J'ai installé Archlinux, tout s'est bien déroulé, mais j'ai pas mal galéré pour avoir accès au réseau et terminer l'install.
En effet je suis relié à internet seulement par Wifi.
J'ai finalement réussi donc la configuration est bonne, c'est sûr.
Maintenant j'ai pas réussi a la faire demarrer au demarrage, j'ai pourant suivi le tuto, créé un profile etc.. mais au demarrage, je ne vois que lo et eth0 s'initialiser, mon wlan0 est oublié, alors que j'l'ai mis dans rc.conf...
Donc ma solution a l'arrache :
Dans rc.multi :
Code : Tout sélectionner
/sbin/ifconfig wlan0 up
/usr/sbin/wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
/sbin/dhcpcd wlan0
-----------
rc.conf :
Code : Tout sélectionner
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(eth0 wlan0)
Code : Tout sélectionner
NETWORKS=(freebox)
Code : Tout sélectionner
#
# Network Profile
#
DESCRIPTION="Reseau sans fil WPA en dhcp"
# Network Settings
INTERFACE=wlan0
HOSTNAME=myhost
# Interface Settings (use IFOPTS="dhcp" for DHCP)
#IFOPTS="192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
IFOPTS="dhcp"
GATEWAY=192.168.0.254 # adresse du routeur wifi
# DNS Settings (optional)
#DOMAIN=localdomain
#DNS1=192.168.0.1
#DNS2=
# Wireless Settings (optional)
ESSID=chambre306FreeboxAPartager
IWOPTS="mode managed essid $ESSID"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
#AUTOWPA="yes" # automatically configure WPA
#PASSKEY="" # wpa passkey/phrase. for use with AUTOWPA
Code : Tout sélectionner
network={
ssid="chambre306FreeboxAPartager"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="****************"
priority=2
}
si vous avez besoin d'autres fichiers, pas d eproblemes
Ah oui, je veux aussi ajouter que je configure "parfaitement" avec le demon network pour ensuite passer a networkmanager.
++ B.