Ma machine est un portable Dell Inspiron 17 pouces équipé de la carte suivante:
Code : Tout sélectionner
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 650M] (rev ff)Code : Tout sélectionner
libGL: screen 0 does not appear to be DRI2 capable
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/swrast_dri.so
libGL error: failed to load driver: swrast
Direct3D9 is not available without OpenGL.
libGL: screen 0 does not appear to be DRI2 capable
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/swrast_dri.so
libGL error: failed to load driver: swrast
Direct3D9 is not available without OpenGL.Je suis en x86_64. Les paquets suivants sont installés et à jour:
bumblebee
lib32-nvidia-utils-bumblebee
nvidia-bumblebee
nvidia-utils-bumblebee
libgl
lib32-libgl
Je n'ai pas de /etc/X11/xorg.conf (ça marchait sans avant). Mon /etc/bumblebee/xorg.conf.nvidia :
Code : Tout sélectionner
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "CRT"
EndSectionCode : Tout sélectionner
[ 1208.002]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 1208.002] X Protocol Version 11, Revision 0
[ 1208.002] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 1208.002] Current Operating System: Linux arch-inspiron17-denis 3.6.5-1-ARCH #1 SMP PREEMPT Wed Oct 31 20:57:39 CET 2012 x86_64
[ 1208.002] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d6144970-e90b-425e-a015-d0192ce128ea ro quiet
[ 1208.002] Build Date: 19 October 2012 03:54:56PM
[ 1208.002]
[ 1208.002] Current version of pixman: 0.26.2
[ 1208.002] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1208.002] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1208.002] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Nov 4 15:43:00 2012
[ 1208.002] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 1208.002] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1208.002] (==) ServerLayout "Layout0"
[ 1208.002] (==) No screen section available. Using defaults.
[ 1208.002] (**) |-->Screen "Default Screen Section" (0)
[ 1208.002] (**) | |-->Monitor "<default monitor>"
[ 1208.003] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1208.003] (**) | |-->Device "Device1"
[ 1208.003] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1208.003] (**) Option "AutoAddDevices" "false"
[ 1208.003] (**) Not automatically adding devices
[ 1208.003] (==) Automatically enabling devices
[ 1208.003] (==) Automatically adding GPU devices
[ 1208.003] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1208.003] Entry deleted from font path.
[ 1208.003] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1208.003] Entry deleted from font path.
[ 1208.003] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1208.003] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1208.003] Entry deleted from font path.
[ 1208.003] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1208.003] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1208.003] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
[ 1208.003] (==) |-->Input Device "<default pointer>"
[ 1208.003] (==) |-->Input Device "<default keyboard>"
[ 1208.003] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 1208.003] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 1208.003] (II) Loader magic: 0x7fcc20
[ 1208.003] (II) Module ABI versions:
[ 1208.003] X.Org ANSI C Emulation: 0.4
[ 1208.003] X.Org Video Driver: 13.0
[ 1208.003] X.Org XInput driver : 18.0
[ 1208.003] X.Org Server Extension : 7.0
[ 1208.004] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1208.004] setversion 1.4 failed
[ 1208.005] (--) PCI:*(0:1:0:0) 10de:0fd1:1028:0578 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 1208.005] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1208.005] Initializing built-in extension Generic Event Extension
[ 1208.005] Initializing built-in extension SHAPE
[ 1208.005] Initializing built-in extension MIT-SHM
[ 1208.005] Initializing built-in extension XInputExtension
[ 1208.005] Initializing built-in extension XTEST
[ 1208.005] Initializing built-in extension BIG-REQUESTS
[ 1208.005] Initializing built-in extension SYNC
[ 1208.005] Initializing built-in extension XKEYBOARD
[ 1208.005] Initializing built-in extension XC-MISC
[ 1208.005] Initializing built-in extension SECURITY
[ 1208.005] Initializing built-in extension XINERAMA
[ 1208.005] Initializing built-in extension XFIXES
[ 1208.005] Initializing built-in extension RENDER
[ 1208.006] Initializing built-in extension RANDR
[ 1208.006] Initializing built-in extension COMPOSITE
[ 1208.006] Initializing built-in extension DAMAGE
[ 1208.006] Initializing built-in extension MIT-SCREEN-SAVER
[ 1208.006] Initializing built-in extension DOUBLE-BUFFER
[ 1208.006] Initializing built-in extension RECORD
[ 1208.006] Initializing built-in extension DPMS
[ 1208.006] Initializing built-in extension X-Resource
[ 1208.006] Initializing built-in extension XVideo
[ 1208.006] Initializing built-in extension XVideo-MotionCompensation
[ 1208.006] Initializing built-in extension XFree86-VidModeExtension
[ 1208.006] Initializing built-in extension XFree86-DGA
[ 1208.006] Initializing built-in extension XFree86-DRI
[ 1208.006] Initializing built-in extension DRI2
[ 1208.006] (II) LoadModule: "glx"
[ 1208.006] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
[ 1208.012] (II) Module glx: vendor="NVIDIA Corporation"
[ 1208.012] compiled for 4.0.2, module version = 1.0.0
[ 1208.012] Module class: X.Org Server Extension
[ 1208.012] (II) NVIDIA GLX Module 304.60 Sun Oct 14 20:44:54 PDT 2012
[ 1208.012] Loading extension GLX
[ 1208.012] (II) LoadModule: "nvidia"
[ 1208.012] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1208.012] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1208.012] compiled for 4.0.2, module version = 1.0.0
[ 1208.012] Module class: X.Org Video Driver
[ 1208.012] (II) LoadModule: "mouse"
[ 1208.012] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 1208.012] (II) Module mouse: vendor="X.Org Foundation"
[ 1208.012] compiled for 1.13.0, module version = 1.8.1
[ 1208.012] Module class: X.Org XInput Driver
[ 1208.012] ABI class: X.Org XInput driver, version 18.0
[ 1208.012] (II) LoadModule: "kbd"
[ 1208.012] (WW) Warning, couldn't open module kbd
[ 1208.012] (II) UnloadModule: "kbd"
[ 1208.012] (II) Unloading kbd
[ 1208.012] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 1208.013] (II) NVIDIA dlloader X Driver 304.60 Sun Oct 14 20:24:42 PDT 2012
[ 1208.013] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1208.013] (--) using VT number 7
[ 1208.013] (II) Loading sub module "fb"
[ 1208.013] (II) LoadModule: "fb"
[ 1208.013] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1208.013] (II) Module fb: vendor="X.Org Foundation"
[ 1208.013] compiled for 1.13.0, module version = 1.0.0
[ 1208.013] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1208.013] (II) Loading sub module "wfb"
[ 1208.013] (II) LoadModule: "wfb"
[ 1208.013] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1208.013] (II) Module wfb: vendor="X.Org Foundation"
[ 1208.013] compiled for 1.13.0, module version = 1.0.0
[ 1208.013] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1208.013] (II) Loading sub module "ramdac"
[ 1208.013] (II) LoadModule: "ramdac"
[ 1208.013] (II) Module "ramdac" already built-in
[ 1208.013] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1208.013] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 1208.013] (==) NVIDIA(0): RGB weight 888
[ 1208.013] (==) NVIDIA(0): Default visual is TrueColor
[ 1208.013] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1208.013] (**) NVIDIA(0): Option "NoLogo" "true"
[ 1208.013] (**) NVIDIA(0): Option "UseEDID" "false"
[ 1208.013] (**) NVIDIA(0): Option "ConnectedMonitor" "CRT"
[ 1208.013] (**) NVIDIA(0): Enabling 2D acceleration
[ 1208.013] (**) NVIDIA(0): ConnectedMonitor string: "CRT"
[ 1208.013] (**) NVIDIA(0): Ignoring EDIDs
[ 1208.775] (**) NVIDIA(GPU-0): Using ConnectedMonitor string "CRT-0".
[ 1208.775] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 1208.776] (II) NVIDIA(0): NVIDIA GPU GeForce GT 650M (GK107) at PCI:1:0:0 (GPU-0)
[ 1208.776] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 1208.776] (--) NVIDIA(0): VideoBIOS: 80.07.35.00.0c
[ 1208.776] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1208.776] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 1208.779] (--) NVIDIA(0): Valid display device(s) on GeForce GT 650M at PCI:1:0:0
[ 1208.779] (--) NVIDIA(0): CRT-0 (connected)
[ 1208.779] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 1208.779] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1208.779] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 1208.779] (**) NVIDIA(0): all display devices.)
[ 1208.782] (==) NVIDIA(0):
[ 1208.782] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 1208.782] (==) NVIDIA(0): will be used as the requested mode.
[ 1208.782] (==) NVIDIA(0):
[ 1208.782] (II) NVIDIA(0): Validated MetaModes:
[ 1208.782] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 1208.782] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 1208.787] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 1208.787] (WW) NVIDIA(0): from CRT-0's EDID.
[ 1208.787] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 1208.787] (--) Depth 24 pixmap format is 32 bpp
[ 1208.787] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 1208.787] (II) NVIDIA: access.
[ 1208.890] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1208.890] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1208.890] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1208.890] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1208.890] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1208.890] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1208.890] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1208.890] (II) NVIDIA(0): Config Options in the README.
[ 1208.895] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 1208.925] Loading extension NV-GLX
[ 1208.942] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1208.942] (==) NVIDIA(0): Backing store disabled
[ 1208.942] (==) NVIDIA(0): Silken mouse enabled
[ 1208.942] (==) NVIDIA(0): DPMS enabled
[ 1208.943] Loading extension NV-CONTROL
[ 1208.943] Loading extension XINERAMA
[ 1208.943] (II) Loading sub module "dri2"
[ 1208.943] (II) LoadModule: "dri2"
[ 1208.943] (II) Module "dri2" already built-in
[ 1208.943] (II) NVIDIA(0): [DRI2] Setup complete
[ 1208.943] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1208.943] (--) RandR disabled
[ 1208.948] (II) Initializing extension GLX
[ 1208.983] (II) Using input driver 'mouse' for '<default pointer>'
[ 1208.983] (**) Option "CorePointer" "on"
[ 1208.983] (**) <default pointer>: always reports core events
[ 1208.983] (WW) <default pointer>: No Device specified, looking for one...
[ 1208.983] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 1208.983] (--) <default pointer>: Device: "/dev/input/mice"
[ 1208.983] (==) <default pointer>: Protocol: "Auto"
[ 1208.983] (**) <default pointer>: always reports core events
[ 1208.983] (**) Option "Device" "/dev/input/mice"
[ 1208.984] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 1208.984] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 1208.984] (**) <default pointer>: Buttons: 9
[ 1208.984] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 1208.984] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 1208.984] (**) <default pointer>: (accel) acceleration profile 0
[ 1208.984] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 1208.984] (**) <default pointer>: (accel) acceleration threshold: 4
[ 1208.984] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 1209.276] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 1209.276] (II) LoadModule: "kbd"
[ 1209.277] (WW) Warning, couldn't open module kbd
[ 1209.277] (II) UnloadModule: "kbd"
[ 1209.277] (II) Unloading kbd
[ 1209.277] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 1209.277] (EE) No input driver matching `kbd'
[ 1209.279] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 1209.279] (II) AutoAddDevices is off - not adding device.
[ 1209.279] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 1209.280] (II) AutoAddDevices is off - not adding device.
[ 1209.280] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 1209.280] (II) AutoAddDevices is off - not adding device.
[ 1209.280] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1209.280] (II) AutoAddDevices is off - not adding device.
[ 1209.280] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 1209.280] (II) AutoAddDevices is off - not adding device.
[ 1209.281] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 1209.281] (II) AutoAddDevices is off - not adding device.
[ 1209.281] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1209.281] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1209.281] setversion 1.4 failed
[ 1209.282] (II) config/udev: Adding input device Logitech Logitech G930 Headset (/dev/input/event7)
[ 1209.282] (II) AutoAddDevices is off - not adding device.
[ 1209.282] (II) config/udev: Adding input device DATACOMP SteelS쀁̄Љ̒DATA (/dev/input/event8)
[ 1209.282] (II) AutoAddDevices is off - not adding device.
[ 1209.282] (II) config/udev: Adding input device DATACOMP SteelS쀁̄Љ̒DATA (/dev/input/event9)
[ 1209.282] (II) AutoAddDevices is off - not adding device.
[ 1209.283] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 1209.283] (II) AutoAddDevices is off - not adding device.
[ 1209.283] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 1209.283] (II) AutoAddDevices is off - not adding device.
[ 1209.284] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 1209.284] (II) AutoAddDevices is off - not adding device.
[ 1209.284] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event12)
[ 1209.284] (II) AutoAddDevices is off - not adding device.
[ 1209.284] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event16)
[ 1209.284] (II) AutoAddDevices is off - not adding device.
[ 1209.285] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[ 1209.285] (II) AutoAddDevices is off - not adding device.
[ 1209.285] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event18)
[ 1209.285] (II) AutoAddDevices is off - not adding device.
[ 1209.285] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event19)
[ 1209.285] (II) AutoAddDevices is off - not adding device.
[ 1209.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1209.286] (II) AutoAddDevices is off - not adding device.
[ 1209.286] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event13)
[ 1209.286] (II) AutoAddDevices is off - not adding device.
[ 1209.287] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 1209.287] (II) AutoAddDevices is off - not adding device.
[ 1209.287] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 1209.287] (II) AutoAddDevices is off - not adding device.
[ 1209.287] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[ 1209.287] (II) AutoAddDevices is off - not adding device.
[ 1223.115] (II) UnloadModule: "mouse"
[ 1223.169] Server terminated successfully (0). Closing log file.Voilà, j'ai cherché des réponses partout sur le net sans rien trouver. J'ai tenté d'activer manuellement DRI2 dans xorg.conf.nvidia, ça ne change rien. Je suis à court de solutions, donc si quelqu'un peut m'aider...
Merci!
