Page 1 sur 3
[Apache] Configuration
Publié : ven. 09 mai 2014, 21:41
par floflo77890
Bonsoir à tous,
Pour lire des pages web en php que je suis en train de coder, j'ai besoin d'apache mais j'ai un problème lors du lancement.
Pour commencer jais modifié le
/etc/httpd/conf/httpd.conf
en y ajoutant les lignes comme indiqué dans le wiki
Lamp mais quand je lance la commande
systemctl start httpd
j'obtiens un message d'erreur qui me dit de regarder
systemctl status httpd
que voici
Code : Tout sélectionner
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since ven. 2014-05-09 20:30:32 UTC; 11min ago
Process: 2345 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
mai 09 20:30:32 florentarchlinux apachectl[2345]: [Fri May 09 20:30:32.454533 2014] [:crit] [pi...P.
mai 09 20:30:32 florentarchlinux apachectl[2345]: AH00013: Pre-configuration failed
mai 09 20:30:32 florentarchlinux systemd[1]: httpd.service: control process exited, code=exite...s=1
mai 09 20:30:32 florentarchlinux systemd[1]: Failed to start Apache Web Server.
mai 09 20:30:32 florentarchlinux systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
Puis jais modifié le
/etc/hosts
que voici
Code : Tout sélectionner
#
# /etc/hosts: static lookup table for host names
#
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost serveurPhp
::1 localhost.localdomain localhost serveurPhp
# End of file
mais toujours rien.
Cela fait 3h que je recherche une solution mais je ne trouve rien alors si vous avez une idée.
Merci d'avance pour vos réponses.
Re: [Apache] Configuration
Publié : ven. 09 mai 2014, 22:46
par karhu
Question peut-être stupide, mais tu lances bien ta commande en tant que root ?
Re: [Apache] Configuration
Publié : ven. 09 mai 2014, 23:50
par benjarobin
Je pari que tu n'as pas lu entièrement la page du Wiki.
Peux tu donner la sortie (en root) de :
Code : Tout sélectionner
cat /etc/httpd/conf/httpd.conf
systemctl status -l httpd
journalctl --no-pager -b -u httpd.service
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 03:07
par Elbarto
il faut bien penser à faire cette modification indiquée dans le wiki afin que le module php puisse être chargé, c'est le piège classique depuis que le paquet apache est passée à la version 2.4 :
Code : Tout sélectionner
Remplacez :
LoadModule mpm_event_module modules/mod_mpm_event.so
Par :
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
attention aussi aux fautes de frappe/mauvaise manipulation en éditant le fichier de configuration d'apache, comme il est très touffu et bordélique il est facile par mégarde de se retrouver avec un fichier incorrect syntaxiquement,
dans le doute n'hésite pas à repartir de zéro avec un fichier de config par défaut d'apache, tu refais ensuite les manips du wiki apache/php,
si tu utilises phpmyadmin il y a aussi un autre piège concernant son fichier de configuration ( mot clé non reconnu par apache 2.4, faut corriger à la main, sauf si depuis les développeurs d'archlinux ont résolu le problème en corrigeant cela directement dans le paquet phpmyadmin ) , cf un ou deux topics qui en parlent sur la section réseau du forum
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 15:54
par floflo77890
@benjarobin voila les sorties des commandes demandées.
Pour
systemctl status -l httpd
Code : Tout sélectionner
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since sam. 2014-05-10 12:44:14 UTC; 2h 9min ago
Process: 694 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Pour
journalctl --no-pager -b -u httpd.service
Code : Tout sélectionner
-- Logs begin at lun. 2013-10-21 15:14:52 UTC, end at sam. 2014-05-10 12:47:23 UTC. --
Pour
cat /etc/httpd/conf/httpd.conf
Code : Tout sélectionner
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"
#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:/run/httpd
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
# Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User http
Group http
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin you@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />
AllowOverride none
Require all denied
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/srv/http"
<Directory "/srv/http">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Require all granted
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all denied
</Files>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/var/log/httpd/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "/var/log/httpd/access_log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock cgisock
</IfModule>
#
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 16:12
par karhu
Tu n'a pas appliqué la modification préconisée par @Elbarto. Elle est importante.
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 16:27
par floflo77890
Je viens de faire la modification comme me la indiqué @Elbarto et je n'est pas eu d'erreur lorsque j'ai lancé la commande sudo systemctl start httpd
.
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 16:53
par floflo77890
Maintenant le problème vient de phpmyadmin. pour l'installer jais suivi la page du wiki le concernant mais quand je lance la commande
cp /etc/webapps/phpmyadmin/apache.example.conf /etc/httpd/conf/extra/httpd-phpmyadmin.conf
j'ai en retour un message d'erreur me disant ceci:
Code : Tout sélectionner
cp: impossible d'évaluer « /etc/webapps/phpmyadmin/apache.example.conf »: Aucun fichier ou dossier de ce type
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 17:36
par karhu
Peut-être que le wiki n'est plus à jour ?
Chez moi je n'ai pas ce fichier dans le répertoire
/etc/httpd/conf/extra
.
La configuration de
phpmyadmin se fait avec son propre fichier
/etc/webapps/phpmyadmin/config.inc.php
.
À la racine de mon serveur j'ai juste créé un lien symbolique pour me faciliter son accès :
Edit:
Après vérification, j'ai aussi modifié dans
/etc/php/php.ini
la variable
open_basedir pour y ajouter le chemin d'accès à phpmyadmin :
/usr/share/webappps/phpmyadmin
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 17:37
par Elbarto
le wiki fr concernant phpmyadmin n'a pas été mis à jour, elle concerne une ancienne version de phpmyadmin, avec les versions récentes les instructions sont erronées, car si tu regardes bien le contenu des fichiers du paquet phpmyadmin le fichier /etc/webapps/phpmyadmin/apache.example.conf n'existe pas :
https://www.archlinux.org/packages/comm ... hpmyadmin/
c'est ce que je disais plus haut, les mainteneurs de ce paquet ont retiré le fichier exemple de phpmyadmin car il contenait un mot clé qui n'est plus pris en compte par apache 2.4,
il faut alors créer soi-même le fichier /etc/httpd/conf/extra/httpd-phpmyadmin.conf et mettre dedans ceci :
Code : Tout sélectionner
Alias /phpmyadmin "/usr/share/webapps/phpMyAdmin"
<Directory "/usr/share/webapps/phpMyAdmin">
DirectoryIndex index.html index.php
AllowOverride All
Options FollowSymlinks
Require all granted
</Directory>
et suivre les instructions sur la page wiki US de phpmyadmin :
https://wiki.archlinux.org/index.php/Phpmyadmin
il ne faut pas hésiter à basculer sur la version anglaise du wiki quand tu bloques, car la version française n'est pas toujours à jour ou bien n'est pas très complète ( probablement à cause d'un manque de contributeurs )
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 17:58
par karhu
@Elbarto quel est l'intérêt de ce fichier de configuration ?
Je ne l'ai pas et j'utilise régulièrement phpmyadmin sans problème, précision mon serveur est local, pas d'accès depuis l'extérieur.
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 18:10
par benjarobin
@karhu Tu es obligé d'avoir un fichier de ce genre

Tu peux le vérifier facilement via :
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 19:08
par karhu
Désolé @benjarobin je n'en ai pas ! D'où ma question.
Mon répertoire /etc/httpd/conf/extra
Code : Tout sélectionner
ll /etc/httpd/conf/extra/
total 68
-rw-r--r-- 1 root root 2877 27 févr. 06:32 httpd-autoindex.conf
-rw-r--r-- 1 root root 1777 27 févr. 06:32 httpd-dav.conf
-rw-r--r-- 1 root root 2942 27 févr. 06:32 httpd-default.conf
-rw-r--r-- 1 root root 1119 27 févr. 06:32 httpd-info.conf
-rw-r--r-- 1 root root 5078 18 juil. 2013 httpd-languages.conf
-rw-r--r-- 1 root root 1021 16 mars 20:48 httpd-manual.conf
-rw-r--r-- 1 root root 4450 27 févr. 06:32 httpd-mpm.conf
-rw-r--r-- 1 root root 2216 27 févr. 06:32 httpd-multilang-errordoc.conf
-rw-r--r-- 1 root root 11263 16 mars 20:48 httpd-ssl.conf
-rw-r--r-- 1 root root 694 27 févr. 06:32 httpd-userdir.conf
-rw-r--r-- 1 root root 1491 27 févr. 06:32 httpd-vhosts.conf
-rw-r--r-- 1 root root 318 12 nov. 17:47 php5_module.conf
-rw-r--r-- 1 root root 3161 27 févr. 06:32 proxy-html.conf
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 19:26
par benjarobin
Et tu accèdes comment à phpMyAdmin, via quelle URL ? As tu bien lancé la commande (le grep) ?
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 19:31
par karhu
La commande ne renvoie rien, c'est pour ça que j'ai listé le répertoire.
J'accède à mes bases par un lien sur ma page d'accueil : localhost/phpmyadmin/index.php
.
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 19:47
par benjarobin
Je ne comprends pas... Peux tu donner la sortie de
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 20:51
par karhu
Code : Tout sélectionner
grep -vE "^ *#|^ *$" /etc/httpd/conf/httpd.conf
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
User http
Group http
</IfModule>
ServerAdmin you@example.com
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/srv/http"
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-multilang-errordoc.conf
Include conf/extra/httpd-autoindex.conf
Include conf/extra/httpd-languages.conf
Include conf/extra/httpd-userdir.conf
Include conf/extra/httpd-default.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Rappelle toi je suis juste en local.
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 21:54
par benjarobin
Très honnêtement je ne comprend pas, si j'applique une telle configuration je n'aurais jamais accès à phpmyadmin (je viens de le tester).
De plus je ne comprend pas ce que tu essayes de me dire : "je suis juste en local". Pour moi il n'y a pas de local ou d'externe... C'est juste une règle de pare-feu/iptables.
Bref, tu as forcément oublié de me dire quelque chose, utilises tu apache ? Ou Nginx, ou autre ?
Quel est le contenu de /srv/http ? Utilises tu phpmyadmin des dépôts ?
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 22:14
par karhu
Quand j'écris que je suis en local cela implique que je suis le seul, avec les autres PC de mon réseau, à pouvoir accéder au serveur et les modifications ne peuvent être faites que depuis la machine qui l'abrite. Alors je ne me suis pas préoccupé des droits d'accès aux pages ni aux répertoires de mon disque, aucun fichier
.htaccess
. Je n'ai pas de machines virtuelles, ni de sites, ni d'alias pour un accès direct. C'est peut-être la raison pour laquelle je n'ai pas besoin de ce fichier, j'utilise implicitement les paramètres par défaut.
Cette configuration me permet de tester différents CMS, et même des futurs sites, sans avoir à les installer comme serveurs, juste avec un liens symbolique vers leur répertoire d'installation. Un petit fichier de description pour une fonction en PHP et ma page d'accueil est remise à jour. Cette façon de travailler n'est peut-être pas orthodoxe, mais elle convient parfaitement à ce que je fais (du moins pour l'instant

).
J'en déduis que si je ne travaille pas d'une manière normale, il vaudrait mieux que je ne réponde pas sur le forum.

Mais comment le savoir si ça marche pour moi ?
Re: [Apache] Configuration
Publié : sam. 10 mai 2014, 22:22
par floflo77890
je viens de créer le fichier de configuration comme me la indiqué @karhu puis jais suivi le wiki.org pour le reste de la configuration mais je n'est toujours pas accès à phpmyadmin.