Archlinux.fr [Forums]

Bon j'ai essayé avec le makepkg mais j'ai un soucis avec lib32-libcups
Impossible de le trouvé avec pacman et pourtant multilib et activé comprend pas :/

Le dépôt est bien configuré selon http://wiki.archlinux.fr/Repos_archlinu ... A9p.C3.B4t ? Tu peux nous montrer ton /etc/pacman.conf ?

Salut, voici le pacman.conf

# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.

#[testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

[extra]
Include = /etc/pacman.d/mirrorlist

#[community-testing]
#Include = /etc/pacman.d/mirrorlist

[community]
Include = /etc/pacman.d/mirrorlist

[archlinuxfr]
Server = http://repo.archlinux.fr/$arch

# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.

#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist

#[multilib]
Include = /etc/pacman.d/mirrorlist

Donc à mon sens tout est bon, j'ai decommenté le multilib et arclinuxfr aussi (deja fait) puis j'ai fait une MAJ de la base puis du systeme pacman -Sy et -Syu
je comprend pas

Haulier a écrit :#[multilib]

Erreur commune: tu as un dièse, c'est un commentaire et donc le nom du dépôt n'est pas pris en compte.

Mon dieu j'ai honte le pire c'est que j'ai deja fait cette manip et que je les même pas vu tssss suis je nul.

PAr cntre j'ai un problème avec la licence :
==> Récupération des sources...
-> 6000_6010_rpm_1.01_20110222.zip trouvé
==> ERREUR: LICENSE n'a pas été trouvé dans le répertoire de travail et n'est pas une URL.
==> Removing installed dependencies...

LA license recupérer est un txt faut le renommer en LICENCE.txt nan ?

Haulier a écrit :LA licence recupérer est un txt faut le renommer en LICENCE.txt nan ?

LICENSE tout court (je l'inclue parce que ça fait partie des standards de paquetage, si ça doit finir sur Aur

) à mettre dans le même répertoire que le PKGBUILD.

... je pense que ça ne suffira pas pour la détection de l'imprimante (d'autant que le modèle colle pas), il faudra voir avec dmesg...

Bon sa y est j'ai compiler et relancer cups.
Au fait je te remercie pour ta patience et le temps passé pour moi foolecho. Merci

Je refait une recherche et .... sa marche toujours pas.
Alors je vous poste le résultat de dmesg avec imprimante branché :

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Aug 6 16:18:35 CEST 2011
[ 0.000000] Command line: root=/dev/disk/by-uuid/01fb896a-fe99-43c0-bfd7-a30f273db53e ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Acer Aspire 6920/Aspire 6920, BIOS V1.02 03/04/08
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6b90] f6b90
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ bfecb000-bfed0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13fffa000-140000000
[ 0.000000] RAMDISK: 37dd5000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6af0 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 00000000bfed2515 0008C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfedbbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfed3a39 08125 (v02 INTEL CRESTLNE 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bfedefc0 00040
[ 0.000000] ACPI: APIC 00000000bfedbcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000bfedbd2e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfedbd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 00000000bfedbda2 00032 (v01 Intel CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: TMOR 00000000bfedbdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 00000000bfedbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: SLIC 00000000bfedbe62 00176 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfed3744 002F5 (v01 SataRe SataAhci 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfed2b2d 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfed2a87 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfed25a1 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048159
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767752 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfedf000
[ 0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192 d23936 u1048576
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030234
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/01fb896a-fe99-43c0-bfd7-a30f273db53e ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4057160k/5242880k available (4062k kernel code, 1050244k absent, 135476k reserved, 3306k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2094.877 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.32 BogoMIPS (lpj=6982923)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003453] Security Framework initialized
[ 0.003459] AppArmor: AppArmor disabled by boot time parameter
[ 0.003817] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008928] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010106] Mount-cache hash table entries: 256
[ 0.010541] Initializing cgroup subsys cpuacct
[ 0.010575] Initializing cgroup subsys memory
[ 0.010594] Initializing cgroup subsys devices
[ 0.010596] Initializing cgroup subsys freezer
[ 0.010598] Initializing cgroup subsys net_cls
[ 0.010600] Initializing cgroup subsys blkio
[ 0.010657] CPU: Physical Processor ID: 0
[ 0.010659] CPU: Processor Core ID: 0
[ 0.010661] mce: CPU supports 6 MCE banks
[ 0.010670] CPU0: Thermal monitoring handled by SMI
[ 0.010674] using mwait in idle threads.
[ 0.011836] ACPI: Core revision 20110413
[ 0.016681] ftrace: allocating 16144 entries in 64 pages
[ 0.020398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054922] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073437] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100006] Booting Node 0, Processors #1 Ok.
[ 0.100009] smpboot cpu 1: start_ip = 9a000
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.196683] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203325] Brought up 2 CPUs
[ 0.203327] Total of 2 processors activated (8382.37 BogoMIPS).
[ 0.204801] devtmpfs: initialized
[ 0.204801] PM: Registering ACPI NVS region at bfed0000 (61440 bytes)
[ 0.207094] print_constraints: dummy:
[ 0.207179] NET: Registered protocol family 16
[ 0.207301] ACPI: bus type pci registered
[ 0.207460] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.207463] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.249027] PCI: Using configuration type 1 for base access
[ 0.249472] bio: create slab <bio-0> at 0
[ 0.251078] ACPI: EC: Look up EC in DSDT
[ 0.263326] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.274010] ACPI: SSDT 00000000bfed3402 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.274363] ACPI: Dynamic OEM Table Load:
[ 0.274366] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.274480] ACPI: SSDT 00000000bfed2d8c 005F1 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.274812] ACPI: Dynamic OEM Table Load:
[ 0.274815] ACPI: SSDT (null) 005F1 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.275008] ACPI: SSDT 00000000bfed367c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.275347] ACPI: Dynamic OEM Table Load:
[ 0.275350] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.275426] ACPI: SSDT 00000000bfed337d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.275758] ACPI: Dynamic OEM Table Load:
[ 0.275761] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.276695] ACPI: Interpreter enabled
[ 0.276699] ACPI: (supports S0 S3 S4 S5)
[ 0.276718] ACPI: Using IOAPIC for interrupt routing
[ 0.277449] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.281400] ACPI: Power Resource [FN00] (off)
[ 0.281748] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.281748] ACPI: No dock devices found.
[ 0.281748] HEST: Table not found.
[ 0.281748] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.281748] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.281748] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.281748] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.281748] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.281748] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.281748] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.281748] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.281748] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.281748] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.281748] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.281748] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.281748] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[ 0.281748] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.281748] pci 0000:00:01.0: PME# disabled
[ 0.281748] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.281748] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.281748] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.281748] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.283347] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.283372] pci 0000:00:1a.7: reg 10: [mem 0xfc304800-0xfc304bff]
[ 0.283467] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.283472] pci 0000:00:1a.7: PME# disabled
[ 0.283499] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.283522] pci 0000:00:1b.0: reg 10: [mem 0xfc300000-0xfc303fff 64bit]
[ 0.283606] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.283610] pci 0000:00:1b.0: PME# disabled
[ 0.283637] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.283722] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.283726] pci 0000:00:1c.0: PME# disabled
[ 0.283757] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.283842] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.283847] pci 0000:00:1c.1: PME# disabled
[ 0.283878] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.283962] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.283966] pci 0000:00:1c.2: PME# disabled
[ 0.283996] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.284082] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.284087] pci 0000:00:1c.3: PME# disabled
[ 0.284116] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.284201] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.284206] pci 0000:00:1c.4: PME# disabled
[ 0.284236] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.284291] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.284330] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.284386] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.284426] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.284494] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.284555] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.284578] pci 0000:00:1d.7: reg 10: [mem 0xfc304c00-0xfc304fff]
[ 0.284672] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.284677] pci 0000:00:1d.7: PME# disabled
[ 0.284699] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.284787] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.284895] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.284901] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.284906] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 0003)
[ 0.284910] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.284914] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0310 (mask 000f)
[ 0.284955] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.284971] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.284983] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.284995] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.285006] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.285019] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.285071] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.285098] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.285110] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.285122] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.285133] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.285145] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.285157] pci 0000:00:1f.2: reg 24: [mem 0xfc304000-0xfc3047ff]
[ 0.285204] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.285209] pci 0000:00:1f.2: PME# disabled
[ 0.285231] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.285247] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.285290] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.285376] pci 0000:01:00.0: [10de:0405] type 0 class 0x000300
[ 0.285396] pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
[ 0.285418] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.285440] pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
[ 0.285454] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.285468] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.285549] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.285552] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.285555] pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
[ 0.285560] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.285641] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
[ 0.285668] pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf603ffff 64bit]
[ 0.285683] pci 0000:02:00.0: reg 18: [io 0x3000-0x307f]
[ 0.285791] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.285796] pci 0000:02:00.0: PME# disabled
[ 0.285822] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.285835] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.285840] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.285845] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.285852] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.285915] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.285919] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.285924] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.285932] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.285992] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.285996] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.286000] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc1ffffff]
[ 0.286008] pci 0000:00:1c.2: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.286132] pci 0000:08:00.0: [8086:4229] type 0 class 0x000280
[ 0.286178] pci 0000:08:00.0: reg 10: [mem 0xbc000000-0xbc001fff 64bit]
[ 0.286343] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.286356] pci 0000:08:00.0: PME# disabled
[ 0.290024] pci 0000:00:1c.3: PCI bridge to [bus 08-09]
[ 0.290030] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.290034] pci 0000:00:1c.3: bridge window [mem 0xbc000000-0xbdffffff]
[ 0.290041] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
[ 0.290103] pci 0000:00:1c.4: PCI bridge to [bus 0a-0b]
[ 0.290107] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
[ 0.290112] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.290120] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.290203] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.290208] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.290213] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.290221] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.290224] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.290227] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.290229] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.290232] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.290234] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.290237] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.290239] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.290242] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.290244] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.290286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.290424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.290476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.290514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.290551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.290588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.290625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.290718] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.290721] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.290723] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.295213] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.295260] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.295309] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.295354] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.295399] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.295445] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.295492] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.295537] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.295638] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.295641] vgaarb: loaded
[ 0.295643] vgaarb: bridge control possible 0000:01:00.0
[ 0.295732] PCI: Using ACPI for IRQ routing
[ 0.306890] PCI: pci_cache_line_size set to 64 bytes
[ 0.306898] pci 0000:00:1c.3: no compatible bridge window for [mem 0xbc000000-0xbdffffff]
[ 0.306971] pci 0000:08:00.0: no compatible bridge window for [mem 0xbc000000-0xbc001fff 64bit]
[ 0.307040] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.307043] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.307171] NetLabel: Initializing
[ 0.307173] NetLabel: domain hash size = 128
[ 0.307175] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.307190] NetLabel: unlabeled traffic allowed by default
[ 0.307204] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.307209] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.307214] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.323331] Switching to clocksource hpet
[ 0.326539] Switched to NOHz mode on CPU #0
[ 0.326621] Switched to NOHz mode on CPU #1
[ 0.330433] pnp: PnP ACPI init
[ 0.330454] ACPI: bus type pnp registered
[ 0.330774] pnp 00:00: [bus 00-ff]
[ 0.330777] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.330779] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.330781] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.330784] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.330786] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.330788] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.330790] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.330792] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.330794] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.330796] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.330798] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.330800] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.330802] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.330804] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.330806] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.330808] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.330810] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.330813] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.330815] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.330817] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.330907] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.330981] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.330983] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.330985] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.330987] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.330989] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.330991] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.330993] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.330994] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.331064] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.331067] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.331070] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.331073] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.331076] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.331078] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.331081] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.331083] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.331087] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.331338] pnp 00:02: [io 0x0000-0x001f]
[ 0.331340] pnp 00:02: [io 0x0081-0x0091]
[ 0.331342] pnp 00:02: [io 0x0093-0x009f]
[ 0.331343] pnp 00:02: [io 0x00c0-0x00df]
[ 0.331345] pnp 00:02: [dma 4]
[ 0.331388] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.331398] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.331440] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.331508] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.331570] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.331573] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.331584] pnp 00:05: [io 0x00f0]
[ 0.331596] pnp 00:05: [irq 13]
[ 0.331640] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.331652] pnp 00:06: [io 0x002e-0x002f]
[ 0.331654] pnp 00:06: [io 0x0061]
[ 0.331659] pnp 00:06: [io 0x0063]
[ 0.331661] pnp 00:06: [io 0x0065]
[ 0.331662] pnp 00:06: [io 0x0067]
[ 0.331664] pnp 00:06: [io 0x0080]
[ 0.331666] pnp 00:06: [io 0x0092]
[ 0.331667] pnp 00:06: [io 0x0400-0x0401]
[ 0.331669] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.331671] pnp 00:06: [io 0x01f8-0x0273]
[ 0.331673] pnp 00:06: [io 0x0680-0x069f]
[ 0.331675] pnp 00:06: [io 0x0800-0x080f]
[ 0.331676] pnp 00:06: [io 0x1000-0x107f]
[ 0.331678] pnp 00:06: [io 0x1180-0x11bf]
[ 0.331680] pnp 00:06: [io 0x1640-0x164f]
[ 0.331682] pnp 00:06: [io 0xfe00]
[ 0.331761] system 00:06: [io 0x0400-0x0401] has been reserved
[ 0.331764] system 00:06: [io 0x01f8-0x0273] has been reserved
[ 0.331766] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.331769] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.331771] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.331774] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.331776] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.331779] system 00:06: [io 0xfe00] has been reserved
[ 0.331782] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.331791] pnp 00:07: [io 0x0070-0x0077]
[ 0.331797] pnp 00:07: [irq 8]
[ 0.331840] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.331888] pnp 00:08: [io 0x0310-0x0317]
[ 0.331894] pnp 00:08: [irq 6]
[ 0.331939] pnp 00:08: Plug and Play ACPI device, IDs ITE8708 (active)
[ 0.331960] pnp 00:09: [io 0x0060]
[ 0.331962] pnp 00:09: [io 0x0064]
[ 0.331967] pnp 00:09: [irq 1]
[ 0.332015] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.332028] pnp 00:0a: [irq 12]
[ 0.332083] pnp 00:0a: Plug and Play ACPI device, IDs SYN1b1a SYN1b00 SYN0002 PNP0f13 (active)
[ 0.332150] pnp: PnP ACPI: found 11 devices
[ 0.332152] ACPI: ACPI bus type pnp unregistered
[ 0.338485] PCI: max bus depth: 1 pci_try_num: 2
[ 0.338555] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc2000000-0xc20fffff]
[ 0.338560] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc2100000-0xc21000ff]
[ 0.338566] pci 0000:00:1f.3: BAR 0: set to [mem 0xc2100000-0xc21000ff] (PCI address [0xc2100000-0xc21000ff])
[ 0.338571] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.338573] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.338576] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.338580] pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
[ 0.338584] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.338589] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.338592] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.338598] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.338603] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.338611] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.338614] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.338620] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.338625] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.338633] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.338636] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.338642] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc1ffffff]
[ 0.338647] pci 0000:00:1c.2: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.338656] pci 0000:08:00.0: BAR 0: assigned [mem 0xc2000000-0xc2001fff 64bit]
[ 0.338690] pci 0000:08:00.0: BAR 0: set to [mem 0xc2000000-0xc2001fff 64bit] (PCI address [0xc2000000-0xc2001fff])
[ 0.338693] pci 0000:00:1c.3: PCI bridge to [bus 08-09]
[ 0.338696] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.338703] pci 0000:00:1c.3: bridge window [mem 0xc2000000-0xc20fffff]
[ 0.338708] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
[ 0.338716] pci 0000:00:1c.4: PCI bridge to [bus 0a-0b]
[ 0.338719] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
[ 0.338725] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.338730] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.338738] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 0.338740] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.338746] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.338750] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.338767] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.338772] pci 0000:00:01.0: setting latency timer to 64
[ 0.338780] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.338785] pci 0000:00:1c.0: setting latency timer to 64
[ 0.338792] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.338797] pci 0000:00:1c.1: setting latency timer to 64
[ 0.338805] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.338811] pci 0000:00:1c.2: setting latency timer to 64
[ 0.338819] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.338824] pci 0000:00:1c.3: setting latency timer to 64
[ 0.338831] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.338835] pci 0000:00:1c.4: setting latency timer to 64
[ 0.338843] pci 0000:00:1e.0: setting latency timer to 64
[ 0.338848] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.338850] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.338853] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.338855] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.338857] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.338859] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.338861] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.338864] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.338866] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.338868] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.338870] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff]
[ 0.338873] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.338876] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.338878] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.338880] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.338883] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.338885] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.338887] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.338890] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.338892] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc1ffffff]
[ 0.338894] pci_bus 0000:06: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.338897] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
[ 0.338899] pci_bus 0000:08: resource 1 [mem 0xc2000000-0xc20fffff]
[ 0.338901] pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
[ 0.338904] pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
[ 0.338906] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfc0fffff]
[ 0.338908] pci_bus 0000:0a: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.338910] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.338913] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 0.338915] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.338917] pci_bus 0000:0c: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.338919] pci_bus 0000:0c: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.338922] pci_bus 0000:0c: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.338924] pci_bus 0000:0c: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.338926] pci_bus 0000:0c: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.338928] pci_bus 0000:0c: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.339010] NET: Registered protocol family 2
[ 0.339215] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.340585] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.344946] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.345506] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.345509] TCP reno registered
[ 0.345526] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.345571] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.345893] NET: Registered protocol family 1
[ 0.346108] pci 0000:01:00.0: Boot video device
[ 0.346140] PCI: CLS 64 bytes, default 64
[ 0.346200] Unpacking initramfs...
[ 0.378835] Freeing initrd memory: 2156k freed
[ 0.379670] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.379674] Placing 64MB software IO TLB between ffff8800bbecb000 - ffff8800bfecb000
[ 0.379676] software IO TLB at phys 0xbbecb000 - 0xbfecb000
[ 0.379703] Simple Boot Flag at 0x36 set to 0x1
[ 0.380198] audit: initializing netlink socket (disabled)
[ 0.380212] type=2000 audit(1313485015.379:1): initialized
[ 0.392606] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.417451] VFS: Disk quotas dquot_6.5.2
[ 0.417606] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.417781] msgmni has been set to 7928
[ 0.418026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.418069] io scheduler noop registered
[ 0.418071] io scheduler deadline registered
[ 0.418122] io scheduler cfq registered (default)
[ 0.418243] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.418275] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.418328] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.418381] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.418463] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.418517] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.418596] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.418649] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.418728] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.418781] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.418863] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.418917] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[ 0.419085] intel_idle: MWAIT substates: 0x3122220
[ 0.419087] intel_idle: does not run on family 6 model 23
[ 0.419093] ERST: Table is not found!
[ 0.419158] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.573687] Linux agpgart interface v0.103
[ 0.573780] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.577387] i8042: Detected active multiplexing controller, rev 1.1
[ 0.579736] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.579768] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.579795] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.579819] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.579842] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.579927] mousedev: PS/2 mouse device common for all mice
[ 0.580014] rtc_cmos 00:07: RTC can wake from S4
[ 0.580131] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.580162] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.580172] cpuidle: using governor ladder
[ 0.580174] cpuidle: using governor menu
[ 0.580409] TCP cubic registered
[ 0.580412] NET: Registered protocol family 17
[ 0.580420] Registering the dns_resolver key type
[ 0.580514] PM: Hibernation image not present or could not be loaded.
[ 0.580519] registered taskstats version 1
[ 0.592528] rtc_cmos 00:07: setting system clock to 2011-08-16 08:56:55 UTC (1313485015)
[ 0.592570] Initializing network drop monitor service
[ 0.593992] Freeing unused kernel memory: 712k freed
[ 0.594168] Write protecting the kernel read-only data: 6144k
[ 0.594317] Freeing unused kernel memory: 16k freed
[ 0.597136] Freeing unused kernel memory: 776k freed
[ 0.607818] udevd[49]: starting version 173
[ 0.616094] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.635149] usbcore: registered new interface driver usbfs
[ 0.635183] usbcore: registered new interface driver hub
[ 0.650586] usbcore: registered new device driver usb
[ 0.655021] SCSI subsystem initialized
[ 0.666356] libata version 3.00 loaded.
[ 0.667067] ata_piix 0000:00:1f.1: version 2.13
[ 0.667085] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.667129] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.668846] scsi0 : ata_piix
[ 0.670108] scsi1 : ata_piix
[ 0.670524] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.670527] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.673708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.673747] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.673787] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.673792] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.673843] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.673886] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.684526] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.684556] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304800
[ 0.696778] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.696946] hub 1-0:1.0: USB hub found
[ 0.696951] hub 1-0:1.0: 4 ports detected
[ 0.697061] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.697090] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.697094] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.697104] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.697142] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.701027] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.701048] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304c00
[ 0.713362] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.713503] hub 2-0:1.0: USB hub found
[ 0.713508] hub 2-0:1.0: 6 ports detected
[ 0.744247] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.744305] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.744316] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.744320] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.744334] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.744406] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.744631] hub 3-0:1.0: USB hub found
[ 0.744637] hub 3-0:1.0: 2 ports detected
[ 0.744723] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.744730] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.744734] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.744742] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.744918] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.745988] hub 4-0:1.0: USB hub found
[ 0.745993] hub 4-0:1.0: 2 ports detected
[ 0.746086] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.746095] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.746098] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.746117] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.746150] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.746297] hub 5-0:1.0: USB hub found
[ 0.746302] hub 5-0:1.0: 2 ports detected
[ 0.746373] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.746380] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.746384] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.746393] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.746437] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.746561] hub 6-0:1.0: USB hub found
[ 0.746565] hub 6-0:1.0: 2 ports detected
[ 0.746636] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.746643] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.746647] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.746655] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.746709] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.746847] hub 7-0:1.0: USB hub found
[ 0.746852] hub 7-0:1.0: 2 ports detected
[ 0.835169] ata1.00: ATAPI: Optiarc BD ROM BC-5500A, 1.B4, max UDMA/33
[ 0.847057] ata1.00: configured for UDMA/33
[ 0.848514] scsi 0:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.B4 PQ: 0 ANSI: 5
[ 0.849544] ahci 0000:00:1f.2: version 3.0
[ 0.849562] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.849629] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.849697] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.849701] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.849707] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.850651] scsi2 : ahci
[ 0.850739] scsi3 : ahci
[ 0.851016] scsi4 : ahci
[ 0.851741] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 46
[ 0.851745] ata4: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 46
[ 0.851749] ata5: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304200 irq 46
[ 1.110029] usb 2-6: new high speed USB device number 2 using ehci_hcd
[ 1.170031] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.170068] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.170105] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.170582] ata3.00: unexpected _GTF length (8)
[ 1.220527] ata3.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.220530] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.221285] ata3.00: unexpected _GTF length (8)
[ 1.221488] ata3.00: configured for UDMA/133
[ 1.221668] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.224875] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.224879] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.225301] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.226197] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.226251] sd 2:0:0:0: [sda] Write Protect is off
[ 1.226254] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.226276] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.237085] sda: sda1 sda2 sda3 sda4
[ 1.237438] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.380022] Refined TSC clocksource calibration: 2094.749 MHz.
[ 1.380028] Switching to clocksource tsc
[ 1.503345] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 1.666931] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.860011] udevd[266]: starting version 173
[ 3.485509] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.485551] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.498993] wmi: Mapper loaded
[ 3.501937] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 3.501996] ACPI: Sleep Button [SLPB]
[ 3.502055] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 3.502141] ACPI: Lid Switch [LID]
[ 3.502188] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.502220] ACPI: Power Button [PWRB]
[ 3.502267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.502296] ACPI: Power Button [PWRF]
[ 3.503970] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.505942] ACPI: AC Adapter [ADP0] (on-line)
[ 3.541126] ACPI: Fan [FAN0] (off)
[ 3.541539] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.541545] ACPI: Battery Slot [BAT0] (battery absent)
[ 3.542020] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS
[ 3.543279] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.543282] ACPI: Thermal Zone [TZ00] (59 C)
[ 3.543402] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.543404] ACPI: Thermal Zone [TZVR] (62 C)
[ 3.543496] thermal LNXTHERM:02: registered as thermal_zone2
[ 3.543500] ACPI: Thermal Zone [TZVL] (63 C)
[ 3.543946] thermal LNXTHERM:03: registered as thermal_zone3
[ 3.543949] ACPI: Thermal Zone [TZ01] (48 C)
[ 3.560067] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[ 3.577376] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.580127] acpi device:04: registered as cooling_device1
[ 3.580195] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6
[ 3.580237] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no)
[ 3.580249] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 3.667029] ATL1E 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.667044] ATL1E 0000:02:00.0: setting latency timer to 64
[ 3.667491] ACPI: acpi_idle registered with cpuidle
[ 3.672482] Monitor-Mwait will be used to enter C-1 state
[ 3.677128] Monitor-Mwait will be used to enter C-2 state
[ 3.680502] Monitor-Mwait will be used to enter C-3 state
[ 3.680510] Marking TSC unstable due to TSC halts in idle
[ 3.680544] Switching to clocksource hpet
[ 3.772783] iTCO_vendor_support: vendor-support=0
[ 3.871894] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.871966] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 3.871998] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.915084] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 3.919403] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.921508] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 3.921747] acer_wmi: Brightness must be controlled by generic video driver
[ 3.940987] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 4.014367] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.014490] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 4.014570] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.015627] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[ 4.015629] ite_cir: Using model: ITE8708 CIR transceiver
[ 4.015648] ite_cir: TX-capable: 1
[ 4.015649] ite_cir: Sample period (ns): 8680
[ 4.015651] ite_cir: TX carrier frequency (Hz): 38000
[ 4.015652] ite_cir: TX duty cycle (%): 33
[ 4.015654] ite_cir: RX low carrier frequency (Hz): 0
[ 4.015655] ite_cir: RX high carrier frequency (Hz): 0
[ 4.036549] IR NEC protocol handler initialized
[ 4.151266] [drm] Initialized drm 1.1.0 20060810
[ 4.154917] cfg80211: Calling CRDA to update world regulatory domain
[ 4.181112] IR RC5(x) protocol handler initialized
[ 4.219582] Linux media interface: v0.10
[ 4.222483] Linux video capture interface: v2.00
[ 4.225167] IR RC6 protocol handler initialized
[ 4.246710] Registered IR keymap rc-rc6-mce
[ 4.246863] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input9
[ 4.246962] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[ 4.246986] ite_cir: driver has been successfully loaded
[ 4.275386] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000/0x0
[ 4.277188] IR JVC protocol handler initialized
[ 4.310185] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 4.325410] IR Sony protocol handler initialized
[ 4.352223] lirc_dev: IR Remote Control driver registered, major 251
[ 4.360975] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[ 4.360978] IR LIRC bridge handler initialized
[ 4.363029] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[ 4.379504] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input11
[ 4.379573] usbcore: registered new interface driver uvcvideo
[ 4.379575] USB Video Class driver (v1.1.0)
[ 4.446938] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 4.446941] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 4.447043] iwl4965 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.447075] iwl4965 0000:08:00.0: setting latency timer to 64
[ 4.447146] iwl4965 0000:08:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 4.489734] iwl4965 0000:08:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 4.489748] iwl4965 0000:08:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 4.489850] iwl4965 0000:08:00.0: irq 48 for MSI/MSI-X
[ 4.547620] MXM: GUID detected in BIOS
[ 4.547675] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.547683] nouveau 0000:01:00.0: setting latency timer to 64
[ 4.549907] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084500a2)
[ 4.557062] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 4.646250] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 4.646255] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 4.646258] [drm] nouveau 0000:01:00.0: Bios version 60.84.69.00
[ 4.646261] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 4.646264] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 4.646267] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 4.646270] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011312 00020010
[ 4.646272] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02033300 00000028
[ 4.646275] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[ 4.646278] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[ 4.646281] [drm] nouveau 0000:01:00.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07
[ 4.646283] [drm] nouveau 0000:01:00.0: 2: 0x00002231: type 0x31 idx 2 tag 0x08
[ 4.646286] [drm] nouveau 0000:01:00.0: 3: 0x00000300: type 0x00 idx 3 tag 0xff
[ 4.646289] [drm] nouveau 0000:01:00.0: 4: 0x00000410: type 0x10 idx 4 tag 0xff
[ 4.646291] [drm] nouveau 0000:01:00.0: 5: 0x00000411: type 0x11 idx 5 tag 0xff
[ 4.646294] [drm] nouveau 0000:01:00.0: 6: 0x00000413: type 0x13 idx 6 tag 0xff
[ 4.646296] [drm] nouveau 0000:01:00.0: 7: 0x00000531: type 0x31 idx 7 tag 0xff
[ 4.646299] [drm] nouveau 0000:01:00.0: 8: 0x00001631: type 0x31 idx 8 tag 0x07
[ 4.646301] [drm] nouveau 0000:01:00.0: 9: 0x00002731: type 0x31 idx 9 tag 0x08
[ 4.646304] [drm] nouveau 0000:01:00.0: 10: 0x00000800: type 0x00 idx 10 tag 0xff
[ 4.646306] [drm] nouveau 0000:01:00.0: 11: 0x00000910: type 0x10 idx 11 tag 0xff
[ 4.646309] [drm] nouveau 0000:01:00.0: 12: 0x00000911: type 0x11 idx 12 tag 0xff
[ 4.646312] [drm] nouveau 0000:01:00.0: 13: 0x00000913: type 0x13 idx 13 tag 0xff
[ 4.646317] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE2D
[ 4.666812] iwl4965 0000:08:00.0: loaded firmware version 228.61.2.24

Suite :

[ 4.666988] Registered led device: phy0-led
[ 4.669551] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD1A4
[ 4.685909] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDDE8
[ 4.685917] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDEDA
[ 4.687002] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE10D
[ 4.687005] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE172
[ 4.697323] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 4.707016] [drm] nouveau 0000:01:00.0: 0xE172: Condition still not met after 20ms, skipping following opcodes
[ 4.726119] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 4.726125] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 1150mV fanspeed 100% timing 0
[ 4.726129] [drm] nouveau 0000:01:00.0: 1: memory 200MHz core 275MHz shader 550MHz voltage 1150mV fanspeed 100% timing 1
[ 4.726133] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 475MHz shader 950MHz voltage 1200mV fanspeed 100% timing 2
[ 4.726152] [drm] nouveau 0000:01:00.0: c: memory 199MHz core 275MHz shader 550MHz voltage 1150mV
[ 4.726239] [TTM] Zone kernel: Available graphics memory: 2030410 kiB.
[ 4.726241] [TTM] Initializing pool allocator.
[ 4.726260] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 4.726267] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 4.729006] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.763992] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 4.765096] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.765098] [drm] No driver support for vblank timestamp query.
[ 4.933623] [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40000000, bo ffff880136ce0800
[ 4.933704] fbcon: nouveaufb (fb0) is primary device
[ 5.964619] Console: switching to colour frame buffer device 170x48
[ 5.966547] fb0: nouveaufb frame buffer device
[ 5.966549] drm: registered panic notifier
[ 5.966555] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 10.216012] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.399453] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 10.497882] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
[ 12.913306] NET: Registered protocol family 10
[ 12.956090] NET: Registered protocol family 4
[ 12.958652] NET: Registered protocol family 5
[ 13.931773] ATL1E 0000:02:00.0: irq 49 for MSI/MSI-X
[ 13.932301] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.220130] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.276513] wlan0: authenticate with 00:19:70:6c:b9:9d (try 1)
[ 20.279087] wlan0: authenticated
[ 20.297889] wlan0: associate with 00:19:70:6c:b9:9d (try 1)
[ 20.302369] wlan0: RX AssocResp from 00:19:70:6c:b9:9d (capab=0x431 status=0 aid=1)
[ 20.302375] wlan0: associated
[ 20.353887] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.587492] padlock_aes: VIA PadLock not detected.
[ 21.635989] Intel AES-NI instructions are not detected.
[ 32.470104] wlan0: no IPv6 routers present
[ 65.306202] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 65.558146] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 93.856747] usb 2-2: new high speed USB device number 3 using ehci_hcd
[ 94.304987] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x413C pid 0x5404
[ 94.305032] usbcore: registered new interface driver usblp
[ 109.799241] iwl4965 0000:08:00.0: Aggregation not enabled for tid 0 because load = 1
[ 113.443359] iwl4965 0000:08:00.0: iwl4965_tx_agg_start on ra = 00:19:70:6c:b9:9d tid = 0
[ 127.802910] usb 2-2: USB disconnect, device number 3
[ 127.803115] usblp0: removed
[ 128.956713] usb 2-3: new high speed USB device number 4 using ehci_hcd
[ 131.115791] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x413C pid 0x5404
[ 252.642447] usb 2-3: USB disconnect, device number 4
[ 252.642648] usblp0: removed
[ 370.316718] usb 2-2: new high speed USB device number 5 using ehci_hcd
[ 370.445612] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x413C pid 0x5404

Bon l'imprimante est bien détectée... mais quand tu ajoutes l'imprimante, il n'a vraiment pas d'entrée usb pour une imprimante en local ? Là, c'est fâcheux... (et je ne sais pas comment ça marche à ce niveau).

Il faudrait que tu ajoutes une imprimante en nous montrant les logs (tu enlèves toute configuration des imprimantes pour qu'on puisse mieux lire aussi)... mais à part un problème de droit, je ne vois pas. Fais un lsusb puis communique-nous la sortie de "ls -l /dev/bus/usb/XXX/YYY" (XXX désignant le numéro de bus que tu récupères avec lsusb et YYY pour le périphérique).

Bonjour, reprise du travail alors je vais rep moins souvent.

Alors J'ai effacer toute imprimantes de cups.
(je branche l'imprimante) puis lsusb

Code : Tout sélectionner

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314]
Bus 004 Device 002: ID 138a:0001 Validity Sensors, Inc. VFS101 Fingeprint Reader
Bus 007 Device 002: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller
Bus 002 Device 004: ID 413c:5404 Dell Computer Corp.

Puis la commande ls -l /dev/bus/usb/......

Code : Tout sélectionner

ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 16 août  23:12 /dev/bus/usb/002/004

mais quand tu ajoutes l'imprimante, il n'a vraiment pas d'entrée usb pour une imprimante en local ?

Affirmatif aucune detection et l'imprimante est en local en direct sur mon usb

Il manque les logs de cups, aussi.
Mais là, je suis à court d'idées...

Bon voici les log avant que j'ajoute une imprimante.

Code : Tout sélectionner

D [17/Aug/2011:11:50:09 +0200] cupsdSetBusyState: Not busy
D [17/Aug/2011:11:50:09 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [17/Aug/2011:11:50:09 +0200] cupsdCloseClient: 12
D [17/Aug/2011:11:51:09 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [17/Aug/2011:11:51:09 +0200] Report: clients=1
D [17/Aug/2011:11:51:09 +0200] Report: jobs=0
D [17/Aug/2011:11:51:09 +0200] Report: jobs-active=0
D [17/Aug/2011:11:51:09 +0200] Report: printers=0
D [17/Aug/2011:11:51:09 +0200] Report: printers-implicit=0
D [17/Aug/2011:11:51:09 +0200] Report: stringpool-string-count=125
D [17/Aug/2011:11:51:09 +0200] Report: stringpool-alloc-bytes=3976
D [17/Aug/2011:11:51:09 +0200] Report: stringpool-total-bytes=3024
D [17/Aug/2011:11:51:09 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [17/Aug/2011:11:51:09 +0200] cupsdSetBusyState: Active clients
D [17/Aug/2011:11:51:09 +0200] cupsdAuthorize: No authentication data provided.
D [17/Aug/2011:11:51:09 +0200] cupsdReadClient: 12 1.1 Get-Notifications 1
D [17/Aug/2011:11:51:09 +0200] Get-Notifications /
D [17/Aug/2011:11:51:09 +0200] cupsdIsAuthorized: requesting-user-name="haulier"
D [17/Aug/2011:11:51:09 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [17/Aug/2011:11:51:09 +0200] cupsdSetBusyState: Not busy
D [17/Aug/2011:11:51:09 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [17/Aug/2011:11:51:09 +0200] cupsdCloseClient: 12
D [17/Aug/2011:11:52:04 +0200] cupsdAcceptClient: 12 from localhost:631 (IPv4)
D [17/Aug/2011:11:52:04 +0200] cupsdReadClient: 12 GET /admin HTTP/1.1
D [17/Aug/2011:11:52:04 +0200] cupsdSetBusyState: Active clients
D [17/Aug/2011:11:52:04 +0200] cupsdAuthorize: No authentication data provided.
D [17/Aug/2011:11:52:04 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@myhost"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"                                                                                                                    
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[13] = "USER=root"                                                                                                                                     
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"                                                                                                           
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"                                                                                                                   
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[16] = "IPP_PORT=631"                                                                                                                                  
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[17] = "LANG=fr.UTF8"                                                                                                                                  
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"                                                                                                                             
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[21] = "SERVER_PORT=631"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[22] = "REMOTE_ADDR=127.0.0.1"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[24] = "SCRIPT_NAME=/admin"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[27] = "HTTP_COOKIE=org.cups.sid=afee1a435fb0635ce868142603b8faac"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[28] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[29] = "HTTP_REFERER=http://localhost:631/admin/"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[30] = "REQUEST_METHOD=GET"
D [17/Aug/2011:11:52:04 +0200] [CGI] envp[31] = "QUERY_STRING="
D [17/Aug/2011:11:52:04 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 3967)
I [17/Aug/2011:11:52:04 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=3967)
D [17/Aug/2011:11:52:04 +0200] cupsdSendCommand: 12 file=14
D [17/Aug/2011:11:52:04 +0200] [CGI] admin.cgi started...
D [17/Aug/2011:11:52:04 +0200] cupsdAcceptClient: 15 from localhost (Domain)
D [17/Aug/2011:11:52:04 +0200] [CGI] http=0x7f4dd8cfc5e0
D [17/Aug/2011:11:52:04 +0200] [CGI] org.cups.sid cookie is "afee1a435fb0635ce868142603b8faac"
D [17/Aug/2011:11:52:04 +0200] [CGI] No form data, showing main menu...
D [17/Aug/2011:11:52:04 +0200] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [17/Aug/2011:11:52:04 +0200] cupsdReadClient: 15 POST / HTTP/1.1
D [17/Aug/2011:11:52:04 +0200] cupsdAuthorize: No authentication data provided.
D [17/Aug/2011:11:52:04 +0200] cupsdReadClient: 15 1.1 Get-Subscriptions 1
D [17/Aug/2011:11:52:04 +0200] Get-Subscriptions ipp://localhost/
D [17/Aug/2011:11:52:04 +0200] Returning IPP successful-ok for Get-Subscriptions (ipp://localhost/) from localhost
D [17/Aug/2011:11:52:04 +0200] Script header: Content-Type: text/html;charset=utf-8
D [17/Aug/2011:11:52:04 +0200] Script header: 
D [17/Aug/2011:11:52:04 +0200] PID 3967 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [17/Aug/2011:11:52:04 +0200] cupsdReadClient: 15 WAITING Closing on EOF
D [17/Aug/2011:11:52:04 +0200] cupsdCloseClient: 15
D [17/Aug/2011:11:52:04 +0200] cupsdSetBusyState: Not busy
D [17/Aug/2011:11:52:09 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [17/Aug/2011:11:52:09 +0200] Report: clients=2
D [17/Aug/2011:11:52:09 +0200] Report: jobs=0
D [17/Aug/2011:11:52:09 +0200] Report: jobs-active=0
D [17/Aug/2011:11:52:09 +0200] Report: printers=0
D [17/Aug/2011:11:52:09 +0200] Report: printers-implicit=0
D [17/Aug/2011:11:52:09 +0200] Report: stringpool-string-count=125
D [17/Aug/2011:11:52:09 +0200] Report: stringpool-alloc-bytes=3976
D [17/Aug/2011:11:52:09 +0200] Report: stringpool-total-bytes=3024
D [17/Aug/2011:11:52:09 +0200] cupsdReadClient: 14 POST / HTTP/1.1
D [17/Aug/2011:11:52:09 +0200] cupsdSetBusyState: Active clients
D [17/Aug/2011:11:52:09 +0200] cupsdAuthorize: No authentication data provided.
D [17/Aug/2011:11:52:09 +0200] cupsdReadClient: 14 1.1 Get-Notifications 1
D [17/Aug/2011:11:52:09 +0200] Get-Notifications /
D [17/Aug/2011:11:52:09 +0200] cupsdIsAuthorized: requesting-user-name="haulier"
D [17/Aug/2011:11:52:09 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [17/Aug/2011:11:52:09 +0200] cupsdSetBusyState: Not busy
D [17/Aug/2011:11:52:09 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [17/Aug/2011:11:52:09 +0200] cupsdCloseClient: 14
D [17/Aug/2011:11:52:34 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [17/Aug/2011:11:52:34 +0200] cupsdCloseClient: 12

MAintenant j'ajoute une nouvelle imprimante (Attention plein de screen en vue lol)

Et la j'ajoute le fichier pdd recuperer pour la xerox phaser 6000B

Voila impriante ajouté. Je pense que la démarche est bonne.

Dans la démarche c'est ça, sauf que cups ne te propose pas ton imprimante en local via usb... donc ton "usb://" tout court, c'est certain que ça ne marche pas.
Mais je ne sais pas pourquoi il ne te le propose pas...

... et les logs de cups quand tu fais ces étapes ?

Peut-être essayer en blacklistant le module usblp (cf. wiki de cups) ?

Alors quoi mettre à la place de usb:// ?

J'ai meme essayé de brancher l'imprimante su le modem (celui-ci la detect) mais toujours pas trouve avec cups.
Voila le log une fois une impression lancer et imprimante connecté :

Code : Tout sélectionner

[haulier@myhost ~]$ tail -n 100 -f /var/log/cups/error_log
D [17/Aug/2011:20:41:38 +0200] cupsdSetBusyState: Printing jobs and dirty files
D [17/Aug/2011:20:41:38 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [17/Aug/2011:20:41:38 +0200] cupsdCloseClient: 14
I [17/Aug/2011:20:41:38 +0200] [Job 21] Start rendering...
I [17/Aug/2011:20:41:38 +0200] [Job 21] Processing page 1...
D [17/Aug/2011:20:41:38 +0200] cupsdMarkDirty(-----S)
D [17/Aug/2011:20:41:38 +0200] cupsdMarkDirty(-----S)
D [17/Aug/2011:20:41:38 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [17/Aug/2011:20:41:38 +0200] cupsdReadClient: 14 POST / HTTP/1.1
D [17/Aug/2011:20:41:38 +0200] cupsdSetBusyState: Active clients, printing jobs, and dirty files
D [17/Aug/2011:20:41:38 +0200] cupsdAuthorize: No authentication data provided.
D [17/Aug/2011:20:41:38 +0200] cupsdReadClient: 14 1.1 Get-Notifications 1
D [17/Aug/2011:20:41:38 +0200] Get-Notifications /
D [17/Aug/2011:20:41:38 +0200] cupsdIsAuthorized: requesting-user-name="haulier"
D [17/Aug/2011:20:41:38 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [17/Aug/2011:20:41:38 +0200] cupsdSetBusyState: Printing jobs and dirty files
D [17/Aug/2011:20:41:38 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [17/Aug/2011:20:41:38 +0200] cupsdCloseClient: 14
D [17/Aug/2011:20:41:38 +0200] PID 1671 (/usr/lib/cups/filter/gstoraster) stopped with status 13!
D [17/Aug/2011:20:42:07 +0200] cupsdAcceptClient: 14 from localhost (Domain)
I [17/Aug/2011:20:42:07 +0200] Saving job cache file "/var/cache/cups/job.cache"...
I [17/Aug/2011:20:42:07 +0200] Saving subscriptions.conf...
D [17/Aug/2011:20:42:07 +0200] cupsdSetBusyState: Printing jobs
D [17/Aug/2011:20:42:07 +0200] cupsdReadClient: 14 POST / HTTP/1.1
D [17/Aug/2011:20:42:07 +0200] cupsdSetBusyState: Active clients and printing jobs
D [17/Aug/2011:20:42:07 +0200] cupsdAuthorize: No authentication data provided.
D [17/Aug/2011:20:42:07 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [17/Aug/2011:20:42:07 +0200] CUPS-Get-Devices
D [17/Aug/2011:20:42:07 +0200] cupsdIsAuthorized: username=""
D [17/Aug/2011:20:42:07 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [17/Aug/2011:20:42:07 +0200] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [17/Aug/2011:20:42:07 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [17/Aug/2011:20:42:07 +0200] cupsdCloseClient: 14
D [17/Aug/2011:20:42:07 +0200] cupsdSetBusyState: Printing jobs
D [17/Aug/2011:20:42:07 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [17/Aug/2011:20:42:07 +0200] cupsdAcceptClient: 17 from localhost (Domain)
D [17/Aug/2011:20:42:07 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [17/Aug/2011:20:42:07 +0200] cupsdCloseClient: 14
D [17/Aug/2011:20:42:07 +0200] cupsdReadClient: 17 POST / HTTP/1.1
D [17/Aug/2011:20:42:07 +0200] cupsdSetBusyState: Active clients and printing jobs                                                                                                              
D [17/Aug/2011:20:42:07 +0200] cupsdAuthorize: Authorized as root using PeerCred                                                                                                                
D [17/Aug/2011:20:42:07 +0200] cupsdReadClient: 17 1.1 CUPS-Get-Devices 1                                                                                                                       
D [17/Aug/2011:20:42:07 +0200] CUPS-Get-Devices                                                                                                                                                 
D [17/Aug/2011:20:42:07 +0200] cupsdIsAuthorized: username="root"                                                                                                                               
D [17/Aug/2011:20:42:07 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"                                                                                                              
D [17/Aug/2011:20:42:07 +0200] [CGI] argv[1] = "1"                                                                                                                                              
D [17/Aug/2011:20:42:07 +0200] [CGI] argv[2] = "0"
D [17/Aug/2011:20:42:07 +0200] [CGI] argv[3] = "2"
D [17/Aug/2011:20:42:07 +0200] [CGI] argv[4] = "2"
D [17/Aug/2011:20:42:07 +0200] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@myhost"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[13] = "USER=root"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[18] = "LANG=en_US.UTF8"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[23] = "REMOTE_ADDR="
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.8"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [17/Aug/2011:20:42:07 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [17/Aug/2011:20:42:07 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1691)
I [17/Aug/2011:20:42:07 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1691)
D [17/Aug/2011:20:42:07 +0200] cupsdSendCommand: 17 file=14
D [17/Aug/2011:20:42:07 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1692)
D [17/Aug/2011:20:42:07 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1693)
D [17/Aug/2011:20:42:07 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1694)
D [17/Aug/2011:20:42:07 +0200] [cups-deviced] PID 1692 (mdns) exited with no errors.
D [17/Aug/2011:20:42:07 +0200] [cups-deviced] PID 1693 (serial) exited with no errors.
E [17/Aug/2011:20:42:07 +0200] [cups-deviced] Bad line from "usb": direct usb://Dell/1250c%20Color%20Printer "Dell 1250c Color Printer" "Dell 1250c Color Printer" "MFG:Dell;CMD:PJL,RASTER,DOWNLOAD,HBPL;MDL:1250c Color Printer;DES:Dell 1250c Color Printer;CLS:PRINTER;STS:AAAWAQD/AP8AAAAAAAIAAWQDZANkA2QDAAAAAGQDQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAD/
E [17/Aug/2011:20:42:07 +0200] [cups-deviced] Bad line from "usb": /w==;" ""
D [17/Aug/2011:20:42:07 +0200] [cups-deviced] PID 1694 (usb) exited with no errors.
D [17/Aug/2011:20:42:07 +0200] Script header: Content-Type: application/ipp
D [17/Aug/2011:20:42:07 +0200] Script header: 
D [17/Aug/2011:20:42:07 +0200] PID 1691 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [17/Aug/2011:20:42:07 +0200] cupsdSetBusyState: Printing jobs
D [17/Aug/2011:20:42:07 +0200] cupsdReadClient: 17 WAITING Closing on EOF
D [17/Aug/2011:20:42:07 +0200] cupsdCloseClient: 17
D [17/Aug/2011:20:42:25 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [17/Aug/2011:20:42:25 +0200] Report: clients=2
D [17/Aug/2011:20:42:25 +0200] Report: jobs=1
D [17/Aug/2011:20:42:25 +0200] Report: jobs-active=1
D [17/Aug/2011:20:42:25 +0200] Report: printers=1
D [17/Aug/2011:20:42:25 +0200] Report: printers-implicit=0
D [17/Aug/2011:20:42:25 +0200] Report: stringpool-string-count=2809
D [17/Aug/2011:20:42:25 +0200] Report: stringpool-alloc-bytes=10408
D [17/Aug/2011:20:42:25 +0200] Report: stringpool-total-bytes=56632
D [17/Aug/2011:20:42:25 +0200] cupsdReadClient: 14 POST / HTTP/1.1
D [17/Aug/2011:20:42:25 +0200] cupsdSetBusyState: Active clients and printing jobs
D [17/Aug/2011:20:42:25 +0200] cupsdAuthorize: No authentication data provided.
D [17/Aug/2011:20:42:25 +0200] cupsdReadClient: 14 1.1 Get-Notifications 1
D [17/Aug/2011:20:42:25 +0200] Get-Notifications /
D [17/Aug/2011:20:42:25 +0200] cupsdIsAuthorized: requesting-user-name="haulier"
D [17/Aug/2011:20:42:25 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [17/Aug/2011:20:42:25 +0200] cupsdSetBusyState: Printing jobs
D [17/Aug/2011:20:42:25 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [17/Aug/2011:20:42:25 +0200] cupsdCloseClient: 14

Haulier a écrit :E [17/Aug/2011:20:42:07 +0200] [cups-deviced] Bad line from "usb": direct usb://Dell/1250c%20Color%20Printer "Dell 1250c Color Printer" "Dell 1250c Color Printer" "MFG:Dell;CMD:PJL,RASTER,DOWNLOAD,HBPL;MDL:1250c Color Printer;DES:Dell 1250c Color Printer;CLS:PRINTER;STS:AAAWAQD/AP8AAAAAAAIAAWQDZANkA2QDAAAAAGQDQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAD/
E [17/Aug/2011:20:42:07 +0200] [cups-deviced] Bad line from "usb": /w==;" ""

C'est ça qui ne va pas, qui fait que ça n'apparaît pas dans cups !

C'est un bon point de pris déjà, mais je ne sais pas comment y rémédier... faudrait chercher un peu autour de ça...

Haulier a écrit :Alors quoi mettre à la place de usb:// ?

Du coup, sans grand espoir mais bon (c'est peut-être «juste» cups qui n'arrive pas à aller au bout de la détection), tu peux essayer d'ajouter ton imprimante avec:

Code : Tout sélectionner

usb://Dell/1250c%20Color%20Printer

et reprendre la configuration.

Tu es avec cups-usblp ? Si ça ne marche pas, une fois n'est pas coutume, ça pourrait valoir le coup de repasser sur cups et de tester en blacklistant le module usblp (j'pense pas que ça serve à grand-chose non plus, il va falloir chercher autour de l'erreur).

Bonjour alors j'ai remplacé usb:// par usb://Dell/1250c%20Color%20Printer mais aucun changement.

En revanche je ne sais pas si sa sera utile mais dans l'état de l'imprimante je peut voir sa :
stopped
"/usr/lib/cups/filter/Xerox_Phaser_6000_6010/XRM_MF failed"

Je ne sais pas si en fouillant dans le fichier j'arriverai a trouvé quelque chose

Bon, apparemment, ça rejoint cette histoire: http://forums.opensuse.org/english/get- ... ted-2.html (et ils ont pu s'en sortir... et je pense que tu es à peu près au même point maintenant...)

Après avoir modifié le pilote, tu as essayé d'envoyer des commandes à l'imprimante ? (page de test / éventuellement nettoyage + logs toujours...)

FoolEcho a écrit :Après avoir modifié le pilote, tu as essayé d'envoyer des commandes à l'imprimante ? (page de test / éventuellement nettoyage + logs toujours...)

Réponse OUI

Je vais jeter un oeil a la page

EDIT : Et si je rajoute leur script dans le fichier suivant /etc/cups/printers.conf
comme il le precise tu pense que sa changera quelque chose ?

EDIT 2 : Ha bas en fait se fichier existe deja legerement différent du a la différence d'imprimante mais sa semble correct.

Utilise la balise quote quand tu cites, sinon ça fait bizarre.

Le bug a été relevé (évidemment pour une vraie xerox, mais on s'en fiche un peu): http://www.cups.org/newsgroups.php?s17+ ... haser+6010 (dans la foulée du lieu avec opensuse)
Il faudrait voir avec les solutions qui y sont proposées, notamment en ligne de commande avec lpadmin.

Archlinux.fr [Forums]

[Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C

Re: [Imprimante] Installation dell 1250C