[xorg] Quel repo choisir ?

[AchilleFraisse]

Bonjour,
Lors de l'installation de xorg, il me demande de choisiri entre :
- mesa-libgl
- nvidia-304xx-libgl
- nvidia-340xx-libgl
- nvidia-libgl

Mais je ne sais pas lequel choisir... Quelle est la différence entre chaque ?

Voici le résultat de la commande lscpi :

Code : Tout sélectionner

00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 8 Series Thermal (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev bb)
03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

[benjarobin]

Bonjour,
Ton PC a apparemment la technologie optimus, donc tu dois choisir ce que tu désires utiliser comme couple de driver.

[AchilleFraisse]

Oui, je confirme que mon PC a la technologie optimus.
Mais justement je ne sais pas quel couple de driver choisir

[AchilleFraisse]

J'ai finalement installé mesa ainsi que xf86-input-evdev.
Ensuite, le wikia dit de lancer une session graphique sous X puis de regarder les log pour savoir quel pilote graphique installer.
Dans mes logs, je vois :

Code : Tout sélectionner

Failed to load module intel
Failed to load module fbdev
Failed to load module vesa

Ca veut dire qu'il faut que j'installe les 3 pilotes :

Code : Tout sélectionner

xf86-video-fbdev
xf86-video-intel
xf86-video-vesa

??

[benjarobin]

Non. Avec la technologie optimus tu dois au minimum installer le driver xf86-video-intel et donc mesa-libgl, après pour la partie nvidia tu n'est pas obligé d'installer un driver. Tu peux juste si tu le veux installer le module pour couper son alimentation

[AchilleFraisse]

Ok, c'est bien ce que j'avais installé.
J'ai installé jusqu'à présent :

Code : Tout sélectionner

xorg-server, xorg-xinit, xorg-server-utils (mesa-libgl, xf86-input-evdev)
xf86-video-intel, xf86-input-synaptics
xorg-twm, xorg-xclock, xterm (pour le test du fichier .xinitrc se trouvant dans /etc/X11/xinit)

Donc si j'ai bien compris, pour l'instant il y a juste ma carte graphique du processeur intel qui travaille ?

J'ai pas bien compris :

Tu peux juste si tu le veux installer le module pour couper son alimentation

[benjarobin]

Tu peux via différentes techniques plus ou moins compliquées, réaliser le rendu d'une application graphique via la carte Nvidia. Mais à moins de vouloir lancer des jeux, il est rarement intéressant de faire le rendu par la carte, donc pour augmenter l'autonomie de la carte Nvidia, on eut tout simplement couper son alimentation.

[AchilleFraisse]

Ben pourquoi pas .
Quel est le module à installer pour couper l'alimentation de la carte ?

[benjarobin]

C'est le module bbswitch Il faut créer le fichier de configuration suivant : /etc/modprobe.d/bbswitch.conf

Code : Tout sélectionner

options bbswitch load_state=0 unload_state=1

Puis le fait de charger ce module via modprobe devrait économiser de la batterie...
Pour automatiser le chargement du module :

Code : Tout sélectionner

echo bbswitch > /etc/modules-load.d/bbswitch.conf

[AchilleFraisse]

Ok, merci !
Et est-ce que c'est normal que mon conky m'affiche une température du processeur de 60-75° avec une fréquence du CPU de 2400Hz (le max je crois ;( ).
Je n'ais pourtant rien touché.

Caractéristique de mon PC : RAM 8 Go
Processeur : Intel Core I5-4210U

Mon conky me dit que c'est Xorg qui consomme le plus, pourtant je n'ais installé que ce que :

Code : Tout sélectionner

xorg-server, xorg-xinit, xorg-server-utils (mesa-libgl, xf86-input-evdev)
xf86-video-intel, xf86-input-synaptics
xorg-twm, xorg-xclock, xterm (pour le test du fichier .xinitrc se trouvant dans /etc/X11/xinit)

Puis dwm en téléchargeant les sources et on les recompilant.

[Xorg]

Ok, merci !
Et est-ce que c'est normal que mon conky m'affiche une température du processeur de 60-75° avec une fréquence du CPU de 2400Hz (le max je crois ;( ).
Je n'ais pourtant rien touché.

En même temps un ordinateur portable, c'est pas le top niveau refroidissement. Est-ce que tu as pensé à le nettoyer (le démonter pour retirer la poussière) ? Ça ne fait pas de mal une fois par an.
2400MHz tu veux dire à mon avis. Ce genre de modèle est censé réguler automatiquement sa fréquence. S'il est toujours à sa fréquence maximale, ce n'est pas normal, et c'est normal que ça chauffe.

Quand X pompe autant, ça peut venir d'un défaut d'accélération matérielle. Est-ce que tu es sûr qu'il utilise bien le module i915 et pas autre chose (genre vesa) ? Postes le log de X si tu veux.

[AchilleFraisse]

Lors de l'installation de xorg, j'ai choisi mesa-libgl, mais ensuite il me demandait aussi de choisir entre xf86-input-evdev et xf86-input-libinput.
Il fallait prendre lequel ?

[AchilleFraisse]

Si j'ai bien compris, xf86-input-libinput remplace xf86-input-evdev (ainsi que tous les paquet commençant par xf86-input-*) .
Donc il faudrait plutôt installer xf86-input-libinput ?

Mais dans ce cas, pas besoin d'installer xf86-input-synaptics ? Mais mon fichier de configuration 50-synaptics.conf sera toujours valable ?

[Xorg]

Oui, utilise xf86-input-libinput.

This driver can be used as as drop-in replacement for evdev and synaptics.

Tip: You might have to manually remove the synaptics configuration, probably at /etc/X11/xorg.conf.d/50-synaptics.conf, to make a touchpad work correctly with libinput.

Tout est dit dans le wiki libinput.

[AchilleFraisse]

Ca n'a rien changé.

Voilà les log de xorg :

Code : Tout sélectionner

[  1965.674] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[  1965.676] X Protocol Version 11, Revision 0
[  1965.677] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[  1965.678] Current Operating System: Linux 4.5.4-1-ARCH #1 SMP PREEMPT Wed May 11 22:21:28 CEST 2016 x86_64
[  1965.678] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a54b191d-72c1-46fd-abf5-6092df6121e6 rw quiet
[  1965.680] Build Date: 05 April 2016  05:24:02PM
[  1965.681]  
[  1965.682] Current version of pixman: 0.34.0
[  1965.683] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1965.683] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1965.687] (==) Log file: "/home/user/.local/share/xorg/Xorg.0.log", Time: Wed May 18 22:39:10 2016
[  1965.688] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1965.688] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1965.688] (==) No Layout section.  Using the first Screen section.
[  1965.688] (==) No screen section available. Using defaults.
[  1965.688] (**) |-->Screen "Default Screen Section" (0)
[  1965.688] (**) |   |-->Monitor "<default monitor>"
[  1965.689] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  1965.689] (**) |   |-->Device "Intel Graphics"
[  1965.689] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1965.689] (==) Automatically adding devices
[  1965.689] (==) Automatically enabling devices
[  1965.689] (==) Automatically adding GPU devices
[  1965.689] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1965.689] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1965.689] 	Entry deleted from font path.
[  1965.689] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  1965.689] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1965.689] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1965.689] (II) Loader magic: 0x819d20
[  1965.689] (II) Module ABI versions:
[  1965.689] 	X.Org ANSI C Emulation: 0.4
[  1965.689] 	X.Org Video Driver: 20.0
[  1965.689] 	X.Org XInput driver : 22.1
[  1965.689] 	X.Org Server Extension : 9.0
[  1965.689] (++) using VT number 2

[  1965.689] (--) controlling tty is VT number 2, auto-enabling KeepTty
[  1965.691] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[  1965.691] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1965.692] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  1965.693] (--) PCI:*(0:0:2:0) 8086:0a16:1043:167d rev 11, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[  1965.693] (--) PCI: (0:3:0:0) 10de:1341:1043:167d rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  1965.693] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1965.693] (II) LoadModule: "glx"
[  1965.693] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1965.694] (II) Module glx: vendor="X.Org Foundation"
[  1965.694] 	compiled for 1.18.3, module version = 1.0.0
[  1965.694] 	ABI class: X.Org Server Extension, version 9.0
[  1965.694] (==) AIGLX enabled
[  1965.694] (II) LoadModule: "intel"
[  1965.694] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1965.694] (II) Module intel: vendor="X.Org Foundation"
[  1965.694] 	compiled for 1.18.3, module version = 2.99.917
[  1965.694] 	Module class: X.Org Video Driver
[  1965.694] 	ABI class: X.Org Video Driver, version 20.0
[  1965.694] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  1965.694] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[  1965.694] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[  1965.694] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[  1965.694] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[  1965.695] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  1965.695] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1965.695] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  1965.695] (==) intel(0): RGB weight 888
[  1965.695] (==) intel(0): Default visual is TrueColor
[  1965.695] (**) intel(0): Option "AccelMethod" "uxa"
[  1965.695] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[  1965.695] (**) intel(0): Relaxed fencing enabled
[  1965.695] (**) intel(0): Wait on SwapBuffers? enabled
[  1965.695] (**) intel(0): Triple buffering? enabled
[  1965.695] (**) intel(0): Framebuffer tiled
[  1965.695] (**) intel(0): Pixmaps tiled
[  1965.695] (**) intel(0): 3D buffers tiled
[  1965.695] (**) intel(0): SwapBuffers wait enabled
[  1965.695] (==) intel(0): video overlay key set to 0x101fe
[  1965.695] (II) intel(0): Output eDP1 has no monitor section
[  1965.695] (--) intel(0): found backlight control interface intel_backlight
[  1965.696] (II) intel(0): Output DP1 has no monitor section
[  1965.799] (II) intel(0): Output HDMI1 has no monitor section
[  1965.906] (II) intel(0): Output HDMI2 has no monitor section
[  1965.907] (II) intel(0): EDID for output eDP1
[  1965.907] (II) intel(0): Manufacturer: CMN  Model: 1361  Serial#: 0
[  1965.907] (II) intel(0): Year: 2014  Week: 7
[  1965.907] (II) intel(0): EDID Version: 1.4
[  1965.907] (II) intel(0): Digital Display Input
[  1965.907] (II) intel(0): 8 bits per channel
[  1965.907] (II) intel(0): Digital interface is DisplayPort
[  1965.907] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 17
[  1965.907] (II) intel(0): Gamma: 2.20
[  1965.907] (II) intel(0): No DPMS capabilities specified
[  1965.907] (II) intel(0): Supported color encodings: RGB 4:4:4 
[  1965.907] (II) intel(0): First detailed timing is preferred mode
[  1965.907] (II) intel(0): Preferred mode is native pixel format and refresh rate
[  1965.907] (II) intel(0): redX: 0.640 redY: 0.340   greenX: 0.308 greenY: 0.615
[  1965.907] (II) intel(0): blueX: 0.150 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[  1965.907] (II) intel(0): Manufacturer's mask: 0
[  1965.907] (II) intel(0): Supported detailed timing:
[  1965.907] (II) intel(0): clock: 138.8 MHz   Image Size:  293 x 165 mm
[  1965.907] (II) intel(0): h_active: 1920  h_sync: 1966  h_sync_end 1996 h_blank_end 2080 h_border: 0
[  1965.907] (II) intel(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1112 v_border: 0
[  1965.907] (II) intel(0): Supported detailed timing:
[  1965.907] (II) intel(0): clock: 92.5 MHz   Image Size:  293 x 165 mm
[  1965.907] (II) intel(0): h_active: 1920  h_sync: 1966  h_sync_end 1996 h_blank_end 2080 h_border: 0
[  1965.907] (II) intel(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1112 v_border: 0
[  1965.907] (II) intel(0):  CMN
[  1965.907] (II) intel(0):  N133HSE-EA3
[  1965.907] (II) intel(0): EDID (in hex):
[  1965.907] (II) intel(0): 	00ffffffffffff000dae611300000000
[  1965.907] (II) intel(0): 	07180104a51d117802ce85a3574e9d26
[  1965.907] (II) intel(0): 	12505400000001010101010101010101
[  1965.907] (II) intel(0): 	010101010101363680a0703820402e1e
[  1965.907] (II) intel(0): 	240025a510000018242480a070382040
[  1965.907] (II) intel(0): 	2e1e240025a510000018000000fe0043
[  1965.907] (II) intel(0): 	4d4e0a202020202020202020000000fe
[  1965.907] (II) intel(0): 	004e3133334853452d4541330a2000a1
[  1965.907] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  1965.907] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  1965.907] (II) intel(0): Printing probed modes for output eDP1
[  1965.907] (II) intel(0): Modeline "1920x1080"x60.0  138.78  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[  1965.907] (II) intel(0): Modeline "1920x1080"x40.0   92.52  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[  1965.907] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  1965.907] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  1965.907] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  1965.907] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  1965.907] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  1965.907] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  1965.907] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  1965.907] (II) intel(0): EDID for output DP1
[  1966.013] (II) intel(0): EDID for output HDMI1
[  1966.119] (II) intel(0): EDID for output HDMI2
[  1966.119] (II) intel(0): Output eDP1 connected
[  1966.119] (II) intel(0): Output DP1 disconnected
[  1966.119] (II) intel(0): Output HDMI1 disconnected
[  1966.119] (II) intel(0): Output HDMI2 disconnected
[  1966.119] (II) intel(0): Using exact sizes for initial modes
[  1966.119] (II) intel(0): Output eDP1 using initial mode 1920x1080 +0+0
[  1966.120] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1966.120] (II) intel(0): Kernel page flipping support detected, enabling
[  1966.120] (==) intel(0): DPI set to (96, 96)
[  1966.120] (II) Loading sub module "fb"
[  1966.120] (II) LoadModule: "fb"
[  1966.120] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1966.120] (II) Module fb: vendor="X.Org Foundation"
[  1966.120] 	compiled for 1.18.3, module version = 1.0.0
[  1966.120] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1966.120] (II) Loading sub module "dri2"
[  1966.120] (II) LoadModule: "dri2"
[  1966.120] (II) Module "dri2" already built-in
[  1966.120] (==) Depth 24 pixmap format is 32 bpp
[  1966.120] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[  1966.121] (II) UXA(0): Driver registered support for the following operations:
[  1966.121] (II)         solid
[  1966.121] (II)         copy
[  1966.121] (II)         composite (RENDER acceleration)
[  1966.121] (II)         put_image
[  1966.121] (II)         get_image
[  1966.121] (II) intel(0): [DRI2] Setup complete
[  1966.121] (II) intel(0): [DRI2]   DRI driver: i965
[  1966.121] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[  1966.121] (==) intel(0): Backing store enabled
[  1966.121] (==) intel(0): Silken mouse enabled
[  1966.121] (II) intel(0): Initializing HW Cursor
[  1966.121] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1966.121] (==) intel(0): DPMS enabled
[  1966.121] (==) intel(0): Intel XvMC decoder enabled
[  1966.121] (II) intel(0): Set up textured video
[  1966.121] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[  1966.121] (II) intel(0): DRI2: Enabled
[  1966.121] (II) intel(0): DRI3: Disabled
[  1966.121] (==) intel(0): hotplug detection: "enabled"
[  1966.136] (--) RandR disabled
[  1966.146] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1966.146] (II) AIGLX: enabled GLX_ARB_create_context
[  1966.146] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  1966.146] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  1966.146] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1966.146] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1966.146] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  1966.146] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  1966.146] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  1966.146] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1966.146] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  1966.147] (II) AIGLX: Loaded and initialized i965
[  1966.147] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1966.147] (II) intel(0): Setting screen physical size to 508 x 285
[  1966.205] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1966.205] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1966.205] (**) Power Button: Applying InputClass "Keyboard Layout"
[  1966.205] (**) Power Button: Applying InputClass "Keyboard Terminate"
[  1966.205] (II) LoadModule: "libinput"
[  1966.205] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1966.206] (II) Module libinput: vendor="X.Org Foundation"
[  1966.206] 	compiled for 1.18.3, module version = 0.19.0
[  1966.206] 	Module class: X.Org XInput Driver
[  1966.206] 	ABI class: X.Org XInput driver, version 22.1
[  1966.206] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 11 paused 0
[  1966.206] (II) Using input driver 'libinput' for 'Power Button'
[  1966.206] (**) Power Button: always reports core events
[  1966.206] (**) Option "Device" "/dev/input/event3"
[  1966.206] (**) Option "_source" "server/udev"
[  1966.206] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  1966.206] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  1966.206] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[  1966.206] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1966.206] (**) Option "xkb_layout" "fr"
[  1966.206] (**) Option "xkb_variant" "oss"
[  1966.206] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.222] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  1966.222] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  1966.223] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[  1966.223] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[  1966.223] (**) Asus Wireless Radio Control: Applying InputClass "Keyboard Layout"
[  1966.223] (**) Asus Wireless Radio Control: Applying InputClass "Keyboard Terminate"
[  1966.223] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 14 paused 0
[  1966.223] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[  1966.223] (**) Asus Wireless Radio Control: always reports core events
[  1966.223] (**) Option "Device" "/dev/input/event4"
[  1966.223] (**) Option "_source" "server/udev"
[  1966.223] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  1966.223] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  1966.224] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8/event4"
[  1966.224] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[  1966.224] (**) Option "xkb_layout" "fr"
[  1966.224] (**) Option "xkb_variant" "oss"
[  1966.224] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.224] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  1966.224] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  1966.224] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[  1966.224] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1966.224] (**) Video Bus: Applying InputClass "Keyboard Layout"
[  1966.224] (**) Video Bus: Applying InputClass "Keyboard Terminate"
[  1966.225] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
[  1966.225] (II) Using input driver 'libinput' for 'Video Bus'
[  1966.225] (**) Video Bus: always reports core events
[  1966.225] (**) Option "Device" "/dev/input/event9"
[  1966.225] (**) Option "_source" "server/udev"
[  1966.225] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[  1966.225] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[  1966.225] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event9"
[  1966.225] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  1966.225] (**) Option "xkb_layout" "fr"
[  1966.225] (**) Option "xkb_variant" "oss"
[  1966.225] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.225] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[  1966.225] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[  1966.226] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[  1966.226] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1966.226] (**) Video Bus: Applying InputClass "Keyboard Layout"
[  1966.226] (**) Video Bus: Applying InputClass "Keyboard Terminate"
[  1966.226] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 16 paused 0
[  1966.226] (II) Using input driver 'libinput' for 'Video Bus'
[  1966.226] (**) Video Bus: always reports core events
[  1966.226] (**) Option "Device" "/dev/input/event8"
[  1966.226] (**) Option "_source" "server/udev"
[  1966.226] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[  1966.226] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[  1966.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:11/LNXVIDEO:00/input/input12/event8"
[  1966.226] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[  1966.226] (**) Option "xkb_layout" "fr"
[  1966.226] (**) Option "xkb_variant" "oss"
[  1966.226] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.227] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[  1966.227] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[  1966.227] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1966.227] (**) Lid Switch: Applying InputClass "Keyboard Layout"
[  1966.227] (II) No input driver specified, ignoring this device.
[  1966.227] (II) This device may have been added with another device file.
[  1966.227] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  1966.227] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1966.227] (**) Sleep Button: Applying InputClass "Keyboard Layout"
[  1966.227] (**) Sleep Button: Applying InputClass "Keyboard Terminate"
[  1966.227] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 17 paused 0
[  1966.227] (II) Using input driver 'libinput' for 'Sleep Button'
[  1966.227] (**) Sleep Button: always reports core events
[  1966.227] (**) Option "Device" "/dev/input/event2"
[  1966.227] (**) Option "_source" "server/udev"
[  1966.228] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  1966.228] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  1966.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[  1966.228] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[  1966.228] (**) Option "xkb_layout" "fr"
[  1966.228] (**) Option "xkb_variant" "oss"
[  1966.228] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.228] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  1966.228] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  1966.228] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event13)
[  1966.228] (**) USB2.0 UVC HD Webcam: Applying InputClass "libinput keyboard catchall"
[  1966.228] (**) USB2.0 UVC HD Webcam: Applying InputClass "Keyboard Layout"
[  1966.228] (**) USB2.0 UVC HD Webcam: Applying InputClass "Keyboard Terminate"
[  1966.229] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 18 paused 0
[  1966.229] (II) Using input driver 'libinput' for 'USB2.0 UVC HD Webcam'
[  1966.229] (**) USB2.0 UVC HD Webcam: always reports core events
[  1966.229] (**) Option "Device" "/dev/input/event13"
[  1966.229] (**) Option "_source" "server/udev"
[  1966.229] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event13 is tagged by udev as: Keyboard
[  1966.229] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event13 is a keyboard
[  1966.229] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20/event13"
[  1966.229] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 11)
[  1966.229] (**) Option "xkb_layout" "fr"
[  1966.229] (**) Option "xkb_variant" "oss"
[  1966.229] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.229] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event13 is tagged by udev as: Keyboard
[  1966.229] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event13 is a keyboard
[  1966.230] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[  1966.230] (**) HDA Intel PCH Mic: Applying InputClass "Keyboard Layout"
[  1966.230] (II) No input driver specified, ignoring this device.
[  1966.230] (II) This device may have been added with another device file.
[  1966.230] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[  1966.230] (**) HDA Intel PCH Headphone: Applying InputClass "Keyboard Layout"
[  1966.230] (II) No input driver specified, ignoring this device.
[  1966.230] (II) This device may have been added with another device file.
[  1966.230] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[  1966.230] (**) HDA Digital PCBeep: Applying InputClass "Keyboard Layout"
[  1966.230] (II) No input driver specified, ignoring this device.
[  1966.230] (II) This device may have been added with another device file.
[  1966.230] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[  1966.230] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1966.230] (**) Asus WMI hotkeys: Applying InputClass "Keyboard Layout"
[  1966.230] (**) Asus WMI hotkeys: Applying InputClass "Keyboard Terminate"
[  1966.230] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[  1966.230] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[  1966.230] (**) Asus WMI hotkeys: always reports core events
[  1966.230] (**) Option "Device" "/dev/input/event11"
[  1966.230] (**) Option "_source" "server/udev"
[  1966.231] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard
[  1966.231] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is a keyboard
[  1966.231] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input19/event11"
[  1966.231] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[  1966.231] (**) Option "xkb_layout" "fr"
[  1966.231] (**) Option "xkb_variant" "oss"
[  1966.231] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.231] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard
[  1966.231] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is a keyboard
[  1966.231] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1966.231] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1966.231] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Layout"
[  1966.231] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Terminate"
[  1966.231] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[  1966.232] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1966.232] (**) AT Translated Set 2 keyboard: always reports core events
[  1966.232] (**) Option "Device" "/dev/input/event0"
[  1966.232] (**) Option "_source" "server/udev"
[  1966.232] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  1966.232] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  1966.232] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1966.232] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[  1966.232] (**) Option "xkb_layout" "fr"
[  1966.232] (**) Option "xkb_variant" "oss"
[  1966.232] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1966.232] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  1966.232] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  1966.232] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/event12)
[  1966.232] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "libinput touchpad catchall"
[  1966.232] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "libinput touchscreen catchall"
[  1966.232] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "Keyboard Layout"
[  1966.233] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 21 paused 0
[  1966.233] (II) Using input driver 'libinput' for 'FocalTechPS/2 FocalTech FocalTech Touchpad'
[  1966.233] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: always reports core events
[  1966.233] (**) Option "Device" "/dev/input/event12"
[  1966.233] (**) Option "_source" "server/udev"
[  1966.233] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad Touchscreen
[  1966.233] (II) FocalTechPS/2 FocalTech FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[  1966.233] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event12 is a touchpad
[  1966.233] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input18/event12"
[  1966.233] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech FocalTech Touchpad" (type: TOUCHPAD, id 14)
[  1966.233] (**) Option "AccelerationScheme" "none"
[  1966.233] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) selected scheme none/0
[  1966.233] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration factor: 2.000
[  1966.233] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration threshold: 4
[  1966.233] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad Touchscreen
[  1966.233] (II) FocalTechPS/2 FocalTech FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[  1966.233] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event12 is a touchpad
[  1966.233] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/mouse0)
[  1966.233] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "Keyboard Layout"
[  1966.233] (II) No input driver specified, ignoring this device.
[  1966.234] (II) This device may have been added with another device file.
[  1966.234] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[  1966.234] (**) PC Speaker: Applying InputClass "Keyboard Layout"
[  1966.234] (II) No input driver specified, ignoring this device.
[  1966.234] (II) This device may have been added with another device file.
[  1972.282] (**) Option "fd" "11"
[  1972.282] (**) Option "fd" "14"
[  1972.282] (**) Option "fd" "15"
[  1972.282] (**) Option "fd" "16"
[  1972.283] (**) Option "fd" "17"
[  1972.283] (**) Option "fd" "18"
[  1972.283] (**) Option "fd" "19"
[  1972.283] (**) Option "fd" "20"
[  1972.283] (**) Option "fd" "21"
[  1972.283] (II) UnloadModule: "libinput"
[  1972.283] (II) systemd-logind: releasing fd for 13:76
[  1972.316] (II) UnloadModule: "libinput"
[  1972.316] (II) systemd-logind: releasing fd for 13:64
[  1972.343] (II) UnloadModule: "libinput"
[  1972.343] (II) systemd-logind: releasing fd for 13:75
[  1972.356] (II) UnloadModule: "libinput"
[  1972.356] (II) systemd-logind: releasing fd for 13:77
[  1972.383] (II) UnloadModule: "libinput"
[  1972.383] (II) systemd-logind: releasing fd for 13:66
[  1972.396] (II) UnloadModule: "libinput"
[  1972.396] (II) systemd-logind: releasing fd for 13:72
[  1972.409] (II) UnloadModule: "libinput"
[  1972.409] (II) systemd-logind: releasing fd for 13:73
[  1972.423] (II) UnloadModule: "libinput"
[  1972.423] (II) systemd-logind: releasing fd for 13:68
[  1972.436] (II) UnloadModule: "libinput"
[  1972.436] (II) systemd-logind: releasing fd for 13:67
[  1972.457] (II) Server terminated successfully (0). Closing log file.

[benjarobin]

Aucun souci ici. Personnellement je ne me fierai pas à la sortie de conky. Pour la charge CPU as tu regardé avec htop ?
Pour la fréquence CPU as tu regardé avec i7z ?

[AchilleFraisse]

La commande top me donne des chages de cpu élevé.
Et voici le résultat de la commande i7z :

Code : Tout sélectionner

i7z DEBUG: i7z version: svn-r93-(27-MAY-2013)
i7z DEBUG: Found Intel Processor
i7z DEBUG:    Stepping 1
i7z DEBUG:    Model 5
i7z DEBUG:    Family 6
i7z DEBUG:    Processor Type 0
i7z DEBUG:    Extended Model 4
i7z DEBUG: msr = Model Specific Register
i7z DEBUG: Unknown processor, not exactly based on Nehalem, Sandy bridge or Ivy Bridge
i7z DEBUG: msr device files DO NOT exist, trying out a makedev script
i7z DEBUG: You DO NOT have root privileges, mknod to create device entries won't work out
i7z DEBUG: A solution is to run this program as root
Quitting i7z

[benjarobin]

Ce serait intéressant d'avoir la sortie de top... Par exemple avec

Code : Tout sélectionner

top -n 6 -o "+%CPU"

Après stabilisation (6 secondes) la commande retourne
Et c'est mieux quand on lit la sortie de i7z (il est demandé de le lancer en root !)

[AchilleFraisse]

Voilà les captutes d'écrans :
http://www.casimages.com/i/160518102724355700.png.html

http://www.casimages.com/i/160518102854294687.png.html

[benjarobin]

C'est ton conky qui pose problème. Supprime le et dit nous si cela améliore les choses