[Intel] Xorg - mtrr error

Xorg, Compiz, KDE / Gnome / Xfce / Fluxbox / e17 / fvwm ... GDM/KDM/XDM...
Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

[Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 08:49

J'ai eu la bonne idée de mettre à jour ma station de travail au bureau ...
Moralité plus de X
Voici ma super carte graphique super géniale:

Code : Tout sélectionner

00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device 3011
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at e0400000 (32-bit, non-prefetchable) [size=512K]
	I/O ports at 10c0 [size=8]
	Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Memory at e0480000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
Mon user:

Code : Tout sélectionner

uid=1000(warnaud) gid=1000(warnaud) groups=1000(warnaud),10(wheel),91(video),92(audio),93(optical),94(floppy),95(storage),100(users)
Pour rigoler

Code : Tout sélectionner

sudo X -configure

X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.2-1-ARCH i686 
Current Operating System: Linux BaZ00k4 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:46:10 UTC 2012 i686
Kernel command line: root=/dev/sda1 ro vga=795 nomodeset
Build Date: 29 January 2012  03:41:53PM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 08:38:25 2012
List of video drivers:
	intel
	vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
  Configuration failed.
Server terminated with error (2). Closing log file.
Là on sent tout de suite que ça va bien se présenter ...
Le log X:

Code : Tout sélectionner

tail -2000  /var/log/Xorg.0.log
[   390.453] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[   390.453] X Protocol Version 11, Revision 0
[   390.453] Build Operating System: Linux 3.2.2-1-ARCH i686 
[   390.453] Current Operating System: Linux BaZ00k4 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:46:10 UTC 2012 i686
[   390.453] Kernel command line: root=/dev/sda1 ro vga=795 nomodeset
[   390.453] Build Date: 29 January 2012  03:41:53PM
[   390.453]  
[   390.453] Current version of pixman: 0.24.4
[   390.453] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   390.453] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   390.454] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 08:38:25 2012
[   390.454] (II) Loader magic: 0x8228580
[   390.454] (II) Module ABI versions:
[   390.454] 	X.Org ANSI C Emulation: 0.4
[   390.454] 	X.Org Video Driver: 11.0
[   390.454] 	X.Org XInput driver : 13.0
[   390.454] 	X.Org Server Extension : 6.0
[   390.455] (--) PCI:*(0:0:2:0) 8086:2772:103c:3011 rev 2, Mem @ 0xe0400000/524288, 0xd0000000/268435456, 0xe0480000/262144, I/O @ 0x000010c0/8
[   390.455] List of video drivers:
[   390.455] 	intel
[   390.455] 	vesa
[   390.456] (II) LoadModule: "intel"
[   390.456] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   390.456] (II) Module intel: vendor="X.Org Foundation"
[   390.456] 	compiled for 1.11.2, module version = 2.17.0
[   390.456] 	Module class: X.Org Video Driver
[   390.456] 	ABI class: X.Org Video Driver, version 11.0
[   390.456] (II) LoadModule: "vesa"
[   390.457] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   390.474] (II) Module vesa: vendor="X.Org Foundation"
[   390.474] 	compiled for 1.11.1, module version = 2.3.0
[   390.474] 	Module class: X.Org Video Driver
[   390.474] 	ABI class: X.Org Video Driver, version 11.0
[   390.474] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[   390.475] (II) VESA: driver for VESA chipsets: vesa
[   390.577] (++) Using config file: "/root/xorg.conf.new"
[   390.577] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   390.577] (==) ServerLayout "X.org Configured"
[   390.577] (**) |-->Screen "Screen0" (0)
[   390.577] (**) |   |-->Monitor "Monitor0"
[   390.577] (**) |   |-->Device "Card0"
[   390.577] (**) |-->Screen "Screen1" (1)
[   390.577] (**) |   |-->Monitor "Monitor1"
[   390.577] (**) |   |-->Device "Card1"
[   390.577] (**) |-->Input Device "Mouse0"
[   390.578] (**) |-->Input Device "Keyboard0"
[   390.578] (==) Automatically adding devices
[   390.578] (==) Automatically enabling devices
[   390.578] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   390.578] 	Entry deleted from font path.
[   390.578] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   390.578] 	Entry deleted from font path.
[   390.578] (**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   390.578] (**) ModulePath set to "/usr/lib/xorg/modules"
[   390.578] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   390.578] (WW) Disabling Mouse0
[   390.578] (WW) Disabling Keyboard0
[   390.580] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   390.580] Number of created screens does not match number of detected devices.
  Configuration failed.
Si je démarre en init 3 et que je fais un startx:

Code : Tout sélectionner

$ startx


X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.2-1-ARCH i686 
Current Operating System: Linux BaZ00k4 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:46:10 UTC 2012 i686
Kernel command line: root=/dev/sda1 ro vga=795 nomodeset
Build Date: 29 January 2012  03:41:53PM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 08:34:16 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Petite anecdote, avant j'avais une erreur au lancement il me demandait le package ... synaptics :bravo: (j'ai aucun touchpad ou autre ...)

Je me suis aussi amuser à faire un fichier /etc/X11/xorg.conf.d/20-intel.conf avec:

Code : Tout sélectionner

 Section "Device"
     Identifier "old intel stuff"
     Driver "intel"
     BusID  "PCI:0:2:0"
     Option "Shadow" "True"
     Option "DRI" "false"
     Option "AccelMethod" "UXA"
EndSection
Même sanction ...

Avant dans dmesg il y avait à chaque lancement de X une erreur mtrr ...

Une idée ?
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

Avatar de l’utilisateur
chipster
Maître du Kyudo
Messages : 2063
Inscription : ven. 11 août 2006, 22:25
Localisation : Saint-Étienne (42)
Contact :

Re: mtrr error - Xorg et Intel

Message par chipster » lun. 13 févr. 2012, 09:03

Bah alors, comme ça on ne formate pas son titre correctement ? :D

benjarobin
Maître du Kyudo
Messages : 15565
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: mtrr error - Xorg et Intel

Message par benjarobin » lun. 13 févr. 2012, 09:12

Avoir ceci comme paramètres: vga=795 nomodeset => Pas de possibilité d'utiliser les drivers intel car les drivers ont besoin de KMS. Cela fait presque 1 an que c'est le cas... Depuis combien de temps tu n'avais pas mis à jour
De plus ne pas utiliser des UUID pour le chargeur comme pour fstab est "dangereux"
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 09:25

Je mets à jour régulièrement (une fois par jour en gros). Pour le fstab ... bof les UUID, ça marche parfaitement comme ça y'a un seul disque ... c'est pas une partition qui va faire sauter X.
Faut virer le paramêtre vga=795 dans grub? Je viens de faire ça ... et au reboot ... xdm démarre puis je mets mon login, mot de passe ... [Enter] ... et hop on revient sur xdm \o/
Aucune trace d'erreur dans aucun log ...

Si je fais un startx en init3 :

Code : Tout sélectionner

$ startx


X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.2-1-ARCH i686 
Current Operating System: Linux BaZ00k4 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:46:10 UTC 2012 i686
Kernel command line: root=/dev/sda1 ro
Build Date: 29 January 2012  03:41:53PM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 09:24:48 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
FATAL: Module fbcon not found.
(EE) synaptics: Mouse0: Synaptics driver unable to detect protocol
(EE) PreInit returned 11 for "Mouse0"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost

waiting for X server to shut down Server terminated successfully (0). Closing log file.
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

benjarobin
Maître du Kyudo
Messages : 15565
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Intel] Xorg - mtrr error

Message par benjarobin » lun. 13 févr. 2012, 09:31

Peux tu donner le log de Xorg complet ?
Et la sortie de cette commande :

Code : Tout sélectionner

grep -ERv "^#|^$" /etc/modprobe* /etc/mkini* /etc/rc.conf /etc/X11/xorg*
Tu peux aussi essayé avec un nouvel utilisateur de test
Dernière modification par benjarobin le lun. 13 févr. 2012, 09:33, modifié 1 fois.
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)

Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10542
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [Intel] Xorg - mtrr error

Message par FoolEcho » lun. 13 févr. 2012, 09:32

Aussi, le xorg.conf est déprécié (si tu as des trucs personnalisés, il vaut mieux les placer dans /etc/X11/xorg.conf.d/ pour laisser faire la détection par X le plus possible). :)
«The following statement is not true. The previous statement is true.» :nage:

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 09:52

Alors:

Code : Tout sélectionner

$ grep -ERv "^#|^$" /etc/modprobe* /etc/mkini* /etc/rc.conf /etc/X11/xorg*
/etc/modprobe.d/pcspkr:blacklist pcspkr
/etc/modprobe.d/pcspkr:install pcspkr /bin/false
/etc/mkinitcpio.conf:MODULES=""
/etc/mkinitcpio.conf:BINARIES=""
/etc/mkinitcpio.conf:FILES=""
/etc/mkinitcpio.conf:HOOKS="base udev autodetect pata scsi sata filesystems usbinput"
/etc/mkinitcpio.d/example.preset:PRESETS=('default' 'fallback')
/etc/mkinitcpio.d/example.preset:ALL_kver='/boot/vmlinuz-linux'
/etc/mkinitcpio.d/example.preset:ALL_config='/etc/mkinitcpio.conf'
/etc/mkinitcpio.d/example.preset:default_image="/tmp/initramfs-linux.img"
/etc/mkinitcpio.d/example.preset:default_options=""
/etc/mkinitcpio.d/example.preset:fallback_image="/tmp/initramfs-linux-fallback.img"
/etc/mkinitcpio.d/example.preset:fallback_options="-S autodetect"
/etc/mkinitcpio.d/linux.preset:ALL_config="/etc/mkinitcpio.conf"
/etc/mkinitcpio.d/linux.preset:ALL_kver="/boot/vmlinuz-linux"
/etc/mkinitcpio.d/linux.preset:PRESETS=('default' 'fallback')
/etc/mkinitcpio.d/linux.preset:default_image="/boot/initramfs-linux.img"
/etc/mkinitcpio.d/linux.preset:fallback_image="/boot/initramfs-linux-fallback.img"
/etc/mkinitcpio.d/linux.preset:fallback_options="-S autodetect"
/etc/rc.conf:LOCALE="en_US.UTF-8"
/etc/rc.conf:DAEMON_LOCALE="no"
/etc/rc.conf:HARDWARECLOCK="localtime"
/etc/rc.conf:TIMEZONE="Europe/Paris"
/etc/rc.conf:KEYMAP="us"
/etc/rc.conf:CONSOLEFONT=
/etc/rc.conf:CONSOLEMAP=
/etc/rc.conf:USECOLOR="yes"
/etc/rc.conf:MODULES=(vboxdrv)
/etc/rc.conf:UDEV_TIMEOUT=30
/etc/rc.conf:USEDMRAID="no"
/etc/rc.conf:USEBTRFS="no"
/etc/rc.conf:USELVM="no"
/etc/rc.conf:HOSTNAME="BaZ00k4"
/etc/rc.conf:interface=eth0
/etc/rc.conf:address=10.0.16.244
/etc/rc.conf:netmask=255.255.240.0
/etc/rc.conf:broadcast=10.0.16.255
/etc/rc.conf:gateway=10.0.16.1
/etc/rc.conf:NETWORK_PERSIST="no"
/etc/rc.conf:DAEMONS=(syslog-ng @network @netfs @sshd @crond @hal @ntpdate)
/etc/X11/xorg.conf.d/10-quirks.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-quirks.conf:        Identifier "ThinkPad HDAPS accelerometer blacklist"
/etc/X11/xorg.conf.d/10-quirks.conf:        MatchProduct "ThinkPad HDAPS accelerometer data"
/etc/X11/xorg.conf.d/10-quirks.conf:        Option "Ignore" "on"
/etc/X11/xorg.conf.d/10-quirks.conf:EndSection
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:Section "InputClass"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:        Identifier "touchpad catchall"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:        Driver "synaptics"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:        MatchIsTouchpad "on"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:        MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:             Option "VertEdgeScroll" "on"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:             Option "VertTwoFingerScroll" "on"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:             Option "HorizEdgeScroll" "on"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:             Option "HorizTwoFingerScroll" "on"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:             Option "CircularScrolling" "on"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:             Option "CircScrollTrigger" "2"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:             Option "EmulateTwoFingerMinZ" "0"
/etc/X11/xorg.conf.d/10-synaptics.conf.pacsave:EndSection
/etc/X11/xorg.conf.d/10-synaptics.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-synaptics.conf:        Identifier "touchpad catchall"
/etc/X11/xorg.conf.d/10-synaptics.conf:        Driver "synaptics"
/etc/X11/xorg.conf.d/10-synaptics.conf:        MatchIsTouchpad "on"
/etc/X11/xorg.conf.d/10-synaptics.conf:        MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-synaptics.conf:        Option "TapButton1" "1"
/etc/X11/xorg.conf.d/10-synaptics.conf:        Option "TapButton2" "2"
/etc/X11/xorg.conf.d/10-synaptics.conf:        Option "TapButton3" "3"
/etc/X11/xorg.conf.d/10-synaptics.conf:EndSection
/etc/X11/xorg.conf.d/50-joystick.conf:Section "InputClass"
/etc/X11/xorg.conf.d/50-joystick.conf:	Identifier "joystick catchall"
/etc/X11/xorg.conf.d/50-joystick.conf:	MatchIsJoystick "on"
/etc/X11/xorg.conf.d/50-joystick.conf:	MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/50-joystick.conf:	Driver "joystick"
/etc/X11/xorg.conf.d/50-joystick.conf:EndSection
/etc/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev pointer catchall"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchIsPointer "on"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/etc/X11/xorg.conf.d/10-evdev.conf:EndSection
/etc/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev keyboard catchall"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchIsKeyboard "on"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/etc/X11/xorg.conf.d/10-evdev.conf:    	Option         "XkbLayout"  "us"
/etc/X11/xorg.conf.d/10-evdev.conf:    	Option         "XkbVariant" "intl"
/etc/X11/xorg.conf.d/10-evdev.conf:    	Option         "XkbOptions" "terminate:ctrl_alt_bksp" 
/etc/X11/xorg.conf.d/10-evdev.conf:EndSection
/etc/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev touchpad catchall"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchIsTouchpad "on"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/etc/X11/xorg.conf.d/10-evdev.conf:EndSection
/etc/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev tablet catchall"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchIsTablet "on"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/etc/X11/xorg.conf.d/10-evdev.conf:EndSection
/etc/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev touchscreen catchall"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchIsTouchscreen "on"
/etc/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/etc/X11/xorg.conf.d/10-evdev.conf:EndSection
/etc/X11/xorg.conf.d/50-vmmouse.conf:Section "InputClass"
/etc/X11/xorg.conf.d/50-vmmouse.conf:	Identifier	"vmmouse"
/etc/X11/xorg.conf.d/50-vmmouse.conf:	MatchIsPointer	"on"
/etc/X11/xorg.conf.d/50-vmmouse.conf:	MatchTag	"vmmouse"
/etc/X11/xorg.conf.d/50-vmmouse.conf:	Driver		"vmmouse"
/etc/X11/xorg.conf.d/50-vmmouse.conf:EndSection
J'en ai profité aussi pour réinstalelr tout xorg et xorg-drivers ... reboot ... pareil.

Anecdote: en tant que root ça fonctionne -> startx lance twm sans soucis ...

Avec un super user "test":

Code : Tout sélectionner

$ id test
uid=1002(test) gid=1002(test) groups=1002(test),10(wheel),91(video),92(audio),93(optical),94(floppy),95(storage),100(users)
Nouvelle erreur avec fbcon :@

Code : Tout sélectionner

$ startx


X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.2-1-ARCH i686 
Current Operating System: Linux BaZ00k4 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:46:10 UTC 2012 i686
Kernel command line: root=/dev/sda1 ro
Build Date: 29 January 2012  03:41:53PM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 09:51:08 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
FATAL: Module fbcon not found.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost

waiting for X server to shut down Server terminated successfully (0). Closing log file.
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10542
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [Intel] Xorg - mtrr error

Message par FoolEcho » lun. 13 févr. 2012, 10:08

:? Je ne vois pas trace d'un quelconque module de ce nom ni dans le noyau, ni dans X... C'est un noyau personnalisé ?
warnaud a écrit :Anecdote: en tant que root ça fonctionne -> startx lance twm sans soucis ...
Tu peux montrer la trace du log ?
... et si tu lances twm par ton utilisateur (je suppose que tu lances autre chose par défaut) ?
«The following statement is not true. The previous statement is true.» :nage:

benjarobin
Maître du Kyudo
Messages : 15565
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Intel] Xorg - mtrr error

Message par benjarobin » lun. 13 févr. 2012, 10:10

Cela ne va pas te résoudre ton problème, mais désinstalle hal qui ne devrait plus être utilisé !
Puis remplace ta ligne de DAEMONSpar

Code : Tout sélectionner

DAEMONS=(syslog-ng dbus @network @sshd @crond @ntpdate)
Sinon j'ai vu un problème similaire (en root cela fonctionnait)

Peux tu donner le log de Xorg complet ? Merci => /var/log/Xorg.0.log

Peux tu donner la sortie de

Code : Tout sélectionner

pacman -Qs xorg
pacman -Qs xf86-video
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 10:19

J'ai viré hal/hal-info changé le rc.conf , reboot ... pareil :cnulca:
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 10:24

FoolEcho a écrit ::? Je ne vois pas trace d'un quelconque module de ce nom ni dans le noyau, ni dans X... C'est un noyau personnalisé ?
warnaud a écrit :Anecdote: en tant que root ça fonctionne -> startx lance twm sans soucis ...
Tu peux montrer la trace du log ?
... et si tu lances twm par ton utilisateur (je suppose que tu lances autre chose par défaut) ?
C'est le noyau par défaut aucune personnalisation :(
Non en utilisateur (le mien ou test, pas moyen de lancer X) ça fonctionne qu'en root ...

Le Xorg.0.log

Code : Tout sélectionner

[     8.731] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[     8.731] X Protocol Version 11, Revision 0
[     8.731] Build Operating System: Linux 3.2.2-1-ARCH i686 
[     8.731] Current Operating System: Linux BaZ00k4 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:46:10 UTC 2012 i686
[     8.731] Kernel command line: root=/dev/sda1 ro
[     8.731] Build Date: 29 January 2012  03:41:53PM
[     8.731]  
[     8.731] Current version of pixman: 0.24.4
[     8.731] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     8.731] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.731] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 09:24:37 2012
[     8.762] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     8.789] (==) No Layout section.  Using the first Screen section.
[     8.789] (==) No screen section available. Using defaults.
[     8.789] (**) |-->Screen "Default Screen Section" (0)
[     8.789] (**) |   |-->Monitor "<default monitor>"
[     8.801] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     8.801] (==) Automatically adding devices
[     8.801] (==) Automatically enabling devices
[     8.832] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     8.832] 	Entry deleted from font path.
[     8.852] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[     8.852] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.852] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.853] (II) Loader magic: 0x8228580
[     8.853] (II) Module ABI versions:
[     8.853] 	X.Org ANSI C Emulation: 0.4
[     8.853] 	X.Org Video Driver: 11.0
[     8.853] 	X.Org XInput driver : 13.0
[     8.853] 	X.Org Server Extension : 6.0
[     8.854] (--) PCI:*(0:0:2:0) 8086:2772:103c:3011 rev 2, Mem @ 0xe0400000/524288, 0xd0000000/268435456, 0xe0480000/262144, I/O @ 0x000010c0/8
[     8.854] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     8.854] (II) LoadModule: "extmod"
[     8.913] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[     8.920] (II) Module extmod: vendor="X.Org Foundation"
[     8.920] 	compiled for 1.11.4, module version = 1.0.0
[     8.920] 	Module class: X.Org Server Extension
[     8.920] 	ABI class: X.Org Server Extension, version 6.0
[     8.920] (II) Loading extension MIT-SCREEN-SAVER
[     8.920] (II) Loading extension XFree86-VidModeExtension
[     8.920] (II) Loading extension XFree86-DGA
[     8.920] (II) Loading extension DPMS
[     8.920] (II) Loading extension XVideo
[     8.920] (II) Loading extension XVideo-MotionCompensation
[     8.920] (II) Loading extension X-Resource
[     8.920] (II) LoadModule: "dbe"
[     8.920] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[     8.929] (II) Module dbe: vendor="X.Org Foundation"
[     8.929] 	compiled for 1.11.4, module version = 1.0.0
[     8.929] 	Module class: X.Org Server Extension
[     8.929] 	ABI class: X.Org Server Extension, version 6.0
[     8.929] (II) Loading extension DOUBLE-BUFFER
[     8.929] (II) LoadModule: "glx"
[     8.929] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.946] (II) Module glx: vendor="X.Org Foundation"
[     8.946] 	compiled for 1.11.4, module version = 1.0.0
[     8.946] 	ABI class: X.Org Server Extension, version 6.0
[     8.946] (==) AIGLX enabled
[     8.946] (II) Loading extension GLX
[     8.946] (II) LoadModule: "record"
[     8.947] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[     8.947] (II) Module record: vendor="X.Org Foundation"
[     8.947] 	compiled for 1.11.4, module version = 1.13.0
[     8.947] 	Module class: X.Org Server Extension
[     8.947] 	ABI class: X.Org Server Extension, version 6.0
[     8.947] (II) Loading extension RECORD
[     8.947] (II) LoadModule: "dri"
[     8.948] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[     8.959] (II) Module dri: vendor="X.Org Foundation"
[     8.959] 	compiled for 1.11.4, module version = 1.0.0
[     8.959] 	ABI class: X.Org Server Extension, version 6.0
[     8.959] (II) Loading extension XFree86-DRI
[     8.959] (II) LoadModule: "dri2"
[     8.960] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     8.960] (II) Module dri2: vendor="X.Org Foundation"
[     8.960] 	compiled for 1.11.4, module version = 1.2.0
[     8.960] 	ABI class: X.Org Server Extension, version 6.0
[     8.960] (II) Loading extension DRI2
[     8.960] (==) Matched intel as autoconfigured driver 0
[     8.960] (==) Matched vesa as autoconfigured driver 1
[     8.960] (==) Matched fbdev as autoconfigured driver 2
[     8.960] (==) Assigned the driver to the xf86ConfigLayout
[     8.960] (II) LoadModule: "intel"
[     8.972] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.008] (II) Module intel: vendor="X.Org Foundation"
[     9.008] 	compiled for 1.11.2, module version = 2.17.0
[     9.008] 	Module class: X.Org Video Driver
[     9.008] 	ABI class: X.Org Video Driver, version 11.0
[     9.008] (II) LoadModule: "vesa"
[     9.009] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.012] (II) Module vesa: vendor="X.Org Foundation"
[     9.012] 	compiled for 1.11.1, module version = 2.3.0
[     9.012] 	Module class: X.Org Video Driver
[     9.012] 	ABI class: X.Org Video Driver, version 11.0
[     9.012] (II) LoadModule: "fbdev"
[     9.012] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     9.022] (II) Module fbdev: vendor="X.Org Foundation"
[     9.022] 	compiled for 1.10.99.902, module version = 0.4.2
[     9.022] 	ABI class: X.Org Video Driver, version 11.0
[     9.022] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[     9.023] (II) VESA: driver for VESA chipsets: vesa
[     9.023] (II) FBDEV: driver for framebuffer: fbdev
[     9.023] (--) using VT number 7

[     9.023] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[     9.023] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[     9.031] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.031] (WW) Falling back to old probe method for vesa
[     9.031] (WW) Falling back to old probe method for fbdev
[     9.037] (II) Loading sub module "fbdevhw"
[     9.037] (II) LoadModule: "fbdevhw"
[     9.038] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     9.043] (II) Module fbdevhw: vendor="X.Org Foundation"
[     9.043] 	compiled for 1.11.4, module version = 0.0.2
[     9.043] 	ABI class: X.Org Video Driver, version 11.0
[     9.044] drmOpenDevice: node name is /dev/dri/card0
[     9.044] drmOpenDevice: open result is 10, (OK)
[     9.044] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[     9.044] drmOpenDevice: node name is /dev/dri/card0
[     9.044] drmOpenDevice: open result is 10, (OK)
[     9.044] drmOpenByBusid: drmOpenMinor returns 10
[     9.044] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[     9.044] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     9.044] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     9.044] (==) intel(0): RGB weight 888
[     9.044] (==) intel(0): Default visual is TrueColor
[     9.044] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[     9.044] (--) intel(0): Chipset: "945G"
[     9.044] (**) intel(0): Relaxed fencing disabled
[     9.044] (**) intel(0): Wait on SwapBuffers? enabled
[     9.044] (**) intel(0): Triple buffering? enabled
[     9.044] (**) intel(0): Framebuffer tiled
[     9.044] (**) intel(0): Pixmaps tiled
[     9.044] (**) intel(0): 3D buffers tiled
[     9.044] (**) intel(0): SwapBuffers wait enabled
[     9.044] (==) intel(0): video overlay key set to 0x101fe
[     9.102] (II) intel(0): Output VGA1 has no monitor section
[     9.172] (II) intel(0): EDID for output VGA1
[     9.172] (II) intel(0): Manufacturer: HWP  Model: 259a  Serial#: 808536151
[     9.172] (II) intel(0): Year: 2003  Week: 43
[     9.172] (II) intel(0): EDID Version: 1.3
[     9.172] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[     9.172] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[     9.172] (II) intel(0): Max Image Size [cm]: horiz.: 37  vert.: 30
[     9.172] (II) intel(0): Gamma: 2.20
[     9.172] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     9.172] (II) intel(0): First detailed timing is preferred mode
[     9.172] (II) intel(0): redX: 0.633 redY: 0.340   greenX: 0.295 greenY: 0.591
[     9.172] (II) intel(0): blueX: 0.141 blueY: 0.096   whiteX: 0.312 whiteY: 0.328
[     9.172] (II) intel(0): Supported established timings:
[     9.172] (II) intel(0): 720x400@70Hz
[     9.172] (II) intel(0): 640x480@60Hz
[     9.172] (II) intel(0): 640x480@67Hz
[     9.172] (II) intel(0): 640x480@72Hz
[     9.172] (II) intel(0): 640x480@75Hz
[     9.172] (II) intel(0): 800x600@60Hz
[     9.172] (II) intel(0): 800x600@72Hz
[     9.172] (II) intel(0): 800x600@75Hz
[     9.172] (II) intel(0): 832x624@75Hz
[     9.172] (II) intel(0): 1024x768@60Hz
[     9.172] (II) intel(0): 1024x768@75Hz
[     9.172] (II) intel(0): 1280x1024@75Hz
[     9.172] (II) intel(0): 1152x864@75Hz
[     9.172] (II) intel(0): Manufacturer's mask: 0
[     9.172] (II) intel(0): Supported standard timings:
[     9.172] (II) intel(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     9.172] (II) intel(0): Supported detailed timing:
[     9.172] (II) intel(0): clock: 135.0 MHz   Image Size:  376 x 301 mm
[     9.172] (II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     9.172] (II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     9.172] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[     9.172] (II) intel(0): Monitor name: hp L1925
[     9.172] (II) intel(0): Serial No: CNB34301HW
[     9.172] (II) intel(0): EDID (in hex):
[     9.172] (II) intel(0): 	00ffffffffffff0022f09a2557483130
[     9.172] (II) intel(0): 	2b0d01036e251e78ea0920a2574b9724
[     9.172] (II) intel(0): 	185054bdeb8081800101010101010101
[     9.172] (II) intel(0): 	010101010101bc34009851002a401090
[     9.172] (II) intel(0): 	1300782d1100001e000000fd00384c1e
[     9.172] (II) intel(0): 	520e000a202020202020000000fc0068
[     9.172] (II) intel(0): 	70204c313932350a20202020000000ff
[     9.172] (II) intel(0): 	00434e42333433303148570a202000e7
[     9.172] (II) intel(0): EDID vendor "HWP", prod id 9626
[     9.172] (II) intel(0): Using EDID range info for horizontal sync
[     9.173] (II) intel(0): Using EDID range info for vertical refresh
[     9.173] (II) intel(0): Printing DDC gathered Modelines:
[     9.173] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[     9.173] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[     9.173] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[     9.173] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[     9.173] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[     9.173] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[     9.173] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[     9.173] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[     9.173] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[     9.173] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[     9.173] (II) intel(0): Printing probed modes for output VGA1
[     9.173] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[     9.173] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[     9.173] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[     9.173] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[     9.173] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[     9.173] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[     9.173] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[     9.173] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[     9.173] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[     9.173] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[     9.173] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[     9.173] (II) intel(0): Output VGA1 connected
[     9.173] (II) intel(0): Using exact sizes for initial modes
[     9.173] (II) intel(0): Output VGA1 using initial mode 1280x1024
[     9.173] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     9.173] (II) intel(0): Kernel page flipping support detected, enabling
[     9.173] (**) intel(0): Display dimensions: (370, 300) mm
[     9.173] (**) intel(0): DPI set to (87, 86)
[     9.173] (II) Loading sub module "fb"
[     9.173] (II) LoadModule: "fb"
[     9.174] (II) Loading /usr/lib/xorg/modules/libfb.so
[     9.184] (II) Module fb: vendor="X.Org Foundation"
[     9.184] 	compiled for 1.11.4, module version = 1.0.0
[     9.184] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     9.184] (II) Loading sub module "dri2"
[     9.184] (II) LoadModule: "dri2"
[     9.184] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     9.184] (II) Module dri2: vendor="X.Org Foundation"
[     9.184] 	compiled for 1.11.4, module version = 1.2.0
[     9.184] 	ABI class: X.Org Server Extension, version 6.0
[     9.185] (II) UnloadModule: "vesa"
[     9.185] (II) Unloading vesa
[     9.185] (II) UnloadModule: "fbdev"
[     9.185] (II) Unloading fbdev
[     9.185] (II) UnloadModule: "fbdevhw"
[     9.185] (II) Unloading fbdevhw
[     9.185] (==) Depth 24 pixmap format is 32 bpp
[     9.185] (II) intel(0): [DRI2] Setup complete
[     9.185] (II) intel(0): [DRI2]   DRI driver: i915
[     9.185] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled
[     9.204] (II) UXA(0): Driver registered support for the following operations:
[     9.204] (II)         solid
[     9.204] (II)         copy
[     9.204] (II)         composite (RENDER acceleration)
[     9.204] (II)         put_image
[     9.204] (II)         get_image
[     9.204] (==) intel(0): Backing store disabled
[     9.204] (==) intel(0): Silken mouse enabled
[     9.204] (II) intel(0): Initializing HW Cursor
[     9.223] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     9.223] (==) intel(0): DPMS enabled
[     9.223] (==) intel(0): Intel XvMC decoder disabled
[     9.223] (II) intel(0): Set up textured video
[     9.223] (II) intel(0): Set up overlay video
[     9.223] (II) intel(0): direct rendering: DRI2 Enabled
[     9.223] (==) intel(0): hotplug detection: "enabled"
[     9.223] (--) RandR disabled
[     9.223] (II) Initializing built-in extension Generic Event Extension
[     9.223] (II) Initializing built-in extension SHAPE
[     9.224] (II) Initializing built-in extension MIT-SHM
[     9.224] (II) Initializing built-in extension XInputExtension
[     9.224] (II) Initializing built-in extension XTEST
[     9.224] (II) Initializing built-in extension BIG-REQUESTS
[     9.224] (II) Initializing built-in extension SYNC
[     9.224] (II) Initializing built-in extension XKEYBOARD
[     9.224] (II) Initializing built-in extension XC-MISC
[     9.224] (II) Initializing built-in extension SECURITY
[     9.224] (II) Initializing built-in extension XINERAMA
[     9.224] (II) Initializing built-in extension XFIXES
[     9.224] (II) Initializing built-in extension RENDER
[     9.224] (II) Initializing built-in extension RANDR
[     9.224] (II) Initializing built-in extension COMPOSITE
[     9.224] (II) Initializing built-in extension DAMAGE
[     9.402] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     9.402] (II) AIGLX: enabled GLX_INTEL_swap_event
[     9.402] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     9.402] (II) AIGLX: enabled GLX_SGI_make_current_read
[     9.402] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     9.402] (II) AIGLX: Loaded and initialized i915
[     9.402] (II) GLX: Initialized DRI2 GL provider for screen 0
[     9.403] (II) intel(0): Setting screen physical size to 338 x 270
[     9.879] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     9.879] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.879] (II) LoadModule: "evdev"
[     9.879] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.892] (II) Module evdev: vendor="X.Org Foundation"
[     9.892] 	compiled for 1.10.99.902, module version = 2.6.0
[     9.892] 	Module class: X.Org XInput Driver
[     9.892] 	ABI class: X.Org XInput driver, version 13.0
[     9.892] (II) Using input driver 'evdev' for 'Power Button'
[     9.892] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.892] (**) Power Button: always reports core events
[     9.892] (**) Power Button: Device: "/dev/input/event4"
[     9.892] (--) Power Button: Found keys
[     9.892] (II) Power Button: Configuring as keyboard
[     9.892] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[     9.892] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.892] (**) Option "xkb_rules" "evdev"
[     9.892] (**) Option "xkb_model" "evdev"
[     9.892] (**) Option "xkb_layout" "us"
[     9.892] (**) Option "xkb_variant" "intl"
[     9.892] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.922] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     9.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.922] (II) Using input driver 'evdev' for 'Power Button'
[     9.922] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.922] (**) Power Button: always reports core events
[     9.922] (**) Power Button: Device: "/dev/input/event3"
[     9.922] (--) Power Button: Found keys
[     9.922] (II) Power Button: Configuring as keyboard
[     9.922] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[     9.922] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     9.922] (**) Option "xkb_rules" "evdev"
[     9.922] (**) Option "xkb_model" "evdev"
[     9.922] (**) Option "xkb_layout" "us"
[     9.922] (**) Option "xkb_variant" "intl"
[     9.922] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.923] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[     9.923] (II) No input driver specified, ignoring this device.
[     9.923] (II) This device may have been added with another device file.
[     9.923] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event1)
[     9.923] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[     9.923] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[     9.923] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.924] (**) Logitech Optical USB Mouse: always reports core events
[     9.924] (**) Logitech Optical USB Mouse: Device: "/dev/input/event1"
[     9.924] (--) Logitech Optical USB Mouse: Found 3 mouse buttons
[     9.924] (--) Logitech Optical USB Mouse: Found scroll wheel(s)
[     9.924] (--) Logitech Optical USB Mouse: Found relative axes
[     9.924] (--) Logitech Optical USB Mouse: Found x and y relative axes
[     9.924] (II) Logitech Optical USB Mouse: Configuring as mouse
[     9.924] (II) Logitech Optical USB Mouse: Adding scrollwheel support
[     9.924] (**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[     9.924] (**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     9.924] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/event1"
[     9.924] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 8)
[     9.924] (II) Logitech Optical USB Mouse: initialized for relative axes.
[     9.924] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[     9.924] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[     9.924] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[     9.924] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[     9.924] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[     9.924] (II) No input driver specified, ignoring this device.
[     9.924] (II) This device may have been added with another device file.
[     9.925] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     9.925] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.925] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     9.925] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.925] (**) AT Translated Set 2 keyboard: always reports core events
[     9.925] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     9.925] (--) AT Translated Set 2 keyboard: Found keys
[     9.925] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[     9.925] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     9.925] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[     9.925] (**) Option "xkb_rules" "evdev"
[     9.925] (**) Option "xkb_model" "evdev"
[     9.925] (**) Option "xkb_layout" "us"
[     9.925] (**) Option "xkb_variant" "intl"
[     9.925] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.926] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[     9.926] (II) No input driver specified, ignoring this device.
[     9.926] (II) This device may have been added with another device file.
[     9.927] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[     9.927] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     9.927] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[     9.927] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.927] (**) HP WMI hotkeys: always reports core events
[     9.927] (**) HP WMI hotkeys: Device: "/dev/input/event5"
[     9.927] (--) HP WMI hotkeys: Found keys
[     9.927] (II) HP WMI hotkeys: Configuring as keyboard
[     9.927] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[     9.927] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
[     9.927] (**) Option "xkb_rules" "evdev"
[     9.927] (**) Option "xkb_model" "evdev"
[     9.927] (**) Option "xkb_layout" "us"
[     9.927] (**) Option "xkb_variant" "intl"
[     9.927] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   244.193] (II) Power Button: Close
[   244.193] (II) UnloadModule: "evdev"
[   244.193] (II) Unloading evdev
[   244.280] (II) Power Button: Close
[   244.280] (II) UnloadModule: "evdev"
[   244.280] (II) Unloading evdev
[   244.376] (II) Logitech Optical USB Mouse: Close
[   244.376] (II) UnloadModule: "evdev"
[   244.376] (II) Unloading evdev
[   244.483] (II) AT Translated Set 2 keyboard: Close
[   244.483] (II) UnloadModule: "evdev"
[   244.483] (II) Unloading evdev
[   244.590] (II) HP WMI hotkeys: Close
[   244.590] (II) UnloadModule: "evdev"
[   244.590] (II) Unloading evdev
[   244.594] (II) intel(0): [DRI2] Setup complete
[   244.594] (II) intel(0): [DRI2]   DRI driver: i915
[   244.594] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled
[   244.594] (II) UXA(0): Driver registered support for the following operations:
[   244.594] (II)         solid
[   244.594] (II)         copy
[   244.594] (II)         composite (RENDER acceleration)
[   244.594] (II)         put_image
[   244.594] (II)         get_image
[   244.594] (II) intel(0): Initializing HW Cursor
[   244.606] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   244.606] (==) intel(0): DPMS enabled
[   244.606] (==) intel(0): Intel XvMC decoder disabled
[   244.606] (II) intel(0): Set up textured video
[   244.606] (II) intel(0): Set up overlay video
[   244.606] (II) intel(0): direct rendering: DRI2 Enabled
[   244.606] (==) intel(0): hotplug detection: "enabled"
[   244.607] (--) RandR disabled
[   244.620] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   244.621] (II) AIGLX: enabled GLX_INTEL_swap_event
[   244.621] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   244.621] (II) AIGLX: enabled GLX_SGI_make_current_read
[   244.621] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   244.621] (II) AIGLX: Loaded and initialized i915
[   244.621] (II) GLX: Initialized DRI2 GL provider for screen 0
[   244.621] (II) intel(0): Setting screen physical size to 338 x 270
[   244.740] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   244.740] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   244.740] (II) Using input driver 'evdev' for 'Power Button'
[   244.740] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   244.740] (**) Power Button: always reports core events
[   244.740] (**) Power Button: Device: "/dev/input/event4"
[   244.740] (--) Power Button: Found keys
[   244.740] (II) Power Button: Configuring as keyboard
[   244.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   244.740] (**) Option "xkb_rules" "evdev"
[   244.741] (**) Option "xkb_model" "evdev"
[   244.741] (**) Option "xkb_layout" "us"
[   244.741] (**) Option "xkb_variant" "intl"
[   244.741] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   244.770] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   244.770] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   244.770] (II) Using input driver 'evdev' for 'Power Button'
[   244.770] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   244.770] (**) Power Button: always reports core events
[   244.770] (**) Power Button: Device: "/dev/input/event3"
[   244.770] (--) Power Button: Found keys
[   244.770] (II) Power Button: Configuring as keyboard
[   244.770] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[   244.770] (**) Option "xkb_rules" "evdev"
[   244.770] (**) Option "xkb_model" "evdev"
[   244.770] (**) Option "xkb_layout" "us"
[   244.770] (**) Option "xkb_variant" "intl"
[   244.770] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   244.771] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[   244.771] (II) No input driver specified, ignoring this device.
[   244.771] (II) This device may have been added with another device file.
[   244.771] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event1)
[   244.771] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[   244.771] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[   244.771] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   244.772] (**) Logitech Optical USB Mouse: always reports core events
[   244.772] (**) Logitech Optical USB Mouse: Device: "/dev/input/event1"
[   244.772] (--) Logitech Optical USB Mouse: Found 3 mouse buttons
[   244.772] (--) Logitech Optical USB Mouse: Found scroll wheel(s)
[   244.772] (--) Logitech Optical USB Mouse: Found relative axes
[   244.772] (--) Logitech Optical USB Mouse: Found x and y relative axes
[   244.772] (II) Logitech Optical USB Mouse: Configuring as mouse
[   244.772] (II) Logitech Optical USB Mouse: Adding scrollwheel support
[   244.772] (**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[   244.772] (**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   244.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/event1"
[   244.772] (II) Logitech Optical USB Mouse: initialized for relative axes.
[   244.772] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[   244.772] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[   244.772] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[   244.772] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[   244.772] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[   244.772] (II) No input driver specified, ignoring this device.
[   244.772] (II) This device may have been added with another device file.
[   244.773] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   244.773] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   244.773] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   244.773] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   244.773] (**) AT Translated Set 2 keyboard: always reports core events
[   244.773] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   244.773] (--) AT Translated Set 2 keyboard: Found keys
[   244.773] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   244.773] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   244.773] (**) Option "xkb_rules" "evdev"
[   244.773] (**) Option "xkb_model" "evdev"
[   244.773] (**) Option "xkb_layout" "us"
[   244.773] (**) Option "xkb_variant" "intl"
[   244.773] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   244.774] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[   244.774] (II) No input driver specified, ignoring this device.
[   244.774] (II) This device may have been added with another device file.
[   244.775] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[   244.775] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   244.775] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[   244.775] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   244.775] (**) HP WMI hotkeys: always reports core events
[   244.775] (**) HP WMI hotkeys: Device: "/dev/input/event5"
[   244.775] (--) HP WMI hotkeys: Found keys
[   244.775] (II) HP WMI hotkeys: Configuring as keyboard
[   244.775] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[   244.775] (**) Option "xkb_rules" "evdev"
[   244.775] (**) Option "xkb_model" "evdev"
[   244.775] (**) Option "xkb_layout" "us"
[   244.775] (**) Option "xkb_variant" "intl"
[   244.775] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
Merci
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 10:26

benjarobin a écrit : Peux tu donner la sortie de

Code : Tout sélectionner

pacman -Qs xorg
pacman -Qs xf86-video
Voici:

Code : Tout sélectionner

$ pacman -Qs xorg
local/xf86-input-acecad 1.5.0-2 (xorg-drivers xorg)
    X.Org acecad tablet input driver
local/xf86-input-aiptek 1.4.1-2 (xorg-drivers xorg)
    X.Org Aiptek USB Digital Tablet input driver
local/xf86-input-evdev 2.6.0-4 (xorg-drivers xorg)
    X.org evdev input driver
local/xf86-input-joystick 1.6.0-3 (xorg-drivers xorg)
    X.Org Joystick input driver
local/xf86-input-keyboard 1.6.1-1 (xorg-drivers xorg)
    X.Org keyboard input driver
local/xf86-input-mouse 1.7.1-2 (xorg-drivers xorg)
    X.org mouse input driver
local/xf86-input-mutouch 1.2.1-5 (xorg-input-drivers)
    X.org mutouch input driver
local/xf86-input-synaptics 1.5.0-1 (xorg-drivers xorg)
    Synaptics driver for notebook touchpads
local/xf86-input-vmmouse 12.7.0-3 (xorg-drivers xorg)
    X.org VMWare Mouse input driver
local/xf86-input-void 1.4.0-2 (xorg-drivers xorg)
    X.org void input driver
local/xf86-video-apm 1.2.3-4 (xorg-drivers xorg)
    X.org Alliance ProMotion video driver
local/xf86-video-ark 0.7.3-4 (xorg-drivers xorg)
    X.org ark video driver
local/xf86-video-ast 0.93.9-1 (xorg-drivers xorg)
    X.org ASPEED AST Graphics video driver
local/xf86-video-ati 6.14.3-1 (xorg-drivers xorg)
    X.org ati video driver
local/xf86-video-chips 1.2.4-3 (xorg-drivers xorg)
    X.org Chips and Technologies video driver
local/xf86-video-cirrus 1.3.2-7 (xorg-drivers xorg)
    X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.4-5 (xorg-drivers xorg)
    X.org dummy video driver
local/xf86-video-fbdev 0.4.2-5 (xorg-drivers xorg)
    X.org framebuffer video driver
local/xf86-video-geode 2.11.12-3 (xorg-drivers xorg)
    X.org AMD/Geode LX & NX video driver
local/xf86-video-glint 1.2.6-1 (xorg-drivers xorg)
    X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.4-4 (xorg-drivers xorg)
    X.org Number 9 I128 video driver
local/xf86-video-i740 1.3.2-7 (xorg-drivers xorg)
    X.org Intel i740 video driver
local/xf86-video-intel 2.17.0-2 (xorg-drivers xorg)
    X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.9.0-2 (xorg-drivers xorg)
    X.org mach64 video driver
local/xf86-video-mga 1.4.13-4 (xorg-drivers xorg)
    X.org mga video driver
local/xf86-video-neomagic 1.2.5-5 (xorg-drivers xorg)
    X.org neomagic video driver
local/xf86-video-nv 2.1.18-4 (xorg-drivers xorg)
    X.org nv video driver
local/xf86-video-r128 6.8.1-7 (xorg-drivers xorg)
    X.org ati Rage128 video driver
local/xf86-video-rendition 4.2.4-5 (xorg-drivers xorg)
    X.org Rendition video driver
local/xf86-video-s3 0.6.3-6 (xorg-drivers xorg)
    X.org S3 video driver
local/xf86-video-s3virge 1.10.4-6 (xorg-drivers xorg)
    X.org S3 Virge video driver
local/xf86-video-savage 2.3.3-1 (xorg-drivers xorg)
    X.org savage video driver
local/xf86-video-siliconmotion 1.7.5-3 (xorg-drivers xorg)
    X.org siliconmotion video driver
local/xf86-video-sis 0.10.3-5 (xorg-drivers xorg)
    X.org SiS video driver
local/xf86-video-sisusb 0.9.4-5 (xorg-drivers xorg)
    X.org SiS USB video driver
local/xf86-video-tdfx 1.4.3-7 (xorg-drivers xorg)
    X.org tdfx video driver
local/xf86-video-trident 1.3.4-5 (xorg-drivers xorg)
    X.org Trident video driver
local/xf86-video-tseng 1.2.4-5 (xorg-drivers xorg)
    X.org tseng video driver
local/xf86-video-v4l 0.2.0-9 (xorg-drivers xorg)
    X.org v4l video driver
local/xf86-video-vesa 2.3.0-7 (xorg-drivers xorg)
    X.org vesa video driver
local/xf86-video-vmware 11.1.0-1 (xorg-drivers xorg)
    X.org vmware video driver
local/xf86-video-voodoo 1.2.4-5 (xorg-drivers xorg)
    X.org 3dfx Voodoo1/Voodoo2 2D video driver
local/xf86-video-xgi 1.6.0-4 (xorg-drivers xorg)
    X.org XGI video driver
local/xf86-video-xgixp 1.8.0-4 (xorg-drivers xorg)
    X.org XGIXP video driver
local/xorg-appres 1.0.3-2
    List X application resource database
local/xorg-apps 7.6-1
    Transition package depending on various X.Org applications
local/xorg-bdftopcf 1.0.3-1 (xorg xorg-apps)
    Convert X font from Bitmap Distribution Format to Portable Compiled Format
local/xorg-docs 1.6-1 (xorg)
    X.org documentations
local/xorg-font-util 1.2.0-2 (xorg-fonts xorg)
    X.Org font utilities
local/xorg-font-utils 7.6-2
    Transitional package depending on xorg font utilities
local/xorg-fonts-100dpi 1.0.1-3 (xorg)
    X.org 100dpi fonts
local/xorg-fonts-75dpi 1.0.1-3 (xorg)
    X.org 75dpi fonts
local/xorg-fonts-alias 1.0.2-2
    X.org font alias files
local/xorg-fonts-encodings 1.0.4-1 (xorg-fonts xorg)
    X.org font encoding files
local/xorg-fonts-misc 1.0.1-1
    X.org misc fonts
local/xorg-fonts-type1 7.4-1
    X.org Type1 fonts
local/xorg-iceauth 1.0.5-1 (xorg-apps xorg)
    ICE authority file utility
local/xorg-luit 1.1.0-3 (xorg xorg-apps)
    Filter that can be run between an arbitrary application and a UTF-8 terminal emulator
local/xorg-mkfontdir 1.0.7-1 (xorg xorg-apps)
    Create an index of X font files in a directory
local/xorg-mkfontscale 1.1.0-1 (xorg-apps xorg)
    Create an index of scalable font files for X
local/xorg-server 1.11.4-1 (xorg)
    Xorg X server
local/xorg-server-common 1.11.4-1
    Xorg server common files
local/xorg-server-utils 7.6-2
    Transition package depending on xorg server utilities
local/xorg-sessreg 1.0.7-1 (xorg-apps xorg)
    Register X sessions in system utmp/utmpx databases
local/xorg-setxkbmap 1.2.0-3 (xorg-apps xorg)
    Set the keyboard using the X Keyboard Extension
local/xorg-smproxy 1.0.5-1 (xorg-apps xorg)
    Allows X applications that do not support X11R6 session management to participate in an X11R6 session
local/xorg-twm 1.0.7-1
    Tab Window Manager for the X Window System
local/xorg-utils 7.6-7
    Transition package depending on xorg utils
local/xorg-x11perf 1.5.4-1 (xorg-apps xorg)
    Simple X server performance benchmarker
local/xorg-xauth 1.0.6-1 (xorg-apps xorg)
    X.Org authorization settings program
local/xorg-xbacklight 1.1.2-2 (xorg-apps xorg)
    RandR-based backlight control application
local/xorg-xcalc 1.0.4.1-1
    Scientific calculator for X
local/xorg-xclock 1.0.6-1
    X clock
local/xorg-xcmsdb 1.0.3-2 (xorg-apps xorg)
    Device Color Characterization utility for X Color Management System
local/xorg-xcursorgen 1.0.4-3 (xorg-apps xorg)
    Create an X cursor file from PNG images
local/xorg-xdm 1.1.11-1
    X Display Manager
local/xorg-xdpyinfo 1.3.0-1 (xorg-apps xorg)
    Display information utility for X
local/xorg-xdriinfo 1.0.4-2 (xorg-apps xorg)
    Query configuration information of DRI drivers
local/xorg-xev 1.1.0-3 (xorg-apps xorg)
    Print contents of X events
local/xorg-xfd 1.1.0-1
    Displays all the characters in a font using either the X11 core protocol or libXft2
local/xorg-xfontsel 1.0.3-2
    Point and click selection of X11 font names
local/xorg-xgamma 1.0.4-2 (xorg-apps xorg)
    Alter a monitor's gamma correction
local/xorg-xhost 1.0.4-2 (xorg-apps xorg)
    Server access control program for X
local/xorg-xinit 1.3.2-1
    X.Org initialisation program
local/xorg-xinput 1.5.3-2 (xorg-apps xorg)
    Small commandline tool to configure devices
local/xorg-xkb-utils 7.6-1
    Transition package depending on various X keyboard utilities
local/xorg-xkbcomp 1.2.3-1 (xorg-apps xorg)
    X Keyboard description compiler
local/xorg-xkbevd 1.1.2-2 (xorg-apps xorg)
    XKB event daemon
local/xorg-xkbutils 1.0.3-2 (xorg-apps xorg)
    XKB utility demos
local/xorg-xkill 1.0.3-2 (xorg-apps xorg)
    Kill a client by its X resource
local/xorg-xlsatoms 1.1.0-2 (xorg-apps xorg)
    List interned atoms defined on server
local/xorg-xlsclients 1.1.2-1 (xorg-apps xorg)
    List client applications running on a display
local/xorg-xmessage 1.0.3-1
    Display a message or query in a window
local/xorg-xmodmap 1.0.5-2 (xorg-apps xorg)
    Utility for modifying keymaps and button mappings
local/xorg-xpr 1.0.3-2 (xorg-apps xorg)
    Print an X window dump from xwd
local/xorg-xprop 1.2.1-1 (xorg-apps xorg)
    Property displayer for X
local/xorg-xrandr 1.3.5-1 (xorg-apps xorg)
    Primitive command line interface to RandR extension
local/xorg-xrdb 1.0.9-1 (xorg-apps xorg)
    X server resource database utility
local/xorg-xrefresh 1.0.4-2 (xorg-apps xorg)
    Refresh all or part of an X screen
local/xorg-xset 1.2.2-1 (xorg-apps xorg)
    User preference utility for X
local/xorg-xsetroot 1.1.0-2 (xorg-apps xorg)
    Classic X utility to set your root window background to a given pattern or color
local/xorg-xvinfo 1.1.1-2 (xorg-apps xorg)
    Prints out the capabilities of any video adaptors associated with the display that are accessible through the X-Video extension
local/xorg-xwd 1.0.4-2 (xorg-apps xorg)
    X Window System image dumping utility
local/xorg-xwininfo 1.1.2-1 (xorg-apps xorg)
    Command-line utility to print information about windows on an X server
local/xorg-xwud 1.0.3-2 (xorg-apps xorg)
    X Window System image undumping utility
Et

Code : Tout sélectionner

$ pacman -Qs xf86-video
local/xf86-video-apm 1.2.3-4 (xorg-drivers xorg)
    X.org Alliance ProMotion video driver
local/xf86-video-ark 0.7.3-4 (xorg-drivers xorg)
    X.org ark video driver
local/xf86-video-ast 0.93.9-1 (xorg-drivers xorg)
    X.org ASPEED AST Graphics video driver
local/xf86-video-ati 6.14.3-1 (xorg-drivers xorg)
    X.org ati video driver
local/xf86-video-chips 1.2.4-3 (xorg-drivers xorg)
    X.org Chips and Technologies video driver
local/xf86-video-cirrus 1.3.2-7 (xorg-drivers xorg)
    X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.4-5 (xorg-drivers xorg)
    X.org dummy video driver
local/xf86-video-fbdev 0.4.2-5 (xorg-drivers xorg)
    X.org framebuffer video driver
local/xf86-video-geode 2.11.12-3 (xorg-drivers xorg)
    X.org AMD/Geode LX & NX video driver
local/xf86-video-glint 1.2.6-1 (xorg-drivers xorg)
    X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.4-4 (xorg-drivers xorg)
    X.org Number 9 I128 video driver
local/xf86-video-i740 1.3.2-7 (xorg-drivers xorg)
    X.org Intel i740 video driver
local/xf86-video-intel 2.17.0-2 (xorg-drivers xorg)
    X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.9.0-2 (xorg-drivers xorg)
    X.org mach64 video driver
local/xf86-video-mga 1.4.13-4 (xorg-drivers xorg)
    X.org mga video driver
local/xf86-video-neomagic 1.2.5-5 (xorg-drivers xorg)
    X.org neomagic video driver
local/xf86-video-nv 2.1.18-4 (xorg-drivers xorg)
    X.org nv video driver
local/xf86-video-r128 6.8.1-7 (xorg-drivers xorg)
    X.org ati Rage128 video driver
local/xf86-video-rendition 4.2.4-5 (xorg-drivers xorg)
    X.org Rendition video driver
local/xf86-video-s3 0.6.3-6 (xorg-drivers xorg)
    X.org S3 video driver
local/xf86-video-s3virge 1.10.4-6 (xorg-drivers xorg)
    X.org S3 Virge video driver
local/xf86-video-savage 2.3.3-1 (xorg-drivers xorg)
    X.org savage video driver
local/xf86-video-siliconmotion 1.7.5-3 (xorg-drivers xorg)
    X.org siliconmotion video driver
local/xf86-video-sis 0.10.3-5 (xorg-drivers xorg)
    X.org SiS video driver
local/xf86-video-sisusb 0.9.4-5 (xorg-drivers xorg)
    X.org SiS USB video driver
local/xf86-video-tdfx 1.4.3-7 (xorg-drivers xorg)
    X.org tdfx video driver
local/xf86-video-trident 1.3.4-5 (xorg-drivers xorg)
    X.org Trident video driver
local/xf86-video-tseng 1.2.4-5 (xorg-drivers xorg)
    X.org tseng video driver
local/xf86-video-v4l 0.2.0-9 (xorg-drivers xorg)
    X.org v4l video driver
local/xf86-video-vesa 2.3.0-7 (xorg-drivers xorg)
    X.org vesa video driver
local/xf86-video-vmware 11.1.0-1 (xorg-drivers xorg)
    X.org vmware video driver
local/xf86-video-voodoo 1.2.4-5 (xorg-drivers xorg)
    X.org 3dfx Voodoo1/Voodoo2 2D video driver
local/xf86-video-xgi 1.6.0-4 (xorg-drivers xorg)
    X.org XGI video driver
local/xf86-video-xgixp 1.8.0-4 (xorg-drivers xorg)
    X.org XGIXP video driver
Merci
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

benjarobin
Maître du Kyudo
Messages : 15565
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Intel] Xorg - mtrr error

Message par benjarobin » lun. 13 févr. 2012, 10:48

De plus as tu vraiment besoin de tous ces drivers ?

Code : Tout sélectionner

pacman -R xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-fbdev xf86-video-geode xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nv xf86-video-r128 xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86-video-xgixp
Edit: Désolé rien dit, ton système est à jour
Dernière modification par benjarobin le lun. 13 févr. 2012, 10:52, modifié 2 fois.
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 10:51

Code : Tout sélectionner

$ uname -a
Linux BaZ00k4 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:46:10 UTC 2012 i686 Intel(R) Pentium(R) 4 CPU 3.20GHz GenuineIntel GNU/Linux
J'ai le bon. Je suis pas en testing non plus.

Sinon non j'ai pas besoin de tout ça, j'ai juste tout réinstaller xorg / les drivers au cas où ... surtout que xorg (auto-config magic) il pleure si j'ai pas synaptics par exemple ...
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

benjarobin
Maître du Kyudo
Messages : 15565
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Intel] Xorg - mtrr error

Message par benjarobin » lun. 13 févr. 2012, 10:58

Que contient le dossier de ton utilisateur de test : ls -a /home/test
KMS est bien fonctionnel ? Tu as bien un changement de résolution au milieu du boot ?
Je te conseil la lecture de https://wiki.archlinux.org/index.php/Intel_Graphics suit la section KMS et force son activation
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 11:07

Code : Tout sélectionner

$ ls -a
.  ..  .bash_history  .bash_logout  .bash_profile  .bashrc  .screenrc  .viminfo  .xinitrc  .xsession  .xsession-errors
Tous dans leur version d'origine ( /etc/skel )

KMS semble fonctionnel, il y a bien un changement de résolution pendant le boot (changement qui permet à l'affichage d'être décallé de façon à ne presque plus voir l'état de lancement des services ... [DO ... )

J'ai rajouté i915 dans les modules de mkinitcpio.conf et lancé un mkinitcpio -p linux et j'ai rajouté i915.modeset=1 sur ma ligne de grub

Résultat: pareil depuis xdm / pareil en init 3 avec startx j'ai l'erreur fbcon :@ je vais m'acheter une carte avec un vrai chipset graphique genre une nvidia ? :D
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

benjarobin
Maître du Kyudo
Messages : 15565
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Intel] Xorg - mtrr error

Message par benjarobin » lun. 13 févr. 2012, 11:22

Je ne pense pas que l'erreur fbcon soit la cause du problème :-)
Si en root cela fonctionne c'est que l'on a du oublier quelque chose...
Avec l'utilisateur de test essaye

Code : Tout sélectionner

rm .bash_history  .bash_logout  .bash_profile  .bashrc  .screenrc  .viminfo  .xinitrc  .xsession  .xsession-errors
echo '#!/bin/bash' > .xinitrc
echo 'xterm' >> .xinitrc
startx
Zsh | KDE | PC fixe : core i7, carte nvidia | Portable : Asus ul80vt
Titre d'un sujet : [Thème] Sujet (état)

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 13:46

:shock: Alors ben ça lance twm avec xterm comme on voudrais.... par contre si je mets dans ~/.xinitrc , exec fluxbox ou exec fvwm ça explose direct le startx :|
pareil si je mets exec ck-launch-session fvwm ...
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10542
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [Intel] Xorg - mtrr error

Message par FoolEcho » lun. 13 févr. 2012, 15:21

À cause du changement de bibliothèque libpng/libtiff, peut-être (je ne suis pas convaincu) ? Tu as essayé de recompiler fvwm ? :|
«The following statement is not true. The previous statement is true.» :nage:

Avatar de l’utilisateur
warnaud
Maître du Kyudo
Messages : 1640
Inscription : ven. 11 août 2006, 17:05
Localisation : Collonges (01) France
Contact :

Re: [Intel] Xorg - mtrr error

Message par warnaud » lun. 13 févr. 2012, 15:23

ben yes je viens de le recompiler, même blague, et ça fait ça aussi avec fluxbox ...
Je sens que je vais réinstaller ça ira plus vite :D
Plus ça rate, plus ça a de chance de réussir. En somme, un succès n'est qu'une erreur qui a finit par réussir (même par erreur). Ne déséspérez donc pas et perseverez. Utilisez La Rache™
Patientia quod lard quod barrus planto diligo ut licentia
—¤÷(`[¤*Powered By *¤]´)÷¤—
Archlinux ~ Fvwm ~ Irssi ~ URxvt

Répondre