Archlinux.fr [Forums]

Forum d'entraide ! Posez vos questions ici
https://forums.archlinux.fr/

[synaptics] Défilement horizontal et vertical impossible

https://forums.archlinux.fr/viewtopic.php?t=3531

Page 1 sur 1

[synaptics] Défilement horizontal et vertical impossible

Publié : mar. 07 avr. 2009, 16:59
par claudex
Bonjour,

J'ai installé Archlinux hier et je n'arrive pas à activé le défilement vertical et horizontal sur mon trackpad malgré mes recherches sur les wikis et forums (et malgré le fait que ça marchait sur d'autres distrib). Je pense que c'est lié au fait que Xorg ne tienne pas compte de ma configuration de Hal.

Voici mon log Xorg [/var/log/Xorg.0.log]

Code : Tout sélectionner

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686 
Current Operating System: Linux xavier-laptop 2.6.28-ARCH #1 SMP PREEMPT Tue Mar 17 06:42:43 UTC 2009 i686
Build Date: 05 April 2009  01:04:48PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr  7 15:54:17 2009
(EE) Unable to locate/open config file
(II) Loader magic: 0xba0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc100000/0, 0xc0000000/0, 0xdc200000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc180000/0
(==) Matched intel for the autoconfigured driver
New driver is "intel"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
		Screen	"Builtin Default vesa Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.4.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "fbdev"

(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"

(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.1.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(++) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDC100000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.4.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000203 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status:
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xdc100000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
Warning: font renderer for ".ttf" already registered at priority 0
Warning: font renderer for ".ttc" already registered at priority 0
Warning: font renderer for ".otf" already registered at priority 0
Warning: font renderer for ".otc" already registered at priority 0
Warning: font renderer for ".pfa" already registered at priority 0
Warning: font renderer for ".pfb" already registered at priority 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 1.0.0
(**) Option "Device" "/dev/input/event8"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(**) Option "SHMConfig" "false"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "HorizScrollDelta" "100"
(**) Option "VertEdgeScroll" "true"
(**) Option "HorizEdgeScroll" "true"
(**) Option "CornerCoasting" "true"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) Option "AlwaysCore" "true"
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event7"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ch"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ch"
(**) Option "xkb_variant" "fr"
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.25  1280 1328 1360 1440  800 802 808 823 -hsync -vsync (49.5 kHz)
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(EE) intel(0): underrun on pipe B!
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.25  1280 1328 1360 1440  800 802 808 823 -hsync -vsync (49.5 kHz)
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.25  1280 1328 1360 1440  800 802 808 823 -hsync -vsync (49.5 kHz)
(II) intel(0): EDID vendor "LPL", prod id 10752
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
Et voici ma configuration de Hal [/etc/hal/fdi/policy/11-x11-synaptics.fdi]:

Code : Tout sélectionner

<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
	<device>
		<match key="info.capabilities" contains="input.touchpad">
			<match key="info.product" contains="AlpsPS/2 ALPS">
				<merge key="input.x11_driver" type="string">synaptics</merge>
			</match>
	<!-- Arbitrary options can be passed to the driver using
       the input.x11_options property since xorg-server-1.5. -->
        <!-- EXAMPLES:
        Switch on shared memory, enables the driver to be configured at runtime
	<merge key="input.x11_options.SHMConfig" type="string">true</merge>

	Maximum movement of the finger for detecting a tap
	<merge key="input.x11_options.MaxTapMove" type="string">2000</merge>

	Enable vertical scrolling when dragging along the right edge
	<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>

	Enable vertical scrolling when dragging with two fingers anywhere on the touchpad
	<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>

	Enable horizontal scrolling when dragging with two fingers anywhere on the touchpad
	<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>

	If on, circular scrolling is used
	<merge key="input.x11_options.CircularScrolling" type="string">true</merge>

	For other possible options, check CONFIGURATION DETAILS in synaptics man page
	-->
	<merge key="input.x11_options.AlwaysCore" type="string">true</merge>
	<merge key="input.x11_options.Protocol" type="string">auto-dev</merge>
	<merge key="input.x11_options.Emulate3Buttons" type="string">auto-dev</merge>
	<merge key="input.x11_options.SHMConfig" type="string">false</merge>
	<merge key="input.x11_options.LeftEdge" type="string">0</merge>-->
	<merge key="input.x11_options.RightEdge" type="string">1023</merge>
	<merge key="input.x11_options.TopEdge" type="string">767</merge>-->
	<merge key="input.x11_options.BottomEdge" type="string">0</merge>-->
	<!--<merge key="input.x11_options.SpecialScrollAreaRight" type="string">true</merge>-->
	<merge key="input.x11_options.FingerLow" type="string">25</merge>
	<merge key="input.x11_options.FingerHigh" type="string">30</merge>
	<merge key="input.x11_options.MaxTapTime" type="string">180</merge>
	<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>
	<merge key="input.x11_options.HorizEdgeScroll" type="string">true</merge>
	<merge key="input.x11_options.CornerCoasting" type="string">true</merge>
	<merge key="input.x11_options.CoastingSpeed" type="string">0.30</merge>
	<merge key="input.x11_options.VertScollDelta" type="string">100</merge>
	<merge key="input.x11_options.HorizScrollDelta" type="string">100</merge>
	<merge key="input.x11_options.MinSpeed" type="string">0.10</merge>
	<merge key="input.x11_options.MaxSpeed" type="string">0.60</merge>
	<merge key="input.x11_options.AccelFactor" type="string">0.0020</merge>
	<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
	<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
	<merge key="input.x11_options.TapButton1" type="string">1</merge>
	<merge key="input.x11_options.TapButton2" type="string">2</merge>
	<merge key="input.x11_options.TapButton3" type="string">3</merge>
    </match>
  </device>
</deviceinfo>
Merci d'avance pour votre aide.

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 09:21
par Akkion
Bonjour a toi,

Je te conseil de faire un petit tour ici :
http://aldevar.free.fr/?p=42

excelent "how to" qui devrait pouvoir t'aiguiller :)

bonne journée

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 09:32
par claudex
Bonjour,

Ce how-to n'explique pas comment faire reconnaitre mon fichier de configuration, c'est plus ou moins la même méthode que dans les wiki (anglais).

Mon problème est que le log de Xorg n'indique pas les même valeurs que mon fichier de configuration mais les valeurs du fichier par défaut.

Merci quand même.

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 10:53
par gyo
claudex a écrit :Bonjour,
Salut à toi et bienvenue :)
Voici mon log Xorg [/var/log/Xorg.0.log]
…que j’ai raccourci, pour y voir plus clair :

Code : Tout sélectionner

(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 1.0.0
(**) Option "Device" "/dev/input/event8"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(**) Option "SHMConfig" "false"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "HorizScrollDelta" "100"
(**) Option "VertEdgeScroll" "true"
(**) Option "HorizEdgeScroll" "true"
(**) Option "CornerCoasting" "true"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) Option "AlwaysCore" "true"
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event7"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
Et voici ma configuration de Hal [/etc/hal/fdi/policy/11-x11-synaptics.fdi]:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
<match key="info.product" contains="AlpsPS/2 ALPS">
<merge key="input.x11_driver" type="string">synaptics</merge>
</match>
<!-- Arbitrary options can be passed to the driver using
the input.x11_options property since xorg-server-1.5. -->

<!-- EXAMPLES:
Switch on shared memory, enables the driver to be configured at runtime
<merge key="input.x11_options.SHMConfig" type="string">true</merge>

Maximum movement of the finger for detecting a tap
<merge key="input.x11_options.MaxTapMove" type="string">2000</merge>

Enable vertical scrolling when dragging along the right edge
<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>

Enable vertical scrolling when dragging with two fingers anywhere on the touchpad
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>

Enable horizontal scrolling when dragging with two fingers anywhere on the touchpad
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>

If on, circular scrolling is used
<merge key="input.x11_options.CircularScrolling" type="string">true</merge>

For other possible options, check CONFIGURATION DETAILS in synaptics man page
-->



<merge key="input.x11_options.AlwaysCore" type="string">true</merge>
<merge key="input.x11_options.Protocol" type="string">auto-dev</merge>
<merge key="input.x11_options.Emulate3Buttons" type="string">auto-dev</merge>
<merge key="input.x11_options.SHMConfig" type="string">false</merge>
<merge key="input.x11_options.LeftEdge" type="string">0</merge>-->
<merge key="input.x11_options.RightEdge" type="string">1023</merge>
<merge key="input.x11_options.TopEdge" type="string">767</merge>-->
<merge key="input.x11_options.BottomEdge" type="string">0</merge>-->
<!--<merge key="input.x11_options.SpecialScrollAreaRight" type="string">true</merge>-->
<merge key="input.x11_options.FingerLow" type="string">25</merge>
<merge key="input.x11_options.FingerHigh" type="string">30</merge>
<merge key="input.x11_options.MaxTapTime" type="string">180</merge>
<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>
<merge key="input.x11_options.HorizEdgeScroll" type="string">true</merge>
<merge key="input.x11_options.CornerCoasting" type="string">true</merge>
<merge key="input.x11_options.CoastingSpeed" type="string">0.30</merge>
<merge key="input.x11_options.VertScollDelta" type="string">100</merge>
<merge key="input.x11_options.HorizScrollDelta" type="string">100</merge>
<merge key="input.x11_options.MinSpeed" type="string">0.10</merge>
<merge key="input.x11_options.MaxSpeed" type="string">0.60</merge>
<merge key="input.x11_options.AccelFactor" type="string">0.0020</merge>
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
</match>
</device>
</deviceinfo>
Ton fichier n’est pas valide point de vue syntaxe XML, c’est peut-être de là que vient le problème… (les trucs que j’ai mis en rouge).

[Edit]
Il est vrai que la syntaxe XML est un peu imbuvable, il faudrait un éditeur ou un validateur XML digne de ce nom (en mode console si possible)…

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 11:58
par claudex
Bonjour,

Je n'avais pas vu ces fins de commentaires, ça m'apprendra à faire du copier coller sans regarder :oops:

J'ai corriger ces fautes et maintenant mon fichier passe le validateur du W3C avec un seul warning pour manque de Doctype.

Mais ça ne marche toujours pas :pleure:

J'ai toujours le même log de Xorg même après un redémarrage de la machine. Une autre idée?

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 12:09
par tuxce
gyo a écrit :Il est vrai que la syntaxe XML est un peu imbuvable, il faudrait un éditeur ou un validateur XML digne de ce nom (en mode console si possible)…
pas plus qu'une autre et au moins, ça ne bloque pas pour un espace en plus ou en moins ;)
en plus, ce qui est pas reconnu n'est pas pris en compte, en gros, il faut juste faire gaffe à fermer toute balise ouverte dans l'ordre et ne pas utiliser < ou > en dehors des balises.

pour la validation, y a tellement d'utilitaires, personnellement, vu que j'ai gnome, j'utilise au cas où:

Code : Tout sélectionner

xmllint fichier.xml
en théorie le fichier est valable même avec les "-->" qui dépassent, par contre, il y a peut être le premier "</match>" qui est mal placé, perso je mettrais les options au même niveau que le driver..

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 15:15
par claudex
il y a peut être le premier "</match>" qui est mal placé, perso je mettrais les options au même niveau que le driver..
D'après le fichier de conf par défaut dans /usr/share/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi et le wiki anglophone ( http://wiki.archlinux.org/index.php/Touchpad_Synaptics ), c'est comme ça que ça doit être écrit.

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 15:22
par gyo
Hum, peut-être que ton fichier .fdi synaptics rentre en conflit avec un autre…

Code : Tout sélectionner

ls /etc/hal/fdi/policy/
grep -i 'alps' /etc/hal/fdi/policy/*
grep -i 'input.touchpad' /etc/hal/fdi/policy/*
?

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 15:49
par tuxce
tu peux poster la sortie de:

Code : Tout sélectionner

hal-device $(hal-find-by-capability --capability input.touchpad)

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 16:11
par claudex
Voilà le résultat des commandes:

Code : Tout sélectionner

claudex@claudex-laptop ~ $  ls /etc/hal/fdi/policy/
10-keymap.fdi  10-keymap.fdi~  11-x11-synaptics.fdi  11-x11-synaptics.fdi~

Code : Tout sélectionner

claudex@claudex-laptop ~ $  grep -i 'alps' /etc/hal/fdi/policy/*
/etc/hal/fdi/policy/11-x11-synaptics.fdi:                       <match key="info.product" contains="AlpsPS/2 ALPS">
/etc/hal/fdi/policy/11-x11-synaptics.fdi~:                      <match key="info.product" contains="AlpsPS/2 ALPS">

Code : Tout sélectionner

claudex@claudex-laptop ~ $  grep -i 'input.touchpad' /etc/hal/fdi/policy/*
/etc/hal/fdi/policy/11-x11-synaptics.fdi:               <match key="info.capabilities" contains="input.touchpad">
/etc/hal/fdi/policy/11-x11-synaptics.fdi~:              <match key="info.capabilities" contains="input.touchpad">

Code : Tout sélectionner

claudex@claudex-laptop ~ $  hal-device $(hal-find-by-capability --capability input.touchpad)                                                                   
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input_0'                                                                          
  input.x11_options.VertEdgeScroll = 'true'  (string)                           
  input.x11_options.HorizEdgeScroll = 'true'  (string)                          
  input.x11_options.CornerCoasting = 'true'  (string)                           
  input.x11_options.CoastingSpeed = '0.30'  (string)                            
  input.device = '/dev/input/event8'  (string)                                  
  input.product = 'AlpsPS/2 ALPS GlidePoint'  (string)                          
  input.x11_options.HorizScrollDelta = '100'  (string)                          
  input.x11_options.VertScollDelta = '100'  (string)                            
  input.x11_options.MaxSpeed = '0.60'  (string)
  input.x11_options.MinSpeed = '0.10'  (string)
  input.x11_options.VertTwoFingerScroll = 'true'  (string)
  input.x11_options.AccelFactor = '0.0020'  (string)
  input.x11_options.TapButton1 = '1'  (string)
  input.x11_driver = 'synaptics'  (string)
  input.x11_options.TapButton3 = '3'  (string)
  input.x11_options.TapButton2 = '2'  (string)
  input.x11_options.HorizTwoFingerScroll = 'true'  (string)
  info.subsystem = 'input'  (string)
  info.product = 'AlpsPS/2 ALPS GlidePoint'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input_0'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  input.x11_options.TopEdge = '1700'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio4/input/input8/event8'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  input.x11_options.AlwaysCore = 'true'  (string)
  input.x11_options.Protocol = 'auto-dev'  (string)
  input.x11_options.Emulate3Buttons = 'auto-dev'  (string)
  input.x11_options.SHMConfig = 'false'  (string)
  input.x11_options.LeftEdge = '1700'  (string)
  input.x11_options.RightEdge = '5300'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  info.capabilities = { 'input', 'input.mouse', 'input.touchpad' } (string list)
  info.category = 'input'  (string)
  input.x11_options.MaxTapTime = '180'  (string)
  input.x11_options.FingerLow = '25'  (string)
  input.x11_options.FingerHigh = '30'  (string)
  input.x11_options.BottomEdge = '4200'  (string)

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 16:17
par tuxce
enlève les *~ du répertoire

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 16:56
par claudex
tuxce a écrit :enlève les *~ du répertoire
ça ne change rien.

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 17:21
par tuxce
bon alors, reste plus que le fichier dans /usr/share/hal
parce que la sortie de hal-device montre qu'il y a des infos ajoutés, et par défaut, il n'y a rien d'ajouté, donc, ça provient d'un fichier, t'as modifié le /usr/share/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi avant de le copier ?

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 17:40
par claudex
Non, je ne l'ai pas modifié (sauf si c'était involontaire et que je ne l'ai pas remarqué).

Je le poste ici pour pouvoir comparer avec le fichier de quelqu'un d'autre, si personne n'a l'envie de le faire, qu'il poste son fichier et je le ferai.

Code : Tout sélectionner

<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
  <device>
    <match key="info.capabilities" contains="input.touchpad">
        <merge key="input.x11_driver" type="string">synaptics</merge>
        <!-- Arbitrary options can be passed to the driver using
             the input.x11_options property since xorg-server-1.5. -->
        <!-- EXAMPLES:
        Switch on shared memory, enables the driver to be configured at runtime
	<merge key="input.x11_options.SHMConfig" type="string">true</merge>

	Maximum movement of the finger for detecting a tap
	<merge key="input.x11_options.MaxTapMove" type="string">2000</merge>

	Enable vertical scrolling when dragging along the right edge
	<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>

	Enable vertical scrolling when dragging with two fingers anywhere on the touchpad
	<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>

	Enable horizontal scrolling when dragging with two fingers anywhere on the touchpad
	<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>

	If on, circular scrolling is used
	<merge key="input.x11_options.CircularScrolling" type="string">true</merge>

	For other possible options, check CONFIGURATION DETAILS in synaptics man page
        -->
    </match>
  </device>
</deviceinfo>

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : mer. 08 avr. 2009, 18:10
par gyo
Sinon, es-tu allé jeté un œil sur ces 2 wikis, notamment le 2e qui parle des touchpads de type ALPS :
— http://wiki.archlinux.fr/xorg/touchpad
— http://wiki.archlinux.org/index.php/Touchpad_Synaptics

:?:

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : jeu. 09 avr. 2009, 08:56
par claudex
J'ai fait des modifications mais le fichier n'est toujours pas pris en compte.

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : jeu. 09 avr. 2009, 10:57
par gyo
claudex a écrit :J'ai fait des modifications mais le fichier n'est toujours pas pris en compte.
Tu as peut-être un problème de permissions au niveau de ton .fdi ou carrément du répertoire… (ls -l /etc/hal/…, ls -ld …)

Sinon, tu peux aussi voir les logs de hal, pour voir ce que ça donne si tu as d’éventuels problèmes à la lecture de tes .fdi, ou si il lit un autre fichier .fdi pour ton touchpad (who knows)…
Apparemment la config .fdi concernant ton clavier semble bien pris en compte…

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : jeu. 09 avr. 2009, 11:18
par claudex
Pour les permissions, ce sont les même pour le fichier du clavier et celui du touchpad (et le mappage de mon clavier est bien reconnu). Mais où sont les log de hal, je ne les trouve pas?

Re: [synaptics] Défilement horizontal et vertical impossible

Publié : jeu. 09 avr. 2009, 14:41
par gyo
claudex a écrit :Pour les permissions, ce sont les même pour le fichier du clavier et celui du touchpad (et le mappage de mon clavier est bien reconnu). Mais où sont les log de hal, je ne les trouve pas?
En fait, faut lancer le service hal de cette manière :

Code : Tout sélectionner

/usr/sbin/hald --verbose=yes --daemon=no
(et donc l’avoir arrêté auparavant…)
Fuseau horaire sur UTC+02:00
Page 1 sur 1

Développé par phpBB® Forum Software © phpBB Limited

Traduction française officielle © Qiaeru