Code : Tout sélectionner
[ 5.952]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 5.952] X Protocol Version 11, Revision 0
[ 5.952] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 5.952] Current Operating System: Linux eric 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 5.952] Kernel command line: root=/dev/disk/by-uuid/9c2da8a1-a0b8-493e-9340-3b632b64cebb elevator=deadline ro vga=792 noatime console=tty1 quiet
[ 5.952] Build Date: 17 April 2013 02:37:06PM
[ 5.952]
[ 5.952] Current version of pixman: 0.30.0
[ 5.952] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.952] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.952] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 23:24:06 2013
[ 5.958] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.963] (==) ServerLayout "Layout0"
[ 5.963] (**) |-->Screen "Screen0" (0)
[ 5.963] (**) | |-->Monitor "Monitor0"
[ 5.963] (**) | |-->Device "Device0"
[ 5.963] (**) |-->Input Device "Keyboard0"
[ 5.963] (**) |-->Input Device "Mouse0"
[ 5.963] (**) Option "Xinerama" "0"
[ 5.963] (==) Automatically adding devices
[ 5.963] (==) Automatically enabling devices
[ 5.963] (==) Automatically adding GPU devices
[ 5.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 5.967] Entry deleted from font path.
[ 5.969] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 5.969] Entry deleted from font path.
[ 5.969] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 5.970] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 5.970] Entry deleted from font path.
[ 5.970] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 5.970] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 5.970] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.970] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 5.970] (WW) Disabling Keyboard0
[ 5.970] (WW) Disabling Mouse0
[ 5.970] (II) Loader magic: 0x7fcc20
[ 5.970] (II) Module ABI versions:
[ 5.970] X.Org ANSI C Emulation: 0.4
[ 5.970] X.Org Video Driver: 14.1
[ 5.970] X.Org XInput driver : 19.1
[ 5.970] X.Org Server Extension : 7.0
[ 5.971] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.972] (--) PCI:*(0:1:0:0) 10de:0e22:1043:835e rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 5.972] (--) PCI: (0:5:0:0) 109e:036e:0070:13eb rev 17, Mem @ 0xfaffe000/4096
[ 5.972] Initializing built-in extension Generic Event Extension
[ 5.972] Initializing built-in extension SHAPE
[ 5.972] Initializing built-in extension MIT-SHM
[ 5.972] Initializing built-in extension XInputExtension
[ 5.972] Initializing built-in extension XTEST
[ 5.972] Initializing built-in extension BIG-REQUESTS
[ 5.972] Initializing built-in extension SYNC
[ 5.972] Initializing built-in extension XKEYBOARD
[ 5.972] Initializing built-in extension XC-MISC
[ 5.972] Initializing built-in extension SECURITY
[ 5.972] Initializing built-in extension XINERAMA
[ 5.972] Initializing built-in extension XFIXES
[ 5.972] Initializing built-in extension RENDER
[ 5.972] Initializing built-in extension RANDR
[ 5.972] Initializing built-in extension COMPOSITE
[ 5.972] Initializing built-in extension DAMAGE
[ 5.972] Initializing built-in extension MIT-SCREEN-SAVER
[ 5.972] Initializing built-in extension DOUBLE-BUFFER
[ 5.972] Initializing built-in extension RECORD
[ 5.972] Initializing built-in extension DPMS
[ 5.972] Initializing built-in extension X-Resource
[ 5.972] Initializing built-in extension XVideo
[ 5.972] Initializing built-in extension XVideo-MotionCompensation
[ 5.972] Initializing built-in extension XFree86-VidModeExtension
[ 5.972] Initializing built-in extension XFree86-DGA
[ 5.972] Initializing built-in extension XFree86-DRI
[ 5.972] Initializing built-in extension DRI2
[ 5.972] (II) LoadModule: "glx"
[ 5.978] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.169] (II) Module glx: vendor="NVIDIA Corporation"
[ 6.169] compiled for 4.0.2, module version = 1.0.0
[ 6.169] Module class: X.Org Server Extension
[ 6.169] (II) NVIDIA GLX Module 319.23 Thu May 16 19:23:10 PDT 2013
[ 6.171] Loading extension GLX
[ 6.171] (II) LoadModule: "nvidia"
[ 6.176] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6.198] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.198] compiled for 4.0.2, module version = 1.0.0
[ 6.198] Module class: X.Org Video Driver
[ 6.201] (II) NVIDIA dlloader X Driver 319.23 Thu May 16 19:02:20 PDT 2013
[ 6.201] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.203] (++) using VT number 7
[ 6.224] (II) Loading sub module "fb"
[ 6.224] (II) LoadModule: "fb"
[ 6.225] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.231] (II) Module fb: vendor="X.Org Foundation"
[ 6.231] compiled for 1.14.1, module version = 1.0.0
[ 6.231] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.231] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 6.231] (II) Loading sub module "wfb"
[ 6.231] (II) LoadModule: "wfb"
[ 6.231] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6.236] (II) Module wfb: vendor="X.Org Foundation"
[ 6.236] compiled for 1.14.1, module version = 1.0.0
[ 6.236] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.236] (II) Loading sub module "shadow"
[ 6.236] (II) LoadModule: "shadow"
[ 6.236] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 6.238] (II) Module shadow: vendor="X.Org Foundation"
[ 6.238] compiled for 1.14.1, module version = 1.1.0
[ 6.238] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.238] (II) Loading sub module "ramdac"
[ 6.238] (II) LoadModule: "ramdac"
[ 6.238] (II) Module "ramdac" already built-in
[ 6.241] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6.241] (==) NVIDIA(0): RGB weight 888
[ 6.241] (==) NVIDIA(0): Default visual is TrueColor
[ 6.241] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.241] (**) NVIDIA(0): Option "Stereo" "0"
[ 6.241] (**) NVIDIA(0): Stereo disabled by request
[ 6.241] (**) NVIDIA(0): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
[ 6.241] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.860] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[ 6.860] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 6.889] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[ 6.889] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 6.891] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
[ 6.891] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 6.891] (--) NVIDIA(0): VideoBIOS: 70.04.2e.00.04
[ 6.891] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6.892] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
[ 6.892] (--) NVIDIA(0): CRT-0
[ 6.892] (--) NVIDIA(0): LG Electronics 37LB2R-ZH (CRT-1) (connected)
[ 6.892] (--) NVIDIA(0): Ancor Communications Inc ASUS VH232 (DFP-0) (boot, connected)
[ 6.892] (--) NVIDIA(0): DFP-1
[ 6.892] (--) NVIDIA(0): DFP-2
[ 6.893] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 6.893] (--) NVIDIA(0): LG Electronics 37LB2R-ZH (CRT-1): 400.0 MHz maximum pixel clock
[ 6.893] (--) NVIDIA(0): Ancor Communications Inc ASUS VH232 (DFP-0): 330.0 MHz maximum pixel clock
[ 6.893] (--) NVIDIA(0): Ancor Communications Inc ASUS VH232 (DFP-0): Internal Dual Link TMDS
[ 6.893] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 6.893] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 6.893] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[ 6.893] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 6.893] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.893] (**) NVIDIA(0): device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[ 6.893] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 6.893] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.893] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[ 6.893] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 6.893] (**) NVIDIA(0): devices.)
[ 6.895] (II) NVIDIA(0): Validated MetaModes:
[ 6.895] (II) NVIDIA(0): "DFP:nvidia-auto-select+0+0"
[ 6.895] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 6.915] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[ 6.915] (--) NVIDIA(0): option
[ 6.915] (--) Depth 24 pixmap format is 32 bpp
[ 6.915] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 6.915] (II) NVIDIA: access.
[ 6.918] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 6.918] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 6.918] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 6.918] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 6.918] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 6.918] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 6.918] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 6.918] (II) NVIDIA(0): Config Options in the README.
[ 6.919] (II) NVIDIA(0): Setting mode "DFP:nvidia-auto-select+0+0"
[ 6.953] Loading extension NV-GLX
[ 6.998] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6.998] (==) NVIDIA(0): Backing store disabled
[ 6.998] (==) NVIDIA(0): Silken mouse enabled
[ 6.998] (**) NVIDIA(0): DPMS enabled
[ 6.998] Loading extension NV-CONTROL
[ 6.999] Loading extension XINERAMA
[ 6.999] (II) Loading sub module "dri2"
[ 6.999] (II) LoadModule: "dri2"
[ 6.999] (II) Module "dri2" already built-in
[ 6.999] (II) NVIDIA(0): [DRI2] Setup complete
[ 6.999] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 6.999] (--) RandR disabled
[ 7.005] (II) Initializing extension GLX
[ 7.080] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 7.080] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.080] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 7.080] (II) LoadModule: "evdev"
[ 7.080] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.081] (II) Module evdev: vendor="X.Org Foundation"
[ 7.081] compiled for 1.14.0, module version = 2.8.0
[ 7.081] Module class: X.Org XInput Driver
[ 7.081] ABI class: X.Org XInput driver, version 19.1
[ 7.081] (II) Using input driver 'evdev' for 'Power Button'
[ 7.081] (**) Power Button: always reports core events
[ 7.081] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 7.081] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.081] (--) evdev: Power Button: Found keys
[ 7.081] (II) evdev: Power Button: Configuring as keyboard
[ 7.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 7.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.081] (**) Option "xkb_rules" "evdev"
[ 7.081] (**) Option "xkb_model" "evdev"
[ 7.081] (**) Option "xkb_layout" "fr"
[ 7.081] (**) Option "xkb_variant" "latin9"
[ 7.110] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 7.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.110] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 7.110] (II) Using input driver 'evdev' for 'Power Button'
[ 7.110] (**) Power Button: always reports core events
[ 7.110] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 7.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.110] (--) evdev: Power Button: Found keys
[ 7.110] (II) evdev: Power Button: Configuring as keyboard
[ 7.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 7.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 7.110] (**) Option "xkb_rules" "evdev"
[ 7.110] (**) Option "xkb_model" "evdev"
[ 7.110] (**) Option "xkb_layout" "fr"
[ 7.110] (**) Option "xkb_variant" "latin9"
[ 7.110] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.110] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 7.110] (II) No input driver specified, ignoring this device.
[ 7.110] (II) This device may have been added with another device file.
[ 7.111] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[ 7.111] (II) No input driver specified, ignoring this device.
[ 7.111] (II) This device may have been added with another device file.
[ 7.111] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 7.111] (II) No input driver specified, ignoring this device.
[ 7.111] (II) This device may have been added with another device file.
[ 7.111] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[ 7.111] (II) No input driver specified, ignoring this device.
[ 7.111] (II) This device may have been added with another device file.
[ 7.111] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 7.112] (II) No input driver specified, ignoring this device.
[ 7.112] (II) This device may have been added with another device file.
[ 7.112] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 7.112] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 7.112] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 7.112] (**) Logitech USB Receiver: always reports core events
[ 7.112] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 7.112] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
[ 7.112] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 7.112] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 7.112] (--) evdev: Logitech USB Receiver: Found relative axes
[ 7.112] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 7.112] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 7.112] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 7.112] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 7.112] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/input/input0/event0"
[ 7.112] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[ 7.112] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 7.112] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 7.112] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 7.112] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 7.112] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 7.112] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 7.113] (II) No input driver specified, ignoring this device.
[ 7.113] (II) This device may have been added with another device file.
[ 7.113] (II) config/udev: Adding input device Wacom Graphire3 (/dev/input/event5)
[ 7.113] (**) Wacom Graphire3: Applying InputClass "evdev tablet catchall"
[ 7.113] (**) Wacom Graphire3: Applying InputClass "Wacom class"
[ 7.113] (II) LoadModule: "wacom"
[ 7.113] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 7.114] (II) Module wacom: vendor="X.Org Foundation"
[ 7.114] compiled for 1.14.0, module version = 0.20.0
[ 7.114] Module class: X.Org XInput Driver
[ 7.114] ABI class: X.Org XInput driver, version 19.1
[ 7.114] (II) Using input driver 'wacom' for 'Wacom Graphire3'
[ 7.114] (**) Wacom Graphire3: always reports core events
[ 7.114] (**) Option "Device" "/dev/input/event5"
[ 7.114] (II) Wacom Graphire3: type not specified, assuming 'stylus'.
[ 7.114] (II) Wacom Graphire3: other types will be automatically added.
[ 7.114] (--) Wacom Graphire3 stylus: using pressure threshold of 27 for button 1
[ 7.114] (--) Wacom Graphire3 stylus: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000 tilt=disabled
[ 7.114] (II) Wacom Graphire3 stylus: hotplugging dependent devices.
[ 7.114] (EE) Wacom Graphire3 stylus: Invalid type 'touch' for this device.
[ 7.114] (EE) Wacom Graphire3 stylus: Invalid type 'pad' for this device.
[ 7.114] (II) Wacom Graphire3 stylus: hotplugging completed.
[ 7.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.1/8-1.1:1.0/input/input5/event5"
[ 7.120] (II) XINPUT: Adding extended input device "Wacom Graphire3 stylus" (type: STYLUS, id 9)
[ 7.120] (**) Wacom Graphire3 stylus: (accel) keeping acceleration scheme 1
[ 7.120] (**) Wacom Graphire3 stylus: (accel) acceleration profile 0
[ 7.120] (**) Wacom Graphire3 stylus: (accel) acceleration factor: 2.000
[ 7.120] (**) Wacom Graphire3 stylus: (accel) acceleration threshold: 4
[ 7.120] (II) config/udev: Adding input device Wacom Graphire3 (/dev/input/mouse2)
[ 7.120] (II) No input driver specified, ignoring this device.
[ 7.120] (II) This device may have been added with another device file.
[ 7.121] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:401b (/dev/input/event1)
[ 7.121] (**) Logitech Unifying Device. Wireless PID:401b: Applying InputClass "evdev pointer catchall"
[ 7.121] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:401b'
[ 7.121] (**) Logitech Unifying Device. Wireless PID:401b: always reports core events
[ 7.121] (**) evdev: Logitech Unifying Device. Wireless PID:401b: Device: "/dev/input/event1"
[ 7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Vendor 0x46d Product 0xc52b
[ 7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found 20 mouse buttons
[ 7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found scroll wheel(s)
[ 7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found relative axes
[ 7.121] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found x and y relative axes
[ 7.121] (II) evdev: Logitech Unifying Device. Wireless PID:401b: Configuring as mouse
[ 7.121] (II) evdev: Logitech Unifying Device. Wireless PID:401b: Adding scrollwheel support
[ 7.121] (**) evdev: Logitech Unifying Device. Wireless PID:401b: YAxisMapping: buttons 4 and 5
[ 7.121] (**) evdev: Logitech Unifying Device. Wireless PID:401b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.2/8-1.2:1.2/0003:046D:C52B.0005/input/input1/event1"
[ 7.121] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:401b" (type: MOUSE, id 10)
[ 7.121] (II) evdev: Logitech Unifying Device. Wireless PID:401b: initialized for relative axes.
[ 7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) keeping acceleration scheme 1
[ 7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration profile 0
[ 7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration factor: 2.000
[ 7.121] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration threshold: 4
[ 7.121] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:401b (/dev/input/mouse1)
[ 7.121] (II) No input driver specified, ignoring this device.
[ 7.121] (II) This device may have been added with another device file.
[ 7.122] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4016 (/dev/input/event2)
[ 7.122] (**) Logitech Unifying Device. Wireless PID:4016: Applying InputClass "evdev keyboard catchall"
[ 7.122] (**) Logitech Unifying Device. Wireless PID:4016: Applying InputClass "Keyboard Layout"
[ 7.122] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4016'
[ 7.122] (**) Logitech Unifying Device. Wireless PID:4016: always reports core events
[ 7.122] (**) evdev: Logitech Unifying Device. Wireless PID:4016: Device: "/dev/input/event2"
[ 7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Vendor 0x46d Product 0xc52b
[ 7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found 1 mouse buttons
[ 7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found scroll wheel(s)
[ 7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found relative axes
[ 7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Forcing relative x/y axes to exist.
[ 7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found absolute axes
[ 7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Forcing absolute x/y axes to exist.
[ 7.122] (--) evdev: Logitech Unifying Device. Wireless PID:4016: Found keys
[ 7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Configuring as mouse
[ 7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Configuring as keyboard
[ 7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: Adding scrollwheel support
[ 7.122] (**) evdev: Logitech Unifying Device. Wireless PID:4016: YAxisMapping: buttons 4 and 5
[ 7.122] (**) evdev: Logitech Unifying Device. Wireless PID:4016: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.2/8-1.2:1.2/0003:046D:C52B.0005/input/input2/event2"
[ 7.122] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4016" (type: KEYBOARD, id 11)
[ 7.122] (**) Option "xkb_rules" "evdev"
[ 7.122] (**) Option "xkb_model" "evdev"
[ 7.122] (**) Option "xkb_layout" "fr"
[ 7.122] (**) Option "xkb_variant" "latin9"
[ 7.122] (II) evdev: Logitech Unifying Device. Wireless PID:4016: initialized for relative axes.
[ 7.122] (WW) evdev: Logitech Unifying Device. Wireless PID:4016: ignoring absolute axes.
[ 7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) keeping acceleration scheme 1
[ 7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) acceleration profile 0
[ 7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) acceleration factor: 2.000
[ 7.122] (**) Logitech Unifying Device. Wireless PID:4016: (accel) acceleration threshold: 4
[ 7.123] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 7.123] (II) No input driver specified, ignoring this device.
[ 7.123] (II) This device may have been added with another device file.
[ 7.127] (**) Wacom Graphire3 eraser: Applying InputClass "evdev tablet catchall"
[ 7.127] (**) Wacom Graphire3 eraser: Applying InputClass "Wacom class"
[ 7.127] (II) Using input driver 'wacom' for 'Wacom Graphire3 eraser'
[ 7.127] (**) Wacom Graphire3 eraser: always reports core events
[ 7.127] (**) Option "Device" "/dev/input/event5"
[ 7.127] (**) Option "Type" "eraser"
[ 7.127] (--) Wacom Graphire3 eraser: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000 tilt=disabled
[ 7.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.1/8-1.1:1.0/input/input5/event5"
[ 7.127] (II) XINPUT: Adding extended input device "Wacom Graphire3 eraser" (type: ERASER, id 12)
[ 7.127] (**) Wacom Graphire3 eraser: (accel) keeping acceleration scheme 1
[ 7.127] (**) Wacom Graphire3 eraser: (accel) acceleration profile 0
[ 7.127] (**) Wacom Graphire3 eraser: (accel) acceleration factor: 2.000
[ 7.127] (**) Wacom Graphire3 eraser: (accel) acceleration threshold: 4
[ 7.127] (**) Wacom Graphire3 cursor: Applying InputClass "evdev tablet catchall"
[ 7.127] (**) Wacom Graphire3 cursor: Applying InputClass "Wacom class"
[ 7.127] (II) Using input driver 'wacom' for 'Wacom Graphire3 cursor'
[ 7.127] (**) Wacom Graphire3 cursor: always reports core events
[ 7.127] (**) Option "Device" "/dev/input/event5"
[ 7.127] (**) Option "Type" "cursor"
[ 7.127] (--) Wacom Graphire3 cursor: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000 tilt=disabled
[ 7.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.1/8-1.1:1.0/input/input5/event5"
[ 7.127] (II) XINPUT: Adding extended input device "Wacom Graphire3 cursor" (type: CURSOR, id 13)
[ 7.128] (**) Wacom Graphire3 cursor: (accel) keeping acceleration scheme 1
[ 7.128] (**) Wacom Graphire3 cursor: (accel) acceleration profile 0
[ 7.128] (**) Wacom Graphire3 cursor: (accel) acceleration factor: 2.000
[ 7.128] (**) Wacom Graphire3 cursor: (accel) acceleration threshold: 4
[ 8.046] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event6)
[ 8.046] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 8.046] (**) UVC Camera (046d:0825): Applying InputClass "Keyboard Layout"
[ 8.046] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[ 8.046] (**) UVC Camera (046d:0825): always reports core events
[ 8.046] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event6"
[ 8.046] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[ 8.046] (--) evdev: UVC Camera (046d:0825): Found keys
[ 8.046] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[ 8.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4:1.0/input/input6/event6"
[ 8.046] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 14)
[ 8.046] (**) Option "xkb_rules" "evdev"
[ 8.046] (**) Option "xkb_model" "evdev"
[ 8.046] (**) Option "xkb_layout" "fr"
[ 8.046] (**) Option "xkb_variant" "latin9"
[ 25.165] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[ 25.165] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 25.165] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 25.165] (**) NVIDIA(0): device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[ 25.165] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 25.195] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[ 25.195] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 25.195] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 25.195] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[ 25.195] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 25.195] (**) NVIDIA(0): devices.)
[ 25.401] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1360x768 +1920+0 {ViewPortIn=1360x768, ViewPortOut=1360x768+0+0}"
[ 25.468] (II) NVIDIA(0): Setting mode "DVI-I-2: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-1: nvidia-auto-select @1360x768 +1920+0 {ViewPortIn=1360x768, ViewPortOut=1360x768+0+0}"
[ 25.790] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[ 25.790] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 25.790] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 25.790] (**) NVIDIA(0): device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[ 25.790] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 25.820] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[ 25.820] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 25.820] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 25.820] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[ 25.820] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 25.820] (**) NVIDIA(0): devices.)
[ 26.225] (II) NVIDIA(GPU-0): Display (LG Electronics 37LB2R-ZH (CRT-1)) does not support
[ 26.225] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 26.225] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 26.225] (**) NVIDIA(0): device LG Electronics 37LB2R-ZH (CRT-1) (Using EDID
[ 26.225] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 26.255] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH232 (DFP-0)) does not
[ 26.255] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 26.255] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 26.255] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH232 (DFP-0) (Using
[ 26.255] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 26.255] (**) NVIDIA(0): devices.)