[xorg] impossible de faire démarrer gnome

>)))°> · Message par **>)))°>** » sam. 26 oct. 2013, 16:37

bonjour,

j'essaye de mettre en place une interface graphique pour un PC.
Je ne dispose que d'un compte root dessus pour le moment.
J'ai installé entre autres xorg-server, xorg-server-utils, xorg-xinit.
J'ai installé les paquets gnome et ai mis "exec gnome-session" dans .xinitrc.

lorsque je lance "startx", tout ce que j'ai est un écran noir. Le serveur xorg
a l'air de rencontrer des erreurs mais je n'arrive pas à comprendre lesquelles.
L'erreur concernant AIGLX est mentionnée dans le wiki archlinux anglais (https://wiki.archlinux.org/index.php/Xorg)
la solution donnée alors est

Make some free space on your root partition and X will start

pourtant je sais que j'ai de la place sur ma partition root (mais mon /dev/fstab est vide, ça a peut être à voir avec le problème)

j'ai peut-être loupé quelque chose dans le procédure d'installation (je suis obligé de rebooter sous
windows à chaque fois pour pouvoir lire les instructions sur le wiki)...

j'ai déjà désinstallé completement xorg et gnome avec pacman -Rcsn pour les réinstaller ensuite pour
être sûr de recommencer sur quelque chose de propre mais rien n'y fait, je n'arrive toujours pas à
faire démarrer une session gnome.

quelqu'un pourrait-il me donner une procédure permettant de supprimer COMPLETEMENT xorg et gnome
(ou au moins être sûr qu'il n'aura pas de fichiers résiduels) pour ensuite réinstaller xorg
correctement et disposer d'un environement graphique même minimal?

au besoin, voici mon log xorg ;

Code : Tout sélectionner

[  2929.589] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[  2929.592] X Protocol Version 11, Revision 0
[  2929.593] Build Operating System: Linux 3.11.1-1-ARCH x86_64 
[  2929.594] Current Operating System: Linux localhost 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[  2929.594] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda5 rw initrd=../initramfs-linux.img
[  2929.596] Build Date: 08 October 2013  08:48:10PM
[  2929.597]  
[  2929.597] Current version of pixman: 0.30.2
[  2929.598] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2929.598] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2929.601] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 26 15:57:13 2013
[  2929.602] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2929.602] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2929.602] (==) No Layout section.  Using the first Screen section.
[  2929.602] (==) No screen section available. Using defaults.
[  2929.602] (**) |-->Screen "Default Screen Section" (0)
[  2929.602] (**) |   |-->Monitor "<default monitor>"
[  2929.602] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2929.602] (==) Automatically adding devices
[  2929.602] (==) Automatically enabling devices
[  2929.602] (==) Automatically adding GPU devices
[  2929.602] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  2929.603] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2929.603] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2929.603] (II) Loader magic: 0x7fdc20
[  2929.603] (II) Module ABI versions:
[  2929.603] 	X.Org ANSI C Emulation: 0.4
[  2929.603] 	X.Org Video Driver: 14.1
[  2929.603] 	X.Org XInput driver : 19.1
[  2929.603] 	X.Org Server Extension : 7.0
[  2929.603] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2929.604] (--) PCI:*(0:1:0:0) 1002:68e4:1043:1c92 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[  2929.605] Initializing built-in extension Generic Event Extension
[  2929.605] Initializing built-in extension SHAPE
[  2929.606] Initializing built-in extension MIT-SHM
[  2929.607] Initializing built-in extension XInputExtension
[  2929.607] Initializing built-in extension XTEST
[  2929.608] Initializing built-in extension BIG-REQUESTS
[  2929.609] Initializing built-in extension SYNC
[  2929.609] Initializing built-in extension XKEYBOARD
[  2929.610] Initializing built-in extension XC-MISC
[  2929.611] Initializing built-in extension SECURITY
[  2929.611] Initializing built-in extension XINERAMA
[  2929.612] Initializing built-in extension XFIXES
[  2929.613] Initializing built-in extension RENDER
[  2929.613] Initializing built-in extension RANDR
[  2929.614] Initializing built-in extension COMPOSITE
[  2929.615] Initializing built-in extension DAMAGE
[  2929.616] Initializing built-in extension MIT-SCREEN-SAVER
[  2929.616] Initializing built-in extension DOUBLE-BUFFER
[  2929.617] Initializing built-in extension RECORD
[  2929.618] Initializing built-in extension DPMS
[  2929.618] Initializing built-in extension X-Resource
[  2929.619] Initializing built-in extension XVideo
[  2929.620] Initializing built-in extension XVideo-MotionCompensation
[  2929.621] Initializing built-in extension XFree86-VidModeExtension
[  2929.621] Initializing built-in extension XFree86-DGA
[  2929.622] Initializing built-in extension XFree86-DRI
[  2929.623] Initializing built-in extension DRI2
[  2929.623] (II) "glx" will be loaded by default.
[  2929.623] (II) LoadModule: "dri2"
[  2929.623] (II) Module "dri2" already built-in
[  2929.623] (II) LoadModule: "glamoregl"
[  2929.623] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  2929.624] (II) Module glamoregl: vendor="X.Org Foundation"
[  2929.624] 	compiled for 1.14.2, module version = 0.5.1
[  2929.624] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2929.624] (II) LoadModule: "glx"
[  2929.625] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2929.625] (II) Module glx: vendor="X.Org Foundation"
[  2929.625] 	compiled for 1.14.3, module version = 1.0.0
[  2929.625] 	ABI class: X.Org Server Extension, version 7.0
[  2929.625] (==) AIGLX enabled
[  2929.625] Loading extension GLX
[  2929.625] (==) Matched ati as autoconfigured driver 0
[  2929.626] (==) Matched ati as autoconfigured driver 1
[  2929.626] (==) Matched vesa as autoconfigured driver 2
[  2929.626] (==) Matched modesetting as autoconfigured driver 3
[  2929.626] (==) Matched fbdev as autoconfigured driver 4
[  2929.626] (==) Assigned the driver to the xf86ConfigLayout
[  2929.626] (II) LoadModule: "ati"
[  2929.626] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[  2929.626] (II) Module ati: vendor="X.Org Foundation"
[  2929.626] 	compiled for 1.14.2, module version = 7.2.0
[  2929.626] 	Module class: X.Org Video Driver
[  2929.626] 	ABI class: X.Org Video Driver, version 14.1
[  2929.626] (II) LoadModule: "radeon"
[  2929.626] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[  2929.626] (II) Module radeon: vendor="X.Org Foundation"
[  2929.626] 	compiled for 1.14.2, module version = 7.2.0
[  2929.626] 	Module class: X.Org Video Driver
[  2929.626] 	ABI class: X.Org Video Driver, version 14.1
[  2929.626] (II) LoadModule: "vesa"
[  2929.626] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  2929.626] (II) Module vesa: vendor="X.Org Foundation"
[  2929.626] 	compiled for 1.14.0, module version = 2.3.2
[  2929.626] 	Module class: X.Org Video Driver
[  2929.626] 	ABI class: X.Org Video Driver, version 14.1
[  2929.626] (II) LoadModule: "modesetting"
[  2929.627] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2929.627] (II) Module modesetting: vendor="X.Org Foundation"
[  2929.627] 	compiled for 1.14.1, module version = 0.8.0
[  2929.627] 	Module class: X.Org Video Driver
[  2929.627] 	ABI class: X.Org Video Driver, version 14.1
[  2929.627] (II) LoadModule: "fbdev"
[  2929.627] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  2929.627] (II) Module fbdev: vendor="X.Org Foundation"
[  2929.627] 	compiled for 1.14.3, module version = 0.4.4
[  2929.627] 	Module class: X.Org Video Driver
[  2929.627] 	ABI class: X.Org Video Driver, version 14.1
[  2929.627] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
	HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI
[  2929.629] (II) VESA: driver for VESA chipsets: vesa
[  2929.629] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2929.629] (II) FBDEV: driver for framebuffer: fbdev
[  2929.629] (++) using VT number 1

[  2929.630] (II) [KMS] Kernel modesetting enabled.
[  2929.630] (WW) Falling back to old probe method for vesa
[  2929.630] (WW) Falling back to old probe method for modesetting
[  2929.630] (WW) Falling back to old probe method for fbdev
[  2929.630] (II) Loading sub module "fbdevhw"
[  2929.630] (II) LoadModule: "fbdevhw"
[  2929.630] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  2929.630] (II) Module fbdevhw: vendor="X.Org Foundation"
[  2929.630] 	compiled for 1.14.3, module version = 0.0.2
[  2929.630] 	ABI class: X.Org Video Driver, version 14.1
[  2929.630] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  2929.630] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[  2929.630] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  2929.630] (==) RADEON(0): Default visual is TrueColor
[  2929.630] (==) RADEON(0): RGB weight 888
[  2929.630] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[  2929.630] (--) RADEON(0): Chipset: "ATI Mobility Radeon Graphics" (ChipID = 0x68e4)
[  2929.630] (II) Loading sub module "dri2"
[  2929.630] (II) LoadModule: "dri2"
[  2929.630] (II) Module "dri2" already built-in
[  2929.630] (II) Loading sub module "exa"
[  2929.630] (II) LoadModule: "exa"
[  2929.630] (II) Loading /usr/lib/xorg/modules/libexa.so
[  2929.630] (II) Module exa: vendor="X.Org Foundation"
[  2929.630] 	compiled for 1.14.3, module version = 2.6.0
[  2929.630] 	ABI class: X.Org Video Driver, version 14.1
[  2929.630] (II) RADEON(0): KMS Color Tiling: enabled
[  2929.630] (II) RADEON(0): KMS Color Tiling 2D: enabled
[  2929.630] (II) RADEON(0): KMS Pageflipping: enabled
[  2929.630] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[  2929.632] (II) RADEON(0): Output LVDS has no monitor section
[  2929.635] (II) RADEON(0): Output HDMI-0 has no monitor section
[  2929.653] (II) RADEON(0): Output VGA-0 has no monitor section
[  2929.655] (II) RADEON(0): EDID for output LVDS
[  2929.655] (II) RADEON(0): Printing probed modes for output LVDS
[  2929.655] (II) RADEON(0): Modeline "1600x900"x60.0  107.84  1600 1648 1680 1892  900 902 908 950 -hsync -vsync (57.0 kHz eP)
[  2929.655] (II) RADEON(0): Modeline "1440x900"x59.9  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[  2929.655] (II) RADEON(0): Modeline "1280x854"x59.9   89.25  1280 1352 1480 1680  854 857 867 887 -hsync +vsync (53.1 kHz)
[  2929.655] (II) RADEON(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[  2929.655] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[  2929.655] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[  2929.655] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[  2929.655] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[  2929.655] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[  2929.655] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[  2929.655] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[  2929.658] (II) RADEON(0): EDID for output HDMI-0
[  2929.676] (II) RADEON(0): EDID for output VGA-0
[  2929.676] (II) RADEON(0): Output LVDS connected
[  2929.676] (II) RADEON(0): Output HDMI-0 disconnected
[  2929.676] (II) RADEON(0): Output VGA-0 disconnected
[  2929.676] (II) RADEON(0): Using exact sizes for initial modes
[  2929.676] (II) RADEON(0): Output LVDS using initial mode 1600x900
[  2929.676] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  2929.676] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:20000000 visible:1fa3b000
[  2929.676] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[  2929.676] (==) RADEON(0): DPI set to (96, 96)
[  2929.676] (II) Loading sub module "fb"
[  2929.676] (II) LoadModule: "fb"
[  2929.677] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2929.677] (II) Module fb: vendor="X.Org Foundation"
[  2929.677] 	compiled for 1.14.3, module version = 1.0.0
[  2929.677] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2929.677] (II) Loading sub module "ramdac"
[  2929.677] (II) LoadModule: "ramdac"
[  2929.677] (II) Module "ramdac" already built-in
[  2929.677] (II) UnloadModule: "vesa"
[  2929.677] (II) Unloading vesa
[  2929.677] (II) UnloadModule: "modesetting"
[  2929.677] (II) Unloading modesetting
[  2929.677] (II) UnloadModule: "fbdev"
[  2929.677] (II) Unloading fbdev
[  2929.677] (II) UnloadSubModule: "fbdevhw"
[  2929.677] (II) Unloading fbdevhw
[  2929.677] (--) Depth 24 pixmap format is 32 bpp
[  2929.677] (II) RADEON(0): [DRI2] Setup complete
[  2929.677] (II) RADEON(0): [DRI2]   DRI driver: r600
[  2929.677] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[  2929.677] (II) RADEON(0): Front buffer size: 6000K
[  2929.677] (II) RADEON(0): VRAM usage limit set to 461084K
[  2929.678] (==) RADEON(0): Backing store disabled
[  2929.678] (II) RADEON(0): Direct rendering enabled
[  2929.678] (II) EXA(0): Driver allocated offscreen pixmaps
[  2929.678] (II) EXA(0): Driver registered support for the following operations:
[  2929.678] (II)         Solid
[  2929.678] (II)         Copy
[  2929.678] (II)         Composite (RENDER acceleration)
[  2929.678] (II)         UploadToScreen
[  2929.678] (II)         DownloadFromScreen
[  2929.678] (II) RADEON(0): Acceleration enabled
[  2929.678] (==) RADEON(0): DPMS enabled
[  2929.678] (==) RADEON(0): Silken mouse enabled
[  2929.678] (II) RADEON(0): Set up textured video
[  2929.678] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[  2929.678] (II) RADEON(0): [XvMC] Extension initialized.
[  2929.678] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2929.678] (--) RandR disabled
[  2929.704] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2929.704] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2929.704] (II) AIGLX: enabled GLX_ARB_create_context
[  2929.704] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2929.704] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[  2929.704] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2929.704] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2929.705] (II) AIGLX: Loaded and initialized r600
[  2929.705] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2929.706] (II) RADEON(0): Setting screen physical size to 423 x 238
[  2929.809] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  2929.809] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2929.809] (II) LoadModule: "evdev"
[  2929.810] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2929.810] (II) Module evdev: vendor="X.Org Foundation"
[  2929.810] 	compiled for 1.14.3, module version = 2.8.2
[  2929.810] 	Module class: X.Org XInput Driver
[  2929.810] 	ABI class: X.Org XInput driver, version 19.1
[  2929.810] (II) Using input driver 'evdev' for 'Power Button'
[  2929.810] (**) Power Button: always reports core events
[  2929.810] (**) evdev: Power Button: Device: "/dev/input/event3"
[  2929.810] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2929.810] (--) evdev: Power Button: Found keys
[  2929.810] (II) evdev: Power Button: Configuring as keyboard
[  2929.810] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  2929.810] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2929.810] (**) Option "xkb_rules" "evdev"
[  2929.810] (**) Option "xkb_model" "pc104"
[  2929.810] (**) Option "xkb_layout" "us"
[  2929.847] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  2929.847] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2929.847] (II) Using input driver 'evdev' for 'Video Bus'
[  2929.847] (**) Video Bus: always reports core events
[  2929.847] (**) evdev: Video Bus: Device: "/dev/input/event5"
[  2929.847] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  2929.847] (--) evdev: Video Bus: Found keys
[  2929.847] (II) evdev: Video Bus: Configuring as keyboard
[  2929.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[  2929.847] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  2929.847] (**) Option "xkb_rules" "evdev"
[  2929.847] (**) Option "xkb_model" "pc104"
[  2929.848] (**) Option "xkb_layout" "us"
[  2929.848] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  2929.848] (II) No input driver specified, ignoring this device.
[  2929.848] (II) This device may have been added with another device file.
[  2929.849] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  2929.849] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  2929.849] (II) Using input driver 'evdev' for 'Sleep Button'
[  2929.849] (**) Sleep Button: always reports core events
[  2929.849] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[  2929.849] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  2929.849] (--) evdev: Sleep Button: Found keys
[  2929.849] (II) evdev: Sleep Button: Configuring as keyboard
[  2929.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[  2929.849] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[  2929.849] (**) Option "xkb_rules" "evdev"
[  2929.849] (**) Option "xkb_model" "pc104"
[  2929.849] (**) Option "xkb_layout" "us"
[  2929.850] (II) config/udev: Adding drm device (/dev/dri/card0)
[  2929.851] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[  2929.851] (II) No input driver specified, ignoring this device.
[  2929.851] (II) This device may have been added with another device file.
[  2929.851] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event11)
[  2929.851] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[  2929.851] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[  2929.851] (**) USB 2.0 Camera: always reports core events
[  2929.851] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event11"
[  2929.851] (--) evdev: USB 2.0 Camera: Vendor 0x13d3 Product 0x5130
[  2929.851] (--) evdev: USB 2.0 Camera: Found keys
[  2929.851] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[  2929.851] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11/event11"
[  2929.851] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[  2929.851] (**) Option "xkb_rules" "evdev"
[  2929.851] (**) Option "xkb_model" "pc104"
[  2929.851] (**) Option "xkb_layout" "us"
[  2929.852] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event7)
[  2929.852] (II) No input driver specified, ignoring this device.
[  2929.852] (II) This device may have been added with another device file.
[  2929.853] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event8)
[  2929.853] (II) No input driver specified, ignoring this device.
[  2929.853] (II) This device may have been added with another device file.
[  2929.853] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event4)
[  2929.853] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[  2929.853] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[  2929.853] (**) Asus Laptop extra buttons: always reports core events
[  2929.853] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event4"
[  2929.853] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[  2929.853] (--) evdev: Asus Laptop extra buttons: Found keys
[  2929.853] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[  2929.853] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input4/event4"
[  2929.853] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 10)
[  2929.853] (**) Option "xkb_rules" "evdev"
[  2929.854] (**) Option "xkb_model" "pc104"
[  2929.854] (**) Option "xkb_layout" "us"
[  2929.854] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2929.854] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2929.854] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  2929.855] (**) AT Translated Set 2 keyboard: always reports core events
[  2929.855] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  2929.855] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  2929.855] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  2929.855] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  2929.855] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  2929.855] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  2929.855] (**) Option "xkb_rules" "evdev"
[  2929.855] (**) Option "xkb_model" "pc104"
[  2929.855] (**) Option "xkb_layout" "us"
[  2929.856] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[  2929.856] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[  2929.856] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[  2929.856] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[  2929.856] (II) LoadModule: "synaptics"
[  2929.856] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  2929.856] (II) Module synaptics: vendor="X.Org Foundation"
[  2929.856] 	compiled for 1.14.1, module version = 1.7.1
[  2929.856] 	Module class: X.Org XInput Driver
[  2929.856] 	ABI class: X.Org XInput driver, version 19.1
[  2929.856] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[  2929.856] (**) ETPS/2 Elantech Touchpad: always reports core events
[  2929.856] (**) Option "Device" "/dev/input/event10"
[  2929.956] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[  2929.956] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1280 (res 0)
[  2929.956] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 (res 0)
[  2929.956] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[  2929.956] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[  2929.956] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[  2929.956] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[  2929.956] (**) Option "TapButton1" "1"
[  2929.956] (**) Option "TapButton2" "2"
[  2929.956] (**) Option "TapButton3" "3"
[  2929.956] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  2929.956] (**) ETPS/2 Elantech Touchpad: always reports core events
[  2930.003] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[  2930.003] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[  2930.003] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[  2930.003] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[  2930.003] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.137
[  2930.003] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[  2930.003] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[  2930.003] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  2930.003] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  2930.003] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  2930.004] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  2930.004] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[  2930.004] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  2930.004] (II) No input driver specified, ignoring this device.
[  2930.004] (II) This device may have been added with another device file.
[  2959.309] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2970.747] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2970.773] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  2970.773] setversion 1.4 failed
[  3040.946] (II) AIGLX: Suspending AIGLX clients for VT switch
[  3113.742] (II) AIGLX: Resuming AIGLX clients after VT switch
[  3113.767] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  3130.199] (II) AIGLX: Suspending AIGLX clients for VT switch
[  3137.862] (II) AIGLX: Resuming AIGLX clients after VT switch
[  3137.887] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  3172.859] (II) AIGLX: Suspending AIGLX clients for VT switch
[  3211.960] (II) UnloadModule: "synaptics"
[  3211.960] (II) evdev: AT Translated Set 2 keyboard: Close
[  3211.961] (II) UnloadModule: "evdev"
[  3211.961] (II) evdev: Asus Laptop extra buttons: Close
[  3211.961] (II) UnloadModule: "evdev"
[  3211.961] (II) evdev: USB 2.0 Camera: Close
[  3211.961] (II) UnloadModule: "evdev"
[  3211.961] (II) evdev: Sleep Button: Close
[  3211.961] (II) UnloadModule: "evdev"
[  3211.961] (II) evdev: Video Bus: Close
[  3211.961] (II) UnloadModule: "evdev"
[  3211.961] (II) evdev: Power Button: Close
[  3211.961] (II) UnloadModule: "evdev"
[  3211.976] (EE) Server terminated successfully (0). Closing log file.

floflo77890 · Message par **floflo77890** » sam. 26 oct. 2013, 17:43

pense à utiliser les balises code car là ton message est un peut trop long.

linette · Message par **linette** » sam. 26 oct. 2013, 18:08

+1 pour les balises

Les drivers graphiques sont installés et configurés? (via /etc/xorg.conf ou autre)

floflo77890 · Message par **floflo77890** » sam. 26 oct. 2013, 18:52

es tu sur d'avoir pris les bons drivers graphiques car si tu n'as pas les les bons sa ne risque pas de fonctionner. et sinon tu fait ton installation sur un ordinateur ou une machine virtuel?

jean_no · Message par **jean_no** » sam. 26 oct. 2013, 19:02

Salut

Dis-nous, très précisément, où est situé ton fichier .xinitrc , et donnes aussi son contenu.

Il ne sert à rien à rien de désinstaller et de réinstaller plusieurs fois, seuls les fichiers de configuration sont importants et sont à modifier.

Pour lire le Wiki pendant l'installation, ALT + F2, tu saisis root en login et enfin :

Code : Tout sélectionner

elinks http://wiki.archlinux.fr/Installation

pour Xorg :

Code : Tout sélectionner

elinks http://wiki.archlinux.fr/Xorg

pour Gnome :

Code : Tout sélectionner

elinks http://wiki.archlinux.fr/GNOME

A noter, il n'y a aucune erreur dans le xorg.log

A+

>)))°> · Message par **>)))°>** » sam. 26 oct. 2013, 19:04

pense à utiliser les balises code car là ton message est un peut trop long

desolé, je pensais que les balises spoilers suffiraient

Les drivers graphiques sont installés et configurés? (via /etc/xorg.conf ou autre)

j'ai installé le pilote correspondant à ma carte graphique et configuré le clavier... c'est tout pour le moment

es tu sur d'avoir pris les bons drivers graphiques

je pense que oui ; j'ai une carte amd/ati, alors j'utilise le driver xf86-video-ati

tu fait ton installation sur un ordinateur ou une machine virtuel?

je fais l'installation directement sur un ordi, pas sur une machine virtuelle

la situation a quelque peu evoluée cet aprem :
-j'ai créé un utilisateur non-root, et je lui ai fait un fichier .xinitrc, c'est à partir de là que je continue mes tentatives
-j'ai essayé de faire marcher plusieurs environements, et j'ai réussi à faire fonctionner awesome (c'est dailleurs depuis une session awesome que j'écris ces lignes). Cependant awesome n'est pas mon environement de travail préferentiel (franchement, il est très bien, mais je n'ai vraiment pas le temps de le configurer et de m'y habituer)... Gnome ne marche toujours pas

je vais essayer de vous fournir un log d'erreurs.

floflo77890 · Message par **floflo77890** » sam. 26 oct. 2013, 19:08

et donne nous aussi le

Code : Tout sélectionner

/etc/X11/xorg.conf.d/10-keyboard-layout.conf

car si tu a fait une erreur dedans xorg ne voudra pas démarer.
et as tu essayé le pilote propriétaire catalyst?

Message par **benjarobin** » sam. 26 oct. 2013, 19:22

@ tous (sauf jean_no): C'est bien d'essayer d'aider, mais donner des conseils qui sont complètement à coté de la plaque ne va pas aider >)))°>...
Après je suis d'accord statistiquement vous aller donner une indication qui pourra débloquer >)))°>, mais ce ne serait pas mieux d'analyser le cas de >)))°> sachant qu'il donne toutes les informations nécessaire pour comprendre ce qu'il se passe.

@ >)))°> : Tout fonctionne normalement... Il te suffit de configurer le tout. Il n'y a aucune erreur, il te manque "juste" un petit détail : indiquer de lancer gnome...

Sinon ArchLinux n'est pas une distribution grand publique qui automatise les choses, donc désinstaller et réinstaller quelque chose via pacman va très rarement améliorer les choses... Si vous ne maitriser pas bien l'outil cela ne pourra que s’aggraver...

Je te conseil d'utiliser GDM qui sera beaucoup plus simple d'accès dans un premier temps. Il suffit de l'activer et de le lancer via systemd

Code : Tout sélectionner

systemctl enable gdm
systemctl start gdm

Mais avant tout, il te faut remplir ton fstab... Tu as du oublier cette étape dans l'installation.

floflo77890 · Message par **floflo77890** » sam. 26 oct. 2013, 20:07

j'éssaye juste de savoir si il n'a pas fait d'erreur dans ses fichier de configuration avtn d'analyser sa situation.
et surtout de savoir si il a prit les bons frivers graphiques car il marque qu'il a une carte amd/ati et qu'il a mis les pilotes ati mais quand on regarde sur le wiki les cartes amd/ati rentrent dans les pilotes propriétaire catalyst.

Message par **benjarobin** » sam. 26 oct. 2013, 22:43

Tu as tout faux... Sa configuration est bonne, son log en l'atteste. Pour le reste il faut apprendre à lire comme à écrire !!!

>)))°> · Message par **>)))°>** » dim. 27 oct. 2013, 12:48

Sinon ArchLinux n'est pas une distribution grand publique qui automatise les choses, donc désinstaller et réinstaller quelque chose via pacman va très rarement améliorer les choses... Si vous ne maitriser pas bien l'outil cela ne pourra que s’aggraver...

C'est à dire que je pensais avoir corrompu des fichiers (mais c'est vrai que ça n'est pas la solution)

Mais avant tout, il te faut remplir ton fstab... Tu as du oublier cette étape dans l'installation.

Ça c'est fait

et donne nous aussi le
/etc/X11/xorg.conf.d/10-keyboard-layout.conf
car si tu a fait une erreur dedans xorg ne voudra pas démarer.
et as tu essayé le pilote propriétaire catalyst?

je n'ai pas encore essayé le pilote catalyst, par contre il y avait effectivement une faute de frappe dans 10-keyboard-layout.conf que j'ai pu corriger

floflo77890 · Message par **floflo77890** » dim. 27 oct. 2013, 14:33

alors avec gdm tu as réussi a demarer ton environement graphique?

>)))°> · Message par **>)))°>** » dim. 27 oct. 2013, 23:56

eh bien non, pas pour le moment

j'ai testé gdm ; mais il ne fonctionne pas. Tout ce que j'ai, c'est un écran noir avec un underscore qui clignote dans le coin gauche, indéfiniment.
Voici ce que me renvoit un systemctl status gdm ;

gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since dim. 2013-10-27 23:50:39 CET; 10min ago
Main PID: 814 (gdm)
CGroup: /system.slice/gdm.service
└─814 /usr/bin/gdm

oct. 27 23:51:05 localhost gdm[814]: GLib-GObject: g_object_unref: assertion 'object->ref_count > 0' failed
oct. 27 23:51:05 localhost gdm[814]: GdmDisplay: display lasted 0,056514 seconds
oct. 27 23:51:04 localhost systemd-coredump[831]: Process 817 (gdm-simple-slav) dumped core.
oct. 27 23:51:30 localhost gdm[814]: [210B blob data]
oct. 27 23:51:30 localhost systemd-coredump[872]: Process 864 (gdm-simple-slav) dumped core.
oct. 27 23:51:33 localhost gdm[814]: Child process 878 was already dead.
oct. 27 23:51:33 localhost gdm[814]: GLib-GObject: g_object_ref: assertion 'object->ref_count > 0' failed
oct. 27 23:51:33 localhost gdm[814]: GLib-GObject: g_object_unref: assertion 'object->ref_count > 0' failed
oct. 27 23:51:33 localhost gdm[814]: GdmDisplay: display lasted 0,038363 seconds
oct. 27 23:51:33 localhost gdm[814]: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors

et voici un lien vers mes logs xorg (qui ne font pourtant pas mention de gdm) ;
Xorg.0.log
Xorg.1.log
Xorg.2.log
Xorg.3.log
Xorg.4.log
Xorg.5.log

floflo77890 · Message par **floflo77890** » lun. 28 oct. 2013, 09:10

tu as essayé de relancer manuellement avec

Code : Tout sélectionner

startx

en voulant tester gnnome j'ai le même problème que toi. je lance startx et rien ne se passe un écran noir et rien d'autre.

Xorg · Message par **Xorg** » lun. 28 oct. 2013, 17:33

Beurk, Vesa.

En général, c'est plus simple avec les pilotes libres qu'avec les pilotes propriétaires, donc ce n'est pas la peine qu'il galère avec Catalyst pour le moment, il verra plus tard s'il est intéressé par Catalyst.

Dans le répertoire /etc/X11/xorg.conf.d/, normalement tu devrais avoir créé un fichier 20-radeon.conf avec, au minimum, le contenu suivant :

Code : Tout sélectionner

Section "Device"
    Identifier "Card0"
    Driver "radeon"
EndSection

En effet, sans indiquer que tu veux utiliser le pilote Radeon, X.Org ne va pas le deviner, et donc il y a peu de chances que ça fonctionne. Nous pouvons t'aider si tu n'es pas à l'aise avec la configuration de X.Org, mais sans, ça ne fonctionnera pas.

Au passage, qui dit pilote libre (Radeon) dit KMS. Et quand on dit KMS, il y a forcément un conflit avec les framebuffers (je dis ça car je vois une trace de framebuffer de ton log). Tu n'as pas une option telle vga= dans les options du noyau dans ton bootloader ?
Tu peux nous donner la sortie de la commande cat /proc/cmdline si tu ne vois pas de quoi je parle.

En espérant t'avoir un peu aidé.

PS : Pour que la commande startx fonctionne, il faut un fichier ~/.xinitrc valide.

Message par **FoolEcho** » lun. 28 oct. 2013, 17:43

Xorg a écrit :Au passage, qui dit pilote libre (Radeon) dit KMS. Et quand on dit KMS, il y a forcément un conflit avec les framebuffers (je dis ça car je vois une trace de framebuffer de ton log). Tu n'as pas une option telle vga= dans les options du noyau dans ton bootloader ?
Tu peux nous donner la sortie de la commande cat /proc/cmdline si tu ne vois pas de quoi je parle.

Il n'a pas ce problème, cf. log précédent de X (l'option vga apparaîtrait sur la ligne du kernel).

floflo77890 · Message par **floflo77890** » lun. 28 oct. 2013, 18:11

il ne peut pas y avoir un problème directement avec gnome car moi mon ~/.xinitrc est valide et ma configuration de xorg est bonne mais gnome ne veut pas démarrer.
tout ce que j'ai c'est un écran noir avec une sourie.

>)))°> · Message par **>)))°>** » lun. 28 oct. 2013, 22:18

Tu n'as pas une option telle vga= dans les options du noyau dans ton bootloader ?

j'ai vérifié, et non

Dans le répertoire /etc/X11/xorg.conf.d/, normalement tu devrais avoir créé un fichier 20-radeon.conf

j'ai découvert que ce fichier était absent

du coup je l'ai ajouté en lui donnant la configuration minimale décrite par Xorg

cependant, ça ne règle pas encore le problème. Contrairement à floflo je n'ai même pas droit à une souris, juste un écran noir, puis l'écran d'erreur de gnome ("oh no! something has gone wrong!", avec la tête d'un ordi visiblement en proie au désarroi moral)

voici le log : xorg.0.log

c'est curieux, il ne semble pourtant pas y avoir d'erreur... (enfin j'dis ça, c'est vrai que je n'y connais pas grand chose à xorg)

floflo77890 · Message par **floflo77890** » lun. 28 oct. 2013, 23:27

Peut tu nous donner le contenu de tes fichiers de configuration de xorg et ton xinitrtc.
A tu installer les paquet gnome-extrat

>)))°> · Message par **>)))°>** » mar. 29 oct. 2013, 00:56

Peut tu nous donner le contenu de tes fichiers de configuration de xorg et ton xinitrtc.

voilà ;
10-evdev.conf
10-keyboard-layout.conf
10-keyboard-terminate.conf
10-quirks.conf
20-radeon.conf
50-joystick.conf
50-synaptics.conf
50-vmmouse.conf

et voici mon xinitrc ;

Code : Tout sélectionner

#!/bin/bash

if [[ $1 == "awesome" ]]
then
    exec awesome
elif [[ $1 == "gnome" ]]
then
    exec gnome-session
else
    exec awesome
fi

Je le lance avec xinit. Ça me permet d'utiliser awesome en attendant que gnome fonctionne, sans avoir à modifier mon xinitrc à chaque test.

A tu installer les paquet gnome-extrat

Pas pour le moment. Ce package contient des programmes optionels, non?

Arch Linux

Archlinux.fr [Forums]

[xorg] impossible de faire démarrer gnome

[xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome

Re: [xorg] impossible de faire démarrer gnome