[Xorg et ATI] Rétablir les pilotes libres (résolu)

Xorg, Compiz, KDE / Gnome / Xfce / Fluxbox / e17 / fvwm ... GDM/KDM/XDM...
Belvar
newbie
Messages : 5
Inscription : sam. 09 avr. 2011, 15:48

[Xorg et ATI] Rétablir les pilotes libres (résolu)

Message par Belvar »

Bonjour à tous,

On a installé sur mon PC ce magnifique système qu'est ArchLinux avec les drivers libres pour ma carte ATI (ATI Mobility radeon HD 5870).
Au début, elle n'était pas bien reconnue, ce qui était assez embêtant, mais au fur et à mesures des mises à jours, j'ai acquis une accélération 3D qui me permettait de jouer à Minecraft ou Megaglest, sans avoir à effectuer un reboot sous Windows.
Voulant réduire la température de ma CG et réduire le bruit de mon ventilateur, j'ai tenté d'installer la dernière version de catalyst (11.4). Or, de nombreux soucis au redémarrage m'ont convaincu que la solution libre était préférable. J'ai donc naïvement pensé qu'une réinstallation des paquets désinstallés par catalyst et la suppression de xorg.conf suffiraient. J'ai donc réinstallé libgl et xf86-video-ati. (catalyst a été installé via le site officiel et non par pacman)
Or, ce fut un "retour aux sources". L'ordinateur se comporte comme lors de l'installation et je n'ai plus le droit à la 3D.
Autre symptômes :
-La résolution se mettait en native lors du démarrage d'arch, mais maintenant seul la partie graphique et dans la bonne résolution.
-La sonde pour la température de la CG n'est plus reconnue.

J'imagine donc qu'il faut configurer xorg pour qu'il détecte ma CG avec le driver libre, mais mes recherches ont été infructueuses et c'est pourquoi je me tourne vers la communauté.

Le fichier Xorg.0.log est trop long, voici la première moitié :

Code : Tout sélectionner

 
[    12.280] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    12.322] 
X.Org X Server 1.9.4.901 (1.9.5 RC 1)
Release Date: 2011-03-04
[    12.322] X Protocol Version 11, Revision 0
[    12.322] Build Operating System: Linux 2.6.37-ARCH x86_64 
[    12.322] Current Operating System: Linux gwenn_laptop 2.6.37-ARCH #1 SMP PREEMPT Fri Mar 25 15:10:00 CET 2011 x86_64
[    12.322] Kernel command line: root=/dev/sda5 ro
[    12.322] Build Date: 14 March 2011  10:38:06AM
[    12.322]  
[    12.322] Current version of pixman: 0.20.2
[    12.322] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    12.322] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.323] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr  9 16:52:35 2011
[    12.477] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.250] (==) No Layout section.  Using the first Screen section.
[    13.250] (==) No screen section available. Using defaults.
[    13.250] (**) |-->Screen "Default Screen Section" (0)
[    13.250] (**) |   |-->Monitor "<default monitor>"
[    13.250] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    13.250] (**) |   |-->Device "CYPRESS"
[    13.250] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    13.250] (==) Automatically adding devices
[    13.250] (==) Automatically enabling devices
[    13.333] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    13.333] 	Entry deleted from font path.
[    13.444] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    13.444] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.444] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.444] (II) Loader magic: 0x7d42e0
[    13.444] (II) Module ABI versions:
[    13.444] 	X.Org ANSI C Emulation: 0.4
[    13.444] 	X.Org Video Driver: 8.0
[    13.444] 	X.Org XInput driver : 11.0
[    13.444] 	X.Org Server Extension : 4.0
[    13.445] (--) PCI:*(0:1:0:0) 1002:68a0:1462:1054 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    13.445] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    13.445] (II) LoadModule: "extmod"
[    13.636] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    13.661] (II) Module extmod: vendor="X.Org Foundation"
[    13.661] 	compiled for 1.9.4.901, module version = 1.0.0
[    13.661] 	Module class: X.Org Server Extension
[    13.661] 	ABI class: X.Org Server Extension, version 4.0
[    13.661] (II) Loading extension MIT-SCREEN-SAVER
[    13.661] (II) Loading extension XFree86-VidModeExtension
[    13.661] (II) Loading extension XFree86-DGA
[    13.661] (II) Loading extension DPMS
[    13.661] (II) Loading extension XVideo
[    13.661] (II) Loading extension XVideo-MotionCompensation
[    13.661] (II) Loading extension X-Resource
[    13.661] (II) LoadModule: "dbe"
[    13.662] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    13.676] (II) Module dbe: vendor="X.Org Foundation"
[    13.676] 	compiled for 1.9.4.901, module version = 1.0.0
[    13.676] 	Module class: X.Org Server Extension
[    13.676] 	ABI class: X.Org Server Extension, version 4.0
[    13.676] (II) Loading extension DOUBLE-BUFFER
[    13.676] (II) LoadModule: "glx"
[    13.676] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.709] (II) Module glx: vendor="X.Org Foundation"
[    13.709] 	compiled for 1.9.4.901, module version = 1.0.0
[    13.709] 	ABI class: X.Org Server Extension, version 4.0
[    13.709] (==) AIGLX enabled
[    13.709] (II) Loading extension GLX
[    13.710] (II) LoadModule: "record"
[    13.710] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    13.740] (II) Module record: vendor="X.Org Foundation"
[    13.740] 	compiled for 1.9.4.901, module version = 1.13.0
[    13.740] 	Module class: X.Org Server Extension
[    13.740] 	ABI class: X.Org Server Extension, version 4.0
[    13.740] (II) Loading extension RECORD
[    13.740] (II) LoadModule: "dri"
[    13.740] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    13.794] (II) Module dri: vendor="X.Org Foundation"
[    13.794] 	compiled for 1.9.4.901, module version = 1.0.0
[    13.794] 	ABI class: X.Org Server Extension, version 4.0
[    13.794] (II) Loading extension XFree86-DRI
[    13.794] (II) LoadModule: "dri2"
[    13.794] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    13.814] (II) Module dri2: vendor="X.Org Foundation"
[    13.814] 	compiled for 1.9.4.901, module version = 1.2.0
[    13.814] 	ABI class: X.Org Server Extension, version 4.0
[    13.814] (II) Loading extension DRI2
[    13.814] (II) LoadModule: "radeon"
[    13.815] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    13.919] (II) Module radeon: vendor="X.Org Foundation"
[    13.919] 	compiled for 1.9.4, module version = 6.14.0
[    13.919] 	Module class: X.Org Video Driver
[    13.919] 	ABI class: X.Org Video Driver, version 8.0
[    13.927] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
// [... Descripttion des modèles de CG] 
	Mobility Radeon HD 6000 Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, BARTS, BARTS, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6800 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS
[    13.932] (++) using VT number 7

[    13.934] (II) [KMS] drm report modesetting isn't supported.
[    13.934] (II) RADEON(0): TOTO SAYS 00000000d0020000
[    13.934] (II) RADEON(0): MMIO registers at 0x00000000d0020000: size 128KB
[    13.934] (II) RADEON(0): PCI bus 1 card 0 func 0
[    13.934] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    13.934] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    13.934] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    13.936] (==) RADEON(0): Default visual is TrueColor
[    13.936] (II) Loading sub module "vgahw"
[    13.936] (II) LoadModule: "vgahw"
[    13.936] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    13.946] (II) Module vgahw: vendor="X.Org Foundation"
[    13.946] 	compiled for 1.9.4.901, module version = 0.1.0
[    13.946] 	ABI class: X.Org Video Driver, version 8.0
[    13.946] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[    13.946] (==) RADEON(0): RGB weight 888
[    13.946] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    13.947] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 5800 Series" (ChipID = 0x68a0)
[    13.947] (--) RADEON(0): Linear framebuffer at 0x00000000c0000000
[    13.947] (II) RADEON(0): PCIE card detected
[    13.947] (II) Loading sub module "int10"
[    13.947] (II) LoadModule: "int10"
[    14.003] (II) Loading /usr/lib/xorg/modules/libint10.so
[    14.051] (II) Module int10: vendor="X.Org Foundation"
[    14.051] 	compiled for 1.9.4.901, module version = 1.0.0
[    14.051] 	ABI class: X.Org Video Driver, version 8.0
[    14.051] (II) RADEON(0): initializing int10
[    14.051] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[    14.051] (II) RADEON(0): ATOM BIOS detected
[    14.071] (II) RADEON(0): ATOM BIOS Rom: 
[    14.071] 	SubsystemVendorID: 0x1462 SubsystemID: 0x1054
[    14.071] 	IOBaseAddress: 0xd000
[    14.071] 	Filename: BR36532.018 
[    14.071] 	BIOS Bootup Message: 

MSI 1727 GDDR5 64Mx16 MxM UCODEv:126                                        


[    14.071] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
[    14.071] (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffec
[    14.071] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
[    14.071] (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffec
[    14.071] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[    14.071] (II) RADEON(0): Default Engine Clock: 700000
[    14.071] (II) RADEON(0): Default Memory Clock: 1000000
[    14.071] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[    14.071] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[    14.071] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 27000
[    14.071] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6750
[    14.071] (II) RADEON(0): Maximum Pixel Clock: 400000
[    14.071] (II) RADEON(0): Reference Clock: 27000
[    14.071] (II) RADEON(0): No DRI yet on Evergreen
[    14.071] (II) RADEON(0): using shadow framebuffer
[    14.071] (II) Loading sub module "shadow"
[    14.071] (II) LoadModule: "shadow"
[    14.071] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    14.095] (II) Module shadow: vendor="X.Org Foundation"
[    14.095] 	compiled for 1.9.4.901, module version = 1.1.0
[    14.095] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.095] (II) RADEON(0): Detected total video RAM=1048576K, accessible=262144K (PCI BAR=262144K)
[    14.095] (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
[    14.095] (II) RADEON(0): Color tiling disabled
[    14.095] (II) Loading sub module "ddc"
[    14.095] (II) LoadModule: "ddc"
[    14.095] (II) Module "ddc" already built-in
[    14.095] (II) Loading sub module "i2c"
[    14.095] (II) LoadModule: "i2c"
[    14.095] (II) Module "i2c" already built-in
[    14.126] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
[    14.126] (WW) RADEON(0): LVDS Info:
XRes: 1680, YRes: 1050, DotClock: 121440
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 50, VOverPlus: 2, VSyncWidth: 6
[    14.126] (II) RADEON(0): Output LVDS has no monitor section
[    14.126] (II) RADEON(0): I2C bus "LVDS" initialized.
[    14.126] (II) RADEON(0): Output HDMI-0 has no monitor section
[    14.126] (II) RADEON(0): I2C bus "HDMI-0" initialized.
[    14.126] (II) RADEON(0): Output VGA-0 has no monitor section
[    14.126] (II) RADEON(0): I2C bus "VGA-0" initialized.
[    14.126] (II) RADEON(0): Port0:
[    14.126]   XRANDR name: LVDS
[    14.126]   Connector: LVDS
[    14.126]   LCD1: INTERNAL_UNIPHY
[    14.126]   DDC reg: 0x6470
[    14.126] (II) RADEON(0): Port1:
[    14.126]   XRANDR name: HDMI-0
[    14.126]   Connector: HDMI-A
[    14.126]   DFP1: INTERNAL_UNIPHY1
[    14.126]   DDC reg: 0x6430
[    14.126] (II) RADEON(0): Port2:
[    14.126]   XRANDR name: VGA-0
[    14.126]   Connector: VGA
[    14.126]   CRT1: INTERNAL_KLDSCP_DAC1
[    14.126]   DDC reg: 0x64d8
[    14.126] (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
[    14.179] (II) RADEON(0): EDID for output LVDS
[    14.179] (II) RADEON(0): Manufacturer: SEC  Model: 4a47  Serial#: 0
[    14.179] (II) RADEON(0): Year: 2008  Week: 0
[    14.179] (II) RADEON(0): EDID Version: 1.3
[    14.179] (II) RADEON(0): Digital Display Input
[    14.179] (II) RADEON(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[    14.179] (II) RADEON(0): Gamma: 2.20
[    14.179] (II) RADEON(0): No DPMS capabilities specified
[    14.179] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    14.179] (II) RADEON(0): First detailed timing is preferred mode
[    14.179] (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    14.179] (II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    14.179] (II) RADEON(0): Manufacturer's mask: 0
[    14.179] (II) RADEON(0): Supported detailed timing:
[    14.179] (II) RADEON(0): clock: 121.4 MHz   Image Size:  365 x 228 mm
[    14.179] (II) RADEON(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    14.179] (II) RADEON(0): v_active: 1050  v_sync: 1052  v_sync_end 1058 v_blanking: 1100 v_border: 0
[    14.179] (II) RADEON(0): Unknown vendor-specific block f
[    14.179] (II) RADEON(0):  SAMSUNG
[    14.179] (II) RADEON(0):  170MT02-M01
[    14.179] (II) RADEON(0): EDID (in hex):
[    14.179] (II) RADEON(0): 	00ffffffffffff004ca3474a00000000
[    14.180] (II) RADEON(0): 	00120103802517780a87f594574f8c27
[    14.180] (II) RADEON(0): 	27505400000001010101010101010101
[    14.180] (II) RADEON(0): 	010101010101702f90a0601a32403020
[    14.180] (II) RADEON(0): 	26006de4100000190000000f00000000
[    14.180] (II) RADEON(0): 	0000000000415f051900000000fe0053
[    14.180] (II) RADEON(0): 	414d53554e470a2020202020000000fe
[    14.180] (II) RADEON(0): 	003137304d5430322d4d30310a200012
[    14.180] (II) RADEON(0): EDID vendor "SEC", prod id 19015
[    14.180] (II) RADEON(0): Printing DDC gathered Modelines:
[    14.180] (II) RADEON(0): Modeline "1680x1050"x0.0  121.44  1680 1728 1760 1840  1050 1052 1058 1100 -hsync -vsync (66.0 kHz)
[    14.180] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[    14.180] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[    14.180] (II) RADEON(0): Manufacturer: SEC  Model: 4a47  Serial#: 0
[    14.180] (II) RADEON(0): Year: 2008  Week: 0
[    14.180] (II) RADEON(0): EDID Version: 1.3
[    14.180] (II) RADEON(0): Digital Display Input
[    14.180] (II) RADEON(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[    14.180] (II) RADEON(0): Gamma: 2.20
[    14.180] (II) RADEON(0): No DPMS capabilities specified
[    14.180] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    14.180] (II) RADEON(0): First detailed timing is preferred mode
[    14.180] (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    14.180] (II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    14.180] (II) RADEON(0): Manufacturer's mask: 0
[    14.180] (II) RADEON(0): Supported detailed timing:
[    14.180] (II) RADEON(0): clock: 121.4 MHz   Image Size:  365 x 228 mm
[    14.180] (II) RADEON(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    14.180] (II) RADEON(0): v_active: 1050  v_sync: 1052  v_sync_end 1058 v_blanking: 1100 v_border: 0
[    14.180] (II) RADEON(0): Unknown vendor-specific block f
[    14.180] (II) RADEON(0):  SAMSUNG
[    14.180] (II) RADEON(0):  170MT02-M01
[    14.180] (II) RADEON(0): EDID (in hex):
[    14.180] (II) RADEON(0): 	00ffffffffffff004ca3474a00000000
[    14.180] (II) RADEON(0): 	00120103802517780a87f594574f8c27
[    14.180] (II) RADEON(0): 	27505400000001010101010101010101
[    14.180] (II) RADEON(0): 	010101010101702f90a0601a32403020
[    14.180] (II) RADEON(0): 	26006de4100000190000000f00000000
[    14.180] (II) RADEON(0): 	0000000000415f051900000000fe0053
[    14.180] (II) RADEON(0): 	414d53554e470a2020202020000000fe
[    14.180] (II) RADEON(0): 	003137304d5430322d4d30310a200012
[    14.180] finished output detect: 0
[    14.180] (II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
[    14.183] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[    14.183] finished output detect: 1
[    14.183] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
[    14.192] Dac detection success
[    14.192] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[    14.192] finished output detect: 2
[    14.192] finished all detect
[    14.246] (II) RADEON(0): EDID for output LVDS
[    14.246] (II) RADEON(0): Manufacturer: SEC  Model: 4a47  Serial#: 0
[    14.246] (II) RADEON(0): Year: 2008  Week: 0
[    14.246] (II) RADEON(0): EDID Version: 1.3
[    14.246] (II) RADEON(0): Digital Display Input
[    14.246] (II) RADEON(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[    14.246] (II) RADEON(0): Gamma: 2.20
[    14.246] (II) RADEON(0): No DPMS capabilities specified
[    14.246] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    14.246] (II) RADEON(0): First detailed timing is preferred mode
[    14.246] (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    14.246] (II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    14.246] (II) RADEON(0): Manufacturer's mask: 0
[    14.246] (II) RADEON(0): Supported detailed timing:
[    14.246] (II) RADEON(0): clock: 121.4 MHz   Image Size:  365 x 228 mm
[    14.246] (II) RADEON(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    14.246] (II) RADEON(0): v_active: 1050  v_sync: 1052  v_sync_end 1058 v_blanking: 1100 v_border: 0
[    14.246] (II) RADEON(0): Unknown vendor-specific block f
[    14.246] (II) RADEON(0):  SAMSUNG
[    14.246] (II) RADEON(0):  170MT02-M01
[    14.246] (II) RADEON(0): EDID (in hex):
[    14.246] (II) RADEON(0): 	00ffffffffffff004ca3474a00000000
[    14.246] (II) RADEON(0): 	00120103802517780a87f594574f8c27
[    14.246] (II) RADEON(0): 	27505400000001010101010101010101
[    14.246] (II) RADEON(0): 	010101010101702f90a0601a32403020
[    14.246] (II) RADEON(0): 	26006de4100000190000000f00000000
[    14.246] (II) RADEON(0): 	0000000000415f051900000000fe0053
[    14.246] (II) RADEON(0): 	414d53554e470a2020202020000000fe
[    14.246] (II) RADEON(0): 	003137304d5430322d4d30310a200012
[    14.246] (II) RADEON(0): EDID vendor "SEC", prod id 19015
[    14.246] (II) RADEON(0): Printing DDC gathered Modelines:
[    14.246] (II) RADEON(0): Modeline "1680x1050"x0.0  121.44  1680 1728 1760 1840  1050 1052 1058 1100 -hsync -vsync (66.0 kHz)
[    14.246] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[    14.246] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[    14.246] (II) RADEON(0): Manufacturer: SEC  Model: 4a47  Serial#: 0
[    14.246] (II) RADEON(0): Year: 2008  Week: 0
[    14.246] (II) RADEON(0): EDID Version: 1.3
[    14.246] (II) RADEON(0): Digital Display Input
[    14.246] (II) RADEON(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[    14.246] (II) RADEON(0): Gamma: 2.20
[    14.246] (II) RADEON(0): No DPMS capabilities specified
[    14.246] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    14.246] (II) RADEON(0): First detailed timing is preferred mode
[    14.246] (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    14.246] (II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    14.246] (II) RADEON(0): Manufacturer's mask: 0
[    14.246] (II) RADEON(0): Supported detailed timing:
[    14.246] (II) RADEON(0): clock: 121.4 MHz   Image Size:  365 x 228 mm
[    14.246] (II) RADEON(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    14.246] (II) RADEON(0): v_active: 1050  v_sync: 1052  v_sync_end 1058 v_blanking: 1100 v_border: 0
[    14.246] (II) RADEON(0): Unknown vendor-specific block f
[    14.246] (II) RADEON(0):  SAMSUNG
[    14.246] (II) RADEON(0):  170MT02-M01
[    14.246] (II) RADEON(0): EDID (in hex):
[    14.246] (II) RADEON(0): 	00ffffffffffff004ca3474a00000000
[    14.246] (II) RADEON(0): 	00120103802517780a87f594574f8c27
[    14.246] (II) RADEON(0): 	27505400000001010101010101010101
[    14.246] (II) RADEON(0): 	010101010101702f90a0601a32403020
[    14.246] (II) RADEON(0): 	26006de4100000190000000f00000000
[    14.246] (II) RADEON(0): 	0000000000415f051900000000fe0053
[    14.246] (II) RADEON(0): 	414d53554e470a2020202020000000fe
[    14.246] (II) RADEON(0): 	003137304d5430322d4d30310a200012
[    14.246] (II) RADEON(0): EDID vendor "SEC", prod id 19015
[    14.246] (II) RADEON(0): Printing probed modes for output LVDS
[    14.246] (II) RADEON(0): Modeline "1680x1050"x60.0  121.44  1680 1728 1760 1840  1050 1052 1058 1100 -hsync -vsync (66.0 kHz)
[    14.246] (II) RADEON(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[    14.246] (II) RADEON(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[    14.246] (II) RADEON(0): Modeline "1440x900"x59.9  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    14.246] (II) RADEON(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz)
[    14.246] (II) RADEON(0): Modeline "1280x854"x59.9   89.25  1280 1352 1480 1680  854 857 867 887 -hsync +vsync (53.1 kHz)
[    14.246] (II) RADEON(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    14.246] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    14.246] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    14.246] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    14.246] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    14.246] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    14.250] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[    14.250] (II) RADEON(0): EDID for output HDMI-0
[    14.259] Dac detection success
[    14.259] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[    14.259] (II) RADEON(0): EDID for output VGA-0
[    14.259] (II) RADEON(0): Output LVDS connected
[    14.259] (II) RADEON(0): Output HDMI-0 disconnected
[    14.259] (II) RADEON(0): Output VGA-0 disconnected
[    14.259] (II) RADEON(0): Using exact sizes for initial modes
[    14.259] (II) RADEON(0): Output LVDS using initial mode 1680x1050
[    14.259] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    14.259] (**) RADEON(0): Display dimensions: (370, 230) mm
[    14.259] (**) RADEON(0): DPI set to (115, 185)
[    14.259] (II) Loading sub module "fb"
[    14.259] (II) LoadModule: "fb"
[    14.259] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.274] (II) Module fb: vendor="X.Org Foundation"
[    14.274] 	compiled for 1.9.4.901, module version = 1.0.0
[    14.274] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.274] (II) Loading sub module "ramdac"
[    14.274] (II) LoadModule: "ramdac"
[    14.274] (II) Module "ramdac" already built-in
[    14.275] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
[    14.275] (--) Depth 24 pixmap format is 32 bpp
[    14.275] (II) RADEON(0): RADEONScreenInit c0000000 0 0
[    14.457] Output UNIPHY0 transmitter setup success
[    14.457] Blank CRTC 0 success
[    14.457] Disable CRTC memreq 0 success
[    14.471] Disable CRTC 0 success
[    14.471] Blank CRTC 1 success
[    14.471] Disable CRTC memreq 1 success
[    14.471] Disable CRTC 1 success
[    14.471] Blank CRTC 2 success
[    14.471] Disable CRTC memreq 2 success
[    14.471] Disable CRTC 2 success
[    14.471] Blank CRTC 3 success
[    14.471] Disable CRTC memreq 3 success
[    14.471] Disable CRTC 3 success
[    14.471] Blank CRTC 4 success
[    14.471] Disable CRTC memreq 4 success
[    14.471] Disable CRTC 4 success
[    14.472] Blank CRTC 5 success
[    14.472] Disable CRTC memreq 5 success
[    14.472] Disable CRTC 5 success
[    14.472] (II) RADEON(0): Dynamic Power Management Disabled
[    14.472] mc fb loc is 00cf00c0
[    14.472] (II) RADEON(0): RADEONInitMemoryMap() : 
[    14.472] (II) RADEON(0):   mem_size         : 0x10000000
[    14.472] (II) RADEON(0):   MC_FB_LOCATION   : 0x00cf00c0
[    14.472] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    14.472] (II) RADEON(0): Depth moves disabled by default
[    14.472] (II) RADEON(0): Memory manager initialized to (0,0) (1792,8191)
[    14.472] (II) RADEON(0): Reserved area from (0,1680) to (1792,1682)
[    14.472] (II) RADEON(0): Largest offscreen area available: 1792 x 6509
[    14.505] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[    14.505] (II) RADEON(0):   MC_FB_LOCATION   : 0x00cf00c0 0x003f0000
[    14.505] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    14.516] (==) RADEON(0): Backing store disabled
[    14.516] (WW) RADEON(0): Direct rendering disabled
[    14.516] (EE) RADEON(0): Acceleration initialization failed
[    14.516] (II) RADEON(0): Acceleration disabled
[    14.516] (==) RADEON(0): DPMS enabled
[    14.516] (==) RADEON(0): Silken mouse enabled
[    14.523] (II) RADEON(0): Will use 96 kb for hardware cursor 0 at offset 0x00b80000
[    14.523] (II) RADEON(0): Will use 96 kb for hardware cursor 1 at offset 0x00b85000
[    14.523] (II) RADEON(0): Will use 96 kb for hardware cursor 2 at offset 0x00b8a000
[    14.523] (II) RADEON(0): Will use 96 kb for hardware cursor 3 at offset 0x00b90000
[    14.523] (II) RADEON(0): Will use 96 kb for hardware cursor 4 at offset 0x00b95000
[    14.523] (II) RADEON(0): Will use 96 kb for hardware cursor 5 at offset 0x00b9a000
[    14.523] (II) RADEON(0): Largest offscreen area available: 1792 x 6491
[    14.523] (II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
[    14.527] Output UNIPHY0 transmitter setup success
[    14.527] Output UNIPHY1 transmitter setup success
[    14.527] Output CRT1 disable success
[    14.527] Blank CRTC 0 success
[    14.527] Disable CRTC memreq 0 success
[    14.527] Disable CRTC 0 success
[    14.527] Blank CRTC 1 success
[    14.527] Disable CRTC memreq 1 success
[    14.527] Disable CRTC 1 success
[    14.527] Blank CRTC 2 success
[    14.527] Disable CRTC memreq 2 success
[    14.527] Disable CRTC 2 success
[    14.527] Blank CRTC 3 success
[    14.527] Disable CRTC memreq 3 success
[    14.527] Disable CRTC 3 success
[    14.527] Blank CRTC 4 success
[    14.527] Disable CRTC memreq 4 success
[    14.527] Disable CRTC 4 success
[    14.527] Blank CRTC 5 success
[    14.527] Disable CRTC memreq 5 success
[    14.527] Disable CRTC 5 success
[    14.564] Output UNIPHY0 transmitter setup success
[    14.564] Blank CRTC 0 success
[    14.564] Disable CRTC memreq 0 success
[    14.564] Disable CRTC 0 success
[    14.564] Set CRTC 0 Source success
[    14.564] Mode 1680x1050 - 1840 1100 10
[    14.564] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[    14.564] (II) RADEON(0):   MC_FB_LOCATION   : 0x00cf00c0 0x00cf00c0
[    14.564] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    14.574] Set DCPLL success
[    14.574] Picked PLL 0
[    14.574] before 12144 0x0
[    14.574] after 12144 0 0
[    14.574] best_freq: 121500
[    14.574] best_feedback_div: 81
[    14.574] best_frac_feedback_div: 0
[    14.574] best_ref_div: 2
[    14.574] best_post_div: 9
[    14.574] (II) RADEON(0): crtc(0) Clock: mode 121440, PLL 1215000
[    14.574] (II) RADEON(0): crtc(0) PLL  : refdiv 2, fbdiv 0x51(81), fracfbdiv 0, pdiv 9
[    14.577] Set CRTC 0 PLL success
[    14.577] Set DTD CRTC Timing success
[    14.577] Set CRTC 0 Overscan success
[    14.577] Not using RMX
[    14.577] scaler 0 setup success
[    14.577] Set CRTC 0 Source success
[    14.947] Output UNIPHY0 transmitter setup success
[    14.948] Output DIG0 encoder setup success
[    14.948] Output UNIPHY0 transmitter setup success
[    15.497] Output UNIPHY0 transmitter setup success
[    15.497] Output UNIPHY0 transmitter setup success
[    15.497] Enable CRTC 0 success
[    15.497] Enable CRTC memreq 0 success
[    15.497] Unblank CRTC 0 success
[    15.497] Output UNIPHY1 transmitter setup success
[    15.497] Output CRT1 disable success
[    15.497] Blank CRTC 1 success
[    15.497] Disable CRTC memreq 1 success
[    15.497] Disable CRTC 1 success
[    15.497] Blank CRTC 2 success
[    15.497] Disable CRTC memreq 2 success
[    15.497] Disable CRTC 2 success
[    15.497] Blank CRTC 3 success
[    15.497] Disable CRTC memreq 3 success
[    15.497] Disable CRTC 3 success
[    15.497] Blank CRTC 4 success
[    15.497] Disable CRTC memreq 4 success
[    15.497] Disable CRTC 4 success
[    15.497] Blank CRTC 5 success
[    15.497] Disable CRTC memreq 5 success
[    15.497] Disable CRTC 5 success
[    15.497] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    15.498] (--) RandR disabled
Comme vous l'avez peut-être remarqué, je suis novice dans l'utilisation d'arch (ce n'est pas moi qui ai fait l'install), mais je n'aspire qu'à apprendre d'avantage !
En vous remerciant pour vos réponses, armé de cat pour transmettre le contenu d'éventuels fichiers,

Belvar
Dernière modification par Belvar le jeu. 14 avr. 2011, 14:45, modifié 1 fois.
_alexmyself
Chu Ko Nu
Messages : 405
Inscription : lun. 18 sept. 2006, 16:21
Localisation : france, yvelines 78

Re: [Xorg et ATI] Rétablir les pilotes libres (non résolu)

Message par _alexmyself »

tu devrais aller voir le wiki fr ou en, y'a toute la procédure pour installer correctement, notemment quelques commandes pour générer un xorg.conf flambant neuf (Xconfigure je crois..)

voilà le mien, tu peut t'en inspirer, mais vaudrait largement mieux en générer un tout propre qui colle bien à ton système:

Code : Tout sélectionner

Section "ServerLayout"
	Identifier     "Config ATI"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	FontPath     "/usr/share/fonts/75dpi/"
	FontPath     "/usr/share/fonts/100dpi/"
	FontPath     "/usr/share/fonts/misc/"
	FontPath     "/usr/share/fonts/TTF/"
	FontPath     "/usr/share/fonts/Type1/"

	ModulePath   "/usr/lib/xorg/modules"
EndSection


Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section	"InputClass"
	Identifier	"Keyboard Defaults"
	MatchIsKeyboard	"yes"
	Option		"XkbLayout"	"fr"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#Identifier   "Monitor0"
	Identifier	"HDMI-0"
	VendorName   "SAMSUNG"
	ModelName    "P2770HD"
	#Modeline "1920x1080_60.00"  172.80  1920 2040 2248 2576  1080 1081 1084 1118  -HSync +Vsync
	##Modeline "1920x1080_60_2"	182.28 1920 1952 2640 2672 1080 1102 1113 1135
	#Modeline "1680x1050_60.00"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync
	#DisplaySize 600 335
	#Option	"DPI"	"81x82"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "CustomEDID"         	# [<str>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ClockGating"        	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
        #Option     "ForceLowPowerMode"  	# [<bool>]
        #Option     "DynamicPM"          	# [<bool>]
        #Option     "NewPLL"             	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
	Identifier  "meow"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV730 Pro AGP [Radeon HD 4600 Series]"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "meow"
	Monitor    "HDMI-0"
	DefaultDepth	24
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
#		Modes	"1920x1080_60.00" "1680x1050_60.00" "1680x1050" "1280x1024" "1024x768"
		#Modes   "1680x1050_60.00" "1680x1050" "1280x1024" "1024x768"

	EndSubSection
EndSection
le wiki en: https://wiki.archlinux.org/index.php/Ati

bienvenue et bon courage, X est probablement le truc le plus chiant à faire tourner, le reste ca glisse easy :)
Avatar de l’utilisateur
FoolEcho
Maître du Kyudo
Messages : 10707
Inscription : dim. 15 août 2010, 11:48
Localisation : Basse-Normandie

Re: [Xorg et ATI] Rétablir les pilotes libres (non résolu)

Message par FoolEcho »

_alexmyself a écrit :tu devrais aller voir le wiki fr ou en, y'a toute la procédure pour installer correctement, notemment quelques commandes pour générer un xorg.conf flambant neuf (Xconfigure je crois..)
La vraie commande est "X -configure" (mais ati doit avoir son propre outil), sauf qu'il faut mieux s'en passer depuis xorg 1.8 et laisser faire au maximum la détection automatique. Ce qui signifie: le xorg.conf, tu peux le mettre de côté et prévoir juste un petit fichier de configuration pour charger le pilote ati. Si tu utilises le pilote proprio, tu dois désactiver KMS (pareil, cf. wiki).
Tout est bien indiqué dans le lien qu' _alexmyself t'a indiqué. :chinois:
«The following statement is not true. The previous statement is true.» :nage:
Belvar
newbie
Messages : 5
Inscription : sam. 09 avr. 2011, 15:48

Re: [Xorg et ATI] Rétablir les pilotes libres (non résolu)

Message par Belvar »

Effectivement, catalyst avait apparemment désactivé KMS et j'ai pu le reconfigurer grâce au wiki.

MERCI BEAUCOUP à vous !!! :D
Répondre