Page 1 sur 1
[OpenGl] Pas d'effet de Bureau(résolu)
Publié : ven. 05 oct. 2012, 13:08
par kklouty
Bonjour/Bonsoir,
Etant nouveau sur ArchLinux (Depuis hier) ,j'ai installer Kde comme Interface graphique, j'ai suivis le wiki pour les débutans.
Le probleme est que je n'arrive pas à activer les effets bureau a cause de OpenGl car lors de l'activation des ces effets je reçois un message me disant "Nécéssite OpenGl".
Le problème viens elle de ma carte graphique? (Geforce gt 630)
Code : Tout sélectionner
lspci | grep VGA
02:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 630] (rev a1)
[archival@archiso
Ou d'une mauvaise installation de ma part?
Pour la carte graphique tout semble reconnu mais elle ne semble pas fonctionner correctement :/
Si vous pouviez m'orientez ça m'aiderai pas mal
.
Merci d'avance.
kklouty
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 13:09
par benjarobin
Et tu as installé quoi ? Et configuré comment ?
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 13:11
par kklouty
Eh bien pour la carte graphique j'ai installer le pilote propriétaire (pacman -S nvidia) et pour le son absolument rien.
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 13:12
par kklouty
Je n'ai pas vraiment toucher au fichier de config, ne m'y connaissant que très moyennement je n'ai pas osé .
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 13:13
par benjarobin
Merci de ne pas faire de multi-post (plusieurs messages de suite)
De plus un seul sujet, ici on ne traitera que de nvidia, merci d'ouvrir un autre pour le son
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 13:16
par kklouty
D'accord, excusez moi, j'aurais du éditer. Pouvez vous m'aider concernant mon problème Nvidia?
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 14:21
par FoolEcho
Salut, on peut voir le log de X déjà ? (/var/log/Xorg.0.log ; via pastebin si trop long)
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 14:37
par kklouty
Bonjour, impossible d'envoyer par la : pacman -S pastebin
Erreur : impossible de trouver la cible : pastebin
Tu connais une autre solution? car le fichier est effectivement trop long :/
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 14:52
par kklouty
Voila le fichier demander (j'ai fais comme j'ai pu):
Code : Tout sélectionner
[ 15.955]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 15.955] X Protocol Version 11, Revision 0
[ 15.955] Build Operating System: Linux 3.4.8-1-ARCH i686
[ 15.955] Current Operating System: Linux archiso 3.5.4-1-ARCH #1 SMP PREEMP$
[ 15.955] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f09e$
[ 15.955] Build Date: 27 August 2012 08:08:29AM
[ 15.955]
[ 15.955] Current version of pixman: 0.26.2
[ 15.955] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.955] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.956] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 5 10:49:37 20$
[ 15.998] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.005] (==) No Layout section. Using the first Screen section.
[ 16.005] (==) No screen section available. Using defaults.
[ 16.005] (**) |-->Screen "Default Screen Section" (0)
[ 16.005] (**) | |-->Monitor "<default monitor>"
[ 16.007] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.007] (==) Automatically adding devices
[ 16.007] (==) Automatically enabling devices
[ 16.043] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 16.043] Entry deleted from font path.
[ 16.043] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 16.043] Entry deleted from font path.
[ 16.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100$
[ 16.044] Entry deleted from font path.
[ 16.044] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75d$
[ 16.044] Entry deleted from font path.
16.005] (==) No screen section available. Using defaults.
[ 16.005] (**) |-->Screen "Default Screen Section" (0)
[ 16.005] (**) | |-->Monitor "<default monitor>"
[ 16.007] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.007] (==) Automatically adding devices
[ 16.007] (==) Automatically enabling devices
[ 16.043] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 16.043] Entry deleted from font path.
[ 16.043] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 16.043] Entry deleted from font path.
[ 16.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100$
[ 16.044] Entry deleted from font path.
[ 16.044] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75d$
[ 16.044] Entry deleted from font path.
[ 16.044] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.044] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 16.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.044] (II) The server relies on udev to provide the list of input device$
If no devices become available, reconfigure udev or disable AutoAddDevi$
[ 16.044] (II) Loader magic: 0x82225a0
[ 16.044] (II) Module ABI versions:
[ 16.044] X.Org ANSI C Emulation: 0.4
[ 16.044] X.Org Video Driver: 12.1
[ 16.044] X.Org XInput driver : 16.0
[ 16.044] X.Org Server Extension : 6.0
[ 16.046] (--) PCI:*(0:2:0:0) 10de:0f00:1569:0f00 rev 161, Mem @ 0xfd000000/$
[ 16.046] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or dir$
[ 16.046] (II) LoadModule: "extmod"
[ 16.048] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 16.056] (II) Module extmod: vendor="X.Org Foundation"
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 16.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.044] (II) The server relies on udev to provide the list of input device$
If no devices become available, reconfigure udev or disable AutoAddDevi$
[ 16.044] (II) Loader magic: 0x82225a0
[ 16.044] (II) Module ABI versions:
[ 16.044] X.Org ANSI C Emulation: 0.4
[ 16.044] X.Org Video Driver: 12.1
[ 16.044] X.Org XInput driver : 16.0
[ 16.044] X.Org Server Extension : 6.0
[ 16.046] (--) PCI:*(0:2:0:0) 10de:0f00:1569:0f00 rev 161, Mem @ 0xfd000000/$
[ 16.046] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or dir$
[ 16.046] (II) LoadModule: "extmod"
[ 16.048] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 16.056] (II) Module extmod: vendor="X.Org Foundation"
[ 16.056] compiled for 1.12.4, module version = 1.0.0
[ 16.056] Module class: X.Org Server Extension
[ 16.057] ABI class: X.Org Server Extension, version 6.0
[ 16.057] (II) Loading extension MIT-SCREEN-SAVER
[ 16.057] (II) Loading extension XFree86-VidModeExtension
[ 16.057] (II) Loading extension XFree86-DGA
[ 16.057] (II) Loading extension DPMS
[ 16.057] (II) Loading extension XVideo
[ 16.057] (II) Loading extension XVideo-MotionCompensation
[ 16.057] (II) Loading extension X-Resource
[ 16.057] (II) LoadModule: "dbe"
[ 16.057] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 16.057] (II) Module dbe: vendor="X.Org Foundation"
[ 16.057] compiled for 1.12.4, module version = 1.0.0
[ 16.057] Module class: X.Org Server Extension
[ 16.057] ABI class: X.Org Server Extension, version 6.0
[ 16.057] (II) Loading extension DOUBLE-BUFFER
[ 16.058] (II) LoadModule: "glx"
16.058] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.456] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.456] compiled for 4.0.2, module version = 1.0.0
[ 16.456] Module class: X.Org Server Extension
[ 16.456] (II) NVIDIA GLX Module 304.51 Tue Sep 18 17:58:56 PDT 2012
[ 16.456] (II) Loading extension GLX
[ 16.456] (II) LoadModule: "record"
[ 16.456] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.465] (II) Module record: vendor="X.Org Foundation"
[ 16.465] compiled for 1.12.4, module version = 1.13.0
[ 16.465] Module class: X.Org Server Extension
[ 16.465] ABI class: X.Org Server Extension, version 6.0
[ 16.465] (II) Loading extension RECORD
[ 16.465] (II) LoadModule: "dri"
[ 16.465] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.474] (II) Module dri: vendor="X.Org Foundation"
[ 16.474] compiled for 1.12.4, module version = 1.0.0
[ 16.474] ABI class: X.Org Server Extension, version 6.0
16.465] (II) Loading extension RECORD
[ 16.465] (II) LoadModule: "dri"
[ 16.465] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.474] (II) Module dri: vendor="X.Org Foundation"
[ 16.474] compiled for 1.12.4, module version = 1.0.0
[ 16.474] ABI class: X.Org Server Extension, version 6.0
[ 16.474] (II) Loading extension XFree86-DRI
[ 16.474] (II) LoadModule: "dri2"
[ 16.474] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.476] (II) Module dri2: vendor="X.Org Foundation"
[ 16.476] compiled for 1.12.4, module version = 1.2.0
[ 16.476] ABI class: X.Org Server Extension, version 6.0
[ 16.476] (II) Loading extension DRI2
[ 16.476] (==) Matched nouveau as autoconfigured driver 0
[ 16.476] (==) Matched nvidia as autoconfigured driver 1
[ 16.476] (==) Matched nv as autoconfigured driver 2
[ 16.476] (==) Matched vesa as autoconfigured driver 3
[ 16.476] (==) Matched fbdev as autoconfigured driver 4
[ 16.476] (==) Assigned the driver to the xf86ConfigLayout
[ 16.476] (II) LoadModule: "nouveau"
[ 16.496] (WW) Warning, couldn't open module nouveau
[ 16.496] (II) UnloadModule: "nouveau"
[ 16.496] (II) Unloading nouveau
[ 16.496] (EE) Failed to load module "nouveau" (module does not exist, 0)
16.496] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.539] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.539] compiled for 4.0.2, module version = 1.0.0
[ 16.539] Module class: X.Org Video Driver
[ 16.552] (II) LoadModule: "nv"
[ 16.553] (WW) Warning, couldn't open module nv
[ 16.553] (II) UnloadModule: "nv"
[ 16.553] (II) Unloading nv
[ 16.553] (EE) Failed to load module "nv" (module does not exist, 0)
[ 16.553] (II) LoadModule: "vesa"
[ 16.553] (WW) Warning, couldn't open module vesa
[ 16.554] (II) UnloadModule: "vesa"
[ 16.554] (II) Unloading vesa
[ 16.554] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 16.554] (II) LoadModule: "fbdev"
[ 16.554] (WW) Warning, couldn't open module fbdev
[ 16.554] (II) UnloadModule: "fbdev"
16.554] (WW) Warning, couldn't open module fbdev
[ 16.554] (II) UnloadModule: "fbdev"
[ 16.554] (II) Unloading fbdev
[ 16.554] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 16.564] (II) NVIDIA dlloader X Driver 304.51 Tue Sep 18 17:38:03 PDT 2012
[ 16.564] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.565] (++) using VT number 7
[ 16.583] (II) Loading sub module "fb"
[ 16.583] (II) LoadModule: "fb"
[ 16.584] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.585] (II) Module fb: vendor="X.Org Foundation"
[ 16.585] compiled for 1.12.4, module version = 1.0.0
[ 16.585] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.585] (II) Loading sub module "wfb"
[ 16.585] (II) LoadModule: "wfb"
[ 16.586] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.588] (II) Module wfb: vendor="X.Org Foundation"
[ 16.588] compiled for 1.12.4, module version = 1.0.0
[ 16.588] ABI class: X.Org ANSI C Emulation, version 0.4
16.588] (II) Loading sub module "ramdac"
[ 16.588] (II) LoadModule: "ramdac"
[ 16.588] (II) Module "ramdac" already built-in
[ 16.602] (II) NVIDIA(0): Creating default Display subsection in Screen sect$
"Default Screen Section" for depth/fbbpp 24/32
[ 16.602] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 16.602] (==) NVIDIA(0): RGB weight 888
[ 16.602] (==) NVIDIA(0): Default visual is TrueColor
[ 16.602] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.602] (**) NVIDIA(0): Enabling 2D acceleration
[ 17.448] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-1)) does no$
[ 17.448] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.450] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:2:0:0 (GP$
[ 17.450] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 17.450] (--) NVIDIA(0): VideoBIOS: 70.08.ae.00.00
[ 17.450] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.450] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.452] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630 at PCI:2$
17.452] (--) NVIDIA(0): CRT-0
[ 17.452] (--) NVIDIA(0): LG Electronics W2243 (CRT-1) (connected)
[ 17.452] (--) NVIDIA(0): DFP-0
[ 17.452] (--) NVIDIA(0): DFP-1
[ 17.452] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 17.452] (--) NVIDIA(0): LG Electronics W2243 (CRT-1): 400.0 MHz maximum pi$
[ 17.452] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 17.452] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 17.452] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 17.452] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 17.452] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID f$
[ 17.452] (**) NVIDIA(0): device LG Electronics W2243 (CRT-1) (Using EDID
[ 17.452] (**) NVIDIA(0): frequencies has been enabled on all display de$
[ 17.454] (==) NVIDIA(0):
[ 17.454] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-$
[ 17.454] (==) NVIDIA(0): will be used as the requested mode.
[ 17.454] (==) NVIDIA(0):
[ 17.454] (II) NVIDIA(0): Validated MetaModes:
17.454] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 17.454] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 17.484] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" $
[ 17.484] (--) NVIDIA(0): option
[ 17.484] (--) Depth 24 pixmap format is 32 bpp
[ 17.484] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 17.484] (II) NVIDIA: access.
[ 17.486] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 17.487] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.487] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 17.487] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 17.487] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
[ 17.487] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.487] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 17.487] (II) NVIDIA(0): Config Options in the README.
[ 17.488] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 17.552] (II) Loading extension NV-GLX
[ 17.602] (==) NVIDIA(0): Disabling shared memory pixmaps
17.602] (==) NVIDIA(0): Backing store disabled
[ 17.602] (==) NVIDIA(0): Silken mouse enabled
[ 17.602] (==) NVIDIA(0): DPMS enabled
[ 17.602] (II) Loading extension NV-CONTROL
[ 17.602] (II) Loading extension XINERAMA
[ 17.602] (II) Loading sub module "dri2"
[ 17.602] (II) LoadModule: "dri2"
[ 17.603] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.603] (II) Module dri2: vendor="X.Org Foundation"
[ 17.603] compiled for 1.12.4, module version = 1.2.0
[ 17.603] ABI class: X.Org Server Extension, version 6.0
[ 17.603] (II) NVIDIA(0): [DRI2] Setup complete
[ 17.603] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 17.603] (--) RandR disabled
[ 17.603] (II) Initializing built-in extension Generic Event Extension
[ 17.603] (II) Initializing built-in extension SHAPE
[ 17.603] (II) Initializing built-in extension MIT-SHM
[ 17.603] (II) Initializing built-in extension XInputExtension
17.603] (II) Initializing built-in extension XTEST
[ 17.603] (II) Initializing built-in extension BIG-REQUESTS
[ 17.603] (II) Initializing built-in extension SYNC
[ 17.603] (II) Initializing built-in extension XKEYBOARD
[ 17.603] (II) Initializing built-in extension XC-MISC
[ 17.603] (II) Initializing built-in extension SECURITY
[ 17.603] (II) Initializing built-in extension XINERAMA
[ 17.603] (II) Initializing built-in extension XFIXES
[ 17.603] (II) Initializing built-in extension RENDER
[ 17.603] (II) Initializing built-in extension RANDR
[ 17.603] (II) Initializing built-in extension COMPOSITE
[ 17.603] (II) Initializing built-in extension DAMAGE
[ 17.604] (II) Initializing extension GLX
[ 17.836] (II) config/udev: Adding input device Power Button (/dev/input/eve$
[ 17.836] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17.836] (II) LoadModule: "evdev"
[ 17.836] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17.867] (II) Module evdev: vendor="X.Org Foundation"
17.867] compiled for 1.12.3.901, module version = 2.7.3
[ 17.867] Module class: X.Org XInput Driver
[ 17.867] ABI class: X.Org XInput driver, version 16.0
[ 17.867] (II) Using input driver 'evdev' for 'Power Button'
[ 17.868] (**) Power Button: always reports core events
[ 17.868] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 17.868] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17.868] (--) evdev: Power Button: Found keys
[ 17.868] (II) evdev: Power Button: Configuring as keyboard
[ 17.868] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:$
[ 17.868] (II) XINPUT: Adding extended input device "Power Button" (type: KE$
[ 17.868] (**) Option "xkb_rules" "evdev"
[ 17.868] (**) Option "xkb_model" "evdev"
[ 17.868] (**) Option "xkb_layout" "us"
[ 17.909] (II) config/udev: Adding input device Power Button (/dev/input/eve$
[ 17.909] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17.909] (II) Using input driver 'evdev' for 'Power Button'
[ 17.909] (**) Power Button: always reports core events
17.909] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 17.909] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17.909] (--) evdev: Power Button: Found keys
[ 17.909] (II) evdev: Power Button: Configuring as keyboard
[ 17.909] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00$
[ 17.909] (II) XINPUT: Adding extended input device "Power Button" (type: KE$
[ 17.909] (**) Option "xkb_rules" "evdev"
[ 17.909] (**) Option "xkb_model" "evdev"
[ 17.909] (**) Option "xkb_layout" "us"
[ 17.911] (II) config/udev: Adding input device USB Keyboard (/dev/input/e$
[ 17.911] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 17.911] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 17.911] (**) USB Keyboard: always reports core events
[ 17.911] (**) evdev: USB Keyboard: Device: "/dev/input/event0"
[ 17.911] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1702
[ 17.911] (--) evdev: USB Keyboard: Found keys
[ 17.911] (II) evdev: USB Keyboard: Configuring as keyboard
[ 17.911] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02$
17.911] (II) XINPUT: Adding extended input device " USB Keyboard" (type: $
[ 17.911] (**) Option "xkb_rules" "evdev"
[ 17.911] (**) Option "xkb_model" "evdev"
[ 17.911] (**) Option "xkb_layout" "us"
[ 17.912] (II) config/udev: Adding input device USB Keyboard (/dev/input/e$
[ 17.912] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 17.912] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 17.912] (**) USB Keyboard: always reports core events
[ 17.912] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
[ 17.913] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1702
[ 17.913] (--) evdev: USB Keyboard: Found keys
[ 17.913] (II) evdev: USB Keyboard: Configuring as keyboard
[ 17.913] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02$
[ 17.913] (II) XINPUT: Adding extended input device " USB Keyboard" (type: $
[ 17.913] (**) Option "xkb_rules" "evdev"
[ 17.913] (**) Option "xkb_model" "evdev"
[ 17.913] (**) Option "xkb_layout" "us"
[ 17.914] (II) config/udev: Adding input device Logitech USB Receiver (/dev/$
17.912] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 17.912] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 17.912] (**) USB Keyboard: always reports core events
[ 17.912] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
[ 17.913] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1702
[ 17.913] (--) evdev: USB Keyboard: Found keys
[ 17.913] (II) evdev: USB Keyboard: Configuring as keyboard
[ 17.913] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02$
[ 17.913] (II) XINPUT: Adding extended input device " USB Keyboard" (type: $
[ 17.913] (**) Option "xkb_rules" "evdev"
[ 17.913] (**) Option "xkb_model" "evdev"
[ 17.913] (**) Option "xkb_layout" "us"
[ 17.914] (II) config/udev: Adding input device Logitech USB Receiver (/dev/$
[ 17.914] (**) Logitech USB Receiver: Applying InputClass "evdev pointer cat$
[ 17.914] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 17.914] (**) Logitech USB Receiver: always reports core events
[ 17.914] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 17.914] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 17.914] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 17.914] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 17.914] (--) evdev: Logitech USB Receiver: Found relative axes
[ 17.914] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 17.914] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 17.914] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 17.914] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 17.914] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateW$
[ 17.915] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02$
[ 17.915] (II) XINPUT: Adding extended input device "Logitech USB Receiver" $
[ 17.915] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 17.915] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 17.915] (**) Logitech USB Receiver: (accel) acceleration profile 0
17.915] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 17.915] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 17.916] (II) config/udev: Adding input device Logitech USB Receiver (/dev/$
[ 17.916] (II) No input driver specified, ignoring this device.
[ 17.916] (II) This device may have been added with another device file.
[ 17.916] (II) config/udev: Adding input device Logitech USB Receiver (/dev/$
[ 17.916] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard ca$
[ 17.916] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 17.916] (**) Logitech USB Receiver: always reports core events
[ 17.916] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 17.916] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 17.916] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 17.916] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 17.916] (--) evdev: Logitech USB Receiver: Found relative axes
[ 17.916] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to ex$
[ 17.916] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 17.916] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to ex$
[ 17.916] (--) evdev: Logitech USB Receiver: Found keys
17.916] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 17.916] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 17.916] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 17.916] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 17.916] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateW$
[ 17.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02$
[ 17.916] (II) XINPUT: Adding extended input device "Logitech USB Receiver" $
[ 17.916] (**) Option "xkb_rules" "evdev"
[ 17.917] (**) Option "xkb_model" "evdev"
[ 17.917] (**) Option "xkb_layout" "us"
[ 17.917] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 17.917] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 17.917] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 17.917] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 17.917] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 17.917] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 17.917] (II) config/udev: Adding input device HDA NVidia Front Headphone ($
[ 17.917] (II) No input driver specified, ignoring this device.
17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/in$
[ 17.917] (II) No input driver specified, ignoring this device.
[ 17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/$
[ 17.917] (II) No input driver specified, ignoring this device.
[ 17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/i$
[ 17.917] (II) No input driver specified, ignoring this device.
[ 17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/in$
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/d$
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/d$
[ 17.918] (II) No input driver specified, ignoring this device.
17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/d$
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/d$
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/d$
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device PC Speaker (/dev/input/event$
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 42.566] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-1)) does no$
[ 42.566] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 42.566] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID f$
[ 42.566] (**) NVIDIA(0): device LG Electronics W2243 (CRT-1) (Using EDID
[ 42.566] (**) NVIDIA(0): frequencies has been enabled on all display de$
[ 60.763] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-1)) does no$
[ 60.763] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 60.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID f$
60.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID f$
[ 60.763] (**) NVIDIA(0): device LG Electronics W2243 (CRT-1) (Using EDID
[ 60.763] (**) NVIDIA(0): frequencies has been enabled on all display de$
[ 60.857] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-1)) does no$
[ 60.857] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 60.857] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID f$
[ 60.857] (**) NVIDIA(0): device LG Electronics W2243 (CRT-1) (Using EDID
[ 60.857] (**) NVIDIA(0): frequencies has been enabled on all display de$
[ 62.404] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-1)) does no$
[ 62.405] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 62.405] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID f$
[ 62.405] (**) NVIDIA(0): device LG Electronics W2243 (CRT-1) (Using EDID
[ 62.405] (**) NVIDIA(0): frequencies has been enabled on all display de$
[ 820.280] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 820.393] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 820.393] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 820.393] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 820.393] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 820.393] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
820.393] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 820.393] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 820.394] (II) NVIDIA(0): Config Options in the README.
[ 970.808] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 970.924] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 970.924] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 970.924] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 970.924] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 970.924] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
[ 970.924] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 970.924] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 970.924] (II) NVIDIA(0): Config Options in the README.
[ 1268.377] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 1268.487] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 1268.487] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1268.487] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 1268.487] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 1268.487] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
1268.487] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1268.487] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 1268.487] (II) NVIDIA(0): Config Options in the README.
[ 2046.417] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 2046.534] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 2046.534] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2046.534] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 2046.534] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 2046.534] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
[ 2046.534] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2046.534] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 2046.534] (II) NVIDIA(0): Config Options in the README.
[ 2084.250] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 2084.357] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 2084.357] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2084.357] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 2084.357] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 2084.357] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
2084.357] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2084.357] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 2084.357] (II) NVIDIA(0): Config Options in the README.
[ 2402.840] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 2402.943] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 2402.943] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2402.943] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 2402.943] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 2402.943] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
[ 2402.943] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2402.943] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 2402.943] (II) NVIDIA(0): Config Options in the README.
[ 5535.758] (II) config/udev: Adding input device Logitech Logitech USB Headse$
[ 5535.758] (**) Logitech Logitech USB Headset: Applying InputClass "evdev key$
[ 5535.758] (II) Using input driver 'evdev' for 'Logitech Logitech USB Headset'
[ 5535.758] (**) Logitech Logitech USB Headset: always reports core events
[ 5535.758] (**) evdev: Logitech Logitech USB Headset: Device: "/dev/input/eve$
[ 5535.758] (--) evdev: Logitech Logitech USB Headset: Vendor 0x46d Product 0x$
5535.758] (--) evdev: Logitech Logitech USB Headset: Found keys
[ 5535.758] (II) evdev: Logitech Logitech USB Headset: Configuring as keyboard
[ 5535.758] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02$
[ 5535.758] (II) XINPUT: Adding extended input device "Logitech Logitech USB H$
[ 5535.758] (**) Option "xkb_rules" "evdev"
[ 5535.758] (**) Option "xkb_model" "evdev"
[ 5535.758] (**) Option "xkb_layout" "us"
[ 5866.460] (II) config/udev: removing device Logitech Logitech USB Headset
[ 5866.469] (II) evdev: Logitech Logitech USB Headset: Close
[ 5866.469] (II) UnloadModule: "evdev"
[ 5890.260] (II) config/udev: Adding input device Logitech Logitech USB Headse$
[ 5890.260] (**) Logitech Logitech USB Headset: Applying InputClass "evdev key$
[ 5890.260] (II) Using input driver 'evdev' for 'Logitech Logitech USB Headset'
[ 5890.260] (**) Logitech Logitech USB Headset: always reports core events
[ 5890.260] (**) evdev: Logitech Logitech USB Headset: Device: "/dev/input/eve$
[ 5890.260] (--) evdev: Logitech Logitech USB Headset: Vendor 0x46d Product 0x$
[ 5890.260] (--) evdev: Logitech Logitech USB Headset: Found keys
[ 5890.260] (II) evdev: Logitech Logitech USB Headset: Configuring as keyboard
5890.260] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02$
[ 5890.260] (II) XINPUT: Adding extended input device "Logitech Logitech USB H$
[ 5890.260] (**) Option "xkb_rules" "evdev"
[ 5890.260] (**) Option "xkb_model" "evdev"
[ 5890.260] (**) Option "xkb_layout" "us"
[ 5988.646] (II) config/udev: removing device Logitech Logitech USB Headset
[ 5988.652] (II) evdev: Logitech Logitech USB Headset: Close
[ 5988.652] (II) UnloadModule: "evdev"
[ 6396.738] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 6396.854] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; $
[ 6396.854] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 6396.854] (II) NVIDIA(0): configuration option may not be set correctly.$
[ 6396.854] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X d$
[ 6396.854] (II) NVIDIA(0): try to use it to receive ACPI event notificati$
[ 6396.854] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 6396.854] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in A$
[ 6396.854] (II) NVIDIA(0): Config Options in the README.
Euh ça aide?
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 19:04
par FoolEcho
Pour pastebin, il fallait rajouter le dépôt archlinuxfr, c'est indiqué.
Pour opengl, je n'ai pas d'idée... Tu lances par kdm ? On peut voir ton ~/.xsession-errors ?
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 19:45
par kklouty
Je pense pas que ma carte graphique ou son pilote est en cause :/ dans quel dossier ce trouve ce fichier ? :S (désolé je débute avec arch :/ )
Re: [OpenGl] Pas d'effet de Bureau
Publié : ven. 05 oct. 2012, 19:56
par FoolEcho
~ désigne /home/ton_user.
Re: [OpenGl] Pas d'effet de Bureau
Publié : sam. 06 oct. 2012, 15:48
par kklouty
Re: [OpenGl] Pas d'effet de Bureau
Publié : sam. 06 oct. 2012, 17:17
par hopimet
Salut,
Si tu vas dans [Applications] puis [Configuration du Système] puis [Effets de Bureau] puis onglet [Options avancées] le mode d'affichage composite est bien réglé su OpenGL et non sur XRender ?
Certains effets nécessitant OpenGL ne fonctionneront pas en effet si tu es réglé sur XRender.
Re: [OpenGl] Pas d'effet de Bureau
Publié : sam. 06 oct. 2012, 18:31
par FoolEcho
Ce qui m'étonne est que le log ne montre rien concernant ta carte (par comparaison, chez moi, il y a des infos sur la carte/opengl)...
À cause de la première ligne ? (ce fichier existe chez moi)
Tu lances ta session par KDM ?
Re: [OpenGl] Pas d'effet de Bureau
Publié : sam. 06 oct. 2012, 23:48
par kklouty
Je lance par kdm, oui ! En effet Hopimet le xrender était actif au lieu de l'Open Gl !
Probleme résolut donc ! Merci a tous! Une dernière question, malgré tout, ma carte graphique peine un peu, il y'a moyen de la tester ? :/
Re: [OpenGl] Pas d'effet de Bureau(résolu)
Publié : dim. 07 oct. 2012, 20:47
par hopimet
@kklouty,
Tu veux dire quoi par peine un peu ? Perso j'ai une vieille Nvidia 7300 GeForce que j'utilise avec le pilote libre nouveau. Je suis resté en XRender, quitte à "sacrifier" quelques effets de bureau, parce qu'en openGL j'ai parfois des freezes avec KDE, alors qu'avec XRender c'est super fluide.
Re: [OpenGl] Pas d'effet de Bureau(résolu)
Publié : dim. 07 oct. 2012, 21:23
par kklouty
C'est pas vraiment depuis que j'ai activer les effets, c'est en générale... Exemple sur kde lors que j'appuie sur le lanceur d'application et que je choisi poste de travaille, ma souris vas plus vite que l'effet de choix. Ou même au démarrage quelques fois l'écran devient noir quelques dixieme de secondes et se rallume.
Re: [OpenGl] Pas d'effet de Bureau(résolu)
Publié : dim. 07 oct. 2012, 22:04
par hopimet
Difficile de savoir si c'est la carte graphique ou le pilote Nvidia. Faudrait peut être regarder dans les logs juste après ce type de problème pour voir si il y a des informations. Après, pour le coup de la souris, c'est peut être elle aussi qui pose problème. Essaye avec une autre, on ne sait jamais.
Re: [OpenGl] Pas d'effet de Bureau(résolu)
Publié : lun. 08 oct. 2012, 17:07
par kklouty
Ce que je veux dire c'est que j'ai l'impression que mon interface graphique peine a me suivre :p