[Xorg] Freez a répétition (résolu)

Xorg, Compiz, KDE / Gnome / Xfce / Fluxbox / e17 / fvwm ... GDM/KDM/XDM...
Répondre
Avatar de l’utilisateur
lesebas
Chu Ko Nu
Messages : 339
Inscription : ven. 01 févr. 2013, 19:16

[Xorg] Freez a répétition (résolu)

Message par lesebas »

Bonjour,

Depuis quelques temps j'ai des freez à répétition sur mon PC (hard reset seul solution, la souris bouge mais pas de boutons actifs ni de clavier). Au début j'ai cru que le problème venait de XFCE avec la passage à 4.12 et j'avais vidé le cache des sessions. Mais ça recommence, surtout lorsque 2 utilisateurs sont logués. Mais je ne trouve pas d'ou ça vient. Dans quel fichier de log je peux trouver des traces?
Dernière modification par lesebas le jeu. 01 oct. 2015, 19:28, modifié 1 fois.
Seb

Archlinux sur AMD64 (xfce / lightdm)
Avatar de l’utilisateur
Xorg
Maître du Kyudo
Messages : 1933
Inscription : dim. 22 janv. 2012, 19:25
Localisation : Entre le clavier et la chaise.

Re: [Xorg] Freez a repetition

Message par Xorg »

Salut,

Tu peux trouver les logs dans le répertoire ~/.local/share/xorg/.
Tu n'aurais pas effectué une mise à jour de noyau/pilotes aussi par hasard ?
Arch Linux x86_64 - Sway
AMD Ryzen 5 3600X - 32 Go de DDR4 - SSD NVMe 1 To + SSD SATA 250 Go - Sapphire NITRO+ Radeon RX 580
Image AUR___Image Wiki___Image GitHub
Avatar de l’utilisateur
lesebas
Chu Ko Nu
Messages : 339
Inscription : ven. 01 févr. 2013, 19:16

Re: [Xorg] Freez a repetition

Message par lesebas »

Voila ce que me donne journalctl :

Code : Tout sélectionner

-- Logs begin at mer. 2013-12-11 07:30:21 CET, end at mar. 2015-05-19 19:37:47 C
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch
lines 1-23...skipping...
-- Logs begin at mer. 2013-12-11 07:30:21 CET, end at mar. 2015-05-19 19:37:47 CEST. --
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x0180 data 0xbeef0301
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x0184 data 0xbeef0201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x0188 data 0xbeef0202
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x018c data 0xbeef0201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x0190 data 0x00000000
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x0194 data 0xbeef0201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x0198 data 0xbeef0201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x019c data 0xbeef0201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x01a0 data 0xbeef0202
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x01a4 data 0xbeef1e00
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x01a8 data 0xbeef0351
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x01ac data 0x00000000
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x01b0 data 0x00000000
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x01b4 data 0xbeef0201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 7 mthd 0x01b8 data 0xbeef0201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 2 mthd 0x0000 data 0xbeef3901
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 2 mthd 0x0180 data 0xbeef0301
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 3 mthd 0x0000 data 0xbeef6201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 3 mthd 0x0180 data 0xbeef0301
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 4 mthd 0x0000 data 0xbeef5201
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 4 mthd 0x0180 data 0xbeef0301
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 5 mthd 0x0000 data 0xbeef7701
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 5 mthd 0x0180 data 0xbeef0301
mai 19 19:03:29 Lupus kernel: nouveau E[   PFIFO][0000:04:00.0] CACHE_ERROR - ch 17 [chromium[1671]] subc 5 mthd 0x02fc data 0x00000001
mai 19 19:03:29 Lupus kernel: nouveau E[     PGR][0000:04:00.0]  (unknown bits 0x00000080) nsource: nstatus:
mai 19 19:03:29 Lupus kernel: nouveau E[     PGR][0000:04:00.0] ch 17 [0x0037a000 chromium[1671]] subc 7 class 0x4097 mthd 0x1d70 data 0x00000001
Seb

Archlinux sur AMD64 (xfce / lightdm)
Avatar de l’utilisateur
Xorg
Maître du Kyudo
Messages : 1933
Inscription : dim. 22 janv. 2012, 19:25
Localisation : Entre le clavier et la chaise.

Re: [Xorg] Freez a repetition

Message par Xorg »

Ceci n'est pas le log su serveur X. En principe, c'est le fichier ~/.local/share/xorg/Xorg.0.log qui est le log.

Mais bon, avec cet élément là, on peut déjà voir un beau bug avec le pilote libre. Et tu n'as pas non plus répondu à mes questions plus haut ; elles sont toujours d'actualité, si tu veux qu'on t'aide. :)
Arch Linux x86_64 - Sway
AMD Ryzen 5 3600X - 32 Go de DDR4 - SSD NVMe 1 To + SSD SATA 250 Go - Sapphire NITRO+ Radeon RX 580
Image AUR___Image Wiki___Image GitHub
Avatar de l’utilisateur
lesebas
Chu Ko Nu
Messages : 339
Inscription : ven. 01 févr. 2013, 19:16

Re: [Xorg] Freez a repetition

Message par lesebas »

Danx le log de X je n'ai pas trouvé grand chose... Par contre je suis passé à nouveau il y a environ 2 mois... je pense que ça fonctionnait mieux avec le pilote proprio... Je fais comment pour repasser à nvidia?

Xorg.0.log :

Code : Tout sélectionner

[     5.694] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[     5.694] X Protocol Version 11, Revision 0
[     5.694] Build Operating System: Linux 3.19.2-1-ARCH x86_64 
[     5.694] Current Operating System: Linux Lupus 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64
[     5.694] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=394aa8ac-15f0-4ad5-835f-1f72d2e8113d rw quiet
[     5.694] Build Date: 14 April 2015  10:34:18AM
[     5.694]  
[     5.694] Current version of pixman: 0.32.6
[     5.694] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.694] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.694] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 19 19:29:50 2015
[     5.700] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.700] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.717] (==) No Layout section.  Using the first Screen section.
[     5.717] (==) No screen section available. Using defaults.
[     5.717] (**) |-->Screen "Default Screen Section" (0)
[     5.717] (**) |   |-->Monitor "<default monitor>"
[     5.718] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.718] (==) Automatically adding devices
[     5.718] (==) Automatically enabling devices
[     5.718] (==) Automatically adding GPU devices
[     5.723] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[     5.723] 	Entry deleted from font path.
[     5.723] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[     5.727] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     5.727] 	Entry deleted from font path.
[     5.727] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     5.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     5.728] 	Entry deleted from font path.
[     5.728] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     5.728] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     5.728] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.728] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.730] (II) Loader magic: 0x815d80
[     5.730] (II) Module ABI versions:
[     5.730] 	X.Org ANSI C Emulation: 0.4
[     5.730] 	X.Org Video Driver: 19.0
[     5.730] 	X.Org XInput driver : 21.0
[     5.730] 	X.Org Server Extension : 9.0
[     5.732] (EE) systemd-logind: failed to get session: PID 377 does not belong to any known session
[     5.732] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.734] (--) PCI:*(0:4:0:0) 10de:0393:1043:8276 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, I/O @ 0x00007c00/128, BIOS @ 0x????????/131072
[     5.734] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.734] (II) LoadModule: "glx"
[     5.747] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.805] (II) Module glx: vendor="X.Org Foundation"
[     5.805] 	compiled for 1.17.1, module version = 1.0.0
[     5.805] 	ABI class: X.Org Server Extension, version 9.0
[     5.805] (==) AIGLX enabled
[     5.805] (==) Matched nouveau as autoconfigured driver 0
[     5.805] (==) Matched nv as autoconfigured driver 1
[     5.805] (==) Matched nouveau as autoconfigured driver 2
[     5.805] (==) Matched nv as autoconfigured driver 3
[     5.805] (==) Matched modesetting as autoconfigured driver 4
[     5.805] (==) Matched fbdev as autoconfigured driver 5
[     5.805] (==) Matched vesa as autoconfigured driver 6
[     5.805] (==) Assigned the driver to the xf86ConfigLayout
[     5.805] (II) LoadModule: "nouveau"
[     5.806] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     5.810] (II) Module nouveau: vendor="X.Org Foundation"
[     5.810] 	compiled for 1.17.0, module version = 1.0.11
[     5.810] 	Module class: X.Org Video Driver
[     5.810] 	ABI class: X.Org Video Driver, version 19.0
[     5.810] (II) LoadModule: "nv"
[     5.810] (WW) Warning, couldn't open module nv
[     5.810] (II) UnloadModule: "nv"
[     5.810] (II) Unloading nv
[     5.810] (EE) Failed to load module "nv" (module does not exist, 0)
[     5.810] (II) LoadModule: "modesetting"
[     5.811] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.814] (II) Module modesetting: vendor="X.Org Foundation"
[     5.814] 	compiled for 1.17.1, module version = 1.17.1
[     5.814] 	Module class: X.Org Video Driver
[     5.814] 	ABI class: X.Org Video Driver, version 19.0
[     5.814] (II) LoadModule: "fbdev"
[     5.814] (WW) Warning, couldn't open module fbdev
[     5.814] (II) UnloadModule: "fbdev"
[     5.814] (II) Unloading fbdev
[     5.814] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.814] (II) LoadModule: "vesa"
[     5.814] (WW) Warning, couldn't open module vesa
[     5.814] (II) UnloadModule: "vesa"
[     5.814] (II) Unloading vesa
[     5.814] (EE) Failed to load module "vesa" (module does not exist, 0)
[     5.814] (II) NOUVEAU driver 
[     5.814] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.814] 	RIVA TNT        (NV04)
[     5.814] 	RIVA TNT2       (NV05)
[     5.814] 	GeForce 256     (NV10)
[     5.815] 	GeForce 2       (NV11, NV15)
[     5.815] 	GeForce 4MX     (NV17, NV18)
[     5.815] 	GeForce 3       (NV20)
[     5.815] 	GeForce 4Ti     (NV25, NV28)
[     5.815] 	GeForce FX      (NV3x)
[     5.815] 	GeForce 6       (NV4x)
[     5.815] 	GeForce 7       (G7x)
[     5.815] 	GeForce 8       (G8x)
[     5.815] 	GeForce GTX 200 (NVA0)
[     5.815] 	GeForce GTX 400 (NVC0)
[     5.815] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.815] (++) using VT number 7

[     5.817] (II) [drm] nouveau interface version: 1.2.1
[     5.818] (WW) Falling back to old probe method for modesetting
[     5.818] (II) Loading sub module "dri2"
[     5.818] (II) LoadModule: "dri2"
[     5.818] (II) Module "dri2" already built-in
[     5.818] (--) NOUVEAU(0): Chipset: "NVIDIA NV4B"
[     5.818] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.818] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[     5.818] (==) NOUVEAU(0): RGB weight 888
[     5.818] (==) NOUVEAU(0): Default visual is TrueColor
[     5.818] (==) NOUVEAU(0): Using HW cursor
[     5.818] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[     5.818] (==) NOUVEAU(0): Page flipping enabled
[     5.818] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[     5.818] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[     5.818] (II) NOUVEAU(0): Initializing outputs ...
[     5.847] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[     5.951] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[     5.980] (II) NOUVEAU(0): Output TV-1 has no monitor section
[     5.981] (II) NOUVEAU(0): 3 crtcs needed for screen.
[     5.981] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[     5.981] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[     6.010] (II) NOUVEAU(0): EDID for output DVI-I-1
[     6.049] (II) NOUVEAU(0): EDID for output VGA-1
[     6.049] (II) NOUVEAU(0): Manufacturer: IVM  Model: 6114  Serial#: 2186
[     6.049] (II) NOUVEAU(0): Year: 2014  Week: 46
[     6.049] (II) NOUVEAU(0): EDID Version: 1.3
[     6.049] (II) NOUVEAU(0): Digital Display Input
[     6.049] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[     6.049] (II) NOUVEAU(0): Gamma: 2.20
[     6.049] (II) NOUVEAU(0): DPMS capabilities: Off
[     6.049] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     6.049] (II) NOUVEAU(0): First detailed timing is preferred mode
[     6.049] (II) NOUVEAU(0): redX: 0.648 redY: 0.333   greenX: 0.314 greenY: 0.612
[     6.049] (II) NOUVEAU(0): blueX: 0.149 blueY: 0.059   whiteX: 0.313 whiteY: 0.329
[     6.049] (II) NOUVEAU(0): Supported established timings:
[     6.049] (II) NOUVEAU(0): 640x480@60Hz
[     6.049] (II) NOUVEAU(0): 640x480@67Hz
[     6.050] (II) NOUVEAU(0): 800x600@56Hz
[     6.050] (II) NOUVEAU(0): 800x600@60Hz
[     6.050] (II) NOUVEAU(0): 1024x768@60Hz
[     6.050] (II) NOUVEAU(0): Manufacturer's mask: 0
[     6.050] (II) NOUVEAU(0): Supported standard timings:
[     6.050] (II) NOUVEAU(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[     6.050] (II) NOUVEAU(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[     6.050] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     6.050] (II) NOUVEAU(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[     6.050] (II) NOUVEAU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[     6.050] (II) NOUVEAU(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     6.050] (II) NOUVEAU(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[     6.050] (II) NOUVEAU(0): Supported detailed timing:
[     6.050] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[     6.050] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     6.050] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     6.050] (II) NOUVEAU(0): Serial No: 1128044602186
[     6.050] (II) NOUVEAU(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[     6.050] (II) NOUVEAU(0): Monitor name: PLX2483H
[     6.050] (II) NOUVEAU(0): EDID (in hex):
[     6.050] (II) NOUVEAU(0): 	00ffffffffffff0026cd14618a080000
[     6.050] (II) NOUVEAU(0): 	2e18010380351e782a1b45a655509c26
[     6.050] (II) NOUVEAU(0): 	0f5054330800710081408180a940b300
[     6.050] (II) NOUVEAU(0): 	9500d1c00101023a801871382d40582c
[     6.050] (II) NOUVEAU(0): 	4500132b2100001e000000ff00313132
[     6.050] (II) NOUVEAU(0): 	38303434363032313836000000fd0037
[     6.050] (II) NOUVEAU(0): 	4c1e5311000a202020202020000000fc
[     6.050] (II) NOUVEAU(0): 	00504c5832343833480a2020202000d2
[     6.050] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[     6.050] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     6.050] (II) NOUVEAU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[     6.050] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     6.050] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.077] (II) NOUVEAU(0): EDID for output TV-1
[     6.077] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[     6.077] (II) NOUVEAU(0): Output VGA-1 connected
[     6.077] (II) NOUVEAU(0): Output TV-1 disconnected
[     6.077] (II) NOUVEAU(0): Using exact sizes for initial modes
[     6.077] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080
[     6.077] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     6.077] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[     6.077] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     6.077] (**) NOUVEAU(0):  Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     6.077] (**) NOUVEAU(0):  Mode "1152x720": 67.3 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[     6.077] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[     6.077] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[     6.077] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[     6.077] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[     6.077] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     6.077] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[     6.077] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.077] (==) NOUVEAU(0): DPI set to (96, 96)
[     6.077] (II) Loading sub module "fb"
[     6.077] (II) LoadModule: "fb"
[     6.077] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.079] (II) Module fb: vendor="X.Org Foundation"
[     6.079] 	compiled for 1.17.1, module version = 1.0.0
[     6.079] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.079] (II) Loading sub module "shadowfb"
[     6.079] (II) LoadModule: "shadowfb"
[     6.079] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[     6.080] (II) Module shadowfb: vendor="X.Org Foundation"
[     6.080] 	compiled for 1.17.1, module version = 1.0.0
[     6.080] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.080] (II) UnloadModule: "modesetting"
[     6.080] (II) Unloading modesetting
[     6.080] (--) Depth 24 pixmap format is 32 bpp
[     6.083] (II) NOUVEAU(0): Channel setup complete.
[     6.084] (II) NOUVEAU(0): [DRI2] Setup complete
[     6.084] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[     6.084] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[     6.086] (II) Loading sub module "exa"
[     6.086] (II) LoadModule: "exa"
[     6.086] (II) Loading /usr/lib/xorg/modules/libexa.so
[     6.088] (II) Module exa: vendor="X.Org Foundation"
[     6.088] 	compiled for 1.17.1, module version = 2.6.0
[     6.088] 	ABI class: X.Org Video Driver, version 19.0
[     6.088] (II) EXA(0): Driver allocated offscreen pixmaps
[     6.088] (II) EXA(0): Driver registered support for the following operations:
[     6.088] (II)         Solid
[     6.088] (II)         Copy
[     6.088] (II)         Composite (RENDER acceleration)
[     6.088] (II)         UploadToScreen
[     6.088] (II)         DownloadFromScreen
[     6.088] (==) NOUVEAU(0): Backing store enabled
[     6.088] (==) NOUVEAU(0): Silken mouse enabled
[     6.090] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[     6.090] (II) NOUVEAU(0): [XvMC] Extension initialized.
[     6.090] (==) NOUVEAU(0): DPMS enabled
[     6.090] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     6.092] (--) RandR disabled
[     6.282] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     6.282] (II) AIGLX: enabled GLX_ARB_create_context
[     6.282] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     6.282] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     6.282] (II) AIGLX: enabled GLX_INTEL_swap_event
[     6.282] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     6.282] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     6.282] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     6.282] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     6.283] (II) AIGLX: Loaded and initialized nouveau
[     6.283] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.287] (II) NOUVEAU(0): NVEnterVT is called.
[     6.287] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[     6.287] resize called 1920 1080
[     6.414] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.414] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.414] (**) Power Button: Applying InputClass "Keyboard Layout"
[     6.414] (II) LoadModule: "evdev"
[     6.414] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.422] (II) Module evdev: vendor="X.Org Foundation"
[     6.422] 	compiled for 1.17.1, module version = 2.9.2
[     6.422] 	Module class: X.Org XInput Driver
[     6.422] 	ABI class: X.Org XInput driver, version 21.0
[     6.422] (II) Using input driver 'evdev' for 'Power Button'
[     6.422] (**) Power Button: always reports core events
[     6.422] (**) evdev: Power Button: Device: "/dev/input/event3"
[     6.423] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.423] (--) evdev: Power Button: Found keys
[     6.423] (II) evdev: Power Button: Configuring as keyboard
[     6.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[     6.423] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.423] (**) Option "xkb_rules" "evdev"
[     6.423] (**) Option "xkb_model" "pc104"
[     6.423] (**) Option "xkb_layout" "fr"
[     6.423] (**) Option "xkb_variant" "oss"
[     6.472] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.472] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.472] (**) Power Button: Applying InputClass "Keyboard Layout"
[     6.472] (II) Using input driver 'evdev' for 'Power Button'
[     6.472] (**) Power Button: always reports core events
[     6.472] (**) evdev: Power Button: Device: "/dev/input/event2"
[     6.472] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.472] (--) evdev: Power Button: Found keys
[     6.472] (II) evdev: Power Button: Configuring as keyboard
[     6.472] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[     6.472] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.472] (**) Option "xkb_rules" "evdev"
[     6.472] (**) Option "xkb_model" "pc104"
[     6.472] (**) Option "xkb_layout" "fr"
[     6.472] (**) Option "xkb_variant" "oss"
[     6.473] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[     6.473] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     6.473] (**) Logitech USB Receiver: Applying InputClass "Keyboard Layout"
[     6.473] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     6.473] (**) Logitech USB Receiver: always reports core events
[     6.473] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[     6.473] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     6.473] (--) evdev: Logitech USB Receiver: Found keys
[     6.473] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     6.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/0003:046D:C517.0001/input/input2/event0"
[     6.473] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[     6.473] (**) Option "xkb_rules" "evdev"
[     6.473] (**) Option "xkb_model" "pc104"
[     6.473] (**) Option "xkb_layout" "fr"
[     6.473] (**) Option "xkb_variant" "oss"
[     6.474] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[     6.474] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[     6.474] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     6.474] (**) Logitech USB Receiver: Applying InputClass "Keyboard Layout"
[     6.474] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     6.474] (**) Logitech USB Receiver: always reports core events
[     6.474] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[     6.474] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     6.474] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[     6.474] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[     6.474] (--) evdev: Logitech USB Receiver: Found relative axes
[     6.474] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[     6.474] (--) evdev: Logitech USB Receiver: Found absolute axes
[     6.474] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[     6.474] (--) evdev: Logitech USB Receiver: Found keys
[     6.474] (II) evdev: Logitech USB Receiver: Configuring as mouse
[     6.474] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     6.474] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[     6.474] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[     6.474] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     6.474] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/0003:046D:C517.0002/input/input3/event1"
[     6.474] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[     6.474] (**) Option "xkb_rules" "evdev"
[     6.474] (**) Option "xkb_model" "pc104"
[     6.474] (**) Option "xkb_layout" "fr"
[     6.474] (**) Option "xkb_variant" "oss"
[     6.474] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[     6.475] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[     6.475] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[     6.475] (**) Logitech USB Receiver: (accel) acceleration profile 0
[     6.475] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     6.475] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     6.475] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[     6.475] (II) No input driver specified, ignoring this device.
[     6.475] (II) This device may have been added with another device file.
[     6.476] (II) config/udev: Adding input device UVC Camera (046d:09a2) (/dev/input/event4)
[     6.476] (**) UVC Camera (046d:09a2): Applying InputClass "evdev keyboard catchall"
[     6.476] (**) UVC Camera (046d:09a2): Applying InputClass "Keyboard Layout"
[     6.476] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a2)'
[     6.476] (**) UVC Camera (046d:09a2): always reports core events
[     6.476] (**) evdev: UVC Camera (046d:09a2): Device: "/dev/input/event4"
[     6.476] (--) evdev: UVC Camera (046d:09a2): Vendor 0x46d Product 0x9a2
[     6.476] (--) evdev: UVC Camera (046d:09a2): Found keys
[     6.476] (II) evdev: UVC Camera (046d:09a2): Configuring as keyboard
[     6.476] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input6/event4"
[     6.476] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a2)" (type: KEYBOARD, id 10)
[     6.476] (**) Option "xkb_rules" "evdev"
[     6.476] (**) Option "xkb_model" "pc104"
[     6.476] (**) Option "xkb_layout" "fr"
[     6.476] (**) Option "xkb_variant" "oss"
[     6.477] (II) config/udev: Adding input device PS2++ Logitech Wheel Mouse (/dev/input/event6)
[     6.477] (**) PS2++ Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[     6.477] (II) Using input driver 'evdev' for 'PS2++ Logitech Wheel Mouse'
[     6.477] (**) PS2++ Logitech Wheel Mouse: always reports core events
[     6.477] (**) evdev: PS2++ Logitech Wheel Mouse: Device: "/dev/input/event6"
[     6.477] (--) evdev: PS2++ Logitech Wheel Mouse: Vendor 0x2 Product 0x2
[     6.477] (--) evdev: PS2++ Logitech Wheel Mouse: Found 8 mouse buttons
[     6.477] (--) evdev: PS2++ Logitech Wheel Mouse: Found scroll wheel(s)
[     6.477] (--) evdev: PS2++ Logitech Wheel Mouse: Found relative axes
[     6.477] (--) evdev: PS2++ Logitech Wheel Mouse: Found x and y relative axes
[     6.477] (II) evdev: PS2++ Logitech Wheel Mouse: Configuring as mouse
[     6.477] (II) evdev: PS2++ Logitech Wheel Mouse: Adding scrollwheel support
[     6.477] (**) evdev: PS2++ Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[     6.477] (**) evdev: PS2++ Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     6.477] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event6"
[     6.477] (II) XINPUT: Adding extended input device "PS2++ Logitech Wheel Mouse" (type: MOUSE, id 11)
[     6.477] (II) evdev: PS2++ Logitech Wheel Mouse: initialized for relative axes.
[     6.477] (**) PS2++ Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[     6.477] (**) PS2++ Logitech Wheel Mouse: (accel) acceleration profile 0
[     6.477] (**) PS2++ Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[     6.477] (**) PS2++ Logitech Wheel Mouse: (accel) acceleration threshold: 4
[     6.478] (II) config/udev: Adding input device PS2++ Logitech Wheel Mouse (/dev/input/mouse1)
[     6.478] (II) No input driver specified, ignoring this device.
[     6.478] (II) This device may have been added with another device file.
[     6.478] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     6.478] (II) No input driver specified, ignoring this device.
[     6.478] (II) This device may have been added with another device file.
[     6.534] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event13)
[     6.534] (II) No input driver specified, ignoring this device.
[     6.534] (II) This device may have been added with another device file.
[     6.535] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[     6.536] (II) No input driver specified, ignoring this device.
[     6.536] (II) This device may have been added with another device file.
[     6.539] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event12)
[     6.539] (II) No input driver specified, ignoring this device.
[     6.539] (II) This device may have been added with another device file.
[     6.553] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event11)
[     6.553] (II) No input driver specified, ignoring this device.
[     6.553] (II) This device may have been added with another device file.
[     6.553] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event9)
[     6.553] (II) No input driver specified, ignoring this device.
[     6.553] (II) This device may have been added with another device file.
[     6.554] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event10)
[     6.554] (II) No input driver specified, ignoring this device.
[     6.554] (II) This device may have been added with another device file.
[     6.557] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[     6.557] (II) No input driver specified, ignoring this device.
[     6.557] (II) This device may have been added with another device file.
[    15.203] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    15.203] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    15.203] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    15.203] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    15.203] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    15.203] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    15.203] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    44.777] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    44.777] (II) NOUVEAU(0): Using hsync ranges from config file
[    44.777] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    44.777] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    44.777] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    44.777] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    44.777] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    44.909] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    44.909] (II) NOUVEAU(0): Using hsync ranges from config file
[    44.909] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    44.909] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    44.909] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    44.909] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    44.909] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    44.980] resize called 1920 1080
[    46.724] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    46.724] (II) NOUVEAU(0): Using hsync ranges from config file
[    46.724] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    46.724] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    46.724] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    46.724] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    46.724] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    49.159] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    49.159] (II) NOUVEAU(0): Using hsync ranges from config file
[    49.160] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    49.160] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    49.160] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    49.160] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    49.160] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    49.248] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    49.248] (II) NOUVEAU(0): Using hsync ranges from config file
[    49.248] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    49.248] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    49.248] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    49.248] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    49.248] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    49.469] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    49.469] (II) NOUVEAU(0): Using hsync ranges from config file
[    49.469] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    49.469] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    49.469] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    49.469] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    49.469] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    49.663] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    49.664] (II) NOUVEAU(0): Using hsync ranges from config file
[    49.664] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    49.664] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    49.664] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    49.664] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    49.664] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    49.664] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    49.664] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    49.664] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    49.664] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    49.664] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    49.665] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    49.665] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    49.665] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    49.665] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    49.668] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    49.893] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    49.893] (II) NOUVEAU(0): Using hsync ranges from config file
[    49.893] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    49.893] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    49.893] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    49.893] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    49.893] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    53.879] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    53.879] (II) NOUVEAU(0): Using hsync ranges from config file
[    53.879] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    53.879] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    53.879] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    53.879] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    53.879] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    53.879] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    53.879] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    53.879] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    53.879] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    53.879] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    53.879] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    53.880] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    53.880] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    53.880] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    53.880] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    53.962] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[    53.962] (II) NOUVEAU(0): Using hsync ranges from config file
[    53.962] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    53.962] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    53.963] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    53.963] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    53.963] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[  1443.073] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1443.073] (II) NOUVEAU(0): NVLeaveVT is called.
[  3771.179] (II) AIGLX: Resuming AIGLX clients after VT switch
[  3771.179] (II) NOUVEAU(0): NVEnterVT is called.
[  3771.247] (II) NOUVEAU(0): EDID vendor "IVM", prod id 24852
[  3771.247] (II) NOUVEAU(0): Using hsync ranges from config file
[  3771.247] (II) NOUVEAU(0): Using vrefresh ranges from config file
[  3771.247] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  3771.247] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  3771.247] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  3771.247] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  3771.247] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  3771.247] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  3771.247] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  3771.247] (II) NOUVEAU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
[  3771.247] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  3771.247] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  3771.248] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  3771.248] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  3771.248] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  3771.248] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Seb

Archlinux sur AMD64 (xfce / lightdm)
Avatar de l’utilisateur
waitnsea
Maître du Kyudo
Messages : 2114
Inscription : jeu. 15 mars 2012, 05:08

Re: [Xorg] Freez a repetition

Message par waitnsea »

lesebas a écrit :hard reset seul solution
Juste un détail, le hard reset n'étant pas toujours inoffensif, as-tu mis en place les Magic Keys ?
Avatar de l’utilisateur
lesebas
Chu Ko Nu
Messages : 339
Inscription : ven. 01 févr. 2013, 19:16

Re: [Xorg] Freez a repetition

Message par lesebas »

Salut,

Oui j'ai activé les "magic keys" mais même avec REISUB quand ca redemerre le disque efface des inod orphelins...

Bon j'ai réinstallé le pilote nvidia (version 304 pour ma geforce 7300) et supprimé nouveau. Ça redémarre sans problème, par contre impossible de changer d'utilisateur. J'utilise lightdm : quand ça bascule vers le greeter : écran noir avec un curseur clignotant hyper rapide en haut à gauche. Si je ferme la session pas problème je revient à l'écran de connexion.

Extrait de Xorg.1.log (rien de proban dans Xorg.0.log) :

Code : Tout sélectionner

[    82.911] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[    82.911] X Protocol Version 11, Revision 0
[    82.911] Build Operating System: Linux 3.19.2-1-ARCH x86_64 
[    82.911] Current Operating System: Linux Lupus 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64
[    82.911] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=394aa8ac-15f0-4ad5-835f-1f72d2e8113d rw quiet
[    82.911] Build Date: 14 April 2015  10:34:18AM
[    82.911]  
[    82.911] Current version of pixman: 0.32.6
[    82.911] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    82.911] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    82.911] (==) Log file: "/var/log/Xorg.1.log", Time: Wed May 20 22:10:05 2015
[    82.911] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    82.911] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    82.912] (==) No Layout section.  Using the first Screen section.
[    82.912] (==) No screen section available. Using defaults.
[    82.912] (**) |-->Screen "Default Screen Section" (0)
[    82.912] (**) |   |-->Monitor "<default monitor>"
[    82.912] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    82.912] (==) Automatically adding devices
[    82.912] (==) Automatically enabling devices
[    82.912] (==) Automatically adding GPU devices
[    82.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[    82.912] 	Entry deleted from font path.
[    82.912] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[    82.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    82.912] 	Entry deleted from font path.
[    82.912] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    82.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    82.912] 	Entry deleted from font path.
[    82.912] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    82.912] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    82.912] (==) ModulePath set to "/usr/lib/xorg/modules"
[    82.912] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    82.912] (II) Loader magic: 0x815d80
[    82.912] (II) Module ABI versions:
[    82.912] 	X.Org ANSI C Emulation: 0.4
[    82.912] 	X.Org Video Driver: 19.0
[    82.912] 	X.Org XInput driver : 21.0
[    82.912] 	X.Org Server Extension : 9.0
[    82.914] (EE) systemd-logind: failed to get session: PID 1940 does not belong to any known session
[    82.914] (II) xfree86: Adding drm device (/dev/dri/card0)
[    82.914] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    82.916] (--) PCI:*(0:4:0:0) 10de:0393:1043:8276 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, I/O @ 0x00007c00/128, BIOS @ 0x????????/131072
[    82.916] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    82.916] (II) LoadModule: "glx"
[    82.916] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    82.934] (II) Module glx: vendor="NVIDIA Corporation"
[    82.934] 	compiled for 4.0.2, module version = 1.0.0
[    82.934] 	Module class: X.Org Server Extension
[    82.934] (II) NVIDIA GLX Module  304.125  Mon Dec  1 20:22:48 PST 2014
[    82.934] (==) Matched nouveau as autoconfigured driver 0
[    82.934] (==) Matched nv as autoconfigured driver 1
[    82.934] (==) Matched modesetting as autoconfigured driver 2
[    82.934] (==) Matched fbdev as autoconfigured driver 3
[    82.934] (==) Matched vesa as autoconfigured driver 4
[    82.934] (==) Assigned the driver to the xf86ConfigLayout
[    82.934] (II) LoadModule: "nouveau"
[    82.934] (WW) Warning, couldn't open module nouveau
[    82.934] (II) UnloadModule: "nouveau"
[    82.934] (II) Unloading nouveau
[    82.934] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    82.934] (II) LoadModule: "nv"
[    82.935] (WW) Warning, couldn't open module nv
[    82.935] (II) UnloadModule: "nv"
[    82.935] (II) Unloading nv
[    82.935] (EE) Failed to load module "nv" (module does not exist, 0)
[    82.935] (II) LoadModule: "modesetting"
[    82.935] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    82.935] (II) Module modesetting: vendor="X.Org Foundation"
[    82.935] 	compiled for 1.17.1, module version = 1.17.1
[    82.935] 	Module class: X.Org Video Driver
[    82.935] 	ABI class: X.Org Video Driver, version 19.0
[    82.935] (II) LoadModule: "fbdev"
[    82.935] (WW) Warning, couldn't open module fbdev
[    82.935] (II) UnloadModule: "fbdev"
[    82.935] (II) Unloading fbdev
[    82.935] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    82.935] (II) LoadModule: "vesa"
[    82.935] (WW) Warning, couldn't open module vesa
[    82.935] (II) UnloadModule: "vesa"
[    82.935] (II) Unloading vesa
[    82.935] (EE) Failed to load module "vesa" (module does not exist, 0)
[    82.935] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    82.935] (++) using VT number 8

[    82.936] (WW) Falling back to old probe method for modesetting
[    82.936] (EE) Screen 0 deleted because of no matching config section.
[    82.936] (II) UnloadModule: "modesetting"
[    82.936] (EE) Device(s) detected, but none match those in the config file.
[    82.936] (EE) 
Fatal server error:
[    82.936] (EE) no screens found(EE) 
[    82.936] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    82.936] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[    82.936] (EE) 
[    82.966] (EE) Server terminated with error (1). Closing log file.
Seb

Archlinux sur AMD64 (xfce / lightdm)
Avatar de l’utilisateur
benjarobin
Maître du Kyudo
Messages : 17235
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [Xorg] Freez a repetition

Message par benjarobin »

Tu peux essayer de créer le fichier /etc/X11/Xwrapper.config en forçant les droits root et en donnant l'accès à tout le monde. Voir man Xwrapper.config
Dans le doute peux tu donner la sortie de :

Code : Tout sélectionner

grep -REv "^ *$|^ *#" /etc/modprobe.d/ /usr/lib/modprobe.d /etc/modules-load.d /usr/lib/modules-load.d/ /etc/mkinitcpio.conf /etc/X11/xorg*
cat /proc/cmdline
pacman -Qqs nvidia
pacman -Qqs nouveau
lsmod
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Avatar de l’utilisateur
lesebas
Chu Ko Nu
Messages : 339
Inscription : ven. 01 févr. 2013, 19:16

Re: [Xorg] Freez a repetition

Message par lesebas »

benjarobin a écrit :Dans le doute peux tu donner la sortie de :

Code : Tout sélectionner

grep -REv "^ *$|^ *#" /etc/modprobe.d/ /usr/lib/modprobe.d /etc/modules-load.d /usr/lib/modules-load.d/ /etc/mkinitcpio.conf /etc/X11/xorg*
cat /proc/cmdline
pacman -Qqs nvidia
pacman -Qqs nouveau
lsmod
Voila :

Code : Tout sélectionner

[sebastien@Lupus ~]$ sudo grep -REv "^ *$|^ *#" /etc/modprobe.d/ /usr/lib/modprobe.d /etc/modules-load.d /usr/lib/modules-load.d/ /etc/mkinitcpio.conf /etc/X11/xorg*
[sudo] password for sebastien: 
/etc/modprobe.d/modprobe.conf:blacklist b43legacy
/etc/modprobe.d/modprobe.conf:blacklist bcma
/etc/modprobe.d/nob43legacy.conf:blacklist b43legacy
/etc/modprobe.d/nob43legacy.conf:blacklist bcma
/etc/modprobe.d/alsa-base.conf:options snd slots=snd_hda_intel,snd_usb_audio
/etc/modprobe.d/alsa-base.conf:options snd_hda_intel index=0
/etc/modprobe.d/alsa-base.conf:options snd_usb_audio index=1
/usr/lib/modprobe.d/bluetooth-usb.conf:options btusb reset=1
/usr/lib/modprobe.d/nvidia.conf:blacklist nouveau
/usr/lib/modprobe.d/usb-load-ehci-first.conf:softdep ohci_hcd pre: ehci_hcd
/usr/lib/modprobe.d/usb-load-ehci-first.conf:softdep uhci_hcd pre: ehci_hcd
/etc/mkinitcpio.conf:MODULES=""
/etc/mkinitcpio.conf:BINARIES=""
/etc/mkinitcpio.conf:FILES=""
/etc/mkinitcpio.conf:HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
/etc/X11/xorg.conf.backup:Section "ServerLayout"
/etc/X11/xorg.conf.backup:    Identifier     "Layout0"
/etc/X11/xorg.conf.backup:    Screen      0  "Screen0" 0 0
/etc/X11/xorg.conf.backup:    InputDevice    "Keyboard0" "CoreKeyboard"
/etc/X11/xorg.conf.backup:    InputDevice    "Mouse0" "CorePointer"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Files"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "InputDevice"
/etc/X11/xorg.conf.backup:    Identifier     "Mouse0"
/etc/X11/xorg.conf.backup:    Driver         "mouse"
/etc/X11/xorg.conf.backup:    Option         "Protocol" "auto"
/etc/X11/xorg.conf.backup:    Option         "Device" "/dev/psaux"
/etc/X11/xorg.conf.backup:    Option         "Emulate3Buttons" "no"
/etc/X11/xorg.conf.backup:    Option         "ZAxisMapping" "4 5"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "InputDevice"
/etc/X11/xorg.conf.backup:    Identifier     "Keyboard0"
/etc/X11/xorg.conf.backup:    Driver         "kbd"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Monitor"
/etc/X11/xorg.conf.backup:    Identifier     "Monitor0"
/etc/X11/xorg.conf.backup:    VendorName     "Unknown"
/etc/X11/xorg.conf.backup:    ModelName      "Unknown"
/etc/X11/xorg.conf.backup:    HorizSync       28.0 - 33.0
/etc/X11/xorg.conf.backup:    VertRefresh     43.0 - 72.0
/etc/X11/xorg.conf.backup:    Option         "DPMS"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Device"
/etc/X11/xorg.conf.backup:    Identifier     "Device0"
/etc/X11/xorg.conf.backup:    Driver         "nvidia"
/etc/X11/xorg.conf.backup:    VendorName     "NVIDIA Corporation"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Screen"
/etc/X11/xorg.conf.backup:    Identifier     "Screen0"
/etc/X11/xorg.conf.backup:    Device         "Device0"
/etc/X11/xorg.conf.backup:    Monitor        "Monitor0"
/etc/X11/xorg.conf.backup:    DefaultDepth    24
/etc/X11/xorg.conf.backup:    SubSection     "Display"
/etc/X11/xorg.conf.backup:        Depth       24
/etc/X11/xorg.conf.backup:    EndSubSection
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:    Identifier        "Keyboard Layout"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:    MatchIsKeyboard   "yes"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:    MatchDevicePath   "/dev/input/event*"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:    Option            "XkbLayout" "fr"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:    Option            "XkbVariant" "oss" 
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:EndSection
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:	
/etc/X11/xorg.conf.oldnvidia304:Section "ServerLayout"
/etc/X11/xorg.conf.oldnvidia304:    Identifier     "Layout0"
/etc/X11/xorg.conf.oldnvidia304:    Screen      0  "Screen0" 0 0
/etc/X11/xorg.conf.oldnvidia304:    InputDevice    "Keyboard0" "CoreKeyboard"
/etc/X11/xorg.conf.oldnvidia304:    InputDevice    "Mouse0" "CorePointer"
/etc/X11/xorg.conf.oldnvidia304:    Option         "Xinerama" "0"
/etc/X11/xorg.conf.oldnvidia304:EndSection
/etc/X11/xorg.conf.oldnvidia304:Section "Files"
/etc/X11/xorg.conf.oldnvidia304:EndSection
/etc/X11/xorg.conf.oldnvidia304:Section "InputDevice"
/etc/X11/xorg.conf.oldnvidia304:    Identifier     "Mouse0"
/etc/X11/xorg.conf.oldnvidia304:    Driver         "mouse"
/etc/X11/xorg.conf.oldnvidia304:    Option         "Protocol" "auto"
/etc/X11/xorg.conf.oldnvidia304:    Option         "Device" "/dev/psaux"
/etc/X11/xorg.conf.oldnvidia304:    Option         "Emulate3Buttons" "no"
/etc/X11/xorg.conf.oldnvidia304:    Option         "ZAxisMapping" "4 5"
/etc/X11/xorg.conf.oldnvidia304:EndSection
/etc/X11/xorg.conf.oldnvidia304:Section "InputDevice"
/etc/X11/xorg.conf.oldnvidia304:    Identifier     "Keyboard0"
/etc/X11/xorg.conf.oldnvidia304:    Driver         "kbd"
/etc/X11/xorg.conf.oldnvidia304:EndSection
/etc/X11/xorg.conf.oldnvidia304:Section "Monitor"
/etc/X11/xorg.conf.oldnvidia304:    Identifier     "Monitor0"
/etc/X11/xorg.conf.oldnvidia304:    VendorName     "Unknown"
/etc/X11/xorg.conf.oldnvidia304:    ModelName      "DELL E2009W"
/etc/X11/xorg.conf.oldnvidia304:    HorizSync       30.0 - 83.0
/etc/X11/xorg.conf.oldnvidia304:    VertRefresh     56.0 - 75.0
/etc/X11/xorg.conf.oldnvidia304:    Option         "DPMS"
/etc/X11/xorg.conf.oldnvidia304:EndSection
/etc/X11/xorg.conf.oldnvidia304:Section "Device"
/etc/X11/xorg.conf.oldnvidia304:    Identifier     "Device0"
/etc/X11/xorg.conf.oldnvidia304:    Driver         "nvidia"
/etc/X11/xorg.conf.oldnvidia304:    VendorName     "NVIDIA Corporation"
/etc/X11/xorg.conf.oldnvidia304:    BoardName      "GeForce 7300 GT"
/etc/X11/xorg.conf.oldnvidia304:EndSection
/etc/X11/xorg.conf.oldnvidia304:Section "Screen"
/etc/X11/xorg.conf.oldnvidia304:    Identifier     "Screen0"
/etc/X11/xorg.conf.oldnvidia304:    Device         "Device0"
/etc/X11/xorg.conf.oldnvidia304:    Monitor        "Monitor0"
/etc/X11/xorg.conf.oldnvidia304:    DefaultDepth    24
/etc/X11/xorg.conf.oldnvidia304:    Option         "Stereo" "0"
/etc/X11/xorg.conf.oldnvidia304:    Option         "nvidiaXineramaInfoOrder" "CRT-0"
/etc/X11/xorg.conf.oldnvidia304:    Option         "metamodes" "nvidia-auto-select +0+0"
/etc/X11/xorg.conf.oldnvidia304:    SubSection     "Display"
/etc/X11/xorg.conf.oldnvidia304:        Depth       24
/etc/X11/xorg.conf.oldnvidia304:    EndSubSection
/etc/X11/xorg.conf.oldnvidia304:EndSection
[sebastien@Lupus ~]$ sudo cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=394aa8ac-15f0-4ad5-835f-1f72d2e8113d rw quiet
[sebastien@Lupus ~]$ sudo pacman -Qqs nvidia
lib32-nvidia-304xx-libgl
lib32-nvidia-304xx-utils
libcl
libvdpau
nvidia-304xx
nvidia-304xx-libgl
nvidia-304xx-utils
[sebastien@Lupus ~]$ sudo pacman -Qqs nouveau
lib32-mesa
mesa
[sebastien@Lupus ~]$ sudo lsmod
Module                  Size  Used by
rfcomm                 65536  4 
bnep                   20480  2 
bluetooth             442368  8 bnep,rfcomm
fuse                   90112  5 
snd_hda_codec_analog    16384  1 
snd_hda_codec_generic    65536  1 snd_hda_codec_analog
nvidia              11317248  51 
drm                   282624  3 nvidia
arc4                   16384  2 
b43                   413696  0 
led_class              16384  1 b43
bcma                   49152  1 b43
mac80211              655360  1 b43
cfg80211              483328  2 b43,mac80211
rfkill                 24576  4 cfg80211,bluetooth
rng_core               16384  1 b43
ppdev                  20480  0 
powernow_k8            28672  0 
kvm_amd                65536  0 
kvm                   446464  1 kvm_amd
pcspkr                 16384  0 
psmouse               110592  0 
serio_raw              16384  0 
edac_core              49152  0 
k8temp                 16384  0 
edac_mce_amd           24576  0 
uvcvideo               86016  0 
snd_usb_audio         151552  0 
snd_usbmidi_lib        28672  1 snd_usb_audio
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
snd_rawmidi            28672  1 snd_usbmidi_lib
videobuf2_core         40960  1 uvcvideo
snd_seq_device         16384  1 snd_rawmidi
v4l2_common            16384  1 videobuf2_core
videodev              135168  3 uvcvideo,v4l2_common,videobuf2_core
joydev                 20480  0 
mousedev               20480  0 
evdev                  24576  8 
mac_hid                16384  0 
media                  20480  2 uvcvideo,videodev
raid1                  36864  1 
md_mod                118784  2 raid1
shpchp                 36864  0 
snd_hda_intel          28672  2 
snd_hda_controller     28672  1 snd_hda_intel
snd_hda_codec         114688  4 snd_hda_codec_generic,snd_hda_intel,snd_hda_controller,snd_hda_codec_analog
snd_hwdep              16384  2 snd_usb_audio,snd_hda_codec
ssb                    65536  1 b43
snd_pcm                90112  4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
mmc_core              110592  2 b43,ssb
snd_timer              28672  1 snd_pcm
pcmcia                 53248  2 b43,ssb
snd                    69632  15 snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_analog
forcedeth              65536  0 
pcmcia_core            20480  1 pcmcia
soundcore              16384  2 snd,snd_hda_codec
parport_pc             28672  0 
nv_tco                 16384  0 
parport                36864  2 ppdev,parport_pc
i2c_nforce2            16384  0 
fan                    16384  0 
thermal                20480  0 
i2c_core               53248  5 drm,nvidia,v4l2_common,i2c_nforce2,videodev
asus_atk0110           20480  0 
hwmon                  16384  2 asus_atk0110,k8temp
acpi_cpufreq           20480  0 
processor              28672  2 powernow_k8,acpi_cpufreq
button                 16384  0 
sch_fq_codel           20480  3 
ext4                  512000  2 
crc16                  16384  2 ext4,bluetooth
mbcache                20480  1 ext4
jbd2                   90112  1 ext4
uas                    24576  0 
usb_storage            61440  1 uas
sd_mod                 36864  6 
sr_mod                 24576  0 
cdrom                  53248  1 sr_mod
hid_logitech           28672  0 
ff_memless             16384  1 hid_logitech
ata_generic            16384  0 
usbhid                 49152  0 
pata_acpi              16384  0 
hid                   110592  2 hid_logitech,usbhid
atkbd                  24576  0 
libps2                 16384  2 atkbd,psmouse
pata_jmicron           16384  0 
ahci                   36864  1 
libahci                28672  1 ahci
xhci_pci               16384  0 
xhci_hcd              155648  1 xhci_pci
sata_nv                32768  2 
pata_amd               20480  0 
firewire_ohci          45056  0 
firewire_core          57344  1 firewire_ohci
crc_itu_t              16384  1 firewire_core
ohci_pci               16384  0 
ohci_hcd               45056  1 ohci_pci
ehci_pci               16384  0 
libata                184320  7 ahci,pata_acpi,sata_nv,libahci,pata_amd,ata_generic,pata_jmicron
ehci_hcd               73728  1 ehci_pci
usbcore               200704  12 uas,snd_usb_audio,uvcvideo,usb_storage,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd,xhci_pci
scsi_mod              147456  5 uas,usb_storage,libata,sd_mod,sr_mod
usb_common             16384  1 usbcore
i8042                  20480  1 libps2
serio                  20480  6 serio_raw,atkbd,i8042,psmouse
[sebastien@Lupus ~]$ 
Seb

Archlinux sur AMD64 (xfce / lightdm)
Avatar de l’utilisateur
lesebas
Chu Ko Nu
Messages : 339
Inscription : ven. 01 févr. 2013, 19:16

Re: [Xorg] Freez a repetition

Message par lesebas »

Salut,

J'ai créé un fichier /etc/X11/Xwrapper.config :

Code : Tout sélectionner

allowed_users=anybody
needs_root_rights=yes
Mais ça ne marche pas mieux. Rétrogradation de lightdm en 1.12 ne marcha pas non plus!
Seb

Archlinux sur AMD64 (xfce / lightdm)
Avatar de l’utilisateur
lesebas
Chu Ko Nu
Messages : 339
Inscription : ven. 01 févr. 2013, 19:16

Re: [Xorg] Freez a repetition

Message par lesebas »

Finalement complètement résolu, voir mon post suivant :

viewtopic.php?f=6&t=17377
Seb

Archlinux sur AMD64 (xfce / lightdm)
Répondre