[boot]/dev/sda1 montée(résolu)

[wido]

Bonjour,
suite à une manipulation hasardeuse d'une installation de grub vers grub2, je n'arrive plus accéder à slim,j'ai désinstallé tout ce qui concernait grub2, le lancement du grub (0.97) fonctionne, les modules se chargent correctement, mais j'ai à chaque fois une analyse des différentes partitions dont le /dev/sda4 (/home) /dev/sda3 (racine) et /dev/sda1 (/boot) dans le mode maintenance.

l'analyse e2fsck de la partition sda1 ne s'effectue pas car elle est annoncée comme monté, je lance un

Code : Tout sélectionner

umount /dev/sda1

pas de retour
je refais une analyse avec e2fsck ou fsck sur cette partition, cette fois il me met en garde sur des problèmes d'écriture (forcer l'analyse)
il m'indique que la partition est propre (clean)
s'en suis un redémarrage mais toujours le même problème.
j'analyse cette fois-ci le contenu de /boot, et là je n'ai que le dossier /boot/menu, et rien d'autre.
je lance pacman pour qu'il me réinstalle le paquet kernel26, les fichiers réapparaissent (kernel26.img, et les autres)

autre info, /dev/sda1 est toujours signalé en amorce avec fdisk, j'ai lancé un liveUSB pour analyser /dev/sda1 avec fdisk toujours clean d'ailleurs.

j'apporterai plus d'information sur les retours des commandes fdisk,ls,... demain. pas de clé USB disponible

[FoolEcho]

le dossier /boot/menu

Heu... /boot/ je veux bien, /boot/grub/menu.lst aussi ... mais /boot/menu ?

Avec la réinstallation de kernel26, tu as bien retrouvé les images ainsi que System.map26 et vmlinuz26 ?
Alors, il te faut probablement replacer manuellement les librairies de grub correctement dans /boot/grub à partir de /usr/lib/grub/i386-pc/ : https://wiki.archlinux.org/index.php/GR ... _GRUB_libs
Refaire le menu.lst.
(tout ça bien sûr avec /dev/sda1 monté)

Voire réinstaller l'amorce peut-être... par précaution.

[wido]

j'ai copié les fichiers comme indiqué dans sur le wiki,
les images kernel26.img et vmlinuz26 sont bien là ainsi que le dossier /boot/grub/.

mais j'arrive toujours à l'analyse de la partition sda1 qui échoue en m'indiquant à chaque fois qu'elle est montée, umount /dev/sda1 , e2fsck /dev/sda1 est toujours montée, je tourne en rond

Je m'aperçois qu'en faite il existe un autre dossier /boot dans une autre partition (sda3) avec un fichier dont je ne peux pas l'effacer.
toutefois en montant chaques partitions vers leur dossier respectif, j'arrive à accéder au bureau.

au final, je n'arrive pas à résoudre le montage de sda1 sur le dossier /boot et dès que je modifie le menu.lst sur sda1 problème il m'envoie l'invité du grub alors que sur sda3 aucun problème, pourtant dans ce dossier il y a ldlinux.sys (/boot/syslinux), je pense passer par un liveUSB pour effacer ce fichier.

[benjarobin]

Que retourne la commande mount ?

[wido]

mauvaise nouvelle impossible d'effacer ce fichu fichier même avec un liveUSb

EDIT:

les 5emes lignes rien de spécial
proc on /proc type proc
sys on /sys type sysfs
udev on /dev type devtmpfs
/dev/sda3 on / type ext4
none on /dev/shm

et un paragraphe sur un warning mount

mount: warning: /etc/mtab is not writable (e.g. read-only filesystem)

en faisant la commande mount -n -o remount,rw/ ce paragraphe ne s'affiche plus.

EDIT:
j'essaye d'installer le grub, la partition /dev/sda1 est montée sur /boot, je lance:

Code : Tout sélectionner

grub> root (h0,0)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
 Checking if "/boot/grub/stage1" exists... no
 Checking if "/grub/stage1" exists... yes
 Checking if "/grub/stage2" exists... yes
 Checking if "/boot/grub/e2fs_stage1_5" exists... yes
 Running "embed /grub/e2fs_stage1_5 (hd0)"...  failed (this is not fatal)
Running "embed /grub/e2fs_stage1_5 (hd0,0)"...  failed (this is not fatal)
 Running "install /grub/stage1 (hd0) /grub/stage2 p /grub/menu.lst"... succeeded
Done.

[wido]

Code : Tout sélectionner

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Sat Jan 29 20:00:33 CET 2011
Command line: root=/dev/sda3 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
 BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
 BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data)
 BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: P5N-T DELUXE/P5N-T DELUXE, BIOS ASUS P5N-T DELUXE ACPI BIOS Revision 1402 01/22/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 100000000 mask FC0000000 write-back
  3 base 0BFF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfef0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f58b0] f58b0
Scanning 0 areas for low memory corruption
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfef0000
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bfef0000 page 4k
kernel direct mapping tables up to bfef0000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ bfeea000-bfef0000
RAMDISK: 37e38000 - 37ff0000
ACPI: RSDP 00000000000f7380 00024 (v02 Nvidia)
ACPI: XSDT 00000000bfef30c0 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000bfef9f80 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000bfef3240 06CF4 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bfef0000 00040
ACPI: HPET 00000000bfefa1c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 00000000bfefa240 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000bfefa0c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: SSDT 00000000bfefaac0 0087B (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff8800b0000000-ffff8800b37fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x000bfef0
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048190
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3920 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 767784 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfef0000 - 00000000bfef3000
PM: Registered nosave memory: 00000000bfef3000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f2000000
PM: Registered nosave memory: 00000000f2000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s81664 r8192 d20736 u524288
pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030264
Kernel command line: root=/dev/sda3 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4052748k/5242880k available (3751k kernel code, 1050120k absent, 140012k reserved, 2002k data, 512k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptable hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2666.648 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5335.51 BogoMIPS (lpj=8888826)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20101013
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz stepping 07
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
NMI watchdog enabled, takes one hw-pmu counter.
 #2
NMI watchdog enabled, takes one hw-pmu counter.
 #3 Ok.
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (21341.26 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 00000000bfefa2c0 001D6 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 001D6 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: SSDT 00000000bfefa730 0012F (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0012F (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: SSDT 00000000bfefa860 0012F (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0012F (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: SSDT 00000000bfefa990 0012F (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0012F (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff]
pci 0000:00:00.0: [10de:03a1] type 0 class 0x000600
pci 0000:00:00.1: [10de:03ac] type 0 class 0x000500
pci 0000:00:00.2: [10de:03aa] type 0 class 0x000500
pci 0000:00:00.3: [10de:03a9] type 0 class 0x000500
pci 0000:00:00.4: [10de:03ab] type 0 class 0x000500
pci 0000:00:00.5: [10de:03a8] type 0 class 0x000500
pci 0000:00:00.6: [10de:03b5] type 0 class 0x000500
pci 0000:00:00.7: [10de:03b4] type 0 class 0x000500
pci 0000:00:01.0: [10de:03ad] type 0 class 0x000500
pci 0000:00:01.1: [10de:03ae] type 0 class 0x000500
pci 0000:00:01.2: [10de:03af] type 0 class 0x000500
pci 0000:00:01.3: [10de:03b0] type 0 class 0x000500
pci 0000:00:01.4: [10de:03b1] type 0 class 0x000500
pci 0000:00:01.5: [10de:03b2] type 0 class 0x000500
pci 0000:00:01.6: [10de:03b3] type 0 class 0x000500
pci 0000:00:02.0: [10de:03b6] type 0 class 0x000500
pci 0000:00:02.1: [10de:03bc] type 0 class 0x000500
pci 0000:00:02.2: [10de:03ba] type 0 class 0x000500
pci 0000:00:03.0: [10de:03b7] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:09.0: [10de:0369] type 0 class 0x000500
pci 0000:00:0a.0: [10de:0360] type 0 class 0x000601
pci 0000:00:0a.1: [10de:0368] type 0 class 0x000c05
pci 0000:00:0a.1: reg 10: [io  0xff00-0xff3f]
pci 0000:00:0a.1: reg 20: [io  0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 24: [io  0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: [10de:036c] type 0 class 0x000c03
pci 0000:00:0b.0: reg 10: [mem 0xeffff000-0xefffffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: [10de:036d] type 0 class 0x000c03
pci 0000:00:0b.1: reg 10: [mem 0xefffe000-0xefffe0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: [10de:036e] type 0 class 0x000101
pci 0000:00:0d.0: reg 20: [io  0xfc00-0xfc0f]
pci 0000:00:0e.0: [10de:037f] type 0 class 0x000101
pci 0000:00:0e.0: reg 10: [io  0x09f0-0x09f7]
pci 0000:00:0e.0: reg 14: [io  0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 18: [io  0x0970-0x0977]
pci 0000:00:0e.0: reg 1c: [io  0x0b70-0x0b73]
pci 0000:00:0e.0: reg 20: [io  0xf700-0xf70f]
pci 0000:00:0e.0: reg 24: [mem 0xefffd000-0xefffdfff]
pci 0000:00:0e.1: [10de:037f] type 0 class 0x000101
pci 0000:00:0e.1: reg 10: [io  0x09e0-0x09e7]
pci 0000:00:0e.1: reg 14: [io  0x0be0-0x0be3]
pci 0000:00:0e.1: reg 18: [io  0x0960-0x0967]
pci 0000:00:0e.1: reg 1c: [io  0x0b60-0x0b63]
pci 0000:00:0e.1: reg 20: [io  0xf200-0xf20f]
pci 0000:00:0e.1: reg 24: [mem 0xefffc000-0xefffcfff]
pci 0000:00:0e.2: [10de:037f] type 0 class 0x000101
pci 0000:00:0e.2: reg 10: [io  0xf100-0xf107]
pci 0000:00:0e.2: reg 14: [io  0xf000-0xf003]
pci 0000:00:0e.2: reg 18: [io  0xef00-0xef07]
pci 0000:00:0e.2: reg 1c: [io  0xee00-0xee03]
pci 0000:00:0e.2: reg 20: [io  0xed00-0xed0f]
pci 0000:00:0e.2: reg 24: [mem 0xefffb000-0xefffbfff]
pci 0000:00:0f.0: [10de:0370] type 1 class 0x000604
pci 0000:00:0f.1: [10de:0371] type 0 class 0x000403
pci 0000:00:0f.1: reg 10: [mem 0xefff4000-0xefff7fff]
pci 0000:00:0f.1: PME# supported from D3hot D3cold
pci 0000:00:0f.1: PME# disabled
pci 0000:00:11.0: [10de:0373] type 0 class 0x000680
pci 0000:00:11.0: reg 10: [mem 0xefffa000-0xefffafff]
pci 0000:00:11.0: reg 14: [io  0xec00-0xec07]
pci 0000:00:11.0: reg 18: [mem 0xefff9000-0xefff90ff]
pci 0000:00:11.0: reg 1c: [mem 0xefff8000-0xefff800f]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: [10de:0378] type 1 class 0x000604
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:01:00.0: [10de:05b1] type 1 class 0x000604
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:03.0: PCI bridge to [bus 01-04]
pci 0000:00:03.0:   bridge window [io  0xb000-0xcfff]
pci 0000:00:03.0:   bridge window [mem 0xe6000000-0xedffffff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10de:05b1] type 1 class 0x000604
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:02.0: [10de:05b1] type 1 class 0x000604
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: PME# disabled
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0:   bridge window [io  0xb000-0xcfff]
pci 0000:01:00.0:   bridge window [mem 0xe6000000-0xedffffff]
pci 0000:01:00.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10de:0600] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xec000000-0xecffffff]
pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xea000000-0xebffffff 64bit]
pci 0000:03:00.0: reg 24: [io  0xcc00-0xcc7f]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0:   bridge window [io  0xc000-0xcfff]
pci 0000:02:00.0:   bridge window [mem 0xea000000-0xedffffff]
pci 0000:02:00.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: [10de:0600] type 0 class 0x000300
pci 0000:04:00.0: reg 10: [mem 0xe8000000-0xe8ffffff]
pci 0000:04:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xe6000000-0xe7ffffff 64bit]
pci 0000:04:00.0: reg 24: [io  0xbc00-0xbc7f]
pci 0000:04:00.0: reg 30: [mem 0xe9fe0000-0xe9ffffff pref]
pci 0000:02:02.0: PCI bridge to [bus 04-04]
pci 0000:02:02.0:   bridge window [io  0xb000-0xbfff]
pci 0000:02:02.0:   bridge window [mem 0xe6000000-0xe9ffffff]
pci 0000:02:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:05:0b.0: [1106:3044] type 0 class 0x000c00
pci 0000:05:0b.0: reg 10: [mem 0xefeff000-0xefeff7ff]
pci 0000:05:0b.0: reg 14: [io  0xdc00-0xdc7f]
pci 0000:05:0b.0: supports D2
pci 0000:05:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:05:0b.0: PME# disabled
pci 0000:00:0f.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:0f.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0f.0:   bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:0f.0:   bridge window [mem 0xefd00000-0xefdfffff pref]
pci 0000:00:0f.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:0f.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:0f.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:0f.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:0f.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
pci 0000:06:00.0: [11ab:6121] type 0 class 0x000101
pci 0000:06:00.0: reg 10: [io  0xac00-0xac07]
pci 0000:06:00.0: reg 14: [io  0xa800-0xa803]
pci 0000:06:00.0: reg 18: [io  0xa400-0xa407]
pci 0000:06:00.0: reg 1c: [io  0xa000-0xa003]
pci 0000:06:00.0: reg 20: [io  0x9c00-0x9c0f]
pci 0000:06:00.0: reg 24: [mem 0xefcff000-0xefcff3ff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0:   bridge window [io  0x9000-0xafff]
pci 0000:00:16.0:   bridge window [mem 0xefc00000-0xefcfffff]
pci 0000:00:16.0:   bridge window [mem 0xefb00000-0xefbfffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
HEST: Table is not found!
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
reserve RAM buffer: 00000000bfef0000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xbff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x1000-0x107f]
pnp 00:01: [io  0x1080-0x10ff]
pnp 00:01: [io  0x1400-0x147f]
pnp 00:01: [io  0x1480-0x14ff]
pnp 00:01: [io  0x1800-0x187f]
pnp 00:01: [io  0x1880-0x18ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0800-0x087f]
pnp 00:02: [io  0x0290-0x0297]
pnp 00:02: [io  0x0880-0x088f]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [mem 0xf0000000-0xf1ffffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x000d6400-0x000d7fff]
pnp 00:0a: [mem 0x000d0000-0x000d3fff]
pnp 00:0a: [mem 0x000f0000-0x000fbfff]
pnp 00:0a: [mem 0x000fc000-0x000fffff]
pnp 00:0a: [mem 0xfeff0000-0xfeff00ff]
pnp 00:0a: [mem 0xbfef0000-0xbfefffff]
pnp 00:0a: [mem 0xffff0000-0xffffffff]
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x00100000-0xbfeeffff]
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: [mem 0xfeff0000-0xfeff03ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x1000-0x107f] has been reserved
system 00:01: [io  0x1080-0x10ff] has been reserved
system 00:01: [io  0x1400-0x147f] has been reserved
system 00:01: [io  0x1480-0x14ff] has been reserved
system 00:01: [io  0x1800-0x187f] has been reserved
system 00:01: [io  0x1880-0x18ff] has been reserved
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0290-0x0297] has been reserved
system 00:02: [io  0x0880-0x088f] has been reserved
system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:0a: [mem 0x000d6400-0x000d7fff] has been reserved
system 00:0a: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:0a: [mem 0x000f0000-0x000fbfff] could not be reserved
system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0a: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:0a: [mem 0xbfef0000-0xbfefffff] could not be reserved
system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x00100000-0xbfeeffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xfeff0000-0xfeff03ff] could not be reserved
pci 0000:03:00.0: BAR 6: assigned [mem 0xed000000-0xed01ffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0:   bridge window [io  0xc000-0xcfff]
pci 0000:02:00.0:   bridge window [mem 0xea000000-0xedffffff]
pci 0000:02:00.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 04-04]
pci 0000:02:02.0:   bridge window [io  0xb000-0xbfff]
pci 0000:02:02.0:   bridge window [mem 0xe6000000-0xe9ffffff]
pci 0000:02:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0:   bridge window [io  0xb000-0xcfff]
pci 0000:01:00.0:   bridge window [mem 0xe6000000-0xedffffff]
pci 0000:01:00.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 01-04]
pci 0000:00:03.0:   bridge window [io  0xb000-0xcfff]
pci 0000:00:03.0:   bridge window [mem 0xe6000000-0xedffffff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:0f.0: PCI bridge to [bus 05-05]
pci 0000:00:0f.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0f.0:   bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:0f.0:   bridge window [mem 0xefd00000-0xefdfffff pref]
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0:   bridge window [io  0x9000-0xafff]
pci 0000:00:16.0:   bridge window [mem 0xefc00000-0xefcfffff]
pci 0000:00:16.0:   bridge window [mem 0xefb00000-0xefbfffff 64bit pref]
pci 0000:00:03.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:02:02.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:00:16.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xb000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xe6000000-0xedffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xb000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xe6000000-0xedffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xea000000-0xedffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xe6000000-0xe9ffffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xefe00000-0xefefffff]
pci_bus 0000:05: resource 2 [mem 0xefd00000-0xefdfffff pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xbff00000-0xfebfffff]
pci_bus 0000:06: resource 0 [io  0x9000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xefc00000-0xefcfffff]
pci_bus 0000:06: resource 2 [mem 0xefb00000-0xefbfffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1760k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bb600000 - ffff8800bf600000
software IO TLB at phys 0xbb600000 - 0xbf600000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1296500192.546:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7918
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2011-01-31 18:56:33 UTC (1296500193)
Initalizing network drop monitor service
Freeing unused kernel memory: 512k freed
udev[47]: starting version 165
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:0d.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
pata_acpi 0000:00:0e.0: setting latency timer to 64
pata_acpi 0000:00:0e.0: PCI INT A disabled
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
pata_acpi 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:0e.1: setting latency timer to 64
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
pata_acpi 0000:00:0e.1: PCI INT B disabled
pata_marvell 0000:06:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:06:00.0: setting latency timer to 64
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
pata_acpi 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:0e.2: setting latency timer to 64
pata_acpi 0000:00:0e.2: PCI INT C disabled
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa800 bmdma 0x9c00 irq 16
ata2: PATA max UDMA/133 cmd 0xa400 ctl 0xa000 bmdma 0x9c08 irq 16
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 23
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 23
sata_nv 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0e.1: Using SWNCQ mode
sata_nv 0000:00:0e.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 22
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 22
sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.2: Using SWNCQ mode
sata_nv 0000:00:0e.2: setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 21
ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 21
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi8 : pata_amd
scsi9 : pata_amd
ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata9: port disabled. ignoring.
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: ATA-7: WDC WD1500ADFD-00NLR5, 21.07QR5, max UDMA/133
ata3.00: 293046768 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 21.0 PQ: 0 ANSI: 5
ata7.00: ATAPI: SONY    DVD-ROM DDU1615S, EYN1, max UDMA/100
ata7.00: configured for UDMA/100
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: WDC WD1500ADFD-00NLR5, 21.07QR5, max UDMA/133
ata4.00: 293046768 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 21.0 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sdb] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
 sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: CD-ROM            SONY     DVD-ROM DDU1615S EYN1 PQ: 0 ANSI: 5
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ATAPI: PIONEER DVD-RW  DVR-215D, 1.13, max UDMA/66
ata8.00: configured for UDMA/66
scsi 7:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-215D 1.13 PQ: 0 ANSI: 5
ata10: port disabled. ignoring.
sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 7:0:0:0: Attached scsi CD-ROM sr1
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udev[704]: starting version 165
loop: module loaded
fuse init (API version 7.15)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sr 6:0:0:0: Attached scsi generic sg3 type 5
sr 7:0:0:0: Attached scsi generic sg4 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input0
ACPI: resource nForce2_smbus [io  0x1c00-0x1c3f] conflicts with ACPI region SM00 [io  0x1c00-0x1c05 64bit disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource nForce2_smbus [io  0x1c80-0x1cbf] conflicts with ACPI region SM01 [mem 0x00001c80-0x00001c85 64bit disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:0f.1: setting latency timer to 64
ACPI: Fan [FAN] (on)
ACPI: acpi_idle registered with cpuidle
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
firewire_ohci 0000:05:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
hda_codec: AD1988B: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.1/input/input3
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:11.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:11.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
firewire_core: created device fw0: GUID 001e8c00010b2aed, S400
EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
nvidia 0000:03:00.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
nvidia 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:03:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
nvidia 0000:04:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:04:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.36  Tue Jan 18 16:56:11 PST 2011
forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1e:8c:cf:67:1d
forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xefffe000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 21, io mem 0xeffff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
EXT4-fs (sda3): re-mounted. Opts: (null)
usb 2-4: new low speed USB device using ohci_hcd and address 2
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input4
generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:0b.0-4/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-9: new low speed USB device using ohci_hcd and address 3
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-9/2-9:1.0/input/input5
generic-usb 0003:046D:C01E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-9/input0
usb 1-6: new high speed USB device using ehci_hcd and address 4
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi10 : usb-storage 1-6:1.0
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver uas
scsi 10:0:0:0: Direct-Access     FUJITSU  MHV2080AT        0000 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 27 00 00 00
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] Attached SCSI disk
EXT4-fs (sda3): re-mounted. Opts: (null)
usb 1-6: USB disconnect, address 4
usb 1-5: new high speed USB device using ehci_hcd and address 5
scsi11 : usb-storage 1-5:1.0
scsi 11:0:0:0: Direct-Access     FUJITSU  MHV2080AT        0000 PQ: 0 ANSI: 0
sd 11:0:0:0: Attached scsi generic sg5 type 0
sd 11:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 27 00 00 00
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] Attached SCSI disk
usb 1-5: USB disconnect, address 5
usb 1-6: new high speed USB device using ehci_hcd and address 6
scsi12 : usb-storage 1-6:1.0
scsi 12:0:0:0: Direct-Access     UDISK    PDU15_4G 6BG2.0  0.00 PQ: 0 ANSI: 2
sd 12:0:0:0: Attached scsi generic sg5 type 0
sd 12:0:0:0: [sdd] 8060927 512-byte logical blocks: (4.12 GB/3.84 GiB)
sd 12:0:0:0: [sdd] Write Protect is off
sd 12:0:0:0: [sdd] Mode Sense: 00 00 00 00
sd 12:0:0:0: [sdd] Assuming drive cache: write through
sd 12:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 12:0:0:0: [sdd] Assuming drive cache: write through
sd 12:0:0:0: [sdd] Attached SCSI removable disk
UDF-fs: No anchor found
UDF-fs: Rescanning with blocksize 2048
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF: Mounting volume 'ARCH_201005', timestamp 2010/05/16 15:30 (103c)
usb 1-6: USB disconnect, address 6
usb 1-6: new high speed USB device using ehci_hcd and address 7
scsi13 : usb-storage 1-6:1.0
scsi 13:0:0:0: Direct-Access     FUJITSU  MHV2080AT        0000 PQ: 0 ANSI: 0
sd 13:0:0:0: Attached scsi generic sg5 type 0
sd 13:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 27 00 00 00
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] Attached SCSI disk
usb 1-6: USB disconnect, address 7
usb 1-6: new high speed USB device using ehci_hcd and address 8
scsi14 : usb-storage 1-6:1.0
scsi 14:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
sd 14:0:0:0: Attached scsi generic sg5 type 0
sd 14:0:0:0: [sdd] 15810048 512-byte logical blocks: (8.09 GB/7.53 GiB)
sd 14:0:0:0: [sdd] Write Protect is off
sd 14:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 14:0:0:0: [sdd] Assuming drive cache: write through
sd 14:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 14:0:0:0: [sdd] Assuming drive cache: write through
sd 14:0:0:0: [sdd] Attached SCSI removable disk

Code : Tout sélectionner

Disque /dev/sdb: 150.0 Go, 150039945216 octets
255 têtes, 63 secteurs/piste, 18241 cylindres, total 293046768 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x358d64fc

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdb1            2048   293046271   146522112   83  Linux

Disque /dev/sdc: 1000.2 Go, 1000204886016 octets
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x000af509

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdc1            2048  1953523711   976760832   83  Linux

Disque /dev/sda: 150.0 Go, 150039945216 octets
255 têtes, 63 secteurs/piste, 18241 cylindres, total 293046768 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x358d64ff

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1   *           1       80324       40162   83  Linux
/dev/sda2           80325      610469      265072+  82  Linux swap / Solaris
/dev/sda3          610470   143974529    71682030   83  Linux
/dev/sda4       143974530   293041664    74533567+  83  Linux

Disque /dev/sdd: 8094 Mo, 8094744576 octets
74 têtes, 9 secteurs/piste, 23738 cylindres, total 15810048 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x14f816b4

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdd1            8064    15810047     7900992    c  W95 FAT32 (LBA)

/etc/mtab:

Code : Tout sélectionner

proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=506593,mode=755 0 0
/dev/sda3 / ext4 rw,relatime,barrier=1,data=ordered 0 0
none /dev/shm tmpfs rw 0 0

blkid:

Code : Tout sélectionner

/dev/sda1: UUID="89a6259c-e0f0-42a7-9129-6ae99e7cda51" TYPE="ext2" 
/dev/sda2: UUID="d415af78-3341-4243-9033-9d4101e72193" TYPE="swap" 
/dev/sda3: UUID="e5a24010-c324-48c8-bed5-c445d34d4677" TYPE="ext4" 
/dev/sda4: UUID="420abe87-2cc2-4efb-bbe7-49d257abebe1" TYPE="ext4" 
/dev/sdb1: LABEL="HDD120" UUID="c3cca386-e1d4-47fa-a0bf-de0a8cbfa12c" TYPE="ext4" 
/dev/sdc1: LABEL="TERATOR" UUID="5001af8e-ed5d-4d7a-93fd-3dbd88fdff03" TYPE="ext4" 
/dev/sdd1: LABEL="LUMINES" UUID="E950-5765" TYPE="vfat" 

fstab:

Code : Tout sélectionner

# 
# /etc/fstab: static file system information
#
# <file system>        <dir>         <type>    <options>          <dump> <pass>
none                   /dev/pts      devpts    defaults            0      0
none                   /dev/shm      tmpfs     defaults            0      0

#/dev/cdrom             /media/cd   auto    ro,user,noauto,unhide   0      0
#/dev/dvd               /media/dvd  auto    ro,user,noauto,unhide   0      0
#/dev/fd0               /media/fl   auto    user,noauto             0      0

UUID=420abe87-2cc2-4efb-bbe7-49d257abebe1 /home ext4 defaults 0 1
UUID=89a6259c-e0f0-42a7-9129-6ae99e7cda51 /boot ext2 defaults 0 1
#/dev/sda1 /boot ext2 defaults 0 1
UUID=d415af78-3341-4243-9033-9d4101e72193 swap swap defaults 0 0
UUID=e5a24010-c324-48c8-bed5-c445d34d4677 / ext4 defaults 0 1
#/dev/sdb1 120go
UUID=c3cca386-e1d4-47fa-a0bf-de0a8cbfa12c /media/HDD120 ext4 rw,auto 0 0
#/dev/sdc 1 Tera
UUID=5001af8e-ed5d-4d7a-93fd-3dbd88fdff03 /media/TERATOR/ ext4 rw,auto 0 0

Code : Tout sélectionner

# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst

# DEVICE NAME CONVERSIONS 
#
#  Linux           Grub
# -------------------------
#  /dev/fd0        (fd0)
#  /dev/sda        (hd0)
#  /dev/sdb2       (hd1,1)
#  /dev/sda3       (hd0,2)
#

#  FRAMEBUFFER RESOLUTION SETTINGS
#     +-------------------------------------------------+
#          | 640x480    800x600    1024x768   1280x1024
#      ----+--------------------------------------------
#      256 | 0x301=769  0x303=771  0x305=773   0x307=775
#      32K | 0x310=784  0x313=787  0x316=790   0x319=793
#      64K | 0x311=785  0x314=788  0x317=791   0x31A=794
#      16M | 0x312=786  0x315=789  0x318=792   0x31B=795
#     +-------------------------------------------------+
#  for more details and different resolutions see
#  http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution 

# general configuration:
timeout   5
default   0
color light-blue/black light-cyan/blue

# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

# (0) Arch Linux
title  Arch Linux  [/boot/vmlinuz26]
root   (hd0,0)
kernel /vmlinuz26 root=/dev/sda1 ro
initrd /kernel26.img

# (1) Save
title archTest
root (hd0,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img

# (1) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1

[benjarobin]

Ton système est juste entièrement en read only.
La partition doit être corrompu. Il faut réparer depuis un livecd.

[wido]

j'ai démonté sda1 et sda4 avec le liveUSB car c'est cela qui n'arrivent pas à se monter. je lance ces commandes:

Code : Tout sélectionner

umount /dev/sda1
umount /dev/sda4

et je lance un

Code : Tout sélectionner

fsck /dev/sda1
fsck /dev/sda4

ou

Code : Tout sélectionner

e2fsck /dev/sda1
e2fsck /dev/sda4

pour le sda1 il me dit : "/dev/sda1 n'a pas été démonté proprement, vérification forcée"
l'analyse se fait (en une ligne)
et l'autre /dev/sda4 est propre

je reboote mais sous le mode maintenance, les partitions sda1 et sda4 sont signalées comme monté pas de e2fsck possible, je lance la commande comme indiqué:

Code : Tout sélectionner

mount -n -o remount,rw

/
je reboote et toujours au même point.

[benjarobin]

Attends, ce qui se passe est normal.
En mode maintenance tu es en mode read only. Car il a échoué sur quelques chose. Donc le système se protège.
Donc ton système de fichier est bon (enfin si le scan depuis un liveCD se passe bien).
Donc pourquoi tu rentre en mode maintenance ? Quelle est l'erreur ?
Ce n'est pas très clair, je pense que tu cherche dans la mauvaise direction

[wido]

le système passe en maintenance à chaque reboot, à cause des deux partitions sda1 et sda4 qui sont "montés" d'après le système et que e2fsck n'a pas pu lancer son scan.

en passant par le liveUSB, je lance un tune2fs, il annonce Filesystem OS type: not clean sur la partition sda1, le reste des autres partitions sont clean. je lance e2fsck /dev/sda1 puis reboot, là toujours le même mode maintenance et toujours les mêmes partitions montés avec e2fsck qui n'a pas pu lancer son scan.

N'y a t-il pas un fichier à débloquer les partitions? pour passer le scan et démarrer normalement le pc?

[Drexya]

Il est possible de "zapper" le scan des partitions en éditant le fichier "fstab" :

UUID=0ec94dbe-d30a-4d28-9ebc-dd11cb9e0564 /mnt/home3 ext4 auto,users,rw,noatime 0 1

Il faut remplacer le "1" (en gras) par "0" sur les partitions qui te posent problème, je te conseille tout de même de réactiver le scan le plus tôt possible qui est bien utile si il y a une corruption du système de fichier par exemple après un crash système.

[wido]

le gros problème c'est que mes scans sont bons et correctes mais c'est après le grub que ça coince, il veut absolument les scanner, je ne vais pas me répéter même la commande umount et un scan avec fsck il me dit encore que la partition est montée .
même ta ligne que j'ai mise n'est pas prise en compte:

UUID=[UUID du sda4] /home ext4 auto,rw,noatime 0 1
UUID=[UUID du sda1] /boot ext2 auto,rw,noatime 0 1

[Drexya]

Tu as bien mis "0" à la place du "1" ?

[wido]

Je n'avais pas fait attention, oui ça passe

Sous gparted, j'ai deux points de montage
/dev/sda1 /boot /media/usbhd-sda1
/dev/sda4 /home /media/usbhd-sda4
comment retirer l'erreur?

[Drexya]

Aucune idée , j'ai eu le même souci que toi il y a quelques temps, j'ai juste réactivé le scan au boot quelques jours/semaines après l'avoir désactivé, et je n'ai plus eu d'erreurs...

[wido]

c'est résolu, en faite ça vient d'une règle udev
il suffit de modifier le fichier

Code : Tout sélectionner

/etc/etc/udev/rules.d/11-media-by-label-auto-mount.rules

la ligne

Code : Tout sélectionner

KERNEL!="sd[a-z][0-9]", GOTO="media_by_label_auto_mount_end"

par

Code : Tout sélectionner

KERNEL!="sd[c-z][0-9]", GOTO="media_by_label_auto_mount_end"

voir le #7 de cette page : https://bbs.archlinux.org/viewtopic.php?pid=827619

j'ai modifié le /etc/fstab comme au début, les vérifications ont passées sans problème.

Merci à tous ce qui m'ont aidé