[yay] L'utilisateur n'est pas autorisé [résolu]

Autres projets et contributions
Avatar de l’utilisateur
Fif91
yeomen
Messages : 225
Inscription : lun. 17 janv. 2011, 13:23

[yay] L'utilisateur n'est pas autorisé [résolu]

Message par Fif91 »

Bonjour,
Suite à ce post, j'ai décidé de découvrir l'assistant yaourt, nommé yay.
Lorsque je le lance pour installer un paquet, j'ai ce message :

Code : Tout sélectionner

Mot de passe de arphilippe : 
Désolé, l'utilisateur arphilippe n'est pas autorisé à exécuter « /bin/pacman --ask 4 -U --noconfirm -- /home/arphilippe/.cache/yay/gsdjvu/gsdjvu-1.9-2-x86_64.pkg.tar.xz » en tant que root sur PC_Master.
J'ai configuré sudoers, mais ne pense pas que ce soit fait correctement.

Code : Tout sélectionner

## sudoers file.
##
## This file MUST be edited with the 'visudo' command as root.
## Failure to use 'visudo' may result in syntax or file permission errors
## that prevent sudo from running.
##
## See the sudoers man page for the details on how to write a sudoers file.
##

##
## Host alias specification
##
## Groups of machines. These may include host names (optionally with wildcards),
## IP addresses, network numbers or netgroups.
# Host_Alias    WEBSERVERS = www1, www2, www3

##
## User alias specification
##
## Groups of users.  These may consist of user names, uids, Unix groups,
## or netgroups.
# User_Alias    ADMINS = millert, dowdy, mikef

##
## Cmnd alias specification
##
## Groups of commands.  Often used to group related commands together.
# Cmnd_Alias    PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
#                           /usr/bin/pkill, /usr/bin/top
Cmnd_Alias    POWER_CMD = /sbin/shutdown -h now,/sbin/reboot,/sbin/halt -p,/sbin/poweroff,/sbin/reboot

##
## Defaults specification
##
## You may wish to keep some of the following environment variables
## when running commands via sudo.
##
## Locale settings
# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
##
## Run X applications through sudo; HOME is used to find the
## .Xauthority file.  Note that other programs use HOME to find   
## configuration files and this may lead to privilege escalation!
# Defaults env_keep += "HOME"
##
## X11 resource path settings
# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
##
## Desktop path settings
# Defaults env_keep += "QTDIR KDEDIR"
##
## Allow sudo-run commands to inherit the callers' ConsoleKit session
# Defaults env_keep += "XDG_SESSION_COOKIE"
##
## Uncomment to enable special input methods.  Care should be taken as
## this may allow users to subvert the command being run via sudo.
# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
##
## Uncomment to enable logging of a command's output, except for
## sudoreplay and reboot.  Use sudoreplay to play back logged sessions.
# Defaults log_output
# Defaults!/usr/bin/sudoreplay !log_output
# Defaults!/usr/local/bin/sudoreplay !log_output
# Defaults!/sbin/reboot !log_output

##
## Runas alias specification
##

##
## User privilege specification
##
root ALL=(ALL) ALL
 %truecrypt ALL=(root) NOPASSWD:/usr/bin/truecrypt
 arphilippe ALL=(root) NOPASSWD:/usr/bin/pacman -S -y --

## Uncomment to allow members of group wheel to execute any command
# %wheel ALL=(ALL) ALL
%power ALL=(ALL) NOPASSWD: POWER_CMD


## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL

## Uncomment to allow members of group sudo to execute any command
# %sudo ALL=(ALL) ALL


## Uncomment to allow any user to run sudo if they know the password
## of the user they are running the command as (root by default).
# Defaults targetpw  # Ask for the password of the target user
# ALL ALL=(ALL) ALL  # WARNING: only use this together with 'Defaults targetpw'

## Read drop-in files from /etc/sudoers.d
## (the '#' here does not indicate a comment)
#includedir /etc/sudoers.d

Pouvez-vous m'aider, svp ?
Dernière modification par Fif91 le sam. 09 juin 2018, 23:02, modifié 1 fois.
Mageia 4 x64 | ArchLinux x64 | KDE
MSI P45 Neo-F - Intel E8500 @3.16 GHz - 7 Go RAM - ATI HD Radeon 3850
Avatar de l’utilisateur
waitnsea
Maître du Kyudo
Messages : 2114
Inscription : jeu. 15 mars 2012, 05:08

Re: [yay] L'utilisateur n'est pas autorisé

Message par waitnsea »

Fif91 a écrit : sam. 09 juin 2018, 15:00
Lorsque je le lance pour installer un paquet, j'ai ce message :

Code : Tout sélectionner

Mot de passe de arphilippe : 
Désolé, l'utilisateur arphilippe n'est pas autorisé à exécuter « /bin/pacman --ask 4 -U --noconfirm -- /home/arphilippe/.cache/yay/gsdjvu/gsdjvu-1.9-2-x86_64.pkg.tar.xz » en tant que root sur PC_Master.
J'ai configuré sudoers, mais ne pense pas que ce soit fait correctement.

Code : Tout sélectionner

## sudoers file.
...
##
## User privilege specification
##
root ALL=(ALL) ALL
 %truecrypt ALL=(root) NOPASSWD:/usr/bin/truecrypt
 arphilippe ALL=(root) NOPASSWD:/usr/bin/pacman -S -y --

## Uncomment to allow members of group wheel to execute any command
# %wheel ALL=(ALL) ALL
%power ALL=(ALL) NOPASSWD: POWER_CMD


## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL

## Uncomment to allow members of group sudo to execute any command
# %sudo ALL=(ALL) ALL


## Uncomment to allow any user to run sudo if they know the password
## of the user they are running the command as (root by default).
# Defaults targetpw  # Ask for the password of the target user
# ALL ALL=(ALL) ALL  # WARNING: only use this together with 'Defaults targetpw'

## Read drop-in files from /etc/sudoers.d
## (the '#' here does not indicate a comment)
#includedir /etc/sudoers.d

Pouvez-vous m'aider, svp ?
Bonjour,
Tu dois éditer le fichier uniquemenr par la commande # visudo, et obtenir au final :

Code : Tout sélectionner

##
## User privilege specification
##
root ALL=(ALL) ALL

## Uncomment to allow members of group wheel to execute any command
%wheel ALL=(ALL) ALL

## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL

## Uncomment to allow members of group sudo to execute any command
# %sudo	ALL=(ALL) ALL
Tu vois, tu as décommenté à de mauvais endroits :wink:
quant à %power ALL=(ALL) NOPASSWD: POWER_CMD je ne sais d'où il a pu venir !!!
Edit tu ne dois donner les droits qu'au groupe WHEEL, pas à toi, mais tu dois te mettre dans ce groupe avec usermod -a -G
Avatar de l’utilisateur
Fif91
yeomen
Messages : 225
Inscription : lun. 17 janv. 2011, 13:23

Re: [yay] L'utilisateur n'est pas autorisé

Message par Fif91 »

Super. Merci waitnsea
Mageia 4 x64 | ArchLinux x64 | KDE
MSI P45 Neo-F - Intel E8500 @3.16 GHz - 7 Go RAM - ATI HD Radeon 3850
Répondre