Mon problème : K3B refuse de graver mes CDs
je n'ai pas encore testé d'autres logiciels de gravure, mais ce serait un bon test, je vous tiens au courant.
J'utilise Arch 64bits
je suis bien dans le groupe optical.
Il n'y a aucun souci avec mon lecteur pour lire les cds et la gravure de Dvds ne pose aucun souci.
une bonne moitié d'un spindle 100cds de bonne marque ont été testé, je ne pense pas aux cds defectueux.
J'obtiens une erreur comme ça :
Si ça peut aider, j'ai le fichier de log aussi :
Code : Tout sélectionner
[System] K3b Version: 1.69.0
[System] KDE Version: 4.3.4 (KDE 4.3.4)
[System] QT Version: 4.5.3
[System] Kernel: 2.6.32-ARCH
[Devices] PIONEER DVD-RW DVR-108 1.14 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
[Devices] HL-DT-ST DVD-ROM GDR-H30N 1.00 (/dev/sr0, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]
[Used versions] mkisofs: 1.1.10
[mkisofs calculate size command:] /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Data -volset -appid K3B THE CD KREATOR (C) 1998-2009 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-belgarion/k3bju3395.tmp -rational-rock -hide-list /tmp/kde-belgarion/k3bEt3395.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-belgarion/k3boB3395.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-belgarion/k3bjk3395.tmp
[mkisofs] 323884
[K3b::IsoImager] mkisofs print size result: 323884 (663314432 bytes)
[Used versions] cdrecord: 1.1.10
[cdrecord command:] /usr/bin/wodim -v gracetime=2 dev=/dev/sr1 speed=32 -tao driveropts=burnfree -multi -xa -tsize=323884s -
[mkisofs command:] /usr/bin/genisoimage -gui -graft-points -volid Data -volset -appid K3B THE CD KREATOR (C) 1998-2009 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-belgarion/k3bNy3395.tmp -rational-rock -hide-list /tmp/kde-belgarion/k3bhK3395.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-belgarion/k3bpN3395.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-belgarion/k3bSs3395.tmp
[cdrecord] /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
[cdrecord] scsidev: '/dev/sr1'
[cdrecord] devname: '/dev/sr1'
[cdrecord] scsibus: -2 target: -2 lun: -2
[cdrecord] Linux sg driver version: 3.5.27
[cdrecord] Wodim version: 1.1.10
[cdrecord] SCSI buffer size: 64512
[mkisofs] I: -input-charset not specified, using utf-8 (detected in locale settings)
[cdrecord] Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
[cdrecord] communication breaks or freezes immediately after that.
[cdrecord] TOC Type: 3 = CD-ROM XA mode 2
[cdrecord] Driveropts: 'burnfree'
[cdrecord] Device type : Removable CD-ROM
[cdrecord] Version : 5
[cdrecord] Response Format: 2
[cdrecord] Capabilities :
[cdrecord] Vendor_info : 'PIONEER '
[cdrecord] Identification : 'DVD-RW DVR-108 '
[cdrecord] Revision : '1.14'
[cdrecord] Device seems to be: Generic mmc2 DVD-R/DVD-RW.
[cdrecord] Current: 0x0009 (CD-R)
[cdrecord] Profile: 0x002B (DVD+R/DL)
[cdrecord] Profile: 0x001B (DVD+R)
[cdrecord] Profile: 0x001A (DVD+RW)
[cdrecord] Profile: 0x0014 (DVD-RW sequential recording)
[cdrecord] Profile: 0x0013 (DVD-RW restricted overwrite)
[cdrecord] Profile: 0x0011 (DVD-R sequential recording)
[cdrecord] Profile: 0x0010 (DVD-ROM)
[cdrecord] Profile: 0x000A (CD-RW)
[cdrecord] Profile: 0x0009 (CD-R) (current)
[cdrecord] Profile: 0x0008 (CD-ROM)
[cdrecord] Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
[cdrecord] Driver flags : MMC-3 SWABAUDIO BURNFREE
[cdrecord] Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
[cdrecord] Drive buf size : 1267712 = 1238 KB
[cdrecord] FIFO size : 4194304 = 4096 KB
[mkisofs] 0.16% done, estimate finish Thu Jan 14 17:39:25 2010
[mkisofs] 0.31% done, estimate finish Thu Jan 14 17:23:48 2010
[mkisofs] 0.46% done, estimate finish Thu Jan 14 17:18:30 2010
[mkisofs] 0.62% done, estimate finish Thu Jan 14 17:15:46 2010
[cdrecord] Speed set to 5644 KB/s
[cdrecord] Track 01: data 632 MB
[cdrecord] Total size: 726 MB (71:58.48) = 323886 sectors
[cdrecord] Lout start: 726 MB (72:00/36) = 323886 sectors
[cdrecord] Current Secsize: 2048
[cdrecord] ATIP info from disk:
[cdrecord] Indicated writing power: 6
[cdrecord] Is not unrestricted
[cdrecord] Is not erasable
[cdrecord] Disk sub type: Medium Type C, low Beta category (C-) (6)
[cdrecord] ATIP start of lead in: -11231 (97:32/19)
[cdrecord] ATIP start of lead out: 359846 (79:59/71)
[cdrecord] Disk type: Short strategy type (Phthalocyanine or similar)
[cdrecord] Manuf. index: 27
[cdrecord] Manufacturer: Prodisc Technology Inc.
[cdrecord] Blocks total: 359846 Blocks current: 359846 Blocks remaining: 35960
[cdrecord] Starting to write CD/DVD at speed 32.0 in real TAO mode for multi session.
[cdrecord] Last chance to quit, starting real write in 2 seconds.
[cdrecord] 1 seconds.
[cdrecord] 0 seconds. Operation starts.
[cdrecord] Waiting for reader process to fill input buffer ... input buffer ready.
[cdrecord] Performing OPC...
[cdrecord] Errno: 5 (Input/output error), send opc scsi sendcmd: no error
[cdrecord] CDB: 54 01 00 00 00 00 00 00 00 00
[cdrecord] status: 0x2 (CHECK CONDITION)
[cdrecord] Sense Bytes: 70 00 03 00 00 00 00 0E 00 00 00 00 73 03 00 00
[cdrecord] Sense Key: 0x3 Medium Error, Segment 0
[cdrecord] Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
[cdrecord] Sense flags: Blk 0 (not valid)
[cdrecord] cmd finished after 14.781s timeout 60s
[cdrecord] /usr/bin/wodim: OPC failed.
[cdrecord] Writing time: 14.887s
[cdrecord] /usr/bin/wodim: fifo had 64 puts and 0 gets.
[cdrecord] /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
Voilà, j'avoue sécher un peu, j'ai bien vu un certain nombre de solutions,
notamment ici : https://bugs.launchpad.net/ubuntu/+sour ... bug/149076
Mais ça marche pas des masses
Merci !
PS : j'essaierai de passer me présenter, c'est pas bien de poster direct comme un malpoli
