[xorg] pas d'accélération matérielle (résolu)
Publié : mar. 09 déc. 2014, 14:31
Bonjour,
J'ai installé une nouvelle config (CM + proc + ram) et y ai mis mon ancien disque dur systeme.
Depuis je n'arrive pas à activer l'accélération graphique.
J'utilise la carte graphique intégrée à la CM donc j'imagine au processeur.
Le proc est : Intel Core i5-4690 http://www.ldlc.com/fiche/PB00166696.html
La CM : ASUS H81I-PLUS http://www.ldlc.com/fiche/PB00152266.html
lspci | grep -i vga donne :
J'ai les drivers suivant : xf86-video-intel et xf86-video-vesa
Ayant installé le vesa car il m'était impossible d'ouvrir la session X.
D'ailleurs, j'ai été obligé d'activé le “early” KMS cf https://wiki.archlinux.fr/Intel pour pouvoir ouvrir une session X.
(mais peut être est ce la commande mkinitcpio -p linux qui m'a débloqué ?)
Maintenant j'arrive à ouvrir une session graphique mais l'accélération matérielle ne fonctionne pas.
(ni le son d'ailleurs)
Voici mon /var/log/Xorg.0.log
Merci beaucoup pour votre aide.
J'ai installé une nouvelle config (CM + proc + ram) et y ai mis mon ancien disque dur systeme.
Depuis je n'arrive pas à activer l'accélération graphique.
J'utilise la carte graphique intégrée à la CM donc j'imagine au processeur.
Le proc est : Intel Core i5-4690 http://www.ldlc.com/fiche/PB00166696.html
La CM : ASUS H81I-PLUS http://www.ldlc.com/fiche/PB00152266.html
lspci | grep -i vga donne :
Code : Tout sélectionner
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
Ayant installé le vesa car il m'était impossible d'ouvrir la session X.
D'ailleurs, j'ai été obligé d'activé le “early” KMS cf https://wiki.archlinux.fr/Intel pour pouvoir ouvrir une session X.
(mais peut être est ce la commande mkinitcpio -p linux qui m'a débloqué ?)
Maintenant j'arrive à ouvrir une session graphique mais l'accélération matérielle ne fonctionne pas.
(ni le son d'ailleurs)
Voici mon /var/log/Xorg.0.log
Code : Tout sélectionner
[ 6.505]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 6.505] X Protocol Version 11, Revision 0
[ 6.505] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 6.505] Current Operating System: Linux archerie 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 x86_64
[ 6.505] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=UUID=02f0418c-9db7-4611-b4e8-ccc6598e3bbb rw vga=0x031B initrd=../initramfs-linux.img
[ 6.505] Build Date: 10 November 2014 07:52:13PM
[ 6.505]
[ 6.505] Current version of pixman: 0.32.6
[ 6.505] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.505] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.505] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 9 12:12:11 2014
[ 6.506] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.506] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.506] (==) No Layout section. Using the first Screen section.
[ 6.506] (==) No screen section available. Using defaults.
[ 6.506] (**) |-->Screen "Default Screen Section" (0)
[ 6.506] (**) | |-->Monitor "<default monitor>"
[ 6.507] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6.507] (==) Automatically adding devices
[ 6.507] (==) Automatically enabling devices
[ 6.507] (==) Automatically adding GPU devices
[ 6.508] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.508] Entry deleted from font path.
[ 6.508] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.508] Entry deleted from font path.
[ 6.508] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.509] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.509] Entry deleted from font path.
[ 6.509] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.509] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.509] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.509] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.509] (II) Loader magic: 0x818d80
[ 6.509] (II) Module ABI versions:
[ 6.509] X.Org ANSI C Emulation: 0.4
[ 6.509] X.Org Video Driver: 18.0
[ 6.509] X.Org XInput driver : 21.0
[ 6.509] X.Org Server Extension : 8.0
[ 6.509] (EE) systemd-logind: failed to get session: PID 346 does not belong to any known session
[ 6.509] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.510] (--) PCI:*(0:0:2:0) 8086:0412:1043:8534 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 6.510] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.510] (II) LoadModule: "glx"
[ 6.510] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.604] (II) Module glx: vendor="NVIDIA Corporation"
[ 6.604] compiled for 4.0.2, module version = 1.0.0
[ 6.604] Module class: X.Org Server Extension
[ 6.604] (II) NVIDIA GLX Module 304.125 Mon Dec 1 20:22:48 PST 2014
[ 6.604] (==) Matched intel as autoconfigured driver 0
[ 6.604] (==) Matched intel as autoconfigured driver 1
[ 6.604] (==) Matched modesetting as autoconfigured driver 2
[ 6.604] (==) Matched fbdev as autoconfigured driver 3
[ 6.604] (==) Matched vesa as autoconfigured driver 4
[ 6.604] (==) Assigned the driver to the xf86ConfigLayout
[ 6.604] (II) LoadModule: "intel"
[ 6.604] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.610] (II) Module intel: vendor="X.Org Foundation"
[ 6.610] compiled for 1.16.1, module version = 2.99.916
[ 6.610] Module class: X.Org Video Driver
[ 6.610] ABI class: X.Org Video Driver, version 18.0
[ 6.610] (II) LoadModule: "modesetting"
[ 6.611] (WW) Warning, couldn't open module modesetting
[ 6.611] (II) UnloadModule: "modesetting"
[ 6.611] (II) Unloading modesetting
[ 6.611] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 6.611] (II) LoadModule: "fbdev"
[ 6.611] (WW) Warning, couldn't open module fbdev
[ 6.611] (II) UnloadModule: "fbdev"
[ 6.611] (II) Unloading fbdev
[ 6.611] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 6.611] (II) LoadModule: "vesa"
[ 6.611] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 6.612] (II) Module vesa: vendor="X.Org Foundation"
[ 6.612] compiled for 1.16.0, module version = 2.3.2
[ 6.612] Module class: X.Org Video Driver
[ 6.612] ABI class: X.Org Video Driver, version 18.0
[ 6.612] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 6.612] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 6.612] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 6.612] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 6.612] (II) VESA: driver for VESA chipsets: vesa
[ 6.612] (++) using VT number 7
[ 6.615] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 6.615] (WW) Falling back to old probe method for vesa
[ 6.615] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 6.615] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 6.615] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 6.615] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.615] (==) intel(0): RGB weight 888
[ 6.615] (==) intel(0): Default visual is TrueColor
[ 6.615] (II) intel(0): Output VGA1 has no monitor section
[ 6.615] (II) intel(0): Enabled output VGA1
[ 6.615] (II) intel(0): Output HDMI1 has no monitor section
[ 6.615] (II) intel(0): Enabled output HDMI1
[ 6.615] (II) intel(0): Output HDMI2 has no monitor section
[ 6.615] (II) intel(0): Enabled output HDMI2
[ 6.615] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 6.703] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 6.703] (II) intel(0): Enabled output VIRTUAL1
[ 6.703] (--) intel(0): Output HDMI1 using initial mode 1680x1050 on pipe 0
[ 6.703] (==) intel(0): TearFree disabled
[ 6.703] (==) intel(0): DPI set to (96, 96)
[ 6.703] (II) Loading sub module "dri2"
[ 6.703] (II) LoadModule: "dri2"
[ 6.703] (II) Module "dri2" already built-in
[ 6.703] (II) Loading sub module "present"
[ 6.703] (II) LoadModule: "present"
[ 6.703] (II) Module "present" already built-in
[ 6.703] (II) UnloadModule: "vesa"
[ 6.703] (II) Unloading vesa
[ 6.703] (==) Depth 24 pixmap format is 32 bpp
[ 6.703] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 6.703] (==) intel(0): Backing store enabled
[ 6.703] (==) intel(0): Silken mouse enabled
[ 6.703] (II) intel(0): HW Cursor enabled
[ 6.703] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.703] (==) intel(0): DPMS enabled
[ 6.703] (II) intel(0): [DRI2] Setup complete
[ 6.703] (II) intel(0): [DRI2] DRI driver: i965
[ 6.703] (II) intel(0): [DRI2] VDPAU driver: i965
[ 6.703] (II) intel(0): direct rendering: DRI2 enabled
[ 6.703] (II) intel(0): hardware support for Present enabled
[ 6.703] (==) intel(0): display hotplug detection enabled
[ 6.703] (--) RandR disabled
[ 6.707] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 6.708] (II) intel(0): switch to mode 1680x1050@59.9 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 6.733] (II) intel(0): Setting screen physical size to 444 x 277
[ 6.760] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6.760] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.760] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 6.760] (II) LoadModule: "evdev"
[ 6.760] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.761] (II) Module evdev: vendor="X.Org Foundation"
[ 6.761] compiled for 1.16.2, module version = 2.9.1
[ 6.761] Module class: X.Org XInput Driver
[ 6.761] ABI class: X.Org XInput driver, version 21.0
[ 6.761] (II) Using input driver 'evdev' for 'Power Button'
[ 6.761] (**) Power Button: always reports core events
[ 6.761] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 6.761] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.761] (--) evdev: Power Button: Found keys
[ 6.761] (II) evdev: Power Button: Configuring as keyboard
[ 6.761] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 6.761] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.761] (**) Option "xkb_rules" "evdev"
[ 6.761] (**) Option "xkb_model" "pc104"
[ 6.761] (**) Option "xkb_layout" "fr"
[ 6.761] (**) Option "xkb_variant" "latin9"
[ 6.774] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6.774] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.774] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 6.774] (II) Using input driver 'evdev' for 'Power Button'
[ 6.774] (**) Power Button: always reports core events
[ 6.774] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 6.774] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.774] (--) evdev: Power Button: Found keys
[ 6.774] (II) evdev: Power Button: Configuring as keyboard
[ 6.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 6.774] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.774] (**) Option "xkb_rules" "evdev"
[ 6.774] (**) Option "xkb_model" "pc104"
[ 6.774] (**) Option "xkb_layout" "fr"
[ 6.774] (**) Option "xkb_variant" "latin9"
[ 6.775] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event2)
[ 6.775] (II) No input driver specified, ignoring this device.
[ 6.775] (II) This device may have been added with another device file.
[ 6.775] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event10)
[ 6.775] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall"
[ 6.775] (**) HID 046a:0023: Applying InputClass "Keyboard Layout"
[ 6.775] (II) Using input driver 'evdev' for 'HID 046a:0023'
[ 6.775] (**) HID 046a:0023: always reports core events
[ 6.775] (**) evdev: HID 046a:0023: Device: "/dev/input/event10"
[ 6.775] (--) evdev: HID 046a:0023: Vendor 0x46a Product 0x23
[ 6.775] (--) evdev: HID 046a:0023: Found keys
[ 6.775] (II) evdev: HID 046a:0023: Configuring as keyboard
[ 6.775] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:046A:0023.0002/input/input14/event10"
[ 6.775] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 8)
[ 6.775] (**) Option "xkb_rules" "evdev"
[ 6.775] (**) Option "xkb_model" "pc104"
[ 6.775] (**) Option "xkb_layout" "fr"
[ 6.775] (**) Option "xkb_variant" "latin9"
[ 6.775] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event12)
[ 6.775] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall"
[ 6.775] (**) HID 046a:0023: Applying InputClass "Keyboard Layout"
[ 6.775] (II) Using input driver 'evdev' for 'HID 046a:0023'
[ 6.775] (**) HID 046a:0023: always reports core events
[ 6.775] (**) evdev: HID 046a:0023: Device: "/dev/input/event12"
[ 6.775] (--) evdev: HID 046a:0023: Vendor 0x46a Product 0x23
[ 6.775] (--) evdev: HID 046a:0023: Found 1 mouse buttons
[ 6.775] (--) evdev: HID 046a:0023: Found scroll wheel(s)
[ 6.775] (--) evdev: HID 046a:0023: Found relative axes
[ 6.775] (II) evdev: HID 046a:0023: Forcing relative x/y axes to exist.
[ 6.775] (--) evdev: HID 046a:0023: Found absolute axes
[ 6.775] (II) evdev: HID 046a:0023: Forcing absolute x/y axes to exist.
[ 6.775] (--) evdev: HID 046a:0023: Found keys
[ 6.775] (II) evdev: HID 046a:0023: Configuring as mouse
[ 6.775] (II) evdev: HID 046a:0023: Configuring as keyboard
[ 6.775] (II) evdev: HID 046a:0023: Adding scrollwheel support
[ 6.775] (**) evdev: HID 046a:0023: YAxisMapping: buttons 4 and 5
[ 6.775] (**) evdev: HID 046a:0023: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.775] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:046A:0023.0003/input/input16/event12"
[ 6.775] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 9)
[ 6.775] (**) Option "xkb_rules" "evdev"
[ 6.775] (**) Option "xkb_model" "pc104"
[ 6.775] (**) Option "xkb_layout" "fr"
[ 6.775] (**) Option "xkb_variant" "latin9"
[ 6.775] (II) evdev: HID 046a:0023: initialized for relative axes.
[ 6.775] (WW) evdev: HID 046a:0023: ignoring absolute axes.
[ 6.776] (**) HID 046a:0023: (accel) keeping acceleration scheme 1
[ 6.776] (**) HID 046a:0023: (accel) acceleration profile 0
[ 6.776] (**) HID 046a:0023: (accel) acceleration factor: 2.000
[ 6.776] (**) HID 046a:0023: (accel) acceleration threshold: 4
[ 6.776] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event11)
[ 6.776] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6.776] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 6.776] (**) Logitech USB Optical Mouse: always reports core events
[ 6.776] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event11"
[ 6.776] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 6.776] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 6.776] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 6.776] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 6.776] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 6.776] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 6.776] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 6.776] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 6.776] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C077.0001/input/input15/event11"
[ 6.776] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[ 6.776] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 6.776] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 6.776] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 6.776] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 6.776] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 6.776] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 6.776] (II) No input driver specified, ignoring this device.
[ 6.776] (II) This device may have been added with another device file.
[ 6.776] (II) config/udev: Adding input device UVC Camera (046d:0805) (/dev/input/event13)
[ 6.776] (**) UVC Camera (046d:0805): Applying InputClass "evdev keyboard catchall"
[ 6.776] (**) UVC Camera (046d:0805): Applying InputClass "Keyboard Layout"
[ 6.776] (II) Using input driver 'evdev' for 'UVC Camera (046d:0805)'
[ 6.776] (**) UVC Camera (046d:0805): always reports core events
[ 6.776] (**) evdev: UVC Camera (046d:0805): Device: "/dev/input/event13"
[ 6.776] (--) evdev: UVC Camera (046d:0805): Vendor 0x46d Product 0x805
[ 6.776] (--) evdev: UVC Camera (046d:0805): Found keys
[ 6.776] (II) evdev: UVC Camera (046d:0805): Configuring as keyboard
[ 6.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input17/event13"
[ 6.776] (II) XINPUT: Adding extended input device "UVC Camera (046d:0805)" (type: KEYBOARD, id 11)
[ 6.776] (**) Option "xkb_rules" "evdev"
[ 6.776] (**) Option "xkb_model" "pc104"
[ 6.776] (**) Option "xkb_layout" "fr"
[ 6.776] (**) Option "xkb_variant" "latin9"
[ 6.776] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 6.776] (II) No input driver specified, ignoring this device.
[ 6.776] (II) This device may have been added with another device file.
[ 6.777] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 6.777] (II) No input driver specified, ignoring this device.
[ 6.777] (II) This device may have been added with another device file.
[ 6.777] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[ 6.777] (II) No input driver specified, ignoring this device.
[ 6.777] (II) This device may have been added with another device file.
[ 6.777] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 6.777] (II) No input driver specified, ignoring this device.
[ 6.777] (II) This device may have been added with another device file.
[ 6.777] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[ 6.777] (II) No input driver specified, ignoring this device.
[ 6.777] (II) This device may have been added with another device file.
[ 6.777] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 6.777] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 6.777] (**) Eee PC WMI hotkeys: Applying InputClass "Keyboard Layout"
[ 6.777] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 6.777] (**) Eee PC WMI hotkeys: always reports core events
[ 6.777] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event4"
[ 6.777] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 6.777] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 6.777] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 6.777] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"
[ 6.777] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 6.777] (**) Option "xkb_rules" "evdev"
[ 6.777] (**) Option "xkb_model" "pc104"
[ 6.777] (**) Option "xkb_layout" "fr"
[ 6.777] (**) Option "xkb_variant" "latin9"
[ 6.777] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 6.777] (II) No input driver specified, ignoring this device.
[ 6.777] (II) This device may have been added with another device file.Merci beaucoup pour votre aide.
