Bonsoir,
j'ai suivi la procédure pour installer
Kodi depuis le wiki anglais d'archlinux. Installé également
LightDM pour le login automatique.
Mais un
$ startx
me renvoie une erreur.
Et voici le fichier /var/log/Xorg.0.log :
Code : Tout sélectionner
[ 99.673]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 99.674] X Protocol Version 11, Revision 0
[ 99.674] Build Operating System: Linux 3.10.69-1-ARCH armv7l
[ 99.675] Current Operating System: Linux octo 3.18.10-2-ARCH #1 SMP PREEMPT Fri Mar 27 19:59:03 MDT 2015 armv7l
[ 99.675] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2709.boardrev=0xa01041 bcm2709.serial=0xa8a47a03 smsc95xx.macaddr=B8:27:EB:A4:7A:03 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 root=/dev/mmcblk0p2 rw rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 elevator=noop
[ 99.677] Build Date: 14 March 2015 01:56:28PM
[ 99.677]
[ 99.677] Current version of pixman: 0.32.6
[ 99.677] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 99.678] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 99.679] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 9 17:07:41 2015
[ 99.680] (==) Using config file: "/etc/X11/xorg.conf"
[ 99.681] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 99.681] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 99.683] (==) ServerLayout "Layout0"
[ 99.683] (**) |-->Screen "Screen0" (0)
[ 99.683] (**) | |-->Monitor "Monitor0"
[ 99.684] (**) |-->Input Device "Keyboard0"
[ 99.684] (**) |-->Input Device "Mouse0"
[ 99.685] (==) Automatically adding devices
[ 99.685] (==) Automatically enabling devices
[ 99.685] (==) Automatically adding GPU devices
[ 99.685] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 99.685] Entry deleted from font path.
[ 99.685] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 99.685] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 99.685] Entry deleted from font path.
[ 99.685] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 99.685] Entry deleted from font path.
[ 99.686] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 99.686] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 99.686] Entry deleted from font path.
[ 99.686] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 99.686] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 99.686] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 99.686] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 99.686] (WW) Disabling Keyboard0
[ 99.686] (WW) Disabling Mouse0
[ 99.686] (II) Loader magic: 0x1dfed8
[ 99.686] (II) Module ABI versions:
[ 99.686] X.Org ANSI C Emulation: 0.4
[ 99.686] X.Org Video Driver: 19.0
[ 99.687] X.Org XInput driver : 21.0
[ 99.687] X.Org Server Extension : 9.0
[ 99.697] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[ 99.698] (II) no primary bus or device found
[ 99.698] (II) LoadModule: "glx"
[ 99.700] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 99.722] (II) Module glx: vendor="X.Org Foundation"
[ 99.722] compiled for 1.17.1, module version = 1.0.0
[ 99.722] ABI class: X.Org Server Extension, version 9.0
[ 99.722] (==) AIGLX enabled
[ 99.723] (==) Matched modesetting as autoconfigured driver 0
[ 99.723] (==) Matched fbdev as autoconfigured driver 1
[ 99.723] (==) Assigned the driver to the xf86ConfigLayout
[ 99.723] (II) LoadModule: "modesetting"
[ 99.724] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 99.725] (II) Module modesetting: vendor="X.Org Foundation"
[ 99.725] compiled for 1.17.1, module version = 1.17.1
[ 99.725] Module class: X.Org Video Driver
[ 99.725] ABI class: X.Org Video Driver, version 19.0
[ 99.725] (II) LoadModule: "fbdev"
[ 99.726] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 99.727] (II) Module fbdev: vendor="X.Org Foundation"
[ 99.727] compiled for 1.17.1, module version = 0.4.4
[ 99.727] Module class: X.Org Video Driver
[ 99.727] ABI class: X.Org Video Driver, version 19.0
[ 99.727] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 99.727] (II) FBDEV: driver for framebuffer: fbdev
[ 99.727] (++) using VT number 2
[ 99.727] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 99.728] (WW) Falling back to old probe method for modesetting
[ 99.728] (EE) open /dev/dri/card0: No such file or directory
[ 99.728] (WW) Falling back to old probe method for fbdev
[ 99.728] (II) Loading sub module "fbdevhw"
[ 99.728] (II) LoadModule: "fbdevhw"
[ 99.729] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 99.730] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 99.730] compiled for 1.17.1, module version = 0.0.2
[ 99.730] ABI class: X.Org Video Driver, version 19.0
[ 99.731] (II) FBDEV(0): using default device
[ 99.731] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 99.731] (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32
[ 99.731] (==) FBDEV(0): RGB weight 888
[ 99.731] (==) FBDEV(0): Default visual is TrueColor
[ 99.731] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 99.732] (II) FBDEV(0): hardware: BCM2708 FB (video memory: 2531kB)
[ 99.732] (II) FBDEV(0): checking modes against framebuffer device...
[ 99.732] (II) FBDEV(0): checking modes against monitor...
[ 99.732] (--) FBDEV(0): Virtual size is 1440x900 (pitch 1440)
[ 99.732] (**) FBDEV(0): Built-in mode "current"
[ 99.732] (==) FBDEV(0): DPI set to (96, 96)
[ 99.732] (II) Loading sub module "fb"
[ 99.732] (II) LoadModule: "fb"
[ 99.733] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 99.735] (II) Module fb: vendor="X.Org Foundation"
[ 99.735] compiled for 1.17.1, module version = 1.0.0
[ 99.735] ABI class: X.Org ANSI C Emulation, version 0.4
[ 99.735] (**) FBDEV(0): using shadow framebuffer
[ 99.735] (II) Loading sub module "shadow"
[ 99.735] (II) LoadModule: "shadow"
[ 99.736] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 99.737] (II) Module shadow: vendor="X.Org Foundation"
[ 99.737] compiled for 1.17.1, module version = 1.1.0
[ 99.737] ABI class: X.Org ANSI C Emulation, version 0.4
[ 99.737] (II) UnloadModule: "modesetting"
[ 99.737] (II) Unloading modesetting
[ 99.738] (==) Depth 24 pixmap format is 32 bpp
[ 99.755] (==) FBDEV(0): Backing store enabled
[ 99.757] (==) FBDEV(0): DPMS enabled
[ 99.757] (==) RandR enabled
[ 99.826] (II) AIGLX: Screen 0 is not DRI2 capable
[ 99.827] (EE) AIGLX: reverting to software rendering
[ 99.987] (II) AIGLX: Loaded and initialized swrast
[ 99.987] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 100.244] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[ 100.244] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 100.244] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 100.244] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Terminate"
[ 100.244] (II) LoadModule: "evdev"
[ 100.245] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 100.247] (II) Module evdev: vendor="X.Org Foundation"
[ 100.247] compiled for 1.17.1, module version = 2.9.2
[ 100.247] Module class: X.Org XInput Driver
[ 100.247] ABI class: X.Org XInput driver, version 21.0
[ 100.250] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 10 paused 0
[ 100.250] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 100.250] (**) Logitech USB Keyboard: always reports core events
[ 100.250] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"
[ 100.251] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 100.251] (--) evdev: Logitech USB Keyboard: Found keys
[ 100.251] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 100.251] (**) Option "config_info" "udev:/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C31C.0001/input/input0/event0"
[ 100.251] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 6)
[ 100.251] (**) Option "xkb_rules" "evdev"
[ 100.251] (**) Option "xkb_model" "pc104"
[ 100.251] (**) Option "xkb_layout" "fr"
[ 100.252] (**) Option "xkb_variant" "latin9"
[ 100.252] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.382] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 100.382] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 100.382] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Layout"
[ 100.382] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Terminate"
[ 100.385] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 11 paused 0
[ 100.385] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 100.385] (**) Logitech USB Keyboard: always reports core events
[ 100.385] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 100.386] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 100.386] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 100.386] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 100.386] (--) evdev: Logitech USB Keyboard: Found keys
[ 100.386] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 100.386] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 100.386] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 100.386] (**) Option "config_info" "udev:/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C31C.0002/input/input1/event1"
[ 100.386] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 7)
[ 100.386] (**) Option "xkb_rules" "evdev"
[ 100.387] (**) Option "xkb_model" "pc104"
[ 100.387] (**) Option "xkb_layout" "fr"
[ 100.387] (**) Option "xkb_variant" "latin9"
[ 100.387] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.388] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 100.389] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 100.389] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 100.389] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 100.389] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 100.411] (EE)
[ 100.412] (EE) Backtrace:
[ 100.412] (EE)
[ 100.412] (EE) Segmentation fault at address 0x76301000
[ 100.412] (EE)
Fatal server error:
[ 100.413] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 100.413] (EE)
[ 100.413] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 100.413] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 100.413] (EE)
[ 100.433] (EE) Server terminated with error (1). Closing log file.
Vous auriez une petite idée du problème ?
Merci pour les réponses.
Bonne soirée.