Archlinux.fr [Forums] • [Pacman] Les MAJ s'arrêtent en cours de route [resolu]

Page 1 sur 2

[Pacman] Les MAJ s'arrêtent en cours de route [resolu]

Publié : jeu. 08 août 2013, 21:01

par bpier

Je rencontre depuis pas mal de temps maintenant un problème avec Pacman : sur des MAJ, il s'arrête en cours de route. Autrement dit, il bloque après la MAJ d'un paquet. Du coup, je dois, à chaque fois, relancer la procédure, type pacman -Syu. Sur la dernière MAJ, pacman a ainsi bloqué sur grub, glib... des paquets majeurs. Je n'ai rien trouvé sur le net concernant ce souci, peut-être parce que je n'ai pas choisi les bons mots-clés. Enfin, votre aide me sera utile.
Pierre

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 21:12

par onyx67

T'a quoi comme message quand ça bloque?
Tu peux aussi voir et poster /var/log/pacman.log (en utlisant les balises Code

)

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 21:13

par widapit

Salut !

je sais pas trop... quel mirroir utilises-tu ?
sinon une mauvaise connexion peut-être

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 21:22

par benjarobin

Je ne suis pas sûr de comprendre ce que tu veux dire par bloqué ? Un screenshot ?

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 21:27

par bpier

Mon pacman.log (attention ! Il est long, car la MAJ était lourde et j'ai dû la relancer 5/6 fois pour arriver au bout) :

Code : Tout sélectionner

[2013-08-08 19:32] [PACMAN] Running 'pacman --color auto -Sy'
[2013-08-08 19:32] [PACMAN] synchronizing package lists
[2013-08-08 19:32] [PACMAN] starting full system upgrade
[2013-08-08 19:32] [PACMAN] Running 'pacman -S poppler'
[2013-08-08 19:34] [PACMAN] Running 'pacman -S poppler-glib'
[2013-08-08 19:35] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 19:35] [PACMAN] synchronizing package lists
[2013-08-08 19:35] [PACMAN] starting full system upgrade
[2013-08-08 19:55] [PACMAN] Running 'pacman -R zita-resampler'
[2013-08-08 19:55] [PACMAN] Running 'pacman -R gxtuner'
[2013-08-08 19:55] [PACMAN] removed gxtuner (2.0-1)
[2013-08-08 19:55] [PACMAN] Running 'pacman -R zita-resampler'
[2013-08-08 19:55] [PACMAN] removed zita-resampler (1.3.0-1)
[2013-08-08 19:56] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 19:56] [PACMAN] synchronizing package lists
[2013-08-08 19:56] [PACMAN] starting full system upgrade
[2013-08-08 19:58] [PACMAN] removed poppler-qt (0.22.5-1)
[2013-08-08 20:13] [PACMAN] upgraded gcc-libs (4.8.1-1 -> 4.8.1-2)
[2013-08-08 20:13] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:13] [PACMAN] synchronizing package lists
[2013-08-08 20:13] [PACMAN] starting full system upgrade
[2013-08-08 20:14] [PACMAN] upgraded poppler (0.22.5-1 -> 0.24.0-1)
[2013-08-08 20:14] [PACMAN] installed poppler-qt4 (0.24.0-1)
[2013-08-08 20:14] [PACMAN] upgraded a52dec (0.7.4-6 -> 0.7.4-7)
[2013-08-08 20:14] [PACMAN] upgraded alsa-plugins (1.0.27-1 -> 1.0.27-2)
[2013-08-08 20:14] [PACMAN] upgraded alsa-tools (1.0.27-3 -> 1.0.27-4)
[2013-08-08 20:14] [PACMAN] upgraded alsa-utils (1.0.27.1-2 -> 1.0.27.2-1)
[2013-08-08 20:14] [ALPM-SCRIPTLET]   > Ardour now supports video timeline. To use this feature, please get
[2013-08-08 20:14] [ALPM-SCRIPTLET]   > static builds of the required external runtime dependencies from:
[2013-08-08 20:14] [ALPM-SCRIPTLET] 
[2013-08-08 20:14] [ALPM-SCRIPTLET]       http://x42.github.io/harvid/
[2013-08-08 20:14] [ALPM-SCRIPTLET] 
[2013-08-08 20:14] [ALPM-SCRIPTLET]   > You may then install the binaries in /usr/local/bin and import a video
[2013-08-08 20:14] [ALPM-SCRIPTLET]   > via Session > Open Video.
[2013-08-08 20:14] [ALPM-SCRIPTLET] 
[2013-08-08 20:14] [ALPM-SCRIPTLET]   > Due to uncertainties with regards to program stability, 'harvid' is
[2013-08-08 20:14] [ALPM-SCRIPTLET]   > currently not packaged in our repositories.
[2013-08-08 20:14] [ALPM-SCRIPTLET] 
[2013-08-08 20:14] [ALPM-SCRIPTLET]   > In addition to the timeline, video can be monitored with xjadeo.
[2013-08-08 20:14] [PACMAN] upgraded ardour (3.2-1 -> 3.3-1)
[2013-08-08 20:14] [PACMAN] upgraded glib2 (2.36.3-2 -> 2.36.3-3)
[2013-08-08 20:14] [PACMAN] upgraded avahi (0.6.31-9 -> 0.6.31-10)
[2013-08-08 20:14] [PACMAN] upgraded avidemux-cli (2.5.6-6 -> 2.5.6-7)
[2013-08-08 20:14] [PACMAN] upgraded avidemux-qt (2.5.6-6 -> 2.5.6-7)
[2013-08-08 20:16] [PACMAN] upgraded bison (2.7.1-1 -> 3.0-1)
[2013-08-08 20:16] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:16] [PACMAN] synchronizing package lists
[2013-08-08 20:16] [PACMAN] starting full system upgrade
[2013-08-08 20:17] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:17] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:17] [PACMAN] upgraded colord (1.0.2-1 -> 1.0.2-2)
[2013-08-08 20:17] [PACMAN] upgraded cracklib (2.8.22-3 -> 2.9.0-1)
[2013-08-08 20:17] [PACMAN] upgraded cups-filters (1.0.35-2 -> 1.0.35-4)
[2013-08-08 20:17] [PACMAN] upgraded dhcpcd (5.6.8-3 -> 6.0.4-1)
[2013-08-08 20:17] [PACMAN] upgraded dosfstools (3.0.20-1 -> 3.0.22-1)
[2013-08-08 20:17] [PACMAN] upgraded x264 (20130206-1 -> 20130702-2)
[2013-08-08 20:17] [PACMAN] upgraded ffmpeg (1:1.2.1-1 -> 1:2.0-2)
[2013-08-08 20:17] [PACMAN] upgraded ffmpeg-compat (20120509-3 -> 1:0.10.8-4)
[2013-08-08 20:17] [PACMAN] upgraded xdg-utils (1.1.0.git20121008-2 -> 1.1.0.git20130520-1)
[2013-08-08 20:17] [PACMAN] upgraded filezilla (3.7.1.1-1 -> 3.7.3-1)
[2013-08-08 20:17] [PACMAN] upgraded nspr (4.9.6-1 -> 4.10-2)
[2013-08-08 20:17] [PACMAN] upgraded nss (3.14.3-3 -> 3.15.1-1)
[2013-08-08 20:17] [PACMAN] upgraded firefox (22.0-1 -> 23.0-1)
[2013-08-08 20:17] [PACMAN] upgraded firefox-i18n-fr (22.0-1 -> 23.0-1)
[2013-08-08 20:17] [PACMAN] upgraded fuse (2.9.2-3 -> 2.9.3-1)
[2013-08-08 20:19] [PACMAN] upgraded gcc (4.8.1-1 -> 4.8.1-2)
[2013-08-08 20:19] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:19] [PACMAN] synchronizing package lists
[2013-08-08 20:19] [PACMAN] starting full system upgrade
[2013-08-08 20:21] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:21] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:21] [PACMAN] upgraded gegl (0.2.0-8 -> 0.2.0-9)
[2013-08-08 20:21] [PACMAN] upgraded xcb-proto (1.8-1 -> 1.8-2)
[2013-08-08 20:21] [PACMAN] upgraded libxcb (1.9.1-1 -> 1.9.1-2)
[2013-08-08 20:21] [PACMAN] upgraded libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-08 20:21] [PACMAN] upgraded giflib (4.2.1-3 -> 5.0.4-2)
[2013-08-08 20:21] [PACMAN] upgraded git (1.8.3.3-1 -> 1.8.3.4-1)
[2013-08-08 20:21] [PACMAN] upgraded glib (1.2.10-9 -> 1.2.10-10)
[2013-08-08 20:21] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:21] [PACMAN] synchronizing package lists
[2013-08-08 20:21] [PACMAN] starting full system upgrade
[2013-08-08 20:22] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:22] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:22] [PACMAN] upgraded glib-perl (1.280-3 -> 1.301-1)
[2013-08-08 20:22] [PACMAN] upgraded gnome-icon-theme (3.8.2-1 -> 3.8.3-1)
[2013-08-08 20:22] [PACMAN] upgraded gnome-themes-standard (3.8.1-1 -> 3.8.3-1)
[2013-08-08 20:30] [PACMAN] upgraded gnutls (3.2.2-1 -> 3.2.3-1)
[2013-08-08 20:30] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:30] [PACMAN] synchronizing package lists
[2013-08-08 20:30] [PACMAN] starting full system upgrade
[2013-08-08 20:31] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:31] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:33] [PACMAN] upgraded gpgme (1.4.2-1 -> 1.4.2-2)
[2013-08-08 20:33] [PACMAN] Running 'pacman -S libvdpau-va-gl'
[2013-08-08 20:34] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-root/PKGDEST.XID/libvdpau-va-gl-20130808-1-i686.pkg.tar.xz'
[2013-08-08 20:34] [PACMAN] installed libvdpau-va-gl (20130808-1)
[2013-08-08 20:34] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:34] [PACMAN] synchronizing package lists
[2013-08-08 20:34] [PACMAN] starting full system upgrade
[2013-08-08 20:35] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:35] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:35] [ALPM] warning: directory permissions differ on /boot/
filesystem: 777  package: 755
[2013-08-08 20:35] [ALPM] warning: /boot/grub/grub.cfg installed as /boot/grub/grub.cfg.pacnew
[2013-08-08 20:36] [PACMAN] upgraded grub (2.00.5043-2 -> 2.00.5086-1)
[2013-08-08 20:36] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:36] [PACMAN] synchronizing package lists
[2013-08-08 20:36] [PACMAN] starting full system upgrade
[2013-08-08 20:37] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:37] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:37] [PACMAN] upgraded gstreamer (1.0.8-1 -> 1.0.9-1)
[2013-08-08 20:37] [PACMAN] upgraded gst-plugins-base-libs (1.0.8-1 -> 1.0.9-1)
[2013-08-08 20:37] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-5 -> 0.10.19-6)
[2013-08-08 20:37] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-5 -> 0.10.19-6)
[2013-08-08 20:38] [PACMAN] upgraded gtk (1.2.10-11 -> 1.2.10-12)
[2013-08-08 20:38] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:38] [PACMAN] synchronizing package lists
[2013-08-08 20:38] [PACMAN] starting full system upgrade
[2013-08-08 20:39] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:39] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:39] [PACMAN] upgraded harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-08 20:39] [PACMAN] upgraded harfbuzz-icu (0.9.18-1 -> 0.9.19-1)
[2013-08-08 20:39] [PACMAN] upgraded hplip (3.13.6-1 -> 3.13.7-1)
[2013-08-08 20:39] [PACMAN] upgraded ilmbase (2.0.0-1 -> 2.0.1-1)
[2013-08-08 20:39] [PACMAN] upgraded imake (1.0.5-1 -> 1.0.6-1)
[2013-08-08 20:39] [PACMAN] upgraded libpng (1.6.2-3 -> 1.6.3-1)
[2013-08-08 20:39] [PACMAN] upgraded imlib2 (1.4.5-4 -> 1.4.5-5)
[2013-08-08 20:39] [PACMAN] upgraded poppler-glib (0.22.5-1 -> 0.24.0-1)
[2013-08-08 20:39] [PACMAN] upgraded inkscape (0.48.4-8 -> 0.48.4-9)
[2013-08-08 20:39] [PACMAN] upgraded iproute2 (3.9.0-2 -> 3.10.0-1)
[2013-08-08 20:39] [PACMAN] upgraded iso-codes (3.43-1 -> 3.44-1)
[2013-08-08 20:39] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-08 20:39] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-08 20:39] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-08 20:39] [PACMAN] upgraded k3b (2.0.2-8 -> 2.0.2-9)
[2013-08-08 20:39] [PACMAN] upgraded openexr (2.0.0-1 -> 2.0.1-1)
[2013-08-08 20:39] [PACMAN] upgraded media-player-info (17-1 -> 19-1)
[2013-08-08 20:39] [PACMAN] upgraded kdelibs (4.10.5-1 -> 4.10.5-2)
[2013-08-08 20:39] [PACMAN] upgraded libdatrie (0.2.5-1 -> 0.2.6-1)
[2013-08-08 20:39] [PACMAN] upgraded libfm (1.1.0-5 -> 1.1.1-1)
[2013-08-08 20:39] [PACMAN] upgraded libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-08 20:39] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:39] [PACMAN] synchronizing package lists
[2013-08-08 20:39] [PACMAN] starting full system upgrade
[2013-08-08 20:40] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:40] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:40] [PACMAN] upgraded libgee (0.10.2-1 -> 0.10.3-1)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-common (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-base (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-calc (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-draw (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-gnome (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-impress (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-kde4 (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-math (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-postgresql-connector (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-sdk (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-sdk-doc (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libreoffice-writer (4.0.4-1 -> 4.0.4-2)
[2013-08-08 20:40] [PACMAN] upgraded libthai (0.1.18-1 -> 0.1.19-1)
[2013-08-08 20:40] [PACMAN] upgraded libusbx (1.0.15-1 -> 1.0.16-2)
[2013-08-08 20:40] [PACMAN] upgraded libvdpau (0.6-2 -> 0.7-1)
[2013-08-08 20:40] [PACMAN] upgraded libwbclient (4.0.7-3 -> 4.0.8-1)
[2013-08-08 20:40] [PACMAN] upgraded libwebp (0.3.1-2 -> 0.3.1-3)
[2013-08-08 20:40] [PACMAN] upgraded libwnck3 (3.4.5-1 -> 3.4.6-1)
[2013-08-08 20:40] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
[2013-08-08 20:41] [PACMAN] upgraded linux-firmware (20130610-1 -> 20130725-1)
[2013-08-08 20:41] [PACMAN] upgraded mkinitcpio-busybox (1.20.2-1 -> 1.21.1-2)
[2013-08-08 20:41] [PACMAN] upgraded util-linux (2.23.1-2 -> 2.23.2-1)
[2013-08-08 20:41] [PACMAN] upgraded mkinitcpio (0.14.0-1 -> 0.15.0-1)
[2013-08-08 20:41] [ALPM] warning: directory permissions differ on /boot/
filesystem: 777  package: 755
[2013-08-08 20:41] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-08-08 20:41] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Starting build: 3.10.5-1-ARCH
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Starting build: 3.10.5-1-ARCH
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2013-08-08 20:41] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-08-08 20:41] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-08 20:41] [PACMAN] upgraded linux (3.9.9-1 -> 3.10.5-1)
[2013-08-08 20:41] [PACMAN] upgraded linux-headers (3.9.9-1 -> 3.10.5-1)
[2013-08-08 20:41] [PACMAN] upgraded lirc-utils (1:0.9.0-49 -> 1:0.9.0-54)
[2013-08-08 20:41] [PACMAN] upgraded lxsession (0.4.6.1-3 -> 1:0.4.6.1-1)
[2013-08-08 20:41] [PACMAN] upgraded man-pages (3.52-1 -> 3.53-1)
[2013-08-08 20:41] [PACMAN] upgraded smbclient (4.0.7-3 -> 4.0.8-1)
[2013-08-08 20:41] [PACMAN] upgraded mencoder (36285-1 -> 36285-3)
[2013-08-08 20:41] [PACMAN] upgraded mesa (9.1.5-1 -> 9.1.6-1)
[2013-08-08 20:41] [PACMAN] upgraded mesa-libgl (9.1.5-1 -> 9.1.6-1)
[2013-08-08 20:41] [PACMAN] upgraded sox (14.4.1-2 -> 14.4.1-3)
[2013-08-08 20:41] [PACMAN] upgraded mlt (0.9.0-2 -> 0.9.0-3)
[2013-08-08 20:41] [PACMAN] upgraded mplayer (36285-1 -> 36285-3)
[2013-08-08 20:41] [PACMAN] upgraded nasm (2.10.07-1 -> 2.10.09-1)
[2013-08-08 20:41] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:41] [PACMAN] synchronizing package lists
[2013-08-08 20:41] [PACMAN] starting full system upgrade
[2013-08-08 20:42] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:42] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:42] [PACMAN] upgraded nepomuk-core (4.10.5-1 -> 4.10.5-2)
[2013-08-08 20:42] [PACMAN] upgraded netctl (1.1-1 -> 1.2-1)
[2013-08-08 20:42] [PACMAN] upgraded nouveau-dri (9.1.5-1 -> 9.1.6-1)
[2013-08-08 20:42] [PACMAN] upgraded ntp (4.2.6.p5-15 -> 4.2.6.p5-17)
[2013-08-08 20:42] [PACMAN] upgraded xine-lib (1.2.3-1 -> 1.2.3-2)
[2013-08-08 20:42] [PACMAN] upgraded opencv (2.4.6.1-1 -> 2.4.6.1-2)
[2013-08-08 20:42] [PACMAN] upgraded pcmanfm (1.1.0-1 -> 1.1.1-1)
[2013-08-08 20:42] [PACMAN] upgraded perl-common-sense (3.6-1 -> 3.72-1)
[2013-08-08 20:42] [PACMAN] upgraded perl-file-desktopentry (0.04-5 -> 0.05-1)
[2013-08-08 20:42] [PACMAN] upgraded pixman (0.30.0-1 -> 0.30.2-1)
[2013-08-08 20:42] [PACMAN] upgraded rosegarden (13.04-1 -> 13.06-1)
[2013-08-08 20:42] [PACMAN] upgraded samba (4.0.7-3 -> 4.0.8-1)
[2013-08-08 20:42] [PACMAN] upgraded subversion (1.8.0-1 -> 1.8.1-1)
[2013-08-08 20:42] [PACMAN] upgraded tcl (8.6.0-4 -> 8.6.0-5)
[2013-08-08 20:42] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-08 20:42] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-08 20:42] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-08 20:42] [ALPM-SCRIPTLET] recreating all formats...warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-08 20:42] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-08 20:42] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-08 20:42] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /texconfig/tcfmgr: No such file or directory
[2013-08-08 20:42] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-08 20:42] [ALPM-SCRIPTLET]  done.
[2013-08-08 20:42] [ALPM-SCRIPTLET]  (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-08 20:42] [PACMAN] upgraded texlive-bin (2012.0-13 -> 2013.30973-3)
[2013-08-08 20:42] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:42] [PACMAN] synchronizing package lists
[2013-08-08 20:42] [PACMAN] starting full system upgrade
[2013-08-08 20:44] [PACMAN] Running 'pacman -S thunderbird thunderbird-i18n-fr tk transcode videoproto virtuoso-base vlc webkitgtk wine xf86-video-nouveau xmms2 xorg-iceauth poppler poppler-qt4'
[2013-08-08 20:44] [PACMAN] upgraded thunderbird (17.0.7-1 -> 17.0.8-1)
[2013-08-08 20:44] [PACMAN] upgraded thunderbird-i18n-fr (17.0.7-1 -> 17.0.8-1)
[2013-08-08 20:44] [PACMAN] upgraded tk (8.6.0-1 -> 8.6.0-2)
[2013-08-08 20:44] [PACMAN] upgraded transcode (1.1.7-9 -> 1.1.7-10)
[2013-08-08 20:44] [PACMAN] upgraded videoproto (2.3.1-2 -> 2.3.2-1)
[2013-08-08 20:44] [PACMAN] upgraded virtuoso-base (6.1.6-2 -> 6.1.7-1)
[2013-08-08 20:44] [PACMAN] upgraded vlc (2.0.7-2 -> 2.0.8.a-1)
[2013-08-08 20:45] [PACMAN] upgraded webkitgtk (2.0.3-1 -> 2.0.4-1)
[2013-08-08 20:45] [PACMAN] upgraded wine (1.6-1 -> 1.7.0-1)
[2013-08-08 20:45] [PACMAN] upgraded xf86-video-nouveau (1.0.8-1 -> 1.0.9-1)
[2013-08-08 20:45] [PACMAN] upgraded xmms2 (0.8DrO_o-18 -> 0.8DrO_o-19)
[2013-08-08 20:45] [PACMAN] upgraded xorg-iceauth (1.0.5-1 -> 1.0.6-1)
[2013-08-08 20:45] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:45] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:45] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:45] [PACMAN] synchronizing package lists
[2013-08-08 20:45] [PACMAN] starting full system upgrade
[2013-08-08 20:46] [PACMAN] Running 'pacman -R texlive-core'
[2013-08-08 20:46] [PACMAN] Running 'pacman -R texlive-core lilypond'
[2013-08-08 20:46] [PACMAN] removed lilypond (2.16.2-3)
[2013-08-08 20:46] [PACMAN] Running 'pacman -R texlive-core'
[2013-08-08 20:46] [PACMAN] removed texlive-core (2012.29661-1)
[2013-08-08 20:46] [PACMAN] Running 'pacman -R lilypond'
[2013-08-08 20:47] [PACMAN] Running 'pacman -Syu poppler-qt4 poppler'
[2013-08-08 20:47] [PACMAN] synchronizing package lists
[2013-08-08 20:47] [PACMAN] starting full system upgrade
[2013-08-08 20:47] [PACMAN] reinstalled poppler (0.24.0-1)
[2013-08-08 20:47] [PACMAN] reinstalled poppler-qt4 (0.24.0-1)
[2013-08-08 20:47] [PACMAN] Running 'pacman -S lilypond texlive-core'
[2013-08-08 20:48] [PACMAN] Running 'pacman -S --force lilypond texlive-core'
[2013-08-08 20:48] [ALPM] warning: /etc/texmf/tex/generic/config/language.dat saved as /etc/texmf/tex/generic/config/language.dat.pacorig
[2013-08-08 20:48] [ALPM] warning: /etc/texmf/tex/generic/config/language.def saved as /etc/texmf/tex/generic/config/language.def.pacorig
[2013-08-08 20:48] [ALPM] warning: /etc/texmf/dvipdfmx/dvipdfmx.cfg saved as /etc/texmf/dvipdfmx/dvipdfmx.cfg.pacorig
[2013-08-08 20:48] [ALPM] warning: /etc/texmf/chktex/chktexrc saved as /etc/texmf/chktex/chktexrc.pacorig
[2013-08-08 20:48] [ALPM] warning: /etc/texmf/web2c/fmtutil.cnf saved as /etc/texmf/web2c/fmtutil.cnf.pacorig
[2013-08-08 20:48] [ALPM] warning: /etc/texmf/web2c/texmf.cnf saved as /etc/texmf/web2c/texmf.cnf.pacorig
[2013-08-08 20:48] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.0LwBsOOcvm...
[2013-08-08 20:48] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-08-08 20:48] [ALPM-SCRIPTLET]              into /etc/texmf/web2c/updmap-local.cfg
[2013-08-08 20:48] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-08 20:48] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2013-08-08 20:48] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R... 
[2013-08-08 20:48] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2013-08-08 20:48] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2013-08-08 20:48] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-08 20:48] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-08-08 20:48] [ALPM-SCRIPTLET]  done.
[2013-08-08 20:48] [ALPM-SCRIPTLET] creating all formats... done.
[2013-08-08 20:48] [ALPM-SCRIPTLET]  (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-08 20:48] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
[2013-08-08 20:48] [ALPM-SCRIPTLET]     see http://wiki.archlinux.org/index.php/TeX_Live
[2013-08-08 20:48] [PACMAN] installed texlive-core (2013.30962-2)
[2013-08-08 20:50] [PACMAN] installed lilypond (2.16.2-3)
[2013-08-08 20:50] [PACMAN] Running 'pacman -S lilypond'
[2013-08-08 20:53] [PACMAN] reinstalled lilypond (2.16.2-3)
[2013-08-08 20:53] [PACMAN] Running 'pacman -Syu'
[2013-08-08 20:53] [PACMAN] synchronizing package lists
[2013-08-08 20:53] [PACMAN] starting full system upgrade
[2013-08-08 20:53] [PACMAN] Running 'pacman -S glib'
[2013-08-08 20:53] [PACMAN] reinstalled glib (1.2.10-10)

Et les mirroirs que j'utilise, tirés du fichier /etc/pacman.conf :

Code : Tout sélectionner

[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist

[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist

#[community-testing]
#Include = /etc/pacman.d/mirrorlist

[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist

# France
Server = http://archlinux.polymorf.fr/$repo/os/$arch

benjarobin a écrit :
Je ne suis pas sûr de comprendre ce que tu veux dire par bloqué ? Un screenshot ?
Pas de screenshot. Mais il ne servirait à rien. Sache que les MAJ s'arrête net après le remplacement d'un paquet. Et le terminal reste bloqué sur le dernier paquet mis à jour. Sont donc en rade tous ceux qui n'ont pas été mis à jour. Je dois alors faire un control + c pour stopper pacman et le relancer, afin que les autres paquets soient, à leur tour, mis à jour.

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 21:40

par onyx67

Dans un autre poste tu indiques avoir ré-installé un paquet avec l'option --force.
Ne jamais utiliser cette option, tu risques à coup sûr de casser ton système.
Ton soucis est suite à cette manip?

EDIT: il y avait une new concernant TeXLive: http://archlinux.fr/news/la-mise-a-jour ... n-manuelle

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 21:46

par bpier

Oui, mon souci est bien antérieur à cette manip. ce n'est toutefois pas le premier problème que j'ai eu avec pacman, il y en a eu d'autres : http://forums.archlinux.fr/topic13679.html

EDIT : si, par le passé, j'ai utilisé une fois l'option --force, sur la base d'une suggestion prudente donnée sur le forum, ici http://forums.archlinux.fr/topic13639.html

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 21:56

par onyx67

Je faisais allusion au problème d'installation texlive que tu as eu: http://forums.archlinux.fr/post120461.html#p120461

Mais si le problème est antérieur ce n'est pas lié.

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : jeu. 08 août 2013, 22:25

par bpier

C'est vrai qu'en quelques mois d'Arch, j'en ai eu quand même quelques uns, des problèmes d'install

Enfin, tout réfléchi, ça reste raisonnable.

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 09:00

par FoolEcho

bpier a écrit :Et les mirroirs que j'utilise, tirés du fichier /etc/pacman.conf :
Code : Tout sélectionner
(...)

# France
Server = http://archlinux.polymorf.fr/$repo/os/$arch

Ça sort du mirrorlist, pas du pacman.conf, on est d'accord ?

Sinon, ton log de pacman ne nous donne pas d'indications.

Je te suggère de lancer pacman -Syu --debug et si ça bloque de nous poster la sortie (sans relancer pacman bien sûr), on y verra peut-être plus clair.

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 10:01

par bpier

Pour FoolEcho :
=> le "Server = http://archlinux.polymorf.fr/$repo/os/$arch" est dans le /etc/pacman.conf, pas dans le mirrorlist.

=> Je n'arrive pas à obtenir la totalité du résultat de la commande en console (résultat trop long), donc je donne celui d'un # pacman -Syu --debug >> /home/bpier/debug_pacman.txt:

Code : Tout sélectionner

:: Synchronizing package databases...
 core is up to date
 extra is up to date
 community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...

Packages (1): xorg-xprop-1.2.2-1

Total Download Size:    0.02 MiB
Total Installed Size:   0.04 MiB
Net Upgrade Size:       0.00 MiB

Voilà une partie (la fin) de ce que donne en root (#) pacman -Syu --debug, après que debug vérifia s'il faut remplacer une bonne centaine de paquets tels que libxcursor, libxdamage... :

Code : Tout sélectionner

...resolving dependencies...
debug: resolving target's dependencies
debug: started resolving dependencies
debug: checkdeps: package xorg-xprop-1.2.2-1
debug: finished resolving dependencies
debug: started sorting dependencies
debug: sorting dependencies finished
looking for inter-conflicts...
debug: looking for conflicts
debug: check targets vs targets
debug: check targets vs targets
debug: check targets vs db and db vs targets
debug: check targets vs db
debug: check db vs targets
debug: checking dependencies
debug: checkdeps: package xorg-xprop-1.2.2-1
debug: setting download size 21912 for pkg xorg-xprop

Packages (1): xorg-xprop-1.2.2-1

Total Download Size:    0.02 MiB
Total Installed Size:   0.04 MiB
Net Upgrade Size:       0.00 MiB

 :: Proceed with installation? [Y/n] y
debug: using cachedir: /var/cache/pacman/pkg/
debug: checking available disk space for download
debug: discovered mountpoint: /tmp
debug: discovered mountpoint: /sys/kernel/debug
debug: discovered mountpoint: /sys/fs/fuse/connections
debug: discovered mountpoint: /sys/fs/cgroup/systemd
debug: discovered mountpoint: /sys/fs/cgroup/freezer
debug: discovered mountpoint: /sys/fs/cgroup/cpuset
debug: discovered mountpoint: /sys/fs/cgroup/cpu,cpuacct
debug: discovered mountpoint: /sys/fs/cgroup
debug: discovered mountpoint: /sys
debug: discovered mountpoint: /run/user/1000/gvfs
debug: discovered mountpoint: /run
debug: discovered mountpoint: /proc/sys/fs/binfmt_misc
debug: discovered mountpoint: /proc
debug: discovered mountpoint: /mnt/stockage_ext4
debug: discovered mountpoint: /mnt/gentoo_sys
debug: discovered mountpoint: /mnt/gentoo_home
debug: discovered mountpoint: /mnt/debian_home
debug: discovered mountpoint: /home
debug: discovered mountpoint: /dev/shm
debug: discovered mountpoint: /dev/pts
debug: discovered mountpoint: /dev/mqueue
debug: discovered mountpoint: /dev/hugepages
debug: discovered mountpoint: /dev
debug: discovered mountpoint: /boot
debug: discovered mountpoint: /
debug: discovered mountpoint: /
debug: loading fsinfo for /
debug: partition /, needed 6, cushion 5121, free 27708103
debug: url: http://mirror.us.leaseweb.net/archlinux/extra/os/i686/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: maxsize: 21912
debug: opened tempfile for download: /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz.part (wb)
debug: curl returned error 0 from transfer
debug: response code: 200
debug: using cachedir: /var/cache/pacman/pkg/
debug: GPGME version: 1.4.2
debug: GPGME engine info: file=/usr/bin/gpg, home=/etc/pacman.d/gnupg/
debug: looking up key 06096A6AD1CEDDAC locally
debug: key lookup success, key exists
debug: found cached pkg: /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJSBHxDAAoJEAYJamrRzt2sliYH/2XM/bewQTiR1QRVhqs1Qmp3/RdbLnJMHHkpYwANTauaLDDfT36Oi/PDDHyYJ9qA/E8PDoETfqQS9VLrYxU9GB1c5LR2GV61w01uSXJMDiGIQiamZ44vrQ34SUROa6ffPubnhAPnfKRJx2UoyZmyq69H+vN93qhmTSU68xo7QWMAurmYLPk6jcxlHLqAQwWuB/Z8TfBSFprSZvXeS/AZysNG4yC092vxKuc3mzyDRtm17GrlZlmdJwY5Lr5+L3cEVjlS9CDGYht/mNOQZJzW2BUyPC4rlXomGBjDt2xSCMHaaMLD7tIs/GhsApcWXNm9ZrhZNCtmef/zEvEr5yNv8hU=
debug: checking signature for /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1376025667
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <lordheavym@gmail.com>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: replacing pkgcache entry with package file for target xorg-xprop
debug: opening archive /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: starting package load for /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: xorg-xprop: unknown key 'makedepend' in description file line 16
debug: sorting package filelist for /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: looking for file conflicts
debug: searching for file conflicts: xorg-xprop
debug: searching for filesystem conflicts: xorg-xprop
debug: checking available disk space
debug: discovered mountpoint: /tmp
debug: discovered mountpoint: /sys/kernel/debug
debug: discovered mountpoint: /sys/fs/fuse/connections
debug: discovered mountpoint: /sys/fs/cgroup/systemd
debug: discovered mountpoint: /sys/fs/cgroup/freezer
debug: discovered mountpoint: /sys/fs/cgroup/cpuset
debug: discovered mountpoint: /sys/fs/cgroup/cpu,cpuacct
debug: discovered mountpoint: /sys/fs/cgroup
debug: discovered mountpoint: /sys
debug: discovered mountpoint: /run/user/1000/gvfs
debug: discovered mountpoint: /run
debug: discovered mountpoint: /proc/sys/fs/binfmt_misc
debug: discovered mountpoint: /proc
debug: discovered mountpoint: /mnt/stockage_ext4
debug: discovered mountpoint: /mnt/gentoo_sys
debug: discovered mountpoint: /mnt/gentoo_home
debug: discovered mountpoint: /mnt/debian_home
debug: discovered mountpoint: /home
debug: discovered mountpoint: /dev/shm
debug: discovered mountpoint: /dev/pts
debug: discovered mountpoint: /dev/mqueue
debug: discovered mountpoint: /dev/hugepages
debug: discovered mountpoint: /dev
debug: discovered mountpoint: /boot
debug: discovered mountpoint: /
debug: discovered mountpoint: /
debug: loading fsinfo for /
debug: partition /, needed 0, cushion 5121, free 27708096
debug: installing packages
debug: upgrading package xorg-xprop-1.2.2-1
debug: removing old package first (xorg-xprop-1.2.1-1)
debug: failed to stat directory usr/: No such file or directory
debug: failed to stat directory usr/bin/: No such file or directory
debug: failed to stat directory usr/share/: No such file or directory
debug: failed to stat directory usr/share/licenses/: No such file or directory
debug: failed to stat directory usr/share/licenses/xorg-xprop/: No such file or directory
debug: failed to stat directory usr/share/man/: No such file or directory
debug: failed to stat directory usr/share/man/man1/: No such file or directory
debug: removing 10 files
debug: unlinking /usr/share/man/man1/xprop.1.gz
debug: keeping directory /usr/share/man/man1/ (contains files)
debug: keeping directory /usr/share/man/ (contains files)
debug: unlinking /usr/share/licenses/xorg-xprop/COPYING
debug: keeping directory /usr/share/licenses/xorg-xprop/ (in new package)
debug: keeping directory /usr/share/licenses/ (contains files)
debug: keeping directory /usr/share/ (contains files)
debug: unlinking /usr/bin/xprop
debug: keeping directory /usr/bin/ (contains files)
debug: keeping directory /usr/ (contains files)
debug: removing database entry 'xorg-xprop'
debug: removing entry 'xorg-xprop' from 'local' cache
debug: extracting files
debug: opening archive /var/cache/pacman/pkg/xorg-xprop-1.2.2-1-i686.pkg.tar.xz
debug: skipping extraction of '.PKGINFO'
debug: extracting /var/lib/pacman/local/xorg-xprop-1.2.2-1/mtree
debug: extract: skipping dir extraction of /usr/
debug: extract: skipping dir extraction of /usr/share/
debug: extract: skipping dir extraction of /usr/bin/
debug: extracting /usr/bin/xprop
debug: extract: skipping dir extraction of /usr/share/man/
debug: extract: skipping dir extraction of /usr/share/licenses/
debug: extract: skipping dir extraction of /usr/share/licenses/xorg-xprop/
debug: extracting /usr/share/licenses/xorg-xprop/COPYING
debug: extract: skipping dir extraction of /usr/share/man/man1/
debug: extracting /usr/share/man/man1/xprop.1.gz
debug: updating database
debug: adding database entry 'xorg-xprop'
debug: writing xorg-xprop-1.2.2-1 DESC information back to db
debug: writing xorg-xprop-1.2.2-1 FILES information back to db
debug: adding entry 'xorg-xprop' in 'local' cache
debug: running ldconfig
debug: executing "/usr/bin/ldconfig" under chroot "/"
debug: call to waitpid succeeded
debug: unregistering database 'local'
debug: freeing package cache for repository 'local'
debug: unregistering database 'core'
debug: freeing package cache for repository 'core'
debug: unregistering database 'extra'
debug: freeing package cache for repository 'extra'
debug: unregistering database 'community'
debug: freeing package cache for repository 'community'
[root@bpier bpier]#

EDIT : pour donner le log complet, je viens de découvrir qu'on pouvait utiliser sprunge, de cette manière :

Code : Tout sélectionner

pacman -Syu --debug |& tee pacman.log
curl -F 'sprunge=<-' http://sprunge.us < pacman.log

Pour info, j'ai depuis le dernier log mis à jour le paquet xorg-xprop. Donc, voici le résultat d'un pacman -Syu --debug sur ma machine mise à jour, via sprunge : http://sprunge.us/ALfI

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 10:28

par tuxce

bpier a écrit :
Code : Tout sélectionner
debug: failed to stat directory usr/: No such file or directory

Je sais pas comment tu as résolu la migration des *bin, mais t'as du faire une erreur dans le lot

Pour info, ne pas avoir 50 miroirs aide à avoir des logs plus petits

bpier a écrit :EDIT : pour donner le log complet, je viens de découvrir qu'on pouvait utiliser sprunge, de cette manière :

pacman -Syu --debug |& tee pacman.log
curl -F 'sprunge=<-' http://sprunge.us < pacman.log

En espérant que tu n'étais dans le dossier /var/log

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 10:36

par bpier

Le nombre de mirroirs, ça, ça se réduit aisément. En revanche, pour la migration des *.bin, c'est une autre histoire. J'espère que je ne devrais pas réinstaller Arch...

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 10:47

par oktoberfest

Et que donne un

Code : Tout sélectionner

$ ls -ld /bin /usr /sbin /usr/bin /usr/sbin

Normalement ça devrait donner ça :

Code : Tout sélectionner

$ ls -ld /bin /usr /sbin /usr/bin /usr/sbin
lrwxrwxrwx 1 root root     7 31 mai   20:40 /bin -> usr/bin
lrwxrwxrwx 1 root root     7 31 mai   20:40 /sbin -> usr/bin
drwxr-xr-x 8 root root  4096  3 juin  14:08 /usr
drwxr-xr-x 5 root root 69632  8 août  09:22 /usr/bin
lrwxrwxrwx 1 root root     3 31 mai   20:40 /usr/sbin -> bin

Bien sur les dates peuvent différer.

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 10:51

par tuxce

Autant pour moi (et j'entraîne avec moi les autres

), le 'failed to stat' est normal pour la suppression d'un paquet. (c'est parce que les dossiers qu'il essaie de vérifier sont en relatif)
Mais du coup, je suppose que la commande dont provient le log s'est bien déroulée ? Parce que si oui, en fait, on aura pas d'indications sur l'erreur.

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 10:56

par bpier

Pour oktoberfest :

Code : Tout sélectionner

[bpier@bpier ~]$  ls -ld /bin /usr /sbin /usr/bin /usr/sbin
lrwxrwxrwx  1 root root      7 May 31 20:40 /bin -> usr/bin
lrwxrwxrwx  1 root root      7 May 31 20:40 /sbin -> usr/bin
drwxr-xr-x 10 root root   4096 Aug  8 20:42 /usr
drwxr-xr-x  6 root root 102400 Aug  9 10:28 /usr/bin
lrwxrwxrwx  1 root root      3 May 31 20:40 /usr/sbin -> bin
[bpier@bpier ~]$

Rigolo : les dates diffèrent, mais pas de beaucoup. Et puis, je me rends compte que ma console est en english.

Pour tuxce :
Oui, la commande s'est bien déroulée.

EDIT : je viens de passer ma console en français.

Code : Tout sélectionner

[bpier@bpier ~]$  ls -ld /bin /usr /sbin /usr/bin /usr/sbin
lrwxrwxrwx  1 root root      7 31 mai   20:40 /bin -> usr/bin
lrwxrwxrwx  1 root root      7 31 mai   20:40 /sbin -> usr/bin
drwxr-xr-x 10 root root   4096  8 août  20:42 /usr
drwxr-xr-x  6 root root 102400  9 août  10:28 /usr/bin
lrwxrwxrwx  1 root root      3 31 mai   20:40 /usr/sbin -> bin
[bpier@bpier ~]$

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 11:23

par oktoberfest

bpier a écrit :Pour FoolEcho :
=> le "Server = http://archlinux.polymorf.fr/$repo/os/$arch" est dans le /etc/pacman.conf, pas dans le mirrorlist.

Pas bien

... Les miroirs sont à spécifier uniquement dans /etc/pacman.d/mirrorlist.

Que donne un :

Code : Tout sélectionner

$ egrep -v '^#|^$' /etc/pacman.d/mirrorlist

Si tu décommentes uniquement ton miroir tu devrais avoir comme réponse :

Code : Tout sélectionner

$ egrep -v '^#|^$' /etc/pacman.d/mirrorlist
Server = http://archlinux.polymorf.fr/$repo/os/$arch

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 11:30

par bpier

Le résultat d'un $ egrep -v '^#|^$' /etc/pacman.d/mirrorlist :

Code : Tout sélectionner

Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
Server = http://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
Server = http://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
Server = http://archlinux.polymorf.fr/$repo/os/$arch
Server = http://hive.ist.unomaha.edu/archlinux/$repo/os/$arch
Server = http://ftp.tuxdroid.org/archlinux/$repo/os/$arch
Server = http://ftp.byfly.by/pub/archlinux/$repo/os/$arch
Server = http://lug.mtu.edu/archlinux/$repo/os/$arch
Server = http://archlinux.limun.org/$repo/os/$arch
Server = http://mir.archlinux.fr/$repo/os/$arch
Server = http://mirror.rit.edu/archlinux/$repo/os/$arch
Server = http://mirror.datacenter.by/pub/archlinux/$repo/os/$arch
Server = http://archlinux.openlabto.org/archlinux/$repo/os/$arch
Server = http://archlinux.mirrors.uk2.net/$repo/os/$arch
Server = http://mirror.bytemark.co.uk/archlinux/$repo/os/$arch
Server = http://foss.aueb.gr/mirrors/linux/archlinux/$repo/os/$arch
Server = http://mirror.1favre.de/$repo/os/$arch
Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://arch.apt-get.eu/$repo/os/$arch
Server = http://archlinux.surlyjake.com/archlinux/$repo/os/$arch
Server = http://mirror.unitedcolo.de/archlinux/$repo/os/$arch
Server = http://mirrors.liquidweb.com/archlinux/$repo/os/$arch
Server = http://mirror.darkorb.me/archlinux/$repo/os/$arch
Server = http://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch
Server = http://mirror.chmuri.net/archmirror/$repo/os/$arch
Server = http://miroir.ezvan.fr/archlinux/$repo/os/$arch
Server = http://mirror1.htu.tugraz.at/archlinux/$repo/os/$arch
Server = http://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch
Server = http://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch
Server = http://ftp.vectranet.pl/archlinux/$repo/os/$arch
Server = http://archlinux.mirror.dkm.cz/pub/archlinux/$repo/os/$arch
Server = http://mirror.archlinux.no/$repo/os/$arch
Server = http://ftp.snt.utwente.nl/pub/os/linux/archlinux/$repo/os/$arch
Server = http://mirror.vpsfree.cz/archlinux/$repo/os/$arch
Server = http://archlinux.mirror.kangaroot.net/$repo/os/$arch
Server = http://fruk.org/archlinux/$repo/os/$arch
Server = http://mirror.michael-eckert.net/archlinux/$repo/os/$arch
Server = http://mirror.yandex.ru/archlinux/$repo/os/$arch
Server = http://www.las.ic.unicamp.br/pub/archlinux/$repo/os/$arch
Server = http://archlinux.puzzle.ch/$repo/os/$arch
Server = http://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch
Server = http://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch
Server = http://pet.inf.ufsc.br/mirrors/archlinux/$repo/os/$arch
Server = http://cake.lib.fit.edu/archlinux/$repo/os/$arch
Server = http://mirror.fluxent.de/archlinux/$repo/os/$arch
Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
Server = http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch
Server = http://mirror.selfnet.de/archlinux/$repo/os/$arch
Server = http://mirror.umd.edu/archlinux/$repo/os/$arch
Server = http://www.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch
Server = http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
Server = http://mirror.netcologne.de/archlinux/$repo/os/$arch
Server = http://mirrors.cat.pdx.edu/archlinux/$repo/os/$arch
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
Server = http://arch.linux.net.mk/archlinux/$repo/os/$arch
Server = http://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
Server = http://mirrors.dotsrc.org/archlinux/$repo/os/$arch
Server = http://mirror.archlinux.fi/archlinux/$repo/os/$arch
Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch
Server = http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch
Server = http://archlinux.mirror.rafal.ca/$repo/os/$arch
Server = http://ftp.neutrinopower.de/archlinux/$repo/os/$arch
Server = http://archlinux.mirror.root.lu/$repo/os/$arch
Server = http://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch
Server = http://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch
Server = http://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
Server = http://mirrors.ustc.edu.cn/archlinux/$repo/os/$arch
Server = http://ftp.swin.edu.au/archlinux/$repo/os/$arch
Server = http://mirror.cinosure.com/archlinux/$repo/os/$arch
Server = http://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch
Server = http://mirrors.prometeus.net/archlinux/$repo/os/$arch
Server = http://mirror.pmf.kg.ac.rs/archlinux/$repo/os/$arch
Server = http://ftp.wa.co.za/pub/archlinux/$repo/os/$arch
Server = http://mirror.academica.fi/archlinux/$repo/os/$arch
Server = http://archlinux.uib.no/$repo/os/$arch
Server = http://mirrors6.ustc.edu.cn/archlinux/$repo/os/$arch
Server = http://mirror.nexcess.net/archlinux/$repo/os/$arch
Server = http://www.laqee.unal.edu.co/archlinux/$repo/os/$arch
Server = http://ftp.eenet.ee/pub/archlinux/$repo/os/$arch
Server = http://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch
Server = http://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch
Server = http://mirror.i3d.net/pub/archlinux/$repo/os/$arch
Server = http://mirrors.rutgers.edu/archlinux/$repo/os/$arch
Server = http://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch
Server = http://ftp.tsukuba.wide.ad.jp/Linux/archlinux/$repo/os/$arch
Server = http://linux.rz.rub.de/archlinux/$repo/os/$arch
Server = http://cosmos.cites.illinois.edu/pub/archlinux/$repo/os/$arch
Server = http://mirror.rol.ru/archlinux/$repo/os/$arch
Server = http://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch
Server = http://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
Server = http://archlinux.nautile.nc/archlinux/$repo/os/$arch
Server = http://mirror.bjtu.edu.cn/archlinux/$repo/os/$arch
Server = http://mirror6.bjtu.edu.cn/archlinux/$repo/os/$arch
Server = http://mirrors.neusoft.edu.cn/archlinux/$repo/os/$arch
Server = http://ftp.df.lth.se/pub/archlinux/$repo/os/$arch
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/$arch
Server = http://mirror.archlinux.ro/archlinux/$repo/os/$arch
Server = http://ftp.otenet.gr/linux/archlinux/$repo/os/$arch
Server = http://mirror.archlinux.ikoula.com/archlinux/$repo/os/$arch
Server = http://archlinux.goodsoft.lv/$repo/os/$arch
Server = http://archlinux.kz/$repo/os/$arch
Server = http://mirrors.lax1.thegcloud.com/arch/$repo/os/$arch
Server = http://mirrors.stuhome.net/archlinux/$repo/os/$arch
Server = http://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch
Server = http://mirror.xnet.co.nz/pub/archlinux/$repo/os/$arch
Server = http://mirror.nus.edu.sg/archlinux/$repo/os/$arch
Server = http://archlinux.igor.onlinedirect.bg/$repo/os/$arch
Server = http://mirror.optus.net/archlinux/$repo/os/$arch
Server = http://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch
Server = http://mirror.metrocast.net/archlinux/$repo/os/$arch
Server = http://ftp.availo.se/archlinux/$repo/os/$arch
Server = http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
Server = http://mirrors.163.com/archlinux/$repo/os/$arch
Server = http://mirrors.gigenet.com/archlinux/$repo/os/$arch
Server = http://mirror.neolabs.kz/archlinux/$repo/os/$arch
Server = http://mirror.internode.on.net/pub/archlinux/$repo/os/$arch
Server = http://mirror.its.dal.ca/archlinux/$repo/os/$arch
Server = http://mirrors.tuna.tsinghua.edu.cn/archlinux/$repo/os/$arch
Server = http://sunsite.rediris.es/mirror/archlinux/$repo/os/$arch
Server = http://mirrors.xmission.com/archlinux/$repo/os/$arch
Server = http://archlinux.cs.nctu.edu.tw/$repo/os/$arch
Server = http://ftp.linux.org.tr/archlinux/$repo/os/$arch
Server = http://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch
Server = http://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch
Server = http://artfiles.org/archlinux.org/$repo/os/$arch
Server = http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch
Server = http://mirrors.st.uz/archlinux/$repo/os/$arch
Server = http://osl.ugr.es/archlinux/$repo/os/$arch
Server = http://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
Server = http://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch
Server = http://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch
Server = http://archlinux.mirror.vexxhost.com/$repo/os/$arch
Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
Server = http://mirror.lnx.sk/pub/linux/archlinux/$repo/os/$arch
Server = http://ftp.kaist.ac.kr/ArchLinux/$repo/os/$arch
Server = http://mirror.learn.ac.lk/archlinux/$repo/os/$arch
Server = http://ftp.uni-bayreuth.de/linux/archlinux/$repo/os/$arch
Server = http://mirror-fpt-telecom.fpt.net/archlinux/$repo/os/$arch
Server = http://archlinux.supsec.org/$repo/os/$arch
Server = http://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch
Server = http://mirror.archlinux.cl/$repo/os/$arch

Comme rien n'est commenté, polymorph y apparaît bien à la 4e ligne. De plus, dans mon pacman.conf, j'ai viré ce matin la ligne qui le concernait.

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 11:37

par oktoberfest

Donc :
tu commentes TOUS tes miroirs sauf celui que tu veux utiliser.

Question subsidiaire : pourquoi as-tu décommenté tous les miroirs ? Quel est l'intérêt d'en utiliser 142 :corde:

Re: [Pacman] Les MAJ s'arrêtent en cours de route

Publié : ven. 09 août 2013, 11:41

par benjarobin

C'est plus simple de faire ceci :

Code : Tout sélectionner

pacman -S pacman-mirrorlist
echo 'Server = http://archlinux.polymorf.fr/$repo/os/$arch' > /etc/pacman.d/mirrorlist
echo "" >> /etc/pacman.d/mirrorlist
cat /etc/pacman.d/mirrorlist.pacnew >> /etc/pacman.d/mirrorlist

Et comme j'ai des doutes aussi sur ton pacman.conf et que tu n'as aucun dépôt "particulier"

Code : Tout sélectionner

pacman -S pacman
mv /etc/pacman.conf /etc/pacman.conf.pacsave
mv /etc/pacman.conf.pacnew /etc/pacman.conf

Une fois ceci fait peut tu donner la sortie de

Code : Tout sélectionner

pacman -Qqk