J'ai demarre sur l'iso archuser avec Xfce (a nouveau pas d'accents car mon clavier est qwerty), et le serveur X n'a pas pu se lancer.
Les messages du boot se terminaient pas :
Code : Tout sélectionner
[FAILED] Failed to start Light Display Manager.
See 'systemctl status lightdm.service' for details.
Puis 4 lignes [OK] que je ne reproduis pas.
Les tty etaient accessibles. Dans l'un deux j'ai tape cette commande :
Code : Tout sélectionner
# systemctl status lightdm.service
× lightdm.service - Light Display Manager
Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Sat 2021-05-29 16:17:52 CEST; 9min ago
Docs: man:lightdm(1)
Process: 482 ExecStart=/usr/bin/lightdm (code=exited, status=1/FAILURE)
Main PID: 482 (code=exited, status=1/FAILURE)
CPU: 158ms
mai 29 16:17:52 archiso systemd[1]: lightdm.service: Main process exited, code=exited, status=1/FAILURE
mai 29 16:17:52 archiso systemd[1]: lightdm.service: Failed with result 'exit-code'.
mai 29 16:17:52 archiso systemd[1]: lightdm.service: Scheduled restart job, restart counter is at 5.
mai 29 16:17:52 archiso systemd[1]: Stopped Light Display Manager.
mai 29 16:17:52 archiso systemd[1]: lightdm.service: Start request repeated too quickly.
mai 29 16:17:52 archiso systemd[1]: lightdm.service: Failed with result 'exit-code'.
mai 29 16:17:52 archiso systemd[1]: Failed to start Light Display Manager.
Voici le contenu de /var/log/Xorg.0.log ou on retrouve les erreurs finales en
Failed to initialize glamor at ScreenInit() time
Code : Tout sélectionner
[ 12.595]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 12.595] Build Operating System: Linux Archlinux
[ 12.595] Current Operating System: Linux archiso 5.12.7-arch1-1 #1 SMP PREEMPT Wed, 26 May 2021 22:03:57 +0000 x86_64
[ 12.595] Kernel command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz-linux archisolabel=ARCHUSER_202105 img_dev=/dev/sdb5 img_loop=/iso/aui-xfce-linux_5_12_7-fr_FR-0528-x64.iso earlymodules=loop
[ 12.595] Build Date: 13 April 2021 03:12:10PM
[ 12.595]
[ 12.595] Current version of pixman: 0.40.0
[ 12.595] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.595] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.595] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 16:17:52 2021
[ 12.596] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.596] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.596] (==) No Layout section. Using the first Screen section.
[ 12.596] (==) No screen section available. Using defaults.
[ 12.596] (**) |-->Screen "Default Screen Section" (0)
[ 12.596] (**) | |-->Monitor "<default monitor>"
[ 12.596] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.596] (==) Automatically adding devices
[ 12.596] (==) Automatically enabling devices
[ 12.596] (==) Automatically adding GPU devices
[ 12.596] (==) Automatically binding GPU devices
[ 12.596] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12.596] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 12.596] Entry deleted from font path.
[ 12.596] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 12.596] Entry deleted from font path.
[ 12.596] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 12.596] Entry deleted from font path.
[ 12.596] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 12.596] Entry deleted from font path.
[ 12.597] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 12.597] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.597] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.597] (II) Module ABI versions:
[ 12.597] X.Org ANSI C Emulation: 0.4
[ 12.597] X.Org Video Driver: 24.1
[ 12.597] X.Org XInput driver : 24.1
[ 12.597] X.Org Server Extension : 10.0
[ 12.598] (++) using VT number 7
[ 12.598] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 12.598] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.606] (--) PCI:*(0@0:2:0) 8086:29c2:1458:d000 rev 16, Mem @ 0xe1200000/524288, 0xd0000000/268435456, 0xe1000000/1048576, I/O @ 0x0000e000/8, BIOS @ 0x????????/131072
[ 12.607] (II) Open ACPI successful (/var/run/acpid.socket)
[ 12.607] (II) LoadModule: "glx"
[ 12.607] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.609] (II) Module glx: vendor="X.Org Foundation"
[ 12.609] compiled for 1.20.11, module version = 1.0.0
[ 12.609] ABI class: X.Org Server Extension, version 10.0
[ 12.609] (==) Matched intel as autoconfigured driver 0
[ 12.609] (==) Matched modesetting as autoconfigured driver 1
[ 12.609] (==) Matched fbdev as autoconfigured driver 2
[ 12.609] (==) Matched vesa as autoconfigured driver 3
[ 12.609] (==) Assigned the driver to the xf86ConfigLayout
[ 12.609] (II) LoadModule: "intel"
[ 12.610] (WW) Warning, couldn't open module intel
[ 12.610] (EE) Failed to load module "intel" (module does not exist, 0)
[ 12.610] (II) LoadModule: "modesetting"
[ 12.610] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 12.611] (II) Module modesetting: vendor="X.Org Foundation"
[ 12.611] compiled for 1.20.11, module version = 1.20.11
[ 12.611] Module class: X.Org Video Driver
[ 12.611] ABI class: X.Org Video Driver, version 24.1
[ 12.611] (II) LoadModule: "fbdev"
[ 12.611] (WW) Warning, couldn't open module fbdev
[ 12.611] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 12.611] (II) LoadModule: "vesa"
[ 12.611] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 12.611] (II) Module vesa: vendor="X.Org Foundation"
[ 12.611] compiled for 1.20.9, module version = 2.5.0
[ 12.611] Module class: X.Org Video Driver
[ 12.611] ABI class: X.Org Video Driver, version 24.1
[ 12.611] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12.611] (II) VESA: driver for VESA chipsets: vesa
[ 12.619] (II) modeset(0): using drv /dev/dri/card0
[ 12.619] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.619] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 12.619] (==) modeset(0): RGB weight 888
[ 12.619] (==) modeset(0): Default visual is TrueColor
[ 12.619] (II) Loading sub module "glamoregl"
[ 12.619] (II) LoadModule: "glamoregl"
[ 12.619] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 12.625] (II) Module glamoregl: vendor="X.Org Foundation"
[ 12.625] compiled for 1.20.11, module version = 1.0.1
[ 12.625] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.649] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) G33
[ 12.649] (II) modeset(0): glamor initialized
[ 12.668] (II) modeset(0): Output VGA-1 has no monitor section
[ 12.683] (II) modeset(0): EDID for output VGA-1
[ 12.683] (II) modeset(0): Manufacturer: BNQ Model: 78e6 Serial#: 16843009
[ 12.683] (II) modeset(0): Year: 2019 Week: 51
[ 12.683] (II) modeset(0): EDID Version: 1.3
[ 12.683] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 12.683] (II) modeset(0): Sync: Separate Composite SyncOnGreen
[ 12.683] (II) modeset(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 12.683] (II) modeset(0): Gamma: 2.20
[ 12.683] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 12.683] (II) modeset(0): Default color space is primary color space
[ 12.683] (II) modeset(0): First detailed timing is preferred mode
[ 12.683] (II) modeset(0): redX: 0.653 redY: 0.336 greenX: 0.322 greenY: 0.609
[ 12.683] (II) modeset(0): blueX: 0.152 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 12.683] (II) modeset(0): Supported established timings:
[ 12.683] (II) modeset(0): 720x400@70Hz
[ 12.683] (II) modeset(0): 640x480@60Hz
[ 12.683] (II) modeset(0): 640x480@75Hz
[ 12.683] (II) modeset(0): 800x600@60Hz
[ 12.683] (II) modeset(0): 800x600@75Hz
[ 12.683] (II) modeset(0): 832x624@75Hz
[ 12.683] (II) modeset(0): 1024x768@60Hz
[ 12.683] (II) modeset(0): 1024x768@75Hz
[ 12.683] (II) modeset(0): 1280x1024@75Hz
[ 12.683] (II) modeset(0): 1152x864@75Hz
[ 12.683] (II) modeset(0): Manufacturer's mask: 0
[ 12.683] (II) modeset(0): Supported standard timings:
[ 12.683] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 12.683] (II) modeset(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 12.683] (II) modeset(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 12.683] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.683] (II) modeset(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 12.683] (II) modeset(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 12.683] (II) modeset(0): Supported detailed timing:
[ 12.683] (II) modeset(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 12.683] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 12.683] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 12.683] (II) modeset(0): Serial No: ETMCK02101SL0
[ 12.683] (II) modeset(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 215 MHz
[ 12.683] (II) modeset(0): Monitor name: BenQ GW2780
[ 12.683] (II) modeset(0): EDID (in hex):
[ 12.683] (II) modeset(0): 00ffffffffffff0009d1e67801010101
[ 12.683] (II) modeset(0): 331d01030e3c22782e4825a756529c27
[ 12.683] (II) modeset(0): 0f5054a56b80d1c0b300a9c081808100
[ 12.683] (II) modeset(0): 81c001010101023a801871382d40582c
[ 12.683] (II) modeset(0): 450056502100001e000000ff0045544d
[ 12.683] (II) modeset(0): 434b3032313031534c30000000fd0032
[ 12.683] (II) modeset(0): 4c1e5315000a202020202020000000fc
[ 12.683] (II) modeset(0): 0042656e51204757323738300a20007a
[ 12.683] (II) modeset(0): Printing probed modes for output VGA-1
[ 12.684] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 12.684] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 12.684] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 12.684] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12.684] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.684] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 12.684] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 12.684] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 12.684] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 12.684] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.684] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 12.684] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12.684] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.684] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12.684] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.684] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 12.684] (II) modeset(0): Output VGA-1 connected
[ 12.684] (II) modeset(0): Using exact sizes for initial modes
[ 12.684] (II) modeset(0): Output VGA-1 using initial mode 1920x1080 +0+0
[ 12.684] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.684] (==) modeset(0): DPI set to (96, 96)
[ 12.684] (II) Loading sub module "fb"
[ 12.684] (II) LoadModule: "fb"
[ 12.684] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.684] (II) Module fb: vendor="X.Org Foundation"
[ 12.684] compiled for 1.20.11, module version = 1.0.0
[ 12.684] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.684] (II) UnloadModule: "vesa"
[ 12.684] (II) Unloading vesa
[ 12.685] Require OpenGL version 2.1 or later.
[ 12.685] (EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
[ 12.685] (EE)
Fatal server error:
[ 12.685] (EE) AddScreen/ScreenInit failed for driver 0
[ 12.685] (EE)
[ 12.685] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 12.685] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 12.685] (EE)
[ 12.692] (EE) Server terminated with error (1). Closing log file.
Les pilotes videos installes etaient xf86-video-{amdgpu,ati,nouveau,vesa}. Dans /etc/mkintcpio la ligne des modules etait
MODULES=()
.
J'ai installe xf86-video-intel et relance lightdm avec
systemctl start lightdm
et la c'etait bon : apres un ecran decoratif je suis arrive dans le bureau Xfce de root. C'est la-dedans que je suis en train d'ecrire.
Maintenant /var/log/Xorg.0.log contient ceci, et on retrouve les erreurs
your system is too slow
.
Code : Tout sélectionner
[ 883.116]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 883.116] Build Operating System: Linux Archlinux
[ 883.116] Current Operating System: Linux archiso 5.12.7-arch1-1 #1 SMP PREEMPT Wed, 26 May 2021 22:03:57 +0000 x86_64
[ 883.116] Kernel command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz-linux archisolabel=ARCHUSER_202105 img_dev=/dev/sdb5 img_loop=/iso/aui-xfce-linux_5_12_7-fr_FR-0528-x64.iso earlymodules=loop
[ 883.116] Build Date: 13 April 2021 03:12:10PM
[ 883.117]
[ 883.117] Current version of pixman: 0.40.0
[ 883.117] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 883.117] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 883.117] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 16:32:28 2021
[ 883.117] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 883.117] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 883.118] (==) No Layout section. Using the first Screen section.
[ 883.118] (==) No screen section available. Using defaults.
[ 883.118] (**) |-->Screen "Default Screen Section" (0)
[ 883.118] (**) | |-->Monitor "<default monitor>"
[ 883.118] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 883.118] (==) Automatically adding devices
[ 883.118] (==) Automatically enabling devices
[ 883.118] (==) Automatically adding GPU devices
[ 883.118] (==) Automatically binding GPU devices
[ 883.118] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 883.118] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 883.118] Entry deleted from font path.
[ 883.118] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 883.118] Entry deleted from font path.
[ 883.118] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 883.118] Entry deleted from font path.
[ 883.118] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 883.118] Entry deleted from font path.
[ 883.118] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 883.118] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 883.118] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 883.118] (II) Module ABI versions:
[ 883.118] X.Org ANSI C Emulation: 0.4
[ 883.118] X.Org Video Driver: 24.1
[ 883.118] X.Org XInput driver : 24.1
[ 883.118] X.Org Server Extension : 10.0
[ 883.119] (++) using VT number 7
[ 883.119] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 883.120] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 883.128] (--) PCI:*(0@0:2:0) 8086:29c2:1458:d000 rev 16, Mem @ 0xe1200000/524288, 0xd0000000/268435456, 0xe1000000/1048576, I/O @ 0x0000e000/8, BIOS @ 0x????????/131072
[ 883.128] (II) Open ACPI successful (/var/run/acpid.socket)
[ 883.128] (II) LoadModule: "glx"
[ 883.128] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 883.131] (II) Module glx: vendor="X.Org Foundation"
[ 883.131] compiled for 1.20.11, module version = 1.0.0
[ 883.131] ABI class: X.Org Server Extension, version 10.0
[ 883.131] (==) Matched intel as autoconfigured driver 0
[ 883.131] (==) Matched modesetting as autoconfigured driver 1
[ 883.131] (==) Matched fbdev as autoconfigured driver 2
[ 883.131] (==) Matched vesa as autoconfigured driver 3
[ 883.131] (==) Assigned the driver to the xf86ConfigLayout
[ 883.131] (II) LoadModule: "intel"
[ 883.131] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 883.131] (II) Module intel: vendor="X.Org Foundation"
[ 883.131] compiled for 1.20.10, module version = 2.99.917
[ 883.131] Module class: X.Org Video Driver
[ 883.131] ABI class: X.Org Video Driver, version 24.1
[ 883.131] (II) LoadModule: "modesetting"
[ 883.132] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 883.132] (II) Module modesetting: vendor="X.Org Foundation"
[ 883.132] compiled for 1.20.11, module version = 1.20.11
[ 883.132] Module class: X.Org Video Driver
[ 883.132] ABI class: X.Org Video Driver, version 24.1
[ 883.132] (II) LoadModule: "fbdev"
[ 883.133] (WW) Warning, couldn't open module fbdev
[ 883.133] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 883.133] (II) LoadModule: "vesa"
[ 883.133] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 883.133] (II) Module vesa: vendor="X.Org Foundation"
[ 883.133] compiled for 1.20.9, module version = 2.5.0
[ 883.133] Module class: X.Org Video Driver
[ 883.133] ABI class: X.Org Video Driver, version 24.1
[ 883.133] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 883.133] (II) intel: Driver for Intel(R) HD Graphics
[ 883.133] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 883.133] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 883.134] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 883.134] (II) VESA: driver for VESA chipsets: vesa
[ 883.147] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 883.147] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[ 883.162] (WW) Falling back to old probe method for modesetting
[ 883.163] (--) intel(0): Integrated Graphics Chipset: Intel(R) G33
[ 883.163] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1; using a maximum of 2 threads
[ 883.163] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 883.163] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 883.163] (==) intel(0): RGB weight 888
[ 883.163] (==) intel(0): Default visual is TrueColor
[ 883.164] (II) intel(0): Output VGA1 has no monitor section
[ 883.164] (II) intel(0): Enabled output VGA1
[ 883.164] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 883.164] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 883.164] (II) intel(0): Enabled output VIRTUAL1
[ 883.164] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 0
[ 883.164] (==) intel(0): TearFree disabled
[ 883.164] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 883.164] (==) intel(0): DPI set to (96, 96)
[ 883.164] (II) Loading sub module "dri3"
[ 883.164] (II) LoadModule: "dri3"
[ 883.164] (II) Module "dri3" already built-in
[ 883.164] (II) Loading sub module "dri2"
[ 883.164] (II) LoadModule: "dri2"
[ 883.165] (II) Module "dri2" already built-in
[ 883.165] (II) Loading sub module "present"
[ 883.165] (II) LoadModule: "present"
[ 883.165] (II) Module "present" already built-in
[ 883.165] (II) UnloadModule: "modesetting"
[ 883.165] (II) Unloading modesetting
[ 883.165] (II) UnloadModule: "vesa"
[ 883.165] (II) Unloading vesa
[ 883.165] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 883.165] (==) intel(0): Backing store enabled
[ 883.165] (==) intel(0): Silken mouse disabled
[ 883.165] (II) intel(0): HW Cursor enabled
[ 883.165] (==) intel(0): DPMS enabled
[ 883.165] (==) intel(0): Display hotplug detection enabled
[ 883.165] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 883.165] (II) intel(0): [DRI2] Setup complete
[ 883.167] (II) intel(0): [DRI2] DRI driver: i915
[ 883.167] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 883.168] (II) intel(0): direct rendering: DRI2 enabled
[ 883.168] (II) intel(0): hardware support for Present enabled
[ 883.168] (II) Initializing extension Generic Event Extension
[ 883.168] (II) Initializing extension SHAPE
[ 883.168] (II) Initializing extension MIT-SHM
[ 883.168] (II) Initializing extension XInputExtension
[ 883.170] (II) Initializing extension XTEST
[ 883.170] (II) Initializing extension BIG-REQUESTS
[ 883.171] (II) Initializing extension SYNC
[ 883.171] (II) Initializing extension XKEYBOARD
[ 883.171] (II) Initializing extension XC-MISC
[ 883.172] (II) Initializing extension SECURITY
[ 883.172] (II) Initializing extension XFIXES
[ 883.172] (II) Initializing extension RENDER
[ 883.172] (II) Initializing extension RANDR
[ 883.173] (II) Initializing extension COMPOSITE
[ 883.173] (II) Initializing extension DAMAGE
[ 883.174] (II) Initializing extension MIT-SCREEN-SAVER
[ 883.174] (II) Initializing extension DOUBLE-BUFFER
[ 883.174] (II) Initializing extension RECORD
[ 883.174] (II) Initializing extension DPMS
[ 883.175] (II) Initializing extension Present
[ 883.175] (II) Initializing extension DRI3
[ 883.175] (II) Initializing extension X-Resource
[ 883.175] (II) Initializing extension XVideo
[ 883.176] (II) Initializing extension XVideo-MotionCompensation
[ 883.176] (II) Initializing extension GLX
[ 883.189] (II) AIGLX: Loaded and initialized i915
[ 883.189] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 883.189] (II) Initializing extension XFree86-VidModeExtension
[ 883.189] (II) Initializing extension XFree86-DGA
[ 883.190] (II) Initializing extension XFree86-DRI
[ 883.190] (II) Initializing extension DRI2
[ 883.204] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 883.207] (II) intel(0): Setting screen physical size to 508 x 285
[ 883.315] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 883.315] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 883.316] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 883.316] (**) Power Button: Applying InputClass "system-keyboard"
[ 883.316] (II) LoadModule: "libinput"
[ 883.318] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 883.321] (II) Module libinput: vendor="X.Org Foundation"
[ 883.321] compiled for 1.20.11, module version = 1.0.1
[ 883.321] Module class: X.Org XInput Driver
[ 883.321] ABI class: X.Org XInput driver, version 24.1
[ 883.321] (II) Using input driver 'libinput' for 'Power Button'
[ 883.321] (**) Power Button: always reports core events
[ 883.321] (**) Option "Device" "/dev/input/event1"
[ 883.321] (**) Option "_source" "server/udev"
[ 883.342] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 883.342] (II) event1 - Power Button: device is a keyboard
[ 883.342] (II) event1 - Power Button: device removed
[ 883.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 883.394] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 883.394] (**) Option "xkb_model" "pc105"
[ 883.394] (**) Option "xkb_layout" "fr"
[ 883.394] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 883.459] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 883.460] (II) event1 - Power Button: device is a keyboard
[ 883.461] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 883.461] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 883.461] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 883.461] (**) Power Button: Applying InputClass "system-keyboard"
[ 883.461] (II) Using input driver 'libinput' for 'Power Button'
[ 883.461] (**) Power Button: always reports core events
[ 883.461] (**) Option "Device" "/dev/input/event0"
[ 883.461] (**) Option "_source" "server/udev"
[ 883.462] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 883.462] (II) event0 - Power Button: device is a keyboard
[ 883.462] (II) event0 - Power Button: device removed
[ 883.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 883.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 883.489] (**) Option "xkb_model" "pc105"
[ 883.489] (**) Option "xkb_layout" "fr"
[ 883.489] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 883.491] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 883.491] (II) event0 - Power Button: device is a keyboard
[ 883.493] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 883.493] (II) No input driver specified, ignoring this device.
[ 883.493] (II) This device may have been added with another device file.
[ 883.494] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 883.494] (II) No input driver specified, ignoring this device.
[ 883.494] (II) This device may have been added with another device file.
[ 883.495] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 883.495] (II) No input driver specified, ignoring this device.
[ 883.495] (II) This device may have been added with another device file.
[ 883.496] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[ 883.496] (II) No input driver specified, ignoring this device.
[ 883.496] (II) This device may have been added with another device file.
[ 883.497] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[ 883.497] (II) No input driver specified, ignoring this device.
[ 883.497] (II) This device may have been added with another device file.
[ 883.498] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event2)
[ 883.498] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 883.498] (**) Logitech Optical USB Mouse: Applying InputClass "libinput pointer catchall"
[ 883.498] (II) Using input driver 'libinput' for 'Logitech Optical USB Mouse'
[ 883.498] (**) Logitech Optical USB Mouse: always reports core events
[ 883.498] (**) Option "Device" "/dev/input/event2"
[ 883.499] (**) Option "_source" "server/udev"
[ 883.558] (II) event2 - Logitech Optical USB Mouse: is tagged by udev as: Mouse
[ 883.558] (II) event2 - Logitech Optical USB Mouse: device set to 400 DPI
[ 883.558] (II) event2 - Logitech Optical USB Mouse: device is a pointer
[ 883.558] (II) event2 - Logitech Optical USB Mouse: device removed
[ 883.638] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:046D:C016.0001/input/input2/event2"
[ 883.638] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 8)
[ 883.638] (**) Option "AccelerationScheme" "none"
[ 883.638] (**) Logitech Optical USB Mouse: (accel) selected scheme none/0
[ 883.638] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 883.638] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 883.695] (II) event2 - Logitech Optical USB Mouse: is tagged by udev as: Mouse
[ 883.695] (II) event2 - Logitech Optical USB Mouse: device set to 400 DPI
[ 883.695] (II) event2 - Logitech Optical USB Mouse: device is a pointer
[ 883.697] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 883.697] (II) No input driver specified, ignoring this device.
[ 883.697] (II) This device may have been added with another device file.
[ 883.699] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event3)
[ 883.699] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 883.699] (**) Dell Dell USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 883.699] (**) Dell Dell USB Keyboard: Applying InputClass "system-keyboard"
[ 883.699] (II) Using input driver 'libinput' for 'Dell Dell USB Keyboard'
[ 883.699] (**) Dell Dell USB Keyboard: always reports core events
[ 883.699] (**) Option "Device" "/dev/input/event3"
[ 883.699] (**) Option "_source" "server/udev"
[ 883.702] (II) event3 - Dell Dell USB Keyboard: is tagged by udev as: Keyboard
[ 883.702] (II) event3 - Dell Dell USB Keyboard: device is a keyboard
[ 883.703] (II) event3 - Dell Dell USB Keyboard: device removed
[ 883.754] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.0/0003:413C:2003.0002/input/input3/event3"
[ 883.754] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD, id 9)
[ 883.754] (**) Option "xkb_model" "pc105"
[ 883.754] (**) Option "xkb_layout" "fr"
[ 883.754] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 883.758] (II) event3 - Dell Dell USB Keyboard: is tagged by udev as: Keyboard
[ 883.758] (II) event3 - Dell Dell USB Keyboard: device is a keyboard
[ 883.760] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event5)
[ 883.760] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 883.760] (**) UVC Camera (046d:0825): Applying InputClass "libinput keyboard catchall"
[ 883.760] (**) UVC Camera (046d:0825): Applying InputClass "system-keyboard"
[ 883.760] (II) Using input driver 'libinput' for 'UVC Camera (046d:0825)'
[ 883.761] (**) UVC Camera (046d:0825): always reports core events
[ 883.761] (**) Option "Device" "/dev/input/event5"
[ 883.761] (**) Option "_source" "server/udev"
[ 883.763] (II) event5 - UVC Camera (046d:0825): is tagged by udev as: Keyboard
[ 883.763] (II) event5 - UVC Camera (046d:0825): device is a keyboard
[ 883.764] (II) event5 - UVC Camera (046d:0825): device removed
[ 883.826] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0/input/input5/event5"
[ 883.826] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 10)
[ 883.826] (**) Option "xkb_model" "pc105"
[ 883.826] (**) Option "xkb_layout" "fr"
[ 883.826] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 883.828] (II) event5 - UVC Camera (046d:0825): is tagged by udev as: Keyboard
[ 883.829] (II) event5 - UVC Camera (046d:0825): device is a keyboard
[ 883.830] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 883.830] (II) No input driver specified, ignoring this device.
[ 883.830] (II) This device may have been added with another device file.
[ 885.185] (II) intel(0): EDID vendor "BNQ", prod id 30950
[ 885.185] (II) intel(0): Using EDID range info for horizontal sync
[ 885.185] (II) intel(0): Using EDID range info for vertical refresh
[ 885.185] (II) intel(0): Printing DDC gathered Modelines:
[ 885.185] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 885.185] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 885.185] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 885.185] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 885.185] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 885.185] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 885.185] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 885.185] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 885.185] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 885.185] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 885.185] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 885.185] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 885.185] (II) intel(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 885.185] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 885.185] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 885.185] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 976.770] (EE) Error loading keymap /var/lib/xkbserver-0.xkm
[ 1159.937] (EE) client bug: timer event2 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
La seule chose que je ne peux peux pas savoir (et que j'aimerais bien savoir), c'est si ce systeme est plus stable a l'usage que celui que j'ai installe depuis l'iso de base.