Comme yaourt me faisait des histoires avec la mise à jour d'icecat, je me suis décidé à le désinstaller avec yaourt -R --nosave icecat xulrunner, puis de réinstaller les deux.
Or c'est devenu assez impossible et spécial au terminal (désolé c'est long mais j'ai préféré tout mettre):
Code : Tout sélectionner
yaourt -S icecat
/usr/bin/pacman : option invalide -- '?'
[daniel@dakat2 ~]$ yaourt --S icecat
/usr/bin/pacman : option non reconnue « --S icecat »
[daniel@dakat2 ~]$ yaourt -S icecat
/usr/bin/pacman : option invalide -- '?'
[daniel@dakat2 ~]$ yaourt -S icecat
==> Téléchargement du PKGBUILD de icecat depuis AUR...
bsdtar: Removing leading '/' from member names
x xulrunner-copy-stub.patch
x PKGBUILD
x mozilla-firefox-1.0-lang.patch
x icecat-safe.desktop
x icecat.desktop
x mozconfig
x icecat.install
Comment by: tjwoosta on Thu, 24 Jun 2010 08:00:07 +0000
Am I really though?
I have gtk-qt-engine running just fine without libbonoboui or kdelibs (which both pull in a ton of unnescessary depends), and I have icecat running just fine without libgnomeui. Both of which were built without those packages and without the need for --disable flags or otherwise pkgbuild modification except removing/replacing deps. If this is possible, why should they be required?
How about this from the gtk-qt-engine readme?
Prerequisites:
CMake 2.4
Qt 4.3 developement package
GTK developement package
I dont see any libgnomeui or kdelibs, no affiliation with any DE at all.
or how about this from the icecat readme?
The default configuration of IceCat uses the following libraries:
libpango libpangoxft libpangoft2 libfreetype libxft libgtk2 libx11
wheres libgnomeui? The configure script checks for it sure, but it doesnt require it, not for building or otherwise. Only gnome users might want this, but even then its not required. Its like an optbuilddep because its optional, but if you choose to use it it should be installed before you compile like a builddep. This could easily be covered in the optdep details (libgnomeui: for gnome integration, requires rebuilding the package)
Comment by: wonder on Thu, 24 Jun 2010 10:19:41 +0000
i was talking only about icecat and firefox. if you use firefox, pacman will never fetch libgnomeui and after compiling icecat you do pacman -Rs $(pacman -Qdtq) will clean that crap too.
Comment by: figue on Sun, 27 Jun 2010 08:20:04 +0000
i18n package was splitted. Please, check your language package: icecat-${langpack}. Much better, I think.
Comment by: Ravenman on Wed, 30 Jun 2010 19:07:41 +0000
The package xulrunner has been updated from 1.9.2.4 to 1.9.2.6 version and I can't install IceCat by the dependencies. What can I do?
Comment by: figue on Wed, 30 Jun 2010 22:29:17 +0000
@Ravenman, IceCat needs exactly its xulrunner version, but you can use IceCat with lastest xulrunner, though. It isn't recommended, just it works. I've been playing a bit and IceCat seems to be stable. Quick steps:
- pacman -Sd xulrunner
- Download lastest tarball and untar it.
- makepkg -d
- pacman -U icecat-3.6.4-1-${arch}.pkg.tar.xz
or just you can wait until Giuseppe release lastest version ;)
Comment by: cb474 on Thu, 01 Jul 2010 00:46:14 +0000
@Ravenman: Or you could download the older version of xulrunner from Arch Rollback Machine: http://arm.kh.nu/search/. Use pacman -U to install it. Then edit the IgnorePkg line in pacman.conf and add xulrunner, so it doesn't get upgraded, with system upgrades. That's what I do when I'm waiting for Icecat to get upgraded to the latest version. Usually Icecat upgrades right away or withing a couple days, but this time the GNU OS people seem to be taking a longer time.
First Submitted: Sun, 09 Dec 2007 10:12:05 +0000
icecat 3.6.4-1 : GNU version of the Firefox browser
( Paquet non supporté : peut être dangereux ! )
==> Éditer PKGBUILD ? [O/n] ("A" pour annuler)
==> ------------------------------------------
==>
==> o
Veuillez ajouter \$EDITOR à vos variables d'environnement
par exemple :
export EDITOR="vim" (dans ~/.bashrc)
(remplacez vim par votre éditeur favori)
==> Éditer PKGBUILD avec :medit
==> Dépendances de icecat :
- desktop-file-utils (déjà installé)
- mime-types (déjà installé)
- shared-mime-info (déjà installé)
- zip (déjà installé)
- libgnomeui>=2.22.1 (déjà installé)
- python (déjà installé)
- autoconf2.13 (déjà installé)
- xulrunner=1.9.2.4 (compilation depuis AUR)
- wireless_tools (paquet trouvé)
==> Éditer PKGBUILD ? [O/n] ("A" pour annuler)
==> ------------------------------------------
==>
==> r
==> Dépendances de icecat :
- desktop-file-utils (déjà installé)
- mime-types (déjà installé)
- shared-mime-info (déjà installé)
- zip (déjà installé)
- libgnomeui>=2.22.1 (déjà installé)
- python (déjà installé)
- autoconf2.13 (déjà installé)
- xulrunner=1.9.2.4 (compilation depuis AUR)
- wireless_tools (paquet trouvé)
==> Éditer PKGBUILD ? [O/n] ("A" pour annuler)
==> ------------------------------------------
==>
==> n
==> Dépendances de icecat :
- desktop-file-utils (déjà installé)
- mime-types (déjà installé)
- shared-mime-info (déjà installé)
- zip (déjà installé)
- libgnomeui>=2.22.1 (déjà installé)
- python (déjà installé)
- autoconf2.13 (déjà installé)
- xulrunner=1.9.2.4 (compilation depuis AUR)
- wireless_tools (paquet trouvé)
==> Éditer icecat.install ? [O/n] ("A" pour annuler)
==> ------------------------------------------------
n
==> Lancer la compilation de icecat ? [O/n]
==> ---------------------------------------
==>
==> Construction et installation du paquet
==> Installation/compilation des dépendances manquantes pour icecat :
Mot de passe :
Avertissement: xulrunner-1.9.2.6-1 est à jour -- réinstalle
Résolution des dépendances...
Recherche des conflits possibles entre paquets...
Cibles (2): wireless_tools-29-3 xulrunner-1.9.2.6-1
Taille totale des paquets (téléchargement): 0,00 Mo
Taille totale des paquets (installation): 64,05 Mo
Procéder à l'installation ? [O/n] o
Analyse de l'intégrité des paquets...
(2/2) Analyse des conflits entre fichiers [###################] 100%
(1/2) Installation de wireless_tools [###################] 100%
(2/2) Mise à jour de xulrunner [###################] 100%
==> WARNING: Des dépendances ont été installées avant l'échec
Vérification des dépendances...
Suppression (1): wireless_tools-29-3
Taille totale des paquets (suppression): 0,23 Mo
Voulez-vous désinstaller ces paquets ? [O/n]
(1/1) Désinstallation de wireless_tools [###################] 100%
==> Relancer la compilation de icecat ? [o/N]
==> -----------------------------------------
==>
==> Éditer PKGBUILD ? [O/n] ("A" pour annuler)
==> ------------------------------------------
==> n
==> Dépendances de icecat :
- desktop-file-utils (déjà installé)
- mime-types (déjà installé)
- shared-mime-info (déjà installé)
- zip (déjà installé)
- libgnomeui>=2.22.1 (déjà installé)
- python (déjà installé)
- autoconf2.13 (déjà installé)
- xulrunner=1.9.2.4 (compilation depuis AUR)
- wireless_tools (paquet trouvé)
==> Éditer icecat.install ? [O/n] ("A" pour annuler)
==> ------------------------------------------------
==>
==> n
==> Lancer la compilation de icecat ? [O/n]
==> ---------------------------------------
==>
==> Construction et installation du paquet
==> Installation/compilation des dépendances manquantes pour icecat :
Avertissement: xulrunner-1.9.2.6-1 est à jour -- réinstalle
Résolution des dépendances...
Recherche des conflits possibles entre paquets...
Cibles (2): wireless_tools-29-3 xulrunner-1.9.2.6-1
Taille totale des paquets (téléchargement): 0,00 Mo
Taille totale des paquets (installation): 64,05 Mo
Procéder à l'installation ? [O/n] o
Analyse de l'intégrité des paquets...
(2/2) Analyse des conflits entre fichiers [###################] 100%
(1/2) Installation de wireless_tools [###################] 100%
(2/2) Mise à jour de xulrunner [###################] 100%
==> WARNING: Des dépendances ont été installées avant l'échec
Vérification des dépendances...
Suppression (1): wireless_tools-29-3
Taille totale des paquets (suppression): 0,23 Mo
Voulez-vous désinstaller ces paquets ? [O/n]
J'ai essayé:
Code : Tout sélectionner
pacman -Sd xulrunner
- Download lastest tarball and untar it.
- makepkg -d
- pacman -U icecat-3.6.4-1-${arch}.pkg.tar.xzCode : Tout sélectionner
[daniel@dakat2 icecat]$ makepkg -d
==> Création du paquet icecat 3.6.4-1 (dim. juil. 4 16:07:54 CEST 2010)
==> ATTENTION: Passe la vérification des dépendances.
==> Récupération des sources...
-> Téléchargement de icecat-3.6.4.tar.xz...
--2010-07-04 16:07:54-- http://ftp.gnu.org/gnu/gnuzilla/3.6.4/icecat-3.6.4.tar.xz
Résolution de ftp.gnu.org... 140.186.70.20
Connexion vers ftp.gnu.org|140.186.70.20|:80...connecté.
requête HTTP transmise, en attente de la réponse...200 OK
Longueur: 38615644 (37M) [application/x-tar]
Sauvegarde en : «icecat-3.6.4.tar.xz.part»
100%[======================================>] 38 615 644 795K/s ds 49s
2010-07-04 16:08:43 (768 KB/s) - «icecat-3.6.4.tar.xz.part» sauvegardé [38615644/38615644]
-> mozconfig trouvé
-> icecat.desktop trouvé
-> icecat-safe.desktop trouvé
-> mozilla-firefox-1.0-lang.patch trouvé
-> xulrunner-copy-stub.patch trouvé
==> Validation des fichiers sources avec md5sums...
icecat-3.6.4.tar.xz ... Réussite
mozconfig ... Réussite
icecat.desktop ... Réussite
icecat-safe.desktop ... Réussite
mozilla-firefox-1.0-lang.patch ... Réussite
xulrunner-copy-stub.patch ... Réussite
==> Extraction des sources...
-> Extraction de icecat-3.6.4.tar.xz avec bsdtar
==> Entre dans l'environnement fakeroot...
==> Lancement de build()...
patching file browser/app/profile/firefox.js
Hunk #1 succeeded at 492 with fuzz 2 (offset 239 lines).
patching file browser/app/Makefile.in
Hunk #1 succeeded at 411 (offset -3 lines).
Adding client.mk options from /home/daniel/Desktop/icecat/src/icecat-3.6.4/.mozconfig:
BUILD_OFFICIAL=1
MOZILLA_OFFICIAL=1
USE_SHORT_LIBNAME=1
make[1]: entrant dans le répertoire « /home/daniel/Desktop/icecat/src/icecat-3.6.4 »
cd /home/daniel/Desktop/icecat/src/icecat-3.6.4
./configure
Adding configure options from ./.mozconfig:
--enable-application=browser
--prefix=/usr
--libdir=/usr/lib
--with-system-nspr
--with-system-nss
--with-system-jpeg
--with-system-zlib
--with-system-png
--with-pthreads
--disable-tests
--disable-debug
--enable-optimize
--disable-installer
--enable-xinerama
--enable-default-toolkit=cairo-gtk2
--disable-xprint
--enable-strip
--enable-pango
--enable-system-cairo
--enable-svg
--enable-canvas
--enable-startup-notification
--enable-libxul
--disable-crashreporter
--with-libxul-sdk=/usr/lib/xulrunner-devel-1.9.2
--enable-safe-browsing
--with-branding=browser/branding/unofficial
creating cache ./config.cache
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking build system type... i686-pc-linux-gnu
checking for gawk... gawk
checking for perl5... no
checking for perl... /usr/bin/perl
checking for gcc... gcc
checking whether the C compiler (gcc -Wl,-rpath,/usr/lib/icecat-3.6.4/) works... yes
checking whether the C compiler (gcc -Wl,-rpath,/usr/lib/icecat-3.6.4/) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for c++... c++
checking whether the C++ compiler (c++ -Wl,-rpath,/usr/lib/icecat-3.6.4/) works... yes
checking whether the C++ compiler (c++ -Wl,-rpath,/usr/lib/icecat-3.6.4/) is a cross-compiler... no
checking whether we are using GNU C++... yes
checking whether c++ accepts -g... yes
checking for ranlib... ranlib
checking for as... /usr/bin/as
checking for ar... ar
checking for ld... ld
checking for strip... strip
checking for windres... no
checking whether gcc and cc understand -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking how to run the C++ preprocessor... c++ -E
checking for a BSD compatible install... /bin/install -c
checking whether ln -s works... yes
checking for minimum required perl version >= 5.006... 5.010001
checking for full perl installation... yes
checking for python2.5... no
checking for python2.4... no
checking for python... /usr/bin/python
checking for doxygen... :
checking for whoami... /usr/bin/whoami
checking for autoconf... /usr/bin/autoconf
checking for unzip... /usr/bin/unzip
checking for zip... /usr/bin/zip
checking for makedepend... no
checking for xargs... /usr/bin/xargs
checking for gmake... no
checking for make... /usr/bin/make
checking for X... libraries , headers
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking whether the compiler supports -Wno-invalid-offsetof... yes
checking whether ld has archive extraction flags... yes
checking that static assertion macros used in autoconf tests work... yes
checking for 64-bit OS... no
checking for minimum required Python version >= 2.4... yes
checking for ANSI C header files... yes
checking for working const... yes
checking for mode_t... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for st_blksize in struct stat... yes
checking for siginfo_t... yes
checking for int16_t... yes
checking for int32_t... yes
checking for int64_t... yes
checking for int64... no
checking for uint... yes
checking for uint_t... no
checking for uint16_t... no
checking for uname.domainname... yes
checking for uname.__domainname... no
checking for usable char16_t (2 bytes, unsigned)... no
checking for usable wchar_t (2 bytes, unsigned)... no
checking for compiler -fshort-wchar option... yes
checking for visibility(hidden) attribute... yes
checking for visibility(default) attribute... yes
checking for visibility pragma support... yes
checking For gcc visibility bug with class-level attributes (GCC bug 26905)... no
checking For x86_64 gcc visibility bug with builtins (GCC bug 20297)... no
checking for dirent.h that defines DIR... yes
checking for opendir in -ldir... no
checking for sys/byteorder.h... no
checking for compat.h... no
checking for getopt.h... yes
checking for sys/bitypes.h... yes
checking for memory.h... yes
checking for unistd.h... yes
checking for gnu/libc-version.h... yes
checking for nl_types.h... yes
checking for malloc.h... yes
checking for X11/XKBlib.h... yes
checking for io.h... no
checking for sys/statvfs.h... yes
checking for sys/statfs.h... yes
checking for sys/vfs.h... yes
checking for sys/mount.h... yes
checking for mmintrin.h... no
checking for new... yes
checking for sys/cdefs.h... yes
checking for gethostbyname_r in -lc_r... no
checking for atan in -lm... yes
checking for dlopen in -ldl... yes
checking for dlfcn.h... yes
checking for dladdr... yes
checking for socket in -lsocket... no
checking for XDrawLines in -lX11... yes
checking for XextAddDisplay in -lXext... yes
checking for XtFree in -lXt... yes
checking for XShmCreateImage in -lXext... yes
checking for X11/extensions/XShm.h... yes
checking for XieFloGeometry in -lXIE... no
checking for X11/extensions/XIElib.h... no
checking for freetype-config... /usr/bin/freetype-config
checking for FreeType - version >= 6.1.0... yes
checking for FT_Bitmap_Size.y_ppem... yes
checking for FT_GlyphSlot_Embolden... yes
checking for FT_Load_Sfnt_Table... yes
checking for FT_Select_Size... yes
checking for ARM SIMD support in compiler... no
checking for ARM NEON support in compiler... no
checking for pthread_create in -lpthreads... no
checking for pthread_create in -lpthread... yes
checking whether gcc accepts -pthread... yes
checking whether mmap() sees write()s... yes
checking whether gcc needs -traditional... no
checking for 8-bit clean memcmp... yes
checking for random... yes
checking for strerror... yes
checking for lchown... yes
checking for fchmod... yes
checking for snprintf... yes
checking for statvfs... yes
checking for memmove... yes
checking for rint... yes
checking for stat64... yes
checking for lstat64... yes
checking for truncate64... yes
checking for statvfs64... yes
checking for setbuf... yes
checking for isatty... yes
checking for flockfile... yes
checking for getpagesize... yes
checking for localtime_r... yes
checking for strtok_r... yes
checking for wcrtomb... yes
checking for mbrtowc... yes
checking for res_ninit()... yes
checking for gnu_get_libc_version()... yes
checking for iconv in -lc... yes
checking for iconv()... yes
checking for iconv() with const input... no
checking for nl_langinfo and CODESET... yes
checking for an implementation of va_copy()... yes
checking for an implementation of __va_copy()... yes
checking whether va_lists can be copied by value... yes
checking for C++ exceptions flag... -fno-exceptions
checking for gcc 3.0 ABI... yes
checking for C++ "explicit" keyword... yes
checking for C++ "typename" keyword... yes
checking for modern C++ template specialization syntax support... yes
checking whether partial template specialization works... yes
checking whether operators must be re-defined for templates derived from templates... no
checking whether we need to cast a derived template to pass as its base class... no
checking whether the compiler can resolve const ambiguities for templates... yes
checking whether the C++ "using" keyword can change access... yes
checking whether the C++ "using" keyword resolves ambiguity... yes
checking for "std::" namespace... yes
checking whether standard template operator!=() is ambiguous... unambiguous
checking for C++ reinterpret_cast... yes
checking for C++ dynamic_cast to void*... yes
checking whether C++ requires implementation of unused virtual methods... yes
checking for trouble comparing to zero near std::operator!=()... no
checking for __thread keyword for TLS variables... yes
checking for LC_MESSAGES... yes
checking for nspr-config... /usr/bin/nspr-config
checking for NSPR - version >= 4.8.0... yes
checking for nss-config... /usr/bin/nss-config
checking for NSS - version >= 3.12.6... yes
checking for jpeg_destroy_compress in -ljpeg... yes
checking for gzread in -lz... yes
checking for png_get_valid in -lpng... yes
checking for png_get_acTL in -lpng... yes
checking if app-specific confvars.sh exists... ./browser/confvars.sh
checking for pkg-config... /usr/bin/pkg-config
checking for gtk+-2.0 >= 2.10.0 gtk+-unix-print-2.0 glib-2.0 gobject-2.0 gdk-x11-2.0... yes
checking MOZ_GTK2_CFLAGS... -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14 -I/usr/include/gtk-unix-print-2.0
checking MOZ_GTK2_LIBS... -pthread -lgtk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lfreetype -lfontconfig -lgdk-x11-2.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for libstartup-notification-1.0 >= 0.8... yes
checking MOZ_STARTUP_NOTIFICATION_CFLAGS... -I/usr/include/startup-notification-1.0
checking MOZ_STARTUP_NOTIFICATION_LIBS... -lstartup-notification-1
checking for pango >= 1.14.0... yes
checking _PANGOCHK_CFLAGS... -pthread -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
checking _PANGOCHK_LIBS... -pthread -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for pango >= 1.14.0 pangoft2 >= 1.14.0... yes
checking MOZ_PANGO_CFLAGS... -pthread -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2
checking MOZ_PANGO_LIBS... -pthread -lpangoft2-1.0 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for gnome-vfs-2.0 >= 2.0 gnome-vfs-module-2.0 >= 2.0... yes
checking MOZ_GNOMEVFS_CFLAGS... -pthread -DORBIT2=1 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gnome-vfs-module-2.0
checking MOZ_GNOMEVFS_LIBS... -pthread -lgnomevfs-2 -lgconf-2 -lgmodule-2.0 -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for gconf-2.0 >= 1.2.1... yes
checking MOZ_GCONF_CFLAGS... -DORBIT2=1 -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
checking MOZ_GCONF_LIBS... -lgconf-2 -lglib-2.0
checking for libgnomeui-2.0 >= 2.2.0... yes
checking MOZ_GNOMEUI_CFLAGS... -DORBIT2=1 -pthread -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-keyring-1 -I/usr/include/libgnome-2.0 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/gail-1.0 -I/usr/include/freetype2 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libpng14
checking MOZ_GNOMEUI_LIBS... -pthread -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomevfs-2 -lgnomecanvas-2 -lgnome-2 -lpopt -lbonobo-2 -lbonobo-activation -lORBit-2 -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgconf-2 -lgmodule-2.0 -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for dbus-glib-1 >= 0.60... yes
checking MOZ_DBUS_GLIB_CFLAGS... -pthread -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
checking MOZ_DBUS_GLIB_LIBS... -pthread -ldbus-glib-1 -ldbus-1 -lpthread -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for libnotify >= 0.4... yes
checking MOZ_LIBNOTIFY_CFLAGS... -pthread -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14
checking MOZ_LIBNOTIFY_LIBS... -pthread -lnotify -lgtk-x11-2.0 -ldbus-glib-1 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgmodule-2.0 -ldbus-1 -lpthread -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking __attribute__ ((aligned ())) support... trying 64
64
checking for snd_pcm_open in -lasound... yes
checking for tar archiver... checking for gnutar... no
checking for gtar... no
checking for tar... tar
tar
checking for wget... checking for wget... wget
wget
checking for conic... checking for valid optimization flags... yes
checking size of int *... 4
checking for __builtin_vec_new... no
checking for __builtin_vec_delete... no
checking for __builtin_new... no
checking for __builtin_delete... no
checking for __pure_virtual... no
checking for __cxa_demangle... yes
checking for unwind.h... yes
checking for _Unwind_Backtrace... yes
checking for gcc -pipe support... yes
checking whether compiler supports -Wno-long-long... yes
checking whether C compiler supports -fprofile-generate... yes
checking whether C++ compiler has -pedantic long long bug... no
checking for correct temporary object destruction order... yes
checking for correct overload resolution with const and templates... no
checking for libIDL-2.0 >= 0.8.0 glib-2.0 gobject-2.0... yes
checking LIBIDL_CFLAGS... -pthread -I/usr/include/libIDL-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
checking LIBIDL_LIBS... -pthread -lIDL-2 -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for glib-2.0 >= 1.3.7 gobject-2.0... yes
checking GLIB_CFLAGS... -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
checking GLIB_LIBS... -pthread -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0
checking for stdint.h... yes
checking for inttypes.h... yes
checking for sys/int_types.h... no
checking for cairo >= 1.8.8 pixman-1 freetype2 fontconfig... yes
checking CAIRO_CFLAGS... -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14
checking CAIRO_LIBS... -lcairo -lpixman-1 -lfreetype -lfontconfig
checking for cairo-xlib-xrender >= 1.8.8... yes
checking CAIRO_XRENDER_CFLAGS... -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14
checking CAIRO_XRENDER_LIBS... -lXrender -lcairo -lX11
checking for iwlib.h... no
configure: error: Can't find header iwlib.h for Necko WiFi scanning (might be in package libiw-dev (Ubuntu) or wireless-tools-devel (Fedora)); use --disable-necko-wifi to disable
*** Fix above errors and then restart with "make -f client.mk build"
make[1]: *** [configure] Erreur 1
make[1]: quittant le répertoire « /home/daniel/Desktop/icecat/src/icecat-3.6.4 »
make: *** [/home/daniel/Desktop/icecat/src/icecat-3.6.4/Makefile] Erreur 2
Abandon...
) alors dans ce cas la, oui change le statut plutôt que de refaire un topic ou continuer avec (résolu). Une fois un problème (résolu) rare sont les gens qui vont voir le topic sauf si intéressé.