J'ai un vieux Dell latitude D410 que j'ai récupéré, et je suis en train d'installer archlinux dessus. Le souci que j'ai c'est pour configurer xorg.
Je n'arrive pas à créer un fichier xorg.conf.
Voici ce que me donne la commande Xorg
Code : Tout sélectionner
$ sudo Xorg :2 -configure
[sudo] Mot de passe de daniel :
X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.5.4-1-ARCH i686
Current Operating System: Linux portablosaure 4.8.4-1-ARCH #1 SMP PREEMPT Sat Oct 22 18:45:32 CEST 2016 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d4090f95-bcaa-4bb7-8b35-66eb34b8e413 rw quiet
Build Date: 19 July 2016 05:56:07PM
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.2.log", Time: Tue Nov 1 11:32:37 2016
List of video drivers:
modesetting
intel
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed.
(EE) Server terminated with error (2). Closing log file.
Code : Tout sélectionner
$ cat /etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
EndSection
Code : Tout sélectionner
mkinitcpio -p linux
Voici le fichier .conf:
Code : Tout sélectionner
$ cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="intel_agp i915"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Code : Tout sélectionner
$ lsmod
Module Size Used by
arc4 16384 2
b43 385024 0
bcma 45056 1 b43
mac80211 598016 1 b43
joydev 20480 0
cfg80211 442368 2 b43,mac80211
mousedev 20480 0
snd_intel8x0 32768 0
snd_intel8x0m 20480 0
iTCO_wdt 16384 0
gpio_ich 16384 0
snd_ac97_codec 98304 2 snd_intel8x0m,snd_intel8x0
ac97_bus 16384 1 snd_ac97_codec
iTCO_vendor_support 16384 1 iTCO_wdt
ppdev 20480 0
snd_pcm 81920 3 snd_intel8x0m,snd_ac97_codec,snd_intel8x0
dell_laptop 20480 0
dell_smbios 16384 1 dell_laptop
rfkill 20480 3 dell_laptop,cfg80211
snd_timer 28672 1 snd_pcm
snd 57344 5 snd_intel8x0m,snd_ac97_codec,snd_timer,snd_intel8x0,snd_pcm
dcdbas 16384 1 dell_smbios
dell_smm_hwmon 16384 0
psmouse 126976 0
pcspkr 16384 0
soundcore 16384 1 snd
tg3 155648 0
ptp 20480 1 tg3
pps_core 20480 1 ptp
libphy 40960 1 tg3
input_leds 16384 0
led_class 16384 3 b43,input_leds,dell_laptop
ssb 57344 1 b43
yenta_socket 40960 0
pcmcia_rsrc 20480 1 yenta_socket
mmc_core 118784 2 b43,ssb
i2c_i801 24576 0
i2c_smbus 16384 1 i2c_i801
pcmcia 49152 1 ssb
irda 151552 0
lpc_ich 20480 0
pcmcia_core 20480 3 yenta_socket,pcmcia,pcmcia_rsrc
rng_core 16384 1 b43
parport_pc 28672 0
parport 40960 2 parport_pc,ppdev
shpchp 32768 0
battery 16384 0
thermal 20480 0
evdev 20480 10
mac_hid 16384 0
ac 16384 0
acpi_cpufreq 20480 0
tpm_tis 16384 0
tpm_tis_core 20480 1 tpm_tis
tpm 36864 2 tpm_tis,tpm_tis_core
sch_fq_codel 20480 6
ip_tables 20480 0
x_tables 20480 1 ip_tables
ext4 495616 2
crc16 16384 1 ext4
jbd2 81920 1 ext4
fscrypto 24576 1 ext4
mbcache 16384 3 ext4
sd_mod 36864 4
ata_generic 16384 0
pata_acpi 16384 0
serio_raw 16384 0
atkbd 24576 0
libps2 16384 2 atkbd,psmouse
ata_piix 32768 3
uhci_hcd 40960 0
libata 188416 3 ata_piix,ata_generic,pata_acpi
scsi_mod 139264 2 sd_mod,libata
ehci_pci 16384 0
ehci_hcd 65536 1 ehci_pci
usbcore 184320 3 ehci_hcd,uhci_hcd,ehci_pci
usb_common 16384 1 usbcore
i8042 20480 1 dell_laptop
serio 20480 6 serio_raw,atkbd,psmouse,i8042
i915 1183744 2
video 32768 2 dell_laptop,i915
button 16384 1 i915
i2c_algo_bit 16384 1 i915
drm_kms_helper 114688 1 i915
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 249856 4 i915,drm_kms_helper
intel_agp 20480 0
intel_gtt 20480 2 intel_agp,i915
agpgart 32768 3 intel_agp,intel_gtt,drm
Code : Tout sélectionner
$ cat /var/log/Xorg.0.log
[ 19.713]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 19.713] X Protocol Version 11, Revision 0
[ 19.713] Build Operating System: Linux 4.5.4-1-ARCH i686
[ 19.713] Current Operating System: Linux portablosaure 4.8.4-1-ARCH #1 SMP PREEMPT Sat Oct 22 18:45:32 CEST 2016 i686
[ 19.714] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d4090f95-bcaa-4bb7-8b35-66eb34b8e413 rw quiet
[ 19.714] Build Date: 19 July 2016 05:56:07PM
[ 19.714]
[ 19.714] Current version of pixman: 0.34.0
[ 19.714] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.714] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.714] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 1 09:55:50 2016
[ 19.748] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.748] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.774] (==) No Layout section. Using the first Screen section.
[ 19.774] (==) No screen section available. Using defaults.
[ 19.774] (**) |-->Screen "Default Screen Section" (0)
[ 19.774] (**) | |-->Monitor "<default monitor>"
[ 19.792] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 19.792] (**) | |-->Device "Intel Graphics"
[ 19.792] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.792] (==) Automatically adding devices
[ 19.792] (==) Automatically enabling devices
[ 19.792] (==) Automatically adding GPU devices
[ 19.799] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 19.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 19.859] Entry deleted from font path.
[ 19.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.859] Entry deleted from font path.
[ 19.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.860] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.860] Entry deleted from font path.
[ 19.860] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.860] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 19.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.860] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.860] (II) Loader magic: 0x82a96c0
[ 19.860] (II) Module ABI versions:
[ 19.860] X.Org ANSI C Emulation: 0.4
[ 19.860] X.Org Video Driver: 20.0
[ 19.860] X.Org XInput driver : 22.1
[ 19.860] X.Org Server Extension : 9.0
[ 19.863] (--) using VT number 2
[ 19.863] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 19.864] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.897] (--) PCI:*(0:0:2:0) 8086:2592:1028:018f rev 3, Mem @ 0xdff00000/524288, 0xc0000000/268435456, 0xdfec0000/262144, I/O @ 0x0000ec38/8, BIOS @ 0x????????/131072
[ 19.897] (--) PCI: (0:0:2:1) 8086:2792:1028:018f rev 3, Mem @ 0xdff80000/524288
[ 19.897] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 19.897] (II) LoadModule: "glx"
[ 19.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.042] (II) Module glx: vendor="X.Org Foundation"
[ 20.042] compiled for 1.18.4, module version = 1.0.0
[ 20.042] ABI class: X.Org Server Extension, version 9.0
[ 20.042] (==) AIGLX enabled
[ 20.042] (II) LoadModule: "intel"
[ 20.042] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.134] (II) Module intel: vendor="X.Org Foundation"
[ 20.134] compiled for 1.18.4, module version = 2.99.917
[ 20.134] Module class: X.Org Video Driver
[ 20.134] ABI class: X.Org Video Driver, version 20.0
[ 20.134] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 20.134] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 20.134] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 20.134] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 20.135] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 20.135] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 20.162] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[ 20.162] (II) intel(0): SNA compiled from 2.99.917-722-g714052f
[ 20.182] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 20.182] (--) intel(0): CPU: x86, sse2; using a maximum of 1 threads
[ 20.182] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.182] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.182] (==) intel(0): RGB weight 888
[ 20.182] (==) intel(0): Default visual is TrueColor
[ 20.183] (II) intel(0): Output LVDS1 has no monitor section
[ 20.184] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 20.184] (II) intel(0): Enabled output LVDS1
[ 20.184] (II) intel(0): Output VGA1 has no monitor section
[ 20.184] (II) intel(0): Enabled output VGA1
[ 20.184] (II) intel(0): Output DVI1 has no monitor section
[ 20.184] (II) intel(0): Enabled output DVI1
[ 20.184] (II) intel(0): Output TV1 has no monitor section
[ 20.185] (II) intel(0): Enabled output TV1
[ 20.185] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 20.185] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 20.185] (II) intel(0): Enabled output VIRTUAL1
[ 20.185] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 1
[ 20.185] (==) intel(0): TearFree disabled
[ 20.185] (==) intel(0): DPI set to (96, 96)
[ 20.185] (II) Loading sub module "dri2"
[ 20.185] (II) LoadModule: "dri2"
[ 20.185] (II) Module "dri2" already built-in
[ 20.185] (II) Loading sub module "present"
[ 20.185] (II) LoadModule: "present"
[ 20.185] (II) Module "present" already built-in
[ 20.186] (==) Depth 24 pixmap format is 32 bpp
[ 20.222] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 20.223] (==) intel(0): Backing store enabled
[ 20.223] (==) intel(0): Silken mouse enabled
[ 20.224] (II) intel(0): HW Cursor enabled
[ 20.224] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.225] (==) intel(0): DPMS enabled
[ 20.226] (==) intel(0): Display hotplug detection enabled
[ 20.248] (II) intel(0): [DRI2] Setup complete
[ 20.248] (II) intel(0): [DRI2] DRI driver: i915
[ 20.248] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 20.248] (II) intel(0): direct rendering: DRI2 enabled
[ 20.248] (II) intel(0): hardware support for Present enabled
[ 20.248] (--) RandR disabled
[ 20.561] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 20.561] (II) AIGLX: enabled GLX_ARB_create_context
[ 20.561] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 20.561] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 20.561] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 20.561] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 20.561] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 20.561] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 20.561] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 20.561] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 20.561] (II) AIGLX: Loaded and initialized i915
[ 20.561] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.583] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 20.584] (II) intel(0): Setting screen physical size to 270 x 203
[ 20.941] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 20.941] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 20.941] (II) LoadModule: "libinput"
[ 20.942] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 21.003] (II) Module libinput: vendor="X.Org Foundation"
[ 21.003] compiled for 1.18.4, module version = 0.22.0
[ 21.003] Module class: X.Org XInput Driver
[ 21.003] ABI class: X.Org XInput driver, version 22.1
[ 21.003] (II) Using input driver 'libinput' for 'Video Bus'
[ 21.003] (**) Video Bus: always reports core events
[ 21.003] (**) Option "Device" "/dev/input/event3"
[ 21.003] (**) Option "_source" "server/udev"
[ 21.005] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[ 21.005] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[ 21.013] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3/event3"
[ 21.013] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 21.014] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[ 21.014] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[ 21.015] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 21.015] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.015] (II) Using input driver 'libinput' for 'Power Button'
[ 21.015] (**) Power Button: always reports core events
[ 21.015] (**) Option "Device" "/dev/input/event1"
[ 21.015] (**) Option "_source" "server/udev"
[ 21.016] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 21.016] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 21.026] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 21.026] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.028] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 21.028] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 21.029] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 21.029] (II) No input driver specified, ignoring this device.
[ 21.029] (II) This device may have been added with another device file.
[ 21.030] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 21.030] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 21.030] (II) Using input driver 'libinput' for 'Sleep Button'
[ 21.030] (**) Sleep Button: always reports core events
[ 21.030] (**) Option "Device" "/dev/input/event2"
[ 21.030] (**) Option "_source" "server/udev"
[ 21.031] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 21.031] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 21.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 21.040] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 21.041] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 21.041] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 21.042] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 21.042] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.042] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 21.042] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.042] (**) Option "Device" "/dev/input/event4"
[ 21.042] (**) Option "_source" "server/udev"
[ 21.043] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[ 21.043] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is a keyboard
[ 21.063] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 21.063] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 21.065] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[ 21.065] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is a keyboard
[ 21.066] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event7)
[ 21.066] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[ 21.066] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 21.066] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 21.066] (**) Option "Device" "/dev/input/event7"
[ 21.066] (**) Option "_source" "server/udev"
[ 21.067] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event7 is tagged by udev as: Touchpad
[ 21.067] (II) AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 21.067] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event7 is a touchpad
[ 21.086] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 21.087] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 10)
[ 21.087] (**) Option "AccelerationScheme" "none"
[ 21.087] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) selected scheme none/0
[ 21.087] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 21.087] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 21.088] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event7 is tagged by udev as: Touchpad
[ 21.088] (II) AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 21.088] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event7 is a touchpad
[ 21.089] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[ 21.089] (II) No input driver specified, ignoring this device.
[ 21.089] (II) This device may have been added with another device file.
[ 21.091] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event6)
[ 21.091] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[ 21.091] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 21.091] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 21.091] (**) Option "Device" "/dev/input/event6"
[ 21.091] (**) Option "_source" "server/udev"
[ 21.092] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event6 is tagged by udev as: Mouse Pointingstick
[ 21.092] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event6 is a pointer caps
[ 21.110] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event6"
[ 21.110] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 11)
[ 21.110] (**) Option "AccelerationScheme" "none"
[ 21.110] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[ 21.110] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 21.110] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 21.111] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event6 is tagged by udev as: Mouse Pointingstick
[ 21.111] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event6 is a pointer caps
[ 21.112] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse0)
[ 21.112] (II) No input driver specified, ignoring this device.
[ 21.112] (II) This device may have been added with another device file.
[ 21.113] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 21.114] (II) No input driver specified, ignoring this device.
[ 21.114] (II) This device may have been added with another device file.
[ 22.186] (II) intel(0): EDID vendor "SEC", prod id 19032
[ 22.186] (II) intel(0): Printing DDC gathered Modelines:
[ 22.186] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
Code : Tout sélectionner
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
02:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
02:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller
02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)