[xorg] écran noir au lancement de X

Xorg, Compiz, KDE / Gnome / Xfce / Fluxbox / e17 / fvwm ... GDM/KDM/XDM...
Songohan
newbie
Messages : 7
Inscription : jeu. 12 nov. 2009, 13:44

[xorg] écran noir au lancement de X

Message par Songohan »

Bonjour, j'ai installé xorg, le driver intel et kde. J'ai un écran noir au lancement de X et le PC ne répond plus.
J'ai modifié le inittab pour démarrer kdm en init 5, mais ça n'a rien changé (toujours écran noir et PC qui ne répond plus).

J'ai généré un xorg.conf avec la commande "Xorg -configure" et j'ai toujours le même problème.
Dans le fichier de log, je vois le contenu du xorg.conf.new généré précédemment.

Je posterai le fichier de configuration ce soir. Je n'ai pas le PC sous la main. Est-ce que le problème est connu ? Que faut-il faire ?

Merci d'avance :) .
[EDIT:MODO]Dell Inspiron 510m (intel 855GM), la partie en plus qui rentrait plus dans le titre[/EDIT]
Dernière modification par tuxce le jeu. 12 nov. 2009, 14:48, modifié 1 fois.
Raison : [thème] sujet (état)
Avatar de l’utilisateur
Abazigal
Chu Ko Nu
Messages : 313
Inscription : sam. 26 avr. 2008, 14:45
Localisation : Seine et Marne

Re: Dell Inspiron 510m (intel 855GM)écran noir au lancement de X

Message par Abazigal »

Commence par relire le wiki sur l'installation de xorg, surtout la partie "detection automatique".

Ton PC n'est pas réelement bloqué, c'est juste que ni la souris ni le clavier (ni le moniteur, surement) ne sont détectés. Trois trucs que détecte/configure HAL ...
As-tu bien installé/lancé le démon HAL ? Installé xf86-input-evdev ?

Dans ton xorg.conf, tu n'as besoin que de préciser le driver à utiliser (et encore, avec certains drivers libres, tu n'as même pas besoin de xorg.conf"). Certaines options "désactive" l'auto-detection par HAL (et ça, ca mène à des problèmes comme le tien).

Essaye avec un truc minimaliste genre

Code : Tout sélectionner

Section "Device"
    Identifier     "Device0"
    Driver         "intel"
EndSection
Et rien d'autre dans le xorg.conf ...
Si les cons savaient voler, il ferait nuit tout le temps ...
Songohan
newbie
Messages : 7
Inscription : jeu. 12 nov. 2009, 13:44

Re: [xorg] écran noir au lancement de X

Message par Songohan »

J'ai bien installé tous les paquets que tu mentionnes. Hal est bien installé et lancé au démarrage.

Sur IRC, on m'a dit d'essayer de configurer hal. Tu penses aussi que ça viendrait de là ?

J'essaierai ton xorg.conf minimaliste ce soir.
Avatar de l’utilisateur
Abazigal
Chu Ko Nu
Messages : 313
Inscription : sam. 26 avr. 2008, 14:45
Localisation : Seine et Marne

Re: [xorg] écran noir au lancement de X

Message par Abazigal »

Il n'y a rien à configurer pour HAL (à part le clavier azerty, m'enfin bon ...).
C'est juste que dans ton cas, xorg ne s'appuie pas sur HAL (surement à cause d'un element du surplus dans ton xorg.conf) alors qu'il le devrait. On peut voir si HAL est utilisé où non, en fesant un

Code : Tout sélectionner

grep -i hal /var/log/Xorg.0.log
et en regardant si on a la ligne "(II) The server relies on HAL to provide the list of input devices.". Je suis persuadé que toi tu ne l'a pas, actuelement.

Enfin bref, on sera fixé quand t'auras essayé le nouveau xorg.conf.
Si les cons savaient voler, il ferait nuit tout le temps ...
Songohan
newbie
Messages : 7
Inscription : jeu. 12 nov. 2009, 13:44

Re: [xorg] écran noir au lancement de X

Message par Songohan »

Je comprends ce que tu veux dire. Mais même quand je ne fais pas de xorg.conf, j'ai ce fameux écran noir.

Sur le wiki, il y a une page expliquant comment configurer hal (http://wiki.archlinux.org/index.php/HAL). Sur les autres distribs, je n'ai jamais eu à configurer hal.
Avatar de l’utilisateur
Abazigal
Chu Ko Nu
Messages : 313
Inscription : sam. 26 avr. 2008, 14:45
Localisation : Seine et Marne

Re: [xorg] écran noir au lancement de X

Message par Abazigal »

Oui, mais comme tu peux le voir, il n'y a rien sur clavier/souris/ecran ...
Et pour cause, il n'y a rien a faire de ce coté là.

Etrange que tu ai l'ecran noir sans xorg.conf, j'aurais plutot pencher vers un retour sur le TTY et xorg qui dit qu'il ne trouve pas de driver ... Essaie quand même avec le ptit xorg.conf, on sait jamais (après tout, c'est celui qui est donné sur le wiki sur les drivers intel)
Si les cons savaient voler, il ferait nuit tout le temps ...
Avatar de l’utilisateur
tuxce
Maître du Kyudo
Messages : 6677
Inscription : mer. 12 sept. 2007, 16:03

Re: [xorg] écran noir au lancement de X

Message par tuxce »

t'as vérifié si hal est lancé avant de lancer X?
t'as essayé la commande du wiki qui kill le serveur au bout de 15 sec ? si oui, tu peux récupérer les logs par la suite.
t'as essayé un ~/.xinitrc vide (pas absent, vide!) et lancer "startx" ? (remarque ce dernier n'est pas dans le wiki, mais bon il y est sur tellement de topic...)
Songohan
newbie
Messages : 7
Inscription : jeu. 12 nov. 2009, 13:44

Re: [xorg] écran noir au lancement de X

Message par Songohan »

t'as vérifié si hal est lancé avant de lancer X?
Non, je n'ai pas vérifié. Je fais comment ? Je regarde le dmesg ?

t'as essayé la commande du wiki qui kill le serveur au bout de 15 sec ? si oui, tu peux récupérer les logs par la suite.
Non, peux-tu me rappeler cette commande s'il te plaît ?
t'as essayé un ~/.xinitrc vide (pas absent, vide!) et lancer "startx" ? (remarque ce dernier n'est pas dans le wiki, mais bon il y est sur tellement de topic...)
Non, mais j'essaierai.
Avatar de l’utilisateur
tuxce
Maître du Kyudo
Messages : 6677
Inscription : mer. 12 sept. 2007, 16:03

Re: [xorg] écran noir au lancement de X

Message par tuxce »

tu peux utiliser
, ça permet de citer.
pour vérifier si hal tourne, en plus d'observer si ça te met un FAIL ou non, tu peux lancer:

Code : Tout sélectionner

ps -ef | grep hald
par exemple.
Songohan a écrit :Non, peux-tu me rappeler cette commande s'il te plaît ?
sur le wiki.
Songohan
newbie
Messages : 7
Inscription : jeu. 12 nov. 2009, 13:44

Re: [xorg] écran noir au lancement de X

Message par Songohan »

Voici les résultats que j'obtiens sans fichier de configuration :

Xorg.0.log :

Code : Tout sélectionner

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686 
Current Operating System: Linux songohan-laptop 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/70d01a55-eeda-4526-9e01-36ddd2b59199 ro
Build Date: 08 November 2009  04:12:47PM
 
Current version of pixman: 0.16.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 11 22:13:35 2009
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:3582:1028:0164 Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfaf80000/524288, I/O @ 0x0000c000/8
(--) PCI: (0:0:2:1) 8086:3582:1028:0164 Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfaf00000/524288
List of video drivers:
	intel
	fbdev
	vesa
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.7.0.901, module version = 0.4.1
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.7.0.901, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) Primary Device is: PCI 00@00:02:0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Monitor1"
(**) |   |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0


Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Xorg has configured a multihead system, please check your config.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

dmesg :

Code : Tout sélectionner

Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005feaa000 (usable)
 BIOS-e820: 000000005feaa000 - 0000000060000000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x5feaa max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 040000000 mask FE0000000 write-back
  2 base 05FF00000 mask FFFF00000 uncachable
  3 base 0FEDA0000 mask FFFFE0000 write-through
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 000000000009f000 (usable)
 modified: 000000000009f000 - 00000000000a0000 (reserved)
 modified: 0000000000100000 - 000000005feaa000 (usable)
 modified: 000000005feaa000 - 0000000060000000 (reserved)
 modified: 00000000fec10000 - 00000000fec20000 (reserved)
 modified: 00000000feda0000 - 00000000fee00000 (reserved)
 modified: 00000000ffb00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 5fdda000 - 5fe993ae
Allocated new RAMDISK: 00100000 - 001bf3ae
Move RAMDISK from 000000005fdda000 - 000000005fe993ad to 00100000 - 001bf3ad
ACPI: RSDP 000fdf00 00014 (v00 DELL  )
ACPI: RSDT 5fef0000 0002C (v01 DELL    CPi R   27D50810 ASL  00000061)
ACPI: FACP 5fef0400 00074 (v01 DELL    CPi R   27D50810 ASL  00000061)
ACPI: DSDT 5fef0c00 032B5 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 5feff800 00040
ACPI: BOOT 5fef07c0 00028 (v01 DELL    CPi R   27D50810 ASL  00000061)
646MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0001000000 - 000156da44]    TEXT DATA BSS ==> [0001000000 - 000156da44]
  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #5 [000156e000 - 000157415c]              BRK ==> [000156e000 - 000157415c]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000100000 - 00001bf3ae]      NEW RAMDISK ==> [0000100000 - 00001bf3ae]
  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0005feaa
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x0000009f
    0: 0x00000100 -> 0x0005feaa
On node 0 totalpages: 392773
free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3963 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 1294 pages used for memmap
  HighMem zone: 164254 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 60000000:9ec10000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages at c217c000, static data 34332 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389703
Kernel command line: root=/dev/disk/by-uuid/70d01a55-eeda-4526-9e01-36ddd2b59199 ro
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0005feaa)
Memory: 1550700k/1571496k available (3111k kernel code, 19548k reserved, 1120k data, 416k init, 662192k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc1422000 - 0xc148a000   ( 416 kB)
      .data : 0xc1309ddd - 0xc1421ea8   (1120 kB)
      .text : 0xc1000000 - 0xc1309ddd   (3111 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:512
Fast TSC calibration using PIT
Detected 1598.547 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 3198.30 BogoMIPS (lpj=5328490)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
mce: CPU supports 5 MCE banks
------------[ cut here ]------------
WARNING: at arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x4b/0x60()
Hardware name: Inspiron 510m                   
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.31-ARCH #1
Call Trace:
 [<c10464da>] ? warn_slowpath_common+0x7a/0xc0
 [<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
 [<c1046540>] ? warn_slowpath_null+0x20/0x40
 [<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
 [<c1016601>] ? intel_init_thermal+0xd1/0x1d0
 [<c10149c3>] ? mce_init+0xc3/0xf0
 [<c10ed693>] ? __kmalloc+0x93/0x210
 [<c1015bc5>] ? mce_intel_feature_init+0x15/0x70
 [<c13014ed>] ? mcheck_init+0x261/0x2b5
 [<c12ff55a>] ? identify_cpu+0x377/0x386
 [<c10ecabf>] ? kmem_cache_alloc+0x6f/0x170
 [<c1429dc9>] ? identify_boot_cpu+0xa/0x1e
 [<c1429f90>] ? check_bugs+0x14/0x108
 [<c109add0>] ? __delayacct_tsk_init+0x20/0x50
 [<c1422a31>] ? start_kernel+0x332/0x353
 [<c14224f0>] ? unknown_bootoption+0x0/0x1bd
---[ end trace a7919e7f17c0a725 ]---
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: 
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
p6 PMU driver.
... version:                 0
... bit width:               32
... generic counters:        2
... value mask:              00000000ffffffff
... max period:              000000007fffffff
... fixed-purpose counters:  0
... counter mask:            0000000000000003
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3198.30 BogoMIPS).
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xfaf80000-0xfaffffff]
pci 0000:00:02.0: reg 18 io port: [0xc000-0xc007]
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:00:02.1: reg 14 32bit mmio: [0xfaf00000-0xfaf7ffff]
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
pci 0000:00:1d.1: reg 20 io port: [0xbf40-0xbf5f]
pci 0000:00:1d.2: reg 20 io port: [0xbf20-0xbf3f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfaeffc00-0xfaefffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xfaeff800-0xfaeff9ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfaeff400-0xfaeff4ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:01:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:01:01.0: supports D1 D2
pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:01.0: PME# disabled
pci 0000:01:01.1: reg 10 32bit mmio: [0xfcfff800-0xfcffffff]
pci 0000:01:01.1: reg 14 32bit mmio: [0xfcff8000-0xfcffbfff]
pci 0000:01:01.1: supports D1 D2
pci 0000:01:01.1: PME# supported from D0 D1 D2 D3hot
pci 0000:01:01.1: PME# disabled
pci 0000:01:03.0: reg 10 32bit mmio: [0xfcffc000-0xfcffdfff]
pci 0000:01:08.0: reg 10 32bit mmio: [0xfcffe000-0xfcffefff]
pci 0000:01:08.0: reg 14 io port: [0xecc0-0xecff]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
pnp 00:0e: io resource (0xe3b0-0xe3bb) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp 00:0e: io resource (0xe3c0-0xe3df) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp 00:0e: io resource (0xe7b0-0xe7bb) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp 00:0e: io resource (0xe7c0-0xe7df) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp 00:0e: io resource (0xebb0-0xebbb) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp 00:0e: io resource (0xebc0-0xebdf) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp 00:0e: io resource (0xefb0-0xefbb) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp 00:0e: io resource (0xefc0-0xefdf) overlaps 0000:00:1e.0 BAR 13 (0xe000-0xefff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x5feeffff could not be reserved
system 00:00: iomem range 0x5fef0000-0x5fefffff has been reserved
system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved
system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x880-0x8bf has been reserved
system 00:03: ioport range 0x8c0-0x8df has been reserved
system 00:03: ioport range 0x8e0-0x8ff has been reserved
system 00:08: ioport range 0x900-0x97f has been reserved
system 00:0e: ioport range 0x7b0-0x7bb has been reserved
system 00:0e: ioport range 0x7c0-0x7df has been reserved
system 00:0e: ioport range 0xbb0-0xbbb has been reserved
system 00:0e: ioport range 0xbc0-0xbdf has been reserved
system 00:0e: ioport range 0xfb0-0xfbb has been reserved
system 00:0e: ioport range 0xfc0-0xfdf has been reserved
system 00:0e: ioport range 0x13b0-0x13bb has been reserved
system 00:0e: ioport range 0x13c0-0x13df has been reserved
system 00:0e: ioport range 0x17b0-0x17bb has been reserved
system 00:0e: ioport range 0x17c0-0x17df has been reserved
system 00:0e: ioport range 0x1bb0-0x1bbb has been reserved
system 00:0e: ioport range 0x1bc0-0x1bdf has been reserved
system 00:0e: ioport range 0x1fb0-0x1fbb has been reserved
system 00:0e: ioport range 0x1fc0-0x1fdf has been reserved
system 00:0e: ioport range 0x23b0-0x23bb has been reserved
system 00:0e: ioport range 0x23c0-0x23df has been reserved
system 00:0e: ioport range 0x27b0-0x27bb has been reserved
system 00:0e: ioport range 0x27c0-0x27df has been reserved
system 00:0e: ioport range 0x2bb0-0x2bbb has been reserved
system 00:0e: ioport range 0x2bc0-0x2bdf has been reserved
system 00:0e: ioport range 0x2fb0-0x2fbb has been reserved
system 00:0e: ioport range 0x2fc0-0x2fdf has been reserved
system 00:0e: ioport range 0x33b0-0x33bb has been reserved
system 00:0e: ioport range 0x33c0-0x33df has been reserved
system 00:0e: ioport range 0x37b0-0x37bb has been reserved
system 00:0e: ioport range 0x37c0-0x37df has been reserved
system 00:0e: ioport range 0x3bb0-0x3bbb has been reserved
system 00:0e: ioport range 0x3bc0-0x3bdf has been reserved
system 00:0e: ioport range 0x3fb0-0x3fbb has been reserved
system 00:0e: ioport range 0x3fc0-0x3fdf has been reserved
system 00:0e: ioport range 0x43b0-0x43bb has been reserved
system 00:0e: ioport range 0x43c0-0x43df has been reserved
system 00:0e: ioport range 0x47b0-0x47bb has been reserved
system 00:0e: ioport range 0x47c0-0x47df has been reserved
system 00:0e: ioport range 0x4bb0-0x4bbb has been reserved
system 00:0e: ioport range 0x4bc0-0x4bdf has been reserved
system 00:0e: ioport range 0x4fb0-0x4fbb has been reserved
system 00:0e: ioport range 0x4fc0-0x4fdf has been reserved
system 00:0e: ioport range 0x53b0-0x53bb has been reserved
system 00:0e: ioport range 0x53c0-0x53df has been reserved
system 00:0e: ioport range 0x57b0-0x57bb has been reserved
system 00:0e: ioport range 0x57c0-0x57df has been reserved
system 00:0e: ioport range 0x5bb0-0x5bbb has been reserved
system 00:0e: ioport range 0x5bc0-0x5bdf has been reserved
system 00:0e: ioport range 0x5fb0-0x5fbb has been reserved
system 00:0e: ioport range 0x5fc0-0x5fdf has been reserved
system 00:0e: ioport range 0x63b0-0x63bb has been reserved
system 00:0e: ioport range 0x63c0-0x63df has been reserved
system 00:0e: ioport range 0x67b0-0x67bb has been reserved
system 00:0e: ioport range 0x67c0-0x67df has been reserved
system 00:0e: ioport range 0x6bb0-0x6bbb has been reserved
system 00:0e: ioport range 0x6bc0-0x6bdf has been reserved
system 00:0e: ioport range 0x6fb0-0x6fbb has been reserved
system 00:0e: ioport range 0x6fc0-0x6fdf has been reserved
system 00:0e: ioport range 0x73b0-0x73bb has been reserved
system 00:0e: ioport range 0x73c0-0x73df has been reserved
system 00:0e: ioport range 0x77b0-0x77bb has been reserved
system 00:0e: ioport range 0x77c0-0x77df has been reserved
system 00:0e: ioport range 0x7bb0-0x7bbb has been reserved
system 00:0e: ioport range 0x7bc0-0x7bdf has been reserved
system 00:0e: ioport range 0x7fb0-0x7fbb has been reserved
system 00:0e: ioport range 0x7fc0-0x7fdf has been reserved
system 00:0e: ioport range 0x83b0-0x83bb has been reserved
system 00:0e: ioport range 0x83c0-0x83df has been reserved
system 00:0e: ioport range 0x87b0-0x87bb has been reserved
system 00:0e: ioport range 0x87c0-0x87df has been reserved
system 00:0e: ioport range 0x8bb0-0x8bbb has been reserved
system 00:0e: ioport range 0x8bc0-0x8bdf has been reserved
system 00:0e: ioport range 0x8fb0-0x8fbb has been reserved
system 00:0e: ioport range 0x8fc0-0x8fdf has been reserved
system 00:0e: ioport range 0x93b0-0x93bb has been reserved
system 00:0e: ioport range 0x93c0-0x93df has been reserved
system 00:0e: ioport range 0x97b0-0x97bb has been reserved
system 00:0e: ioport range 0x97c0-0x97df has been reserved
system 00:0e: ioport range 0x9bb0-0x9bbb has been reserved
system 00:0e: ioport range 0x9bc0-0x9bdf has been reserved
system 00:0e: ioport range 0x9fb0-0x9fbb has been reserved
system 00:0e: ioport range 0x9fc0-0x9fdf has been reserved
system 00:0e: ioport range 0xa3b0-0xa3bb has been reserved
system 00:0e: ioport range 0xa3c0-0xa3df has been reserved
system 00:0e: ioport range 0xa7b0-0xa7bb has been reserved
system 00:0e: ioport range 0xa7c0-0xa7df has been reserved
system 00:0e: ioport range 0xabb0-0xabbb has been reserved
system 00:0e: ioport range 0xabc0-0xabdf has been reserved
system 00:0e: ioport range 0xafb0-0xafbb has been reserved
system 00:0e: ioport range 0xafc0-0xafdf has been reserved
system 00:0e: ioport range 0xb3b0-0xb3bb has been reserved
system 00:0e: ioport range 0xb3c0-0xb3df has been reserved
system 00:0e: ioport range 0xb7b0-0xb7bb has been reserved
system 00:0e: ioport range 0xb7c0-0xb7df has been reserved
system 00:0e: ioport range 0xbbb0-0xbbbb has been reserved
system 00:0e: ioport range 0xbbc0-0xbbdf has been reserved
system 00:0e: ioport range 0xbfb0-0xbfbb has been reserved
system 00:0e: ioport range 0xbfc0-0xbfdf has been reserved
system 00:0e: ioport range 0xc3b0-0xc3bb has been reserved
system 00:0e: ioport range 0xc3c0-0xc3df has been reserved
system 00:0e: ioport range 0xc7b0-0xc7bb has been reserved
system 00:0e: ioport range 0xc7c0-0xc7df has been reserved
system 00:0e: ioport range 0xcbb0-0xcbbb has been reserved
system 00:0e: ioport range 0xcbc0-0xcbdf has been reserved
system 00:0e: ioport range 0xcfb0-0xcfbb has been reserved
system 00:0e: ioport range 0xcfc0-0xcfdf has been reserved
system 00:0e: ioport range 0xd3b0-0xd3bb has been reserved
system 00:0e: ioport range 0xd3c0-0xd3df has been reserved
system 00:0e: ioport range 0xd7b0-0xd7bb has been reserved
system 00:0e: ioport range 0xd7c0-0xd7df has been reserved
system 00:0e: ioport range 0xdbb0-0xdbbb has been reserved
system 00:0e: ioport range 0xdbc0-0xdbdf has been reserved
system 00:0e: ioport range 0xdfb0-0xdfbb has been reserved
system 00:0e: ioport range 0xdfc0-0xdfdf has been reserved
system 00:0e: ioport range 0xf3b0-0xf3bb has been reserved
system 00:0e: ioport range 0xf3c0-0xf3df has been reserved
system 00:0e: ioport range 0xf7b0-0xf7bb has been reserved
system 00:0e: ioport range 0xf7c0-0xf7df has been reserved
system 00:0e: ioport range 0xfbb0-0xfbbb has been reserved
system 00:0e: ioport range 0xfbc0-0xfbdf has been reserved
system 00:0e: ioport range 0xffb0-0xffbb has been reserved
system 00:0e: ioport range 0xffc0-0xffdf has been reserved
pci 0000:01:01.0: CardBus bridge, secondary bus 0000:02
pci 0000:01:01.0:   IO window: 0x00e000-0x00e0ff
pci 0000:01:01.0:   IO window: 0x00e400-0x00e4ff
pci 0000:01:01.0:   PREFETCH window: 0x60000000-0x63ffffff
pci 0000:01:01.0:   MEM window: 0x68000000-0x6bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0xe000-0xefff
pci 0000:00:1e.0:   MEM window: 0xfc000000-0xfdffffff
pci 0000:00:1e.0:   PREFETCH window: 0x60000000-0x63ffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:01:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:01:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
pci_bus 0000:01: resource 2 pref mem [0x60000000-0x63ffffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io:  [0xe000-0xe0ff]
pci_bus 0000:02: resource 1 io:  [0xe400-0xe4ff]
pci_bus 0000:02: resource 2 pref mem [0x60000000-0x63ffffff]
pci_bus 0000:02: resource 3 mem: [0x68000000-0x6bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 764k freed
Simple Boot Flag at 0x79 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1258056166.229:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1738
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 416k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
pata_acpi 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
ata1.00: 312581808 sectors, multi 8: LBA48 
ata2.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  LQ10 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S082H  SB00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
Clocksource tsc unstable (delta = -1380590728 ns)
 sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda7): INFO: recovery required on readonly filesystem
EXT4-fs (sda7): write access will be enabled during recovery
EXT4-fs (sda7): barriers enabled
kjournald2 starting: pid 499, dev sda7:8, commit interval 5 seconds
EXT4-fs (sda7): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda7): recovery complete
EXT4-fs (sda7): mounted filesystem with ordered data mode
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
udev: starting version 146
intel_rng: FWH not detected
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
Linux agpgart interface v0.103
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: AC Adapter [AC] (on-line)
input: PC Speaker as /devices/platform/pcspkr/input/input5
iTCO_vendor_support: vendor-support=0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (43 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfaeffc00
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/input/input6
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:24/input/input7
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 892K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
ACPI: Battery Slot [BAT0] (battery present)
ppdev: user-space parallel port driver
ACPI: Battery Slot [BAT1] (battery absent)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 23
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xfcffe000, irq 11, MAC addr 00:0f:1f:c9:96:7a
yenta_cardbus 0000:01:01.0: CardBus bridge found [1028:0164]
yenta_cardbus 0000:01:01.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:01:01.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:01:01.0: TI: mfunc 0x012c1222, devctl 0x64
yenta_cardbus 0000:01:01.0: ISA IRQ mask 0x0478, PCI irq 11
yenta_cardbus 0000:01:01.0: Socket status: 30000086
pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xefff: clean.
yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfdffffff
yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
ohci1394 0000:01:01.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[fcfff800-fcffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
b43-pci-bridge 0000:01:03.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
ssb: Sonics Silicon Backplane found on PCI device 0000:01:03.0
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x280-0x287
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
b43-phy0: Broadcom 4306 WLAN found (core revision 5)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
intel8x0_measure_ac97_clock: measured 52534 usecs (2532 samples)
intel8x0: clocking to 48000
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[4a4fc000236ba830]
EXT4-fs (sda7): internal journal on sda7:8
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1060248k swap on /dev/sda5.  Priority:-1 extents:1 across:1060248k 
sr 1:0:0:0: [sr0] Unhandled sense code
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x4 [current] 
sr 1:0:0:0: [sr0] ASC=0x3e ASCQ=0x2
end_request: I/O error, dev sr0, sector 703536
Buffer I/O error on device sr0, logical block 175884
sr 1:0:0:0: [sr0] Unhandled sense code
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x4 [current] 
sr 1:0:0:0: [sr0] ASC=0x3e ASCQ=0x2
end_request: I/O error, dev sr0, sector 703536
Buffer I/O error on device sr0, logical block 175884
sr 1:0:0:0: [sr0] Unhandled sense code
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x4 [current] 
sr 1:0:0:0: [sr0] ASC=0x3e ASCQ=0x2
end_request: I/O error, dev sr0, sector 703536
Buffer I/O error on device sr0, logical block 175884
e100: eth0 NIC Link is Up 100 Mbps Full Duplex
sr 1:0:0:0: [sr0] Unhandled sense code
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x4 [current] 
sr 1:0:0:0: [sr0] ASC=0x3e ASCQ=0x2
end_request: I/O error, dev sr0, sector 703536
Buffer I/O error on device sr0, logical block 175884
sr 1:0:0:0: [sr0] Unhandled sense code
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x4 [current] 
sr 1:0:0:0: [sr0] ASC=0x3e ASCQ=0x2
end_request: I/O error, dev sr0, sector 703536
Buffer I/O error on device sr0, logical block 175884
sr 1:0:0:0: [sr0] Unhandled sense code
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x4 [current] 
sr 1:0:0:0: [sr0] ASC=0x3e ASCQ=0x2
end_request: I/O error, dev sr0, sector 703536
Buffer I/O error on device sr0, logical block 175884
xorg.conf.new autogénéré

Code : Tout sélectionner

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
	Load  "dri"
	Load  "record"
	Load  "dri2"
	Load  "dbe"
	Load  "glx"
	Load  "extmod"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
	Identifier  "Card0"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "82852/855GM Integrated Graphics Device"
	BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
	Identifier  "Card1"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "82852/855GM Integrated Graphics Device"
	BusID       "PCI:0:2:1"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Avec le xorg.conf minimal, xorg refuse de se lancer car il n'arrive pas à parser le fichier.
ps -ef | grep hald

Code : Tout sélectionner

hal       1360     1  0 23:34 ?        00:00:00 /usr/sbin/hald
root      1426  1360  0 23:34 ?        00:00:00 hald-runner
root      1454  1426  0 23:34 ?        00:00:00 hald-addon-input: Listening on /dev/input/event7 /dev/input/event6 /dev/input/event4 /dev/input/event3 /dev/input/event5 /dev/input/event1
root      1457  1426  0 23:34 ?        00:00:00 /usr/lib/hal/hald-addon-rfkill-killswitch
root      1466  1426  0 23:34 ?        00:00:00 /usr/lib/hal/hald-addon-generic-backlight
root      1470  1426  0 23:34 ?        00:00:00 hald-addon-storage: polling /dev/sdb (every 16 sec)
root      1479  1426  0 23:34 ?        00:00:00 hald-addon-storage: polling /dev/sr0 (every 16 sec)
hal       1482  1426  0 23:34 ?        00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
root      1589  1583  0 23:35 tty1     00:00:00 grep hald
Songohan
newbie
Messages : 7
Inscription : jeu. 12 nov. 2009, 13:44

Re: [xorg] écran noir au lancement de X

Message par Songohan »

J'ai vérifier hal était lancé en premier dans la liste des démons du rc.conf.
Je l'ai mis après le syslog-ng, remodifié le inittab (pour démarrer en init 5 et kdm) et j'ai toujours cet écran noir.

Qu'est-ce que je peux faire d'autre ?

J'essaierai de passer sur le channel IRC :).

@+
Songohan
newbie
Messages : 7
Inscription : jeu. 12 nov. 2009, 13:44

Re: [xorg] écran noir au lancement de X

Message par Songohan »

Remplacer intel par vesa n'a pas été très fructueux.

Code : Tout sélectionner

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686 
Current Operating System: Linux songohan-laptop 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/70d01a55-eeda-4526-9e01-36ddd2b59199 ro
Build Date: 08 November 2009  04:12:47PM
 
Current version of pixman: 0.16.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 13 19:19:53 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) VESA(0): No valid modes
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

maroxe
yeomen
Messages : 245
Inscription : jeu. 05 févr. 2009, 22:45

Re: [xorg] écran noir au lancement de X

Message par maroxe »

Meme probleme, j'ai une carte Ati.
Hal est bien lancé, mais mon PC ne répond plus après avoir lancé startx.
La commande qui permet de killer X en 15 secondes ne marche pas non plus(toujours ecran noir meme apres 1 à 2 min), obligé de redemarrer donc.
je n'utilise pas de xorg.conf
Image
BelOuille
Hankyu
Messages : 26
Inscription : ven. 06 mars 2009, 22:17

Re: [xorg] écran noir au lancement de X

Message par BelOuille »

Bonjour,

Je ne sais pas si je dois faire un nouveau post mais j'ai bizarrement le même problème depuis ce matin.
C'est étrange car je n'ai pourtant pas le souvenir d'avoir fait de mises à jour, ni aucune manipulation spéciale.

J'utilise le driver libre d'ati et le noyau 2.6.31.

J'ai essayé de désactiver le lancement automatique de gdm puis lancer un startx. Le serveur X se plante, voici le Xorg0.log :

Code : Tout sélectionner

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686 
Current Operating System: Linux kakou 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/28c9c0af-95ad-469b-bf54-87eaa629d5b9 ro
Build Date: 12 December 2009  12:59:40PM
 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 11:00:40 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:1:5:0) 1002:5975:1025:009f ATI Technologies Inc RS482 [Radeon Xpress 200M] rev 0, Mem @ 0xc8000000/134217728, 0xc0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 6.12.4
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
	ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:05:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5975 (PCIE)" (ChipID = 0x5975)
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] radeon kernel module version is 2.0.0 but version 1.17.0 or newer is needed.
[dri] Disabling DRI.
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 20000, sclk: 300.000000, mclk: 200.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=20000
(II) RADEON(0): Panel ID string: QDS                     
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 16, HSyncWidth: 32
VBlank: 16, VOverPlus: 4, VSyncWidth: 4
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J 
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC2
  DDC reg: 0x68
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVDS
  DDC reg: 0x1a0
(II) RADEON(0): Port2:
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: QDS  Model: 41  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.575 redY: 0.359   greenX: 0.319 greenY: 0.532
(II) RADEON(0): blueX: 0.155 blueY: 0.129   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) RADEON(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 804  v_sync_end 808 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  QUANTADISPLAY
(II) RADEON(0):  QD15TL072
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004493410000000000
(II) RADEON(0): 	000f0103802115780a4dc0935c518827
(II) RADEON(0): 	21505400000001010101010101010101
(II) RADEON(0): 	010101010101ea1a0080502010301520
(II) RADEON(0): 	44004bcf100000180000000f0008002a
(II) RADEON(0): 	0001000400324a041901000000fe0051
(II) RADEON(0): 	55414e5441444953504c4159000000fe
(II) RADEON(0): 	0051443135544c3037320a2020200089
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: QDS  Model: 41  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.575 redY: 0.359   greenX: 0.319 greenY: 0.532
(II) RADEON(0): blueX: 0.155 blueY: 0.129   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) RADEON(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 804  v_sync_end 808 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  QUANTADISPLAY
(II) RADEON(0):  QD15TL072
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004493410000000000
(II) RADEON(0): 	000f0103802115780a4dc0935c518827
(II) RADEON(0): 	21505400000001010101010101010101
(II) RADEON(0): 	010101010101ea1a0080502010301520
(II) RADEON(0): 	44004bcf100000180000000f0008002a
(II) RADEON(0): 	0001000400324a041901000000fe0051
(II) RADEON(0): 	55414e5441444953504c4159000000fe
(II) RADEON(0): 	0051443135544c3037320a2020200089
(II) RADEON(0): EDID vendor "QDS", prod id 65
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit c8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x7fff7800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x7fff7800 0x7fff7800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 3
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00642800
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00647800
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
disable TVDAC
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x7fff7800 0x7fff7800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device TypeMatrix.com USB Keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) TypeMatrix.com USB Keyboard: always reports core events
(**) TypeMatrix.com USB Keyboard: Device: "/dev/input/event11"
(II) TypeMatrix.com USB Keyboard: Found 1 mouse buttons
(II) TypeMatrix.com USB Keyboard: Found scroll wheel(s)
(II) TypeMatrix.com USB Keyboard: Found relative axes
(II) TypeMatrix.com USB Keyboard: Found absolute axes
(II) TypeMatrix.com USB Keyboard: Found keys
(II) TypeMatrix.com USB Keyboard: Configuring as mouse
(II) TypeMatrix.com USB Keyboard: Configuring as keyboard
(**) TypeMatrix.com USB Keyboard: YAxisMapping: buttons 4 and 5
(**) TypeMatrix.com USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(EE) TypeMatrix.com USB Keyboard: failed to initialize for relative axes.
(**) TypeMatrix.com USB Keyboard: (accel) keeping acceleration scheme 1
(**) TypeMatrix.com USB Keyboard: (accel) acceleration profile 0
(II) TypeMatrix.com USB Keyboard: initialized for absolute axes.
(II) config/hal: Adding input device TypeMatrix.com USB Keyboard
(**) TypeMatrix.com USB Keyboard: always reports core events
(**) TypeMatrix.com USB Keyboard: Device: "/dev/input/event10"
(II) TypeMatrix.com USB Keyboard: Found keys
(II) TypeMatrix.com USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "3"
(**) Option "TapButton3" "2"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event6"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(II) TypeMatrix.com USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) TypeMatrix.com USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x7fff7800 0x7fff7800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x81ff8000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV


le xorg.conf correspondant :

Code : Tout sélectionner

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
	Load  "dri"
	Load  "dri2"
	Load  "extmod"
	Load  "glx"
	Load  "dbe"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  330   210	# mm
	Identifier   "Monitor0"
	VendorName   "QDS"
	ModelName    "41"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RS482 [Radeon Xpress 200M]"
	BusID       "PCI:1:5:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
J'ai essayé avec et sans xorg.conf : même problème.

J'ai aussi essayé avec le kernel-lts (2.6.27). startx me renvoie la même chose. Par contre, quand je lance gdm manuellement par un :

Code : Tout sélectionner

sudo /etc/rc.d/gdm start
je peux avoir une session graphique.

Bizarre, non ?


Vous auriez des pistes ?


Merci et bonnes fêtes à tous !
Murzan
archer
Messages : 123
Inscription : sam. 06 juin 2009, 14:29

Re: [xorg] écran noir au lancement de X

Message par Murzan »

J'ai le même souci sur machine possédant une ATI 9550
Pas de solution trouvée pour le moment, du nouveau de votre côté ?
BelOuille
Hankyu
Messages : 26
Inscription : ven. 06 mars 2009, 22:17

Re: [xorg] écran noir au lancement de X

Message par BelOuille »

Non, rien de nouveau. La seule façon de contourner le problème est de blacklister gdm dans le rc.conf et de lancer manuellement gdm à chaque démarrage avec : sudo /etc/rc.d/gdm start

:?
Avatar de l’utilisateur
lenglemetz
Chu Ko Nu
Messages : 307
Inscription : dim. 27 mai 2007, 22:26
Localisation : Marmande
Contact :

Re: [xorg] écran noir au lancement de X

Message par lenglemetz »

Hello,

Il existe un probleme avec les pilotes radeon qui font un conflit avec kms pour regler le souci il suffit de bloquer ce dernier dans le menu.lst de grub en ajoutant

"radeon.modeset=0" sur la ligne du kernel et au pire des cas si ça passe toujours pas on peu aussi ajouter ceci "nomodeset"

ce qui donne :

kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/bf4ac11b-873e-4666-90e7-2ba3073c59a5 resume=/dev/sda2 ro radeon.modeset=0 nomodeset

il y a plus d'info sur le site anglais > http://wiki.archlinux.org/index.php/Radeon
[Thème] Sujet (état) |<
🇨🇵🎮 @donf_me • 🔥 StreaminG • La TeaM à DonF
BelOuille
Hankyu
Messages : 26
Inscription : ven. 06 mars 2009, 22:17

Re: [xorg] écran noir au lancement de X

Message par BelOuille »

Merci de ta réponse, je vais voir ce que ça donne.

Mais, cependant, était-ce normal d'avoir aussi ce problème avec le kernel-tls (2.6.27) ? Kms n'est pas activé avec ce noyau.

Tu crois qu'avec le kernel 2.6.32 le problème sera résolu ?
Avatar de l’utilisateur
lenglemetz
Chu Ko Nu
Messages : 307
Inscription : dim. 27 mai 2007, 22:26
Localisation : Marmande
Contact :

Re: [xorg] écran noir au lancement de X

Message par lenglemetz »

Test déjà avec la commande sur grub si c'est pas ça on cherchera ailleurs :)
[Thème] Sujet (état) |<
🇨🇵🎮 @donf_me • 🔥 StreaminG • La TeaM à DonF
Murzan
archer
Messages : 123
Inscription : sam. 06 juin 2009, 14:29

Re: [xorg] écran noir au lancement de X

Message par Murzan »

Me concernant, l'ajout de ces deux options n'a pas résolu le problème :/
La machine fonctionne par contre sous Debian (en 2.6.26 si je ne m'abuse) le problème serait-il lié au kernel ?
Répondre