Code : Tout sélectionner
[ 11.653]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 11.653] X Protocol Version 11, Revision 0
[ 11.653] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 11.653] Current Operating System: Linux cyclope 3.3.7-1-ARCH #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012 x86_64
[ 11.653] Kernel command line: root=/dev/disk/by-uuid/98c5e8e7-5f4f-42c9-a862-a34451545813 ro
[ 11.653] Build Date: 30 May 2012 07:24:13PM
[ 11.653]
[ 11.653] Current version of pixman: 0.26.0
[ 11.653] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.653] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.653] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 1 18:03:57 2012
[ 11.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.824] (==) No Layout section. Using the first Screen section.
[ 11.824] (==) No screen section available. Using defaults.
[ 11.824] (**) |-->Screen "Default Screen Section" (0)
[ 11.824] (**) | |-->Monitor "<default monitor>"
[ 11.824] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.824] (==) Automatically adding devices
[ 11.824] (==) Automatically enabling devices
[ 11.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.858] Entry deleted from font path.
[ 11.874] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.874] Entry deleted from font path.
[ 11.874] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.874] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.874] Entry deleted from font path.
[ 11.874] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.874] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11.874] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.874] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.874] (II) Loader magic: 0x7c58e0
[ 11.874] (II) Module ABI versions:
[ 11.874] X.Org ANSI C Emulation: 0.4
[ 11.874] X.Org Video Driver: 12.0
[ 11.874] X.Org XInput driver : 16.0
[ 11.874] X.Org Server Extension : 6.0
[ 11.875] (--) PCI:*(0:4:0:0) 10de:0402:1043:825c rev 161, Mem @ 0xdf000000/16777216, 0xe0000000/268435456, 0xdc000000/33554432, I/O @ 0x0000e800/128, BIOS @ 0x????????/131072
[ 11.875] (II) Open ACPI successful (/var/run/acpid.socket)
[ 11.875] (II) LoadModule: "extmod"
[ 11.901] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.905] (II) Module extmod: vendor="X.Org Foundation"
[ 11.905] compiled for 1.12.2, module version = 1.0.0
[ 11.905] Module class: X.Org Server Extension
[ 11.905] ABI class: X.Org Server Extension, version 6.0
[ 11.905] (II) Loading extension MIT-SCREEN-SAVER
[ 11.905] (II) Loading extension XFree86-VidModeExtension
[ 11.905] (II) Loading extension XFree86-DGA
[ 11.905] (II) Loading extension DPMS
[ 11.905] (II) Loading extension XVideo
[ 11.905] (II) Loading extension XVideo-MotionCompensation
[ 11.905] (II) Loading extension X-Resource
[ 11.905] (II) LoadModule: "dbe"
[ 11.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.908] (II) Module dbe: vendor="X.Org Foundation"
[ 11.908] compiled for 1.12.2, module version = 1.0.0
[ 11.908] Module class: X.Org Server Extension
[ 11.908] ABI class: X.Org Server Extension, version 6.0
[ 11.908] (II) Loading extension DOUBLE-BUFFER
[ 11.908] (II) LoadModule: "glx"
[ 11.908] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.851] (II) Module glx: vendor="NVIDIA Corporation"
[ 12.851] compiled for 4.0.2, module version = 1.0.0
[ 12.851] Module class: X.Org Server Extension
[ 12.851] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 12.851] (II) Loading extension GLX
[ 12.851] (II) LoadModule: "record"
[ 12.852] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12.862] (II) Module record: vendor="X.Org Foundation"
[ 12.862] compiled for 1.12.2, module version = 1.13.0
[ 12.862] Module class: X.Org Server Extension
[ 12.862] ABI class: X.Org Server Extension, version 6.0
[ 12.862] (II) Loading extension RECORD
[ 12.862] (II) LoadModule: "dri"
[ 12.862] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12.876] (II) Module dri: vendor="X.Org Foundation"
[ 12.876] compiled for 1.12.2, module version = 1.0.0
[ 12.876] ABI class: X.Org Server Extension, version 6.0
[ 12.876] (II) Loading extension XFree86-DRI
[ 12.876] (II) LoadModule: "dri2"
[ 12.876] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.882] (II) Module dri2: vendor="X.Org Foundation"
[ 12.882] compiled for 1.12.2, module version = 1.2.0
[ 12.882] ABI class: X.Org Server Extension, version 6.0
[ 12.882] (II) Loading extension DRI2
[ 12.882] (==) Matched nouveau as autoconfigured driver 0
[ 12.882] (==) Matched nvidia as autoconfigured driver 1
[ 12.882] (==) Matched nv as autoconfigured driver 2
[ 12.882] (==) Matched vesa as autoconfigured driver 3
[ 12.882] (==) Matched fbdev as autoconfigured driver 4
[ 12.882] (==) Assigned the driver to the xf86ConfigLayout
[ 12.882] (II) LoadModule: "nouveau"
[ 12.892] (WW) Warning, couldn't open module nouveau
[ 12.892] (II) UnloadModule: "nouveau"
[ 12.892] (II) Unloading nouveau
[ 12.892] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 12.892] (II) LoadModule: "nvidia"
[ 12.893] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12.959] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12.959] compiled for 4.0.2, module version = 1.0.0
[ 12.959] Module class: X.Org Video Driver
[ 12.972] (II) LoadModule: "nv"
[ 12.973] (WW) Warning, couldn't open module nv
[ 12.973] (II) UnloadModule: "nv"
[ 12.973] (II) Unloading nv
[ 12.973] (EE) Failed to load module "nv" (module does not exist, 0)
[ 12.973] (II) LoadModule: "vesa"
[ 12.973] (WW) Warning, couldn't open module vesa
[ 12.973] (II) UnloadModule: "vesa"
[ 12.973] (II) Unloading vesa
[ 12.973] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 12.973] (II) LoadModule: "fbdev"
[ 12.973] (WW) Warning, couldn't open module fbdev
[ 12.973] (II) UnloadModule: "fbdev"
[ 12.973] (II) Unloading fbdev
[ 12.973] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 12.973] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
[ 12.973] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12.980] (++) using VT number 7
[ 12.982] (II) Loading sub module "fb"
[ 12.982] (II) LoadModule: "fb"
[ 12.982] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.992] (II) Module fb: vendor="X.Org Foundation"
[ 12.992] compiled for 1.12.2, module version = 1.0.0
[ 12.992] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.992] (II) Loading sub module "wfb"
[ 12.992] (II) LoadModule: "wfb"
[ 12.992] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.000] (II) Module wfb: vendor="X.Org Foundation"
[ 13.000] compiled for 1.12.2, module version = 1.0.0
[ 13.000] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.000] (II) Loading sub module "ramdac"
[ 13.000] (II) LoadModule: "ramdac"
[ 13.000] (II) Module "ramdac" already built-in
[ 13.022] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.022] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 13.023] (==) NVIDIA(0): RGB weight 888
[ 13.023] (==) NVIDIA(0): Default visual is TrueColor
[ 13.023] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.023] (**) NVIDIA(0): Enabling 2D acceleration
[ 14.307] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 14.312] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:4:0:0 (GPU-0)
[ 14.312] (--) NVIDIA(0): Memory: 524288 kBytes
[ 14.312] (--) NVIDIA(0): VideoBIOS: 60.84.61.00.00
[ 14.312] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.312] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 14.316] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:4:0:0
[ 14.316] (--) NVIDIA(0): CRT-1
[ 14.316] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 14.349] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.349] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 14.349] (**) NVIDIA(0): all display devices.)
[ 14.351] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 14.351] (==) NVIDIA(0):
[ 14.351] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 14.351] (==) NVIDIA(0): will be used as the requested mode.
[ 14.351] (==) NVIDIA(0):
[ 14.352] (II) NVIDIA(0): Validated modes:
[ 14.352] (II) NVIDIA(0): "nvidia-auto-select"
[ 14.352] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 14.377] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 14.377] (WW) NVIDIA(0): from CRT-1's EDID.
[ 14.377] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 14.377] (--) Depth 24 pixmap format is 32 bpp
[ 14.377] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 14.386] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 14.434] (II) Loading extension NV-GLX
[ 14.463] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14.463] (==) NVIDIA(0): Backing store disabled
[ 14.463] (==) NVIDIA(0): Silken mouse enabled
[ 14.464] (==) NVIDIA(0): DPMS enabled
[ 14.464] (II) Loading extension NV-CONTROL
[ 14.464] (II) Loading extension XINERAMA
[ 14.464] (II) Loading sub module "dri2"
[ 14.464] (II) LoadModule: "dri2"
[ 14.464] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.464] (II) Module dri2: vendor="X.Org Foundation"
[ 14.464] compiled for 1.12.2, module version = 1.2.0
[ 14.464] ABI class: X.Org Server Extension, version 6.0
[ 14.464] (II) NVIDIA(0): [DRI2] Setup complete
[ 14.464] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.464] (==) RandR enabled
[ 14.464] (II) Initializing built-in extension Generic Event Extension
[ 14.464] (II) Initializing built-in extension SHAPE
[ 14.464] (II) Initializing built-in extension MIT-SHM
[ 14.464] (II) Initializing built-in extension XInputExtension
[ 14.464] (II) Initializing built-in extension XTEST
[ 14.464] (II) Initializing built-in extension BIG-REQUESTS
[ 14.464] (II) Initializing built-in extension SYNC
[ 14.464] (II) Initializing built-in extension XKEYBOARD
[ 14.464] (II) Initializing built-in extension XC-MISC
[ 14.464] (II) Initializing built-in extension SECURITY
[ 14.464] (II) Initializing built-in extension XINERAMA
[ 14.464] (II) Initializing built-in extension XFIXES
[ 14.464] (II) Initializing built-in extension RENDER
[ 14.464] (II) Initializing built-in extension RANDR
[ 14.464] (II) Initializing built-in extension COMPOSITE
[ 14.464] (II) Initializing built-in extension DAMAGE
[ 14.466] (II) Initializing extension GLX
[ 14.774] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 14.774] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.774] (II) LoadModule: "evdev"
[ 14.774] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.795] (II) Module evdev: vendor="X.Org Foundation"
[ 14.795] compiled for 1.12.0, module version = 2.7.0
[ 14.795] Module class: X.Org XInput Driver
[ 14.795] ABI class: X.Org XInput driver, version 16.0
[ 14.795] (II) Using input driver 'evdev' for 'Power Button'
[ 14.795] (**) Power Button: always reports core events
[ 14.795] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 14.795] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.795] (--) evdev: Power Button: Found keys
[ 14.795] (II) evdev: Power Button: Configuring as keyboard
[ 14.795] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 14.795] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.795] (**) Option "xkb_rules" "evdev"
[ 14.795] (**) Option "xkb_model" "evdev"
[ 14.795] (**) Option "xkb_layout" "us"
[ 14.817] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 14.817] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.817] (II) Using input driver 'evdev' for 'Power Button'
[ 14.817] (**) Power Button: always reports core events
[ 14.817] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 14.817] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.817] (--) evdev: Power Button: Found keys
[ 14.817] (II) evdev: Power Button: Configuring as keyboard
[ 14.817] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 14.817] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.817] (**) Option "xkb_rules" "evdev"
[ 14.817] (**) Option "xkb_model" "evdev"
[ 14.817] (**) Option "xkb_layout" "us"
[ 14.817] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event3)
[ 14.817] (II) No input driver specified, ignoring this device.
[ 14.817] (II) This device may have been added with another device file.
[ 14.817] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event4)
[ 14.817] (II) No input driver specified, ignoring this device.
[ 14.817] (II) This device may have been added with another device file.
[ 14.818] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event5)
[ 14.818] (II) No input driver specified, ignoring this device.
[ 14.818] (II) This device may have been added with another device file.
[ 14.818] (II) config/udev: Adding input device zc3xx (/dev/input/event10)
[ 14.818] (**) zc3xx: Applying InputClass "evdev keyboard catchall"
[ 14.818] (II) Using input driver 'evdev' for 'zc3xx'
[ 14.818] (**) zc3xx: always reports core events
[ 14.818] (**) evdev: zc3xx: Device: "/dev/input/event10"
[ 14.818] (--) evdev: zc3xx: Vendor 0x46d Product 0x8ad
[ 14.818] (--) evdev: zc3xx: Found keys
[ 14.818] (II) evdev: zc3xx: Configuring as keyboard
[ 14.818] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input10/event10"
[ 14.818] (II) XINPUT: Adding extended input device "zc3xx" (type: KEYBOARD, id 8)
[ 14.818] (**) Option "xkb_rules" "evdev"
[ 14.818] (**) Option "xkb_model" "evdev"
[ 14.818] (**) Option "xkb_layout" "us"
[ 14.819] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event6)
[ 14.819] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.819] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 14.819] (**) Logitech Logitech USB Keyboard: always reports core events
[ 14.819] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event6"
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc308
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 14.819] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 14.819] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6/event6"
[ 14.819] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 14.819] (**) Option "xkb_rules" "evdev"
[ 14.819] (**) Option "xkb_model" "evdev"
[ 14.819] (**) Option "xkb_layout" "us"
[ 14.819] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event7)
[ 14.819] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 14.819] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.819] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 14.819] (**) Logitech Logitech USB Keyboard: always reports core events
[ 14.819] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event7"
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc308
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Found 20 mouse buttons
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Found scroll wheel(s)
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Found relative axes
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Found x and y relative axes
[ 14.819] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 14.819] (II) evdev: Logitech Logitech USB Keyboard: Configuring as mouse
[ 14.819] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 14.819] (II) evdev: Logitech Logitech USB Keyboard: Adding scrollwheel support
[ 14.819] (**) evdev: Logitech Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 14.819] (**) evdev: Logitech Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.819] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input7/event7"
[ 14.819] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 14.819] (**) Option "xkb_rules" "evdev"
[ 14.819] (**) Option "xkb_model" "evdev"
[ 14.819] (**) Option "xkb_layout" "us"
[ 14.828] (II) evdev: Logitech Logitech USB Keyboard: initialized for relative axes.
[ 14.829] (**) Logitech Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 14.829] (**) Logitech Logitech USB Keyboard: (accel) acceleration profile 0
[ 14.829] (**) Logitech Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 14.829] (**) Logitech Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 14.829] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/mouse0)
[ 14.829] (II) No input driver specified, ignoring this device.
[ 14.829] (II) This device may have been added with another device file.
[ 14.829] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event8)
[ 14.829] (**) Logitech G9 Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 14.829] (II) Using input driver 'evdev' for 'Logitech G9 Laser Mouse'
[ 14.829] (**) Logitech G9 Laser Mouse: always reports core events
[ 14.829] (**) evdev: Logitech G9 Laser Mouse: Device: "/dev/input/event8"
[ 14.829] (--) evdev: Logitech G9 Laser Mouse: Vendor 0x46d Product 0xc048
[ 14.829] (--) evdev: Logitech G9 Laser Mouse: Found 20 mouse buttons
[ 14.829] (--) evdev: Logitech G9 Laser Mouse: Found scroll wheel(s)
[ 14.829] (--) evdev: Logitech G9 Laser Mouse: Found relative axes
[ 14.829] (--) evdev: Logitech G9 Laser Mouse: Found x and y relative axes
[ 14.829] (II) evdev: Logitech G9 Laser Mouse: Configuring as mouse
[ 14.829] (II) evdev: Logitech G9 Laser Mouse: Adding scrollwheel support
[ 14.829] (**) evdev: Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
[ 14.829] (**) evdev: Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.829] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input8/event8"
[ 14.829] (II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse" (type: MOUSE, id 11)
[ 14.830] (II) evdev: Logitech G9 Laser Mouse: initialized for relative axes.
[ 14.830] (**) Logitech G9 Laser Mouse: (accel) keeping acceleration scheme 1
[ 14.830] (**) Logitech G9 Laser Mouse: (accel) acceleration profile 0
[ 14.830] (**) Logitech G9 Laser Mouse: (accel) acceleration factor: 2.000
[ 14.830] (**) Logitech G9 Laser Mouse: (accel) acceleration threshold: 4
[ 14.830] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/mouse1)
[ 14.830] (II) No input driver specified, ignoring this device.
[ 14.830] (II) This device may have been added with another device file.
[ 14.830] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event9)
[ 14.830] (**) Logitech G9 Laser Mouse: Applying InputClass "evdev keyboard catchall"
[ 14.830] (II) Using input driver 'evdev' for 'Logitech G9 Laser Mouse'
[ 14.830] (**) Logitech G9 Laser Mouse: always reports core events
[ 14.830] (**) evdev: Logitech G9 Laser Mouse: Device: "/dev/input/event9"
[ 14.830] (--) evdev: Logitech G9 Laser Mouse: Vendor 0x46d Product 0xc048
[ 14.830] (--) evdev: Logitech G9 Laser Mouse: Found 1 mouse buttons
[ 14.830] (--) evdev: Logitech G9 Laser Mouse: Found scroll wheel(s)
[ 14.830] (--) evdev: Logitech G9 Laser Mouse: Found relative axes
[ 14.830] (II) evdev: Logitech G9 Laser Mouse: Forcing relative x/y axes to exist.
[ 14.830] (--) evdev: Logitech G9 Laser Mouse: Found absolute axes
[ 14.830] (II) evdev: Logitech G9 Laser Mouse: Forcing absolute x/y axes to exist.
[ 14.830] (--) evdev: Logitech G9 Laser Mouse: Found keys
[ 14.830] (II) evdev: Logitech G9 Laser Mouse: Configuring as mouse
[ 14.830] (II) evdev: Logitech G9 Laser Mouse: Configuring as keyboard
[ 14.830] (II) evdev: Logitech G9 Laser Mouse: Adding scrollwheel support
[ 14.830] (**) evdev: Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
[ 14.830] (**) evdev: Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.830] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input9/event9"
[ 14.830] (II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse" (type: KEYBOARD, id 12)
[ 14.830] (**) Option "xkb_rules" "evdev"
[ 14.830] (**) Option "xkb_model" "evdev"
[ 14.830] (**) Option "xkb_layout" "us"
[ 14.831] (II) evdev: Logitech G9 Laser Mouse: initialized for relative axes.
[ 14.831] (WW) evdev: Logitech G9 Laser Mouse: ignoring absolute axes.
[ 14.831] (**) Logitech G9 Laser Mouse: (accel) keeping acceleration scheme 1
[ 14.831] (**) Logitech G9 Laser Mouse: (accel) acceleration profile 0
[ 14.831] (**) Logitech G9 Laser Mouse: (accel) acceleration factor: 2.000
[ 14.831] (**) Logitech G9 Laser Mouse: (accel) acceleration threshold: 4
[ 14.831] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 14.831] (II) No input driver specified, ignoring this device.
[ 14.831] (II) This device may have been added with another device file.
[ 20.866] (II) evdev: Power Button: Close
[ 20.866] (II) UnloadModule: "evdev"
[ 20.866] (II) evdev: Power Button: Close
[ 20.866] (II) UnloadModule: "evdev"
[ 20.867] (II) evdev: zc3xx: Close
[ 20.867] (II) UnloadModule: "evdev"
[ 20.867] (II) evdev: Logitech Logitech USB Keyboard: Close
[ 20.867] (II) UnloadModule: "evdev"
[ 20.867] (II) evdev: Logitech Logitech USB Keyboard: Close
[ 20.867] (II) UnloadModule: "evdev"
[ 20.868] (II) evdev: Logitech G9 Laser Mouse: Close
[ 20.868] (II) UnloadModule: "evdev"
[ 20.868] (II) evdev: Logitech G9 Laser Mouse: Close
[ 20.868] (II) UnloadModule: "evdev"
[ 21.036] 1 XSELINUXs still allocated at reset
[ 21.036] SCREEN: 0 objects of 296 bytes = 0 total bytes 0 private allocs
[ 21.036] COLORMAP: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 21.036] DEVICE: 0 objects of 96 bytes = 0 total bytes 0 private allocs
[ 21.036] CLIENT: 0 objects of 128 bytes = 0 total bytes 0 private allocs
[ 21.036] WINDOW: 0 objects of 80 bytes = 0 total bytes 0 private allocs
[ 21.036] PIXMAP: 1 objects of 112 bytes = 112 total bytes 0 private allocs
[ 21.036] GC: 0 objects of 80 bytes = 0 total bytes 0 private allocs
[ 21.036] CURSOR: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 21.036] CURSOR_BITS: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 21.036] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[ 21.036] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[ 21.036] SYNC_FENCE: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 21.036] TOTAL: 1 objects, 112 bytes, 0 allocs
[ 21.036] 1 PIXMAPs still allocated at reset
[ 21.036] PIXMAP: 1 objects of 112 bytes = 112 total bytes 0 private allocs
[ 21.036] GC: 0 objects of 80 bytes = 0 total bytes 0 private allocs
[ 21.036] CURSOR: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 21.036] CURSOR_BITS: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 21.036] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[ 21.036] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[ 21.036] SYNC_FENCE: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 21.036] TOTAL: 1 objects, 112 bytes, 0 allocs
[ 21.037] (II) Open ACPI successful (/var/run/acpid.socket)
[ 21.037] (II) APM registered successfully
[ 21.046] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 21.118] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 21.118] (==) NVIDIA(0): DPMS enabled
[ 21.119] (II) Loading sub module "dri2"
[ 21.119] (II) LoadModule: "dri2"
[ 21.119] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 21.119] (II) Module dri2: vendor="X.Org Foundation"
[ 21.119] compiled for 1.12.2, module version = 1.2.0
[ 21.119] ABI class: X.Org Server Extension, version 6.0
[ 21.119] (II) NVIDIA(0): [DRI2] Setup complete
[ 21.119] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 21.119] (==) RandR enabled
[ 21.120] (II) Initializing extension GLX
[ 21.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 21.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.161] (II) Using input driver 'evdev' for 'Power Button'
[ 21.161] (**) Power Button: always reports core events
[ 21.161] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 21.161] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.161] (--) evdev: Power Button: Found keys
[ 21.161] (II) evdev: Power Button: Configuring as keyboard
[ 21.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 21.161] (**) Option "xkb_rules" "evdev"
[ 21.161] (**) Option "xkb_model" "evdev"
[ 21.161] (**) Option "xkb_layout" "us"
[ 21.183] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.183] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.183] (II) Using input driver 'evdev' for 'Power Button'
[ 21.183] (**) Power Button: always reports core events
[ 21.183] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 21.183] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.183] (--) evdev: Power Button: Found keys
[ 21.183] (II) evdev: Power Button: Configuring as keyboard
[ 21.183] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 21.183] (**) Option "xkb_rules" "evdev"
[ 21.183] (**) Option "xkb_model" "evdev"
[ 21.183] (**) Option "xkb_layout" "us"
[ 21.183] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event3)
[ 21.183] (II) No input driver specified, ignoring this device.
[ 21.183] (II) This device may have been added with another device file.
[ 21.183] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event4)
[ 21.183] (II) No input driver specified, ignoring this device.
[ 21.183] (II) This device may have been added with another device file.
[ 21.184] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event5)
[ 21.184] (II) No input driver specified, ignoring this device.
[ 21.184] (II) This device may have been added with another device file.
[ 21.184] (II) config/udev: Adding input device zc3xx (/dev/input/event10)
[ 21.184] (**) zc3xx: Applying InputClass "evdev keyboard catchall"
[ 21.184] (II) Using input driver 'evdev' for 'zc3xx'
[ 21.184] (**) zc3xx: always reports core events
[ 21.184] (**) evdev: zc3xx: Device: "/dev/input/event10"
[ 21.184] (--) evdev: zc3xx: Vendor 0x46d Product 0x8ad
[ 21.184] (--) evdev: zc3xx: Found keys
[ 21.184] (II) evdev: zc3xx: Configuring as keyboard
[ 21.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input10/event10"
[ 21.184] (**) Option "xkb_rules" "evdev"
[ 21.184] (**) Option "xkb_model" "evdev"
[ 21.184] (**) Option "xkb_layout" "us"
[ 21.184] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event6)
[ 21.184] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.184] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 21.184] (**) Logitech Logitech USB Keyboard: always reports core events
[ 21.184] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event6"
[ 21.184] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc308
[ 21.184] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 21.184] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 21.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6/event6"
[ 21.184] (**) Option "xkb_rules" "evdev"
[ 21.184] (**) Option "xkb_model" "evdev"
[ 21.185] (**) Option "xkb_layout" "us"
[ 21.185] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event7)
[ 21.185] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 21.185] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.185] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 21.185] (**) Logitech Logitech USB Keyboard: always reports core events
[ 21.185] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event7"
[ 21.185] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc308
[ 21.185] (--) evdev: Logitech Logitech USB Keyboard: Found 20 mouse buttons
[ 21.185] (--) evdev: Logitech Logitech USB Keyboard: Found scroll wheel(s)
[ 21.185] (--) evdev: Logitech Logitech USB Keyboard: Found relative axes
[ 21.185] (--) evdev: Logitech Logitech USB Keyboard: Found x and y relative axes
[ 21.185] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 21.185] (II) evdev: Logitech Logitech USB Keyboard: Configuring as mouse
[ 21.185] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 21.185] (II) evdev: Logitech Logitech USB Keyboard: Adding scrollwheel support
[ 21.185] (**) evdev: Logitech Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 21.185] (**) evdev: Logitech Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.185] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input7/event7"
[ 21.185] (**) Option "xkb_rules" "evdev"
[ 21.185] (**) Option "xkb_model" "evdev"
[ 21.185] (**) Option "xkb_layout" "us"
[ 21.185] (II) evdev: Logitech Logitech USB Keyboard: initialized for relative axes.
[ 21.186] (**) Logitech Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 21.186] (**) Logitech Logitech USB Keyboard: (accel) acceleration profile 0
[ 21.186] (**) Logitech Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 21.186] (**) Logitech Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 21.186] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/mouse0)
[ 21.186] (II) No input driver specified, ignoring this device.
[ 21.186] (II) This device may have been added with another device file.
[ 21.186] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event8)
[ 21.186] (**) Logitech G9 Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 21.186] (II) Using input driver 'evdev' for 'Logitech G9 Laser Mouse'
[ 21.186] (**) Logitech G9 Laser Mouse: always reports core events
[ 21.186] (**) evdev: Logitech G9 Laser Mouse: Device: "/dev/input/event8"
[ 21.186] (--) evdev: Logitech G9 Laser Mouse: Vendor 0x46d Product 0xc048
[ 21.186] (--) evdev: Logitech G9 Laser Mouse: Found 20 mouse buttons
[ 21.186] (--) evdev: Logitech G9 Laser Mouse: Found scroll wheel(s)
[ 21.186] (--) evdev: Logitech G9 Laser Mouse: Found relative axes
[ 21.186] (--) evdev: Logitech G9 Laser Mouse: Found x and y relative axes
[ 21.186] (II) evdev: Logitech G9 Laser Mouse: Configuring as mouse
[ 21.186] (II) evdev: Logitech G9 Laser Mouse: Adding scrollwheel support
[ 21.186] (**) evdev: Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
[ 21.186] (**) evdev: Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input8/event8"
[ 21.186] (II) evdev: Logitech G9 Laser Mouse: initialized for relative axes.
[ 21.186] (**) Logitech G9 Laser Mouse: (accel) keeping acceleration scheme 1
[ 21.187] (**) Logitech G9 Laser Mouse: (accel) acceleration profile 0
[ 21.187] (**) Logitech G9 Laser Mouse: (accel) acceleration factor: 2.000
[ 21.187] (**) Logitech G9 Laser Mouse: (accel) acceleration threshold: 4
[ 21.187] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/mouse1)
[ 21.187] (II) No input driver specified, ignoring this device.
[ 21.187] (II) This device may have been added with another device file.
[ 21.187] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event9)
[ 21.187] (**) Logitech G9 Laser Mouse: Applying InputClass "evdev keyboard catchall"
[ 21.187] (II) Using input driver 'evdev' for 'Logitech G9 Laser Mouse'
[ 21.187] (**) Logitech G9 Laser Mouse: always reports core events
[ 21.187] (**) evdev: Logitech G9 Laser Mouse: Device: "/dev/input/event9"
[ 21.187] (--) evdev: Logitech G9 Laser Mouse: Vendor 0x46d Product 0xc048
[ 21.187] (--) evdev: Logitech G9 Laser Mouse: Found 1 mouse buttons
[ 21.187] (--) evdev: Logitech G9 Laser Mouse: Found scroll wheel(s)
[ 21.187] (--) evdev: Logitech G9 Laser Mouse: Found relative axes
[ 21.187] (II) evdev: Logitech G9 Laser Mouse: Forcing relative x/y axes to exist.
[ 21.187] (--) evdev: Logitech G9 Laser Mouse: Found absolute axes
[ 21.187] (II) evdev: Logitech G9 Laser Mouse: Forcing absolute x/y axes to exist.
[ 21.187] (--) evdev: Logitech G9 Laser Mouse: Found keys
[ 21.187] (II) evdev: Logitech G9 Laser Mouse: Configuring as mouse
[ 21.187] (II) evdev: Logitech G9 Laser Mouse: Configuring as keyboard
[ 21.187] (II) evdev: Logitech G9 Laser Mouse: Adding scrollwheel support
[ 21.187] (**) evdev: Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
[ 21.187] (**) evdev: Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.187] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input9/event9"
[ 21.187] (**) Option "xkb_rules" "evdev"
[ 21.187] (**) Option "xkb_model" "evdev"
[ 21.187] (**) Option "xkb_layout" "us"
[ 21.187] (II) evdev: Logitech G9 Laser Mouse: initialized for relative axes.
[ 21.187] (WW) evdev: Logitech G9 Laser Mouse: ignoring absolute axes.
[ 21.188] (**) Logitech G9 Laser Mouse: (accel) keeping acceleration scheme 1
[ 21.188] (**) Logitech G9 Laser Mouse: (accel) acceleration profile 0
[ 21.188] (**) Logitech G9 Laser Mouse: (accel) acceleration factor: 2.000
[ 21.188] (**) Logitech G9 Laser Mouse: (accel) acceleration threshold: 4
[ 21.188] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 21.188] (II) No input driver specified, ignoring this device.
[ 21.188] (II) This device may have been added with another device file.
