Archlinux.fr [Forums]

Bonjour

J'ai un problème de driver vidéo avec un PC portable de marque Fujitsu/Siemens "AMILO Pro" :
- il semble qu'openchrome soit requis, mais ne fonctionne pas (écran noir avec zébrures fixes) ;
- vesa fonctionne mal (erreur sur la résolution, plantage et gèle d'écran à l'extinction).
J'ai donc viré openchrome et laissé vesa pour le moment, mais j'aimerais trouver une solution plus "normale".

Code : Tout sélectionner

$ lspci | grep VGA
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] (rev 01)

--- EDIT ---
J'ai vu dans /var/log/Xorg.0.log que le "module efbdev" était requis apparemment, j'ai donc installé xf86-video-fbdev. Pas de changement. Le nouveau /var/log/Xorg.0.log est le suivant (extrait) :

Code : Tout sélectionner

[    27.698] (II) Loading extension XFree86-DRI
[    27.698] (II) LoadModule: "dri2"
[    27.698] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.700] (II) Module dri2: vendor="X.Org Foundation"
[    27.700]    compiled for 1.12.3.901, module version = 1.2.0
[    27.700]    ABI class: X.Org Server Extension, version 6.0
[    27.700] (II) Loading extension DRI2
[    27.700] (==) Matched openchrome as autoconfigured driver 0
[    27.701] (==) Matched vesa as autoconfigured driver 1
[    27.701] (==) Matched fbdev as autoconfigured driver 2
[    27.701] (==) Assigned the driver to the xf86ConfigLayout
[    27.701] (II) LoadModule: "openchrome"
[    27.724] (WW) Warning, couldn't open module openchrome
[    27.724] (II) UnloadModule: "openchrome"
[    27.724] (II) Unloading openchrome
[    27.724] (EE) Failed to load module "openchrome" (module does not exist, 0)
[    27.724] (II) LoadModule: "vesa"
[    27.724] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.727] (II) Module vesa: vendor="X.Org Foundation"
[    27.727]    compiled for 1.12.3, module version = 2.3.2
[    27.727]    Module class: X.Org Video Driver
[    27.727]    ABI class: X.Org Video Driver, version 12.0
[    27.727] (II) LoadModule: "fbdev"
[    27.727] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.729] (II) Module fbdev: vendor="X.Org Foundation"
[    27.729]    compiled for 1.12.2, module version = 0.4.3
[    27.729]    Module class: X.Org Video Driver
[    27.729]    ABI class: X.Org Video Driver, version 12.0
[    27.729] (II) VESA: driver for VESA chipsets: vesa
[    27.729] (II) FBDEV: driver for framebuffer: fbdev
[    27.729] (++) using VT number 7

[    27.744] (WW) Falling back to old probe method for fbdev
[    27.744] (II) Loading sub module "fbdevhw"
[    27.744] (II) LoadModule: "fbdevhw"
[    27.744] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.896] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.896]    compiled for 1.12.3.901, module version = 0.0.2
[    27.896]    ABI class: X.Org Video Driver, version 12.1
[    27.896] (II) Loading sub module "vbe"
[    27.896] (II) LoadModule: "vbe"
[    27.897] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    27.899] (II) Module vbe: vendor="X.Org Foundation"
[    27.899]    compiled for 1.12.3.901, module version = 1.1.0
[    27.899]    ABI class: X.Org Video Driver, version 12.1
[    27.899] (II) Loading sub module "int10"
[    27.899] (II) LoadModule: "int10"
[    27.899] (II) Loading /usr/lib/xorg/modules/libint10.so
[    27.903] (II) Module int10: vendor="X.Org Foundation"
[    27.903]    compiled for 1.12.3.901, module version = 1.0.0
[    27.903]    ABI class: X.Org Video Driver, version 12.1
[    27.903] (II) VESA(0): initializing int10
[    27.914] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[    27.915] (II) VESA(0): VESA BIOS detected
[    27.915] (II) VESA(0): VESA VBE Version 3.0
[    27.915] (II) VESA(0): VESA VBE Total Mem: 262144 kB
[    27.915] (II) VESA(0): VESA VBE OEM: VIA N3364

[    27.915] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[    27.915] (II) VESA(0): VESA VBE OEM Vendor: 
[    27.915] (II) VESA(0): VESA VBE OEM Product: 
[    27.915] (II) VESA(0): VESA VBE OEM Product Rev: 
[    27.962] (II) VESA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    27.962] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[    27.962] (==) VESA(0): RGB weight 888
[    27.962] (==) VESA(0): Default visual is TrueColor
[    27.962] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)

Je ne sais pas trop dans quelle direction chercher. Quelqu'un peut-il m'éclairer ?

Cordialement,

Salut,

Regarde de ce côté peut-être (et la page en général, il y a plusieurs pilotes possibles): https://wiki.archlinux.org/index.php/Vi ... me_9_HC.5D.

Bonjour

Merci FoolEcho,malheureusement je n'ai pas avancé d'un iota.
1) J'ai essayé un par un les drivers openchrome, unichrome, unichrome-dri (avec libgl) plantage à chaque fois.
2) J'ai aussi tenté les variantes expliquées dans la section "troubleshootings" avec openchrome, consistant à ajouter différentes options dans un fichier /etc/X11/xorg.conf.d/10-openchrome.conf, idem.
3) Enfin j'ai essayé de gonserver vesa en déclarant la bonne résolution dans un fichier de conf :

Code : Tout sélectionner

$ cat 10-monitor.conf
Section "Monitor"
    Identifier     "Monitor0"
    Option         "PreferredMode"  "1280x768"
EndSection

Résultat : aucun changement.
Ah si, quand même, depuis que j'ai installé fbdev l'extinction avece vesa ne plante plus l'ordi. Il y a un bref gel d'écran bizarre, mais l'ordi s'éteind quand même.

Bon, ben, si quelqu'un a une autre idée...

Bonjour à tous

Je reviens sur mon problème de pilote graphique, que j'avais abandonné un moment, avec une nouveauté : j'ai démarré sur un LiveCD de Xubuntu 11.10 et tout fonctionne parfaitement. Du coup j'aimerais bien adapter à Arch la méthode appliquée par Xubuntu, sauf que je ne sais pas comment faire.

J'ai regardé le fichier /var/log/Xorg.0.log de Xubuntu, et constaté que environ 80% des lignes concernent "CHROME" ou les drivers graphiques. En voici la plus grande partie (la copie intégrale excédant la taille autorisée sur ce forum, j'ai coupé les premières lignes).

Code : Tout sélectionner

[   113.276] (II) Loading extension MIT-SCREEN-SAVER
[   113.276] (II) Loading extension XFree86-VidModeExtension
[   113.276] (II) Loading extension XFree86-DGA
[   113.276] (II) Loading extension DPMS
[   113.276] (II) Loading extension XVideo
[   113.276] (II) Loading extension XVideo-MotionCompensation
[   113.276] (II) Loading extension X-Resource
[   113.276] (II) LoadModule: "dbe"
[   113.277] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   113.279] (II) Module dbe: vendor="X.Org Foundation"
[   113.279] 	compiled for 1.10.4, module version = 1.0.0
[   113.279] 	Module class: X.Org Server Extension
[   113.279] 	ABI class: X.Org Server Extension, version 5.0
[   113.279] (II) Loading extension DOUBLE-BUFFER
[   113.279] (II) LoadModule: "glx"
[   113.300] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   113.470] (II) Module glx: vendor="X.Org Foundation"
[   113.470] 	compiled for 1.10.4, module version = 1.0.0
[   113.470] 	ABI class: X.Org Server Extension, version 5.0
[   113.488] (==) AIGLX enabled
[   113.488] (II) Loading extension GLX
[   113.488] (II) LoadModule: "record"
[   113.489] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   113.491] (II) Module record: vendor="X.Org Foundation"
[   113.491] 	compiled for 1.10.4, module version = 1.13.0
[   113.491] 	Module class: X.Org Server Extension
[   113.491] 	ABI class: X.Org Server Extension, version 5.0
[   113.491] (II) Loading extension RECORD
[   113.491] (II) LoadModule: "dri"
[   113.497] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   113.515] (II) Module dri: vendor="X.Org Foundation"
[   113.515] 	compiled for 1.10.4, module version = 1.0.0
[   113.515] 	ABI class: X.Org Server Extension, version 5.0
[   113.515] (II) Loading extension XFree86-DRI
[   113.515] (II) LoadModule: "dri2"
[   113.517] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   113.518] (II) Module dri2: vendor="X.Org Foundation"
[   113.518] 	compiled for 1.10.4, module version = 1.2.0
[   113.518] 	ABI class: X.Org Server Extension, version 5.0
[   113.518] (II) Loading extension DRI2
[   113.518] (==) Matched openchrome as autoconfigured driver 0
[   113.518] (==) Matched vesa as autoconfigured driver 1
[   113.518] (==) Matched fbdev as autoconfigured driver 2
[   113.518] (==) Assigned the driver to the xf86ConfigLayout
[   113.518] (II) LoadModule: "openchrome"
[   113.518] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[   113.657] (II) Module openchrome: vendor="http://openchrome.org/"
[   113.658] 	compiled for 1.10.1, module version = 0.2.904
[   113.658] 	Module class: X.Org Video Driver
[   113.658] 	ABI class: X.Org Video Driver, version 10.0
[   113.658] (II) LoadModule: "vesa"
[   113.850] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   113.853] (II) Module vesa: vendor="X.Org Foundation"
[   113.853] 	compiled for 1.10.2, module version = 2.3.0
[   113.853] 	Module class: X.Org Video Driver
[   113.853] 	ABI class: X.Org Video Driver, version 10.0
[   113.853] (II) LoadModule: "fbdev"
[   113.853] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   114.092] (II) Module fbdev: vendor="X.Org Foundation"
[   114.092] 	compiled for 1.10.0, module version = 0.4.2
[   114.092] 	ABI class: X.Org Video Driver, version 10.0
[   114.092] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
	K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
	CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
	VX855/VX875, VX900
[   114.092] (II) VESA: driver for VESA chipsets: vesa
[   114.092] (II) FBDEV: driver for framebuffer: fbdev
[   114.092] (++) using VT number 7

[   114.093] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[   114.093] (!!) VIA Technologies does not support this driver in any way.
[   114.093] (!!) For support, please refer to http://www.openchrome.org/.
[   114.093] (!!) (development build, compiled on Thu May  5 12:46:06 2011)
[   114.093] (WW) Falling back to old probe method for vesa
[   114.093] (WW) Falling back to old probe method for fbdev
[   114.093] (II) Loading sub module "fbdevhw"
[   114.093] (II) LoadModule: "fbdevhw"
[   114.094] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   114.103] (II) Module fbdevhw: vendor="X.Org Foundation"
[   114.103] 	compiled for 1.10.4, module version = 0.0.2
[   114.103] 	ABI class: X.Org Video Driver, version 10.0
[   114.103] (EE) open /dev/fb0: No such file or directory
[   114.103] (II) CHROME(0): VIAPreInit
[   114.103] (II) Loading sub module "vgahw"
[   114.103] (II) LoadModule: "vgahw"
[   114.112] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   114.227] (II) Module vgahw: vendor="X.Org Foundation"
[   114.227] 	compiled for 1.10.4, module version = 0.1.0
[   114.227] 	ABI class: X.Org Video Driver, version 10.0
[   114.227] (II) CHROME(0): VIAGetRec
[   114.227] (II) CHROME(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   114.227] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[   114.227] (==) CHROME(0): RGB weight 888
[   114.227] (==) CHROME(0): Default visual is TrueColor
[   114.227] (--) CHROME(0): Chipset: P4M900/VN896/CN896
[   114.227] (--) CHROME(0): Chipset revision: 0
[   114.227] (--) CHROME(0): Probed amount of VideoRAM = 262144 kB
[   114.227] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[   114.227] (==) CHROME(0): Shadow framebuffer is disabled.
[   114.227] (==) CHROME(0): Hardware acceleration is enabled.
[   114.227] (==) CHROME(0): Using XAA acceleration architecture.
[   114.227] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[   114.227] (==) CHROME(0): GPU virtual command queue will be enabled.
[   114.227] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[   114.227] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled.
[   114.227] (==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
[   114.227] (==) CHROME(0): Will not enable VBE modes.
[   114.227] (==) CHROME(0): VBE VGA register save & restore will not be used
	if VBE modes are enabled.
[   114.227] (==) CHROME(0): Xv Bandwidth check is enabled.
[   114.227] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[   114.227] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[   114.227] (==) CHROME(0): Digital output bus width is 12 bits.
[   114.227] (==) CHROME(0): DVI Center is disabled.
[   114.227] (==) CHROME(0): Panel size is not selected from config file.
[   114.227] (==) CHROME(0): Panel will not be forced.
[   114.227] (==) CHROME(0): TV dotCrawl is disabled.
[   114.227] (==) CHROME(0): TV deflicker is set to 0.
[   114.227] (==) CHROME(0): No default TV type is set.
[   114.227] (==) CHROME(0): No default TV output signal type is set.
[   114.227] (==) CHROME(0): No default TV output port is set.
[   114.227] (II) CHROME(0): VIAMapMMIO
[   114.227] (--) CHROME(0): mapping MMIO @ 0xc8000000 with size 0x9000
[   114.227] (--) CHROME(0): mapping BitBlt MMIO @ 0xc8200000 with size 0x200000
[   114.228] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[   114.228] (==) CHROME(0): Will not print VGA registers.
[   114.228] (==) CHROME(0): Will not scan I2C buses.
[   114.228] (II) CHROME(0): ...Finished parsing config file options.
[   114.228] (--) CHROME(0): Detected Fujitsu/Siemens Amilo Pro V3515. Card-Ids (1734|10CB)
[   114.228] (II) CHROME(0): Detected MemClk 7
[   114.228] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 7
[   114.228] (II) CHROME(0): Detected TV standard: PAL.
[   114.228] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
[   114.228] (II) Loading sub module "i2c"
[   114.228] (II) LoadModule: "i2c"
[   114.228] (II) Module "i2c" already built-in
[   114.228] (II) CHROME(0): ViaI2CInit
[   114.228] (II) CHROME(0): ViaI2CBus1Init
[   114.228] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
[   114.228] (II) CHROME(0): ViaI2cBus2Init
[   114.228] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
[   114.228] (II) CHROME(0): ViaI2CBus3Init
[   114.228] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
[   114.228] (II) Loading sub module "ddc"
[   114.228] (II) LoadModule: "ddc"
[   114.228] (II) Module "ddc" already built-in
[   114.228] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
[   114.248] (II) CHROME(0): ViaOutputsDetect
[   114.248] (II) CHROME(0): Enabling panel from PCI-subsystem ID information.
[   114.248] (II) CHROME(0): Will not try to detect TV encoder.
[   114.248] (II) CHROME(0): ViaOutputsSelect
[   114.248] (II) CHROME(0): ViaOutputsSelect: X Configuration: 0x00
[   114.248] (II) CHROME(0): ViaOutputsSelect: BIOS Initialised register: 0x07
[   114.248] (II) CHROME(0): ViaOutputsSelect: Panel.
[   114.248] (II) CHROME(0): ViaPanelPreInit
[   114.248] (II) CHROME(0): VIAGetPanelSizeFromDDCv1
[   114.248] (II) CHROME(0): I2C device "I2C bus 2:ddc2" registered at address 0xA0.
[   114.409] (II) CHROME(0): Manufacturer: CPT  Model: 13b0  Serial#: 0
[   114.409] (II) CHROME(0): Year: 2007  Week: 1
[   114.409] (II) CHROME(0): EDID Version: 1.3
[   114.409] (II) CHROME(0): Digital Display Input
[   114.409] (II) CHROME(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[   114.409] (II) CHROME(0): Gamma: 2.20
[   114.409] (II) CHROME(0): No DPMS capabilities specified
[   114.409] (II) CHROME(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   114.409] (II) CHROME(0): First detailed timing is preferred mode
[   114.409] (II) CHROME(0): redX: 0.615 redY: 0.332   greenX: 0.315 greenY: 0.561
[   114.409] (II) CHROME(0): blueX: 0.152 blueY: 0.127   whiteX: 0.315 whiteY: 0.329
[   114.409] (II) CHROME(0): Manufacturer's mask: 0
[   114.409] (II) CHROME(0): Supported detailed timing:
[   114.409] (II) CHROME(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
[   114.409] (II) CHROME(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
[   114.409] (II) CHROME(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
[   114.409] (II) CHROME(0): Unknown vendor-specific block f
[   114.409] (II) CHROME(0):  CPT
[   114.409] (II) CHROME(0):  CLAA154WA05
[   114.409] (II) CHROME(0): EDID (in hex):
[   114.409] (II) CHROME(0): 	00ffffffffffff000e14b01300000000
[   114.409] (II) CHROME(0): 	01110103802115780a8e2d9d55508f27
[   114.409] (II) CHROME(0): 	20505400000001010101010101010101
[   114.409] (II) CHROME(0): 	010101010101ea1a008050200d301820
[   114.409] (II) CHROME(0): 	13004bcf100000190000000f00202020
[   114.409] (II) CHROME(0): 	2020202020206e050f00000000fe0043
[   114.409] (II) CHROME(0): 	50540a202020202020202020000000fe
[   114.409] (II) CHROME(0): 	00434c4141313534574130350a2000fd
[   114.409] (II) CHROME(0): EDID vendor "CPT", prod id 5040
[   114.409] (II) CHROME(0): Printing DDC gathered Modelines:
[   114.409] (II) CHROME(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
[   114.409] (II) CHROME(0): VIAGetPanelSizeFromEDID
[   114.409] (II) CHROME(0): VIAGetPanelSizeFromDDCv1: (1280x800)
[   114.409] (II) CHROME(0): ViaPanelLookUpModeIndex, Width 1280, Height 800, NativeModeIndex7
[   114.409] (II) CHROME(0): ViaPanelGetNativeDisplayMode
[   114.409] (II) CHROME(0): NativeModeIndex: 7
[   114.409] (II) CHROME(0): ViaModesAttach
[   114.409] (II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.lo to 31.640000
[   114.409] (II) CHROME(0): ViaModesMonitorFixup - Adjusted VRefresh.hi to 60.266666
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.lo to 29.677455
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted VRefresh.lo to 59.713188
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted VRefresh.hi to 60.316540
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted VRefresh.lo to 59.233448
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.hi to 53.692763
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted VRefresh.lo to 50.646400
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.hi to 60.155556
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.hi to 64.146919
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted VRefresh.hi to 60.749973
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.hi to 65.279787
[   114.410] (II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.hi to 74.904167
[   114.410] (II) CHROME(0): <default monitor>: Using hsync range of 29.68-74.90 kHz
[   114.410] (II) CHROME(0): <default monitor>: Using vrefresh range of 50.65-60.75 Hz
[   114.410] (II) CHROME(0): Estimated virtual size for aspect ratio 1.5714 is 1280x800
[   114.410] (II) CHROME(0): Clock range:  20.00 to 230.00 MHz
[   114.410] (II) CHROME(0): ViaValidMode: Validating 640x350 (Clock: 31500)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "640x350" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 640x400 (Clock: 31500)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "640x400" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 720x400 (Clock: 35500)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "720x400" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 640x480 (Clock: 25175)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 640x480 (Clock: 31500)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "640x480" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 640x480 (Clock: 31500)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "640x480" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 640x480 (Clock: 36000)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "640x480" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 36000)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 40000)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 50000)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "800x600" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 49500)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "800x600" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 56300)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "800x600" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 1024x768i (Clock: 44900)
[   114.410] (II) CHROME(0): Not using default mode "1024x768i" (interlace mode not supported)
[   114.410] (II) CHROME(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 1024x768 (Clock: 65000)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 1024x768 (Clock: 75000)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "1024x768" (vrefresh out of range)
[   114.410] (II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   114.410] (II) CHROME(0): ViaValidMode: Validating 1024x768 (Clock: 78750)
[   114.410] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.410] (II) CHROME(0): Not using default mode "1024x768" (vrefresh out of range)
[   114.411] (II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): ViaValidMode: Validating 1024x768 (Clock: 94500)
[   114.411] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.411] (II) CHROME(0): Not using default mode "1024x768" (vrefresh out of range)
[   114.411] (II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1280x960" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1280x960" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1280x1024" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1280x1024" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1280x1024" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1600x1200" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1600x1200" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1600x1200" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1600x1200" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1600x1200" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1792x1344" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1792x1344" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1856x1392" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1856x1392" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1920x1440" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1920x1440" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): ViaValidMode: Validating 832x624 (Clock: 57284)
[   114.411] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.411] (II) CHROME(0): Not using default mode "832x624" (vrefresh out of range)
[   114.411] (II) CHROME(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1360x768" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1360x768" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1400x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1400x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1400x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1400x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1440x900" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1600x1024" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1680x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1680x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1680x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1680x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1680x1050" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1920x1080" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1920x1200" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "1920x1440" (width too large for virtual size)
[   114.411] (II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
[   114.411] (II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
[   114.411] (II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
[   114.411] (II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   114.411] (II) CHROME(0): ViaValidMode: Validating 1280x800 (Clock: 68900)
[   114.411] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.411] (II) CHROME(0): ViaValidMode: Validating 640x480 (Clock: 25312)
[   114.411] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.411] (II) CHROME(0): ViaValidMode: Validating 720x480 (Clock: 26591)
[   114.412] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 720x576 (Clock: 32663)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 800x480 (Clock: 40000)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 39822)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 848x480 (Clock: 33750)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 856x480 (Clock: 31704)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1024x512 (Clock: 41164)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1024x576 (Clock: 46981)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1024x600 (Clock: 48960)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1024x768 (Clock: 65028)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): Not using default mode "1152x864" (height too large for virtual size)
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1280x768 (Clock: 81135)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1280x720 (Clock: 74600)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1280x800 (Clock: 83500)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): Not using default mode "1200x900" (height too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1280x960" (height too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1280x1024" (height too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1360x768" (width too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1366x768" (width too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1400x1050" (width too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1440x900" (width too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1600x1200" (width too large for virtual size)
[   114.416] (II) CHROME(0): Not using default mode "1920x1080" (width too large for virtual size)
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1280x800 (Clock: 68900)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1280x800 (Clock: 83500)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1280x768 (Clock: 81135)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.416] (II) CHROME(0): ViaValidMode: Validating 1280x720 (Clock: 74600)
[   114.416] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 1024x768 (Clock: 65028)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 1024x768 (Clock: 65000)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 1024x600 (Clock: 48960)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 1024x576 (Clock: 46981)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 1024x512 (Clock: 41164)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 40000)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 39822)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 800x600 (Clock: 36000)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 720x576 (Clock: 32663)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 856x480 (Clock: 31704)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 848x480 (Clock: 33750)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 800x480 (Clock: 40000)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 720x480 (Clock: 26591)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 640x480 (Clock: 25312)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (II) CHROME(0): ViaValidMode: Validating 640x480 (Clock: 25175)
[   114.417] (II) CHROME(0): ViaSecondCRTCModeValid
[   114.417] (--) CHROME(0): Virtual size is 1280x800 (pitch 1280)
[   114.417] (**) CHROME(0): *Driver mode "1280x800": 68.9 MHz (scaled from -0.0 MHz), 48.9 kHz, 60.2 Hz
[   114.417] (II) CHROME(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
[   114.417] (**) CHROME(0): *Default mode "1280x800": 83.5 MHz (scaled from -0.0 MHz), 49.7 kHz, 59.8 Hz
[   114.417] (II) CHROME(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[   114.417] (**) CHROME(0): *Default mode "1280x768": 81.1 MHz (scaled from 0.0 MHz), 48.1 kHz, 59.9 Hz
[   114.417] (II) CHROME(0): Modeline "1280x768"x59.9   81.14  1280 1328 1440 1688  768 770 776 802 +hsync -vsync (48.1 kHz)
[   114.417] (**) CHROME(0): *Default mode "1280x720": 74.6 MHz (scaled from 0.0 MHz), 44.2 kHz, 59.2 Hz
[   114.417] (II) CHROME(0): Modeline "1280x720"x59.2   74.60  1280 1341 1474 1688  720 721 724 746 -hsync +vsync (44.2 kHz)
[   114.417] (**) CHROME(0): *Default mode "1024x768": 65.0 MHz (scaled from -0.0 MHz), 48.4 kHz, 60.0 Hz
[   114.417] (II) CHROME(0): Modeline "1024x768"x60.0   65.03  1024 1048 1184 1344  768 770 776 806 -hsync -vsync (48.4 kHz)
[   114.417] (**) CHROME(0): *Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[   114.417] (II) CHROME(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   114.417] (**) CHROME(0): *Default mode "1024x600": 49.0 MHz (scaled from 0.0 MHz), 37.3 kHz, 59.2 Hz
[   114.417] (II) CHROME(0): Modeline "1024x600"x59.2   48.96  1024 1048 1152 1312  600 601 604 630 -hsync +vsync (37.3 kHz)
[   114.417] (**) CHROME(0): *Default mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
[   114.417] (II) CHROME(0): Modeline "1024x576"x60.0   46.98  1024 1064 1168 1312  576 576 579 597 -hsync +vsync (35.8 kHz)
[   114.417] (**) CHROME(0): *Default mode "1024x512": 41.2 MHz (scaled from -0.0 MHz), 31.8 kHz, 59.8 Hz
[   114.417] (II) CHROME(0): Modeline "1024x512"x59.8   41.16  1024 1056 1160 1296  512 512 515 531 -hsync +vsync (31.8 kHz)
[   114.417] (**) CHROME(0): *Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   114.417] (II) CHROME(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   114.417] (**) CHROME(0): *Default mode "800x600": 39.8 MHz (scaled from 0.0 MHz), 37.7 kHz, 60.0 Hz
[   114.417] (II) CHROME(0): Modeline "800x600"x60.0   39.82  800 840 968 1056  600 600 604 628 +hsync +vsync (37.7 kHz)
[   114.417] (**) CHROME(0): *Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[   114.417] (II) CHROME(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   114.417] (**) CHROME(0): *Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
[   114.417] (II) CHROME(0): Modeline "720x576"x60.0   32.66  720 744 816 912  576 576 579 597 -hsync +vsync (35.8 kHz)
[   114.417] (**) CHROME(0): *Default mode "856x480": 31.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
[   114.417] (II) CHROME(0): Modeline "856x480"x60.0   31.70  856 872 960 1064  480 480 483 497 -hsync +vsync (29.8 kHz)
[   114.417] (**) CHROME(0): *Default mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[   114.417] (II) CHROME(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 485 493 517 +hsync +vsync (31.0 kHz)
[   114.417] (**) CHROME(0): *Default mode "800x480": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   114.417] (II) CHROME(0): Modeline "800x480"x60.3   40.00  800 832 960 1056  480 541 545 628 -hsync +vsync (37.9 kHz)
[   114.417] (**) CHROME(0): *Default mode "720x480": 26.6 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.7 Hz
[   114.418] (II) CHROME(0): Modeline "720x480"x59.7   26.59  720 736 808 896  480 480 483 497 -hsync +vsync (29.7 kHz)
[   114.418] (**) CHROME(0): *Default mode "640x480": 25.3 MHz (scaled from 0.0 MHz), 31.6 kHz, 60.3 Hz
[   114.418] (II) CHROME(0): Modeline "640x480"x60.3   25.31  640 656 752 800  480 489 491 525 -hsync -vsync (31.6 kHz)
[   114.418] (**) CHROME(0): *Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[   114.418] (II) CHROME(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   114.418] (**) CHROME(0): Display dimensions: (330, 210) mm
[   114.418] (**) CHROME(0): DPI set to (98, 96)
[   114.418] (II) Loading sub module "fb"
[   114.418] (II) LoadModule: "fb"
[   114.428] (II) Loading /usr/lib/xorg/modules/libfb.so
[   114.444] (II) Module fb: vendor="X.Org Foundation"
[   114.444] 	compiled for 1.10.4, module version = 1.0.0
[   114.444] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   114.444] (II) Loading sub module "xaa"
[   114.444] (II) LoadModule: "xaa"
[   114.445] (II) Loading /usr/lib/xorg/modules/libxaa.so
[   114.473] (II) Module xaa: vendor="X.Org Foundation"
[   114.473] 	compiled for 1.10.4, module version = 1.2.1
[   114.473] 	ABI class: X.Org Video Driver, version 10.0
[   114.473] (II) Loading sub module "ramdac"
[   114.473] (II) LoadModule: "ramdac"
[   114.473] (II) Module "ramdac" already built-in
[   114.473] (II) CHROME(0): VIAUnmapMem
[   114.473] (II) UnloadModule: "vesa"
[   114.473] (II) Unloading vesa
[   114.473] (II) UnloadModule: "fbdev"
[   114.473] (II) Unloading fbdev
[   114.473] (II) UnloadModule: "fbdevhw"
[   114.473] (II) Unloading fbdevhw
[   114.473] (--) Depth 24 pixmap format is 32 bpp
[   114.473] (II) CHROME(0): VIAScreenInit
[   114.473] (II) CHROME(0): VIAMapFB
[   114.473] (--) CHROME(0): mapping framebuffer @ 0xa0000000 with size 0x10000000
[   114.506] (--) CHROME(0): Frame buffer start: 0x977df000, free start: 0x3e8000 end: 0x10000000
[   114.506] (II) CHROME(0): VIAMapMMIO
[   114.506] (--) CHROME(0): mapping MMIO @ 0xc8000000 with size 0x9000
[   114.506] (--) CHROME(0): mapping BitBlt MMIO @ 0xc8200000 with size 0x200000
[   114.506] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[   114.506] (II) CHROME(0): VIASave
[   114.506] (II) CHROME(0): Primary
[   114.695] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[   114.695] (II) CHROME(0): Crtc...
[   114.695] (II) CHROME(0): TVSave...
[   114.695] (II) CHROME(0): VIAWriteMode
[   114.695] (II) CHROME(0): ViaModeSet
[   114.695] (II) CHROME(0): Name: 1280x800
[   114.695] (II) CHROME(0): Clock: 68900
[   114.695] (II) CHROME(0): VRefresh: 60.190231
[   114.695] (II) CHROME(0): HSync: 48.934658
[   114.695] (II) CHROME(0): HDisplay: 1280
[   114.695] (II) CHROME(0): HSyncStart: 1304
[   114.695] (II) CHROME(0): HSyncEnd: 1336
[   114.695] (II) CHROME(0): HTotal: 1408
[   114.695] (II) CHROME(0): HSkew: 0
[   114.695] (II) CHROME(0): VDisplay: 800
[   114.695] (II) CHROME(0): VSyncStart: 801
[   114.695] (II) CHROME(0): VSyncEnd: 804
[   114.695] (II) CHROME(0): VTotal: 813
[   114.695] (II) CHROME(0): VScan: 0
[   114.695] (II) CHROME(0): Flags: 10
[   114.695] (II) CHROME(0): CrtcHDisplay: 0x500
[   114.695] (II) CHROME(0): CrtcHBlankStart: 0x500
[   114.695] (II) CHROME(0): CrtcHSyncStart: 0x518
[   114.695] (II) CHROME(0): CrtcHSyncEnd: 0x538
[   114.695] (II) CHROME(0): CrtcHBlankEnd: 0x580
[   114.695] (II) CHROME(0): CrtcHTotal: 0x580
[   114.695] (II) CHROME(0): CrtcHSkew: 0x0
[   114.695] (II) CHROME(0): CrtcVDisplay: 0x320
[   114.695] (II) CHROME(0): CrtcVBlankStart: 0x320
[   114.695] (II) CHROME(0): CrtcVSyncStart: 0x321
[   114.695] (II) CHROME(0): CrtcVSyncEnd: 0x324
[   114.695] (II) CHROME(0): CrtcVBlankEnd: 0x32d
[   114.695] (II) CHROME(0): CrtcVTotal: 0x32d
[   114.695] (II) CHROME(0): ViaModeSecondCRTC
[   114.695] (II) CHROME(0): ViaPanelScale: 1280,800 -> 1280,800
[   114.695] (II) CHROME(0): mode: 0x9f1ed08
[   114.695] (II) CHROME(0): mode->name: 0x9f21668
[   114.695] (II) CHROME(0): mode->name: 1280x800
[   114.695] (II) CHROME(0): ViaSecondCRTCSetMode
[   114.695] (II) CHROME(0): Setting up 1280x800
[   114.695] (II) CHROME(0): ViaSetSecondaryFIFO
[   114.696] (II) CHROME(0): ViaSetDotclock to 0x04d04d
[   114.696] (II) CHROME(0): ViaSetUseExternalClock
[   114.696] (II) CHROME(0): ViaSecondDisplayChannelEnable
[   114.696] (II) CHROME(0): ViaDisplayDisableCRT
[   114.696] (II) CHROME(0): ViaDisplayDisableSimultaneous
[   114.696] (II) CHROME(0): VIAAdjustFrame 0x0
[   114.696] (II) CHROME(0): VIAAdjustFrame 0x0
[   114.696] (II) CHROME(0): - Blanked
[   114.696] drmOpenDevice: node name is /dev/dri/card0
[   114.730] drmOpenDevice: node name is /dev/dri/card0
[   115.190] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[   115.190] drmOpenDevice: node name is /dev/dri/card0
[   115.203] drmOpenByBusid: drmOpenMinor returns -1
[   115.203] drmOpenDevice: node name is /dev/dri/card1
[   115.207] drmOpenByBusid: drmOpenMinor returns -1
[   115.207] drmOpenDevice: node name is /dev/dri/card2
[   115.211] drmOpenByBusid: drmOpenMinor returns -1
[   115.211] drmOpenDevice: node name is /dev/dri/card3
[   115.216] drmOpenByBusid: drmOpenMinor returns -1
[   115.216] drmOpenDevice: node name is /dev/dri/card4
[   115.220] drmOpenByBusid: drmOpenMinor returns -1
[   115.220] drmOpenDevice: node name is /dev/dri/card5
[   115.225] drmOpenByBusid: drmOpenMinor returns -1
[   115.225] drmOpenDevice: node name is /dev/dri/card6
[   115.232] drmOpenByBusid: drmOpenMinor returns -1
[   115.232] drmOpenDevice: node name is /dev/dri/card7
[   115.236] drmOpenByBusid: drmOpenMinor returns -1
[   115.237] drmOpenDevice: node name is /dev/dri/card8
[   115.241] drmOpenByBusid: drmOpenMinor returns -1
[   115.241] drmOpenDevice: node name is /dev/dri/card9
[   115.245] drmOpenByBusid: drmOpenMinor returns -1
[   115.245] drmOpenDevice: node name is /dev/dri/card10
[   115.255] drmOpenByBusid: drmOpenMinor returns -1
[   115.255] drmOpenDevice: node name is /dev/dri/card11
[   115.260] drmOpenByBusid: drmOpenMinor returns -1
[   115.260] drmOpenDevice: node name is /dev/dri/card12
[   115.264] drmOpenByBusid: drmOpenMinor returns -1
[   115.264] drmOpenDevice: node name is /dev/dri/card13
[   115.278] drmOpenByBusid: drmOpenMinor returns -1
[   115.279] drmOpenDevice: node name is /dev/dri/card14
[   115.283] drmOpenByBusid: drmOpenMinor returns -1
[   115.283] drmOpenDevice: node name is /dev/dri/card15
[   115.287] drmOpenByBusid: drmOpenMinor returns -1
[   115.287] drmOpenDevice: node name is /dev/dri/card0
[   115.562] drmOpenDevice: node name is /dev/dri/card0
[   115.578] drmOpenDevice: node name is /dev/dri/card1
[   115.583] drmOpenDevice: node name is /dev/dri/card2
[   115.588] drmOpenDevice: node name is /dev/dri/card3
[   115.596] drmOpenDevice: node name is /dev/dri/card4
[   115.601] drmOpenDevice: node name is /dev/dri/card5
[   115.606] drmOpenDevice: node name is /dev/dri/card6
[   115.611] drmOpenDevice: node name is /dev/dri/card7
[   115.616] drmOpenDevice: node name is /dev/dri/card8
[   115.622] drmOpenDevice: node name is /dev/dri/card9
[   115.626] drmOpenDevice: node name is /dev/dri/card10
[   115.631] drmOpenDevice: node name is /dev/dri/card11
[   115.635] drmOpenDevice: node name is /dev/dri/card12
[   115.640] drmOpenDevice: node name is /dev/dri/card13
[   115.645] drmOpenDevice: node name is /dev/dri/card14
[   115.649] drmOpenDevice: node name is /dev/dri/card15
[   115.654] (EE) [drm] drmOpen failed.
[   115.654] (EE) CHROME(0): [dri] DRIScreenInit failed.  Disabling DRI.
[   115.654] (II) CHROME(0): - Visuals set up
[   115.654] (II) CHROME(0): VIAInternalScreenInit
[   115.654] (II) CHROME(0): - B & W
[   115.661] (II) CHROME(0): CursorStart: 0xffc0000
[   115.661] (II) CHROME(0): Frame Buffer From (0,0) To (1280,3200)
[   115.661] (II) CHROME(0): Using 2400 lines for offscreen memory.
[   115.661] (II) CHROME(0): Using XFree86 Acceleration Architecture (XAA)
[   115.661] 	Screen to screen bit blits
[   115.661] 	Solid filled rectangles
[   115.661] 	8x8 mono pattern filled rectangles
[   115.661] 	8x8 color pattern filled rectangles
[   115.662] 	Solid Lines
[   115.662] 	Dashed Lines
[   115.662] 	Image Writes
[   115.662] 	Setting up tile and stipple cache:
[   115.662] 		32 128x128 slots
[   115.662] 		17 256x256 slots
[   115.662] 		5 512x512 slots
[   115.662] 		32 8x8 color pattern slots
[   115.662] (==) CHROME(0): Backing store disabled
[   115.662] (II) CHROME(0): - Backing store set up
[   115.662] (II) CHROME(0): - SW cursor set up
[   115.662] (II) CHROME(0): VIAHWCursorInit
[   115.662] (II) CHROME(0): HWCursor ARGB enabled
[   115.662] (II) CHROME(0): - Def Color map set up
[   115.662] (II) CHROME(0): VIALoadPalette: numColors: 256
[   115.662] (II) CHROME(0): VIALoadRgbLut
[   115.662] (II) CHROME(0): - Palette loaded
[   115.663] (==) CHROME(0): DPMS enabled
[   115.663] (II) CHROME(0): - DPMS set up
[   115.663] (II) CHROME(0): - Color maps etc. set up
[   115.663] (II) CHROME(0): direct rendering disabled
[   115.673] (II) CHROME(0): Benchmarking video copy.  Less time is better.
[   115.678] (--) CHROME(0): Timed   libc YUV420 copy... 2312700. Throughput: 410.4 MiB/s.
[   115.695] (--) CHROME(0): Timed kernel YUV420 copy... 2362836. Throughput: 401.7 MiB/s.
[   115.698] (--) CHROME(0): Timed    SSE YUV420 copy... 1338948. Throughput: 708.9 MiB/s.
[   115.712] (--) CHROME(0): Timed    MMX YUV420 copy... 1408152. Throughput: 674.1 MiB/s.
[   115.712] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[   115.715] (--) CHROME(0): Timed   MMX2 YUV420 copy... 1477296. Throughput: 642.5 MiB/s.
[   115.715] Freed 16389120 (pool 1)
[   115.715] (--) CHROME(0): Using SSE YUV42X copy for video.
[   115.715] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
[   115.715] (II) CHROME(0): - Done
[   115.715] (==) RandR enabled
[   115.715] (II) Initializing built-in extension Generic Event Extension
[   115.715] (II) Initializing built-in extension SHAPE
[   115.715] (II) Initializing built-in extension MIT-SHM
[   115.715] (II) Initializing built-in extension XInputExtension
[   115.715] (II) Initializing built-in extension XTEST
[   115.715] (II) Initializing built-in extension BIG-REQUESTS
[   115.715] (II) Initializing built-in extension SYNC
[   115.715] (II) Initializing built-in extension XKEYBOARD
[   115.715] (II) Initializing built-in extension XC-MISC
[   115.715] (II) Initializing built-in extension SECURITY
[   115.715] (II) Initializing built-in extension XINERAMA
[   115.715] (II) Initializing built-in extension XFIXES
[   115.715] (II) Initializing built-in extension RENDER
[   115.715] (II) Initializing built-in extension RANDR
[   115.715] (II) Initializing built-in extension COMPOSITE
[   115.715] (II) Initializing built-in extension DAMAGE
[   115.715] (II) Initializing built-in extension GESTURE
[   115.757] (II) AIGLX: Screen 0 is not DRI2 capable
[   115.757] (II) AIGLX: Screen 0 is not DRI capable
[   115.757] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/swrast_dri.so
[   116.478] (II) AIGLX: Loaded and initialized swrast
[   116.478] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   117.029] (II) XKB: generating xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   118.416] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   118.416] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   118.416] (II) LoadModule: "evdev"
[   118.417] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   118.881] (II) Module evdev: vendor="X.Org Foundation"
[   118.881] 	compiled for 1.10.2, module version = 2.6.0
[   118.881] 	Module class: X.Org XInput Driver
[   118.881] 	ABI class: X.Org XInput driver, version 12.3
[   118.881] (II) Using input driver 'evdev' for 'Power Button'
[   118.881] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   118.881] (**) Power Button: always reports core events
[   118.881] (**) Power Button: Device: "/dev/input/event2"
[   118.882] (--) Power Button: Found keys
[   118.882] (II) Power Button: Configuring as keyboard
[   118.882] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   118.882] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   118.882] (**) Option "xkb_rules" "evdev"
[   118.882] (**) Option "xkb_model" "pc105"
[   118.882] (**) Option "xkb_layout" "fr"
[   118.882] (**) Option "xkb_variant" "oss"
[   118.882] (**) Option "xkb_options" "lv3:ralt_switch"
[   118.886] (II) XKB: generating xkmfile /var/lib/xkb/server-C1506138F50CF89DB638A35A165AFC7B98F302CF.xkm
[   118.979] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   118.979] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   118.979] (II) Using input driver 'evdev' for 'Video Bus'
[   118.979] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   118.979] (**) Video Bus: always reports core events
[   118.979] (**) Video Bus: Device: "/dev/input/event4"
[   118.979] (--) Video Bus: Found keys
[   118.979] (II) Video Bus: Configuring as keyboard
[   118.979] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/LNXVIDEO:00/input/input4/event4"
[   118.979] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   118.979] (**) Option "xkb_rules" "evdev"
[   118.979] (**) Option "xkb_model" "pc105"
[   118.979] (**) Option "xkb_layout" "fr"
[   118.979] (**) Option "xkb_variant" "oss"
[   118.979] (**) Option "xkb_options" "lv3:ralt_switch"
[   118.984] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   118.984] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   118.984] (II) Using input driver 'evdev' for 'Power Button'
[   118.984] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   118.984] (**) Power Button: always reports core events
[   118.984] (**) Power Button: Device: "/dev/input/event0"
[   118.984] (--) Power Button: Found keys
[   118.984] (II) Power Button: Configuring as keyboard
[   118.984] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[   118.984] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   118.984] (**) Option "xkb_rules" "evdev"
[   118.984] (**) Option "xkb_model" "pc105"
[   118.984] (**) Option "xkb_layout" "fr"
[   118.984] (**) Option "xkb_variant" "oss"
[   118.984] (**) Option "xkb_options" "lv3:ralt_switch"
[   118.985] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   118.985] (II) No input driver/identifier specified (ignoring)
[   118.994] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   118.994] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   118.995] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   118.995] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   118.995] (**) AT Translated Set 2 keyboard: always reports core events
[   118.995] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[   118.995] (--) AT Translated Set 2 keyboard: Found keys
[   118.995] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   118.995] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   118.995] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   118.995] (**) Option "xkb_rules" "evdev"
[   118.995] (**) Option "xkb_model" "pc105"
[   118.995] (**) Option "xkb_layout" "fr"
[   118.995] (**) Option "xkb_variant" "oss"
[   118.995] (**) Option "xkb_options" "lv3:ralt_switch"
[   118.996] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
[   118.996] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[   118.996] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[   118.996] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   118.996] (**) PS/2 Mouse: always reports core events
[   118.996] (**) PS/2 Mouse: Device: "/dev/input/event5"
[   118.996] (--) PS/2 Mouse: Found 3 mouse buttons
[   118.996] (--) PS/2 Mouse: Found relative axes
[   118.996] (--) PS/2 Mouse: Found x and y relative axes
[   118.996] (II) PS/2 Mouse: Configuring as mouse
[   118.996] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[   118.996] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   118.996] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input5/event5"
[   118.996] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[   118.996] (II) PS/2 Mouse: initialized for relative axes.
[   118.997] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[   118.997] (**) PS/2 Mouse: (accel) acceleration profile 0
[   118.997] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[   118.997] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[   118.997] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[   118.997] (II) No input driver/identifier specified (ignoring)
[   118.998] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[   118.998] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[   118.998] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[   118.998] (II) LoadModule: "synaptics"
[   118.998] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   119.108] (II) Module synaptics: vendor="X.Org Foundation"
[   119.108] 	compiled for 1.10.4, module version = 1.4.1
[   119.108] 	Module class: X.Org XInput Driver
[   119.108] 	ABI class: X.Org XInput driver, version 12.3
[   119.108] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[   119.109] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   119.109] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[   119.109] (**) Option "Device" "/dev/input/event6"
[   119.109] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[   119.109] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[   119.109] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[   119.109] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[   119.109] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 16
[   119.116] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[   119.116] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[   119.116] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[   119.116] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[   119.116] (II) AlpsPS/2 ALPS GlidePoint: failed to open grail, no gesture support
[   119.116] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[   119.117] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[   119.117] (II) No input driver/identifier specified (ignoring)
[   124.603] (II) CHROME(0): ViaLVDSPower 1
[   124.603] (II) CHROME(0): ViaLCDPower: On.

D'après ce que je lis, Xubuntu essaye d'abord d'utiliser openchrome [113.518] mais échoue [114.093] et se rabat sur vesa, comme j'ai dû faire avec Arch, sauf qu'ici la résolution est correcte. Je note la présence du sous-module "vgahw", que je n'avais pas vu avec Arch mais sans certitude. Est-ce que c'est ça qui fait la différence ?

Je note aussi que les modules "vesa", "fbdev" et "fbdevhw" (mais pas "vgahw") sont ensuite déchargés [114.473] et je ne comprends pas pourquoi.

Si un linuxien plus chevronné peut me donner quelques éclaircissements, je lui en serait bien reconnaissant.

Cordialement,
LuX

LuX a écrit :D'après ce que je lis, Xubuntu essaye d'abord d'utiliser openchrome [113.518] mais échoue [114.093] et se rabat sur vesa, comme j'ai dû faire avec Arch, sauf qu'ici la résolution est correcte.

Non, il réussit au contraire (en témoignent les lignes CHROME par la suite et ce pourquoi les autres modules sont déchargés ensuite). C'est juste un avertissement comme quoi le pilote ne sort pas de chez VIA.

LuX a écrit :1) J'ai essayé un par un les drivers openchrome, unichrome, unichrome-dri (avec libgl) plantage à chaque fois.

Il faudrait les logs complets de X avec xf86-video-openchrome ou xf86-video-unichrome, sans autre fichier de configuration que ceux de base. Sachant que tu es contraint de repasser à une version 1.10 de xorg apparemment (trouvable sur AUR au moins).

Bonjour FoolEcho

Je ne peux pas fournir les fichiers de log avec ces drivers : ça plante à chaque fois au démarrage, je n'ai même pas accès aux tty.
Avec Xubuntu j'ai d'ailleurs un effet très bizarre à la fin du démarrage, juste avant d'afficher le gestionnaire de connexion : l'écran affiché jusque là avec le machin qui va-et vient pndant le démarrage est soudain reproduit en beaucoup plus petit et en deux exemplaires, à peu près sur un quart d'écran, en haut à gauche et en haut à droite, tandis que le reste est noir rayé de blanc. Ça dure une petite seconde puis le gestionnaire de connexion s'affiche normalement. Avec Arch, il me semble que c'est au même moment que le plantage se produit.

Cordialement,

LuX a écrit :Je ne peux pas fournir les fichiers de log avec ces drivers : ça plante à chaque fois au démarrage, je n'ai même pas accès aux tty.

Tu dois les avoir quand même, regarde par rapport aux dates (tu devrais avoir des Xorg.1.log ou des .old).

Ah, OK ! Je vais regarder ça. Pour le moment je ne peux plus car je n'ai plus la machine en question, mais j'y reviendrai.
En attendant, merci.

Au faut, pourquoi est-ce que je serais contraint de repasser par la version 1.10 de Xorg ?

LuX a écrit :Au faut, pourquoi est-ce que je serais contraint de repasser par la version 1.10 de Xorg ?

En fait non, j'ai mal vu.

Bonjour

Je reviens sur mon problème de driver, qui s'est aggravé méchamment.

En effet, avant de faire la manip' proposée par FoolEcho (installation de openchrome, comme Xubuntu, et récupération des fichiers de log après plantage au redémarrage) j'ai voulu mettre mon système à jour, ce que je n'avais plus fait depuis un moment. La mise à jour s'est passée sans erreur et je n'ai rien installé de nouveau mais au redémarrage... plantage du boot après l'affichage de :

Code : Tout sélectionner

Sun Oct 21 14:25:56 2012: :: Waiting for udev uevents to be processed    [BUSY]

Quelques lignes de pixels blanches ou bleues apparaissent et l'écran gèle, puis blanchit progressivement en partant du coin inférieur droit.

Je suis sur Xubuntu, et je découvre en lisant le /var/log/boot de la partition de Arch qu'en fait le boot s'est poursuivi jusqu'au bout et que le problème est uniquement graphique apparemment. En voici la fin (les premières lignes ci-dessous sont les dernières du précédent démarrage, la date et l'heure parlent d'elles-même) :

Code : Tout sélectionner

Sun Oct 21 14:21:23 2012: :: Starting Simple Login Manager    [BUSY]    [DONE] 
Sun Oct 21 14:21:23 2012: *** Scripts perso : /etc/rc.local
Sun Oct 21 14:21:23 2012: 1 : Suppression du biiiiip dans les tty
Sun Oct 21 14:21:23 2012: Sun Oct 21 14:25:56 2012: :: Setting hostname: isis    [BUSY]    [DONE] 
Sun Oct 21 14:25:56 2012:  HARDWARECLOCK= is deprecated. See rc.conf(5) and hwclock(8) for details. 
Sun Oct 21 14:25:56 2012: :: Adjusting system time and setting kernel time zone    [BUSY]  TIMEZONE= is deprecated. See rc.conf(5) for details. 
Sun Oct 21 14:25:56 2012:    [DONE] 
Sun Oct 21 14:25:56 2012: :: Starting udev daemon    [BUSY]    [DONE] 
Sun Oct 21 14:25:56 2012: :: Triggering udev uevents    [BUSY]    [DONE] 
Sun Oct 21 14:25:56 2012: :: Loading user-specified modules    [BUSY]    [DONE] 
Sun Oct 21 14:25:56 2012: :: Waiting for udev uevents to be processed    [BUSY]    [DONE] 
Sun Oct 21 14:25:56 2012: :: Configuring virtual consoles    [BUSY] %G   [DONE] 
Sun Oct 21 14:25:56 2012: :: Bringing up loopback interface    [BUSY]    [DONE] 
Sun Oct 21 14:25:56 2012: :: Checking filesystems    [BUSY] /dev/sdb3Â : rÃ©cupÃ©ration du journal
Sun Oct 21 14:25:56 2012: /dev/sdb3Â : propre, 16423/566352 fichiers, 483061/2260992 blocs
Sun Oct 21 14:25:56 2012:    [DONE] 
Sun Oct 21 14:25:56 2012: :: Remounting root and API filesystems    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Mounting local filesystems    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Activating swap    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Configuring time zone    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Initializing random seed    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Removing leftover files    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Saving dmesg log    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: INIT: Entering runlevel: 3
Sun Oct 21 14:25:57 2012: :: Starting Syslog-NG    [BUSY] Error binding socket; addr='AF_UNIX(/run/systemd/journal/syslog)', error='No such file or directory (2)'
Sun Oct 21 14:25:57 2012: Error initializing source driver; source='src', id='src#0'
Sun Oct 21 14:25:57 2012: Error initializing message pipeline;
Sun Oct 21 14:25:57 2012:    [FAIL] 
Sun Oct 21 14:25:57 2012: :: Starting crond daemon    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Starting D-BUS system messagebus    [BUSY]    [DONE] 
Sun Oct 21 14:25:57 2012: :: Starting net-profiles    [BKGD] 
Sun Oct 21 14:25:57 2012: :: Starting ntpd    [BKGD] 
Sun Oct 21 14:25:57 2012: :: Starting Simple Login Manager    [BUSY]    [DONE] 
Sun Oct 21 14:25:58 2012: *** Scripts perso : /etc/rc.local
Sun Oct 21 14:25:58 2012: 1 : Suppression du biiiiip dans les tty
Sun Oct 21 14:25:58 2012:

Je vais recopier les /var/log/Xorg.0.log dans les messages suivants, en espérant que quelqu'un pourra me guider.

Cordialement,

Le fichier Xorg.0.log. Je note un problème de module "modesetting", mais je ne sais pas comment le résoudre maintenant je ne peux plus démarrer. Et puis est-ce vraiment là ce qui fait le plantage ?

Code : Tout sélectionner

[    19.369] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    19.369] X Protocol Version 11, Revision 0
[    19.369] Build Operating System: Linux 3.6.2-1-ARCH i686 
[    19.369] Current Operating System: Linux isis 3.6.2-1-ARCH #1 SMP PREEMPT Sat Oct 13 07:19:40 CEST 2012 i686
[    19.369] Kernel command line: root=/dev/disk/by-uuid/aca6fbe5-fa73-448b-860f-aff62b18bb4b vga=791 ro acpi_osi=Linux
[    19.369] Build Date: 19 October 2012  03:58:01PM
[    19.369]  
[    19.369] Current version of pixman: 0.26.2
[    19.369] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    19.369] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.369] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 21 14:25:58 2012
[    19.380] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    19.383] (==) No Layout section.  Using the first Screen section.
[    19.383] (==) No screen section available. Using defaults.
[    19.383] (**) |-->Screen "Default Screen Section" (0)
[    19.383] (**) |   |-->Monitor "<default monitor>"
[    19.387] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    19.387] (==) Automatically adding devices
[    19.387] (==) Automatically enabling devices
[    19.387] (==) Automatically adding GPU devices
[    19.407] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    19.407] 	Entry deleted from font path.
[    19.408] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    19.408] 	Entry deleted from font path.
[    19.408] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    19.409] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    19.409] 	Entry deleted from font path.
[    19.409] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    19.409] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    19.409] (==) ModulePath set to "/usr/lib/xorg/modules"
[    19.409] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.410] (II) Loader magic: 0x825a620
[    19.410] (II) Module ABI versions:
[    19.410] 	X.Org ANSI C Emulation: 0.4
[    19.410] 	X.Org Video Driver: 13.0
[    19.410] 	X.Org XInput driver : 18.0
[    19.410] 	X.Org Server Extension : 7.0
[    19.414] (--) PCI:*(0:1:0:0) 1106:3371:1734:10cb rev 1, Mem @ 0xa0000000/536870912, 0xc8000000/16777216
[    19.415] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    19.416] Initializing built-in extension Generic Event Extension
[    19.416] Initializing built-in extension SHAPE
[    19.416] Initializing built-in extension MIT-SHM
[    19.416] Initializing built-in extension XInputExtension
[    19.416] Initializing built-in extension XTEST
[    19.416] Initializing built-in extension BIG-REQUESTS
[    19.416] Initializing built-in extension SYNC
[    19.416] Initializing built-in extension XKEYBOARD
[    19.416] Initializing built-in extension XC-MISC
[    19.416] Initializing built-in extension SECURITY
[    19.416] Initializing built-in extension XINERAMA
[    19.416] Initializing built-in extension XFIXES
[    19.416] Initializing built-in extension RENDER
[    19.417] Initializing built-in extension RANDR
[    19.417] Initializing built-in extension COMPOSITE
[    19.417] Initializing built-in extension DAMAGE
[    19.417] Initializing built-in extension MIT-SCREEN-SAVER
[    19.417] Initializing built-in extension DOUBLE-BUFFER
[    19.417] Initializing built-in extension RECORD
[    19.417] Initializing built-in extension DPMS
[    19.417] Initializing built-in extension X-Resource
[    19.417] Initializing built-in extension XVideo
[    19.417] Initializing built-in extension XVideo-MotionCompensation
[    19.417] Initializing built-in extension XFree86-VidModeExtension
[    19.417] Initializing built-in extension XFree86-DGA
[    19.417] Initializing built-in extension XFree86-DRI
[    19.417] Initializing built-in extension DRI2
[    19.417] (II) LoadModule: "glx"
[    19.419] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.438] (II) Module glx: vendor="X.Org Foundation"
[    19.438] 	compiled for 1.13.0, module version = 1.0.0
[    19.438] 	ABI class: X.Org Server Extension, version 7.0
[    19.438] (==) AIGLX enabled
[    19.439] Loading extension GLX
[    19.439] (==) Matched openchrome as autoconfigured driver 0
[    19.439] (==) Matched vesa as autoconfigured driver 1
[    19.439] (==) Matched modesetting as autoconfigured driver 2
[    19.439] (==) Matched fbdev as autoconfigured driver 3
[    19.439] (==) Assigned the driver to the xf86ConfigLayout
[    19.439] (II) LoadModule: "openchrome"
[    19.458] (WW) Warning, couldn't open module openchrome
[    19.458] (II) UnloadModule: "openchrome"
[    19.458] (II) Unloading openchrome
[    19.458] (EE) Failed to load module "openchrome" (module does not exist, 0)
[    19.458] (II) LoadModule: "vesa"
[    19.459] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    19.461] (II) Module vesa: vendor="X.Org Foundation"
[    19.461] 	compiled for 1.13.0, module version = 2.3.2
[    19.461] 	Module class: X.Org Video Driver
[    19.461] 	ABI class: X.Org Video Driver, version 13.0
[    19.461] (II) LoadModule: "modesetting"
[    19.462] (WW) Warning, couldn't open module modesetting
[    19.462] (II) UnloadModule: "modesetting"
[    19.462] (II) Unloading modesetting
[    19.462] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    19.462] (II) LoadModule: "fbdev"
[    19.462] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    19.464] (II) Module fbdev: vendor="X.Org Foundation"
[    19.464] 	compiled for 1.13.0, module version = 0.4.3
[    19.464] 	Module class: X.Org Video Driver
[    19.464] 	ABI class: X.Org Video Driver, version 13.0
[    19.464] (II) VESA: driver for VESA chipsets: vesa
[    19.464] (II) FBDEV: driver for framebuffer: fbdev
[    19.464] (++) using VT number 7

[    19.479] (WW) Falling back to old probe method for fbdev
[    19.479] (II) Loading sub module "fbdevhw"
[    19.479] (II) LoadModule: "fbdevhw"
[    19.480] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    19.487] (II) Module fbdevhw: vendor="X.Org Foundation"
[    19.487] 	compiled for 1.13.0, module version = 0.0.2
[    19.487] 	ABI class: X.Org Video Driver, version 13.0
[    19.488] (II) Loading sub module "vbe"
[    19.488] (II) LoadModule: "vbe"
[    19.488] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    19.490] (II) Module vbe: vendor="X.Org Foundation"
[    19.490] 	compiled for 1.13.0, module version = 1.1.0
[    19.490] 	ABI class: X.Org Video Driver, version 13.0
[    19.490] (II) Loading sub module "int10"
[    19.490] (II) LoadModule: "int10"
[    19.490] (II) Loading /usr/lib/xorg/modules/libint10.so
[    19.494] (II) Module int10: vendor="X.Org Foundation"
[    19.494] 	compiled for 1.13.0, module version = 1.0.0
[    19.494] 	ABI class: X.Org Video Driver, version 13.0
[    19.495] (II) VESA(0): initializing int10
[    19.504] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[    19.504] (II) VESA(0): VESA BIOS detected
[    19.504] (II) VESA(0): VESA VBE Version 3.0
[    19.504] (II) VESA(0): VESA VBE Total Mem: 262144 kB
[    19.505] (II) VESA(0): VESA VBE OEM: VIA N3364

[    19.505] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[    19.505] (II) VESA(0): VESA VBE OEM Vendor: 
[    19.505] (II) VESA(0): VESA VBE OEM Product: 
[    19.505] (II) VESA(0): VESA VBE OEM Product Rev: 
[    19.550] (II) VESA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    19.550] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[    19.550] (==) VESA(0): RGB weight 888
[    19.550] (==) VESA(0): Default visual is TrueColor
[    19.550] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[    19.550] (II) Loading sub module "ddc"
[    19.550] (II) LoadModule: "ddc"
[    19.550] (II) Module "ddc" already built-in
[    19.550] (II) VESA(0): VESA VBE DDC supported
[    19.550] (II) VESA(0): VESA VBE DDC Level 2
[    19.550] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[    19.920] (II) VESA(0): VESA VBE DDC read failed
[    19.920] (II) VESA(0): Searching for matching VESA mode(s):
[    19.921] Mode: 101 (640x480)
[    19.921] 	ModeAttributes: 0x9f
[    19.921] 	WinAAttributes: 0x7
[    19.921] 	WinBAttributes: 0x0
[    19.921] 	WinGranularity: 64
[    19.921] 	WinSize: 64
[    19.921] 	WinASegment: 0xa000
[    19.921] 	WinBSegment: 0xa000
[    19.921] 	WinFuncPtr: 0xc000ad95
[    19.921] 	BytesPerScanline: 640
[    19.921] 	XResolution: 640
[    19.921] 	YResolution: 480
[    19.921] 	XCharSize: 8
[    19.921] 	YCharSize: 16
[    19.921] 	NumberOfPlanes: 1
[    19.921] 	BitsPerPixel: 8
[    19.921] 	NumberOfBanks: 1
[    19.921] 	MemoryModel: 4
[    19.921] 	BankSize: 0
[    19.921] 	NumberOfImages: 254
[    19.921] 	RedMaskSize: 0
[    19.921] 	RedFieldPosition: 0
[    19.921] 	GreenMaskSize: 0
[    19.921] 	GreenFieldPosition: 0
[    19.921] 	BlueMaskSize: 0
[    19.921] 	BlueFieldPosition: 0
[    19.921] 	RsvdMaskSize: 0
[    19.921] 	RsvdFieldPosition: 0
[    19.921] 	DirectColorModeInfo: 2
[    19.921] 	PhysBasePtr: 0xa0000000
[    19.921] 	LinBytesPerScanLine: 640
[    19.921] 	BnkNumberOfImagePages: 254
[    19.921] 	LinNumberOfImagePages: 254
[    19.921] 	LinRedMaskSize: 0
[    19.921] 	LinRedFieldPosition: 0
[    19.921] 	LinGreenMaskSize: 0
[    19.921] 	LinGreenFieldPosition: 0
[    19.921] 	LinBlueMaskSize: 0
[    19.921] 	LinBlueFieldPosition: 0
[    19.921] 	LinRsvdMaskSize: 0
[    19.922] 	LinRsvdFieldPosition: 0
[    19.922] 	MaxPixelClock: 0
[    19.923] Mode: 111 (640x480)
[    19.923] 	ModeAttributes: 0x9b
[    19.923] 	WinAAttributes: 0x7
[    19.923] 	WinBAttributes: 0x0

*** des dizaines et des dizaines de lignes de ce type, jusqu' à ce qui suit ***

[    19.985] 	LinGreenFieldPosition: 8
[    19.985] 	LinBlueMaskSize: 8
[    19.985] 	LinBlueFieldPosition: 0
[    19.985] 	LinRsvdMaskSize: 0
[    19.985] 	LinRsvdFieldPosition: 0
[    19.985] 	MaxPixelClock: 0
[    19.985] 
[    19.985] (II) VESA(0): Total Memory: 4096 64KB banks (262144kB)
[    19.985] (II) VESA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[    19.985] (II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[    19.985] (II) VESA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[    19.985] (WW) VESA(0): Unable to estimate virtual size
[    19.985] (II) VESA(0): Not using built-in mode "1920x1080" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "1400x1050" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "1280x800" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "1280x768" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "1280x720" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "720x576" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "720x540" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "720x480" (no mode of this name)
[    19.985] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[    19.985] (WW) VESA(0): No valid modes left. Trying less strict filter...
[    19.985] (II) VESA(0): <default monitor>: Using hsync range of 31.50-48.00 kHz
[    19.985] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-70.00 Hz
[    19.985] (II) VESA(0): <default monitor>: Using maximum pixel clock of 65.00 MHz
[    19.985] (WW) VESA(0): Unable to estimate virtual size
[    19.985] (II) VESA(0): Not using built-in mode "1920x1080" (hsync out of range)
[    19.985] (II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
[    19.985] (II) VESA(0): Not using built-in mode "1400x1050" (hsync out of range)
[    19.986] (II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
[    19.986] (II) VESA(0): Not using built-in mode "1280x800" (hsync out of range)
[    19.986] (II) VESA(0): Not using built-in mode "1280x768" (hsync out of range)
[    19.986] (--) VESA(0): Virtual size is 1280x768 (pitch 1280)
[    19.986] (**) VESA(0): *Built-in mode "1280x720"
[    19.986] (**) VESA(0): *Built-in mode "1024x768"
[    19.986] (**) VESA(0): *Built-in mode "800x600"
[    19.986] (**) VESA(0): *Built-in mode "720x576"
[    19.986] (**) VESA(0): *Built-in mode "720x540"
[    19.986] (**) VESA(0): *Built-in mode "720x480"
[    19.986] (**) VESA(0): *Built-in mode "640x480"
[    19.986] (==) VESA(0): DPI set to (96, 96)
[    19.986] (II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (118)
[    19.986] (II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
[    19.987] (II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
[    19.987] (**) VESA(0): Using "Shadow Framebuffer"
[    19.987] (II) Loading sub module "shadow"
[    19.987] (II) LoadModule: "shadow"
[    19.987] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    19.989] (II) Module shadow: vendor="X.Org Foundation"
[    19.989] 	compiled for 1.13.0, module version = 1.1.0
[    19.989] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    19.989] (II) Loading sub module "fb"
[    19.989] (II) LoadModule: "fb"
[    19.989] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.996] (II) Module fb: vendor="X.Org Foundation"
[    19.996] 	compiled for 1.13.0, module version = 1.0.0
[    19.996] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    19.996] (II) UnloadModule: "fbdev"
[    19.996] (II) Unloading fbdev
[    19.996] (II) UnloadSubModule: "fbdevhw"
[    19.996] (II) Unloading fbdevhw
[    19.996] (==) Depth 24 pixmap format is 32 bpp
[    19.996] (II) Loading sub module "int10"
[    19.996] (II) LoadModule: "int10"
[    19.997] (II) Loading /usr/lib/xorg/modules/libint10.so
[    19.997] (II) Module int10: vendor="X.Org Foundation"
[    19.997] 	compiled for 1.13.0, module version = 1.0.0
[    19.997] 	ABI class: X.Org Video Driver, version 13.0
[    19.997] (II) VESA(0): initializing int10
[    20.002] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[    20.003] (II) VESA(0): VESA BIOS detected
[    20.003] (II) VESA(0): VESA VBE Version 3.0
[    20.003] (II) VESA(0): VESA VBE Total Mem: 262144 kB
[    20.003] (II) VESA(0): VESA VBE OEM: VIA N3364

[    20.003] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[    20.003] (II) VESA(0): VESA VBE OEM Vendor: 
[    20.003] (II) VESA(0): VESA VBE OEM Product: 
[    20.003] (II) VESA(0): VESA VBE OEM Product Rev: 
[    20.013] (II) VESA(0): virtual address = 0x97040000,
	physical address = 0xa0000000, size = 268435456
[    32.883] (II) VESA(0): Setting up VESA Mode 0x127 (1280x720)
[    33.427] (==) VESA(0): Default visual is TrueColor
[    33.438] (==) VESA(0): Backing store disabled
[    33.441] (==) VESA(0): DPMS enabled
[    33.441] (==) RandR enabled
[    33.463] (II) AIGLX: Screen 0 is not DRI2 capable
[    33.463] (II) AIGLX: Screen 0 is not DRI capable
[    33.735] (II) AIGLX: Loaded and initialized swrast
[    33.735] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    33.891] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    33.891] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.891] (**) Power Button: Applying InputClass "Keyboard defaults"
[    33.891] (II) LoadModule: "evdev"
[    33.892] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    33.897] (II) Module evdev: vendor="X.Org Foundation"
[    33.897] 	compiled for 1.13.0, module version = 2.7.3
[    33.897] 	Module class: X.Org XInput Driver
[    33.897] 	ABI class: X.Org XInput driver, version 18.0
[    33.897] (II) Using input driver 'evdev' for 'Power Button'
[    33.897] (**) Power Button: always reports core events
[    33.897] (**) evdev: Power Button: Device: "/dev/input/event3"
[    33.897] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.897] (--) evdev: Power Button: Found keys
[    33.897] (II) evdev: Power Button: Configuring as keyboard
[    33.897] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    33.897] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.897] (**) Option "xkb_rules" "evdev"
[    33.897] (**) Option "xkb_model" "pc105"
[    33.897] (**) Option "xkb_layout" "fr,us"
[    33.897] (**) Option "xkb_variant" "oss"
[    33.897] (**) Option "xkb_options" "grp:menu_toggle"
[    33.961] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    33.961] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    33.961] (**) Video Bus: Applying InputClass "Keyboard defaults"
[    33.961] (II) Using input driver 'evdev' for 'Video Bus'
[    33.961] (**) Video Bus: always reports core events
[    33.961] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    33.961] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    33.961] (--) evdev: Video Bus: Found keys
[    33.961] (II) evdev: Video Bus: Configuring as keyboard
[    33.961] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/LNXVIDEO:00/input/input4/event4"
[    33.961] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    33.961] (**) Option "xkb_rules" "evdev"
[    33.961] (**) Option "xkb_model" "pc105"
[    33.961] (**) Option "xkb_layout" "fr,us"
[    33.961] (**) Option "xkb_variant" "oss"
[    33.961] (**) Option "xkb_options" "grp:menu_toggle"
[    33.962] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    33.962] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.962] (**) Power Button: Applying InputClass "Keyboard defaults"
[    33.962] (II) Using input driver 'evdev' for 'Power Button'
[    33.962] (**) Power Button: always reports core events
[    33.962] (**) evdev: Power Button: Device: "/dev/input/event1"
[    33.962] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.962] (--) evdev: Power Button: Found keys
[    33.962] (II) evdev: Power Button: Configuring as keyboard
[    33.962] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    33.962] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    33.962] (**) Option "xkb_rules" "evdev"
[    33.962] (**) Option "xkb_model" "pc105"
[    33.962] (**) Option "xkb_layout" "fr,us"
[    33.962] (**) Option "xkb_variant" "oss"
[    33.962] (**) Option "xkb_options" "grp:menu_toggle"
[    33.963] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    33.964] (II) No input driver specified, ignoring this device.
[    33.964] (II) This device may have been added with another device file.
[    33.964] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    33.964] (II) No input driver specified, ignoring this device.
[    33.964] (II) This device may have been added with another device file.
[    33.964] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    33.964] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    33.964] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard defaults"
[    33.965] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    33.965] (**) AT Translated Set 2 keyboard: always reports core events
[    33.965] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    33.965] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    33.965] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    33.965] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    33.965] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    33.965] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    33.965] (**) Option "xkb_rules" "evdev"
[    33.965] (**) Option "xkb_model" "pc105"
[    33.965] (**) Option "xkb_layout" "fr,us"
[    33.965] (**) Option "xkb_variant" "oss"
[    33.965] (**) Option "xkb_options" "grp:menu_toggle"
[    33.966] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event7)
[    33.966] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    33.966] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    33.966] (**) PS/2 Mouse: always reports core events
[    33.966] (**) evdev: PS/2 Mouse: Device: "/dev/input/event7"
[    33.966] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    33.966] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    33.966] (--) evdev: PS/2 Mouse: Found relative axes
[    33.966] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    33.966] (II) evdev: PS/2 Mouse: Configuring as mouse
[    33.966] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    33.966] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.966] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[    33.966] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 10)
[    33.966] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    33.967] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    33.967] (**) PS/2 Mouse: (accel) acceleration profile 0
[    33.967] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    33.967] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    33.967] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[    33.967] (II) No input driver specified, ignoring this device.
[    33.967] (II) This device may have been added with another device file.
[    33.968] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event8)
[    33.968] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    33.968] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    33.968] (II) LoadModule: "synaptics"
[    33.968] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    33.971] (II) Module synaptics: vendor="X.Org Foundation"
[    33.971] 	compiled for 1.13.0, module version = 1.6.2
[    33.972] 	Module class: X.Org XInput Driver
[    33.972] 	ABI class: X.Org XInput driver, version 18.0
[    33.972] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    33.972] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    33.972] (**) Option "Device" "/dev/input/event8"
[    33.972] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[    33.972] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[    33.972] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    33.972] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    33.972] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    33.972] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    33.972] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    33.972] (**) Option "TapButton1" "1"
[    33.972] (**) Option "TapButton2" "2"
[    33.972] (**) Option "TapButton3" "3"
[    33.972] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    33.972] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    33.972] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[    33.972] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[    33.973] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    33.973] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    33.973] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[    33.973] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    33.973] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    33.973] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    33.973] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    33.973] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    33.974] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    33.974] (II) No input driver specified, ignoring this device.
[    33.974] (II) This device may have been added with another device file.
[    33.974] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    33.974] (II) No input driver specified, ignoring this device.
[    33.974] (II) This device may have been added with another device file.

Supprime vga=791 qui est en conflit avec KMS (modesetting)

Bonjour Benjarobin

J'ai retiré cette option de grub, mais le problème demeure. Comme xf86-video-modesetting n'était pas intallé, je suis passé par Xubuntu : j'ai monté la clé USB qui contient mon système Arch, et j'ai chrooté sur le point de montage pour installer ce paquet avec pacman. Malheureusement ça plante toujours.

Voici ce que dit /var/log/boot :

Code : Tout sélectionner

Sun Oct 21 18:44:20 2012: :: Setting hostname: isis    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012:  HARDWARECLOCK= is deprecated. See rc.conf(5) and hwclock(8) for details. 
Sun Oct 21 18:44:20 2012: :: Adjusting system time and setting kernel time zone    [BUSY]  TIMEZONE= is deprecated. See rc.conf(5) for details. 
Sun Oct 21 18:44:20 2012:    [DONE] 
Sun Oct 21 18:44:20 2012: :: Starting udev daemon    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012: :: Triggering udev uevents    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012: :: Loading user-specified modules    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012: :: Waiting for udev uevents to be processed    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012: :: Configuring virtual consoles    [BUSY] %G   [DONE] 
Sun Oct 21 18:44:20 2012: :: Bringing up loopback interface    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012: :: Checking filesystems    [BUSY] /dev/sdb3Â : propre, 16423/566352 fichiers, 483061/2260992 blocs
Sun Oct 21 18:44:20 2012:    [DONE] 
Sun Oct 21 18:44:20 2012: :: Remounting root and API filesystems    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012: :: Mounting local filesystems    [BUSY]    [DONE] 
Sun Oct 21 18:44:20 2012: :: Activating swap    [BUSY]    [DONE] 
Sun Oct 21 18:44:21 2012: :: Configuring time zone    [BUSY]    [DONE] 
Sun Oct 21 18:44:21 2012: :: Initializing random seed    [BUSY]    [DONE] 
Sun Oct 21 18:44:21 2012: :: Removing leftover files    [BUSY]    [DONE] 
Sun Oct 21 18:44:21 2012: :: Saving dmesg log    [BUSY]    [DONE] 
Sun Oct 21 18:44:21 2012: INIT: Entering runlevel: 3
Sun Oct 21 18:44:21 2012: :: Starting Syslog-NG    [BUSY] Error binding socket; addr='AF_UNIX(/run/systemd/journal/syslog)', error='No such file or directory (2)'
Sun Oct 21 18:44:21 2012: Error initializing source driver; source='src', id='src#0'
Sun Oct 21 18:44:21 2012: Error initializing message pipeline;
Sun Oct 21 18:44:21 2012:    [FAIL] 
Sun Oct 21 18:44:21 2012: :: Starting crond daemon    [BUSY]    [DONE] 
Sun Oct 21 18:44:21 2012: :: Starting D-BUS system messagebus    [BUSY]    [DONE] 
Sun Oct 21 18:44:21 2012: :: Starting net-profiles    [BKGD] 
Sun Oct 21 18:44:21 2012: :: Starting ntpd    [BKGD] 
Sun Oct 21 18:44:21 2012: :: Starting Simple Login Manager    [BUSY]    [DONE] 
Sun Oct 21 18:44:22 2012: *** Scripts perso : /etc/rc.local
Sun Oct 21 18:44:22 2012: 1 : Suppression du biiiiip dans les tty
Sun Oct 21 18:44:22 2012:

Et /var/log/Xorg.0.log :

Code : Tout sélectionner

[    13.413] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    13.413] X Protocol Version 11, Revision 0
[    13.413] Build Operating System: Linux 3.6.2-1-ARCH i686 
[    13.413] Current Operating System: Linux isis 3.6.2-1-ARCH #1 SMP PREEMPT Sat Oct 13 07:19:40 CEST 2012 i686
[    13.413] Kernel command line: root=/dev/disk/by-uuid/aca6fbe5-fa73-448b-860f-aff62b18bb4b ro acpi_osi=Linux
[    13.413] Build Date: 19 October 2012  03:58:01PM
[    13.413]  
[    13.413] Current version of pixman: 0.26.2
[    13.413] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.413] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.414] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 21 18:44:22 2012
[    13.429] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.431] (==) No Layout section.  Using the first Screen section.
[    13.431] (==) No screen section available. Using defaults.
[    13.432] (**) |-->Screen "Default Screen Section" (0)
[    13.432] (**) |   |-->Monitor "<default monitor>"
[    13.436] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    13.436] (==) Automatically adding devices
[    13.436] (==) Automatically enabling devices
[    13.436] (==) Automatically adding GPU devices
[    13.456] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    13.456] 	Entry deleted from font path.
[    13.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    13.457] 	Entry deleted from font path.
[    13.457] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    13.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    13.457] 	Entry deleted from font path.
[    13.457] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    13.457] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    13.458] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.458] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.458] (II) Loader magic: 0x825a620
[    13.458] (II) Module ABI versions:
[    13.458] 	X.Org ANSI C Emulation: 0.4
[    13.458] 	X.Org Video Driver: 13.0
[    13.459] 	X.Org XInput driver : 18.0
[    13.459] 	X.Org Server Extension : 7.0
[    13.463] (--) PCI:*(0:1:0:0) 1106:3371:1734:10cb rev 1, Mem @ 0xa0000000/536870912, 0xc8000000/16777216
[    13.463] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    13.465] Initializing built-in extension Generic Event Extension
[    13.465] Initializing built-in extension SHAPE
[    13.465] Initializing built-in extension MIT-SHM
[    13.465] Initializing built-in extension XInputExtension
[    13.465] Initializing built-in extension XTEST
[    13.465] Initializing built-in extension BIG-REQUESTS
[    13.465] Initializing built-in extension SYNC
[    13.465] Initializing built-in extension XKEYBOARD
[    13.465] Initializing built-in extension XC-MISC
[    13.465] Initializing built-in extension SECURITY
[    13.465] Initializing built-in extension XINERAMA
[    13.465] Initializing built-in extension XFIXES
[    13.465] Initializing built-in extension RENDER
[    13.465] Initializing built-in extension RANDR
[    13.465] Initializing built-in extension COMPOSITE
[    13.465] Initializing built-in extension DAMAGE
[    13.465] Initializing built-in extension MIT-SCREEN-SAVER
[    13.465] Initializing built-in extension DOUBLE-BUFFER
[    13.465] Initializing built-in extension RECORD
[    13.465] Initializing built-in extension DPMS
[    13.465] Initializing built-in extension X-Resource
[    13.465] Initializing built-in extension XVideo
[    13.465] Initializing built-in extension XVideo-MotionCompensation
[    13.465] Initializing built-in extension XFree86-VidModeExtension
[    13.466] Initializing built-in extension XFree86-DGA
[    13.466] Initializing built-in extension XFree86-DRI
[    13.466] Initializing built-in extension DRI2
[    13.466] (II) LoadModule: "glx"
[    13.473] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.492] (II) Module glx: vendor="X.Org Foundation"
[    13.492] 	compiled for 1.13.0, module version = 1.0.0
[    13.492] 	ABI class: X.Org Server Extension, version 7.0
[    13.492] (==) AIGLX enabled
[    13.493] Loading extension GLX
[    13.493] (==) Matched openchrome as autoconfigured driver 0
[    13.493] (==) Matched vesa as autoconfigured driver 1
[    13.493] (==) Matched modesetting as autoconfigured driver 2
[    13.493] (==) Matched fbdev as autoconfigured driver 3
[    13.493] (==) Assigned the driver to the xf86ConfigLayout
[    13.493] (II) LoadModule: "openchrome"
[    13.513] (WW) Warning, couldn't open module openchrome
[    13.514] (II) UnloadModule: "openchrome"
[    13.514] (II) Unloading openchrome
[    13.514] (EE) Failed to load module "openchrome" (module does not exist, 0)
[    13.514] (II) LoadModule: "vesa"
[    13.514] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    13.516] (II) Module vesa: vendor="X.Org Foundation"
[    13.516] 	compiled for 1.13.0, module version = 2.3.2
[    13.516] 	Module class: X.Org Video Driver
[    13.516] 	ABI class: X.Org Video Driver, version 13.0
[    13.516] (II) LoadModule: "modesetting"
[    13.517] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    13.519] (II) Module modesetting: vendor="X.Org Foundation"
[    13.519] 	compiled for 1.13.0, module version = 0.5.0
[    13.519] 	Module class: X.Org Video Driver
[    13.519] 	ABI class: X.Org Video Driver, version 13.0
[    13.519] (II) LoadModule: "fbdev"
[    13.519] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    13.521] (II) Module fbdev: vendor="X.Org Foundation"
[    13.521] 	compiled for 1.13.0, module version = 0.4.3
[    13.521] 	Module class: X.Org Video Driver
[    13.521] 	ABI class: X.Org Video Driver, version 13.0
[    13.521] (II) VESA: driver for VESA chipsets: vesa
[    13.521] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    13.521] (II) FBDEV: driver for framebuffer: fbdev
[    13.521] (++) using VT number 7

[    13.528] (WW) Falling back to old probe method for modesetting
[    13.528] (EE) open /dev/dri/card0: No such file or directory
[    13.528] (WW) Falling back to old probe method for fbdev
[    13.528] (II) Loading sub module "fbdevhw"
[    13.528] (II) LoadModule: "fbdevhw"
[    13.529] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    13.531] (II) Module fbdevhw: vendor="X.Org Foundation"
[    13.531] 	compiled for 1.13.0, module version = 0.0.2
[    13.531] 	ABI class: X.Org Video Driver, version 13.0
[    13.531] (II) Loading sub module "vbe"
[    13.531] (II) LoadModule: "vbe"
[    13.532] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    13.533] (II) Module vbe: vendor="X.Org Foundation"
[    13.533] 	compiled for 1.13.0, module version = 1.1.0
[    13.533] 	ABI class: X.Org Video Driver, version 13.0
[    13.533] (II) Loading sub module "int10"
[    13.533] (II) LoadModule: "int10"
[    13.534] (II) Loading /usr/lib/xorg/modules/libint10.so
[    13.538] (II) Module int10: vendor="X.Org Foundation"
[    13.538] 	compiled for 1.13.0, module version = 1.0.0
[    13.538] 	ABI class: X.Org Video Driver, version 13.0
[    13.538] (II) VESA(0): initializing int10
[    13.547] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[    13.548] (II) VESA(0): VESA BIOS detected
[    13.548] (II) VESA(0): VESA VBE Version 3.0
[    13.548] (II) VESA(0): VESA VBE Total Mem: 262144 kB
[    13.548] (II) VESA(0): VESA VBE OEM: VIA N3364

[    13.548] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[    13.548] (II) VESA(0): VESA VBE OEM Vendor: 
[    13.548] (II) VESA(0): VESA VBE OEM Product: 
[    13.548] (II) VESA(0): VESA VBE OEM Product Rev: 
[    13.595] (II) VESA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    13.595] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[    13.595] (==) VESA(0): RGB weight 888
[    13.595] (==) VESA(0): Default visual is TrueColor
[    13.595] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[    13.595] (II) Loading sub module "ddc"
[    13.595] (II) LoadModule: "ddc"
[    13.595] (II) Module "ddc" already built-in
[    13.596] (II) VESA(0): VESA VBE DDC supported
[    13.596] (II) VESA(0): VESA VBE DDC Level 2
[    13.596] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[    13.964] (II) VESA(0): VESA VBE DDC read failed
[    13.964] (II) VESA(0): Searching for matching VESA mode(s):
[    13.966] Mode: 101 (640x480)
[    13.966] 	ModeAttributes: 0x9f
[    13.966] 	WinAAttributes: 0x7
[    13.966] 	WinBAttributes: 0x0
[    13.966] 	WinGranularity: 64
[    13.966] 	WinSize: 64
[    13.966] 	WinASegment: 0xa000
[    13.966] 	WinBSegment: 0xa000
[    13.966] 	WinFuncPtr: 0xc000ad95
[    13.966] 	BytesPerScanline: 640
[    13.966] 	XResolution: 640
[    13.966] 	YResolution: 480
[    13.966] 	XCharSize: 8
[    13.966] 	YCharSize: 16
[    13.966] 	NumberOfPlanes: 1
[    13.966] 	BitsPerPixel: 8
[    13.966] 	NumberOfBanks: 1

*** Suivent environ 1500 lignes du même type ***

[    14.029] 	LinRedFieldPosition: 16
[    14.029] 	LinGreenMaskSize: 8
[    14.029] 	LinGreenFieldPosition: 8
[    14.029] 	LinBlueMaskSize: 8
[    14.029] 	LinBlueFieldPosition: 0
[    14.029] 	LinRsvdMaskSize: 0
[    14.029] 	LinRsvdFieldPosition: 0
[    14.029] 	MaxPixelClock: 0
[    14.029] 
[    14.029] (II) VESA(0): Total Memory: 4096 64KB banks (262144kB)
[    14.029] (II) VESA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[    14.029] (II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[    14.029] (II) VESA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[    14.029] (WW) VESA(0): Unable to estimate virtual size
[    14.029] (II) VESA(0): Not using built-in mode "1920x1080" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "1400x1050" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "1280x800" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "1280x768" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "1280x720" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "720x576" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "720x540" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "720x480" (no mode of this name)
[    14.029] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[    14.029] (WW) VESA(0): No valid modes left. Trying less strict filter...
[    14.029] (II) VESA(0): <default monitor>: Using hsync range of 31.50-48.00 kHz
[    14.029] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-70.00 Hz
[    14.029] (II) VESA(0): <default monitor>: Using maximum pixel clock of 65.00 MHz
[    14.029] (WW) VESA(0): Unable to estimate virtual size
[    14.029] (II) VESA(0): Not using built-in mode "1920x1080" (hsync out of range)
[    14.030] (II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
[    14.030] (II) VESA(0): Not using built-in mode "1400x1050" (hsync out of range)
[    14.030] (II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
[    14.030] (II) VESA(0): Not using built-in mode "1280x800" (hsync out of range)
[    14.030] (II) VESA(0): Not using built-in mode "1280x768" (hsync out of range)
[    14.030] (--) VESA(0): Virtual size is 1280x768 (pitch 1280)
[    14.030] (**) VESA(0): *Built-in mode "1280x720"
[    14.030] (**) VESA(0): *Built-in mode "1024x768"
[    14.030] (**) VESA(0): *Built-in mode "800x600"
[    14.030] (**) VESA(0): *Built-in mode "720x576"
[    14.030] (**) VESA(0): *Built-in mode "720x540"
[    14.030] (**) VESA(0): *Built-in mode "720x480"
[    14.030] (**) VESA(0): *Built-in mode "640x480"
[    14.030] (==) VESA(0): DPI set to (96, 96)
[    14.030] (II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (118)
[    14.030] (II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
[    14.031] (II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
[    14.031] (**) VESA(0): Using "Shadow Framebuffer"
[    14.031] (II) Loading sub module "shadow"
[    14.031] (II) LoadModule: "shadow"
[    14.031] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    14.033] (II) Module shadow: vendor="X.Org Foundation"
[    14.033] 	compiled for 1.13.0, module version = 1.1.0
[    14.033] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.033] (II) Loading sub module "fb"
[    14.033] (II) LoadModule: "fb"
[    14.033] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.040] (II) Module fb: vendor="X.Org Foundation"
[    14.040] 	compiled for 1.13.0, module version = 1.0.0
[    14.040] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.040] (II) UnloadModule: "modesetting"
[    14.040] (II) Unloading modesetting
[    14.040] (II) UnloadModule: "fbdev"
[    14.040] (II) Unloading fbdev
[    14.040] (II) UnloadSubModule: "fbdevhw"
[    14.040] (II) Unloading fbdevhw
[    14.040] (==) Depth 24 pixmap format is 32 bpp
[    14.040] (II) Loading sub module "int10"
[    14.040] (II) LoadModule: "int10"
[    14.040] (II) Loading /usr/lib/xorg/modules/libint10.so
[    14.040] (II) Module int10: vendor="X.Org Foundation"
[    14.040] 	compiled for 1.13.0, module version = 1.0.0
[    14.041] 	ABI class: X.Org Video Driver, version 13.0
[    14.041] (II) VESA(0): initializing int10
[    14.046] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[    14.047] (II) VESA(0): VESA BIOS detected
[    14.047] (II) VESA(0): VESA VBE Version 3.0
[    14.047] (II) VESA(0): VESA VBE Total Mem: 262144 kB
[    14.047] (II) VESA(0): VESA VBE OEM: VIA N3364

[    14.047] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[    14.047] (II) VESA(0): VESA VBE OEM Vendor: 
[    14.047] (II) VESA(0): VESA VBE OEM Product: 
[    14.047] (II) VESA(0): VESA VBE OEM Product Rev: 
[    14.055] (II) VESA(0): virtual address = 0x97031000,
	physical address = 0xa0000000, size = 268435456
[    26.966] (II) VESA(0): Setting up VESA Mode 0x127 (1280x720)
[    27.509] (==) VESA(0): Default visual is TrueColor
[    27.520] (==) VESA(0): Backing store disabled
[    27.524] (==) VESA(0): DPMS enabled
[    27.524] (==) RandR enabled
[    27.558] (II) AIGLX: Screen 0 is not DRI2 capable
[    27.558] (II) AIGLX: Screen 0 is not DRI capable
[    27.830] (II) AIGLX: Loaded and initialized swrast
[    27.830] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    28.003] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    28.003] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.003] (**) Power Button: Applying InputClass "Keyboard defaults"
[    28.003] (II) LoadModule: "evdev"
[    28.003] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.008] (II) Module evdev: vendor="X.Org Foundation"
[    28.008] 	compiled for 1.13.0, module version = 2.7.3
[    28.008] 	Module class: X.Org XInput Driver
[    28.008] 	ABI class: X.Org XInput driver, version 18.0
[    28.008] (II) Using input driver 'evdev' for 'Power Button'
[    28.008] (**) Power Button: always reports core events
[    28.008] (**) evdev: Power Button: Device: "/dev/input/event3"
[    28.008] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.008] (--) evdev: Power Button: Found keys
[    28.008] (II) evdev: Power Button: Configuring as keyboard
[    28.009] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    28.009] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.009] (**) Option "xkb_rules" "evdev"
[    28.009] (**) Option "xkb_model" "pc105"
[    28.009] (**) Option "xkb_layout" "fr,us"
[    28.009] (**) Option "xkb_variant" "oss"
[    28.009] (**) Option "xkb_options" "grp:menu_toggle"
[    28.068] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    28.068] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    28.068] (**) Video Bus: Applying InputClass "Keyboard defaults"
[    28.068] (II) Using input driver 'evdev' for 'Video Bus'
[    28.068] (**) Video Bus: always reports core events
[    28.068] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    28.068] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    28.068] (--) evdev: Video Bus: Found keys
[    28.068] (II) evdev: Video Bus: Configuring as keyboard
[    28.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/LNXVIDEO:00/input/input4/event4"
[    28.069] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.069] (**) Option "xkb_rules" "evdev"
[    28.069] (**) Option "xkb_model" "pc105"
[    28.069] (**) Option "xkb_layout" "fr,us"
[    28.069] (**) Option "xkb_variant" "oss"
[    28.069] (**) Option "xkb_options" "grp:menu_toggle"
[    28.069] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    28.070] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.070] (**) Power Button: Applying InputClass "Keyboard defaults"
[    28.070] (II) Using input driver 'evdev' for 'Power Button'
[    28.070] (**) Power Button: always reports core events
[    28.070] (**) evdev: Power Button: Device: "/dev/input/event1"
[    28.070] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.070] (--) evdev: Power Button: Found keys
[    28.070] (II) evdev: Power Button: Configuring as keyboard
[    28.070] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    28.070] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    28.070] (**) Option "xkb_rules" "evdev"
[    28.070] (**) Option "xkb_model" "pc105"
[    28.070] (**) Option "xkb_layout" "fr,us"
[    28.070] (**) Option "xkb_variant" "oss"
[    28.070] (**) Option "xkb_options" "grp:menu_toggle"
[    28.071] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    28.071] (II) No input driver specified, ignoring this device.
[    28.071] (II) This device may have been added with another device file.
[    28.071] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    28.071] (II) No input driver specified, ignoring this device.
[    28.071] (II) This device may have been added with another device file.
[    28.072] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.072] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.072] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard defaults"
[    28.072] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    28.072] (**) AT Translated Set 2 keyboard: always reports core events
[    28.072] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    28.072] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    28.072] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    28.072] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    28.072] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.072] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    28.072] (**) Option "xkb_rules" "evdev"
[    28.072] (**) Option "xkb_model" "pc105"
[    28.072] (**) Option "xkb_layout" "fr,us"
[    28.072] (**) Option "xkb_variant" "oss"
[    28.072] (**) Option "xkb_options" "grp:menu_toggle"
[    28.073] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event7)
[    28.073] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    28.073] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    28.073] (**) PS/2 Mouse: always reports core events
[    28.073] (**) evdev: PS/2 Mouse: Device: "/dev/input/event7"
[    28.073] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    28.073] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    28.073] (--) evdev: PS/2 Mouse: Found relative axes
[    28.073] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    28.073] (II) evdev: PS/2 Mouse: Configuring as mouse
[    28.073] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    28.073] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.073] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[    28.073] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 10)
[    28.074] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    28.074] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    28.074] (**) PS/2 Mouse: (accel) acceleration profile 0
[    28.074] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    28.074] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    28.074] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[    28.074] (II) No input driver specified, ignoring this device.
[    28.074] (II) This device may have been added with another device file.
[    28.075] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event8)
[    28.075] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    28.075] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    28.075] (II) LoadModule: "synaptics"
[    28.075] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    28.079] (II) Module synaptics: vendor="X.Org Foundation"
[    28.079] 	compiled for 1.13.0, module version = 1.6.2
[    28.079] 	Module class: X.Org XInput Driver
[    28.079] 	ABI class: X.Org XInput driver, version 18.0
[    28.079] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    28.079] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    28.079] (**) Option "Device" "/dev/input/event8"
[    28.080] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[    28.080] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[    28.080] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    28.080] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    28.080] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    28.080] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    28.080] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    28.080] (**) Option "TapButton1" "1"
[    28.080] (**) Option "TapButton2" "2"
[    28.080] (**) Option "TapButton3" "3"
[    28.080] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    28.080] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    28.080] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[    28.080] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[    28.080] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    28.080] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    28.080] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[    28.081] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    28.081] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    28.081] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    28.081] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    28.081] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    28.081] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    28.081] (II) No input driver specified, ignoring this device.
[    28.081] (II) This device may have been added with another device file.
[    28.082] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    28.082] (II) No input driver specified, ignoring this device.
[    28.082] (II) This device may have been added with another device file.

Face à ce résultat peu concluant, j'ai recommencé en installant xf86-video-openchrome, de nouveau via pacman dans un système chrooté à l'intérieur de Xubuntu. Et c'est toujours pareil.

Comme ce post est trop long, je mets les fichiers de log dans le message suivant.
Cordialement,

Re-bonjour

Voici donc les fichiers de boot quand xf86-video-openchrome est installé.

/var/log/boot :

Code : Tout sélectionner

Sun Oct 21 19:03:36 2012: :: Setting hostname: isis    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012:  HARDWARECLOCK= is deprecated. See rc.conf(5) and hwclock(8) for details. 
Sun Oct 21 19:03:36 2012: :: Adjusting system time and setting kernel time zone    [BUSY]  TIMEZONE= is deprecated. See rc.conf(5) for details. 
Sun Oct 21 19:03:36 2012:    [DONE] 
Sun Oct 21 19:03:36 2012: :: Starting udev daemon    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012: :: Triggering udev uevents    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012: :: Loading user-specified modules    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012: :: Waiting for udev uevents to be processed    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012: :: Configuring virtual consoles    [BUSY] %G   [DONE] 
Sun Oct 21 19:03:36 2012: :: Bringing up loopback interface    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012: :: Checking filesystems    [BUSY] /dev/sdb3Â : propre, 16423/566352 fichiers, 483061/2260992 blocs
Sun Oct 21 19:03:36 2012:    [DONE] 
Sun Oct 21 19:03:36 2012: :: Remounting root and API filesystems    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012: :: Mounting local filesystems    [BUSY]    [DONE] 
Sun Oct 21 19:03:36 2012: :: Activating swap    [BUSY]    [DONE] 
Sun Oct 21 19:03:37 2012: :: Configuring time zone    [BUSY]    [DONE] 
Sun Oct 21 19:03:37 2012: :: Initializing random seed    [BUSY]    [DONE] 
Sun Oct 21 19:03:37 2012: :: Removing leftover files    [BUSY]    [DONE] 
Sun Oct 21 19:03:37 2012: :: Saving dmesg log    [BUSY]    [DONE] 
Sun Oct 21 19:03:37 2012: INIT: Entering runlevel: 3
Sun Oct 21 19:03:37 2012: :: Starting Syslog-NG    [BUSY] Error binding socket; addr='AF_UNIX(/run/systemd/journal/syslog)', error='No such file or directory (2)'
Sun Oct 21 19:03:37 2012: Error initializing source driver; source='src', id='src#0'
Sun Oct 21 19:03:37 2012: Error initializing message pipeline;
Sun Oct 21 19:03:37 2012:    [FAIL] 
Sun Oct 21 19:03:37 2012: :: Starting crond daemon    [BUSY]    [DONE] 
Sun Oct 21 19:03:37 2012: :: Starting D-BUS system messagebus    [BUSY]    [DONE] 
Sun Oct 21 19:03:37 2012: :: Starting net-profiles    [BKGD] 
Sun Oct 21 19:03:37 2012: :: Starting ntpd    [BKGD] 
Sun Oct 21 19:03:37 2012: :: Starting Simple Login Manager    [BUSY]    [DONE] 
Sun Oct 21 19:03:38 2012: *** Scripts perso : /etc/rc.local
Sun Oct 21 19:03:38 2012: 1 : Suppression du biiiiip dans les tty
Sun Oct 21 19:03:38 2012:

/var/log/Xorg.0.log :

Code : Tout sélectionner

[    13.402] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    13.403] X Protocol Version 11, Revision 0
[    13.403] Build Operating System: Linux 3.6.2-1-ARCH i686 
[    13.403] Current Operating System: Linux isis 3.6.2-1-ARCH #1 SMP PREEMPT Sat Oct 13 07:19:40 CEST 2012 i686
[    13.403] Kernel command line: root=/dev/disk/by-uuid/aca6fbe5-fa73-448b-860f-aff62b18bb4b ro acpi_osi=Linux
[    13.403] Build Date: 19 October 2012  03:58:01PM
[    13.403]  
[    13.403] Current version of pixman: 0.26.2
[    13.403] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.403] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.403] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 21 19:03:38 2012
[    13.413] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.415] (==) No Layout section.  Using the first Screen section.
[    13.415] (==) No screen section available. Using defaults.
[    13.415] (**) |-->Screen "Default Screen Section" (0)
[    13.415] (**) |   |-->Monitor "<default monitor>"
[    13.419] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    13.419] (==) Automatically adding devices
[    13.419] (==) Automatically enabling devices
[    13.419] (==) Automatically adding GPU devices
[    13.438] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    13.438] 	Entry deleted from font path.
[    13.439] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    13.439] 	Entry deleted from font path.
[    13.439] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    13.440] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    13.440] 	Entry deleted from font path.
[    13.440] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    13.440] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    13.440] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.440] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.441] (II) Loader magic: 0x825a620
[    13.441] (II) Module ABI versions:
[    13.441] 	X.Org ANSI C Emulation: 0.4
[    13.441] 	X.Org Video Driver: 13.0
[    13.441] 	X.Org XInput driver : 18.0
[    13.441] 	X.Org Server Extension : 7.0
[    13.444] (--) PCI:*(0:1:0:0) 1106:3371:1734:10cb rev 1, Mem @ 0xa0000000/536870912, 0xc8000000/16777216
[    13.444] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    13.445] Initializing built-in extension Generic Event Extension
[    13.445] Initializing built-in extension SHAPE
[    13.445] Initializing built-in extension MIT-SHM
[    13.445] Initializing built-in extension XInputExtension
[    13.445] Initializing built-in extension XTEST
[    13.445] Initializing built-in extension BIG-REQUESTS
[    13.445] Initializing built-in extension SYNC
[    13.446] Initializing built-in extension XKEYBOARD
[    13.446] Initializing built-in extension XC-MISC
[    13.446] Initializing built-in extension SECURITY
[    13.446] Initializing built-in extension XINERAMA
[    13.446] Initializing built-in extension XFIXES
[    13.446] Initializing built-in extension RENDER
[    13.446] Initializing built-in extension RANDR
[    13.446] Initializing built-in extension COMPOSITE
[    13.446] Initializing built-in extension DAMAGE
[    13.446] Initializing built-in extension MIT-SCREEN-SAVER
[    13.446] Initializing built-in extension DOUBLE-BUFFER
[    13.446] Initializing built-in extension RECORD
[    13.446] Initializing built-in extension DPMS
[    13.446] Initializing built-in extension X-Resource
[    13.446] Initializing built-in extension XVideo
[    13.446] Initializing built-in extension XVideo-MotionCompensation
[    13.446] Initializing built-in extension XFree86-VidModeExtension
[    13.446] Initializing built-in extension XFree86-DGA
[    13.446] Initializing built-in extension XFree86-DRI
[    13.446] Initializing built-in extension DRI2
[    13.446] (II) LoadModule: "glx"
[    13.453] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.472] (II) Module glx: vendor="X.Org Foundation"
[    13.472] 	compiled for 1.13.0, module version = 1.0.0
[    13.472] 	ABI class: X.Org Server Extension, version 7.0
[    13.472] (==) AIGLX enabled
[    13.473] Loading extension GLX
[    13.473] (==) Matched openchrome as autoconfigured driver 0
[    13.473] (==) Matched vesa as autoconfigured driver 1
[    13.473] (==) Matched modesetting as autoconfigured driver 2
[    13.473] (==) Matched fbdev as autoconfigured driver 3
[    13.473] (==) Assigned the driver to the xf86ConfigLayout
[    13.473] (II) LoadModule: "openchrome"
[    13.479] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[    13.494] (II) Module openchrome: vendor="http://openchrome.org/"
[    13.494] 	compiled for 1.13.0, module version = 0.3.1
[    13.494] 	Module class: X.Org Video Driver
[    13.494] 	ABI class: X.Org Video Driver, version 13.0
[    13.494] (II) LoadModule: "vesa"
[    13.494] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    13.496] (II) Module vesa: vendor="X.Org Foundation"
[    13.496] 	compiled for 1.13.0, module version = 2.3.2
[    13.496] 	Module class: X.Org Video Driver
[    13.496] 	ABI class: X.Org Video Driver, version 13.0
[    13.496] (II) LoadModule: "modesetting"
[    13.497] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    13.499] (II) Module modesetting: vendor="X.Org Foundation"
[    13.499] 	compiled for 1.13.0, module version = 0.5.0
[    13.499] 	Module class: X.Org Video Driver
[    13.499] 	ABI class: X.Org Video Driver, version 13.0
[    13.499] (II) LoadModule: "fbdev"
[    13.500] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    13.501] (II) Module fbdev: vendor="X.Org Foundation"
[    13.501] 	compiled for 1.13.0, module version = 0.4.3
[    13.501] 	Module class: X.Org Video Driver
[    13.501] 	ABI class: X.Org Video Driver, version 13.0
[    13.501] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
	K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
	CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
	VX855/VX875, VX900
[    13.502] (II) VESA: driver for VESA chipsets: vesa
[    13.502] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    13.502] (II) FBDEV: driver for framebuffer: fbdev
[    13.502] (++) using VT number 7

[    13.509] (!!) VIA Technologies does not support this driver in any way.
[    13.509] (!!) For support, please refer to http://www.openchrome.org/.
[    13.509] (!!) (openchrome 0.3.1 release)
[    13.509] (WW) Falling back to old probe method for vesa
[    13.509] (WW) Falling back to old probe method for modesetting
[    13.509] (EE) open /dev/dri/card0: No such file or directory
[    13.509] (WW) Falling back to old probe method for fbdev
[    13.509] (II) Loading sub module "fbdevhw"
[    13.509] (II) LoadModule: "fbdevhw"
[    13.533] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    13.535] (II) Module fbdevhw: vendor="X.Org Foundation"
[    13.535] 	compiled for 1.13.0, module version = 0.0.2
[    13.535] 	ABI class: X.Org Video Driver, version 13.0
[    13.535] (II) CHROME(0): VIAPreInit
[    13.536] (II) CHROME(0): VIAGetRec
[    13.536] (--) CHROME(0): Chipset: P4M900/VN896/CN896
[    13.536] (--) CHROME(0): Chipset revision: 0
[    13.645] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[    13.646] (II) Loading sub module "vgahw"
[    13.646] (II) LoadModule: "vgahw"
[    13.653] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    13.655] (II) Module vgahw: vendor="X.Org Foundation"
[    13.655] 	compiled for 1.13.0, module version = 0.1.0
[    13.655] 	ABI class: X.Org Video Driver, version 13.0
[    13.655] (--) CHROME(0): Probed amount of VideoRAM = 262144 kB
[    13.655] (II) CHROME(0): VIAMapMMIO
[    13.655] (--) CHROME(0): mapping MMIO @ 0xc8000000 with size 0xd000
[    13.656] (--) CHROME(0): mapping BitBlt MMIO @ 0xc8200000 with size 0x200000
[    13.656] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    13.656] (II) CHROME(0): VIAMapFB
[    13.656] (--) CHROME(0): mapping framebuffer @ 0xa0000000 with size 0x10000000
[    13.669] (--) CHROME(0): Frame buffer start: 0x96f0e000, free start: 0x0 end: 0x10000000
[    13.669] (II) CHROME(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    13.669] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[    13.669] (==) CHROME(0): RGB weight 888
[    13.669] (==) CHROME(0): Default visual is TrueColor
[    13.669] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[    13.669] (==) CHROME(0): Shadow framebuffer is disabled.
[    13.669] (==) CHROME(0): Hardware acceleration is enabled.
[    13.669] (==) CHROME(0): Using EXA acceleration architecture.
[    13.669] (==) CHROME(0): EXA composite acceleration disabled.
[    13.669] (==) CHROME(0): EXA scratch area size is 4096 kB.
[    13.669] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[    13.669] (==) CHROME(0): GPU virtual command queue will be enabled.
[    13.669] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[    13.669] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled.
[    13.669] (==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
[    13.669] (==) CHROME(0): Will not enable VBE modes.
[    13.669] (==) CHROME(0): VBE VGA register save & restore will not be used
	if VBE modes are enabled.
[    13.669] (==) CHROME(0): Xv Bandwidth check is enabled.
[    13.669] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[    13.669] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[    13.669] (==) CHROME(0): TV dotCrawl is disabled.
[    13.669] (==) CHROME(0): TV deflicker is set to 0.
[    13.670] (==) CHROME(0): No default TV type is set.
[    13.670] (==) CHROME(0): No default TV output signal type is set.
[    13.670] (==) CHROME(0): No default TV output port is set.
[    13.670] (==) CHROME(0): Will not print VGA registers.
[    13.670] (==) CHROME(0): Will not scan I2C buses.
[    13.670] (II) CHROME(0): ...Finished parsing config file options.
[    13.670] (--) CHROME(0): Detected Fujitsu/Siemens Amilo Pro V3515. Card-Ids (1734|10CB)
[    13.670] (II) CHROME(0): Detected MemClk 7
[    13.670] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 7
[    13.670] (II) CHROME(0): Detected TV standard: PAL.
[    13.670] (II) Loading sub module "ramdac"
[    13.670] (II) LoadModule: "ramdac"
[    13.670] (II) Module "ramdac" already built-in
[    13.670] (II) Loading sub module "i2c"
[    13.670] (II) LoadModule: "i2c"
[    13.670] (II) Module "i2c" already built-in
[    13.670] (II) CHROME(0): ViaI2CInit
[    13.670] (II) CHROME(0): ViaI2CBus1Init
[    13.670] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
[    13.670] (II) CHROME(0): ViaI2cBus2Init
[    13.670] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
[    13.670] (II) CHROME(0): ViaI2CBus3Init
[    13.670] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
[    13.670] (II) Loading sub module "ddc"
[    13.670] (II) LoadModule: "ddc"
[    13.670] (II) Module "ddc" already built-in
[    13.670] (II) CHROME(0): ViaOutputsDetect
[    13.670] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits.
[    13.670] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[    13.670] (==) CHROME(0): LVDS Panel will not be forced.
[    13.670] (==) CHROME(0): Panel size is not selected from config file.
[    13.670] (II) CHROME(0): Enabling panel from PCI-subsystem ID information.
[    13.670] (II) CHROME(0): Output LVDS-1 has no monitor section
[    13.670] (II) CHROME(0): Output VGA-1 has no monitor section
[    13.672] (II) CHROME(0): VIAGetPanelSizeFromDDCv1
[    13.672] (II) CHROME(0): I2C device "I2C bus 2:ddc2" registered at address 0xA0.
[    13.725] (II) CHROME(0): EDID for output LVDS-1
[    13.725] (II) CHROME(0): Manufacturer: CPT  Model: 13b0  Serial#: 0
[    13.725] (II) CHROME(0): Year: 2007  Week: 1
[    13.725] (II) CHROME(0): EDID Version: 1.3
[    13.725] (II) CHROME(0): Digital Display Input
[    13.725] (II) CHROME(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    13.725] (II) CHROME(0): Gamma: 2.20
[    13.725] (II) CHROME(0): No DPMS capabilities specified
[    13.725] (II) CHROME(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    13.725] (II) CHROME(0): First detailed timing is preferred mode
[    13.725] (II) CHROME(0): redX: 0.615 redY: 0.332   greenX: 0.315 greenY: 0.561
[    13.725] (II) CHROME(0): blueX: 0.152 blueY: 0.127   whiteX: 0.315 whiteY: 0.329
[    13.725] (II) CHROME(0): Manufacturer's mask: 0
[    13.725] (II) CHROME(0): Supported detailed timing:
[    13.725] (II) CHROME(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
[    13.725] (II) CHROME(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
[    13.725] (II) CHROME(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
[    13.725] (II) CHROME(0): Unknown vendor-specific block f
[    13.725] (II) CHROME(0):  CPT
[    13.725] (II) CHROME(0):  CLAA154WA05
[    13.726] (II) CHROME(0): EDID (in hex):
[    13.726] (II) CHROME(0): 	00ffffffffffff000e14b01300000000
[    13.726] (II) CHROME(0): 	01110103802115780a8e2d9d55508f27
[    13.726] (II) CHROME(0): 	20505400000001010101010101010101
[    13.726] (II) CHROME(0): 	010101010101ea1a008050200d301820
[    13.726] (II) CHROME(0): 	13004bcf100000190000000f00202020
[    13.726] (II) CHROME(0): 	2020202020206e050f00000000fe0043
[    13.726] (II) CHROME(0): 	50540a202020202020202020000000fe
[    13.726] (II) CHROME(0): 	00434c4141313534574130350a2000fd
[    13.726] (II) CHROME(0): EDID vendor "CPT", prod id 5040
[    13.726] (II) CHROME(0): Printing DDC gathered Modelines:
[    13.726] (II) CHROME(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz eP)
[    13.726] (II) CHROME(0): VIAGetPanelSizeFromEDID
[    13.726] (II) CHROME(0): VIAGetPanelSizeFromDDCv1: (1280x800)
[    13.726] (II) CHROME(0): ViaPanelLookUpModeIndex, Width 1280, Height 800, NativeModeIndex7
[    13.726] (II) CHROME(0): NativeMode: 1280 800
[    13.726] (II) CHROME(0): EDID vendor "CPT", prod id 5040
[    13.726] (II) CHROME(0): Printing probed modes for output LVDS-1
[    13.726] (II) CHROME(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz eP)
[    13.726] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
[    13.729] (II) CHROME(0): ViaDisplayDisableCRT
[    13.729] (II) CHROME(0): EDID for output VGA-1
[    13.729] (II) CHROME(0): Output LVDS-1 connected
[    13.729] (II) CHROME(0): Output VGA-1 disconnected
[    13.729] (II) CHROME(0): Using exact sizes for initial modes
[    13.729] (II) CHROME(0): Output LVDS-1 using initial mode 1280x800
[    13.729] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    13.730] (**) CHROME(0): Display dimensions: (330, 210) mm
[    13.730] (**) CHROME(0): DPI set to (98, 96)
[    13.730] (II) Loading sub module "fb"
[    13.730] (II) LoadModule: "fb"
[    13.730] (II) Loading /usr/lib/xorg/modules/libfb.so
[    13.736] (II) Module fb: vendor="X.Org Foundation"
[    13.736] 	compiled for 1.13.0, module version = 1.0.0
[    13.736] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.736] (II) Loading sub module "exa"
[    13.736] (II) LoadModule: "exa"
[    13.737] (II) Loading /usr/lib/xorg/modules/libexa.so
[    13.741] (II) Module exa: vendor="X.Org Foundation"
[    13.741] 	compiled for 1.13.0, module version = 2.6.0
[    13.741] 	ABI class: X.Org Video Driver, version 13.0
[    13.741] (II) UnloadModule: "vesa"
[    13.741] (II) Unloading vesa
[    13.741] (II) UnloadModule: "modesetting"
[    13.741] (II) Unloading modesetting
[    13.741] (II) UnloadModule: "fbdev"
[    13.741] (II) Unloading fbdev
[    13.741] (II) UnloadSubModule: "fbdevhw"
[    13.741] (II) Unloading fbdevhw
[    13.741] (--) Depth 24 pixmap format is 32 bpp
[    13.742] (II) CHROME(0): VIAScreenInit
[    13.742] (II) CHROME(0): Frame Buffer From (0,0) To (1280,32767)
[    13.742] (II) CHROME(0): Using 31967 lines for offscreen memory.
[    13.742] 4096000 bytes of Linear memory allocated at a000000, handle 143133264
[    13.742] 262144 bytes of Linear memory allocated at a3e8000, handle 143113720
[    13.742] 32 bytes of Linear memory allocated at a428000, handle 143113472
[    13.742] 32 bytes of Linear memory allocated at a428080, handle 143111248
[    13.745] (II) CHROME(0): - Visuals set up
[    13.750] (II) CHROME(0): - B & W
[    13.756] (II) CHROME(0): [EXA] Disabling EXA accelerated composite.
[    13.756] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[    13.756] (II) EXA(0): Offscreen pixmap area of 264339456 bytes
[    13.756] (II) EXA(0): Driver registered support for the following operations:
[    13.756] (II)         Solid
[    13.756] (II)         Copy
[    13.756] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[    13.756] (==) CHROME(0): Backing store disabled
[    13.756] (II) CHROME(0): - Backing store set up
[    13.756] (II) CHROME(0): - SW cursor set up
[    13.756] (II) CHROME(0): HWCursor ARGB enabled
[    13.756] 16384 bytes of Linear memory allocated at a428100, handle 143113192
[    13.756] 16384 bytes of Linear memory allocated at a42c100, handle 143113240
[    13.756] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    13.761] (II) CHROME(0): - Def Color map set up
[    13.761] (II) CHROME(0): - Palette loaded
[    13.761] (II) CHROME(0): - Color maps etc. set up
[    13.761] (==) CHROME(0): DPMS enabled
[    13.761] (II) CHROME(0): - DPMS set up
[    13.761] (II) CHROME(0): VIAEnterVT
[    13.761] (II) CHROME(0): VIASave
[    13.761] (II) CHROME(0): Primary
[    13.762] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[    13.762] (II) CHROME(0): Crtc...
[    13.762] (II) CHROME(0): TVSave...
[    13.762] (II) CHROME(0): VIASave
[    13.762] (II) CHROME(0): Primary
[    13.762] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[    13.762] (II) CHROME(0): Crtc...
[    13.762] (II) CHROME(0): TVSave...
[    13.763] (II) CHROME(0): ViaLVDSPower 0
[    13.763] (II) CHROME(0): ViaLCDPower: Off.
[    13.763] (II) CHROME(0): ViaDisplayDisableCRT
[    13.764] (II) CHROME(0): ViaSecondCRTCModeValid
[    13.764] (II) CHROME(0): ViaLVDSPower 0
[    13.764] (II) CHROME(0): ViaLCDPower: Off.
[    13.765] (II) CHROME(0): ViaModeSecondCRTC
[    13.765] (II) CHROME(0): mode: 0x8890158
[    13.765] (II) CHROME(0): mode->name: 0x887bf30
[    13.765] (II) CHROME(0): mode->name: 1280x800
[    13.765] (II) CHROME(0): ViaSecondCRTCSetMode
[    13.765] (II) CHROME(0): Setting up 1280x800
[    13.765] (II) CHROME(0): ViaSetSecondaryFIFO
[    13.765] (II) CHROME(0): ViaSetDotclock to 0x04d04d
[    13.765] (II) CHROME(0): ViaSetUseExternalClock
[    13.765] (II) CHROME(0): ViaSecondDisplayChannelEnable
[    13.765] (II) CHROME(0): ViaDisplayDisableSimultaneous
[    13.765] (II) CHROME(0): VIALoadRgbLut
[    13.765] (II) CHROME(0): ViaLVDSPower 1
[    13.765] (II) CHROME(0): ViaLCDPower: On.
[    13.766] (II) CHROME(0): ViaDisplayDisableCRT
[    13.766] DRM memory allocation failed -6
[    13.767] 635904 bytes of Linear memory allocated at a430100, handle 143113328
[    13.768] (II) CHROME(0): Benchmarking video copy.  Less time is better.
[    13.771] (--) CHROME(0): Timed   libc YUV420 copy... 1388208. Throughput: 341.9 MiB/s.
[    13.774] (--) CHROME(0): Timed kernel YUV420 copy... 1348668. Throughput: 351.9 MiB/s.
[    13.775] (--) CHROME(0): Timed    SSE YUV420 copy... 1182924. Throughput: 401.2 MiB/s.
[    13.777] (--) CHROME(0): Timed    MMX YUV420 copy... 983724. Throughput: 482.5 MiB/s.
[    13.777] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[    13.779] (--) CHROME(0): Timed   MMX2 YUV420 copy... 999504. Throughput: 474.8 MiB/s.
[    13.779] Freed 172163328 (pool 4)
[    13.779] (--) CHROME(0): Using MMX YUV42X copy for video.
[    13.779] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
[    13.779] (II) CHROME(0): - Done
[    13.779] (--) RandR disabled
[    13.801] (II) AIGLX: Screen 0 is not DRI2 capable
[    13.801] (II) AIGLX: Screen 0 is not DRI capable
[    14.074] (II) AIGLX: Loaded and initialized swrast
[    14.074] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    14.076] (II) CHROME(0): Setting screen physical size to 338 x 211
[    14.273] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    14.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    14.274] (**) Power Button: Applying InputClass "Keyboard defaults"
[    14.274] (II) LoadModule: "evdev"
[    14.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    14.279] (II) Module evdev: vendor="X.Org Foundation"
[    14.279] 	compiled for 1.13.0, module version = 2.7.3
[    14.280] 	Module class: X.Org XInput Driver
[    14.280] 	ABI class: X.Org XInput driver, version 18.0
[    14.280] (II) Using input driver 'evdev' for 'Power Button'
[    14.280] (**) Power Button: always reports core events
[    14.280] (**) evdev: Power Button: Device: "/dev/input/event3"
[    14.280] (--) evdev: Power Button: Vendor 0 Product 0x1
[    14.280] (--) evdev: Power Button: Found keys
[    14.280] (II) evdev: Power Button: Configuring as keyboard
[    14.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    14.280] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    14.280] (**) Option "xkb_rules" "evdev"
[    14.280] (**) Option "xkb_model" "pc105"
[    14.280] (**) Option "xkb_layout" "fr,us"
[    14.280] (**) Option "xkb_variant" "oss"
[    14.280] (**) Option "xkb_options" "grp:menu_toggle"
[    14.349] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    14.349] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    14.349] (**) Video Bus: Applying InputClass "Keyboard defaults"
[    14.349] (II) Using input driver 'evdev' for 'Video Bus'
[    14.349] (**) Video Bus: always reports core events
[    14.349] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    14.349] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    14.349] (--) evdev: Video Bus: Found keys
[    14.349] (II) evdev: Video Bus: Configuring as keyboard
[    14.349] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/LNXVIDEO:00/input/input5/event5"
[    14.349] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    14.349] (**) Option "xkb_rules" "evdev"
[    14.349] (**) Option "xkb_model" "pc105"
[    14.349] (**) Option "xkb_layout" "fr,us"
[    14.349] (**) Option "xkb_variant" "oss"
[    14.349] (**) Option "xkb_options" "grp:menu_toggle"
[    14.350] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    14.350] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    14.350] (**) Power Button: Applying InputClass "Keyboard defaults"
[    14.350] (II) Using input driver 'evdev' for 'Power Button'
[    14.350] (**) Power Button: always reports core events
[    14.350] (**) evdev: Power Button: Device: "/dev/input/event1"
[    14.350] (--) evdev: Power Button: Vendor 0 Product 0x1
[    14.350] (--) evdev: Power Button: Found keys
[    14.350] (II) evdev: Power Button: Configuring as keyboard
[    14.350] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    14.350] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    14.350] (**) Option "xkb_rules" "evdev"
[    14.350] (**) Option "xkb_model" "pc105"
[    14.350] (**) Option "xkb_layout" "fr,us"
[    14.351] (**) Option "xkb_variant" "oss"
[    14.351] (**) Option "xkb_options" "grp:menu_toggle"
[    14.351] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    14.351] (II) No input driver specified, ignoring this device.
[    14.351] (II) This device may have been added with another device file.
[    14.352] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    14.352] (II) No input driver specified, ignoring this device.
[    14.352] (II) This device may have been added with another device file.
[    14.352] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    14.352] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    14.352] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard defaults"
[    14.352] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    14.352] (**) AT Translated Set 2 keyboard: always reports core events
[    14.353] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    14.353] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    14.353] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    14.353] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    14.353] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    14.353] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    14.353] (**) Option "xkb_rules" "evdev"
[    14.353] (**) Option "xkb_model" "pc105"
[    14.353] (**) Option "xkb_layout" "fr,us"
[    14.353] (**) Option "xkb_variant" "oss"
[    14.353] (**) Option "xkb_options" "grp:menu_toggle"
[    14.354] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event7)
[    14.354] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    14.354] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    14.354] (**) PS/2 Mouse: always reports core events
[    14.354] (**) evdev: PS/2 Mouse: Device: "/dev/input/event7"
[    14.354] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    14.354] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    14.354] (--) evdev: PS/2 Mouse: Found relative axes
[    14.354] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    14.354] (II) evdev: PS/2 Mouse: Configuring as mouse
[    14.354] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    14.354] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    14.354] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[    14.354] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 10)
[    14.354] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    14.354] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    14.354] (**) PS/2 Mouse: (accel) acceleration profile 0
[    14.354] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    14.354] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    14.355] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[    14.355] (II) No input driver specified, ignoring this device.
[    14.355] (II) This device may have been added with another device file.
[    14.355] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event8)
[    14.355] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    14.355] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    14.355] (II) LoadModule: "synaptics"
[    14.356] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    14.359] (II) Module synaptics: vendor="X.Org Foundation"
[    14.359] 	compiled for 1.13.0, module version = 1.6.2
[    14.359] 	Module class: X.Org XInput Driver
[    14.359] 	ABI class: X.Org XInput driver, version 18.0
[    14.359] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    14.359] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    14.359] (**) Option "Device" "/dev/input/event8"
[    14.360] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[    14.360] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[    14.360] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    14.360] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    14.360] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    14.360] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    14.360] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    14.360] (**) Option "TapButton1" "1"
[    14.360] (**) Option "TapButton2" "2"
[    14.360] (**) Option "TapButton3" "3"
[    14.360] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    14.360] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    14.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[    14.360] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[    14.360] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    14.361] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    14.361] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[    14.361] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    14.361] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    14.361] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    14.361] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    14.361] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    14.361] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    14.361] (II) No input driver specified, ignoring this device.
[    14.361] (II) This device may have been added with another device file.
[    14.362] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    14.362] (II) No input driver specified, ignoring this device.
[    14.362] (II) This device may have been added with another device file.
[    14.368] (II) CHROME(0): ViaLVDSPower 1
[    14.368] (II) CHROME(0): ViaLCDPower: On.
[    28.894] (II) CHROME(0): VIALeaveVT
[    28.894] (II) CHROME(0): ViaLCDPower: On.
[    28.895] (II) CHROME(0): VIARestore
[    28.896] (II) CHROME(0): ViaDisablePrimaryFIFO
[    28.896] (II) CHROME(0): VIARestore
[    28.897] (II) CHROME(0): ViaDisablePrimaryFIFO

Si ça vous inspire quelque chose... Pour ma part je suis franchement à bout de ressource. Cordialement,

---- EDIT ----
Bon, ben, je laisse tomber.
De toutes façon je n'ai plus accès à la machine en question alors...
--------------

Archlinux.fr [Forums]

[video] Problème de driver openchrome/vesa (abandonné)

[video] Problème de driver openchrome/vesa (abandonné)

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa

Re: [video] Problème de driver openchrome/vesa