C'est bien le cas, parce que tout s'affiche normalement en LiveUSB Ubuntu ou sous Windows, et j'ai vérifié plus d'une fois.^^
Xorg.0.log
Code : Tout sélectionner
[ 3.595] (II) [KMS] Kernel modesetting enabled.
[ 3.595] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.595] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 3.595] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 3.595] (==) RADEON(0): Default visual is TrueColor
[ 3.595] (==) RADEON(0): RGB weight 888
[ 3.595] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 3.595] (--) RADEON(0): Chipset: "CAICOS" (ChipID = 0x6779)
[ 3.596] (II) Loading sub module "dri2"
[ 3.596] (II) LoadModule: "dri2"
[ 3.596] (II) Module "dri2" already built-in
[ 3.596] (II) Loading sub module "exa"
[ 3.596] (II) LoadModule: "exa"
[ 3.596] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 3.596] (II) Module exa: vendor="X.Org Foundation"
[ 3.596] compiled for 1.15.0, module version = 2.6.0
[ 3.596] ABI class: X.Org Video Driver, version 15.0
[ 3.597] (II) RADEON(0): KMS Color Tiling: enabled
[ 3.597] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 3.597] (II) RADEON(0): KMS Pageflipping: enabled
[ 3.597] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 3.599] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 3.601] (II) RADEON(0): Output DVI-0 has no monitor section
[ 3.611] (II) RADEON(0): Output VGA-0 has no monitor section
[ 3.613] (II) RADEON(0): EDID for output HDMI-0
[ 3.616] (II) RADEON(0): EDID for output DVI-0
[ 3.628] (II) RADEON(0): EDID for output VGA-0
[ 3.628] (II) RADEON(0): Printing probed modes for output VGA-0
[ 3.628] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 3.628] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 3.628] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 3.628] (II) RADEON(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 3.628] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 3.628] (II) RADEON(0): Output HDMI-0 disconnected
[ 3.628] (II) RADEON(0): Output DVI-0 disconnected
[ 3.628] (II) RADEON(0): Output VGA-0 connected
[ 3.628] (II) RADEON(0): Using exact sizes for initial modes
[ 3.628] (II) RADEON(0): Output VGA-0 using initial mode 1024x768
[ 3.628] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3.628] (II) RADEON(0): mem size init: gart size :3fdee000 vram size: s:40000000 visible:3fcc0000
[ 3.628] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 3.628] (==) RADEON(0): DPI set to (96, 96)
[ 3.628] (II) Loading sub module "fb"
[ 3.628] (II) LoadModule: "fb"
[ 3.629] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3.630] (II) Module fb: vendor="X.Org Foundation"
[ 3.630] compiled for 1.15.0, module version = 1.0.0
[ 3.630] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.630] (II) Loading sub module "ramdac"
[ 3.630] (II) LoadModule: "ramdac"
[ 3.630] (II) Module "ramdac" already built-in
[ 3.630] (--) Depth 24 pixmap format is 32 bpp
[ 3.631] (II) RADEON(0): [DRI2] Setup complete
[ 3.631] (II) RADEON(0): [DRI2] DRI driver: r600
[ 3.631] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 3.631] (II) RADEON(0): Front buffer size: 3072K
[ 3.631] (II) RADEON(0): VRAM usage limit set to 937900K
[ 3.632] (==) RADEON(0): Backing store enabled
[ 3.632] (II) RADEON(0): Direct rendering enabled
[ 3.632] (II) EXA(0): Driver allocated offscreen pixmaps
[ 3.632] (II) EXA(0): Driver registered support for the following operations:
[ 3.632] (II) Solid
[ 3.632] (II) Copy
[ 3.632] (II) Composite (RENDER acceleration)
[ 3.632] (II) UploadToScreen
[ 3.632] (II) DownloadFromScreen
[ 3.633] (II) RADEON(0): Acceleration enabled
[ 3.633] (==) RADEON(0): DPMS enabled
[ 3.633] (==) RADEON(0): Silken mouse enabled
[ 3.633] (II) RADEON(0): Set up textured video
[ 3.633] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 3.633] (II) RADEON(0): [XvMC] Extension initialized.
[ 3.633] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.634] (--) RandR disabled
[ 3.703] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.703] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.703] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.703] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3.703] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.703] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.703] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.703] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.703] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.704] (II) AIGLX: Loaded and initialized r600
[ 3.704] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.706] (II) RADEON(0): Setting screen physical size to 270 x 203
[ 3.767] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3.767] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.767] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 3.767] (II) LoadModule: "evdev"
[ 3.767] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.769] (II) Module evdev: vendor="X.Org Foundation"
[ 3.769] compiled for 1.15.0, module version = 2.8.2
[ 3.769] Module class: X.Org XInput Driver
[ 3.769] ABI class: X.Org XInput driver, version 20.0
[ 3.769] (II) Using input driver 'evdev' for 'Power Button'
[ 3.769] (**) Power Button: always reports core events
[ 3.769] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 3.769] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.769] (--) evdev: Power Button: Found keys
[ 3.769] (II) evdev: Power Button: Configuring as keyboard
[ 3.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 3.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.769] (**) Option "xkb_rules" "evdev"
[ 3.769] (**) Option "xkb_model" "pc104"
[ 3.769] (**) Option "xkb_layout" "fr"
[ 3.769] (**) Option "xkb_variant" "latin9"
[ 3.797] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3.797] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.797] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 3.797] (II) Using input driver 'evdev' for 'Power Button'
[ 3.797] (**) Power Button: always reports core events
[ 3.797] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 3.797] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.797] (--) evdev: Power Button: Found keys
[ 3.797] (II) evdev: Power Button: Configuring as keyboard
[ 3.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 3.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3.797] (**) Option "xkb_rules" "evdev"
[ 3.797] (**) Option "xkb_model" "pc104"
[ 3.797] (**) Option "xkb_layout" "fr"
[ 3.797] (**) Option "xkb_variant" "latin9"
[ 3.797] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.797] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event7)
[ 3.797] (II) No input driver specified, ignoring this device.
[ 3.797] (II) This device may have been added with another device file.
[ 3.798] (II) config/udev: Adding input device Mouse USB Laser Mouse (/dev/input/event9)
[ 3.798] (**) Mouse USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 3.798] (II) Using input driver 'evdev' for 'Mouse USB Laser Mouse'
[ 3.798] (**) Mouse USB Laser Mouse: always reports core events
[ 3.798] (**) evdev: Mouse USB Laser Mouse: Device: "/dev/input/event9"
[ 3.798] (--) evdev: Mouse USB Laser Mouse: Vendor 0xffc0 Product 0x40
[ 3.798] (--) evdev: Mouse USB Laser Mouse: Found 9 mouse buttons
[ 3.798] (--) evdev: Mouse USB Laser Mouse: Found scroll wheel(s)
[ 3.798] (--) evdev: Mouse USB Laser Mouse: Found relative axes
[ 3.798] (--) evdev: Mouse USB Laser Mouse: Found x and y relative axes
[ 3.798] (II) evdev: Mouse USB Laser Mouse: Configuring as mouse
[ 3.798] (II) evdev: Mouse USB Laser Mouse: Adding scrollwheel support
[ 3.798] (**) evdev: Mouse USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 3.798] (**) evdev: Mouse USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input12/event9"
[ 3.798] (II) XINPUT: Adding extended input device "Mouse USB Laser Mouse" (type: MOUSE, id 8)
[ 3.798] (II) evdev: Mouse USB Laser Mouse: initialized for relative axes.
[ 3.798] (**) Mouse USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 3.798] (**) Mouse USB Laser Mouse: (accel) acceleration profile 0
[ 3.798] (**) Mouse USB Laser Mouse: (accel) acceleration factor: 2.000
[ 3.798] (**) Mouse USB Laser Mouse: (accel) acceleration threshold: 4
[ 3.798] (II) config/udev: Adding input device Mouse USB Laser Mouse (/dev/input/mouse0)
[ 3.798] (II) No input driver specified, ignoring this device.
[ 3.798] (II) This device may have been added with another device file.
[ 3.799] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event10)
[ 3.799] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.799] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 3.799] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 3.799] (**) Logitech USB Keyboard: always reports core events
[ 3.799] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event10"
[ 3.799] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 3.799] (--) evdev: Logitech USB Keyboard: Found keys
[ 3.799] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 3.799] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/input/input13/event10"
[ 3.799] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 3.799] (**) Option "xkb_rules" "evdev"
[ 3.799] (**) Option "xkb_model" "pc104"
[ 3.799] (**) Option "xkb_layout" "fr"
[ 3.799] (**) Option "xkb_variant" "latin9"
[ 3.799] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event11)
[ 3.799] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.799] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 3.799] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 3.799] (**) Logitech USB Keyboard: always reports core events
[ 3.799] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event11"
[ 3.799] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 3.799] (--) evdev: Logitech USB Keyboard: Found 1 mouse buttons
[ 3.799] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 3.799] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 3.799] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 3.799] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 3.799] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 3.799] (--) evdev: Logitech USB Keyboard: Found keys
[ 3.799] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 3.799] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 3.799] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 3.799] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 3.800] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/input/input14/event11"
[ 3.800] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 3.800] (**) Option "xkb_rules" "evdev"
[ 3.800] (**) Option "xkb_model" "pc104"
[ 3.800] (**) Option "xkb_layout" "fr"
[ 3.800] (**) Option "xkb_variant" "latin9"
[ 3.800] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 3.800] (WW) evdev: Logitech USB Keyboard: ignoring absolute axes.
[ 3.800] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 3.800] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 3.800] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 3.800] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 3.800] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
[ 3.800] (II) No input driver specified, ignoring this device.
[ 3.800] (II) This device may have been added with another device file.
[ 3.800] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event5)
[ 3.800] (II) No input driver specified, ignoring this device.
[ 3.800] (II) This device may have been added with another device file.
[ 3.801] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 3.801] (II) No input driver specified, ignoring this device.
[ 3.801] (II) This device may have been added with another device file.
[ 3.801] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
[ 3.801] (II) No input driver specified, ignoring this device.
[ 3.801] (II) This device may have been added with another device file.
[ 3.801] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
[ 3.801] (II) No input driver specified, ignoring this device.
[ 3.801] (II) This device may have been added with another device file.
[ 3.801] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 3.801] (II) No input driver specified, ignoring this device.
[ 3.801] (II) This device may have been added with another device file.
[ 3.805] (II) config/udev: removing device Mouse USB Laser Mouse
[ 3.836] (II) evdev: Mouse USB Laser Mouse: Close
[ 3.836] (II) UnloadModule: "evdev"
[ 3.837] (II) config/udev: Adding input device Mouse USB Laser Mouse (/dev/input/event9)
[ 3.837] (**) Mouse USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 3.837] (II) Using input driver 'evdev' for 'Mouse USB Laser Mouse'
[ 3.837] (**) Mouse USB Laser Mouse: always reports core events
[ 3.837] (**) evdev: Mouse USB Laser Mouse: Device: "/dev/input/event9"
[ 3.837] (--) evdev: Mouse USB Laser Mouse: Vendor 0xffc0 Product 0x40
[ 3.837] (--) evdev: Mouse USB Laser Mouse: Found 9 mouse buttons
[ 3.837] (--) evdev: Mouse USB Laser Mouse: Found scroll wheel(s)
[ 3.837] (--) evdev: Mouse USB Laser Mouse: Found relative axes
[ 3.837] (--) evdev: Mouse USB Laser Mouse: Found x and y relative axes
[ 3.837] (II) evdev: Mouse USB Laser Mouse: Configuring as mouse
[ 3.837] (II) evdev: Mouse USB Laser Mouse: Adding scrollwheel support
[ 3.837] (**) evdev: Mouse USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 3.837] (**) evdev: Mouse USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.837] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input12/event9"
[ 3.837] (II) XINPUT: Adding extended input device "Mouse USB Laser Mouse" (type: MOUSE, id 8)
[ 3.838] (II) evdev: Mouse USB Laser Mouse: initialized for relative axes.
[ 3.838] (**) Mouse USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 3.838] (**) Mouse USB Laser Mouse: (accel) acceleration profile 0
[ 3.838] (**) Mouse USB Laser Mouse: (accel) acceleration factor: 2.000
[ 3.838] (**) Mouse USB Laser Mouse: (accel) acceleration threshold: 4
[ 3.839] (II) config/udev: Adding input device Mouse USB Laser Mouse (/dev/input/mouse0)
[ 3.839] (II) No input driver specified, ignoring this device.
[ 3.839] (II) This device may have been added with another device file.
[ 3.839] (II) config/udev: removing device Logitech USB Keyboard
[ 3.876] (II) evdev: Logitech USB Keyboard: Close
[ 3.876] (II) UnloadModule: "evdev"
[ 3.877] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event10)
[ 3.877] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.877] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 3.877] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 3.877] (**) Logitech USB Keyboard: always reports core events
[ 3.877] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event10"
[ 3.877] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 3.877] (--) evdev: Logitech USB Keyboard: Found keys
[ 3.877] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 3.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/input/input13/event10"
[ 3.877] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 3.877] (**) Option "xkb_rules" "evdev"
[ 3.877] (**) Option "xkb_model" "pc104"
[ 3.877] (**) Option "xkb_layout" "fr"
[ 3.877] (**) Option "xkb_variant" "latin9"
[ 3.879] (II) config/udev: removing device Logitech USB Keyboard
[ 3.903] (II) evdev: Logitech USB Keyboard: Close
[ 3.903] (II) UnloadModule: "evdev"
[ 3.904] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event11)
[ 3.904] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.904] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 3.904] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 3.904] (**) Logitech USB Keyboard: always reports core events
[ 3.904] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event11"
[ 3.904] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 3.904] (--) evdev: Logitech USB Keyboard: Found 1 mouse buttons
[ 3.904] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 3.904] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 3.904] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 3.904] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 3.904] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 3.904] (--) evdev: Logitech USB Keyboard: Found keys
[ 3.904] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 3.904] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 3.904] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 3.904] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 3.904] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.904] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/input/input14/event11"
[ 3.904] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 3.904] (**) Option "xkb_rules" "evdev"
[ 3.904] (**) Option "xkb_model" "pc104"
[ 3.904] (**) Option "xkb_layout" "fr"
[ 3.904] (**) Option "xkb_variant" "latin9"
[ 3.905] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 3.905] (WW) evdev: Logitech USB Keyboard: ignoring absolute axes.
[ 3.905] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 3.905] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 3.905] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 3.905] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 3.906] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:05:00.0/drm/card0 /dev/dri/card0
[ 3.906] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/0000:05:00.0/drm/card0
[ 3.906] failed to find screen to remove
[ 3.906] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.906] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:05:00.0/drm/card0/card0-HDMI-A-1 (null)
[ 3.906] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:05:00.0/drm/card0/card0-DVI-D-1 (null)
[ 3.906] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:05:00.0/drm/card0/card0-VGA-1 (null)
Xorg.1.log
Code : Tout sélectionner
1260.007] (II) DownloadFromScreen
[ 1260.007] (II) RADEON(0): Acceleration enabled
[ 1260.007] (==) RADEON(0): DPMS enabled
[ 1260.007] (==) RADEON(0): Silken mouse enabled
[ 1260.007] (II) RADEON(0): Set up textured video
[ 1260.007] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 1260.007] (II) RADEON(0): [XvMC] Extension initialized.
[ 1260.007] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1260.007] (--) RandR disabled
[ 1260.027] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1260.027] (II) AIGLX: enabled GLX_ARB_create_context
[ 1260.027] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1260.027] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1260.027] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1260.027] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1260.027] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1260.027] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1260.027] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1260.027] (II) AIGLX: Loaded and initialized r600
[ 1260.027] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1260.028] (II) RADEON(0): Setting screen physical size to 381 x 238
[ 1260.058] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1260.059] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1260.059] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 1260.059] (II) LoadModule: "evdev"
[ 1260.059] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1260.059] (II) Module evdev: vendor="X.Org Foundation"
[ 1260.059] compiled for 1.15.0, module version = 2.8.2
[ 1260.059] Module class: X.Org XInput Driver
[ 1260.059] ABI class: X.Org XInput driver, version 20.0
[ 1260.059] (II) Using input driver 'evdev' for 'Power Button'
[ 1260.059] (**) Power Button: always reports core events
[ 1260.059] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 1260.059] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1260.059] (--) evdev: Power Button: Found keys
[ 1260.059] (II) evdev: Power Button: Configuring as keyboard
[ 1260.059] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[ 1260.059] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1260.059] (**) Option "xkb_rules" "evdev"
[ 1260.059] (**) Option "xkb_model" "pc104"
[ 1260.059] (**) Option "xkb_layout" "fr"
[ 1260.059] (**) Option "xkb_variant" "latin9"
[ 1260.086] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1260.086] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1260.086] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 1260.086] (II) Using input driver 'evdev' for 'Power Button'
[ 1260.086] (**) Power Button: always reports core events
[ 1260.086] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1260.086] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1260.086] (--) evdev: Power Button: Found keys
[ 1260.086] (II) evdev: Power Button: Configuring as keyboard
[ 1260.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event3"
[ 1260.087] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1260.087] (**) Option "xkb_rules" "evdev"
[ 1260.087] (**) Option "xkb_model" "pc104"
[ 1260.087] (**) Option "xkb_layout" "fr"
[ 1260.087] (**) Option "xkb_variant" "latin9"
[ 1260.087] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1260.087] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1260.087] setversion 1.4 failed: Permission denied
[ 1260.087] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[ 1260.087] (II) No input driver specified, ignoring this device.
[ 1260.087] (II) This device may have been added with another device file.
[ 1260.087] (II) config/udev: Adding input device Mouse USB Laser Mouse (/dev/input/event2)
[ 1260.087] (**) Mouse USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 1260.087] (II) Using input driver 'evdev' for 'Mouse USB Laser Mouse'
[ 1260.087] (**) Mouse USB Laser Mouse: always reports core events
[ 1260.087] (**) evdev: Mouse USB Laser Mouse: Device: "/dev/input/event2"
[ 1260.087] (--) evdev: Mouse USB Laser Mouse: Vendor 0xffc0 Product 0x40
[ 1260.087] (--) evdev: Mouse USB Laser Mouse: Found 9 mouse buttons
[ 1260.087] (--) evdev: Mouse USB Laser Mouse: Found scroll wheel(s)
[ 1260.087] (--) evdev: Mouse USB Laser Mouse: Found relative axes
[ 1260.087] (--) evdev: Mouse USB Laser Mouse: Found x and y relative axes
[ 1260.087] (II) evdev: Mouse USB Laser Mouse: Configuring as mouse
[ 1260.087] (II) evdev: Mouse USB Laser Mouse: Adding scrollwheel support
[ 1260.087] (**) evdev: Mouse USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 1260.087] (**) evdev: Mouse USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1260.088] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.0/input/input4/event2"
[ 1260.088] (II) XINPUT: Adding extended input device "Mouse USB Laser Mouse" (type: MOUSE, id 8)
[ 1260.088] (II) evdev: Mouse USB Laser Mouse: initialized for relative axes.
[ 1260.088] (**) Mouse USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 1260.088] (**) Mouse USB Laser Mouse: (accel) acceleration profile 0
[ 1260.088] (**) Mouse USB Laser Mouse: (accel) acceleration factor: 2.000
[ 1260.088] (**) Mouse USB Laser Mouse: (accel) acceleration threshold: 4
[ 1260.088] (II) config/udev: Adding input device Mouse USB Laser Mouse (/dev/input/mouse0)
[ 1260.088] (II) No input driver specified, ignoring this device.
[ 1260.088] (II) This device may have been added with another device file.
[ 1260.088] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[ 1260.088] (II) No input driver specified, ignoring this device.
[ 1260.088] (II) This device may have been added with another device file.
[ 1260.088] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event7)
[ 1260.088] (II) No input driver specified, ignoring this device.
[ 1260.088] (II) This device may have been added with another device file.
[ 1260.089] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event6)
[ 1260.089] (II) No input driver specified, ignoring this device.
[ 1260.089] (II) This device may have been added with another device file.
[ 1260.089] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
[ 1260.089] (II) No input driver specified, ignoring this device.
[ 1260.089] (II) This device may have been added with another device file.
[ 1260.089] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event9)
[ 1260.089] (II) No input driver specified, ignoring this device.
[ 1260.089] (II) This device may have been added with another device file.
[ 1260.089] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[ 1260.089] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 1260.089] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 1260.089] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 1260.089] (**) Logitech USB Keyboard: always reports core events
[ 1260.089] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"
[ 1260.089] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 1260.089] (--) evdev: Logitech USB Keyboard: Found keys
[ 1260.089] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 1260.089] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.0/input/input2/event0"
[ 1260.089] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 1260.089] (**) Option "xkb_rules" "evdev"
[ 1260.089] (**) Option "xkb_model" "pc104"
[ 1260.089] (**) Option "xkb_layout" "fr"
[ 1260.089] (**) Option "xkb_variant" "latin9"
[ 1260.090] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 1260.090] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 1260.090] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 1260.090] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 1260.090] (**) Logitech USB Keyboard: always reports core events
[ 1260.090] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 1260.090] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 1260.090] (--) evdev: Logitech USB Keyboard: Found 1 mouse buttons
[ 1260.090] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 1260.090] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 1260.090] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 1260.090] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 1260.090] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 1260.090] (--) evdev: Logitech USB Keyboard: Found keys
[ 1260.090] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 1260.090] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 1260.090] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 1260.090] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 1260.090] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1260.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.1/input/input3/event1"
[ 1260.090] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 1260.090] (**) Option "xkb_rules" "evdev"
[ 1260.090] (**) Option "xkb_model" "pc104"
[ 1260.090] (**) Option "xkb_layout" "fr"
[ 1260.090] (**) Option "xkb_variant" "latin9"
[ 1260.090] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 1260.090] (WW) evdev: Logitech USB Keyboard: ignoring absolute axes.
[ 1260.090] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 1260.090] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 1260.090] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 1260.090] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 1260.090] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 1260.090] (II) No input driver specified, ignoring this device.
[ 1260.090] (II) This device may have been added with another device file.
[ 1264.075] (II) RADEON(0): EDID vendor "ACR", prod id 44406
[ 1264.075] (II) RADEON(0): Using EDID range info for horizontal sync
[ 1264.075] (II) RADEON(0): Using EDID range info for vertical refresh
[ 1264.075] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1264.075] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 1264.075] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1264.075] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 1264.114] (II) RADEON(0): EDID vendor "ACR", prod id 44406
[ 1264.114] (II) RADEON(0): Using hsync ranges from config file
[ 1264.114] (II) RADEON(0): Using vrefresh ranges from config file
[ 1264.114] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1264.114] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 1264.114] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1264.114] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 1274.596] (II) RADEON(0): EDID vendor "ACR", prod id 44406
[ 1274.596] (II) RADEON(0): Using hsync ranges from config file
[ 1274.596] (II) RADEON(0): Using vrefresh ranges from config file
[ 1274.596] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1274.596] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 1274.596] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1274.596] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1274.597] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 2893.333] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 12226.865] (II) evdev: Logitech USB Keyboard: Close
[ 12226.865] (II) UnloadModule: "evdev"
[ 12226.865] (II) evdev: Logitech USB Keyboard: Close
[ 12226.865] (II) UnloadModule: "evdev"
[ 12226.865] (II) evdev: Mouse USB Laser Mouse: Close
[ 12226.865] (II) UnloadModule: "evdev"
[ 12226.865] (II) evdev: Power Button: Close
[ 12226.865] (II) UnloadModule: "evdev"
[ 12226.865] (II) evdev: Power Button: Close
[ 12226.865] (II) UnloadModule: "evdev"
[ 12226.867] (EE) Server terminated successfully (0). Closing log file.
Je ne savais pas trop quoi donner, les logs sont très longs...oO