chown caocoa /home/caocoa/.config/pulse/daemon.conf
chown: impossible d'accéder à « /home/caocoa/.config/pulse/daemon.conf »: Aucun fichier ou dossier de ce type
Du coup, faut-il que je désinstalle et réinstalle pulse ? :/
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10707
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [serveurs de son] Problème de son

Message par FoolEcho »

Essaie de nettoyer un peu en supprimant /tmp/pulse* et ~/.pulse*.
https://wiki.archlinux.org/index.php/Pu ... tup_failed
«The following statement is not true. The previous statement is true.» :nage:
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [serveurs de son] Problème de son

Message par Caocoa »

Merci de m'aider :)
J'ai suivi ce que dit de faire la doc, mais ce n'est pas très probant : ces fichiers/dossiers n'existent pas :-(

Code : Tout sélectionner

[caocoa@C40C04 ~]$ ls /tmp/pulse
ls: impossible d'accéder à /tmp/pulse: Aucun fichier ou dossier de ce type
[caocoa@C40C04 ~]$ ls /.pulse*
ls: impossible d'accéder à /.pulse*: Aucun fichier ou dossier de ce type
[caocoa@C40C04 ~]$ gedit ~/.pulse
[caocoa@C40C04 ~]$ rm -rf /tmp/pulse* ~/.pulse*
[caocoa@C40C04 ~]$ pulseaudio -k
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
[caocoa@C40C04 ~]$ su -
Mot de passe : 
[root@C40C04 ~]# chown caocoa /home/caocoa/.config/pulse//daemon.conf
chown: impossible d'accéder à « /home/caocoa/.config/pulse//daemon.conf »: Aucun fichier ou dossier de ce type
[root@C40C04 ~]# chown caocoa /home/caocoa/.config/pulse/daemon.conf
chown: impossible d'accéder à « /home/caocoa/.config/pulse/daemon.conf »: Aucun fichier ou dossier de ce type
[root@C40C04 ~]# déconnexion
En revanche, il y a une lueur d'espoir ! Pulseaudio se lance en root :

Code : Tout sélectionner

[caocoa@C40C04 ~]$ su -
Mot de passe : 
[root@C40C04 ~]# pulseaudio --start
W: [pulseaudio] main.c: Le programme n'est pas conçu pour être lancé en tant que root (sauf si --system est renseigné).
[root@C40C04 ~]# pulseaudio -k
[root@C40C04 ~]# déconnexion
[caocoa@C40C04 ~]$ pulseaudio --start
W: [pulseaudio] core-util.c: Failed to open configuration file '/home/caocoa/.config/pulse//daemon.conf': Permission non accordée
W: [pulseaudio] daemon-conf.c: Échec lors de l'ouverture du fichier de configuration : Permission non accordée
Donc ça prouve qu'il marche, qu'il est là et qu'il existe encore sur mon ordi :) Reste à comprendre pourquoi il ne veut pas se lancer pour un utilisateur lambda, et pourquoi il ne se lance pas au démarrage.
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10707
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [serveurs de son] Problème de son

Message par FoolEcho »

Tu as vérifié les permissions sur le reste de ton HOME ? As-tu le même problème avec un utilisateur test ?
«The following statement is not true. The previous statement is true.» :nage:
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [serveurs de son] Problème de son

Message par Caocoa »

/home/caocoa m'appartient bien, mais le groupe associé est 1000 et non caocoa :

Code : Tout sélectionner

[caocoa@C40C04 ~]$ ls -l /home/ | grep caocoa
drwx------ 123 caocoa   1000      20480 17 juil. 13:39 caocoa
Devrais-je changer ça avec chown caocoa:caocoa -R /home/caocoa/ ?

Edition
Je viens de tester avec un utilisateur à côté, tout marche super bien, et ça résout quelques autres problèmes que j'ai. Du coup, même si cela m'empêche de comprendre ces problèmes, je réfléchis vraiment à me créer une nouvelle session puis à tout basculer dessus : ça me simplifierais la vie :D
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10707
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [serveurs de son] Problème de son

Message par FoolEcho »

Il serait préférable que le groupe principal de ton utilisateur soit users et non caocoa.

Dans le doute, rajoute l'utilisateur à users et fait un chown sur caocoa:users.

Utilisateurs_et_Groupes

Sinon, effectivement, transvaser sur un autre compte (mais il est plus que probable que l'affichage des permissions soient aussi étranges).
Dernière modification par FoolEcho le jeu. 18 juil. 2013, 10:37, modifié 1 fois.
Raison : suppression d'une remarque fausse
«The following statement is not true. The previous statement is true.» :nage:
Avatar de l’utilisateur
benjarobin
Maître du Kyudo
Messages : 17187
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [serveurs de son] Problème de son

Message par benjarobin »

Non users c'est 100, 1000 correspond au groupe de l'utilisateur donc normalement caocoa... Je pense que certains fichiers de configuration ont été modifiés...
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10707
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [serveurs de son] Problème de son

Message par FoolEcho »

Exact. Je corrige. :oops:
«The following statement is not true. The previous statement is true.» :nage:
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [serveurs de son] Problème de son

Message par Caocoa »

Merci pour votre aide. Puisque vous m'aidez, je ne transvase pas (pour l'instant) mes documents sur un autre compte : ça me permettra de comprendre ce que j'ai mal fait. Voici mes goupes

Code : Tout sélectionner

[caocoa@C40C04 ~]$ cat /etc/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root
ftp:x:11:
mail:x:12:
uucp:x:14:
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:
video:x:91:
audio:x:92:caocoa
optical:x:93:
floppy:x:94:
storage:x:95:
scanner:x:96:
power:x:98:
nobody:x:99:
users:x:100:
polkitd:x:102:
usbmux:x:140:
avahi:x:84:
rtkit:x:133:
gdm:x:120:
brlapi:x:999:
vboxusers:x:108:
invite:x:1001:
git:x:998:
systemd-journal:x:190:
et mes utilisateurs. J'ai créé un compte invité, c'est avec lui que le son marche.

Code : Tout sélectionner

[caocoa@C40C04 ~]$ cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
uuidd:x:68:68:uuidd:/:/sbin/nologin
dbus:x:81:81:dbus:/:/sbin/nologin
nobody:x:99:99:nobody:/:/bin/false
caocoa:x:1000:100:Caocoa:/home/caocoa:/bin/bash
polkitd:x:102:102:Policy Kit Daemon:/:/bin/false
usbmux:x:140:140:usbmux user:/:/sbin/nologin
avahi:x:84:84:avahi:/:/bin/false
rtkit:x:133:133:RealtimeKit:/proc:/sbin/nologin
gdm:x:120:120:Gnome Display Manager:/var/lib/gdm:/sbin/nologin
invite:x:1001:1001:Invité:/home/invite:/bin/bash
git:x:999:998:git daemon user:/:/bin/bash
Tous ces utilisateurs et tous ces comptes sont vraiment nécessaires ? je ne pourrais pas en supprimer quelques un ?
D'autre part, il y a un truc que je trouve bizarre :

Code : Tout sélectionner

[caocoa@C40C04 ~]$ cat /etc/group | grep caocoa
audio:x:92:caocoa
Pourquoi le nom d'un utilisateur apparaît dans les groupes ?

Edition
Je vérifie que tout m'appartient bien dans mon répertoire personnel.

Code : Tout sélectionner

[caocoa@C40C04 ~]$ su -
Mot de passe : 
[root@C40C04 ~]# chown -R caocoa:users /home/caocoa
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
Avatar de l’utilisateur
Caocoa
yeomen
Messages : 208
Inscription : jeu. 11 nov. 2010, 16:19

Re: [serveurs de son] Problème de son

Message par Caocoa »

Et hop ! ça remarche :-) Merci beaucoup. Du coup j'ai édité le premier message.

Code : Tout sélectionner

[caocoa@C40C04 ~]$ rm -rf /tmp/pulse* ~/.pulse*
[caocoa@C40C04 ~]$ pulseaudio -k
E: [pulseaudio] main.c: Impossible de tuer le démon : Aucun processus de ce type
[caocoa@C40C04 ~]$ pulseaudio --start
J'ai vérifié, caocoa appartient bien à users :

Code : Tout sélectionner

[caocoa@C40C04 ~]$ groups caocoa
audio users
Linux un noyau, Windows des pépins :mrgreen: | Manifeste pour la liberté des programmeurs, par Bill Gates.
Ma configuration
MuscatLM
newbie
Messages : 1
Inscription : sam. 16 sept. 2023, 18:00

Re: [serveurs de son] Problème de son (résolu)

Message par MuscatLM »

Bonjour,
Effectivement cela fonctionne. Cela peut aider quelqu'un car j'ai beaucoup cherché avant cette solution.
J'étais sous Mageia 8 et j'ai eu quelque soucis car ma machine a 15 ans et tout à coup plus de son. Il fonctionnait toujours sous windows. Il y beaucoup de choses sur le weeb, mais rien n'a fonctionné.
Je suis passé sous Mageia9 et j'ai eu des messages concernant PulseAudio, mais sans pouvoir agir. Sans succès, toujours pas de son.
C'est cette commande en root: rm -rf /tmp/pulse* ~/.pulse* qui a débloqué. Car en suite et PAS en root: pulseaudio --start a permis de voir (pavucontrol) afficher quelque chose, il était de nouveau connecté à PulseAudio.
Il a fallut redémarrer pour que le son fonctionne. Ma question: j'espère que c'est bien cela?
Merci à "caocoa"!
Cdt
Répondre