[kernel-2.6.31] Perte du support USB

[m0g]

Bonjour à tous,
suite à une mise à jours de mon pc, j'ai perdu le support de l'usb. Je pense que cela viens du nouveau noyau. De plus je tiens à preciser que même la commande fdisk -l ne detecte pas les clé usb que j'introduit.

En vous remerciant d'avance pour votre aide.

[FredBezies]

Essaye de voir ce que te dit un petit :

Code : Tout sélectionner

less /var/log/everything.log | grep usb

[m0g]

Voilà pour le resultat de cette commande less /var/log/everything.log | grep usb

Code : Tout sélectionner

Oct 14 05:41:40 akoya kernel: usbcore: registered new interface driver usbfs
Oct 14 05:41:40 akoya kernel: usbcore: registered new interface driver hub
Oct 14 05:41:40 akoya kernel: usbcore: registered new device driver usb
Oct 14 05:41:40 akoya kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 14 05:41:40 akoya kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Oct 14 05:41:40 akoya kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 14 05:41:40 akoya kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 14 05:41:40 akoya kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 14 05:41:40 akoya kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 14 05:41:40 akoya kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 14 05:41:40 akoya kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Oct 14 05:41:40 akoya kernel: usb 1-6: configuration #1 chosen from 1 choice
Oct 14 05:41:40 akoya kernel: usb-storage: device found at 3
Oct 14 05:41:40 akoya kernel: usb-storage: waiting for device to settle before scanning
Oct 14 05:41:40 akoya kernel: usbcore: registered new interface driver usb-storage
Oct 14 05:41:40 akoya kernel: input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input10
Oct 14 05:41:40 akoya kernel: usbcore: registered new interface driver uvcvideo
Oct 14 05:41:40 akoya kernel: usb-storage: device scan complete
Oct 14 05:48:04 akoya load-modules.sh: 'usb:v5986p0141d0304dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Oct 14 05:47:10 akoya kernel: usb 1-2: new high speed USB device using ehci_hcd and address 4
Oct 14 05:47:10 akoya kernel: usb 1-2: configuration #1 chosen from 1 choice
Oct 14 05:47:11 akoya kernel: phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
Oct 14 05:47:11 akoya kernel: usbcore: registered new interface driver rt2500usb
Oct 14 05:47:11 akoya kernel: Registered led device: rt73usb-phy1::radio
Oct 14 05:47:11 akoya kernel: Registered led device: rt73usb-phy1::assoc
Oct 14 05:47:11 akoya kernel: Registered led device: rt73usb-phy1::quality
Oct 14 05:47:11 akoya kernel: usbcore: registered new interface driver rt73usb
Oct 14 05:47:11 akoya NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'rt73usb')
Oct 14 05:47:16 akoya kernel: rt73usb 1-2:1.0: firmware: requesting rt73.bin
Oct 14 05:48:26 akoya kernel: usb 1-2: USB disconnect, address 4
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Oct 14 05:48:26 akoya kernel: phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Oct 14 11:15:24 akoya kernel: usbcore: registered new interface driver usbfs
Oct 14 11:15:24 akoya kernel: usbcore: registered new interface driver hub
Oct 14 11:15:24 akoya kernel: usbcore: registered new device driver usb
Oct 14 11:15:24 akoya kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 14 11:15:24 akoya kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 14 11:15:24 akoya kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 14 11:15:24 akoya kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 14 11:15:24 akoya kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 14 11:15:24 akoya kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Oct 14 11:15:24 akoya kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 14 11:15:24 akoya kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Oct 14 11:15:24 akoya kernel: usb 1-6: configuration #1 chosen from 1 choice
Oct 14 11:15:24 akoya kernel: usbcore: registered new interface driver usb-storage
Oct 14 11:15:24 akoya kernel: usb-storage: device found at 3
Oct 14 11:15:24 akoya kernel: usb-storage: waiting for device to settle before scanning
Oct 14 11:15:24 akoya kernel: input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6
Oct 14 11:15:24 akoya kernel: usbcore: registered new interface driver uvcvideo
Oct 14 11:15:24 akoya kernel: usb-storage: device scan complete
Oct 14 11:16:59 akoya load-modules.sh: 'usb:v5986p0141d0304dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Oct 14 11:17:16 akoya kernel: usbcore: registered new interface driver usbfs
Oct 14 11:17:16 akoya kernel: usbcore: registered new interface driver hub
Oct 14 11:17:16 akoya kernel: usbcore: registered new device driver usb
Oct 14 11:17:16 akoya kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 14 11:17:16 akoya kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 14 11:17:16 akoya kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 14 11:17:16 akoya kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 14 11:17:16 akoya kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 14 11:17:16 akoya kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Oct 14 11:17:16 akoya kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 14 11:17:16 akoya kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Oct 14 11:17:16 akoya kernel: usb 1-6: configuration #1 chosen from 1 choice
Oct 14 11:17:16 akoya kernel: usbcore: registered new interface driver usb-storage
Oct 14 11:17:16 akoya kernel: usb-storage: device found at 3
Oct 14 11:17:16 akoya kernel: usb-storage: waiting for device to settle before scanning
Oct 14 11:17:16 akoya kernel: input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6
Oct 14 11:17:16 akoya kernel: usbcore: registered new interface driver uvcvideo
Oct 14 11:17:16 akoya kernel: usb-storage: device scan complete
Oct 14 11:17:07 akoya load-modules.sh: 'usb:v5986p0141d0304dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Oct 14 12:28:42 akoya kernel: usbcore: registered new interface driver usbfs
Oct 14 12:28:42 akoya kernel: usbcore: registered new interface driver hub
Oct 14 12:28:42 akoya kernel: usbcore: registered new device driver usb
Oct 14 12:28:42 akoya kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 14 12:28:42 akoya kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 14 12:28:42 akoya kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 14 12:28:42 akoya kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 14 12:28:42 akoya kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 14 12:28:42 akoya kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Oct 14 12:28:42 akoya kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 14 12:28:42 akoya kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Oct 14 12:28:42 akoya kernel: usb 1-6: configuration #1 chosen from 1 choice
Oct 14 12:28:42 akoya kernel: usb-storage: device found at 3
Oct 14 12:28:42 akoya kernel: usb-storage: waiting for device to settle before scanning
Oct 14 12:28:42 akoya kernel: usbcore: registered new interface driver usb-storage
Oct 14 12:28:42 akoya kernel: input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Oct 14 12:28:42 akoya kernel: usbcore: registered new interface driver uvcvideo
Oct 14 12:28:42 akoya kernel: usb-storage: device scan complete
Oct 14 12:28:50 akoya load-modules.sh: 'usb:v5986p0141d0304dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Oct 14 13:22:21 akoya kernel: usbcore: registered new interface driver usbfs
Oct 14 13:22:21 akoya kernel: usbcore: registered new interface driver hub
Oct 14 13:22:21 akoya kernel: usbcore: registered new device driver usb
Oct 14 13:22:21 akoya kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 14 13:22:21 akoya kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 14 13:22:21 akoya kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 14 13:22:21 akoya kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 14 13:22:21 akoya kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 14 13:22:21 akoya kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Oct 14 13:22:21 akoya kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 14 13:22:21 akoya kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Oct 14 13:22:21 akoya kernel: usb 1-6: configuration #1 chosen from 1 choice
Oct 14 13:22:21 akoya kernel: usbcore: registered new interface driver usb-storage
Oct 14 13:22:21 akoya kernel: usb-storage: device found at 3
Oct 14 13:22:21 akoya kernel: usb-storage: waiting for device to settle before scanning
Oct 14 13:22:21 akoya kernel: input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input9
Oct 14 13:22:21 akoya kernel: usbcore: registered new interface driver uvcvideo
Oct 14 13:22:21 akoya kernel: usb-storage: device scan complete
Oct 14 13:22:26 akoya load-modules.sh: 'usb:v5986p0141d0304dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Oct 14 16:32:05 akoya kernel: usbcore: registered new interface driver usbfs
Oct 14 16:32:05 akoya kernel: usbcore: registered new interface driver hub
Oct 14 16:32:05 akoya kernel: usbcore: registered new device driver usb
Oct 14 16:32:05 akoya kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 14 16:32:05 akoya kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 14 16:32:05 akoya kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 14 16:32:05 akoya kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 14 16:32:05 akoya kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 14 16:32:05 akoya kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Oct 14 16:32:05 akoya kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 14 16:32:05 akoya kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Oct 14 16:32:05 akoya kernel: usb 1-6: configuration #1 chosen from 1 choice
Oct 14 16:32:05 akoya kernel: usb-storage: device found at 3
Oct 14 16:32:05 akoya kernel: usb-storage: waiting for device to settle before scanning
Oct 14 16:32:05 akoya kernel: usbcore: registered new interface driver usb-storage
Oct 14 16:32:05 akoya kernel: input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6
Oct 14 16:32:05 akoya kernel: usbcore: registered new interface driver uvcvideo
Oct 14 16:32:05 akoya kernel: usb-storage: device scan complete
Oct 14 16:32:31 akoya load-modules.sh: 'usb:v5986p0141d0304dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name

[Bismut]

Idem, perte de l'USB, c'est bien embêtant =/

[indiana tux]

La même... Enfin presque, en fait, il n'y a que mon DD usb (en fat32) qui soit totalement invisible. Je sais que ce n'est pas un problème materiel puisque si je passe par Back Track ou Mint, il est reconnu et monté immédiatement. Par contre un DD usb en ntfs ou une clef usb en fat16 est reconnu sans problème... J'ai 2 pc à la maison qui tourne sur Arch, les deux me font la même chose.

Comme la mise à jour que j'ai faite est assez grosse, j'ai encore du mal à déterminer si c'est bien un problème de kernel.

[Bismut]

DD externe en Ext3 pour moi.

[tuxce]

tu utilises gnome? ou tu as devicekit-disks d'installé?
il y a une incompatibilité entre ce paquet et libatasmart, si tu peux t'en passer, désinstalle le sinon regarde si installer libatasmart depuis aur résoud le problème.

[Bismut]

Alors je ne maitrise encore pas trop la recherche, il me semble que c'est yaourt -Ss mais parfois je n'ai aucun retour, c'est normal ?

Code : Tout sélectionner

[raph@myhost ~]$ yaourt devicekits-disk
[raph@myhost ~]$ yaourt -Ss devicekits-disk
[raph@myhost ~]$ sudo pacman -Ss devicekits-disk
Mot de passe : 
[raph@myhost ~]$ yaourt -Ss libatasmart
extra/libatasmart 0.14-1 [installé] 
     ATA S.M.A.R.T. Reading and Parsing Library
aur/libatasmart-git 20090712-1 (0)
    ATA S.M.A.R.T. reading and parsing library
[raph@myhost ~]$ 

Sinon apparemment, libatasmart est installé, c'est normal ?
Dois-je installer la version de AUR ? Je préfèrerais garder de Extra pour avoir les MAJ continues...

Est-ce que tout le monde a ce problème d'USB ? Ou bien c'est moi (enfin quelques uns d'entre nous) ?

[indiana tux]

Merci Tuxce (encore une fois), remplacer libatasmart 14 par le 15 (celui de AUR) résoud effectivement le problème. D'ailleurs c'est un bug connu depuis la sortie de gnome 2.28, ils en parlent sur le forum Anglais.

@ Bismut : tu tapes simplement

Code : Tout sélectionner

yaourt libatasmart

Tu auras en retour une liste, il te suffit de donner le numéro pour l'installer. Si tu installe le libatasmart de AUR, le remplacement se fait automatiquement, pas besoin de desinstaller celui d'extra. Rien ne t'empêchera par la suite de réinstaller celui d'extra quand la mise à jour officielle aura lieu. Et sinon on peut mettre les paquets d'AUR à jour

Code : Tout sélectionner

yaourt -Syu --aur

Donc rien à voir avec le Kernel.

PS: avoue Tuxce! C'est toi Judd Vinet.

[tuxce]

Alors je ne maitrise encore pas trop la recherche

tu peux te référer au wiki pour la doc sur pacman (ou même le man)
sinon, j'ai mis un s en trop dans devicekit(s)-disks, mais t'es pas obligé de mettre le nom en entier !

Sinon apparemment, libatasmart est installé, c'est normal ?

oui, mais la version actuelle n'est pas compatible

Est-ce que tout le monde a ce problème d'USB ?

c'est pour te sentir moins seul ?
ça dépend du périphérique et bien sûr, c'est pour ceux qui ont les paquets que j'ai cité.

[Bismut]

@ Bismut : tu tapes simplement

Code : Tout sélectionner

yaourt libatasmart

Tu auras en retour une liste, il te suffit de donner le numéro pour l'installer. Si tu installe le libatasmart de AUR, le remplacement se fait automatiquement, pas besoin de desinstaller celui d'extra. Rien ne t'empêchera par la suite de réinstaller celui d'extra quand la mise à jour officielle aura lieu. Et sinon on peut mettre les paquets d'AUR à jour

Code : Tout sélectionner

yaourt -Syu --aur

Donc rien à voir avec le Kernel.

Oki. Bon, j'ai cherché libatasmart, mais je ne trouve qu'une version libatasmart-git qui ne compile pas bien depuis AUR :

Code : Tout sélectionner

[raph@myhost ~]$ yaourt libatasmart
1 extra/libatasmart 0.14-1 [installé] 
     ATA S.M.A.R.T. Reading and Parsing Library
2 aur/libatasmart-git 20090712-1 (0)
    ATA S.M.A.R.T. reading and parsing library
==>  Entrez les n° (séparés par un espace, ou une intervalle) des paquetages à installer
==>   ----------------------------------------------
==>2

==> Téléchargement du PKGBUILD de libatasmart-git depuis AUR...
tar: Taille de l'enregistrement = 6 blocs

	
      First Submitted: Sun, 12 Jul 2009 19:23:51 +0000	
libatasmart-git 20090712-1 : ATA S.M.A.R.T. reading and parsing library
( Paquetage non supporté: Potentiellement dangereux ! )
==>  Editer le PKGBUILD (chaudement recommandé pour raison de sécurité) ? [O/n]("A" pour annuler)
==>   ----------------------------------------------
==>n

==>  Continuer la compilation de libatasmart-git? [O/n]
==>   ----------------------------------------------
==>o


==> Installation ou compilation des dépendances de libatasmart-git:
==> Compilation et installation du paquetage
mkdir: ne peut créer le répertoire `/var/abs': Permission non accordée
==> WARNING: Impossible d'écrire dans le répertoire /var/abs/local/yaourtbuild/libatasmart-git. Utilisation du répertoire /tmp
==> Détermination de la dernière révision git...
  -> Version trouvée        : 20091016
==> Création du paquet libatasmart-git 20091016-1 x86_64 (ven. oct. 16 14:20:52 CEST 2009)
==> Vérification des dépendances...
==> Vérification des dépendances pour la compilation...
==> Récupération des sources...
==> Extraction des sources...
==> Entre dans l'environnement fakeroot...
==> Début de la compilation...
==> Connecting to GIT server....
Initialized empty Git repository in /tmp/yaourt-tmp-raph/aur-libatasmart-git/libatasmart-git/src/libatasmart/.git/
remote: Counting objects: 643, done.
remote: Compressing objecReceiving objects:  53% (341/643), 116.00 KiB | 170 KiBremote: Compressing objects:  53% (1Receiving objects:  66% (425/643), 116.00 Kiremote: Compressing objects:  Receiving objects:  93% (598/643), 116.00 KiB | 17remote: Compressing objReceiving objects:  98% (631/643), 116.00 KiB | 170 KiB/sReceiving objects: 100% (643/643), 162.88 KiB | 170 KiB/s, done.
remote: Compressing objects: 100% (234/234), done.
remote: Total 643 (delta 406), reused 643 (delta 406)
Resolving deltas: 100% (406/406), done.
==> GIT checkout done or server timeout
==> Starting make...
Initialized empty Git repository in /tmp/yaourt-tmp-raph/aur-libatasmart-git/libatasmart-git/src/build/.git/
+ '[' x--prefix=/usr = xam ']'
+ rm -rf autom4te.cache
+ rm -f config.cache
+ touch config.rpath
+ test x = x
+ LIBTOOLIZE=libtoolize
+ mkdir -p m4
+ libtoolize -c --force
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
libtoolize: copying file `m4/libtool.m4'
libtoolize: copying file `m4/ltoptions.m4'
libtoolize: copying file `m4/ltsugar.m4'
libtoolize: copying file `m4/ltversion.m4'
libtoolize: copying file `m4/lt~obsolete.m4'
+ run_versioned aclocal 1.11
+ local P
+ local V
++ echo 1.11
++ sed -e 's,\.,,g'
+ V=111
++ which aclocal111
+ '[' -e '' ']'
++ which aclocal-1.11
+ '[' -e /usr/bin/aclocal-1.11 ']'
+ P=aclocal-1.11
+ shift 2
+ aclocal-1.11
sh: autom4te : commande introuvable
aclocal-1.11: autom4te failed with exit status: 127
make: *** Pas de cibles spécifiées et aucun makefile n'a été trouvé. Arrêt.
==> ERREUR: La compilation a échoué.
    Abandon...
Error: Makepkg n'a pas pu construire le paquetage libatasmart-git.

[raph@myhost ~]$ 

[tuxce]

Code : Tout sélectionner

wget http://aur.archlinux.org/packages/libatasmart/libatasmart.tar.gz -O - | tar zxvf -
cd libatasmart
makepkg -i

mais bon ils vont le supprimer parce que ça ne suit pas les règles, un package dans aur ne peut pas avoir le même nom qu'un autre dans un dépôt officiel.

sinon, faut se documenter sur abs, refaire un paquet en se basant sur celui existant est d'une simplicité déconcertante surtout quand c'est juste le numéro de version à changer (et le md5sum bien sûr)

[Bismut]

Merci beaucoup, tes lignes de commande fonctionnent très bien et ont résolu le problème, effectivement.

Juste pour ne pas mourir idiot : En fait, c'est un espèce de mini-fichier pour Package AUR que tu m'as fait tapé ? Est-ce que libatasmart continuera de se mettre à jour normalement via extra si une version plus récente apparait ?
Sinon, comment se fait-ce que tu aies pu trouvé cette version sur AUR alors que via mon terminal et via la plateforme Web de AUR, je n'ai trouvé que libatasmart-git ?

[indiana tux]

Pour essayer de te répondre :
- Tu n'as pas desinstaller le Libatasmart d'extra, donc normalement lorsque le paquetage se mettra à jour, et que la version d'extra sera supérieure à celle de AUR, elle devrait remplacer celle que tu viens d'installer (que l'on me fouette si je raconte n'importe quoi)

- A prioris, le libatasmart dont je me suis servis dans AUR a été supprimé juste après, lorsque je tape "yaourt libatasmart", je ne le trouve plus, la ligne que t'as fait taper Tuxce te permet de le récupérer directement sur AUR (le cache?).

ps : ce serait sympa de mettre le post en résolu si la solution donnée ici à permis à mOg de résoudre son problème.

[m0g]

Ca fait plaisir de voir que ce sujet a bien évoluer en mon absence.

tu utilises gnome? ou tu as devicekit-disks d'installé?

Pour repondre à tuxce, je n'ai ni l'un, ni l'autre d'installé, je suis sous openbox.

Code : Tout sélectionner

wget http://aur.archlinux.org/packages/libatasmart/libatasmart.tar.gz -O - | tar zxvf -
cd libatasmart
makepkg -i

J'ai essayer cette manipulation, j'ai à present libatasmart d'installer

Code : Tout sélectionner

pacman -Qs libatasmart
local/libatasmart 0.15-1

Mais malheureusement, lorsque j'effectue un fdisk -l, je ne vois toujours pas ma clé usb,

[tuxce]

avant de brancher ta clé, lance dans un terminal:

Code : Tout sélectionner

tail -f /var/log/messages.log

mets une séparation entre les lignes avec [entrée] et branché la, puis poste ce qui se rajoute.
(attends un peu genre 20 sec, histoire d'avoir la totalité s'il y a une détection qui prend du temps).

@Bismut, le lien que je t'ai passé n'est autre que le lien normal pour accéder à une archive AUR, j'ai tenté pour voir s'ils l'avaient enlevé pour de vrai, c'était pas le cas, ils ont juste enlevé l'accès par l'application web.

[Bismut]

@Bismut, le lien que je t'ai passé n'est autre que le lien normal pour accéder à une archive AUR, j'ai tenté pour voir s'ils l'avaient enlevé pour de vrai, c'était pas le cas, ils ont juste enlevé l'accès par l'application web.

Oki, c'est bon à savoir, je note
Merci.

[m0g]

J'ai l'impression que rien ne s'affiche.
Je poste mon messages.log de la journée, désolé, ca fait peut-être un peu trop:

Code : Tout sélectionner

Oct 19 04:54:21 akoya kernel: Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Tue Oct 13 13:36:23 CEST 2009
Oct 19 04:54:21 akoya kernel: KERNEL supported cpus:
Oct 19 04:54:21 akoya kernel: Intel GenuineIntel
Oct 19 04:54:21 akoya kernel: AMD AuthenticAMD
Oct 19 04:54:21 akoya kernel: NSC Geode by NSC
Oct 19 04:54:21 akoya kernel: Cyrix CyrixInstead
Oct 19 04:54:21 akoya kernel: Centaur CentaurHauls
Oct 19 04:54:21 akoya kernel: Transmeta GenuineTMx86
Oct 19 04:54:21 akoya kernel: Transmeta TransmetaCPU
Oct 19 04:54:21 akoya kernel: UMC UMC UMC UMC
Oct 19 04:54:21 akoya kernel: BIOS-provided physical RAM map:
Oct 19 04:54:21 akoya kernel: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 0000000000100000 - 000000003f5b2000 (usable)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f5d5000 - 000000003f5e6000 (reserved)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f5e9000 - 000000003f605000 (reserved)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f605000 - 000000003f606000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f606000 - 000000003f608000 (reserved)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f608000 - 000000003f611000 (ACPI data)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f611000 - 000000003f617000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 000000003f617000 - 000000003f700000 (reserved)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
Oct 19 04:54:21 akoya kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Oct 19 04:54:21 akoya kernel: DMI 2.4 present.
Oct 19 04:54:21 akoya kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Oct 19 04:54:21 akoya kernel: last_pfn = 0x3f5b2 max_arch_pfn = 0x100000
Oct 19 04:54:21 akoya kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 19 04:54:21 akoya kernel: Scanning 0 areas for low memory corruption
Oct 19 04:54:21 akoya kernel: modified physical RAM map:
Oct 19 04:54:21 akoya kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 0000000000010000 - 000000000009ec00 (usable)
Oct 19 04:54:21 akoya kernel: modified: 000000000009ec00 - 00000000000a0000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 00000000000e0000 - 0000000000100000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 0000000000100000 - 000000003f5b2000 (usable)
Oct 19 04:54:21 akoya kernel: modified: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: modified: 000000003f5d5000 - 000000003f5e6000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: modified: 000000003f5e9000 - 000000003f605000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 000000003f605000 - 000000003f606000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: modified: 000000003f606000 - 000000003f608000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 000000003f608000 - 000000003f611000 (ACPI data)
Oct 19 04:54:21 akoya kernel: modified: 000000003f611000 - 000000003f617000 (ACPI NVS)
Oct 19 04:54:21 akoya kernel: modified: 000000003f617000 - 000000003f700000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
Oct 19 04:54:21 akoya kernel: modified: 00000000fff00000 - 0000000100000000 (reserved)
Oct 19 04:54:21 akoya kernel: init_memory_mapping: 0000000000000000-00000000377fe000
Oct 19 04:54:21 akoya kernel: RAMDISK: 3f501000 - 3f5a1fdd
Oct 19 04:54:21 akoya kernel: Allocated new RAMDISK: 00100000 - 001a0fdd
Oct 19 04:54:21 akoya kernel: Move RAMDISK from 000000003f501000 - 000000003f5a1fdc to 00100000 - 001a0fdc
Oct 19 04:54:21 akoya kernel: ACPI: RSDP 000f03c0 00024 (v02 MEDION)
Oct 19 04:54:21 akoya kernel: ACPI: XSDT 3f60ff10 0005C (v01 MEDION MEDIONAG 06222004 MSFT 00010013)
Oct 19 04:54:21 akoya kernel: ACPI: FACP 3f5e6c10 000F4 (v04 MEDION MEDIONAG 06222004 MSFT 00010013)
Oct 19 04:54:21 akoya kernel: ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! 20090521 tbfadt-370
Oct 19 04:54:21 akoya kernel: ACPI Warning: 32/64X FACS address mismatch in FADT - 3F611E40/000000003F611D40, using 32 20090521 tbfadt-487
Oct 19 04:54:21 akoya kernel: ACPI: DSDT 3f608010 05315 (v01 MEDION MEDIONAG 00000000 INTL 20051117)
Oct 19 04:54:21 akoya kernel: ACPI: FACS 3f611e40 00040
Oct 19 04:54:21 akoya kernel: ACPI: APIC 3f610e90 0005C (v02 MEDION MEDIONAG 06222004 MSFT 00010013)
Oct 19 04:54:21 akoya kernel: ACPI: MCFG 3f615c90 0003C (v01 MEDION MEDIONAG 06222004 MSFT 00000097)
Oct 19 04:54:21 akoya kernel: ACPI: SLIC 3f612c10 00176 (v01 MEDION MEDIONAG 06222004 MSFT 00000097)
Oct 19 04:54:21 akoya kernel: ACPI: SSDT 3f605510 004CE (v02  PmRef    CpuPm 00003000 INTL 20051117)
Oct 19 04:54:21 akoya kernel: ACPI: SSDT 3f5e8a10 00232 (v02  PmRef  Cpu0Tst 00003000 INTL 20051117)
Oct 19 04:54:21 akoya kernel: ACPI: SSDT 3f611a10 000A0 (v02  PmRef  Cpu1Tst 00003000 INTL 20051117)
Oct 19 04:54:21 akoya kernel: 125MB HIGHMEM available.
Oct 19 04:54:21 akoya kernel: 887MB LOWMEM available.
Oct 19 04:54:21 akoya kernel: mapped low ram: 0 - 377fe000
Oct 19 04:54:21 akoya kernel: low ram: 0 - 377fe000
Oct 19 04:54:21 akoya kernel: node 0 low ram: 00000000 - 377fe000
Oct 19 04:54:21 akoya kernel: node 0 bootmap 00011000 - 00017f00
Oct 19 04:54:21 akoya kernel: (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Oct 19 04:54:21 akoya kernel: #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Oct 19 04:54:21 akoya kernel: #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 19 04:54:21 akoya kernel: #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 19 04:54:21 akoya kernel: #3 [0001000000 - 000156da44]    TEXT DATA BSS ==> [0001000000 - 000156da44]
Oct 19 04:54:21 akoya kernel: #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
Oct 19 04:54:21 akoya kernel: #5 [000156e000 - 0001574178]              BRK ==> [000156e000 - 0001574178]
Oct 19 04:54:21 akoya kernel: #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
Oct 19 04:54:21 akoya kernel: #7 [0000100000 - 00001a0fdd]      NEW RAMDISK ==> [0000100000 - 00001a0fdd]
Oct 19 04:54:21 akoya kernel: #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
Oct 19 04:54:21 akoya kernel: Zone PFN ranges:
Oct 19 04:54:21 akoya kernel: DMA      0x00000010 -> 0x00001000
Oct 19 04:54:21 akoya kernel: Normal   0x00001000 -> 0x000377fe
Oct 19 04:54:21 akoya kernel: HighMem  0x000377fe -> 0x0003f5b2
Oct 19 04:54:21 akoya kernel: Movable zone start PFN for each node
Oct 19 04:54:21 akoya kernel: early_node_map[2] active PFN ranges
Oct 19 04:54:21 akoya kernel: 0: 0x00000010 -> 0x0000009e
Oct 19 04:54:21 akoya kernel: 0: 0x00000100 -> 0x0003f5b2
Oct 19 04:54:21 akoya kernel: Using APIC driver default
Oct 19 04:54:21 akoya kernel: ACPI: PM-Timer IO Port: 0x408
Oct 19 04:54:21 akoya kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Oct 19 04:54:21 akoya kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Oct 19 04:54:21 akoya kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 19 04:54:21 akoya kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Oct 19 04:54:21 akoya kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 19 04:54:21 akoya kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 19 04:54:21 akoya kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 19 04:54:21 akoya kernel: Using ACPI (MADT) for SMP configuration information
Oct 19 04:54:21 akoya kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 19 04:54:21 akoya kernel: PM: Registered nosave memory: 000000000009e000 - 000000000009f000
Oct 19 04:54:21 akoya kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 19 04:54:21 akoya kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Oct 19 04:54:21 akoya kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Oct 19 04:54:21 akoya kernel: Allocating PCI resources starting at 3f700000 (gap: 3f700000:c0400000)
Oct 19 04:54:21 akoya kernel: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Oct 19 04:54:21 akoya kernel: PERCPU: Embedded 14 pages at c1d69000, static data 34332 bytes
Oct 19 04:54:21 akoya kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257364
Oct 19 04:54:21 akoya kernel: Kernel command line: root=/dev/disk/by-uuid/176260c1-1064-45b1-a4eb-114b217efafd ro vga=789
Oct 19 04:54:21 akoya kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 19 04:54:21 akoya kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 19 04:54:21 akoya kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 19 04:54:21 akoya kernel: Enabling fast FPU save and restore... done.
Oct 19 04:54:21 akoya kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 19 04:54:21 akoya kernel: Initializing CPU#0
Oct 19 04:54:21 akoya kernel: Initializing HighMem for node 0 (000377fe:0003f5b2)
Oct 19 04:54:21 akoya kernel: Memory: 1021916k/1038024k available (3109k kernel code, 15300k reserved, 1121k data, 416k init, 128720k highmem)
Oct 19 04:54:21 akoya kernel: virtual kernel memory layout:
Oct 19 04:54:21 akoya kernel: fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
Oct 19 04:54:21 akoya kernel: pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 19 04:54:21 akoya kernel: vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Oct 19 04:54:21 akoya kernel: lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Oct 19 04:54:21 akoya kernel: .init : 0xc1422000 - 0xc148a000   ( 416 kB)
Oct 19 04:54:21 akoya kernel: .data : 0xc130976d - 0xc1421e68   (1121 kB)
Oct 19 04:54:21 akoya kernel: .text : 0xc1000000 - 0xc130976d   (3109 kB)
Oct 19 04:54:21 akoya kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 19 04:54:21 akoya kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 19 04:54:21 akoya kernel: NR_IRQS:512
Oct 19 04:54:21 akoya kernel: Extended CMOS year: 2000
Oct 19 04:54:21 akoya kernel: Fast TSC calibration using PIT
Oct 19 04:54:21 akoya kernel: Detected 1599.978 MHz processor.
Oct 19 04:54:21 akoya kernel: Console: colour dummy device 80x25
Oct 19 04:54:21 akoya kernel: console [tty0] enabled
Oct 19 04:54:21 akoya kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3201.28 BogoMIPS (lpj=5333260)
Oct 19 04:54:21 akoya kernel: Security Framework initialized
Oct 19 04:54:21 akoya kernel: Mount-cache hash table entries: 512
Oct 19 04:54:21 akoya kernel: CPU: L1 I cache: 32K, L1 D cache: 24K
Oct 19 04:54:21 akoya kernel: CPU: L2 cache: 512K
Oct 19 04:54:21 akoya kernel: CPU: Physical Processor ID: 0
Oct 19 04:54:21 akoya kernel: CPU: Processor Core ID: 0
Oct 19 04:54:21 akoya kernel: mce: CPU supports 5 MCE banks
Oct 19 04:54:21 akoya kernel: CPU0: Thermal monitoring enabled (TM2)
Oct 19 04:54:21 akoya kernel: using mwait in idle threads.
Oct 19 04:54:21 akoya kernel: Performance Counters: Atom events, Intel PMU driver.
Oct 19 04:54:21 akoya kernel: ... version:                 3
Oct 19 04:54:21 akoya kernel: ... bit width:               40
Oct 19 04:54:21 akoya kernel: ... generic counters:        2
Oct 19 04:54:21 akoya kernel: ... value mask:              000000ffffffffff
Oct 19 04:54:21 akoya kernel: ... max period:              000000007fffffff
Oct 19 04:54:21 akoya kernel: ... fixed-purpose counters:  3
Oct 19 04:54:21 akoya kernel: ... counter mask:            0000000700000003
Oct 19 04:54:21 akoya kernel: Checking 'hlt' instruction... OK.
Oct 19 04:54:21 akoya kernel: ACPI: Core revision 20090521
Oct 19 04:54:21 akoya kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
Oct 19 04:54:21 akoya kernel: CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Oct 19 04:54:21 akoya kernel: Booting processor 1 APIC 0x1 ip 0x6000
Oct 19 04:54:21 akoya kernel: Initializing CPU#1
Oct 19 04:54:21 akoya kernel: Calibrating delay using timer specific routine.. 3201.05 BogoMIPS (lpj=5332881)
Oct 19 04:54:21 akoya kernel: CPU: L1 I cache: 32K, L1 D cache: 24K
Oct 19 04:54:21 akoya kernel: CPU: L2 cache: 512K
Oct 19 04:54:21 akoya kernel: CPU: Physical Processor ID: 0
Oct 19 04:54:21 akoya kernel: CPU: Processor Core ID: 0
Oct 19 04:54:21 akoya kernel: mce: CPU supports 5 MCE banks
Oct 19 04:54:21 akoya kernel: CPU1: Thermal monitoring enabled (TM2)
Oct 19 04:54:21 akoya kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 19 04:54:21 akoya kernel: CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Oct 19 04:54:21 akoya kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Oct 19 04:54:21 akoya kernel: Brought up 2 CPUs
Oct 19 04:54:21 akoya kernel: Total of 2 processors activated (6402.33 BogoMIPS).
Oct 19 04:54:21 akoya kernel: Booting paravirtualized kernel on bare hardware
Oct 19 04:54:21 akoya kernel: NET: Registered protocol family 16
Oct 19 04:54:21 akoya kernel: ACPI: bus type pci registered
Oct 19 04:54:21 akoya kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Oct 19 04:54:21 akoya kernel: PCI: Not using MMCONFIG.
Oct 19 04:54:21 akoya kernel: PCI: Using configuration type 1 for base access
Oct 19 04:54:21 akoya kernel: bio: create slab <bio-0> at 0
Oct 19 04:54:21 akoya kernel: ACPI: BIOS _OSI(Linux) query ignored
Oct 19 04:54:21 akoya kernel: ACPI: Interpreter enabled
Oct 19 04:54:21 akoya kernel: ACPI: (supports S0 S1 S3 S4 S5)
Oct 19 04:54:21 akoya kernel: ACPI: Using IOAPIC for interrupt routing
Oct 19 04:54:21 akoya kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Oct 19 04:54:21 akoya kernel: PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Oct 19 04:54:21 akoya kernel: PCI: Using MMCONFIG for extended config space
Oct 19 04:54:21 akoya kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Oct 19 04:54:21 akoya kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Oct 19 04:54:21 akoya kernel: ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Oct 19 04:54:21 akoya kernel: ACPI: EC: driver started in poll mode
Oct 19 04:54:21 akoya kernel: ACPI: No dock devices found.
Oct 19 04:54:21 akoya kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 19 04:54:21 akoya kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct 19 04:54:21 akoya kernel: pci 0000:00:1b.0: PME# disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.0: PME# disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.1: PME# disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Oct 19 04:54:21 akoya kernel: pci 0000:00:1d.7: PME# disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Oct 19 04:54:21 akoya kernel: pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Oct 19 04:54:21 akoya kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 004c (mask 0007)
Oct 19 04:54:21 akoya kernel: pci 0000:00:1f.2: PME# supported from D3hot
Oct 19 04:54:21 akoya kernel: pci 0000:00:1f.2: PME# disabled
Oct 19 04:54:21 akoya kernel: pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 19 04:54:21 akoya kernel: pci 0000:01:00.0: PME# disabled
Oct 19 04:54:21 akoya kernel: pci 0000:02:00.0: PME# supported from D0 D3hot
Oct 19 04:54:21 akoya kernel: pci 0000:02:00.0: PME# disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1e.0: transparent bridge
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 19 04:54:21 akoya kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 19 04:54:21 akoya kernel: PCI: Using ACPI for IRQ routing
Oct 19 04:54:21 akoya kernel: NetLabel: Initializing
Oct 19 04:54:21 akoya kernel: NetLabel:  domain hash size = 128
Oct 19 04:54:21 akoya kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Oct 19 04:54:21 akoya kernel: NetLabel:  unlabeled traffic allowed by default
Oct 19 04:54:21 akoya kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Oct 19 04:54:21 akoya kernel: pnp: PnP ACPI init
Oct 19 04:54:21 akoya kernel: ACPI: bus type pnp registered
Oct 19 04:54:21 akoya kernel: pnp: PnP ACPI: found 11 devices
Oct 19 04:54:21 akoya kernel: ACPI: ACPI bus type pnp unregistered
Oct 19 04:54:21 akoya kernel: system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Oct 19 04:54:21 akoya kernel: system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Oct 19 04:54:21 akoya kernel: system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Oct 19 04:54:21 akoya kernel: system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Oct 19 04:54:21 akoya kernel: system 00:05: ioport range 0x4d0-0x4d1 has been reserved
Oct 19 04:54:21 akoya kernel: system 00:09: ioport range 0x400-0x47f has been reserved
Oct 19 04:54:21 akoya kernel: system 00:09: ioport range 0x1180-0x119f has been reserved
Oct 19 04:54:21 akoya kernel: system 00:09: ioport range 0x500-0x53f has been reserved
Oct 19 04:54:21 akoya kernel: system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 19 04:54:21 akoya kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Oct 19 04:54:21 akoya kernel: system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved
Oct 19 04:54:21 akoya kernel: system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
Oct 19 04:54:21 akoya kernel: system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.0:   MEM window: 0xdfd00000-0xdfdfffff
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.0:   PREFETCH window: 0x000000ffd00000-0x000000ffdfffff
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.1:   IO window: disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.1:   MEM window: 0xdfc00000-0xdfcfffff
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.1:   PREFETCH window: disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
Oct 19 04:54:21 akoya kernel: pci 0000:00:1e.0:   IO window: disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1e.0:   MEM window: disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1e.0:   PREFETCH window: disabled
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 19 04:54:21 akoya kernel: pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 19 04:54:21 akoya kernel: NET: Registered protocol family 2
Oct 19 04:54:21 akoya kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 19 04:54:21 akoya kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 19 04:54:21 akoya kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 19 04:54:21 akoya kernel: TCP: Hash tables configured (established 131072 bind 65536)
Oct 19 04:54:21 akoya kernel: TCP reno registered
Oct 19 04:54:21 akoya kernel: NET: Registered protocol family 1
Oct 19 04:54:21 akoya kernel: Unpacking initramfs...
Oct 19 04:54:21 akoya kernel: Freeing initrd memory: 643k freed
Oct 19 04:54:21 akoya kernel: apm: BIOS not found.
Oct 19 04:54:21 akoya kernel: Scanning for low memory corruption every 60 seconds
Oct 19 04:54:21 akoya kernel: audit: initializing netlink socket (disabled)
Oct 19 04:54:21 akoya kernel: type=2000 audit(1255921940.526:1): initialized
Oct 19 04:54:21 akoya kernel: highmem bounce pool size: 64 pages
Oct 19 04:54:21 akoya kernel: VFS: Disk quotas dquot_6.5.2
Oct 19 04:54:21 akoya kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 19 04:54:21 akoya kernel: msgmni has been set to 1746
Oct 19 04:54:21 akoya kernel: alg: No test for stdrng (krng)
Oct 19 04:54:21 akoya kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Oct 19 04:54:21 akoya kernel: io scheduler noop registered
Oct 19 04:54:21 akoya kernel: io scheduler anticipatory registered
Oct 19 04:54:21 akoya kernel: io scheduler deadline registered
Oct 19 04:54:21 akoya kernel: io scheduler cfq registered (default)
Oct 19 04:54:21 akoya kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3750k, total 7872k
Oct 19 04:54:21 akoya kernel: vesafb: mode is 800x600x32, linelength=3200, pages=3
Oct 19 04:54:21 akoya kernel: vesafb: scrolling: redraw
Oct 19 04:54:21 akoya kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Oct 19 04:54:21 akoya kernel: Console: switching to colour frame buffer device 100x37
Oct 19 04:54:21 akoya kernel: fb0: VESA VGA frame buffer device
Oct 19 04:54:21 akoya kernel: isapnp: Scanning for PnP cards...
Oct 19 04:54:21 akoya kernel: isapnp: No Plug & Play device found
Oct 19 04:54:21 akoya kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Oct 19 04:54:21 akoya kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Oct 19 04:54:21 akoya kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 19 04:54:21 akoya kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 19 04:54:21 akoya kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 19 04:54:21 akoya kernel: mice: PS/2 mouse device common for all mice
Oct 19 04:54:21 akoya kernel: cpuidle: using governor ladder
Oct 19 04:54:21 akoya kernel: cpuidle: using governor menu
Oct 19 04:54:21 akoya kernel: TCP cubic registered
Oct 19 04:54:21 akoya kernel: NET: Registered protocol family 17
Oct 19 04:54:21 akoya kernel: Using IPI No-Shortcut mode
Oct 19 04:54:21 akoya kernel: registered taskstats version 1
Oct 19 04:54:21 akoya kernel: Initalizing network drop monitor service
Oct 19 04:54:21 akoya kernel: Freeing unused kernel memory: 416k freed
Oct 19 04:54:21 akoya kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Oct 19 04:54:21 akoya kernel: SCSI subsystem initialized
Oct 19 04:54:21 akoya kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 19 04:54:21 akoya kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
Oct 19 04:54:21 akoya kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
Oct 19 04:54:21 akoya kernel: scsi0 : ahci
Oct 19 04:54:21 akoya kernel: scsi1 : ahci
Oct 19 04:54:21 akoya kernel: scsi2 : ahci
Oct 19 04:54:21 akoya kernel: scsi3 : ahci
Oct 19 04:54:21 akoya kernel: ata1: SATA max UDMA/133 abar m1024@0xdff40000 port 0xdff40100 irq 26
Oct 19 04:54:21 akoya kernel: ata2: DUMMY
Oct 19 04:54:21 akoya kernel: ata3: SATA max UDMA/133 abar m1024@0xdff40000 port 0xdff40200 irq 26
Oct 19 04:54:21 akoya kernel: ata4: DUMMY
Oct 19 04:54:21 akoya kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 19 04:54:21 akoya kernel: ata3: SATA link down (SStatus 0 SControl 300)
Oct 19 04:54:21 akoya kernel: ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
Oct 19 04:54:21 akoya kernel: ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 19 04:54:21 akoya kernel: ata1.00: configured for UDMA/133
Oct 19 04:54:21 akoya kernel: scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
Oct 19 04:54:21 akoya kernel: sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Oct 19 04:54:21 akoya kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 19 04:54:21 akoya kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 19 04:54:21 akoya kernel: sda: sda1 sda2 sda3 sda4
Oct 19 04:54:21 akoya kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Oct 19 04:54:21 akoya kernel: EXT4-fs (sda3): barriers enabled
Oct 19 04:54:21 akoya kernel: EXT4-fs (sda3): delayed allocation enabled
Oct 19 04:54:21 akoya kernel: EXT4-fs: file extents enabled
Oct 19 04:54:21 akoya kernel: kjournald2 starting: pid 473, dev sda3:8, commit interval 5 seconds
Oct 19 04:54:21 akoya kernel: EXT4-fs: mballoc enabled
Oct 19 04:54:21 akoya kernel: EXT4-fs (sda3): mounted filesystem with ordered data mode
Oct 19 04:54:21 akoya kernel: rtc_cmos 00:04: RTC can wake from S4
Oct 19 04:54:21 akoya kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 19 04:54:21 akoya kernel: rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Oct 19 04:54:21 akoya kernel: udev: starting version 146
Oct 19 04:54:21 akoya kernel: input: PC Speaker as /devices/platform/pcspkr/input/input2
Oct 19 04:54:21 akoya kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 19 04:54:21 akoya kernel: intel_rng: FWH not detected
Oct 19 04:54:21 akoya kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 19 04:54:21 akoya kernel: r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 19 04:54:21 akoya kernel: eth0: RTL8102e at 0xf86b0000, 00:21:85:49:4c:92, XID 34a00000 IRQ 27
Oct 19 04:54:21 akoya kernel: usbcore: registered new interface driver usbfs
Oct 19 04:54:21 akoya kernel: usbcore: registered new interface driver hub
Oct 19 04:54:21 akoya kernel: usbcore: registered new device driver usb
Oct 19 04:54:21 akoya kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 19 04:54:21 akoya kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 19 04:54:21 akoya kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 19 04:54:21 akoya kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Oct 19 04:54:21 akoya kernel: ehci_hcd 0000:00:1d.7: debug port 1
Oct 19 04:54:21 akoya kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40400
Oct 19 04:54:21 akoya kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct 19 04:54:21 akoya kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 19 04:54:21 akoya kernel: hub 1-0:1.0: USB hub found
Oct 19 04:54:21 akoya kernel: hub 1-0:1.0: 8 ports detected
Oct 19 04:54:21 akoya kernel: rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
Oct 19 04:54:21 akoya kernel: rt2860 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 19 04:54:21 akoya kernel: 
Oct 19 04:54:21 akoya kernel: 
Oct 19 04:54:21 akoya kernel: === pAd = f8970000, size = 580808 ===
Oct 19 04:54:21 akoya kernel: 
Oct 19 04:54:21 akoya kernel: <-- RTMPAllocAdapterBlock, Status=0
Oct 19 04:54:21 akoya kernel: Linux agpgart interface v0.103
Oct 19 04:54:21 akoya kernel: uhci_hcd: USB Universal Host Controller Interface driver
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e0a0
Oct 19 04:54:21 akoya kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 19 04:54:21 akoya kernel: hub 2-0:1.0: USB hub found
Oct 19 04:54:21 akoya kernel: hub 2-0:1.0: 2 ports detected
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e080
Oct 19 04:54:21 akoya kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 19 04:54:21 akoya kernel: hub 3-0:1.0: USB hub found
Oct 19 04:54:21 akoya kernel: hub 3-0:1.0: 2 ports detected
Oct 19 04:54:21 akoya kernel: iTCO_vendor_support: vendor-support=0
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e060
Oct 19 04:54:21 akoya kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 19 04:54:21 akoya kernel: hub 4-0:1.0: USB hub found
Oct 19 04:54:21 akoya kernel: hub 4-0:1.0: 2 ports detected
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Oct 19 04:54:21 akoya kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e040
Oct 19 04:54:21 akoya kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 19 04:54:21 akoya kernel: hub 5-0:1.0: USB hub found
Oct 19 04:54:21 akoya kernel: hub 5-0:1.0: 2 ports detected
Oct 19 04:54:21 akoya kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Oct 19 04:54:21 akoya kernel: iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
Oct 19 04:54:21 akoya kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 19 04:54:21 akoya kernel: agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Oct 19 04:54:21 akoya kernel: agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Oct 19 04:54:21 akoya kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Oct 19 04:54:21 akoya kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Oct 19 04:54:21 akoya kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 19 04:54:21 akoya kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 19 04:54:21 akoya kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Oct 19 04:54:21 akoya kernel: usb 1-6: configuration #1 chosen from 1 choice
Oct 19 04:54:21 akoya kernel: Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
Oct 19 04:54:21 akoya kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
Oct 19 04:54:21 akoya kernel: ACPI: SSDT 3f5e8c90 00253 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Oct 19 04:54:21 akoya kernel: ACPI: SSDT 3f5e7690 00653 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Oct 19 04:54:21 akoya kernel: ACPI: AC Adapter [ADP1] (on-line)
Oct 19 04:54:21 akoya kernel: hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
Oct 19 04:54:21 akoya kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
Oct 19 04:54:21 akoya kernel: Marking TSC unstable due to TSC halts in idle
Oct 19 04:54:21 akoya kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Oct 19 04:54:21 akoya kernel: processor LNXCPU:00: registered as cooling_device0
Oct 19 04:54:21 akoya kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 19 04:54:21 akoya kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Oct 19 04:54:21 akoya kernel: ACPI: Power Button [PWRF]
Oct 19 04:54:21 akoya kernel: ACPI: SSDT 3f5e8f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Oct 19 04:54:21 akoya kernel: ACPI: SSDT 3f611b10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Oct 19 04:54:21 akoya kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Oct 19 04:54:21 akoya kernel: processor LNXCPU:01: registered as cooling_device1
Oct 19 04:54:21 akoya kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Oct 19 04:54:21 akoya kernel: Initializing USB Mass Storage driver...
Oct 19 04:54:21 akoya kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Oct 19 04:54:21 akoya kernel: usbcore: registered new interface driver usb-storage
Oct 19 04:54:21 akoya kernel: USB Mass Storage support registered.
Oct 19 04:54:21 akoya kernel: thermal LNXTHERM:01: registered as thermal_zone0
Oct 19 04:54:21 akoya kernel: ACPI: Thermal Zone [THRM] (26 C)
Oct 19 04:54:21 akoya kernel: Clocksource tsc unstable (delta = -88031415 ns)
Oct 19 04:54:21 akoya kernel: ACPI: Battery Slot [BAT1] (battery present)
Oct 19 04:54:21 akoya kernel: ACPI: WMI: Mapper loaded
Oct 19 04:54:21 akoya kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C09:00/PNP0C0D:00/input/input6
Oct 19 04:54:21 akoya kernel: Linux video capture interface: v2.00
Oct 19 04:54:21 akoya kernel: uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0141)
Oct 19 04:54:21 akoya kernel: input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Oct 19 04:54:21 akoya kernel: usbcore: registered new interface driver uvcvideo
Oct 19 04:54:21 akoya kernel: USB Video Class driver (v0.1.0)
Oct 19 04:54:21 akoya kernel: ACPI: Lid Switch [LID0]
Oct 19 04:54:21 akoya kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
Oct 19 04:54:21 akoya kernel: ACPI: Power Button [PWRB]
Oct 19 04:54:21 akoya kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
Oct 19 04:54:21 akoya kernel: ACPI: Sleep Button [SLPB]
Oct 19 04:54:21 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
Oct 19 04:54:21 akoya kernel: atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Oct 19 04:54:21 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
Oct 19 04:54:21 akoya kernel: atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Oct 19 04:54:21 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:21 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:21 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:21 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:21 akoya kernel: acpi device:1c: registered as cooling_device2
Oct 19 04:54:21 akoya kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/input/input10
Oct 19 04:54:21 akoya kernel: ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
Oct 19 04:54:21 akoya kernel: EXT4-fs (sda3): internal journal on sda3:8
Oct 19 04:54:21 akoya kernel: Adding 481940k swap on /dev/sda4.  Priority:-1 extents:1 across:481940k 
Oct 19 04:54:21 akoya kernel: scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
Oct 19 04:54:21 akoya kernel: sd 4:0:0:0: Attached scsi generic sg1 type 0
Oct 19 04:54:21 akoya kernel: sd 4:0:0:0: [sdb] Attached SCSI removable disk
Oct 19 05:12:27 akoya load-modules.sh: 'acpi:LNXSYSTM:' is not a valid module or alias name
Oct 19 05:12:27 akoya load-modules.sh: 'pci:v00008086d00002448sv00000000sd00000000bc06sc04i01' is not a valid module or alias name
Oct 19 05:12:27 akoya load-modules.sh: 'dmi:bvnAmericanMegatrendsInc.:bvr4.6.3:bd06/26/2008:svnMEDION:pnE1210:pvrVer.001:rvnMEDION:rnE1210:rvrVer.001:cvnMEDION:ct3:cvrVer.001:' is not a valid module or alias name
Oct 19 05:12:27 akoya load-modules.sh: 'pci:v00008086d000027AEsv00001462sd00000110bc03sc00i00' is not a valid module or alias name
Oct 19 05:12:27 akoya load-modules.sh: 'pci:v00008086d000027A6sv00001462sd00000110bc03sc80i00' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0C04:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0800:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0F03:PNP0F13:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0100:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0303:PNP030B:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0000:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0103:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'acpi:PNP0200:' is not a valid module or alias name
Oct 19 05:12:28 akoya load-modules.sh: 'usb:v5986p0141d0304dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Oct 19 04:54:20 akoya init: Entering runlevel: 3
Oct 19 04:54:25 akoya NetworkManager: <info>  starting...
Oct 19 04:54:25 akoya NetworkManager: <WARN>  nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():
Oct 19 04:54:25 akoya Sucess: 
Oct 19 04:54:25 akoya NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Oct 19 04:54:25 akoya NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_21_85_49_4c_92
Oct 19 04:54:25 akoya NetworkManager: <info>  (ra0): driver does not support SSID scans (scan_capa 0x00).
Oct 19 04:54:25 akoya NetworkManager: <info>  (ra0): new 802.11 WiFi device (driver: 'rt2860')
Oct 19 04:54:25 akoya NetworkManager: <info>  (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781
Oct 19 04:54:25 akoya NetworkManager: <info>  Trying to start the supplicant...
Oct 19 04:54:25 akoya NetworkManager: <info>  Trying to start the system settings daemon...
Oct 19 04:54:25 akoya NetworkManager: <info>  (ra0): supplicant manager state:  down -> idle
Oct 19 04:54:26 akoya nm-system-settings: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Oct 19 04:54:28 akoya kernel: [drm] Initialized drm 1.1.0 20060810
Oct 19 04:54:28 akoya kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 19 04:54:28 akoya kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Oct 19 04:54:28 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:28 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:28 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:28 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:29 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
Oct 19 04:54:29 akoya kernel: atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Oct 19 04:54:29 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
Oct 19 04:54:29 akoya kernel: atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Oct 19 04:54:29 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:29 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:29 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:29 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:30 akoya kernel: r8169: eth0: link down
Oct 19 04:54:30 akoya NetworkManager: <info>  (eth0): device state change: 1 -> 2
Oct 19 04:54:30 akoya NetworkManager: <info>  (eth0): bringing up device.
Oct 19 04:54:30 akoya NetworkManager: <info>  (eth0): preparing device.
Oct 19 04:54:30 akoya NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 19 04:54:30 akoya NetworkManager: <info>  (ra0): device state change: 1 -> 2
Oct 19 04:54:30 akoya NetworkManager: <info>  (ra0): bringing up device.
Oct 19 04:54:30 akoya kernel: RX DESC f6889000  size = 2048
Oct 19 04:54:30 akoya kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Oct 19 04:54:30 akoya kernel: --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
Oct 19 04:54:30 akoya kernel: 1. Phy Mode = 0
Oct 19 04:54:30 akoya kernel: 2. Phy Mode = 0
Oct 19 04:54:30 akoya kernel: RTMPSetPhyMode: channel is out of range, use first channel=1 
Oct 19 04:54:30 akoya kernel: 3. Phy Mode = 0
Oct 19 04:54:30 akoya kernel: MCS Set = 00 00 00 00 00
Oct 19 04:54:30 akoya kernel: <==== RTMPInitialize, Status=0
Oct 19 04:54:30 akoya kernel: 0x1300 = 00073200
Oct 19 04:54:30 akoya NetworkManager: <info>  (ra0): preparing device.
Oct 19 04:54:30 akoya NetworkManager: <info>  (ra0): deactivating device (reason: 2).
Oct 19 04:54:30 akoya NetworkManager: <info>  (ra0): device state change: 2 -> 3
Oct 19 04:54:30 akoya NetworkManager: <info>  (ra0): supplicant interface state:  starting -> ready
Oct 19 04:54:30 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:30 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:30 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:30 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:30 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
Oct 19 04:54:30 akoya kernel: atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Oct 19 04:54:30 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
Oct 19 04:54:30 akoya kernel: atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Oct 19 04:54:31 akoya nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_21_85_49_4c_92
Oct 19 04:54:32 akoya kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:32 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:32 akoya kernel: atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
Oct 19 04:54:32 akoya kernel: atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
Oct 19 04:54:35 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309
Oct 19 04:54:36 akoya kernel: ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0) starting connection 'Auto ups'
Oct 19 04:54:45 akoya NetworkManager: <info>  (ra0): device state change: 3 -> 4
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare) started...
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device Configure) scheduled...
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare) complete.
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device Configure) starting...
Oct 19 04:54:45 akoya NetworkManager: <info>  (ra0): device state change: 4 -> 5
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0/wireless): connection 'Auto ups' requires no security.  No secrets needed.
Oct 19 04:54:45 akoya NetworkManager: <info>  Config: added 'ssid' value 'ups'
Oct 19 04:54:45 akoya NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Oct 19 04:54:45 akoya NetworkManager: <info>  Config: added 'key_mgmt' value 'NONE'
Oct 19 04:54:45 akoya NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device Configure) complete.
Oct 19 04:54:45 akoya NetworkManager: <info>  Config: set interface ap_scan to 1
Oct 19 04:54:45 akoya NetworkManager: <info>  (ra0): supplicant connection state:  inactive -> scanning
Oct 19 04:54:55 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309
Oct 19 04:54:55 akoya kernel: ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
Oct 19 04:54:55 akoya NetworkManager: <info>  (ra0): supplicant connection state:  scanning -> associating
Oct 19 04:54:55 akoya NetworkManager: <info>  (ra0): supplicant connection state:  associating -> associated
Oct 19 04:54:55 akoya NetworkManager: <info>  (ra0): supplicant connection state:  associated -> completed
Oct 19 04:54:55 akoya NetworkManager: <info>  Activation (ra0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'ups'.
Oct 19 04:54:55 akoya NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 19 04:54:55 akoya NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure Start) started...
Oct 19 04:54:55 akoya NetworkManager: <info>  (ra0): device state change: 5 -> 7
Oct 19 04:54:55 akoya NetworkManager: <info>  Activation (ra0) Beginning DHCP transaction.
Oct 19 04:54:55 akoya NetworkManager: <info>  dhcpcd started with pid 3013
Oct 19 04:54:55 akoya NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure Start) complete.
Oct 19 04:54:55 akoya dhcpcd: version 5.1.1 starting
Oct 19 04:54:55 akoya NetworkManager: <info>  DHCP: device ra0 state changed (null) -> preinit
Oct 19 04:54:55 akoya dhcpcd: ra0: rebinding lease of 192.168.1.3
Oct 19 04:55:05 akoya dhcpcd: ra0: broadcasting for a lease
Oct 19 04:55:06 akoya dhcpcd: ra0: offered 130.120.242.179 from 130.120.240.1
Oct 19 04:55:06 akoya dhcpcd: ra0: acknowledged 130.120.242.179 from 130.120.240.1
Oct 19 04:55:06 akoya dhcpcd: ra0: checking for 130.120.242.179
Oct 19 04:55:11 akoya dhcpcd: ra0: leased 130.120.242.179 for 7200 seconds
Oct 19 04:55:11 akoya NetworkManager: <info>  DHCP: device ra0 state changed preinit -> bound
Oct 19 04:55:11 akoya NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP Configure Get) scheduled...
Oct 19 04:55:11 akoya NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP Configure Get) started...
Oct 19 04:55:11 akoya NetworkManager: <info>    address 130.120.242.179
Oct 19 04:55:11 akoya NetworkManager: <info>    prefix 22 (255.255.252.0)
Oct 19 04:55:11 akoya NetworkManager: <info>    gateway 130.120.240.1
Oct 19 04:55:11 akoya NetworkManager: <info>    nameserver '130.120.240.1'
Oct 19 04:55:11 akoya NetworkManager: <info>    domain name 'ups-tlse.fr'
Oct 19 04:55:11 akoya NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP Configure Commit) scheduled...
Oct 19 04:55:11 akoya NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP Configure Get) complete.
Oct 19 04:55:11 akoya NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP Configure Commit) started...
Oct 19 04:55:12 akoya NetworkManager: <info>  (ra0): device state change: 7 -> 8
Oct 19 04:55:12 akoya NetworkManager: <info>  Policy set 'Auto ups' (ra0) as default for routing and DNS.
Oct 19 04:55:12 akoya NetworkManager: <info>  Activation (ra0) successful, device activated.
Oct 19 04:55:12 akoya NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP Configure Commit) complete.
Oct 19 04:55:25 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309
Oct 19 04:55:44 akoya kernel: NET: Registered protocol family 10
Oct 19 04:55:44 akoya kernel: lo: Disabled Privacy Extensions
Oct 19 04:55:44 akoya kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 19 04:56:05 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309
Oct 19 04:57:05 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309
Oct 19 04:58:25 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309
Oct 19 04:59:01 akoya kernel: ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
Oct 19 04:59:01 akoya NetworkManager: <info>  (ra0): supplicant connection state:  completed -> disconnected
Oct 19 04:59:01 akoya NetworkManager: <info>  (ra0): supplicant connection state:  disconnected -> scanning
Oct 19 04:59:03 akoya NetworkManager: <info>  (ra0): supplicant connection state:  scanning -> associated
Oct 19 04:59:03 akoya NetworkManager: <info>  (ra0): supplicant connection state:  associated -> completed
Oct 19 04:59:06 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309
Oct 19 05:00:05 akoya kernel: ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 309

[tuxce]

qu'est ce que tu as de spécial dans ton ordi, le noyau est recompilé, t'as modifié les initscripts? installé une version spéciale depuis aur ?

la multitude de

Code : Tout sélectionner

load-modules.sh: '*' is not a valid module or alias name

n'est pas normal.
t'as eu une erreur lors de l'install du noyau ? tu en as gardé un ancien ?

[m0g]

Ca fait pratiquement un an que j'utilise ce système. Mais je n'ai pas le souvenir d'avoir modifié le noyau, ou les initscripts.
Et de plus, je suis bien sur le noyau 2.6.31 et je précise que ce pc fonctionnait très bien avant la mise à jours du noyau.
Il va peut-etre falloir envisagé une réinstallation, mais ca serait embêtant.