Archlinux.fr [Forums]

Forum d'entraide ! Posez vos questions ici
https://forums.archlinux.fr/

[environnement graphique] blocage aléatoire

https://forums.archlinux.fr/viewtopic.php?t=11351

Page 1 sur 1

[environnement graphique] blocage aléatoire

Publié : mer. 04 juil. 2012, 16:32
par genesis66
Bonjour a tous,

Je suis nouveau sur archlinux. J'ai installé un poste sous architecture 64bits. Jusque la tout va bien, a part quelques soucis rencontrés à la premiere mise a jour avec filesystem. Bref, ma configuration est simple, quelques daemons sont lancés par le rc.conf (httpd, irqbalance,mysql...) et je me connecte via tty1 puis je lance mon environnement de bureau (KDE) via startx.tout fonctionne correctement, du moins en apparence, car en fait le pc bloque aléatoirement 3 a 4 fois par jour. Je n'ai pas réussi a identifer l'origine du plantage et c'est pour m'aider a diagnostiquer et réparer tout cela que je vous soumets mon probleme.
Je précise que lors du plantage, j'ai d'abord la souris qui continue a etre "réactive" pendant quelques instants mais impossible de passer d'une fenetre a l'autre, en fait a part bouger la souris a l'ecran, je ne peux plus rien faire, puis la souris se bloque, et la il n'y a plus qu'a eteindre le poste a l'arrache et a redemarré le tout. Evidemment, le passage en console ne fonctionne pas non plus (ctrl+alt+F1).
Je penche pour un bug sur KDE, mais je ne suis pas certain, et surtout j'aimerai savoir ou regarder (quels logs) pour comprendre l'origine du plantage.
En attendant, je vais essayer un autre environnement graphique (XFCE4) et voir si le plantage continue.
D'avance merci pour vos remarques et contributions a venir

Re: blocage aléatoire

Publié : mer. 04 juil. 2012, 16:43
par benjarobin
Bonjour,

Merci de corriger le titre de ton sujet.
Sinon je mise 100 contre 1 que le problème vient de ton driver graphique et non de KDE.
Si KDE possède un problème il n'interdira en aucun cas le passage dans les autres consoles tty.

Donc il nous faudrait beaucoup plus de détail:
- Ta configuration
- Le log de Xorg (/var/log/...)
- La fin de everything.log (1 min avant les ralentissement jusqu’à l’extinction)
- Le log de session (.xsession-errors)
- Comment tu lances KDE (.xinitrc)
- Ton rc.conf

Re: [environnement graphique] blocage aléatoire

Publié : mer. 04 juil. 2012, 17:42
par genesis66
j'ai installé le driver nvidia via pacman : les paquets nvidia installé sont :
nvidia
nvidia-utils
libvdpau

mon xinitrc :

Code : Tout sélectionner

#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)

if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi

# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec ck-launch-session startkde
pour le rc.conf : voici les modules et les daemons :

Code : Tout sélectionner

DAEMONS=(hwclock syslog-ng dbus irqbalance alsa network sshd sensors mysqld httpd netfs crond bluetooth)
MODULES=(vboxdrv vboxnetflt)
pas de fichier .xsession-errors dans mon home
pour le everything.log, il va falloir que j'attende le prochain plantage, parce que la il y a un peu trop de logs !
enfin pour le /var/log/Xorg :

Code : Tout sélectionner

[   111.441] 
X.Org X Server 1.12.2
Release Date: 2012-05-29
[   111.441] X Protocol Version 11, Revision 0
[   111.441] Build Operating System: Linux 3.0.32-1-lts x86_64 
[   111.442] Current Operating System: Linux reborn 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012 x86_64
[   111.442] Kernel command line: root=/dev/disk/by-uuid/727d4754-0a5d-431b-8bcd-e3c493e58706 ro
[   111.442] Build Date: 30 May 2012  07:24:13PM
[   111.442]  
[   111.442] Current version of pixman: 0.26.2
[   111.442] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   111.442] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   111.443] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul  4 17:05:45 2012
[   111.472] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   111.486] (==) No Layout section.  Using the first Screen section.
[   111.486] (==) No screen section available. Using defaults.
[   111.486] (**) |-->Screen "Default Screen Section" (0)
[   111.486] (**) |   |-->Monitor "<default monitor>"
[   111.486] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   111.486] (==) Automatically adding devices
[   111.486] (==) Automatically enabling devices
[   111.532] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   111.532] 	Entry deleted from font path.
[   111.551] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   111.551] 	Entry deleted from font path.
[   111.551] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   111.551] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   111.551] 	Entry deleted from font path.
[   111.551] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   111.551] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   111.551] (==) ModulePath set to "/usr/lib/xorg/modules"
[   111.551] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   111.551] (II) Loader magic: 0x7c58e0
[   111.551] (II) Module ABI versions:
[   111.551] 	X.Org ANSI C Emulation: 0.4
[   111.551] 	X.Org Video Driver: 12.0
[   111.551] 	X.Org XInput driver : 16.0
[   111.551] 	X.Org Server Extension : 6.0
[   111.552] (--) PCI:*(0:5:0:0) 10de:0391:10de:033d rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[   111.552] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   111.552] (II) LoadModule: "extmod"
[   111.552] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   111.566] (II) Module extmod: vendor="X.Org Foundation"
[   111.566] 	compiled for 1.12.2, module version = 1.0.0
[   111.566] 	Module class: X.Org Server Extension
[   111.566] 	ABI class: X.Org Server Extension, version 6.0
[   111.566] (II) Loading extension MIT-SCREEN-SAVER
[   111.566] (II) Loading extension XFree86-VidModeExtension
[   111.566] (II) Loading extension XFree86-DGA
[   111.566] (II) Loading extension DPMS
[   111.566] (II) Loading extension XVideo
[   111.566] (II) Loading extension XVideo-MotionCompensation
[   111.566] (II) Loading extension X-Resource
[   111.566] (II) LoadModule: "dbe"
[   111.566] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   111.567] (II) Module dbe: vendor="X.Org Foundation"
[   111.567] 	compiled for 1.12.2, module version = 1.0.0
[   111.567] 	Module class: X.Org Server Extension
[   111.567] 	ABI class: X.Org Server Extension, version 6.0
[   111.567] (II) Loading extension DOUBLE-BUFFER
[   111.567] (II) LoadModule: "glx"
[   111.567] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   112.147] (II) Module glx: vendor="NVIDIA Corporation"
[   112.147] 	compiled for 4.0.2, module version = 1.0.0
[   112.147] 	Module class: X.Org Server Extension
[   112.147] (II) NVIDIA GLX Module  302.17  Tue Jun 12 16:22:45 PDT 2012
[   112.147] (II) Loading extension GLX
[   112.147] (II) LoadModule: "record"
[   112.147] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   112.148] (II) Module record: vendor="X.Org Foundation"
[   112.148] 	compiled for 1.12.2, module version = 1.13.0
[   112.148] 	Module class: X.Org Server Extension
[   112.148] 	ABI class: X.Org Server Extension, version 6.0
[   112.148] (II) Loading extension RECORD
[   112.148] (II) LoadModule: "dri"
[   112.148] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   112.150] (II) Module dri: vendor="X.Org Foundation"
[   112.150] 	compiled for 1.12.2, module version = 1.0.0
[   112.150] 	ABI class: X.Org Server Extension, version 6.0
[   112.150] (II) Loading extension XFree86-DRI
[   112.150] (II) LoadModule: "dri2"
[   112.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   112.150] (II) Module dri2: vendor="X.Org Foundation"
[   112.150] 	compiled for 1.12.2, module version = 1.2.0
[   112.150] 	ABI class: X.Org Server Extension, version 6.0
[   112.150] (II) Loading extension DRI2
[   112.150] (==) Matched nouveau as autoconfigured driver 0
[   112.150] (==) Matched nvidia as autoconfigured driver 1
[   112.150] (==) Matched nv as autoconfigured driver 2
[   112.150] (==) Matched vesa as autoconfigured driver 3
[   112.150] (==) Matched fbdev as autoconfigured driver 4
[   112.150] (==) Assigned the driver to the xf86ConfigLayout
[   112.150] (II) LoadModule: "nouveau"
[   112.151] (WW) Warning, couldn't open module nouveau
[   112.151] (II) UnloadModule: "nouveau"
[   112.151] (II) Unloading nouveau
[   112.151] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   112.151] (II) LoadModule: "nvidia"
[   112.151] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   112.267] (II) Module nvidia: vendor="NVIDIA Corporation"
[   112.267] 	compiled for 4.0.2, module version = 1.0.0
[   112.267] 	Module class: X.Org Video Driver
[   112.272] (II) LoadModule: "nv"
[   112.272] (WW) Warning, couldn't open module nv
[   112.272] (II) UnloadModule: "nv"
[   112.272] (II) Unloading nv
[   112.272] (EE) Failed to load module "nv" (module does not exist, 0)
[   112.272] (II) LoadModule: "vesa"
[   112.273] (WW) Warning, couldn't open module vesa
[   112.273] (II) UnloadModule: "vesa"
[   112.273] (II) Unloading vesa
[   112.273] (EE) Failed to load module "vesa" (module does not exist, 0)
[   112.273] (II) LoadModule: "fbdev"
[   112.273] (WW) Warning, couldn't open module fbdev
[   112.273] (II) UnloadModule: "fbdev"
[   112.273] (II) Unloading fbdev
[   112.273] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   112.273] (II) NVIDIA dlloader X Driver  302.17  Tue Jun 12 16:04:53 PDT 2012
[   112.273] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   112.273] (--) using VT number 7

[   112.278] (II) Loading sub module "fb"
[   112.278] (II) LoadModule: "fb"
[   112.279] (II) Loading /usr/lib/xorg/modules/libfb.so
[   112.285] (II) Module fb: vendor="X.Org Foundation"
[   112.285] 	compiled for 1.12.2, module version = 1.0.0
[   112.285] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   112.285] (II) Loading sub module "wfb"
[   112.285] (II) LoadModule: "wfb"
[   112.285] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   112.286] (II) Module wfb: vendor="X.Org Foundation"
[   112.286] 	compiled for 1.12.2, module version = 1.0.0
[   112.286] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   112.286] (II) Loading sub module "ramdac"
[   112.286] (II) LoadModule: "ramdac"
[   112.286] (II) Module "ramdac" already built-in
[   112.288] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   112.288] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   112.288] (==) NVIDIA(0): RGB weight 888
[   112.288] (==) NVIDIA(0): Default visual is TrueColor
[   112.288] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   112.288] (**) NVIDIA(0): Enabling 2D acceleration
[   113.537] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS MK221 (CRT-0)) does not
[   113.537] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   113.539] (II) NVIDIA(0): NVIDIA GPU GeForce 7600 GT (G73) at PCI:5:0:0 (GPU-0)
[   113.539] (--) NVIDIA(0): Memory: 262144 kBytes
[   113.539] (--) NVIDIA(0): VideoBIOS: 05.73.22.15.01
[   113.539] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   113.539] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[   113.539] (--) NVIDIA(0): Valid display device(s) on GeForce 7600 GT at PCI:5:0:0
[   113.539] (--) NVIDIA(0):     Ancor Communications Inc ASUS MK221 (CRT-0) (connected)
[   113.539] (--) NVIDIA(0):     CRT-1
[   113.539] (--) NVIDIA(0):     TV-0
[   113.539] (--) NVIDIA(0):     DFP-0
[   113.539] (--) NVIDIA(0):     DFP-1
[   113.539] (--) NVIDIA(0): Ancor Communications Inc ASUS MK221 (CRT-0): 400.0 MHz maximum pixel clock
[   113.539] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[   113.539] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[   113.539] (--) NVIDIA(0): TV encoder: (null)
[   113.539] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[   113.539] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[   113.539] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[   113.539] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[   113.539] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   113.539] (**) NVIDIA(0):     device Ancor Communications Inc ASUS MK221 (CRT-0) (Using
[   113.539] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   113.539] (**) NVIDIA(0):     devices.)
[   113.539] (==) NVIDIA(0): 
[   113.539] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   113.539] (==) NVIDIA(0):     will be used as the requested mode.
[   113.539] (==) NVIDIA(0): 
[   113.539] (II) NVIDIA(0): Validated modes:
[   113.539] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[   113.539] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[   113.541] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
[   113.541] (--) NVIDIA(0):     option
[   113.541] (--) Depth 24 pixmap format is 32 bpp
[   113.549] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   113.549] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   113.549] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   113.549] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   113.549] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   113.549] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   113.549] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   113.549] (II) NVIDIA(0):     Config Options in the README.
[   113.549] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[   113.640] (II) Loading extension NV-GLX
[   113.674] (==) NVIDIA(0): Disabling shared memory pixmaps
[   113.674] (==) NVIDIA(0): Backing store disabled
[   113.674] (==) NVIDIA(0): Silken mouse enabled
[   113.674] (==) NVIDIA(0): DPMS enabled
[   113.674] (II) Loading extension NV-CONTROL
[   113.675] (II) Loading extension XINERAMA
[   113.675] (II) Loading sub module "dri2"
[   113.675] (II) LoadModule: "dri2"
[   113.675] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   113.675] (II) Module dri2: vendor="X.Org Foundation"
[   113.675] 	compiled for 1.12.2, module version = 1.2.0
[   113.675] 	ABI class: X.Org Server Extension, version 6.0
[   113.675] (II) NVIDIA(0): [DRI2] Setup complete
[   113.675] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   113.675] (--) RandR disabled
[   113.675] (II) Initializing built-in extension Generic Event Extension
[   113.675] (II) Initializing built-in extension SHAPE
[   113.675] (II) Initializing built-in extension MIT-SHM
[   113.675] (II) Initializing built-in extension XInputExtension
[   113.675] (II) Initializing built-in extension XTEST
[   113.675] (II) Initializing built-in extension BIG-REQUESTS
[   113.675] (II) Initializing built-in extension SYNC
[   113.675] (II) Initializing built-in extension XKEYBOARD
[   113.675] (II) Initializing built-in extension XC-MISC
[   113.675] (II) Initializing built-in extension SECURITY
[   113.675] (II) Initializing built-in extension XINERAMA
[   113.675] (II) Initializing built-in extension XFIXES
[   113.675] (II) Initializing built-in extension RENDER
[   113.675] (II) Initializing built-in extension RANDR
[   113.675] (II) Initializing built-in extension COMPOSITE
[   113.675] (II) Initializing built-in extension DAMAGE
[   113.677] (II) Initializing extension GLX
[   114.013] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   114.013] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   114.013] (II) LoadModule: "evdev"
[   114.013] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   114.014] (II) Module evdev: vendor="X.Org Foundation"
[   114.014] 	compiled for 1.12.0, module version = 2.7.0
[   114.014] 	Module class: X.Org XInput Driver
[   114.014] 	ABI class: X.Org XInput driver, version 16.0
[   114.014] (II) Using input driver 'evdev' for 'Power Button'
[   114.014] (**) Power Button: always reports core events
[   114.014] (**) evdev: Power Button: Device: "/dev/input/event2"
[   114.014] (--) evdev: Power Button: Vendor 0 Product 0x1
[   114.014] (--) evdev: Power Button: Found keys
[   114.014] (II) evdev: Power Button: Configuring as keyboard
[   114.014] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   114.014] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   114.014] (**) Option "xkb_rules" "evdev"
[   114.014] (**) Option "xkb_model" "evdev"
[   114.014] (**) Option "xkb_layout" "fr"
[   114.014] (**) Option "xkb_variant" "latin9"
[   114.053] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   114.053] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   114.053] (II) Using input driver 'evdev' for 'Power Button'
[   114.053] (**) Power Button: always reports core events
[   114.053] (**) evdev: Power Button: Device: "/dev/input/event1"
[   114.053] (--) evdev: Power Button: Vendor 0 Product 0x1
[   114.053] (--) evdev: Power Button: Found keys
[   114.053] (II) evdev: Power Button: Configuring as keyboard
[   114.053] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[   114.053] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   114.053] (**) Option "xkb_rules" "evdev"
[   114.053] (**) Option "xkb_model" "evdev"
[   114.053] (**) Option "xkb_layout" "fr"
[   114.053] (**) Option "xkb_variant" "latin9"
[   114.054] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
[   114.054] (II) No input driver specified, ignoring this device.
[   114.054] (II) This device may have been added with another device file.
[   114.054] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event5)
[   114.054] (II) No input driver specified, ignoring this device.
[   114.054] (II) This device may have been added with another device file.
[   114.054] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[   114.054] (II) No input driver specified, ignoring this device.
[   114.054] (II) This device may have been added with another device file.
[   114.055] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event8)
[   114.055] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[   114.055] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[   114.055] (**) ASUS USB2.0 Webcam: always reports core events
[   114.055] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event8"
[   114.055] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x458 Product 0x705a
[   114.055] (--) evdev: ASUS USB2.0 Webcam: Found keys
[   114.055] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[   114.055] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8/event8"
[   114.055] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 8)
[   114.055] (**) Option "xkb_rules" "evdev"
[   114.055] (**) Option "xkb_model" "evdev"
[   114.055] (**) Option "xkb_layout" "fr"
[   114.055] (**) Option "xkb_variant" "latin9"
[   114.055] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   114.055] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   114.055] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   114.055] (**) AT Translated Set 2 keyboard: always reports core events
[   114.055] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   114.055] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   114.055] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   114.055] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   114.055] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   114.055] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   114.055] (**) Option "xkb_rules" "evdev"
[   114.055] (**) Option "xkb_model" "evdev"
[   114.055] (**) Option "xkb_layout" "fr"
[   114.055] (**) Option "xkb_variant" "latin9"
[   114.056] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event7)
[   114.056] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[   114.056] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[   114.056] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[   114.056] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event7"
[   114.056] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[   114.056] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[   114.056] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[   114.056] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[   114.056] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[   114.056] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[   114.056] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[   114.056] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[   114.056] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   114.056] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[   114.056] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 10)
[   114.064] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[   114.065] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[   114.065] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[   114.065] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[   114.065] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[   114.065] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[   114.065] (II) No input driver specified, ignoring this device.
[   114.065] (II) This device may have been added with another device file.
[   114.065] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[   114.065] (II) No input driver specified, ignoring this device.
[   114.065] (II) This device may have been added with another device file.
[   119.925] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS MK221 (CRT-0)) does not
[   119.925] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   119.925] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   119.925] (**) NVIDIA(0):     device Ancor Communications Inc ASUS MK221 (CRT-0) (Using
[   119.926] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   119.926] (**) NVIDIA(0):     devices.)

Re: [environnement graphique] blocage aléatoire

Publié : mer. 04 juil. 2012, 19:14
par mélodie
Salut,
Je dis comme benjarobin, il semble que ta carte graphique ne se plaise pas dans cette machine.

Essaie d'ajouter l'option noapic sur la ligne de boot du kernel. Dis-nous si ça aide.

Pourrais-tu nous dire pourquoi tu as mis "irqbalance" dans le rc.conf ?

Re: [environnement graphique] blocage aléatoire

Publié : jeu. 05 juil. 2012, 17:07
par genesis66
j'ai desinstallé le driver nvidia et remplacé par nouveau.
Depuis hier soir aucun plantage, donc l'hypothese carte/driver nvidia semble la bonne.
Pour irqbalance j'ai du voir ca dans un tuto sur le web, je ne me souviens plus, tu me le déconseille ?
Fuseau horaire sur UTC+02:00
Page 1 sur 1

Développé par phpBB® Forum Software © phpBB Limited

Traduction française officielle © Qiaeru