Archlinux.fr [Forums]

Bonjour à tous,
Ce matin, mise à jour vers gnome 3.8. Cool...

sudo pacman-Rdd libsoup-gnome
Sudo pacman-Rdd gnome-games gnome-games-extra-data
Sudo pacman-Syu

Et après, au reboot, ça reste bloqué à :
Systemd-fsck[219]: /dev/sda1: 317/38456 fichiers...

Que dois-je faire !

Merci de vos réponses

Virer gnome et mettre autre chose à la place

Mieux vaut désinstaller proprement des paquets qu'utiliser -Rdd (tu casses les dépendances et vu que tu as fait ça pour des paquets qui n'existe plus visiblement...). Pas sûr du tout que ça ait un rapport avec ton problème de démarrage, cependant (faut voir les journaux de systemd).

J'ai eu le problème ce matin lors d'un yaourt -Suy

Code : Tout sélectionner

[vincent@Vincent-U400 ~]$ yaourt -Suya
:: Synchronisation des bases de données de paquets...
 core est à jour;
 extra est à jour;
 community est à jour;
 multilib est à jour;
 archlinuxfr est à jour;
 mate est à jour;
error: failed to prepare transaction (could not satisfy dependencies)
:: Starting full system upgrade...
:: libsoup-gnome: requires libsoup=2.40.3

ça a été résolu par un yaourt -S libsoup

Code : Tout sélectionner

résolution des dépendances...
recherche des conflits entre paquets...
:: libsoup et libsoup-gnome sont en conflit. Supprimer libsoup-gnome ? [o/N] o

Paquets (2): libsoup-gnome-2.40.3-1 [removal]  libsoup-2.42.1-1

Taille totale de téléchargement : 0,43 MiB
Taille totale installé :           3,65 MiB
Taille de mise à jour net :        -0,17 MiB

:: Procéder à l'installation ? [O/n]

ensuite la maj est passée comme un lettre à la poste

Je peux lancer gnome via slim, c'est déjà ça...
à voir pour la suite.

Bonsoir,
Chez moi ça coince aussi, gdm se lance puis deux lignes plus loin, arrêt, clavier inopérant (aucune touche)
"hard reboot".
En chroot, les logs ne montrent pas d'érreur sur gnome ni sur gdm.
Une piste ?
Merci !

Edit : les deux dernières lignes, j'imagine que c'est ça qui bloque ...

Starting Accounts Service
Starting Authorization Manager

J'ai le même souci sauf que gdm ne se lance même pas : http://forums.archlinux.fr/topic13385.html

Pareil que Gelato !
J'ai tout essayé, réinstallation de libsoup, réinstallation de gnome et gnome-extra. RIEN
Et même si je vire gdm du démarrage, impossible de démarrer gnome via startx, ni même avec SLIM.

Hum… je crois que je vais attendre un peu :-/

Bon, finalement j'ai pu démarrer Gnome via SLIM comme Springbank.
Voilà le .xinitrc qui fonctionne:
exec gnome-session

Par contre, c'est vraiment moche, donc perso j'attends une solution pour GDM!

Pas de probleme a mon PC de bureau ce matin, mais, ce soir, au maleur...

1/ booté sur un CD
2/ chrooté
3/ systemctl disable gdm.service
4/ rebooté

se loguer en console puis

Code : Tout sélectionner

$ sudo pacman -S slim
$ echo "exec gnome-session;" > ~/.xinitrc
$ sudo vim /etc/slim.conf +55

remplacer

Code : Tout sélectionner

sessions            xfce4,icewm-session,wmaker,blackbox

par

Code : Tout sélectionner

#sessions            xfce4,icewm-session,wmaker,blackbox
sessions            gnome

Code : Tout sélectionner

$ sudo systemctl start slim.service

se loguer et gnome reviens...

puis ne pas oublié de

Code : Tout sélectionner

$ sudo systemctl enable slim.service

Ensuite pour custom le theme, installé les themes arch

Code : Tout sélectionner

$ sudo pacman -S archlinux-themes-slim
$ sudo vim /etc/slim.conf +85

remplacer

Code : Tout sélectionner

current_theme       default

par

Code : Tout sélectionner

#current_theme       default
current_theme       archlinux-darch-grey

et hop, ca sera moins moche au prochain login

bon courage en attendant mieux...

Je ne voudrais pas paraître méchant, mais au passage de Gnome 3.8, j'ai eu plus d'un problème aussi. Personnellement, je pense qu'on est beaucoup à avoir des soucis avec Gnome 3.8...

Personnellement je pense qu'il n'y en a pas plus que pour n'importe quelle mise à jour plus ou moins conséquente.
Déjà, le topic commence par une erreur fsck

, alors, on peut dire que gnome fait plein de choses, mais jusqu'au fsck, il a pas vraiment son mot à dire.
Ensuite on passe du fsck à un démarrage sur slim

il s'est passé quoi entre les 2 ?

En bref, il faudrait un peu plus de logs, surtout pour ceux qui n'arrivent pas à démarrer avec startx ou slim (les logs devraient être plus parlant), essayer avec un utilisateur neuf, démarrer gdm manuellement, ça aiderait bien mieux je pense.

Pour gdm, il y a un ticket ouvert : https://bugs.archlinux.org/task/34893 certains d'entre vous sont peut être concernés.

(et au passage, réinstaller des paquets s'il n'y a pas eu d'erreurs la première fois, ça n'apporte pas grand chose)

J'ai 30 fichiers de log dans /var/log
J'fais de mon mieux pour vous faciliter la tâche, mais si on nous dit pas quel fichier de log il vous faut, on peut pas forcément le deviner ^^'

man journalctl

Désolé, je n'avais deviné que tu ne savais pas qu'on ne savait pas que tu ne savais pas ...

Depuis systemd, il n'y a plus de fichiers de logs :
http://wiki.archlinux.fr/Systemd#Journalisation
Donc pour avoir par exemple les logs de gdm (valable aussi pour slim) s'il est lancé en service :

Code : Tout sélectionner

journalctl -u gdm

Pour X, c'est comme d'habitude : /var/log/Xorg*
Pour startx, c'est la sortie de la commande.

Ceci dit, tu arrives à démarrer gnome avec slim, donc en théorie, aussi avec startx vu que c'est la même commande qui est lancée.

(pour gdm, il y a un autre ticket : https://bugs.archlinux.org/task/34756)

T'cho, tu m'en apprends une.
Encore du mal à me faire à systemd moi.

Donc oui, effectivement personnellement c'est GDM qui foire. Pour le moment je suis au bureau, j'éditerai mon message lorsque je serai chez moi en postant le journal de GDM et XORG. Je garde le ticket de côté, en espérant une solution.

Merci =')

EDIT:
Voilà le journal de gdm:

Code : Tout sélectionner

avr 23 18:39:07 AcerArchLinux systemd[1]: Starting GNOME Display Manager...
avr 23 18:39:07 AcerArchLinux systemd[1]: Started GNOME Display Manager.
avr 23 18:39:07 AcerArchLinux gdm[1155]: Child process 1162 was already dead.
avr 23 18:39:07 AcerArchLinux gdm[1155]: GLib-GObject: g_object_ref: assertion `object->ref_count > 0' failed
avr 23 18:39:07 AcerArchLinux gdm[1155]: GLib-GObject: g_object_unref: assertion `object->ref_count > 0' failed
avr 23 18:39:07 AcerArchLinux gdm[1155]: GdmDisplay: display lasted 0,068193 seconds
avr 23 18:39:07 AcerArchLinux gdm[1155]: GdmDisplay: display lasted 0,072053 seconds
avr 23 18:39:08 AcerArchLinux gdm[1155]: Failed to give slave programs access to the display. Trying to proceed.
avr 23 18:39:15 AcerArchLinux gdm-password][1232]: pam_unix(gdm-password:session): session opened for user gamma by (unknown)(uid=0)
avr 23 18:40:46 AcerArchLinux gdm[1155]: GLib-GObject: g_object_ref: assertion `object->ref_count > 0' failed
avr 23 18:40:46 AcerArchLinux gdm[1155]: GLib-GObject: g_object_unref: assertion `object->ref_count > 0' failed

Et celui de Xorg:

Code : Tout sélectionner

[    15.635] 
X.Org X Server 1.14.1
Release Date: 2013-04-17
[    15.635] X Protocol Version 11, Revision 0
[    15.635] Build Operating System: Linux 3.8.7-1-ARCH x86_64 
[    15.635] Current Operating System: Linux AcerArchLinux 3.8.8-1-ARCH #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013 x86_64
[    15.635] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[    15.635] Build Date: 17 April 2013  02:37:06PM
[    15.635]  
[    15.635] Current version of pixman: 0.28.2
[    15.635] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.635] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.635] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 23 18:27:52 2013
[    15.692] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.808] (==) No Layout section.  Using the first Screen section.
[    15.808] (==) No screen section available. Using defaults.
[    15.808] (**) |-->Screen "Default Screen Section" (0)
[    15.808] (**) |   |-->Monitor "<default monitor>"
[    15.808] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    15.808] (==) Automatically adding devices
[    15.808] (==) Automatically enabling devices
[    15.808] (==) Automatically adding GPU devices
[    15.888] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    15.888] 	Entry deleted from font path.
[    15.923] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.923] 	Entry deleted from font path.
[    15.923] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.923] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.923] 	Entry deleted from font path.
[    15.923] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.923] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    15.923] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.923] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.930] (II) Loader magic: 0x7fcc20
[    15.930] (II) Module ABI versions:
[    15.930] 	X.Org ANSI C Emulation: 0.4
[    15.930] 	X.Org Video Driver: 14.1
[    15.930] 	X.Org XInput driver : 19.1
[    15.930] 	X.Org Server Extension : 7.0
[    15.931] (II) config/udev: Adding drm device (/dev/dri/card0)
[    15.933] (--) PCI:*(0:0:2:0) 8086:0116:1025:0504 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00002000/64
[    15.934] Initializing built-in extension Generic Event Extension
[    15.934] Initializing built-in extension SHAPE
[    15.934] Initializing built-in extension MIT-SHM
[    15.934] Initializing built-in extension XInputExtension
[    15.934] Initializing built-in extension XTEST
[    15.934] Initializing built-in extension BIG-REQUESTS
[    15.934] Initializing built-in extension SYNC
[    15.934] Initializing built-in extension XKEYBOARD
[    15.934] Initializing built-in extension XC-MISC
[    15.934] Initializing built-in extension SECURITY
[    15.934] Initializing built-in extension XINERAMA
[    15.934] Initializing built-in extension XFIXES
[    15.934] Initializing built-in extension RENDER
[    15.934] Initializing built-in extension RANDR
[    15.934] Initializing built-in extension COMPOSITE
[    15.934] Initializing built-in extension DAMAGE
[    15.934] Initializing built-in extension MIT-SCREEN-SAVER
[    15.934] Initializing built-in extension DOUBLE-BUFFER
[    15.934] Initializing built-in extension RECORD
[    15.934] Initializing built-in extension DPMS
[    15.934] Initializing built-in extension X-Resource
[    15.934] Initializing built-in extension XVideo
[    15.934] Initializing built-in extension XVideo-MotionCompensation
[    15.934] Initializing built-in extension XFree86-VidModeExtension
[    15.934] Initializing built-in extension XFree86-DGA
[    15.934] Initializing built-in extension XFree86-DRI
[    15.934] Initializing built-in extension DRI2
[    15.934] (II) LoadModule: "glx"
[    15.961] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.979] (II) Module glx: vendor="X.Org Foundation"
[    15.980] 	compiled for 1.14.1, module version = 1.0.0
[    15.980] 	ABI class: X.Org Server Extension, version 7.0
[    15.980] (==) AIGLX enabled
[    15.980] Loading extension GLX
[    15.980] (==) Matched intel as autoconfigured driver 0
[    15.980] (==) Matched intel as autoconfigured driver 1
[    15.980] (==) Matched vesa as autoconfigured driver 2
[    15.980] (==) Matched modesetting as autoconfigured driver 3
[    15.980] (==) Matched fbdev as autoconfigured driver 4
[    15.980] (==) Assigned the driver to the xf86ConfigLayout
[    15.980] (II) LoadModule: "intel"
[    16.116] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.445] (II) Module intel: vendor="X.Org Foundation"
[    16.445] 	compiled for 1.14.0, module version = 2.21.6
[    16.445] 	Module class: X.Org Video Driver
[    16.445] 	ABI class: X.Org Video Driver, version 14.1
[    16.445] (II) LoadModule: "vesa"
[    16.530] (WW) Warning, couldn't open module vesa
[    16.530] (II) UnloadModule: "vesa"
[    16.530] (II) Unloading vesa
[    16.530] (EE) Failed to load module "vesa" (module does not exist, 0)
[    16.530] (II) LoadModule: "modesetting"
[    16.531] (WW) Warning, couldn't open module modesetting
[    16.531] (II) UnloadModule: "modesetting"
[    16.531] (II) Unloading modesetting
[    16.531] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    16.531] (II) LoadModule: "fbdev"
[    16.531] (WW) Warning, couldn't open module fbdev
[    16.531] (II) UnloadModule: "fbdev"
[    16.531] (II) Unloading fbdev
[    16.531] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    16.531] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    16.531] (++) using VT number 1

[    16.532] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    16.532] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.532] (==) intel(0): RGB weight 888
[    16.532] (==) intel(0): Default visual is TrueColor
[    16.532] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    16.532] (**) intel(0): Relaxed fencing enabled
[    16.532] (**) intel(0): Wait on SwapBuffers? enabled
[    16.532] (**) intel(0): Triple buffering? enabled
[    16.532] (**) intel(0): Framebuffer tiled
[    16.532] (**) intel(0): Pixmaps tiled
[    16.532] (**) intel(0): 3D buffers tiled
[    16.544] (**) intel(0): SwapBuffers wait enabled
[    16.544] (==) intel(0): video overlay key set to 0x101fe
[    16.544] (II) intel(0): Output LVDS1 has no monitor section
[    16.544] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    16.557] (II) intel(0): Output VGA1 has no monitor section
[    16.570] (II) intel(0): Output HDMI1 has no monitor section
[    16.610] (II) intel(0): Output DP1 has no monitor section
[    16.610] (II) intel(0): EDID for output LVDS1
[    16.610] (II) intel(0): Manufacturer: LGD  Model: 250  Serial#: 0
[    16.610] (II) intel(0): Year: 2010  Week: 0
[    16.610] (II) intel(0): EDID Version: 1.3
[    16.610] (II) intel(0): Digital Display Input
[    16.610] (II) intel(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[    16.610] (II) intel(0): Gamma: 2.20
[    16.610] (II) intel(0): No DPMS capabilities specified
[    16.610] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.610] (II) intel(0): First detailed timing is preferred mode
[    16.610] (II) intel(0): redX: 0.612 redY: 0.375   greenX: 0.332 greenY: 0.619
[    16.610] (II) intel(0): blueX: 0.151 blueY: 0.099   whiteX: 0.313 whiteY: 0.329
[    16.610] (II) intel(0): Manufacturer's mask: 0
[    16.610] (II) intel(0): Supported detailed timing:
[    16.610] (II) intel(0): clock: 72.3 MHz   Image Size:  345 x 194 mm
[    16.610] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    16.610] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    16.610] (II) intel(0):  LG Display
[    16.610] (II) intel(0):  LP156WH2-TLEA
[    16.610] (II) intel(0): EDID (in hex):
[    16.610] (II) intel(0): 	00ffffffffffff0030e4500200000000
[    16.610] (II) intel(0): 	00140103802313780ac2d59c60559e26
[    16.610] (II) intel(0): 	19505400000001010101010101010101
[    16.610] (II) intel(0): 	0101010101013e1c56a0500016303020
[    16.610] (II) intel(0): 	350059c2100000190000000000000000
[    16.610] (II) intel(0): 	00000000000000000000000000fe004c
[    16.611] (II) intel(0): 	4720446973706c61790a2020000000fe
[    16.611] (II) intel(0): 	004c503135365748322d544c454100fd
[    16.611] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    16.611] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    16.611] (II) intel(0): Printing probed modes for output LVDS1
[    16.611] (II) intel(0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    16.611] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    16.611] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    16.611] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    16.611] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    16.623] (II) intel(0): EDID for output VGA1
[    16.636] (II) intel(0): EDID for output HDMI1
[    16.676] (II) intel(0): EDID for output DP1
[    16.676] (II) intel(0): Output LVDS1 connected
[    16.676] (II) intel(0): Output VGA1 disconnected
[    16.676] (II) intel(0): Output HDMI1 disconnected
[    16.676] (II) intel(0): Output DP1 disconnected
[    16.676] (II) intel(0): Using exact sizes for initial modes
[    16.676] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    16.676] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.676] (II) intel(0): Kernel page flipping support detected, enabling
[    16.676] (==) intel(0): DPI set to (96, 96)
[    16.676] (II) Loading sub module "fb"
[    16.676] (II) LoadModule: "fb"
[    16.676] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.710] (II) Module fb: vendor="X.Org Foundation"
[    16.710] 	compiled for 1.14.1, module version = 1.0.0
[    16.710] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.710] (II) Loading sub module "dri2"
[    16.710] (II) LoadModule: "dri2"
[    16.710] (II) Module "dri2" already built-in
[    16.710] (==) Depth 24 pixmap format is 32 bpp
[    16.735] (II) intel(0): [DRI2] Setup complete
[    16.735] (II) intel(0): [DRI2]   DRI driver: i965
[    16.735] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    16.737] (II) UXA(0): Driver registered support for the following operations:
[    16.737] (II)         solid
[    16.737] (II)         copy
[    16.737] (II)         composite (RENDER acceleration)
[    16.737] (II)         put_image
[    16.737] (II)         get_image
[    16.737] (==) intel(0): Backing store disabled
[    16.737] (==) intel(0): Silken mouse enabled
[    16.757] (II) intel(0): Initializing HW Cursor
[    16.757] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.758] (==) intel(0): DPMS enabled
[    16.758] (==) intel(0): Intel XvMC decoder enabled
[    16.758] (II) intel(0): Set up textured video
[    16.758] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    16.758] (II) intel(0): direct rendering: DRI2 Enabled
[    16.758] (==) intel(0): hotplug detection: "enabled"
[    16.780] (--) RandR disabled
[    17.102] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    17.102] (II) AIGLX: enabled GLX_INTEL_swap_event
[    17.102] (II) AIGLX: enabled GLX_ARB_create_context
[    17.102] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    17.102] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    17.102] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    17.102] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    17.102] (II) AIGLX: Loaded and initialized i965
[    17.102] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.102] (II) intel(0): Setting screen physical size to 361 x 203
[    17.557] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    17.557] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.557] (**) Power Button: Applying InputClass "Keyboard Layout"
[    17.557] (**) Power Button: Applying InputClass "Joystick hat mapping"
[    17.557] (II) LoadModule: "evdev"
[    17.557] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.625] (II) Module evdev: vendor="X.Org Foundation"
[    17.625] 	compiled for 1.14.0, module version = 2.8.0
[    17.625] 	Module class: X.Org XInput Driver
[    17.625] 	ABI class: X.Org XInput driver, version 19.1
[    17.625] (II) Using input driver 'evdev' for 'Power Button'
[    17.625] (**) Power Button: always reports core events
[    17.625] (**) evdev: Power Button: Device: "/dev/input/event3"
[    17.625] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.625] (--) evdev: Power Button: Found keys
[    17.625] (II) evdev: Power Button: Configuring as keyboard
[    17.625] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    17.625] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.625] (**) Option "xkb_rules" "evdev"
[    17.625] (**) Option "xkb_model" "evdev"
[    17.625] (**) Option "xkb_layout" "be"
[    18.272] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    18.272] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.272] (**) Power Button: Applying InputClass "Keyboard Layout"
[    18.272] (**) Power Button: Applying InputClass "Joystick hat mapping"
[    18.272] (II) Using input driver 'evdev' for 'Power Button'
[    18.272] (**) Power Button: always reports core events
[    18.272] (**) evdev: Power Button: Device: "/dev/input/event0"
[    18.272] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.272] (--) evdev: Power Button: Found keys
[    18.272] (II) evdev: Power Button: Configuring as keyboard
[    18.272] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[    18.272] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    18.272] (**) Option "xkb_rules" "evdev"
[    18.272] (**) Option "xkb_model" "evdev"
[    18.272] (**) Option "xkb_layout" "be"
[    18.273] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    18.273] (**) Lid Switch: Applying InputClass "Joystick hat mapping"
[    18.273] (II) No input driver specified, ignoring this device.
[    18.273] (II) This device may have been added with another device file.
[    18.274] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    18.274] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    18.274] (**) Sleep Button: Applying InputClass "Keyboard Layout"
[    18.274] (**) Sleep Button: Applying InputClass "Joystick hat mapping"
[    18.274] (II) Using input driver 'evdev' for 'Sleep Button'
[    18.274] (**) Sleep Button: always reports core events
[    18.274] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    18.274] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    18.274] (--) evdev: Sleep Button: Found keys
[    18.274] (II) evdev: Sleep Button: Configuring as keyboard
[    18.274] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2/event2"
[    18.274] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    18.274] (**) Option "xkb_rules" "evdev"
[    18.274] (**) Option "xkb_model" "evdev"
[    18.274] (**) Option "xkb_layout" "be"
[    18.275] (II) config/udev: Adding drm device (/dev/dri/card0)
[    18.276] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event12)
[    18.276] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[    18.276] (**) 1.3M HD WebCam: Applying InputClass "Keyboard Layout"
[    18.276] (**) 1.3M HD WebCam: Applying InputClass "Joystick hat mapping"
[    18.276] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[    18.276] (**) 1.3M HD WebCam: always reports core events
[    18.276] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event12"
[    18.276] (--) evdev: 1.3M HD WebCam: Vendor 0x4f2 Product 0xb23d
[    18.276] (--) evdev: 1.3M HD WebCam: Found keys
[    18.276] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[    18.277] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13/event12"
[    18.277] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 9)
[    18.277] (**) Option "xkb_rules" "evdev"
[    18.277] (**) Option "xkb_model" "evdev"
[    18.277] (**) Option "xkb_layout" "be"
[    18.278] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[    18.278] (**) HDA Digital PCBeep: Applying InputClass "Joystick hat mapping"
[    18.278] (II) No input driver specified, ignoring this device.
[    18.278] (II) This device may have been added with another device file.
[    18.278] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    18.278] (**) HDA Intel PCH Headphone: Applying InputClass "Joystick hat mapping"
[    18.278] (II) No input driver specified, ignoring this device.
[    18.278] (II) This device may have been added with another device file.
[    18.279] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[    18.279] (**) HDA Intel PCH HDMI/DP,pcm=3: Applying InputClass "Joystick hat mapping"
[    18.279] (II) No input driver specified, ignoring this device.
[    18.279] (II) This device may have been added with another device file.
[    18.279] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    18.279] (**) HDA Intel PCH Mic: Applying InputClass "Joystick hat mapping"
[    18.279] (II) No input driver specified, ignoring this device.
[    18.279] (II) This device may have been added with another device file.
[    18.280] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    18.280] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.280] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Layout"
[    18.280] (**) AT Translated Set 2 keyboard: Applying InputClass "Joystick hat mapping"
[    18.280] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.280] (**) AT Translated Set 2 keyboard: always reports core events
[    18.280] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    18.280] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.280] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.280] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    18.280] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    18.280] (**) Option "xkb_rules" "evdev"
[    18.281] (**) Option "xkb_model" "evdev"
[    18.281] (**) Option "xkb_layout" "be"
[    18.282] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[    18.282] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    18.282] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    18.282] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    18.282] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Joystick hat mapping"
[    18.282] (II) LoadModule: "synaptics"
[    18.282] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.346] (II) Module synaptics: vendor="X.Org Foundation"
[    18.346] 	compiled for 1.14.0, module version = 1.7.0
[    18.346] 	Module class: X.Org XInput Driver
[    18.346] 	ABI class: X.Org XInput driver, version 19.1
[    18.346] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    18.346] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.346] (**) Option "Device" "/dev/input/event13"
[    18.356] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    18.356] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[    18.356] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[    18.356] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    18.356] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    18.356] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    18.356] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    18.356] (**) Option "TapButton1" "1"
[    18.356] (**) Option "TapButton2" "2"
[    18.356] (**) Option "TapButton3" "3"
[    18.356] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.357] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event13"
[    18.360] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    18.360] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    18.360] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    18.360] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[    18.360] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    18.360] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    18.360] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    18.360] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    18.360] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.360] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    18.360] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    18.361] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    18.361] (**) PC Speaker: Applying InputClass "Joystick hat mapping"
[    18.361] (II) No input driver specified, ignoring this device.
[    18.361] (II) This device may have been added with another device file.
[    18.361] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[    18.361] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    18.361] (**) Acer WMI hotkeys: Applying InputClass "Keyboard Layout"
[    18.361] (**) Acer WMI hotkeys: Applying InputClass "Joystick hat mapping"
[    18.361] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[    18.361] (**) Acer WMI hotkeys: always reports core events
[    18.361] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event5"
[    18.361] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[    18.361] (--) evdev: Acer WMI hotkeys: Found keys
[    18.361] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[    18.361] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
[    18.361] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 12)
[    18.362] (**) Option "xkb_rules" "evdev"
[    18.362] (**) Option "xkb_model" "evdev"
[    18.362] (**) Option "xkb_layout" "be"
[    18.362] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event11)
[    18.362] (**) Acer BMA150 accelerometer: Applying InputClass "Joystick hat mapping"
[    18.362] (II) No input driver specified, ignoring this device.
[    18.362] (II) This device may have been added with another device file.
[    18.362] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    18.362] (**) Acer BMA150 accelerometer: Applying InputClass "Joystick hat mapping"
[    18.362] (II) No input driver specified, ignoring this device.
[    18.362] (II) This device may have been added with another device file.
[    24.883] (II) intel(0): EDID vendor "LGD", prod id 592
[    24.883] (II) intel(0): Printing DDC gathered Modelines:
[    24.883] (II) intel(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    28.539] (II) intel(0): EDID vendor "LGD", prod id 592
[    28.539] (II) intel(0): Printing DDC gathered Modelines:
[    28.539] (II) intel(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    31.700] (II) intel(0): EDID vendor "LGD", prod id 592
[    31.700] (II) intel(0): Printing DDC gathered Modelines:
[    31.700] (II) intel(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    46.360] (WW) intel(0): flip queue failed: Input/output error
[    48.137] (WW) intel(0): Page flip failed: Input/output error
[    95.196] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[    95.196] (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
[    95.234] (II) AIGLX: Suspending AIGLX clients for VT switch
[    96.624] (II) AIGLX: Resuming AIGLX clients after VT switch
[    96.643] (II) intel(0): EDID vendor "LGD", prod id 592
[    96.643] (II) intel(0): Printing DDC gathered Modelines:
[    96.643] (II) intel(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    96.716] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   101.153] (II) AIGLX: Suspending AIGLX clients for VT switch
[   102.239] (II) AIGLX: Resuming AIGLX clients after VT switch
[   102.250] (II) intel(0): EDID vendor "LGD", prod id 592
[   102.250] (II) intel(0): Printing DDC gathered Modelines:
[   102.250] (II) intel(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[   102.318] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   136.936] (II) AIGLX: Suspending AIGLX clients for VT switch

EDIT 2:

Il semblerait que le soucis vient en fait de MESA, le driver pour les cartes intel.
Le soucis a été réglé pour moi en ajoutant:

Code : Tout sélectionner

i915.i915_enable_rc6=0

à la fin de la ligne APPEND=... dans /boot/syslinux/syslinux.cfg

Je confirme... le fait de rajouter l'option i915 a résolu mon problème (non apparition de gdm)

Moi aussi,

il me faut aller voir les erreurs quand même ...
Mais un grand merci !!

Salut,

content de voir que vous avez résolu le problème avec GDM 3.8. Avez-vous eu d'autres difficultés avec le passage en 3.8 ?
J'aimerai beaucoup faire la mise à jour mais comme c'est un ordinateur professionnel…

Archlinux.fr [Forums]

[GNOME 3.8] Ne se lance pas après mise à jour (Résolu)

[GNOME 3.8] Ne se lance pas après mise à jour (Résolu)

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour

Re: [GNOME 3.8] Ne se lance pas après mise à jour