Forum d'entraide ! Posez vos questions ici
https://forums.archlinux.fr/
Désolé pour le temps de réaction... :CyDes a écrit :@ ed0
Peux tu poster ton conkyrc stp, il est super Merci d'avance.
Code : Tout sélectionner
##############################################
# Settings
##############################################
background yes
use_xft yes
xftfont Droid Sans:size=9
xftalpha 1
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
maximum_width 250
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
default_color grey
default_shade_color black
default_outline_color grey
alignment top_right
gap_x 15
gap_y 72
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
imlib_cache_size 0
color1 7a6c6c
color2 4CB2FF
color3 896161
color4 A45353
color5 c35353
color6 99ADC6
color7 896c6c
##############################################
# Output
##############################################
TEXT
${color grey}${font Liberation Mono:bold:size=9}${time %A},${time %e} ${time %B} ${time %G}${alignr}${time %H:%M}$font$color
${font Liberation Mono:bold:size=8}${color6}SYSTEM INFO${hr 2}$color$font
${color grey}Host:$alignr$nodename
Uptime:$alignr$uptime
RAM:$alignr$mem/$memmax
CPU usage:${color1}${goto 125}${font FnT_BasicShapes1:size=8}${if_match ${cpu cpu0} >0}0${else}p${endif}${if_match ${cpu cpu0} >10}0${else}p${endif}$color7${if_match ${cpu cpu0} >20}0${else}p${endif}${if_match ${cpu cpu0} >30}0${else}p${endif}$color3${if_match ${cpu cpu0} >40}0${else}p${endif}${if_match ${cpu cpu0} >50}0${else}${color3}p${endif}${if_match ${cpu cpu0} >60}${color4}0${else}${color4}p${endif}${if_match ${cpu cpu0} >70}${color4}0${else}${color4}p${endif}${if_match ${cpu cpu0} >80}${color5}0${else}${color5}p${endif}${if_match ${cpu cpu0} >90}${color5}0${else}${color5}p${endif}$font$color
CPU Temp: $alignr${exec sensors | grep 'temp1' | cut -c15-21}
${font Liberation Mono:bold:size=8}${color6}DISK${hr 2}$color$font
${color grey}System ${color1}${goto 125}${font FnT_BasicShapes1:size=8}${if_match ${fs_used_perc /} >0}0${else}p${endif}${if_match ${fs_used_perc /} >10}0${else}p${endif}$color7${if_match ${fs_used_perc /} >20}0${else}p${endif}${if_match ${fs_used_perc /} >30}0${else}p${endif}$color3${if_match ${fs_used_perc /} >40}0${else}p${endif}${if_match ${fs_used_perc /} >50}0${else}${color3}p${endif}${if_match ${fs_used_perc /} >60}${color4}0${else}${color4}p${endif}${if_match ${fs_used_perc /} >70}${color4}0${else}${color4}p${endif}${if_match ${fs_used_perc /} >80}${color5}0${else}${color5}p${endif}${if_match ${fs_used_perc /} >90}${color5}0${else}${color5}p${endif}$font
${color grey}Home ${color1}${goto 125}${font FnT_BasicShapes1:size=8}${if_match ${fs_used_perc /home/} >0}0${else}p${endif}${if_match ${fs_used_perc /home/} >10}0${else}p${endif}$color7${if_match ${fs_used_perc /home/} >20}0${else}p${endif}${if_match ${fs_used_perc /home/} >30}0${else}p${endif}$color3${if_match ${fs_used_perc /home/} >40}0${else}p${endif}${if_match ${fs_used_perc /home/} >50}${color3}0${else}p${endif}${if_match ${fs_used_perc /home/} >60}${color4}0${else}${color4}p${endif}${if_match ${fs_used_perc /home/} >70}${color4}0${else}${color4}p${endif}${if_match ${fs_used_perc /home/} >80}${color5}0${else}${color5}p${endif}${if_match ${fs_used_perc /home/} >90}${color5}0${else}${color5}p${endif}
${font Liberation Mono:bold:size=8}${color6}BATTERY${hr 2}$color$font
${color grey}${execi 125 acpi -b | awk '{print $3}' | sed -e s/,//2 -e s/,//}${color1}${goto 125}${font FnT_BasicShapes1:size=8}${if_match ${battery_percent} >0}0${else}p${endif}${if_match ${battery_percent} >10}0${else}p${endif}$color7${if_match ${battery_percent} >20}0${else}p${endif}${if_match ${battery_percent} >30}0${else}p${endif}$color3${if_match ${battery_percent} >40}0${else}p${endif}${if_match ${battery_percent} >50}0${else}${color3}p${endif}${if_match ${battery_percent} >60}${color4}0${else}${color4}p${endif}${if_match ${battery_percent} >70}${color4}0${else}${color4}p${endif}${if_match ${battery_percent} >80}${color5}0${else}${color5}p${endif}${if_match ${battery_percent} >90}${color5}0${else}${color5}p${endif}$font$color
${color grey}$alignr$battery_time$color
${if_running clementine}${font Liberation Mono:bold:size=8}${color6}ON AIR${hr 2}$color$font
${execp conkyClementine --datatype=CA > /dev/null}${image /tmp/cover -p 0,260 -s 55x50}
$alignr${execp conkyClementine --template=~/.conky/conkyclementine.template}$endif
${execi 10 rm -f .conky_wlan0; ifconfig -s | grep wlan0 > /dev/null && ifconfig -a wlan0 | grep 'inet addr:' > /dev/null && touch .conky_wlan0}${if_existing .conky_wlan0}${font Liberation Mono:bold:size=8}${color6}WIFI${hr 2}$font$color
${color grey}Essid:$alignr${wireless_essid wlan0}
${color grey}Signal:${color1}${goto 125}${font FnT_BasicShapes1:size=8}${if_match ${wireless_link_qual_perc wlan0} >0}0${else}p${endif}${if_match ${wireless_link_qual_perc wlan0} >10}0${else}p${endif}${color7}${if_match ${wireless_link_qual_perc wlan0} >20}0${else}p${endif}${if_match ${wireless_link_qual_perc wlan0} >30}0${else}p${endif}${color3}${if_match ${wireless_link_qual_perc wlan0} >40}0${else}p${endif}${if_match ${wireless_link_qual_perc wlan0} >50}0${else}${color3}p${endif}${if_match ${wireless_link_qual_perc wlan0} >60}${color4}0${else}${color4}p${endif}${if_match ${wireless_link_qual_perc wlan0} >70}${color4}0${else}${color4}p${endif}${if_match ${wireless_link_qual_perc wlan0} >80}${color5}0${else}${color5}p${endif}${if_match ${wireless_link_qual_perc wlan0} >90}${color5}0${else}${color5}p$font${endif}$font
${color grey}Download:$alignr${downspeed wlan0}
Upload:$alignr${upspeed wlan0}$color$endif
Code : Tout sélectionner
[--datatype=TI --maxlength=32]
${color6}[--datatype=AR --maxlength=32]
[--datatype=AL --maxlength=30]$color
[--datatype=PT]/[--datatype=LE]Code : Tout sélectionner
${color1}${goto 125}${font FnT_BasicShapes1:size=8}${if_match ${cpu cpu0} >0}0${else}p${endif}${if_match ${cpu cpu0} >10}0${else}p${endif}$color7${if_match ${cpu cpu0} >20}0${else}p${endif}${if_match ${cpu cpu0} >30}0${else}p${endif}$color3${if_match ${cpu cpu0} >40}0${else}p${endif}${if_match ${cpu cpu0} >50}0${else}${color3}p${endif}${if_match ${cpu cpu0} >60}${color4}0${else}${color4}p${endif}${if_match ${cpu cpu0} >70}${color4}0${else}${color4}p${endif}${if_match ${cpu cpu0} >80}${color5}0${else}${color5}p${endif}${if_match ${cpu cpu0} >90}${color5}0${else}${color5}p${endif}$font$color 
==> 
Merci...
Code : Tout sélectionner
# Conky settings #
background no
update_interval 1
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
double_buffer yes
no_buffers yes
text_buffer_size 2048
#imlib_cache_size 0
#temperature_unit fahrenheit
# Window specifications #
own_window yes
#own_window_type override
own_window_type normal
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
border_inner_margin 0
border_outer_margin 0
minimum_size 200 250
maximum_width 200
alignment tr
gap_x 35
gap_y 0
# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# Text settings #
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5
uppercase no
temperature_unit celsius
default_color FFFFFF
# Lua Load #
lua_load ~/clock_rings.lua
lua_draw_hook_pre clock_rings
TEXT
${voffset 2}${color green}${font caviar dreams:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font caviar dreams:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color green}${hr}
${alignr 20}${font caviar dreams:size=12}${time %H:%M}
#${image ~/.conky/fedora-logo.png -p 64,125 -s 70x20}#
${voffset 120}${font}${color green}
${color green}${voffset 35}CPU1: ${color FFFFFF}${cpu cpu1}%
${color green}CPU2: ${color FFFFFF}${cpu cpu2}%
${voffset 23}${color green}${goto 20}RAM: ${color FFFFFF}${memperc}%
${color green}${goto 20}Swap: ${color FFFFFF}${swapperc}%
${color FFFFFF}${goto 75}${voffset 23}${fs_used_perc /}%
${color green}${goto 75}Disk
${goto 70}${voffset 23}${color 317ACD}Wifi: ${color FFFFFF}${wireless_link_qual_perc wlan0}%
${color green}${goto 70}Net ${color FFFFFF}${downspeed eth0}/${upspeed eth0}
${color FFFFFF}${goto 120}${voffset 23}${battery_percent}%
${color FFFFFF}${goto 80}${battery_time}
${color green}${goto 120}Bat
Code : Tout sélectionner
--[[
Clock Rings by Linux Mint (2011) reEdited by despot77
This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.
IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings
Changelog:
+ v1.0 -- Original release (30.09.2009)
v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v 2011mint -- reEdit despot77 (18.02.2011)
]]
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xffffff,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0xFF6600,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.2,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=100, y=150,
-- "radius" is the radius of the ring.
radius=50,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=5,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.4,
x=100, y=150,
radius=56,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.6,
x=100, y=150,
radius=62,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%d',
max=31,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=100, y=150,
radius=70,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='time',
arg='%m',
max=12,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=1,
x=100, y=150,
radius=76,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='cpu',
arg='cpu2',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=50, y=250,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=50, y=250,
radius=19,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='swapperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=75, y=300,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=75, y=300,
radius=19,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=100, y=350,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='downspeedf',
arg='eth0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x339900,
fg_alpha=0.8,
x=125, y=400,
radius=25,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='upspeedf',
arg='eth0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xff6600,
fg_alpha=0.8,
x=125, y=400,
radius=20,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='wireless_link_qual_perc',
arg='wlan0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xBA2EBA,
fg_alpha=0.8,
x=125, y=400,
radius=9,
thickness=10,
start_angle=-90,
end_angle=180
},
{
name= 'battery_percent',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=150, y=450,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
}
-- Use these settings to define the origin and extent of your clock.
clock_r=65
-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
clock_x=100
clock_y=150
show_seconds=true
require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
-- Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
-- Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys
secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")
secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12
-- Draw hour hand
xh=xc+0.7*clock_r*math.sin(hours_arc)
yh=yc-0.7*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
cairo_stroke(cr)
-- Draw minute hand
xm=xc+clock_r*math.sin(mins_arc)
ym=yc-clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)
cairo_set_line_width(cr,3)
cairo_stroke(cr)
-- Draw seconds hand
if show_seconds then
xs=xc+clock_r*math.sin(secs_arc)
ys=yc-clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)
cairo_set_line_width(cr,1)
cairo_stroke(cr)
end
end
function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
-- Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
draw_clock_hands(cr,clock_x,clock_y)
end
