[mate] Plus de gestion graphique après mise à jour(en cours)
[mate] Plus de gestion graphique après mise à jour(en cours)
Bonjour
Me voici revenu
après mise à jour (il y 2 ou 3 jours)mon Arch mate est devenue ingérable en mode graphique
L'écran se devine mais complètement "freezé".Il apparaît quelques dixième de seconde en passant de tty1 à tty2 et inversement
J'ai désinstallé et réinstallé mate rien .....LXDE a été ajouté , fonctionne sauf mon clavier qui à chaque démarrage est en qwerty !!!!
Si quelqu'un a une idée merci
Me voici revenu
après mise à jour (il y 2 ou 3 jours)mon Arch mate est devenue ingérable en mode graphique
L'écran se devine mais complètement "freezé".Il apparaît quelques dixième de seconde en passant de tty1 à tty2 et inversement
J'ai désinstallé et réinstallé mate rien .....LXDE a été ajouté , fonctionne sauf mon clavier qui à chaque démarrage est en qwerty !!!!
Si quelqu'un a une idée merci
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Ça n’interesse absolument personne mon problème? J’y passe du temps mais pas encore trouvé de solution ça doit être une histoire de droit ,accès dbus.pas réussi non plus à créer un autre utilisateur ça ne veut pas fonctionner..........
- floflo77890
- Maître du Kyudo
- Messages : 1266
- Inscription : lun. 29 juil. 2013, 21:05
- Localisation : île de france
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Je ne sais pas si cela peut aider mais au moins ont auras une première avance. Peux tu nous poster le log ?
Pour le clavier en qwerty il faut configurer avec xorg tu as une page sur le wiki qui te dis comment faire.
Pour le clavier en qwerty il faut configurer avec xorg tu as une page sur le wiki qui te dis comment faire.
- FoolEcho
- Maître du Kyudo
- Messages : 10707
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Et regarder quelles ont été les dernières mises à jour à cette date (/var/log/pacman.log).
«The following statement is not true. The previous statement is true.»
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Merci de vous intéresser à mon "histoire"
Pas très réactif (moi) fêtes obligent
Je pense qu'il s'agit de la mise à jour du 21/12
Puis désactivation des clès
Importations des certificats
et pour terminer
Voilà pour le log
Un autre truc bizarre j'ai essayé plein de gestionnaires de session seul LXDM fonctionne (GDM, SLIM, SDDM) j'ai aussi essayé d'autres environnements (cinnamon gnome) seul Lxdm fonctionne.
J'aimerai pouvoir retourner sous Mate que je préfère
Merci
Pas très réactif (moi) fêtes obligent
Je pense qu'il s'agit de la mise à jour du 21/12
Code : Tout sélectionner
2018-12-21 13:16] [PACMAN] synchronizing package lists
[2018-12-21 13:16] [PACMAN] starting full system upgrade
[2018-12-21 13:27] [ALPM] running '70-dkms-remove.hook'...
[2018-12-21 13:27] [ALPM] transaction started
[2018-12-21 13:27] [ALPM] upgraded libsystemd (239.303-1 -> 239.370-1)
[2018-12-21 13:27] [ALPM] upgraded e2fsprogs (1.44.4-1 -> 1.44.5-1)
[2018-12-21 13:27] [ALPM] upgraded dbus (1.12.10-2 -> 1.12.12-1)
[2018-12-21 13:27] [ALPM] upgraded aircrack-ng (1.4-1 -> 1.5.2-1)
[2018-12-21 13:27] [ALPM] upgraded archlinux-keyring (20181128-1 -> 20181218-1)de][quote]2018-12-21 13:16] [PACMAN] synchronizing package lists
[2018-12-21 13:16] [PACMAN] starting full system upgrade
[2018-12-21 13:27] [ALPM] running '70-dkms-remove.hook'...
[2018-12-21 13:27] [ALPM] transaction started
[2018-12-21 13:27] [ALPM] upgraded libsystemd (239.303-1 -> 239.370-1)
[2018-12-21 13:27] [ALPM] upgraded e2fsprogs (1.44.4-1 -> 1.44.5-1)
[2018-12-21 13:27] [ALPM] upgraded dbus (1.12.10-2 -> 1.12.12-1)
[2018-12-21 13:27] [ALPM] upgraded aircrack-ng (1.4-1 -> 1.5.2-1)
[2018-12-21 13:27] [ALPM] upgraded archlinux-keyring (20181128-1 -> 20181218-1)
Code : Tout sélectionner
[2018-12-21 13:27] [ALPM-SCRIPTLET] ==> Mise à jour de la base de données de confiance…
[2018-12-21 13:27] [ALPM-SCRIPTLET] gpg: la prochaine vérification de la base de confiance aura lieu le 2019-03-29
[2018-12-21 13:27] [ALPM] upgraded glib2 (2.58.1+67+g17519e039-1 -> 2.58.2-1)
[2018-12-21 13:27] [ALPM] upgraded libnghttp2 (1.34.0-1 -> 1.35.1-1)
[2018-12-21 13:27] [ALPM] upgraded poppler (0.71.0-1 -> 0.72.0-1)
[2018-12-21 13:27] [ALPM] upgraded poppler-glib (0.71.0-1 -> 0.72.0-1)
[2018-12-21 13:27] [ALPM] upgraded systemd (239.303-1 -> 239.370-1)
[2018-12-21 13:27] [ALPM] upgraded polkit (0.115+3+g8638ec5-1 -> 0.115+24+g5230646-1)
[2018-12-21 13:27] [ALPM] upgraded llvm-libs (7.0.0-2 -> 7.0.1-1)
[2018-12-21 13:27] [ALPM] upgraded atril (1.20.3-1 -> 1.20.3-2)
[2018-12-21 13:27] [ALPM] upgraded libmagick (7.0.8.16-1 -> 7.0.8.19-1)
[2018-12-21 13:27] [ALPM] upgraded cups-filters (1.21.5-1 -> 1.21.6-1)
[2018-12-21 13:27] [ALPM] upgraded mate-desktop (1.20.3-1 -> 1.20.4-1)
[2018-12-21 13:27] [ALPM] upgraded eom (1.20.1-1 -> 1.20.2-1)
[2018-12-21 13:27] [ALPM] upgraded glib2-docs (2.58.1+67+g17519e039-1 -> 2.58.2-1)
[2018-12-21 13:27] [ALPM] upgraded libassuan (2.5.1-1 -> 2.5.2-1)
[2018-12-21 13:27] [ALPM] upgraded gnupg (2.2.11-1 -> 2.2.12-1)
[2018-12-21 13:27] [ALPM] upgraded libinput (1.12.3-1 -> 1.12.4-1)
[2018-12-21 13:27] [ALPM] upgraded libmateweather (1.20.1-1 -> 1.20.2-1)
[2018-12-21 13:28] [ALPM] upgraded libreoffice-fresh (6.1.3-2 -> 6.1.4-1)
[2018-12-21 13:28] [ALPM] upgraded libreoffice-fresh-fr (6.1.3-1 -> 6.1.4-1)
[2018-12-21 13:28] [ALPM] upgraded libwbclient (4.9.3-1 -> 4.9.4-1)
[2018-12-21 13:28] [ALPM] upgraded libxnvctrl (415.23-1 -> 415.25-1)
[2018-12-21 13:28] [ALPM] upgraded linux-firmware (20181026.1cb4e51-1 -> 20181218.0f22c85-1)
[2018-12-21 13:28] [ALPM] upgraded linux (4.19.8.arch1-1 -> 4.19.11.arch1-1)
[2018-12-21 13:28] [ALPM] installed libxpresent (1.0.0-1)
[2018-12-21 13:28] [ALPM] upgraded marco (1.20.2-1 -> 1.20.3-1)
[2018-12-21 13:28] [ALPM] upgraded mate-calc (1.20.2-1 -> 1.20.3-1)
[2018-12-21 13:28] [ALPM] upgraded mate-control-center (1.20.3-1 -> 1.20.4-1)
[2018-12-21 13:28] [ALPM] upgraded mono (5.16.0.179-1 -> 5.16.0.220-1)
Code : Tout sélectionner
2018-12-21 13:29] [ALPM] upgraded python-pytz (2018.7-1 -> 2018.7-2)
[2018-12-21 13:29] [ALPM] upgraded python-six (1.11.0-3 -> 1.12.0-1)
[2018-12-21 13:29] [ALPM] upgraded python2-six (1.11.0-3 -> 1.12.0-1)
[2018-12-21 13:29] [ALPM] upgraded smbclient (4.9.3-1 -> 4.9.4-1)
[2018-12-21 13:29] [ALPM] warning: directory permissions differ on /var/lib/samba/private/
filesystem: 755 package: 700
[2018-12-21 13:29] [ALPM] upgraded samba (4.9.3-1 -> 4.9.4-1)
[2018-12-21 13:29] [ALPM] upgraded systemd-sysvcompat (239.303-1 -> 239.370-1)
[2018-12-21 13:29] [ALPM] upgraded vala (0.42.3-2 -> 0.42.4-1)
[2018-12-21 13:29] [ALPM] upgraded virtualbox-host-modules-arch (5.2.22-10 -> 5.2.22-13)
[2018-12-21 13:29] [ALPM] upgraded wget (1.19.5-1 -> 1.20-1)
[2018-12-21 13:29] [ALPM] transaction completed
[2018-12-21 13:29] [ALPM] running '60-linux.hook'...
[2018-12-21 13:29] [ALPM] running '70-dkms-install.hook'...
[2018-12-21 13:29] [ALPM] running '90-linux.hook'...
[2018-12-21 13:29] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
Code : Tout sélectionner
2018-12-21 13:30] [ALPM] running 'detect-old-perl-modules.hook'...
[2018-12-21 13:30] [ALPM] running 'glib-compile-schemas.hook'...
[2018-12-21 13:30] [ALPM] running 'gtk-update-icon-cache.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-binfmt.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-catalog.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-daemon-reload.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-hwdb.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-sysctl.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-sysusers.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-tmpfiles.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-udev-reload.hook'...
[2018-12-21 13:30] [ALPM] running 'systemd-update.hook'...
[2018-12-21 13:30] [ALPM] running 'texinfo-install.hook'...
[2018-12-21 13:30] [ALPM] running 'update-desktop-database.hook'...
[2018-12-21 13:30] [ALPM] running 'update-mime-database.hook'...
Un autre truc bizarre j'ai essayé plein de gestionnaires de session seul LXDM fonctionne (GDM, SLIM, SDDM) j'ai aussi essayé d'autres environnements (cinnamon gnome) seul Lxdm fonctionne.
J'aimerai pouvoir retourner sous Mate que je préfère
Merci
- FoolEcho
- Maître du Kyudo
- Messages : 10707
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Faudrait jeter un œil aux logs de X et du gestionnaire de connexion...
«The following statement is not true. The previous statement is true.»
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Pour les Log, lequel est chargé le "0 "ou le" 1"?
Je pense que c'est vraiment un truc tout simple en basculant de tty1 à tty2 j'ai un écran correct , mais qui ne dure que quelques fractions de seconde
Je pense que c'est vraiment un truc tout simple en basculant de tty1 à tty2 j'ai un écran correct , mais qui ne dure que quelques fractions de seconde
- FoolEcho
- Maître du Kyudo
- Messages : 10707
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Le 0.
«The following statement is not true. The previous statement is true.»
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
C'est une histoire de configuration graphique
Chargés drivers nvidia je retrouve mon interface graphique mais en 1024 768 !!!!!!!! un peu frustrant !!!!
Merci foolEcho de ton attention
Chargés drivers nvidia je retrouve mon interface graphique mais en 1024 768 !!!!!!!! un peu frustrant !!!!
Merci foolEcho de ton attention
-
- Daikyu
- Messages : 69
- Inscription : mar. 07 nov. 2017, 20:59
- Localisation : Espagne-Valencia
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Salut momo4050,
tu as quoi comme carte graphique ?
Et tu utilisais quoi comme drivers nvidia? et maintenant tu utilises quoi comme drivers (je comprends que tu as changé de drivers) ?
Ensuite tu n'as pas posté le log de X.
tu as quoi comme carte graphique ?
Code : Tout sélectionner
lspci -k | grep -A 2 -E "(VGA|3D)"
Ensuite tu n'as pas posté le log de X.
HP Pavillon - AMD Phenom 9600 - 6Go - SSD
Nvidia GT 520
Dual boot : Archlinux Gnome -Ubuntu Mate
Nvidia GT 520
Dual boot : Archlinux Gnome -Ubuntu Mate
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Ce que je ne comprends pas c'est que je n'ai rien modifiélspci -k | grep -A 2 -E "(VGA|3D)"
01:00.0 VGA compatible controller: NVIDIA Corporation NV36 [GeForce FX 5700LE] (rev a1)
Subsystem: LeadTek Research Inc. NV36 [GeForce FX 5700LE]
Kernel driver in use: nouveau
Quant au log de X
Code : Tout sélectionner
24.086]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 24.086] Build Operating System: Linux Arch Linux
[ 24.086] Current Operating System: Linux archlinux 4.20.0-arch1-1-ARCH #1 SMP PREEMPT Mon Dec 24 03:00:40 UTC 2018 x86_64
[ 24.087] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b7d95f8c-1daf-4a72-8ba6-107472af3316 rw quiet
[ 24.087] Build Date: 25 October 2018 04:42:32PM
[ 24.087]
[ 24.087] Current version of pixman: 0.36.0
[ 24.087] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.087] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.087] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 5 18:45:01 2019
[ 24.129] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.154] (==) No Layout section. Using the first Screen section.
[ 24.154] (==) No screen section available. Using defaults.
[ 24.154] (**) |-->Screen "Default Screen Section" (0)
[ 24.154] (**) | |-->Monitor "<default monitor>"
[ 24.165] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.165] (==) Automatically adding devices
[ 24.165] (==) Automatically enabling devices
[ 24.165] (==) Automatically adding GPU devices
[ 24.165] (==) Automatically binding GPU devices
[ 24.165] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 24.203] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 24.203] Entry deleted from font path.
[ 24.215] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 24.215] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.215] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.215] (II) Module ABI versions:
[ 24.215] X.Org ANSI C Emulation: 0.4
[ 24.215] X.Org Video Driver: 24.0
[ 24.215] X.Org XInput driver : 24.1
[ 24.215] X.Org Server Extension : 10.0
[ 24.217] (++) using VT number 1
[ 24.217] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 24.218] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24.223] (--) PCI:*(1@0:0:0) 10de:0343:107d:29a8 rev 161, Mem @ 0xe8000000/16777216, 0xd0000000/268435456, BIOS @ 0x????????/131072
[ 24.223] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.223] (II) LoadModule: "glx"
[ 24.249] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.380] (II) Module glx: vendor="X.Org Foundation"
[ 24.380] compiled for 1.20.3, module version = 1.0.0
[ 24.380] ABI class: X.Org Server Extension, version 10.0
[ 24.380] (==) Matched nouveau as autoconfigured driver 0
[ 24.380] (==) Matched nv as autoconfigured driver 1
[ 24.380] (==) Matched modesetting as autoconfigured driver 2
[ 24.380] (==) Matched fbdev as autoconfigured driver 3
[ 24.380] (==) Matched vesa as autoconfigured driver 4
[ 24.380] (==) Assigned the driver to the xf86ConfigLayout
[ 24.380] (II) LoadModule: "nouveau"
[ 24.392] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 24.417] (II) Module nouveau: vendor="X.Org Foundation"
[ 24.417] compiled for 1.20.0, module version = 1.0.15
[ 24.417] Module class: X.Org Video Driver
[ 24.417] ABI class: X.Org Video Driver, version 24.0
[ 24.417] (II) LoadModule: "nv"
[ 24.418] (WW) Warning, couldn't open module nv
[ 24.418] (EE) Failed to load module "nv" (module does not exist, 0)
[ 24.418] (II) LoadModule: "modesetting"
[ 24.418] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.456] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.456] compiled for 1.20.3, module version = 1.20.3
[ 24.456] Module class: X.Org Video Driver
[ 24.456] ABI class: X.Org Video Driver, version 24.0
[ 24.457] (II) LoadModule: "fbdev"
[ 24.457] (WW) Warning, couldn't open module fbdev
[ 24.457] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 24.457] (II) LoadModule: "vesa"
[ 24.458] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.464] (II) Module vesa: vendor="X.Org Foundation"
[ 24.464] compiled for 1.20.0, module version = 2.4.0
[ 24.464] Module class: X.Org Video Driver
[ 24.464] ABI class: X.Org Video Driver, version 24.0
[ 24.464] (II) NOUVEAU driver
[ 24.464] (II) NOUVEAU driver for NVIDIA chipset families :
[ 24.464] RIVA TNT (NV04)
[ 24.464] RIVA TNT2 (NV05)
[ 24.464] GeForce 256 (NV10)
[ 24.464] GeForce 2 (NV11, NV15)
[ 24.464] GeForce 4MX (NV17, NV18)
[ 24.464] GeForce 3 (NV20)
[ 24.464] GeForce 4Ti (NV25, NV28)
[ 24.464] GeForce FX (NV3x)
[ 24.464] GeForce 6 (NV4x)
[ 24.464] GeForce 7 (G7x)
[ 24.464] GeForce 8 (G8x)
[ 24.464] GeForce GTX 200 (NVA0)
[ 24.464] GeForce GTX 400 (NVC0)
[ 24.464] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24.464] (II) VESA: driver for VESA chipsets: vesa
[ 24.464] (II) [drm] nouveau interface version: 1.3.1
[ 24.465] (WW) Falling back to old probe method for modesetting
[ 24.465] (II) Loading sub module "dri2"
[ 24.465] (II) LoadModule: "dri2"
[ 24.465] (II) Module "dri2" already built-in
[ 24.465] (--) NOUVEAU(0): Chipset: "NVIDIA NV36"
[ 24.465] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24.465] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 24.465] (==) NOUVEAU(0): RGB weight 888
[ 24.465] (==) NOUVEAU(0): Default visual is TrueColor
[ 24.465] (==) NOUVEAU(0): Using HW cursor
[ 24.465] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 24.465] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 24.465] (==) NOUVEAU(0): Page flipping enabled
[ 24.465] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 24.465] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 24.465] (II) NOUVEAU(0): Initializing outputs ...
[ 24.500] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 24.531] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 24.566] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 24.566] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 24.569] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 24.569] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 24.606] (II) NOUVEAU(0): EDID for output VGA-1
[ 24.637] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 24.637] (II) NOUVEAU(0): Manufacturer: SAM Model: 3e5 Serial#: 1415000626
[ 24.637] (II) NOUVEAU(0): Year: 2009 Week: 33
[ 24.637] (II) NOUVEAU(0): EDID Version: 1.3
[ 24.638] (II) NOUVEAU(0): Digital Display Input
[ 24.638] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 24.638] (II) NOUVEAU(0): Gamma: 2.20
[ 24.638] (II) NOUVEAU(0): DPMS capabilities: Off
[ 24.638] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 24.638] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 24.638] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 24.638] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 24.638] (II) NOUVEAU(0): Supported established timings:
[ 24.638] (II) NOUVEAU(0): 720x400@70Hz
[ 24.638] (II) NOUVEAU(0): 640x480@60Hz
[ 24.638] (II) NOUVEAU(0): 640x480@67Hz
[ 24.638] (II) NOUVEAU(0): 640x480@72Hz
[ 24.638] (II) NOUVEAU(0): 640x480@75Hz
[ 24.638] (II) NOUVEAU(0): 800x600@56Hz
[ 24.638] (II) NOUVEAU(0): 800x600@60Hz
[ 24.638] (II) NOUVEAU(0): 800x600@72Hz
[ 24.638] (II) NOUVEAU(0): 800x600@75Hz
[ 24.638] (II) NOUVEAU(0): 832x624@75Hz
[ 24.638] (II) NOUVEAU(0): 1024x768@60Hz
[ 24.638] (II) NOUVEAU(0): 1024x768@70Hz
[ 24.638] (II) NOUVEAU(0): 1024x768@75Hz
[ 24.638] (II) NOUVEAU(0): 1280x1024@75Hz
[ 24.638] (II) NOUVEAU(0): 1152x864@75Hz
[ 24.638] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 24.638] (II) NOUVEAU(0): Supported standard timings:
[ 24.638] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 24.638] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 24.638] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 24.638] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 24.638] (II) NOUVEAU(0): Supported detailed timing:
[ 24.638] (II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 24.638] (II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 24.638] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 24.638] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 24.638] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 24.638] (II) NOUVEAU(0): Serial No: H9MS810734
[ 24.638] (II) NOUVEAU(0): EDID (in hex):
[ 24.638] (II) NOUVEAU(0): 00ffffffffffff004c2de50332325754
[ 24.638] (II) NOUVEAU(0): 21130103802f1e782aee91a3544c9926
[ 24.638] (II) NOUVEAU(0): 0f5054bfef80b30081808140714f0101
[ 24.638] (II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
[ 24.638] (II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
[ 24.639] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
[ 24.639] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 24.639] (II) NOUVEAU(0): 0048394d533831303733340a20200034
[ 24.639] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 24.639] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 24.639] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.639] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24.673] (II) NOUVEAU(0): EDID for output TV-1
[ 24.673] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 24.673] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 24.673] (II) NOUVEAU(0): Output TV-1 disconnected
[ 24.673] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 24.673] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1680x1050 +0+0
[ 24.673] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 24.673] (II) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[ 24.673] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 24.673] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 24.673] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 24.673] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24.673] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 24.673] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 24.673] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 24.673] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.673] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 24.673] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24.673] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[ 24.673] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24.673] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.674] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 24.674] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24.674] (==) NOUVEAU(0): DPI set to (96, 96)
[ 24.674] (II) Loading sub module "fb"
[ 24.674] (II) LoadModule: "fb"
[ 24.674] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.688] (II) Module fb: vendor="X.Org Foundation"
[ 24.688] compiled for 1.20.3, module version = 1.0.0
[ 24.689] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.689] (II) Loading sub module "shadowfb"
[ 24.689] (II) LoadModule: "shadowfb"
[ 24.689] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 24.693] (II) Module shadowfb: vendor="X.Org Foundation"
[ 24.693] compiled for 1.20.3, module version = 1.0.0
[ 24.693] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.693] (II) UnloadModule: "modesetting"
[ 24.693] (II) Unloading modesetting
[ 24.694] (II) UnloadModule: "vesa"
[ 24.694] (II) Unloading vesa
[ 24.695] (II) NOUVEAU(0): Channel setup complete.
[ 24.716] (II) NOUVEAU(0): Hardware support for Present enabled
[ 24.717] (II) NOUVEAU(0): [DRI2] Setup complete
[ 24.717] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 24.717] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 24.717] (II) Loading sub module "exa"
[ 24.717] (II) LoadModule: "exa"
[ 24.718] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 24.728] (II) Module exa: vendor="X.Org Foundation"
[ 24.728] compiled for 1.20.3, module version = 2.6.0
[ 24.728] ABI class: X.Org Video Driver, version 24.0
[ 24.728] (II) EXA(0): Driver allocated offscreen pixmaps
[ 24.728] (II) EXA(0): Driver registered support for the following operations:
[ 24.728] (II) Solid
[ 24.728] (II) Copy
[ 24.728] (II) Composite (RENDER acceleration)
[ 24.728] (II) UploadToScreen
[ 24.728] (II) DownloadFromScreen
[ 24.728] (==) NOUVEAU(0): Backing store enabled
[ 24.728] (==) NOUVEAU(0): Silken mouse disabled
[ 24.728] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[ 24.728] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 24.728] (==) NOUVEAU(0): DPMS enabled
[ 24.736] (II) Initializing extension Generic Event Extension
[ 24.736] (II) Initializing extension SHAPE
[ 24.737] (II) Initializing extension MIT-SHM
[ 24.738] (II) Initializing extension XInputExtension
[ 24.738] (II) Initializing extension XTEST
[ 24.738] (II) Initializing extension BIG-REQUESTS
[ 24.738] (II) Initializing extension SYNC
[ 24.739] (II) Initializing extension XKEYBOARD
[ 24.739] (II) Initializing extension XC-MISC
[ 24.739] (II) Initializing extension SECURITY
[ 24.739] (II) Initializing extension XFIXES
[ 24.740] (II) Initializing extension RENDER
[ 24.740] (II) Initializing extension RANDR
[ 24.740] (II) Initializing extension COMPOSITE
[ 24.741] (II) Initializing extension DAMAGE
[ 24.741] (II) Initializing extension MIT-SCREEN-SAVER
[ 24.741] (II) Initializing extension DOUBLE-BUFFER
[ 24.741] (II) Initializing extension RECORD
[ 24.742] (II) Initializing extension DPMS
[ 24.742] (II) Initializing extension Present
[ 24.742] (II) Initializing extension DRI3
[ 24.742] (II) Initializing extension X-Resource
[ 24.742] (II) Initializing extension XVideo
[ 24.743] (II) Initializing extension XVideo-MotionCompensation
[ 24.743] (II) Initializing extension GLX
[ 26.625] (II) AIGLX: Loaded and initialized nouveau
[ 26.625] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 26.625] (II) Initializing extension XFree86-VidModeExtension
[ 26.626] (II) Initializing extension XFree86-DGA
[ 26.626] (II) Initializing extension XFree86-DRI
[ 26.626] (II) Initializing extension DRI2
[ 26.631] (II) NOUVEAU(0): NVEnterVT is called.
[ 26.632] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[ 26.632] resize called 1680 1050
[ 27.120] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 27.120] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 27.120] (II) LoadModule: "libinput"
[ 27.120] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 27.153] (II) Module libinput: vendor="X.Org Foundation"
[ 27.153] compiled for 1.20.1, module version = 0.28.1
[ 27.153] Module class: X.Org XInput Driver
[ 27.153] ABI class: X.Org XInput driver, version 24.1
[ 27.153] (II) Using input driver 'libinput' for 'Power Button'
[ 27.153] (**) Power Button: always reports core events
[ 27.153] (**) Option "Device" "/dev/input/event1"
[ 27.153] (**) Option "_source" "server/udev"
[ 27.246] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 27.246] (II) event1 - Power Button: device is a keyboard
[ 27.247] (II) event1 - Power Button: device removed
[ 27.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 27.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.268] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 27.268] (II) event1 - Power Button: device is a keyboard
[ 27.268] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 27.268] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 27.268] (II) Using input driver 'libinput' for 'Power Button'
[ 27.268] (**) Power Button: always reports core events
[ 27.268] (**) Option "Device" "/dev/input/event0"
[ 27.269] (**) Option "_source" "server/udev"
[ 27.270] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 27.270] (II) event0 - Power Button: device is a keyboard
[ 27.270] (II) event0 - Power Button: device removed
[ 27.289] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 27.289] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 27.291] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 27.291] (II) event0 - Power Button: device is a keyboard
[ 27.293] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event2)
[ 27.293] (**) CHICONY USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 27.293] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard'
[ 27.293] (**) CHICONY USB Keyboard: always reports core events
[ 27.293] (**) Option "Device" "/dev/input/event2"
[ 27.293] (**) Option "_source" "server/udev"
[ 27.295] (II) event2 - CHICONY USB Keyboard: is tagged by udev as: Keyboard
[ 27.295] (II) event2 - CHICONY USB Keyboard: device is a keyboard
[ 27.295] (II) event2 - CHICONY USB Keyboard: device removed
[ 27.313] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/0003:04F2:0111.0001/input/input2/event2"
[ 27.313] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 8)
[ 27.317] (II) event2 - CHICONY USB Keyboard: is tagged by udev as: Keyboard
[ 27.318] (II) event2 - CHICONY USB Keyboard: device is a keyboard
[ 27.320] (II) config/udev: Adding input device CHICONY USB Keyboard System Control (/dev/input/event3)
[ 27.320] (**) CHICONY USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 27.320] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard System Control'
[ 27.320] (**) CHICONY USB Keyboard System Control: always reports core events
[ 27.320] (**) Option "Device" "/dev/input/event3"
[ 27.320] (**) Option "_source" "server/udev"
[ 27.326] (II) event3 - CHICONY USB Keyboard System Control: is tagged by udev as: Keyboard
[ 27.326] (II) event3 - CHICONY USB Keyboard System Control: device is a keyboard
[ 27.326] (II) event3 - CHICONY USB Keyboard System Control: device removed
[ 27.326] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/0003:04F2:0111.0002/input/input3/event3"
[ 27.326] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard System Control" (type: KEYBOARD, id 9)
[ 27.329] (II) event3 - CHICONY USB Keyboard System Control: is tagged by udev as: Keyboard
[ 27.329] (II) event3 - CHICONY USB Keyboard System Control: device is a keyboard
[ 27.330] (II) config/udev: Adding input device CHICONY USB Keyboard Consumer Control (/dev/input/event4)
[ 27.330] (**) CHICONY USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 27.330] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard Consumer Control'
[ 27.330] (**) CHICONY USB Keyboard Consumer Control: always reports core events
[ 27.330] (**) Option "Device" "/dev/input/event4"
[ 27.330] (**) Option "_source" "server/udev"
[ 27.332] (II) event4 - CHICONY USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 27.332] (II) event4 - CHICONY USB Keyboard Consumer Control: device is a keyboard
[ 27.332] (II) event4 - CHICONY USB Keyboard Consumer Control: device removed
[ 27.390] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/0003:04F2:0111.0002/input/input4/event4"
[ 27.390] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard Consumer Control" (type: KEYBOARD, id 10)
[ 27.392] (II) event4 - CHICONY USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 27.392] (II) event4 - CHICONY USB Keyboard Consumer Control: device is a keyboard
[ 27.393] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[ 27.393] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 27.393] (II) Using input driver 'libinput' for 'USB Optical Mouse'
- benjarobin
- Maître du Kyudo
- Messages : 17257
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Tu utilises d'après le log le driver libre nouveau avec la bonne résolution. As tu des soucis avec une telle configuration ?
Si oui as tu essayé avec les drivers propriétaires, et si oui qu'as tu installé ?
Si oui as tu essayé avec les drivers propriétaires, et si oui qu'as tu installé ?
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Avant la mise à jour fatidique tout fonctionnait avec le driver nouveau.
Puis du jour au lendemain, plus d'accès à la session graphique (écran "freezé")
J'installe LXDE qui fonctionne (sauf le clavier que je dois redéfinir à chaque session)
J'installe le driver nvidia (pacman -S nvidia)
Je retrouve un accès graphiqie mais en 1024 768
Je vire nvidia et retour à la case départ
Puis du jour au lendemain, plus d'accès à la session graphique (écran "freezé")
J'installe LXDE qui fonctionne (sauf le clavier que je dois redéfinir à chaque session)
J'installe le driver nvidia (pacman -S nvidia)
Je retrouve un accès graphiqie mais en 1024 768
Je vire nvidia et retour à la case départ
- benjarobin
- Maître du Kyudo
- Messages : 17257
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Je n'avais pas fait attention, mais ta carte graphique est bien trop vielle, Arch Linux ne fournit plus de driver propriétaire pour ta carte graphique. Il t'aurait fallut la branche 173xx...
As tu essayé avec nouveau et le kernel LTS ?
As tu essayé avec nouveau et le kernel LTS ?
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Bonjour,
Fais ce test, crée un autre compte utilisateur, est-ce que tu as les même symptômes en tentant d'ouvrir une session graphique Mate avec ce nouveau compte ?
Fais ce test, crée un autre compte utilisateur, est-ce que tu as les même symptômes en tentant d'ouvrir une session graphique Mate avec ce nouveau compte ?
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Creer un nouvel utilisateur (avec useradd) le problème reste le même je reconnais l'écran "de base" Mate mais il est inutilisable.
l'environnement LXDE fonctionne !!!!!
l'environnement LXDE fonctionne !!!!!
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
c'est une histoire de résolution graphique (un écran apparaît quelques fractions de secondes)avant mon ancien bureau mate.
Pourquoi LXDE fonctionne t-il?
Au démarrage (je reboot souvent, en console, puisque impossible de sortir de Mate)
Au boot j'ai souvent "Update success" alors que je ne touche à rien !!!!
Pourquoi LXDE fonctionne t-il?
Au démarrage (je reboot souvent, en console, puisque impossible de sortir de Mate)
Au boot j'ai souvent "Update success" alors que je ne touche à rien !!!!
-
- Daikyu
- Messages : 69
- Inscription : mar. 07 nov. 2017, 20:59
- Localisation : Espagne-Valencia
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
As-tu testé de lancer Mate depuis la console via startx sans passer par un gestionnaire de connexion ?
HP Pavillon - AMD Phenom 9600 - 6Go - SSD
Nvidia GT 520
Dual boot : Archlinux Gnome -Ubuntu Mate
Nvidia GT 520
Dual boot : Archlinux Gnome -Ubuntu Mate
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
Ca ne fonctionne pas
Code : Tout sélectionner
[bruno@archlinux ~]$ startx /usr/bin/mate-session
/usr/lib/Xorg.wrap: Only console users are allowed to run the X server
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Couldn't get a file descriptor referring to the console
-
- Daikyu
- Messages : 69
- Inscription : mar. 07 nov. 2017, 20:59
- Localisation : Espagne-Valencia
Re: [mate] Plus de gestion graphique après mise à jour(en cours)
quand je disais en console c'était en tty et en désactivant ton gestionnaire de connexion, je crois que tu l'as fait depuis un terminal.
HP Pavillon - AMD Phenom 9600 - 6Go - SSD
Nvidia GT 520
Dual boot : Archlinux Gnome -Ubuntu Mate
Nvidia GT 520
Dual boot : Archlinux Gnome -Ubuntu Mate