[Xfreeze] X semble freezer... ou non (résolu)

[GuilouV]

Bonjour,

Alors avant toute chose je ne vous bombarderez pas de tous les détails possibles et dont beaucoup seront inutiles. Alors bien sûr je serai ravi de vous donner ce qui pourra aider à votre demande (laissez moi juste le temps je suis en décalage de 7H vivant aux USA).

Donc le souci est "simple" (pas tant, enfin pour moi, sinon je ne vous dérangerai pas) : X freeze. C'est à dire que je n'ai soudainement plus ni souris, ni clavier, ni... rien. Il me semble que le problème survienne le plus fréquemment quelques minutes après le réveil de xscreensaver mais je ne suis ps certain que ce soit le seul moment (enfin ça peut peut être aiguiller).

Pour conclure je dirai juste que ce que je qualifie de freeze ne semble pas l'être selon ce site (https://wiki.ubuntu.com/X/Troubleshooting/Freeze) car dans 90% des cas mes freezes stoppent après quelques longues minutes. A noter également que j'ai tenté les solutions de mettre DPMS off et également de supprimer tout appel à l'openGL.

Si vous pouvez m'aider mettre fin à ce souci récurent et très handicapant j'en serai ravi.

Merci.

[hansi]

Salut,

A mon avis il faudrait tester de lancer X sans WM pour voir si c'est bien uniquement X qui coince et si ça frise quand même.
Pour info j'ai eu exactement le même soucis avec un Thinkpad Tablet mais sous Ubuntu 10.04 et 11.04... Résolu en passant à Arch.
Quelle est ta config ? CG et processeur ?

[GuilouV]

Merci.
Ma carte graph est une Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
Mon proc est un Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz.

Côté WM faudrait que j'en installe un autre (je vais souffrir ^^). Je n'utilise que Awesomewm (pas de DE).

[hansi]

On dirait que le soucis vient de la CG, c'est la même sur le Tablet
Ton système est bien full à jour ? Si tu pouvais aussi poster le contenu de tes différents fichiers de logs Xorg.log et everything.log.

[GuilouV]

Déjà que ma carte wifi pose problème, si ma CG s'y met aussi...

Mon système est bien à jour. Voilà mon Xorg.log (le everything.log est beaucoup trop lourd) :

Code : Tout sélectionner

[    17.038] 
X.Org X Server 1.10.2
Release Date: 2011-05-28
[    17.038] X Protocol Version 11, Revision 0
[    17.038] Build Operating System: Linux 2.6.38-ARCH x86_64 
[    17.038] Current Operating System: Linux myhost 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011 x86_64
[    17.038] Kernel command line: root=/dev/sda1 ro i915.modeset=1
[    17.038] Build Date: 30 May 2011  08:18:15AM
[    17.038]  
[    17.038] Current version of pixman: 0.22.0
[    17.038] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    17.038] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.038] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 28 09:44:17 2011
[    17.146] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    17.223] (==) No Layout section.  Using the first Screen section.
[    17.223] (==) No screen section available. Using defaults.
[    17.223] (**) |-->Screen "Default Screen Section" (0)
[    17.223] (**) |   |-->Monitor "<default monitor>"
[    17.224] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    17.224] (==) Automatically adding devices
[    17.224] (==) Automatically enabling devices
[    17.301] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    17.301] 	Entry deleted from font path.
[    17.347] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    17.347] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.347] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.347] (II) Loader magic: 0x7d3440
[    17.347] (II) Module ABI versions:
[    17.347] 	X.Org ANSI C Emulation: 0.4
[    17.347] 	X.Org Video Driver: 10.0
[    17.347] 	X.Org XInput driver : 12.2
[    17.347] 	X.Org Server Extension : 5.0
[    17.348] (--) PCI:*(0:0:2:0) 8086:2a42:1179:ff40 rev 7, Mem @ 0xfd800000/4194304, 0xd0000000/268435456, I/O @ 0x0000a400/8
[    17.348] (--) PCI: (0:0:2:1) 8086:2a43:1179:ff40 rev 7, Mem @ 0xfdc00000/1048576
[    17.349] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    17.349] (II) LoadModule: "extmod"
[    17.372] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    17.395] (II) Module extmod: vendor="X.Org Foundation"
[    17.395] 	compiled for 1.10.2, module version = 1.0.0
[    17.395] 	Module class: X.Org Server Extension
[    17.395] 	ABI class: X.Org Server Extension, version 5.0
[    17.395] (II) Loading extension MIT-SCREEN-SAVER
[    17.395] (II) Loading extension XFree86-VidModeExtension
[    17.395] (II) Loading extension XFree86-DGA
[    17.395] (II) Loading extension DPMS
[    17.395] (II) Loading extension XVideo
[    17.395] (II) Loading extension XVideo-MotionCompensation
[    17.395] (II) Loading extension X-Resource
[    17.395] (II) LoadModule: "dbe"
[    17.401] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    17.438] (II) Module dbe: vendor="X.Org Foundation"
[    17.438] 	compiled for 1.10.2, module version = 1.0.0
[    17.438] 	Module class: X.Org Server Extension
[    17.438] 	ABI class: X.Org Server Extension, version 5.0
[    17.438] (II) Loading extension DOUBLE-BUFFER
[    17.438] (II) LoadModule: "glx"
[    17.438] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.507] (II) Module glx: vendor="X.Org Foundation"
[    17.507] 	compiled for 1.10.2, module version = 1.0.0
[    17.507] 	ABI class: X.Org Server Extension, version 5.0
[    17.507] (==) AIGLX enabled
[    17.507] (II) Loading extension GLX
[    17.507] (II) LoadModule: "record"
[    17.507] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    17.524] (II) Module record: vendor="X.Org Foundation"
[    17.524] 	compiled for 1.10.2, module version = 1.13.0
[    17.524] 	Module class: X.Org Server Extension
[    17.524] 	ABI class: X.Org Server Extension, version 5.0
[    17.524] (II) Loading extension RECORD
[    17.524] (II) LoadModule: "dri"
[    17.524] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    17.591] (II) Module dri: vendor="X.Org Foundation"
[    17.591] 	compiled for 1.10.2, module version = 1.0.0
[    17.591] 	ABI class: X.Org Server Extension, version 5.0
[    17.591] (II) Loading extension XFree86-DRI
[    17.591] (II) LoadModule: "dri2"
[    17.591] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.638] (II) Module dri2: vendor="X.Org Foundation"
[    17.638] 	compiled for 1.10.2, module version = 1.2.0
[    17.638] 	ABI class: X.Org Server Extension, version 5.0
[    17.638] (II) Loading extension DRI2
[    17.638] (==) Matched intel as autoconfigured driver 0
[    17.638] (==) Matched vesa as autoconfigured driver 1
[    17.639] (==) Matched fbdev as autoconfigured driver 2
[    17.639] (==) Assigned the driver to the xf86ConfigLayout
[    17.639] (II) LoadModule: "intel"
[    17.662] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.700] (II) Module intel: vendor="X.Org Foundation"
[    17.700] 	compiled for 1.10.2, module version = 2.15.0
[    17.700] 	Module class: X.Org Video Driver
[    17.700] 	ABI class: X.Org Video Driver, version 10.0
[    17.700] (II) LoadModule: "vesa"
[    17.750] (WW) Warning, couldn't open module vesa
[    17.750] (II) UnloadModule: "vesa"
[    17.750] (II) Unloading vesa
[    17.750] (EE) Failed to load module "vesa" (module does not exist, 0)
[    17.750] (II) LoadModule: "fbdev"
[    17.750] (WW) Warning, couldn't open module fbdev
[    17.750] (II) UnloadModule: "fbdev"
[    17.750] (II) Unloading fbdev
[    17.750] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    17.750] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    17.751] (++) using VT number 7

[    17.755] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.755] drmOpenDevice: node name is /dev/dri/card0
[    17.755] drmOpenDevice: open result is 8, (OK)
[    17.755] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    17.755] drmOpenDevice: node name is /dev/dri/card0
[    17.755] drmOpenDevice: open result is 8, (OK)
[    17.755] drmOpenByBusid: drmOpenMinor returns 8
[    17.755] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    17.755] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    17.755] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    17.755] (==) intel(0): RGB weight 888
[    17.755] (==) intel(0): Default visual is TrueColor
[    17.755] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    17.755] (--) intel(0): Chipset: "GM45"
[    17.755] (**) intel(0): Relaxed fencing enabled
[    17.755] (**) intel(0): Framebuffer tiled
[    17.755] (**) intel(0): Pixmaps tiled
[    17.755] (**) intel(0): 3D buffers tiled
[    17.755] (**) intel(0): SwapBuffers wait enabled
[    17.755] (==) intel(0): video overlay key set to 0x101fe
[    17.755] (II) intel(0): Output LVDS1 has no monitor section
[    17.755] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    17.773] (II) intel(0): Output VGA1 has no monitor section
[    17.793] (II) intel(0): Output HDMI1 has no monitor section
[    17.793] (II) intel(0): Output DP1 has no monitor section
[    17.856] (II) intel(0): Output HDMI2 has no monitor section
[    17.857] (II) intel(0): Output DP2 has no monitor section
[    17.857] (II) intel(0): Output DP3 has no monitor section
[    17.857] (II) intel(0): EDID for output LVDS1
[    17.857] (II) intel(0): Manufacturer: LCD  Model: 825  Serial#: 16843009
[    17.857] (II) intel(0): Year: 2009  Week: 46
[    17.857] (II) intel(0): EDID Version: 1.3
[    17.857] (II) intel(0): Digital Display Input
[    17.857] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 18
[    17.858] (II) intel(0): Gamma: 2.20
[    17.858] (II) intel(0): No DPMS capabilities specified
[    17.858] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.858] (II) intel(0): First detailed timing is preferred mode
[    17.858] (II) intel(0): redX: 0.580 redY: 0.330   greenX: 0.305 greenY: 0.540
[    17.858] (II) intel(0): blueX: 0.150 blueY: 0.150   whiteX: 0.313 whiteY: 0.329
[    17.858] (II) intel(0): Manufacturer's mask: 0
[    17.858] (II) intel(0): Supported standard timings:
[    17.858] (II) intel(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    17.858] (II) intel(0): Supported detailed timing:
[    17.858] (II) intel(0): clock: 71.0 MHz   Image Size:  287 x 180 mm
[    17.858] (II) intel(0): h_active: 1280  h_sync: 1312  h_sync_end 1344 h_blank_end 1444 h_border: 0
[    17.858] (II) intel(0): v_active: 800  v_sync: 802  v_sync_end 804 v_blanking: 820 v_border: 0
[    17.858] (II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 48 H max: 51 kHz, PixClock max 75 MHz
[    17.858] (II) intel(0): Monitor name: TMDISPLAY
[    17.858] (II) intel(0): Serial No: LT133DEVJK00
[    17.858] (II) intel(0): EDID (in hex):
[    17.858] (II) intel(0): 	00ffffffffffff003064250801010101
[    17.858] (II) intel(0): 	2e130103801d12780aa1a594544e8a26
[    17.858] (II) intel(0): 	26505400000081000101010101010101
[    17.858] (II) intel(0): 	010101010101bc1b00a4502014302020
[    17.858] (II) intel(0): 	22001fb410000018000000fd003b3d30
[    17.858] (II) intel(0): 	3307000a202020202020000000fc0054
[    17.858] (II) intel(0): 	4d444953504c41590a202020000000ff
[    17.858] (II) intel(0): 	004c543133334445564a4b30300a00e0
[    17.858] (II) intel(0): EDID vendor "LCD", prod id 2085
[    17.858] (II) intel(0): Using EDID range info for horizontal sync
[    17.858] (II) intel(0): Using EDID range info for vertical refresh
[    17.858] (II) intel(0): Printing DDC gathered Modelines:
[    17.858] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[    17.858] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[    17.858] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    17.858] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.858] (II) intel(0): Printing probed modes for output LVDS1
[    17.858] (II) intel(0): Modeline "1280x800"x60.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[    17.858] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    17.858] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    17.858] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    17.858] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    17.876] (II) intel(0): EDID for output VGA1
[    17.896] (II) intel(0): EDID for output HDMI1
[    17.896] (II) intel(0): EDID for output DP1
[    17.960] (II) intel(0): EDID for output HDMI2
[    17.961] (II) intel(0): EDID for output DP2
[    17.961] (II) intel(0): EDID for output DP3
[    17.961] (II) intel(0): Output LVDS1 connected
[    17.961] (II) intel(0): Output VGA1 disconnected
[    17.961] (II) intel(0): Output HDMI1 disconnected
[    17.961] (II) intel(0): Output DP1 disconnected
[    17.961] (II) intel(0): Output HDMI2 disconnected
[    17.961] (II) intel(0): Output DP2 disconnected
[    17.961] (II) intel(0): Output DP3 disconnected
[    17.961] (II) intel(0): Using exact sizes for initial modes
[    17.961] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    17.961] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.961] (II) intel(0): Kernel page flipping support detected, enabling
[    17.961] (**) intel(0): Display dimensions: (290, 180) mm
[    17.961] (**) intel(0): DPI set to (112, 112)
[    17.961] (II) Loading sub module "fb"
[    17.961] (II) LoadModule: "fb"
[    17.961] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.979] (II) Module fb: vendor="X.Org Foundation"
[    17.979] 	compiled for 1.10.2, module version = 1.0.0
[    17.979] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.979] (II) Loading sub module "dri2"
[    17.979] (II) LoadModule: "dri2"
[    17.980] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.980] (II) Module dri2: vendor="X.Org Foundation"
[    17.980] 	compiled for 1.10.2, module version = 1.2.0
[    17.980] 	ABI class: X.Org Server Extension, version 5.0
[    17.980] (==) Depth 24 pixmap format is 32 bpp
[    17.980] (II) intel(0): [DRI2] Setup complete
[    17.980] (II) intel(0): [DRI2]   DRI driver: i965
[    17.980] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[    18.083] (II) UXA(0): Driver registered support for the following operations:
[    18.083] (II)         solid
[    18.083] (II)         copy
[    18.083] (II)         composite (RENDER acceleration)
[    18.083] (II)         put_image
[    18.083] (II)         get_image
[    18.083] (==) intel(0): Backing store disabled
[    18.083] (==) intel(0): Silken mouse enabled
[    18.084] (II) intel(0): Initializing HW Cursor
[    18.106] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.120] (==) intel(0): DPMS enabled
[    18.120] (==) intel(0): Intel XvMC decoder enabled
[    18.120] (II) intel(0): Set up textured video
[    18.120] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    18.120] (II) intel(0): direct rendering: DRI2 Enabled
[    18.120] (==) intel(0): hotplug detection: "enabled"
[    18.120] (--) RandR disabled
[    18.120] (II) Initializing built-in extension Generic Event Extension
[    18.120] (II) Initializing built-in extension SHAPE
[    18.120] (II) Initializing built-in extension MIT-SHM
[    18.120] (II) Initializing built-in extension XInputExtension
[    18.120] (II) Initializing built-in extension XTEST
[    18.120] (II) Initializing built-in extension BIG-REQUESTS
[    18.120] (II) Initializing built-in extension SYNC
[    18.120] (II) Initializing built-in extension XKEYBOARD
[    18.120] (II) Initializing built-in extension XC-MISC
[    18.120] (II) Initializing built-in extension SECURITY
[    18.120] (II) Initializing built-in extension XINERAMA
[    18.120] (II) Initializing built-in extension XFIXES
[    18.120] (II) Initializing built-in extension RENDER
[    18.120] (II) Initializing built-in extension RANDR
[    18.120] (II) Initializing built-in extension COMPOSITE
[    18.120] (II) Initializing built-in extension DAMAGE
[    18.518] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    18.518] (II) AIGLX: enabled GLX_INTEL_swap_event
[    18.518] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    18.518] (II) AIGLX: enabled GLX_SGI_make_current_read
[    18.518] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    18.518] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[    18.518] (II) GLX: Initialized DRI2 GL provider for screen 0
[    18.519] (II) intel(0): Setting screen physical size to 338 x 211
[    19.635] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    19.635] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.635] (**) Power Button: Applying InputClass "Keyboard defaults"
[    19.635] (II) LoadModule: "evdev"
[    19.635] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.644] (II) Module evdev: vendor="X.Org Foundation"
[    19.644] 	compiled for 1.10.0, module version = 2.6.0
[    19.644] 	Module class: X.Org XInput Driver
[    19.644] 	ABI class: X.Org XInput driver, version 12.2
[    19.644] (II) Using input driver 'evdev' for 'Power Button'
[    19.644] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.644] (**) Power Button: always reports core events
[    19.644] (**) Power Button: Device: "/dev/input/event3"
[    19.653] (--) Power Button: Found keys
[    19.653] (II) Power Button: Configuring as keyboard
[    19.653] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    19.653] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    19.653] (**) Option "xkb_rules" "evdev"
[    19.653] (**) Option "xkb_model" "pc105"
[    19.653] (**) Option "xkb_layout" "fr"
[    19.653] (**) Option "xkb_options" "caps:shiftlock"
[    19.831] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    19.831] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.831] (**) Video Bus: Applying InputClass "Keyboard defaults"
[    19.831] (II) Using input driver 'evdev' for 'Video Bus'
[    19.831] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.831] (**) Video Bus: always reports core events
[    19.831] (**) Video Bus: Device: "/dev/input/event4"
[    19.843] (--) Video Bus: Found keys
[    19.843] (II) Video Bus: Configuring as keyboard
[    19.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4/event4"
[    19.843] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    19.843] (**) Option "xkb_rules" "evdev"
[    19.843] (**) Option "xkb_model" "pc105"
[    19.843] (**) Option "xkb_layout" "fr"
[    19.843] (**) Option "xkb_options" "caps:shiftlock"
[    19.846] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    19.846] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.846] (**) Power Button: Applying InputClass "Keyboard defaults"
[    19.846] (II) Using input driver 'evdev' for 'Power Button'
[    19.846] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.846] (**) Power Button: always reports core events
[    19.846] (**) Power Button: Device: "/dev/input/event2"
[    19.858] (--) Power Button: Found keys
[    19.858] (II) Power Button: Configuring as keyboard
[    19.858] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    19.858] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    19.858] (**) Option "xkb_rules" "evdev"
[    19.858] (**) Option "xkb_model" "pc105"
[    19.858] (**) Option "xkb_layout" "fr"
[    19.858] (**) Option "xkb_options" "caps:shiftlock"
[    19.859] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    19.859] (II) No input driver/identifier specified (ignoring)
[    19.863] (II) config/udev: Adding input device USB2.0 UVC WebCam (/dev/input/event7)
[    19.863] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    19.863] (**) USB2.0 UVC WebCam: Applying InputClass "Keyboard defaults"
[    19.863] (II) Using input driver 'evdev' for 'USB2.0 UVC WebCam'
[    19.863] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.863] (**) USB2.0 UVC WebCam: always reports core events
[    19.863] (**) USB2.0 UVC WebCam: Device: "/dev/input/event7"
[    19.900] (--) USB2.0 UVC WebCam: Found keys
[    19.900] (II) USB2.0 UVC WebCam: Configuring as keyboard
[    19.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input7/event7"
[    19.900] (II) XINPUT: Adding extended input device "USB2.0 UVC WebCam" (type: KEYBOARD)
[    19.900] (**) Option "xkb_rules" "evdev"
[    19.900] (**) Option "xkb_model" "pc105"
[    19.900] (**) Option "xkb_layout" "fr"
[    19.900] (**) Option "xkb_options" "caps:shiftlock"
[    19.900] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    19.900] (II) No input driver/identifier specified (ignoring)
[    19.901] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    19.901] (II) No input driver/identifier specified (ignoring)
[    19.901] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[    19.901] (II) No input driver/identifier specified (ignoring)
[    19.906] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    19.907] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.907] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard defaults"
[    19.907] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.907] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.907] (**) AT Translated Set 2 keyboard: always reports core events
[    19.907] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    19.940] (--) AT Translated Set 2 keyboard: Found keys
[    19.940] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    19.940] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    19.940] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    19.940] (**) Option "xkb_rules" "evdev"
[    19.940] (**) Option "xkb_model" "pc105"
[    19.940] (**) Option "xkb_layout" "fr"
[    19.940] (**) Option "xkb_options" "caps:shiftlock"
[    19.940] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event6)
[    19.940] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    19.940] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    19.940] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.940] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    19.941] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event6"
[    19.960] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[    19.960] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[    19.960] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[    19.960] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[    19.960] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[    19.960] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[    19.960] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[    19.960] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.960] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/event6"
[    19.960] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[    19.960] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[    19.960] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[    19.960] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[    19.960] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[    19.960] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[    19.960] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[    19.960] (II) No input driver/identifier specified (ignoring)
[    19.961] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    19.961] (II) No input driver/identifier specified (ignoring)
[    28.389] (II) intel(0): EDID vendor "LCD", prod id 2085
[    28.389] (II) intel(0): Using hsync ranges from config file
[    28.389] (II) intel(0): Using vrefresh ranges from config file
[    28.389] (II) intel(0): Printing DDC gathered Modelines:
[    28.389] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[    28.389] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[    28.491] (II) intel(0): EDID vendor "LCD", prod id 2085
[    28.491] (II) intel(0): Using hsync ranges from config file
[    28.491] (II) intel(0): Using vrefresh ranges from config file
[    28.491] (II) intel(0): Printing DDC gathered Modelines:
[    28.491] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[    28.491] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[  2028.041] (II) intel(0): EDID vendor "LCD", prod id 2085
[  2028.041] (II) intel(0): Using hsync ranges from config file
[  2028.041] (II) intel(0): Using vrefresh ranges from config file
[  2028.041] (II) intel(0): Printing DDC gathered Modelines:
[  2028.041] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[  2028.041] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[  2028.146] (II) intel(0): EDID vendor "LCD", prod id 2085
[  2028.146] (II) intel(0): Using hsync ranges from config file
[  2028.146] (II) intel(0): Using vrefresh ranges from config file
[  2028.146] (II) intel(0): Printing DDC gathered Modelines:
[  2028.146] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[  2028.146] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[  2054.378] (II) intel(0): EDID vendor "LCD", prod id 2085
[  2054.379] (II) intel(0): Using hsync ranges from config file
[  2054.379] (II) intel(0): Using vrefresh ranges from config file
[  2054.379] (II) intel(0): Printing DDC gathered Modelines:
[  2054.379] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[  2054.379] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[  2054.488] (II) intel(0): EDID vendor "LCD", prod id 2085
[  2054.488] (II) intel(0): Using hsync ranges from config file
[  2054.488] (II) intel(0): Using vrefresh ranges from config file
[  2054.488] (II) intel(0): Printing DDC gathered Modelines:
[  2054.488] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[  2054.488] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[  2055.920] (II) intel(0): EDID vendor "LCD", prod id 2085
[  2055.920] (II) intel(0): Using hsync ranges from config file
[  2055.920] (II) intel(0): Using vrefresh ranges from config file
[  2055.920] (II) intel(0): Printing DDC gathered Modelines:
[  2055.920] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[  2055.920] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[  2056.025] (II) intel(0): EDID vendor "LCD", prod id 2085
[  2056.025] (II) intel(0): Using hsync ranges from config file
[  2056.025] (II) intel(0): Using vrefresh ranges from config file
[  2056.025] (II) intel(0): Printing DDC gathered Modelines:
[  2056.025] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1312 1344 1444  800 802 804 820 -hsync -vsync (49.2 kHz)
[  2056.025] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)

[hansi]

Tout a l'air correct... Essayes peut-être de désactiver le DRI, c'est décrit dans le wiki ici
Sinon merci pour l'option caps:shiftlock, si c'est bien ce que je crois que c'est ma moman va être contente de retrouver son habitude windowsienne !

[GuilouV]

De rien pour l'option. Content de voir que l'échange se fait dans les deux sens.
Pour le DRI j'avais tenté de le désactiver aussi mais dans ce cas tout l'affichage est ralenti (mouvements de souris, apparition d'objets...)

[hansi]

Bon... ben ça s'annonce plutôt mal À ta place je testerais soit une autre version du pilote graphique xf86-video-intel (dans AUR il y en a plusieurs) soit carrément d'installer un DM complet histoire de voir si par hasard il n'apporterais pas un mieux mais bon...
Franchement une solution pragmatique ne serait pas de refus...

[FoolEcho]

Voir les dernières mises à jour avant ces problèmes ? Et effectivement rétrograder le pilote intel... voire même carrément xorg... même tester avec le pilote générique vesa... Tester un autre environnement ? (c'est-à-dire essayer d'isoler et reproduire, ou pas, le phénomène)
Au pif: un coup de KMS ? (peut-être essayer un chargement précoce, cf. wiki, plutôt que i915.modeset=1 )

[GuilouV]

Ouahou que de boulot FoolEcho ! Bon je crois que je vais "gérer" au mieux mon calme devant ces freezes parce que je n'ai pas vraiment ni le temps ni l'envie de tenter divers changements au coup par coup... (au mieux je tenterai peut être les pilotes vesa un jour mais c'est pas pour tout de suite)

Ceci dit j'utilise déjà le KMS (en modifiant le mkinitcpio) et les astuces du wiki (Shadow "True" et DRI "false") empirent les choses donc je n'y ai pas touché.

[GuilouV]

Il semblerait que la commande xset -dpms & ajoutées à mon .xinitrc résolve la problème.
En fait les solutions proposées sur https://wiki.ubuntu.com/X/Troubleshooting/Freeze n'éteignaient pas vraiment DPMS.

J'attends encore quelques temps de tests avant de passer en résolu... on sait jamais

EDIT : Bon apparemment il faudrait peut être que je trouve un moyen de lancer cette commande à chaque sortie de xscreensaver car le problème persiste. Une idée?

[GuilouV]

Il semblerait que cette commande limite mes freezes mais il y en a encore (et quand ça arrive c'est toujours agaçant). Cependant je n'arrive pas réellement à déterminer la cause du problème car ils apparaissent quelques temps après la sortie du screensaver ou bien quelques temps après lancement de firefox ou encore parfois simplement après le démarrage avec aucun de ces deux processus en action. Voilà qui est bien flou...

[GuilouV]

Ce souci semble en fait être le même qu'un autre problème que j'ai eu et qui a été résolu http://forums.archlinux.fr/topic10048.html.

Pour résumer les lag sont dû à ma carte graphique Intel i915 et au lancement du processus kworker qui surcharge alors le cpu.
La solution est de placer cette commande dans /etc/rc.local :

Code : Tout sélectionner

echo N >/sys/module/drm_kms_helper/parameters/poll