Code : Tout sélectionner
[kevin@eeePC ~]$ cat /var/log/Xorg.0.log
[ 17.205]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 17.205] X Protocol Version 11, Revision 0
[ 17.205] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 17.205] Current Operating System: Linux eeePC 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011 x86_64
[ 17.206] Kernel command line: root=/dev/sda5 ro acpi_osi=Linux
[ 17.206] Build Date: 16 April 2011 12:02:01PM
[ 17.206]
[ 17.206] Current version of pixman: 0.20.2
[ 17.206] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.206] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.206] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 17 13:19:23 2011
[ 17.341] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.424] (==) No Layout section. Using the first Screen section.
[ 17.424] (==) No screen section available. Using defaults.
[ 17.424] (**) |-->Screen "Default Screen Section" (0)
[ 17.424] (**) | |-->Monitor "<default monitor>"
[ 17.445] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.445] (==) Automatically adding devices
[ 17.445] (==) Automatically enabling devices
[ 17.562] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.562] Entry deleted from font path.
[ 17.624] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17.624] Entry deleted from font path.
[ 17.624] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17.624] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17.624] Entry deleted from font path.
[ 17.625] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17.625] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17.625] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.625] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.625] (II) Loader magic: 0x7d6fa0
[ 17.625] (II) Module ABI versions:
[ 17.625] X.Org ANSI C Emulation: 0.4
[ 17.625] X.Org Video Driver: 10.0
[ 17.625] X.Org XInput driver : 12.2
[ 17.625] X.Org Server Extension : 5.0
[ 17.628] (--) PCI:*(0:0:2:0) 8086:a011:1043:83ac rev 0, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7d00000/1048576, I/O @ 0x0000dc00/8
[ 17.628] (--) PCI: (0:0:2:1) 8086:a012:1043:83ac rev 0, Mem @ 0xf7e80000/524288
[ 17.628] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17.628] (II) LoadModule: "extmod"
[ 17.718] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 17.729] (II) Module extmod: vendor="X.Org Foundation"
[ 17.729] compiled for 1.10.1, module version = 1.0.0
[ 17.729] Module class: X.Org Server Extension
[ 17.729] ABI class: X.Org Server Extension, version 5.0
[ 17.729] (II) Loading extension MIT-SCREEN-SAVER
[ 17.729] (II) Loading extension XFree86-VidModeExtension
[ 17.729] (II) Loading extension XFree86-DGA
[ 17.729] (II) Loading extension DPMS
[ 17.729] (II) Loading extension XVideo
[ 17.729] (II) Loading extension XVideo-MotionCompensation
[ 17.729] (II) Loading extension X-Resource
[ 17.729] (II) LoadModule: "dbe"
[ 17.730] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 17.751] (II) Module dbe: vendor="X.Org Foundation"
[ 17.751] compiled for 1.10.1, module version = 1.0.0
[ 17.751] Module class: X.Org Server Extension
[ 17.751] ABI class: X.Org Server Extension, version 5.0
[ 17.751] (II) Loading extension DOUBLE-BUFFER
[ 17.751] (II) LoadModule: "glx"
[ 17.752] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.791] (II) Module glx: vendor="X.Org Foundation"
[ 17.791] compiled for 1.10.1, module version = 1.0.0
[ 17.791] ABI class: X.Org Server Extension, version 5.0
[ 17.791] (==) AIGLX enabled
[ 17.791] (II) Loading extension GLX
[ 17.803] (II) LoadModule: "record"
[ 17.804] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 17.828] (II) Module record: vendor="X.Org Foundation"
[ 17.828] compiled for 1.10.1, module version = 1.13.0
[ 17.828] Module class: X.Org Server Extension
[ 17.828] ABI class: X.Org Server Extension, version 5.0
[ 17.828] (II) Loading extension RECORD
[ 17.828] (II) LoadModule: "dri"
[ 17.829] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.886] (II) Module dri: vendor="X.Org Foundation"
[ 17.886] compiled for 1.10.1, module version = 1.0.0
[ 17.886] ABI class: X.Org Server Extension, version 5.0
[ 17.886] (II) Loading extension XFree86-DRI
[ 17.886] (II) LoadModule: "dri2"
[ 17.886] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.887] (II) Module dri2: vendor="X.Org Foundation"
[ 17.887] compiled for 1.10.1, module version = 1.2.0
[ 17.887] ABI class: X.Org Server Extension, version 5.0
[ 17.887] (II) Loading extension DRI2
[ 17.887] (==) Matched intel as autoconfigured driver 0
[ 17.888] (==) Matched vesa as autoconfigured driver 1
[ 17.888] (==) Matched fbdev as autoconfigured driver 2
[ 17.888] (==) Assigned the driver to the xf86ConfigLayout
[ 17.888] (II) LoadModule: "intel"
[ 17.888] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 17.948] (II) Module intel: vendor="X.Org Foundation"
[ 17.948] compiled for 1.10.0.902, module version = 2.15.0
[ 17.948] Module class: X.Org Video Driver
[ 17.948] ABI class: X.Org Video Driver, version 10.0
[ 17.949] (II) LoadModule: "vesa"
[ 17.994] (WW) Warning, couldn't open module vesa
[ 17.994] (II) UnloadModule: "vesa"
[ 17.994] (II) Unloading vesa
[ 17.994] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 17.994] (II) LoadModule: "fbdev"
[ 17.995] (WW) Warning, couldn't open module fbdev
[ 17.995] (II) UnloadModule: "fbdev"
[ 17.995] (II) Unloading fbdev
[ 17.995] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 17.995] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 17.996] (++) using VT number 7
[ 18.007] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.007] drmOpenDevice: node name is /dev/dri/card0
[ 18.007] drmOpenDevice: open result is 11, (OK)
[ 18.007] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 18.008] drmOpenDevice: node name is /dev/dri/card0
[ 18.008] drmOpenDevice: open result is 11, (OK)
[ 18.008] drmOpenByBusid: drmOpenMinor returns 11
[ 18.008] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 18.008] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.008] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.008] (==) intel(0): RGB weight 888
[ 18.008] (==) intel(0): Default visual is TrueColor
[ 18.008] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[ 18.008] (--) intel(0): Chipset: "Pineview GM"
[ 18.008] (**) intel(0): Relaxed fencing enabled
[ 18.008] (**) intel(0): Framebuffer tiled
[ 18.008] (**) intel(0): Pixmaps tiled
[ 18.008] (**) intel(0): 3D buffers tiled
[ 18.008] (**) intel(0): SwapBuffers wait enabled
[ 18.008] (==) intel(0): video overlay key set to 0x101fe
[ 18.024] (II) intel(0): Output LVDS1 has no monitor section
[ 18.024] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 18.056] (II) intel(0): Output VGA1 has no monitor section
[ 18.057] (II) intel(0): EDID for output LVDS1
[ 18.057] (II) intel(0): Manufacturer: SEC Model: 3130 Serial#: 0
[ 18.057] (II) intel(0): Year: 2010 Week: 0
[ 18.057] (II) intel(0): EDID Version: 1.3
[ 18.057] (II) intel(0): Digital Display Input
[ 18.057] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 18.057] (II) intel(0): Gamma: 2.20
[ 18.057] (II) intel(0): No DPMS capabilities specified
[ 18.057] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.057] (II) intel(0): First detailed timing is preferred mode
[ 18.057] (II) intel(0): redX: 0.553 redY: 0.318 greenX: 0.352 greenY: 0.586
[ 18.057] (II) intel(0): blueX: 0.165 blueY: 0.110 whiteX: 0.313 whiteY: 0.329
[ 18.057] (II) intel(0): Manufacturer's mask: 0
[ 18.057] (II) intel(0): Supported detailed timing:
[ 18.057] (II) intel(0): clock: 54.2 MHz Image Size: 223 x 125 mm
[ 18.057] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 18.057] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 609 v_blanking: 670 v_border: 0
[ 18.057] (II) intel(0): Unknown vendor-specific block f
[ 18.057] (II) intel(0): SAMSUNG
[ 18.057] (II) intel(0): 101NT06-202
[ 18.057] (II) intel(0): EDID (in hex):
[ 18.058] (II) intel(0): 00ffffffffffff004ca3303100000000
[ 18.058] (II) intel(0): 0014010380160d780aa0558d515a962a
[ 18.058] (II) intel(0): 1c505400000001010101010101010101
[ 18.058] (II) intel(0): 0101010101012c150040415846201888
[ 18.058] (II) intel(0): 3600df7d000000190000000f00000000
[ 18.058] (II) intel(0): 00000000002387026400000000fe0053
[ 18.058] (II) intel(0): 414d53554e470a2020202020000000fe
[ 18.058] (II) intel(0): 003130314e5430362d3230320a200089
[ 18.058] (II) intel(0): EDID vendor "SEC", prod id 12592
[ 18.058] (II) intel(0): Printing DDC gathered Modelines:
[ 18.058] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 18.058] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 18.058] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.058] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.058] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 18.058] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 18.058] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 18.058] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 18.059] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 18.059] (II) intel(0): Printing probed modes for output LVDS1
[ 18.059] (II) intel(0): Modeline "1024x600"x60.2 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 18.059] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.059] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.059] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.090] (II) intel(0): EDID for output VGA1
[ 18.090] (II) intel(0): Output LVDS1 connected
[ 18.090] (II) intel(0): Output VGA1 disconnected
[ 18.090] (II) intel(0): Using exact sizes for initial modes
[ 18.090] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 18.090] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.090] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.090] (**) intel(0): Display dimensions: (220, 130) mm
[ 18.090] (**) intel(0): DPI set to (118, 117)
[ 18.090] (II) Loading sub module "fb"
[ 18.090] (II) LoadModule: "fb"
[ 18.091] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.099] (II) Module fb: vendor="X.Org Foundation"
[ 18.099] compiled for 1.10.1, module version = 1.0.0
[ 18.100] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.100] (II) Loading sub module "dri2"
[ 18.100] (II) LoadModule: "dri2"
[ 18.100] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.100] (II) Module dri2: vendor="X.Org Foundation"
[ 18.100] compiled for 1.10.1, module version = 1.2.0
[ 18.100] ABI class: X.Org Server Extension, version 5.0
[ 18.100] (==) Depth 24 pixmap format is 32 bpp
[ 18.101] (II) intel(0): [DRI2] Setup complete
[ 18.101] (II) intel(0): [DRI2] DRI driver: i915
[ 18.101] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 18.147] (II) UXA(0): Driver registered support for the following operations:
[ 18.147] (II) solid
[ 18.147] (II) copy
[ 18.147] (II) composite (RENDER acceleration)
[ 18.147] (II) put_image
[ 18.147] (II) get_image
[ 18.147] (==) intel(0): Backing store disabled
[ 18.147] (==) intel(0): Silken mouse enabled
[ 18.148] (II) intel(0): Initializing HW Cursor
[ 18.193] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.205] (==) intel(0): DPMS enabled
[ 18.205] (==) intel(0): Intel XvMC decoder disabled
[ 18.205] (II) intel(0): Set up textured video
[ 18.205] (II) intel(0): Set up overlay video
[ 18.205] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.205] (==) intel(0): hotplug detection: "enabled"
[ 18.206] (--) RandR disabled
[ 18.206] (II) Initializing built-in extension Generic Event Extension
[ 18.206] (II) Initializing built-in extension SHAPE
[ 18.206] (II) Initializing built-in extension MIT-SHM
[ 18.206] (II) Initializing built-in extension XInputExtension
[ 18.206] (II) Initializing built-in extension XTEST
[ 18.206] (II) Initializing built-in extension BIG-REQUESTS
[ 18.206] (II) Initializing built-in extension SYNC
[ 18.206] (II) Initializing built-in extension XKEYBOARD
[ 18.206] (II) Initializing built-in extension XC-MISC
[ 18.206] (II) Initializing built-in extension SECURITY
[ 18.206] (II) Initializing built-in extension XINERAMA
[ 18.206] (II) Initializing built-in extension XFIXES
[ 18.206] (II) Initializing built-in extension RENDER
[ 18.207] (II) Initializing built-in extension RANDR
[ 18.207] (II) Initializing built-in extension COMPOSITE
[ 18.207] (II) Initializing built-in extension DAMAGE
[ 18.561] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.561] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.561] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.561] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 18.561] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.561] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 18.562] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.563] (II) intel(0): Setting screen physical size to 270 x 158
[ 19.606] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 19.607] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.607] (II) LoadModule: "evdev"
[ 19.608] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.624] (II) Module evdev: vendor="X.Org Foundation"
[ 19.624] compiled for 1.10.0, module version = 2.6.0
[ 19.625] Module class: X.Org XInput Driver
[ 19.625] ABI class: X.Org XInput driver, version 12.2
[ 19.625] (II) Using input driver 'evdev' for 'Power Button'
[ 19.625] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.625] (**) Power Button: always reports core events
[ 19.625] (**) Power Button: Device: "/dev/input/event5"
[ 19.643] (--) Power Button: Found keys
[ 19.643] (II) Power Button: Configuring as keyboard
[ 19.643] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 19.643] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 19.643] (**) Option "xkb_rules" "evdev"
[ 19.644] (**) Option "xkb_model" "evdev"
[ 19.644] (**) Option "xkb_layout" "fr"
[ 19.644] (**) Option "xkb_options" "terminate:_ctrl_alt_bksp"
[ 20.123] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 20.123] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.123] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.123] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.123] (**) Video Bus: always reports core events
[ 20.123] (**) Video Bus: Device: "/dev/input/event9"
[ 20.133] (--) Video Bus: Found keys
[ 20.133] (II) Video Bus: Configuring as keyboard
[ 20.133] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 20.133] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 20.133] (**) Option "xkb_rules" "evdev"
[ 20.133] (**) Option "xkb_model" "evdev"
[ 20.133] (**) Option "xkb_layout" "fr"
[ 20.133] (**) Option "xkb_options" "terminate:_ctrl_alt_bksp"
[ 20.174] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 20.174] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.174] (II) Using input driver 'evdev' for 'Power Button'
[ 20.174] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.174] (**) Power Button: always reports core events
[ 20.174] (**) Power Button: Device: "/dev/input/event4"
[ 20.186] (--) Power Button: Found keys
[ 20.186] (II) Power Button: Configuring as keyboard
[ 20.186] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 20.187] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.187] (**) Option "xkb_rules" "evdev"
[ 20.187] (**) Option "xkb_model" "evdev"
[ 20.187] (**) Option "xkb_layout" "fr"
[ 20.187] (**) Option "xkb_options" "terminate:_ctrl_alt_bksp"
[ 20.188] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 20.188] (II) No input driver/identifier specified (ignoring)
[ 20.189] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 20.189] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 20.189] (II) Using input driver 'evdev' for 'Sleep Button'
[ 20.189] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.189] (**) Sleep Button: always reports core events
[ 20.190] (**) Sleep Button: Device: "/dev/input/event3"
[ 20.203] (--) Sleep Button: Found keys
[ 20.203] (II) Sleep Button: Configuring as keyboard
[ 20.203] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 20.203] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 20.203] (**) Option "xkb_rules" "evdev"
[ 20.203] (**) Option "xkb_model" "evdev"
[ 20.203] (**) Option "xkb_layout" "fr"
[ 20.203] (**) Option "xkb_options" "terminate:_ctrl_alt_bksp"
[ 20.211] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 20.211] (II) No input driver/identifier specified (ignoring)
[ 20.219] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[ 20.219] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 20.219] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 20.219] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.219] (**) USB 2.0 Camera: always reports core events
[ 20.220] (**) USB 2.0 Camera: Device: "/dev/input/event8"
[ 20.233] (--) USB 2.0 Camera: Found keys
[ 20.233] (II) USB 2.0 Camera: Configuring as keyboard
[ 20.233] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input8/event8"
[ 20.233] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[ 20.233] (**) Option "xkb_rules" "evdev"
[ 20.233] (**) Option "xkb_model" "evdev"
[ 20.233] (**) Option "xkb_layout" "fr"
[ 20.233] (**) Option "xkb_options" "terminate:_ctrl_alt_bksp"
[ 20.246] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event6)
[ 20.246] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
[ 20.246] (II) Using input driver 'evdev' for 'Asus EeePC extra buttons'
[ 20.246] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.246] (**) Asus EeePC extra buttons: always reports core events
[ 20.247] (**) Asus EeePC extra buttons: Device: "/dev/input/event6"
[ 20.260] (--) Asus EeePC extra buttons: Found keys
[ 20.260] (II) Asus EeePC extra buttons: Configuring as keyboard
[ 20.260] (**) Option "config_info" "udev:/sys/devices/platform/eeepc/input/input6/event6"
[ 20.260] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD)
[ 20.260] (**) Option "xkb_rules" "evdev"
[ 20.260] (**) Option "xkb_model" "evdev"
[ 20.260] (**) Option "xkb_layout" "fr"
[ 20.260] (**) Option "xkb_options" "terminate:_ctrl_alt_bksp"
[ 20.262] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 20.262] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.262] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 20.263] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.263] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.263] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 20.273] (--) AT Translated Set 2 keyboard: Found keys
[ 20.273] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 20.273] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 20.273] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 20.273] (**) Option "xkb_rules" "evdev"
[ 20.273] (**) Option "xkb_model" "evdev"
[ 20.273] (**) Option "xkb_layout" "fr"
[ 20.273] (**) Option "xkb_options" "terminate:_ctrl_alt_bksp"
[ 20.275] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 20.275] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 20.275] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 20.275] (II) LoadModule: "synaptics"
[ 20.276] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.370] (II) Module synaptics: vendor="X.Org Foundation"
[ 20.370] compiled for 1.10.0, module version = 1.4.0
[ 20.370] Module class: X.Org XInput Driver
[ 20.370] ABI class: X.Org XInput driver, version 12.2
[ 20.370] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 20.370] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.370] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 20.371] (**) Option "Device" "/dev/input/event7"
[ 20.426] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5808
[ 20.426] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4842
[ 20.426] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 20.426] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 20.427] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 20.427] (**) Option "EmulateTwoFingerMinZ" "10"
[ 20.427] (**) Option "EmulateTwoFingerMinW" "7"
[ 20.427] (**) Option "VertEdgeScroll" "false"
[ 20.427] (**) Option "HorizEdgeScroll" "false"
[ 20.427] (**) Option "VertTwoFingerScroll" "true"
[ 20.427] (**) Option "HorizTwoFingerScroll" "true"
[ 20.427] (**) Option "TapButton1" "1"
[ 20.427] (**) Option "TapButton2" "2"
[ 20.427] (**) Option "TapButton3" "3"
[ 20.473] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 20.473] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 20.496] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 20.496] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 20.497] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 20.497] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 20.497] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 20.498] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 20.498] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 20.498] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 20.498] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 20.536] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 20.537] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 20.538] (II) No input driver/identifier specified (ignoring)
[ 20.539] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 20.539] (II) No input driver/identifier specified (ignoring)
[ 40.984] (II) intel(0): EDID vendor "SEC", prod id 12592
[ 40.984] (II) intel(0): Printing DDC gathered Modelines:
[ 40.984] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 41.019] (II) intel(0): EDID vendor "SEC", prod id 12592
[ 41.019] (II) intel(0): Printing DDC gathered Modelines:
[ 41.019] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
De ce que j'en ai compris : le module intel est chargé, vesa ne charge pas, le DRI est activé, que faut-il regarder de plus ?
Au passage, je n'ai pas de xorg.conf, depuis le passage de la configuration dans xorg.conf.d je comprends encore moins qu'avant comment ça marche donc je me contente de mettre les fichiers qu'on me dit, pas encore eu le temps de me pencher dessus.
