[radeon] Affichage trop grand pour mon écran (résolu)

Xorg, Compiz, KDE / Gnome / Xfce / Fluxbox / e17 / fvwm ... GDM/KDM/XDM...
Répondre
berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

[radeon] Affichage trop grand pour mon écran (résolu)

Message par berurier13 » mar. 04 déc. 2007, 22:03

Bonjour,

voici mon problème : depuis la dernière mise à jour de xorg, l'affichage déborde de l'écran de manière significative dès kdm. Sous kde, le menu en bas n'est pas du tout affiché.

De plus, je souhaite obtenir un affichage en 1280x1024 à 85Hz, mais mon écran me dit qu'il fonctionne à 60Hz (ce qui certain car je vois un léger scintillement caractéristique).

Pourtant : la commande xrandr croit que je fonctionne en 1280x1024 à 85Hz :

Code : Tout sélectionner

$ xrandr -q

Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1920 x 1200
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1280x1024_85.00   85.0*+
   1920x1200      85.0     75.0     72.8     70.0     60.0     60.0
   1920x1080      84.9     74.9     69.9     60.0     59.9
   1600x1200      85.0     75.0     70.0     65.0     60.0
   1680x1050      84.9     74.9     69.9     60.0     59.9
   1600x1024      60.2
   1400x1050      85.3     85.0     74.8     70.0     70.0     60.0
   1280x1024      85.0     75.0     60.0
   1280x1024_75.00   75.0
   1440x900       59.9
   1280x960       85.0     60.0
   1360x768       59.8     60.0
   1280x800       85.0     75.0     70.0     60.0
   1152x864      100.0     85.1     85.0     75.0     75.0     70.0     60.0
   1280x768       85.0     75.0     70.0     60.0
   1280x720       85.0     75.0     70.0     60.0
   1152x768       54.8
   1024x768       85.0     75.0     70.1     60.0
   832x624        74.6
   800x600        85.1     72.2     75.0     60.3     56.2
   640x480        85.0     72.8     75.0     59.9
   720x400        85.0
   640x400        85.1
   640x350        85.1
DVI-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1360x768       59.8     60.0
   1280x800       60.0
   1152x864       60.0*
   1280x768       60.0
   1280x720       60.0
   1024x768       60.0
   800x600        60.3
   640x480        59.9
S-video disconnected (normal left inverted right x axis y axis)
J'ai essayé un paquet de configuration différente de xorg.conf, mais toujours le même résultat.

Enfin, dans kde, si je demande à travers l'interface graphique à changer de fréquence (75Hz), l'affichage redevient normal (1280x1024 à 75Hz), et si je demande de revenir dans le configuration précédente, j'obtiens l'affichage désirée (1280x1024 à 85Hz).
Si je paramètre la résolution et la fréquence en ligne de commande via xrandr, tout rentre dans l'ordre. Il n'y a que l'affichage par défaut qui ne me convient pas.

J'avais trouvé un problème similaire sur www.archlinux.org, mais la solution ne marche pas chez moi.
http://bbs.archlinux.org/viewtopic.php?id=40506

Un peu d'aide ne serait pas de refus.

A plus

Béru

Caractéristiques :
Ma carte est une ati radeon 7500.
Mon moniteur est un Mitsubishi diamond pro 920.

Les versions de mes programmes sont les suivantes :
extra/xorg-server 1.4-6 [installed]
extra/xf86-video-ati 6.7.195-3 [installed]

Ci-joint mon fichier xorg.conf :

Code : Tout sélectionner

# X Server Configuration file generated by kX Generator 0.3.7
# (c) 2006 Tomasz Salacinski

  Section "ServerLayout"
      Identifier     "Xorg Configured"
      Screen         "Screen0"
      InputDevice    "platinum" "CoreKeyboard"
      InputDevice    "PS/2 Mouse" "CorePointer"
  EndSection

  Section "ServerFlags"
      Option         "AllowMouseOpenFail" "true"
      Option         "DefaultServerLayout" "Xorg Configured"
  EndSection

  Section "Files"
RgbPath "/usr/share/X11/rgb"
      FontPath       "/usr/share/fonts/misc:unscaled,/usr/share/fonts/misc,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/100dpi"
      FontPath       "/usr/share/fonts/100dpi"
      ModulePath     "/usr/lib/xorg/modules"
  EndSection

  Section "Module"
      Load           "i2c"
      Load           "ddc"
      Load           "dbe"
      Load           "dri"
      Load           "extmod"
      Load           "glx"
      Load           "bitmap" 
      Load           "type1"
      Load           "freetype"
      Load           "record"
      Load           "int10"
      Load           "vbe"
  EndSection

  Section "InputDevice"
      Identifier     "platinum"
      Driver         "kbd"
      Option         "AutoRepeat" "500 30"
      Option         "XkbRules" "xorg"
      Option         "XkbModel" "pc105"
      Option         "XkbLayout" "fr"
  EndSection

  Section "InputDevice"
      Identifier     "Serial Mouse"
      Driver         "mouse"
      Option         "Protocol" "Microsoft"
      Option         "Device" "/dev/ttyS0"
      Option         "Emulate3Buttons" "true"
      Option         "Emulate3Timeout" "70"
      Option         "SendCoreEvents" "true"
  EndSection

  Section "InputDevice"
      Identifier     "PS/2 Mouse"
      Driver         "mouse"
      Option         "Protocol" "auto"
      Option         "ZAxisMapping" "4 5"
      Option         "Device" "/dev/psaux"
      Option         "Emulate3Buttons" "true"
      Option         "Emulate3Timeout" "70"
      Option         "SendCoreEvents" "true"
  EndSection

  Section "InputDevice"
      Identifier     "USB Mouse"
      Driver         "mouse"
      Option         "Device" "/dev/input/mice"
      Option         "SendCoreEvents" "true"
      Option         "Protocol" "IMPS/2"
      Option         "ZAxisMapping" "4 5"
      Option         "Buttons" "5"
  EndSection

  Section "Device"
      Identifier     "atiradeon7500"
      Driver         "radeon"
      VendorName     "All"
      BoardName      "All"
      Option "XAANoOffscreenPixmaps" "true"
      Option "DDC"	"false"
 EndSection

  Section "Monitor"
      Identifier     "MitsubishiDP920"
      Option         "DPMS" "true"
      HorizSync      30.0 - 108.0
      VertRefresh    50.0 - 140.0

gamma 1.0
      VendorName     "Mitsubishi"
      ModeLine       "1280x1024_85.00" 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -HSync +Vsync
      ModeLine       "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync
      Option "PreferredMode" "1280x1024_85.00"
  EndSection

  Section "Screen"
      Identifier     "Screen0"
      Device         "atiradeon7500"
      Monitor        "MitsubishiDP920"
DefaultColorDepth 24

         SubSection "Display"
            Depth           24
            Modes           "1280x1024_85.00"
         EndSubSection
  EndSection
et le fichier /var/log/Xorg.0.log

Code : Tout sélectionner


X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.23-ARCH i686 
Current Operating System: Linux goldwing 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 29 November 2007  04:31:54PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  4 21:37:46 2007
(==) Using config file: "/etc/X11/xorg.conf"
(**) Option "defaultserverlayout" "Xorg Configured"
(**) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "MitsubishiDP920"
(**) |   |-->Device "atiradeon7500"
(**) |-->Input Device "platinum"
(**) |-->Input Device "PS/2 Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 10ec,8139 card a0a0,0027 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1814,0301 card 1737,0055 rev 00 class 02,80,00 hdr 00
(II) PCI: 00:11:0: chip 1106,3147 card 1106,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1462,4720 rev 40 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5157 card 1002,0f2a rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[1] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[B]
	[2] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[3] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xcfc00000 - 0xdfcfffff (0x10100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon RV200 QW [Radeon 7500] rev 0, Mem @ 0xd0000000/27, 0xdfef0000/16, I/O @ 0xc800/8, BIOS @ 0xdfec0000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xdfff0000 - 0xdfff7fff (0x8000) MX[B]
	[1] -1	0	0xdfffff00 - 0xdfffffff (0x100) MX[B]
	[2] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[3] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[4] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[5] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[6] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[7] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[8] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[9] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[10] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[11] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xdfff0000 - 0xdfff7fff (0x8000) MX[B]
	[1] -1	0	0xdfffff00 - 0xdfffffff (0x100) MX[B]
	[2] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[3] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[4] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[5] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[6] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[7] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[8] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[9] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[10] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[11] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xdfff0000 - 0xdfff7fff (0x8000) MX[B]
	[5] -1	0	0xdfffff00 - 0xdfffffff (0x100) MX[B]
	[6] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[7] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[8] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[13] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[14] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[15] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[16] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 4.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 6.7.195
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) ATI: ATI driver wrapper (version 6.7.195) for chipsets: mach64, rage128, radeon
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon 7500 QW (AGP/PCI) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xdfff0000 - 0xdfff7fff (0x8000) MX[B]
	[5] -1	0	0xdfffff00 - 0xdfffffff (0x100) MX[B]
	[6] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[7] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[8] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[13] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[14] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[15] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[16] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xdfff0000 - 0xdfff7fff (0x8000) MX[B]
	[5] -1	0	0xdfffff00 - 0xdfffffff (0x100) MX[B]
	[6] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[7] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[8] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[11] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[12] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[16] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[17] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[18] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[19] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[20] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
	[21] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[22] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xdfef0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 7500 QW (AGP/PCI)" (ChipID = 0x5157)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0xdfec0000
(II) RADEON(0): AGP card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=65536K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=16600
(II) RADEON(0): Bios Connector table: 
(II) RADEON(0): Port0: DDCType-3, DACType-0, TMDSType-0, ConnectorType-2
(II) RADEON(0): Port1: DDCType-2, DACType-0, TMDSType-0, ConnectorType-3
(II) RADEON(0): Port5: DDCType-0, DACType-1, TMDSType-2, ConnectorType-6
(II) RADEON(0): Output VGA-0 using monitor section MitsubishiDP920
(**) RADEON(0): Option "PreferredMode" "1280x1024_85.00"
(II) RADEON(0): I2C bus "VGA_DDC" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI_DDC" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: PAL
(II) RADEON(0): TV standards supported by chip: NTSC PAL 
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- VGA_DDC
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- DVI-I
 DAC Type  -- Primary
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) RADEON(0): Port2:
 Monitor   -- AUTO
 Connector -- STV
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- None
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
finished output detect: 0
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024_85.00
(II) RADEON(0): Output DVI-0 using initial mode 1152x864
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(**) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B]
	[1] 0	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xdfff0000 - 0xdfff7fff (0x8000) MX[B]
	[7] -1	0	0xdfffff00 - 0xdfffffff (0x100) MX[B]
	[8] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[9] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[10] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[15] 0	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[19] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[20] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[21] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[22] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[23] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
	[24] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[25] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RADEON(0): Write-combining range (0xd0000000,0x4000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xd3ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1920,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1920,1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x11d0000
(II) RADEON(0): Will use depth buffer at offset 0x1a9a000
(II) RADEON(0): Will use 29184 kb for textures at offset 0x2364000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1106/0x3099; Card 0x1002/0x5157]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb3919000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb3918000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb3718000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb3238000
(II) RADEON(0): [drm] register handle = 0xdfef0000
(II) RADEON(0): [dri] Visual configs initialized
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xd3ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
init memmap
init common
init crtc2
init pll2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xd3ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc2
restore pll2
finished PLL2
restore dac
enable montype: 1
disable montype: 1
disable montype: 1
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 19
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xd3ffd000 is: 0xd3ffd000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xd3ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xe07fe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6986
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 270
(**) Option "CoreKeyboard"
(**) platinum: always reports core events
(**) Option "Protocol" "standard"
(**) platinum: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) platinum: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) platinum: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) platinum: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) platinum: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (platinum)
(II) XINPUT: Adding extended input device "platinum" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/Type1, removing from list!
enable montype: 1
enable montype: 1
enable montype: 1
enable montype: 1
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(**) RADEON(0): Option "ddc" "false"
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(**) RADEON(0): Option "ddc" "false"
Dernière modification par berurier13 le sam. 02 févr. 2008, 15:30, modifié 1 fois.

Avatar de l’utilisateur
marc[i1]
Maître du Kyudo
Messages : 1753
Inscription : ven. 27 oct. 2006, 10:48
Localisation : Nantes (44)
Contact :

Message par marc[i1] » mer. 05 déc. 2007, 13:13

Salut,

comme tu as Xorg 7.3, essaie de démarrer sans ton xorg.conf.

Code : Tout sélectionner

mv xorg.conf xorg.conf.poulpe
startx
Ne vous emmerdez plus, emmerdez les autres.

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » mer. 05 déc. 2007, 23:00

J'ai donc virer mon xorg.conf, puis rebooter : kdm démarre de la même manière que lorsque xorg.conf est là. Par contre impossible de se logguer.

Par contre, en faisant un init 3 sous root dans un terminal, puis startx avec mon user, xorg plante. Voici les messages d'erreur extraits de Xorg.0.log :

Code : Tout sélectionner

(EE) Unable to locate/open config file
...
(EE) Failed to load module "fbdev" (module does not exist, 0)
...
(EE) Failed to load module "vga" (module does not exist, 0)
...

FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

Avatar de l’utilisateur
marc[i1]
Maître du Kyudo
Messages : 1753
Inscription : ven. 27 oct. 2006, 10:48
Localisation : Nantes (44)
Contact :

Message par marc[i1] » mer. 05 déc. 2007, 23:27

Ton noyau, c'est celui de arch ou un compilé par tes soins ?

c'est bizarre comme affaire ! :/
Ne vous emmerdez plus, emmerdez les autres.

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » jeu. 06 déc. 2007, 19:07

Oui, j'ai le kernel par défaut :

core/kernel26 2.6.23.8-1 [installed]

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » jeu. 06 déc. 2007, 22:32

Au vue de mes message d'erreurs, j'ai déployé les paquets xf86-video-vga et xf86-video-fbdev.
J'ai lancé startx : nouveau message d'erreur, il me manque xterm. J'installe xterm at là ça démarre. Par contre, toujours le même problème, ça déborde de l'écran :(

Avatar de l’utilisateur
vincentxavier
Elfe
Messages : 778
Inscription : ven. 11 août 2006, 18:17
Localisation : Epinay sur Seine (93)
Contact :

Message par vincentxavier » jeu. 06 déc. 2007, 22:35

As tu essayé en mettant

Code : Tout sélectionner

Modes       "1200x800"
dans /etc/X11/xorg.conf ??
Warranty

THIS ADVICE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.

En clair, je ne pourrais être tenu responsable des dégats causés par l'utilisation de mes conseils

Image

Avatar de l’utilisateur
BadPotato
archer
Messages : 127
Inscription : dim. 26 août 2007, 19:57
Localisation : Canada - Québec

Message par BadPotato » jeu. 06 déc. 2007, 22:37

tu peux configurer "HorizSync" et "VertRefresh" dans la section "Monitor" de xorg.conf, en essayant avec quelques essais (au pire, si tu veux le chiffre exact, tu peux prendre un live-cd quelconque pour l'avoir.

un exemple:

Code : Tout sélectionner

Section "Monitor"
    Identifier  "monitor0"

    HorizSync   31.5, 35.15, 35.5
    VertRefresh 50-70

EndSection

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » dim. 09 déc. 2007, 19:03

vincentxavier> Je viens d'essayer de mettre simplement les lignes suivantes

Code : Tout sélectionner

SubSection "Display"
    Depth           24
    Modes           "1024x768"
EndSubSection
mais elles n'ont absolument aucun n'effet. On dirait que le serveur X n'en tient pas compte.

BadPotato> Les paramètres mentionnés dans mon fichier de conf sont ceux issus du manuel de mon moniteur. Le problème n'est pas de limiter la résolution du moniteur, mais plutôt de l'augmenter jusqu'à 85Hz. Jusqu'à la mise à jour, les paramètres marchaient bien.

Avatar de l’utilisateur
marc[i1]
Maître du Kyudo
Messages : 1753
Inscription : ven. 27 oct. 2006, 10:48
Localisation : Nantes (44)
Contact :

Message par marc[i1] » lun. 10 déc. 2007, 11:06

Tu n'aurais pas fait une copie de ton xorg.conf dans /root ?
Ne vous emmerdez plus, emmerdez les autres.

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » mar. 11 déc. 2007, 20:17

marc[i1]> Non, pas de copie de xorg.conf dans mon /root/.

J'ai essayé de supprimer les deux lignes modeline et preferredMode de mon fichier de conf, le serveur graphique démarre en 1360x768@60 (ça occupe les 2/3 de la largeur de l'écran).

Avatar de l’utilisateur
marc[i1]
Maître du Kyudo
Messages : 1753
Inscription : ven. 27 oct. 2006, 10:48
Localisation : Nantes (44)
Contact :

Message par marc[i1] » mar. 11 déc. 2007, 21:38

ça me laisse perplexe ton affaire ! à croire que les réglages sont dans un autre fichier que ton xorg.conf !

à part tenter de tracer le lancement de xorg, je vois pas de solution sur le moment :/
Ne vous emmerdez plus, emmerdez les autres.

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » mar. 29 janv. 2008, 20:01

Des petites nouvelles de mon problème qui n'est toujours pas réglé :?

J'ai trouvé une bonne doc pour la configuration de ma carte sur le site : http://wiki.debian.org/XStrikeForce/HowToRandR12

Mon nouveau fichier de configuration est beaucoup plus simple (voir ci dessous), mais il ne règle pas le problème.

Par contre, lorsque je lance la commande xrandr -q, j'obtiens :

Code : Tout sélectionner

Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 350mm x 262mm
   1600x1200      85.0     75.0     69.9
   1280x1024      84.8*    75.0
   1280x960       84.9
   1152x864       75.0     74.8
   1024x768       84.9     75.1     70.1     60.0
   832x624        74.6
   800x600        84.9     72.2     75.0     60.3     56.2
   640x480        84.6     75.0     72.8     66.7     60.0
   720x400        87.8     70.1
DVI-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1360x768       59.8     60.0
   1280x800       60.0
   1152x864       60.0*
   1280x768       60.0
   1280x720       60.0
   1024x768       60.0
   800x600        60.3
   640x480        59.9
S-video disconnected (normal left inverted right x axis y axis)
Or, je n'ai pas de port DVI sur ma carte :shock:
Lorsque j'essaye de déconnecter le port dans xorg.conf, le serveur X ne se lance plus, et mentionne qu'il n'y aucun screen valide.

Code : Tout sélectionner

  Section "Monitor"
      Identifier     "DVI-0"
      Option         "Ignore" "true"
  EndSection
Quelqu'un a une idée ??

Code : Tout sélectionner

  
  Section "ServerLayout"
      Identifier     "Xorg Configured"
      Screen         "Screen0"
      InputDevice    "platinum" "CoreKeyboard"
      InputDevice    "PS/2 Mouse" "CorePointer"
  EndSection

  Section "ServerFlags"
      Option         "AllowMouseOpenFail" "true"
  EndSection

  Section "Files"
RgbPath "/usr/share/X11/rgb"
      FontPath       "/usr/share/fonts/misc:unscaled,/usr/share/
fonts/misc,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/75dp
i,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/100dpi"
      FontPath       "/usr/share/fonts/100dpi"
      ModulePath     "/usr/lib/xorg/modules"
  EndSection

  Section "Module"
      Load           "i2c"
      Load           "ddc"
      Load           "dbe"
      Load           "dri"
      Load           "extmod"
      Load           "glx"
      Load           "bitmap"
      Load           "freetype"
      Load           "record"
      Load           "int10"
      Load           "vbe"
  EndSection

  Section "InputDevice"
      Identifier     "platinum"
      Driver         "kbd"
      Option         "AutoRepeat" "500 30"
      Option         "XkbRules" "xorg"
      Option         "XkbModel" "pc105"
      Option         "XkbLayout" "fr"
  EndSection

  Section "InputDevice"
      Identifier     "Serial Mouse"
      Driver         "mouse"
      Option         "Protocol" "Microsoft"
      Option         "Device" "/dev/ttyS0"
      Option         "Emulate3Buttons" "true"
      Option         "Emulate3Timeout" "70"
      Option         "SendCoreEvents" "true"
  EndSection

  Section "InputDevice"
      Identifier     "PS/2 Mouse"
      Driver         "mouse"
      Option         "Protocol" "auto"
      Option         "ZAxisMapping" "4 5"
      Option         "Device" "/dev/psaux"
      Option         "Emulate3Buttons" "true"
      Option         "Emulate3Timeout" "70"
      Option         "SendCoreEvents" "true"
  EndSection

  Section "InputDevice"
      Identifier     "USB Mouse"
      Driver         "mouse"
      Option         "Device" "/dev/input/mice"
      Option         "SendCoreEvents" "true"
      Option         "Protocol" "IMPS/2"
      Option         "ZAxisMapping" "4 5"
      Option         "Buttons" "5"
  EndSection

  Section "Monitor"
      Identifier     "MitsubishiDP920"
      Option         "DPMS" "true"
  EndSection

  Section "Device"
      Identifier     "atiradeon7500"
      Driver         "radeon"
      Option         "Monitor-VGA-0" "MitsubishiDP920"
 EndSection

  Section "Screen"
      Identifier     "Screen0"
      Device         "atiradeon7500"
      Monitor        "MitsubishiDP920"
DefaultColorDepth 24

         SubSection "Display"
            Depth           24
         EndSubSection
  EndSection

_alexmyself
Chu Ko Nu
Messages : 405
Inscription : lun. 18 sept. 2006, 16:21
Localisation : france, yvelines 78

Message par _alexmyself » mer. 30 janv. 2008, 03:27

moi je virerai toute la section module,
l'option monitor-vga-0 dans device,
defaultcolor... et la sub section dans screen,
et l'option dpms dans monitor

a partir de la, si besoin, tu pourra tester l'efficacité de chaque option, tu n'aura plus de parasites

rien a voir mais je virerai aussi les definitions des mouse serial et ps2, garder que l'usb et l'ajouter dans le server layout a la place de ps2

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » ven. 01 févr. 2008, 19:19

Ok, j'ai simplifié le fichier xorg.conf au minimum

Code : Tout sélectionner

 Section "ServerLayout"
      Identifier     "Xorg Configured"
      Screen         "Screen0"
      InputDevice    "platinum" "CoreKeyboard"
      InputDevice    "PS/2 Mouse" "CorePointer"
  EndSection

  Section "ServerFlags"
      Option         "AllowMouseOpenFail" "true"
  EndSection

 Section "InputDevice"
      Identifier     "platinum"
      Driver         "kbd"
      Option         "AutoRepeat" "500 30"
      Option         "XkbRules" "xorg"
      Option         "XkbModel" "pc105"
      Option         "XkbLayout" "fr"
  EndSection

 Section "InputDevice"
      Identifier     "PS/2 Mouse"
      Driver         "mouse"
      Option         "Protocol" "auto"
      Option         "ZAxisMapping" "4 5"
      Option         "Device" "/dev/psaux"
      Option         "Emulate3Buttons" "true"
      Option         "Emulate3Timeout" "70"
      Option         "SendCoreEvents" "true"
  EndSection

 Section "Monitor"
      Identifier     "VGA-0"
      Option "PreferredMode" "1280x1024"
      Option "Enable" "true"
  EndSection

  Section "Device"
      Identifier     "atiradeon7500"
      Driver         "radeon"
 EndSection

  Section "Screen"
      Identifier     "Screen0"
      Device         "atiradeon7500"
      Monitor        "VGA-0"
  EndSection

mais le problème persiste. J'ai fait des tests supplémentaires : au travers de la commande xrandr -q, je perçois trois sorties sur ma carte : VGA-0, SVIDEO et DVI-0. Or ma carte possède effectivement trois sorties, mais 1 VGA (avec le moniteur), 1 SVIDEO et une composite (prise TV). Pas de DVI. En regardant dans le manuel de la carte, il existe des variantes du modèle avec les ports VGA et DVI. (Modèle Powercolor avec Ati radeon 7500).

Au démarrage du serveur X, c'est la conf DVI qui pilote l'écran : je peux la commander au travers de la commande xrandr. Lorsque je change la résolution via KDE, c'est la conf VGA qui reprend la main, la modification de l'interface DVI-0 au travers xrandr n'ayant plus d'effet. Si je lance la commande xrand --output DVI-0 --auto, c'est la conf DVI qui reprend la main. Le problème de l'écran trop venant du fait de l'affichage d'un bureau 1280x1024 avec la conf DVI 1152x864 :

Code : Tout sélectionner

Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 350mm x 262mm
   1280x1024      84.8*+   75.0
   1600x1200      85.0     75.0     69.9
   1280x960       84.9
   1152x864       75.0     74.8
   1024x768       84.9     75.1     70.1     60.0
   832x624        74.6
   800x600        84.9     72.2     75.0     60.3     56.2
   640x480        84.6     75.0     72.8     66.7     60.0
   720x400        87.8     70.1
DVI-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1360x768       59.8     60.0
   1280x800       60.0
   1152x864       60.0*
   1280x768       60.0
   1280x720       60.0
   1024x768       60.0
   800x600        60.3
   640x480        59.9
S-video disconnected (normal left inverted right x axis y axis)
Est ce qu'il y a un bug du driver dans la détection des variantes de la carte ??

Cactus
Maître du Kyudo
Messages : 2073
Inscription : sam. 16 sept. 2006, 10:39
Localisation : 31 - Toulouse Nord

Message par Cactus » ven. 01 févr. 2008, 19:34

Au pire, tu forces la commande xrandr "kimarche" (c) dans le rc.local... :wink:

berurier13
Hankyu
Messages : 10
Inscription : mar. 04 déc. 2007, 21:34

Message par berurier13 » sam. 02 févr. 2008, 15:30

Problème contourné en ajoutant un mode pour DVI-0 dans le fichier xorg.conf. Voilà le fichier de conf final :

Code : Tout sélectionner

 Section "ServerLayout"
      Identifier     "Xorg Configured"
      Screen         "Screen0"
      InputDevice    "platinum" "CoreKeyboard"
      InputDevice    "PS/2 Mouse" "CorePointer"
  EndSection

  Section "ServerFlags"
      Option         "AllowMouseOpenFail" "true"
  EndSection

 Section "InputDevice"
      Identifier     "platinum"
      Driver         "kbd"
      Option         "AutoRepeat" "500 30"
      Option         "XkbRules" "xorg"
      Option         "XkbModel" "pc105"
      Option         "XkbLayout" "fr"
  EndSection

  Section "InputDevice"
      Identifier     "PS/2 Mouse"
      Driver         "mouse"
      Option         "Protocol" "auto"
      Option         "ZAxisMapping" "4 5"
      Option         "Device" "/dev/psaux"
      Option         "Emulate3Buttons" "true"
      Option         "Emulate3Timeout" "70"
      Option         "SendCoreEvents" "true"
  EndSection

  Section "Monitor"
      Identifier     "DVI-0"
     Modeline "1280x1024_84.80"  158.98  1280 1376 1512 1744  1024 1025 1028 1075  -HSync +Vsync
        Option "PreferredMode" "1280x1024_84.80"
  EndSection

  Section "Monitor"
      Identifier     "VGA-0"
      Option "PreferredMode" "1280x1024"
      Option "Enable" "true"
  EndSection

  Section "Device"
      Identifier     "atiradeon7500"
      Driver         "radeon"
 EndSection

  Section "Screen"
      Identifier     "Screen0"
      Device         "atiradeon7500"
      Monitor        "VGA-0"
  EndSection

Merci à tous pour votre aide.

Béru[/code]

Répondre