[Modem USB] comment installer un Alcatel Speedtouch ? (raie)
-
- Maître du Kyudo
- Messages : 2073
- Inscription : sam. 16 sept. 2006, 10:39
- Localisation : 31 - Toulouse Nord
[Modem USB] comment installer un Alcatel Speedtouch ? (raie)
Bonjour,
Je n'arrive pas à installer les bons modules, ou configurer correctement le ppp pour ce modem (la raie verte ).
J'ai suivi le tuto de ZeLinux, en l'adaptant à notre distrib.
Le problème, c'est que j'ai un "modem hangup".
Est-ce que quelqu'un ici se connecte avec un modem usb ? Si oui, j'aimerais connaitre votre configuration, SVP...
Merci !
Je n'arrive pas à installer les bons modules, ou configurer correctement le ppp pour ce modem (la raie verte ).
J'ai suivi le tuto de ZeLinux, en l'adaptant à notre distrib.
Le problème, c'est que j'ai un "modem hangup".
Est-ce que quelqu'un ici se connecte avec un modem usb ? Si oui, j'aimerais connaitre votre configuration, SVP...
Merci !
- lamisere
- archer
- Messages : 133
- Inscription : jeu. 14 sept. 2006, 21:10
- Localisation : Proximité de CAEN
bon alors:
dans /etc/ppp
j'ai mis mon mot de passe et identifiant dans chap-secrets et dans pap-secrets
ensuite dans /etc/ppp//peers
j'ai mis user "monidentifiant"
mru 1492
mtu 1492
noipdefault
defaultroute
usepeerdns
noauth
#ipcp-accept-remote
#ipcp-accept-local
nobsdcomp
nodeflate
nopcomp
novj
novjccomp
noaccomp -am
persist
updetach
pty "/usr/local/sbin/fctStartAdsl -i"
/etc/.rc.conf
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="fr_FR.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Paris"
KEYMAP="fr"
CONSOLEFONT="lat9w-16"
CONSOLEMAP="8859-15"
USECOLOR="yes"
CONSOLETRANSLATION="8859-15_to_uni"
#
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=(eagle-usb)
#
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
#
MODULES=(usbserial usblp usbcore usblp pppoatm ppp_async usbatm
ueagle_atm snd-via82xx)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
#
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
HOSTNAME="myhost"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
#
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
#
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#INTERFACES=(lo eth0="dhcp")
#
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
#
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network-profiles
#
#NET_PROFILES=(main)
#
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(ppp pppd network syslog-ng @cupsd @cups autofs udev alsa
hwd
!hotplug kdm !pcmcia !netfs crond connectionadsl)
# End of file
et puis dans /usr/bin/connectionadsl
#!/bin/bash
pppd call ueagle-atm
j'ai placé "conectionadsl" dans le rc.conf pour lancer la connection au démarrage mais cela ne fonctionne pas...donc pour me connecter je fais "sudo connectionadsl"
Voila je ne pense pas avoir oublié qq chose [/b]
dans /etc/ppp
j'ai mis mon mot de passe et identifiant dans chap-secrets et dans pap-secrets
ensuite dans /etc/ppp//peers
j'ai mis user "monidentifiant"
mru 1492
mtu 1492
noipdefault
defaultroute
usepeerdns
noauth
#ipcp-accept-remote
#ipcp-accept-local
nobsdcomp
nodeflate
nopcomp
novj
novjccomp
noaccomp -am
persist
updetach
pty "/usr/local/sbin/fctStartAdsl -i"
/etc/.rc.conf
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="fr_FR.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Paris"
KEYMAP="fr"
CONSOLEFONT="lat9w-16"
CONSOLEMAP="8859-15"
USECOLOR="yes"
CONSOLETRANSLATION="8859-15_to_uni"
#
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=(eagle-usb)
#
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
#
MODULES=(usbserial usblp usbcore usblp pppoatm ppp_async usbatm
ueagle_atm snd-via82xx)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
#
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
HOSTNAME="myhost"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
#
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
#
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#INTERFACES=(lo eth0="dhcp")
#
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
#
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network-profiles
#
#NET_PROFILES=(main)
#
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(ppp pppd network syslog-ng @cupsd @cups autofs udev alsa
hwd
!hotplug kdm !pcmcia !netfs crond connectionadsl)
# End of file
et puis dans /usr/bin/connectionadsl
#!/bin/bash
pppd call ueagle-atm
j'ai placé "conectionadsl" dans le rc.conf pour lancer la connection au démarrage mais cela ne fonctionne pas...donc pour me connecter je fais "sudo connectionadsl"
Voila je ne pense pas avoir oublié qq chose [/b]
-
- Maître du Kyudo
- Messages : 2073
- Inscription : sam. 16 sept. 2006, 10:39
- Localisation : 31 - Toulouse Nord
Je progresse, mais toujorus pas de réponse...
J'ai suivi le tuto du site anglophone, voici ce que me sort dmesg :
Une idée ?
J'ai suivi le tuto du site anglophone, voici ce que me sort dmesg :
Une recherche sur Google ne m'aide pas vraiment...usb 1-2: new full speed USB device using uhci_hcd and address 7
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: reset full speed USB device using uhci_hcd and address 7
usbcore: registered new driver speedtch
speedtch 1-2:1.0: found stage 1 firmware speedtch-1.bin
speedtch 1-2:1.0: found stage 2 firmware speedtch-2.bin
speedtch 1-2:1.0: speedtch_upload_firmware: read BLOCK2 from modem failed (-110)!
speedtch 1-2:1.0: speedtch_heavy_init: firmware upload failed (-110)!
Une idée ?