Merci de cette réponse rapide.
Le fichier log est sans intérêt : il date de la carte précédente. Je ne comprend d'ailleurs pas pourquoi.
J'avais chargé les pilotes intel avec
.
Voici quand même les réponses demandées :
Code : Tout sélectionner
# grep -REv "^ *$|^ *#" /etc/modprobe* /usr/lib/modprobe* /etc/modules-load* /usr/lib/modules-load* /etc/mkinitcpio.conf /etc/X11/xorg*
/etc/modprobe.d/modprobe.conf:blacklist nv
/etc/modprobe.d/modprobe.conf:blacklist nvidia
/etc/modprobe.d/modprobe.conf:blacklist nouveau
/etc/modprobe.d/blacklist-8192cu-dkms.conf:blacklist rtlwifi
/etc/modprobe.d/blacklist-8192cu-dkms.conf:blacklist rtl8192c_common
/etc/modprobe.d/blacklist-8192cu-dkms.conf:blacklist rtl8192cu
/usr/lib/modprobe.d/bluetooth-usb.conf:options btusb reset=1
/usr/lib/modprobe.d/usb-load-ehci-first.conf:softdep ohci_hcd pre: ehci_hcd
/usr/lib/modprobe.d/usb-load-ehci-first.conf:softdep uhci_hcd pre: ehci_hcd
/usr/lib/modprobe.d/nvidia.conf:blacklist nouveau
/etc/mkinitcpio.conf:MODULES="pata_amd ahci libahci xhci-hcd ehci-hcd ohci-hcd ext3 ext4 vfat intel_agp i915"
/etc/mkinitcpio.conf:BINARIES=""
/etc/mkinitcpio.conf:FILES=""
/etc/mkinitcpio.conf:HOOKS="base udev autodetect plymouth modconf block filesystems keyboard fsck"
/etc/X11/xorg.conf.d/10-monitor.conf:Section "Monitor"
/etc/X11/xorg.conf.d/10-monitor.conf: Identifier "Monitor0"
/etc/X11/xorg.conf.d/10-monitor.conf: Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
/etc/X11/xorg.conf.d/10-monitor.conf: Option "PreferredMode" "1440x900_60.00"
/etc/X11/xorg.conf.d/10-monitor.conf:EndSection
/etc/X11/xorg.conf.d/20-intel.conf:Section "Device"
/etc/X11/xorg.conf.d/20-intel.conf: Identifier "Intel Graphics"
/etc/X11/xorg.conf.d/20-intel.conf: Driver "intel"
/etc/X11/xorg.conf.d/20-intel.conf: Option "AccelMethod" "sna"
/etc/X11/xorg.conf.d/20-intel.conf: Option "TearFree" "true"
/etc/X11/xorg.conf.d/20-intel.conf:EndSection
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: Identifier "Keyboard Layout"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: MatchIsKeyboard "yes"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: Option "XkbLayout" "fr"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: Option "XkbVariant" "latin9" # accès aux caractères spéciaux plus logique avec "Alt Gr" (ex : « » avec "Alt Gr" w x)
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:EndSection
/etc/X11/xorg.conf.old/20-nouveau.conf:Section "ServerLayout"
/etc/X11/xorg.conf.old/20-nouveau.conf: Identifier "Layout0"
/etc/X11/xorg.conf.old/20-nouveau.conf: Screen 0 "Screen0" 0 0
/etc/X11/xorg.conf.old/20-nouveau.conf: InputDevice "Keyboard0" "CoreKeyboard"
/etc/X11/xorg.conf.old/20-nouveau.conf: InputDevice "Mouse0" "CorePointer"
/etc/X11/xorg.conf.old/20-nouveau.conf:EndSection
/etc/X11/xorg.conf.old/20-nouveau.conf:Section "Files"
/etc/X11/xorg.conf.old/20-nouveau.conf:EndSection
/etc/X11/xorg.conf.old/20-nouveau.conf:Section "InputDevice"
/etc/X11/xorg.conf.old/20-nouveau.conf: Identifier "Mouse0"
/etc/X11/xorg.conf.old/20-nouveau.conf: Driver "mouse"
/etc/X11/xorg.conf.old/20-nouveau.conf: Option "Protocol" "auto"
/etc/X11/xorg.conf.old/20-nouveau.conf: Option "Device" "/dev/psaux"
/etc/X11/xorg.conf.old/20-nouveau.conf: Option "Emulate3Buttons" "no"
/etc/X11/xorg.conf.old/20-nouveau.conf: Option "ZAxisMapping" "4 5"
/etc/X11/xorg.conf.old/20-nouveau.conf:EndSection
/etc/X11/xorg.conf.old/20-nouveau.conf:Section "Device"
/etc/X11/xorg.conf.old/20-nouveau.conf: Identifier "Device0"
/etc/X11/xorg.conf.old/20-nouveau.conf: Driver "nouveau"
/etc/X11/xorg.conf.old/20-nouveau.conf: VendorName "NVIDIA Corporation"
/etc/X11/xorg.conf.old/20-nouveau.conf: BusID "PCI:0:16:0"
/etc/X11/xorg.conf.old/20-nouveau.conf:EndSection
/etc/X11/xorg.conf.old/20-nouveau.conf:Section "Screen"
/etc/X11/xorg.conf.old/20-nouveau.conf: Identifier "Screen0"
/etc/X11/xorg.conf.old/20-nouveau.conf: Device "Device0"
/etc/X11/xorg.conf.old/20-nouveau.conf: Monitor "Monitor0"
/etc/X11/xorg.conf.old/20-nouveau.conf: DefaultDepth 24
/etc/X11/xorg.conf.old/20-nouveau.conf: SubSection "Display"
/etc/X11/xorg.conf.old/20-nouveau.conf: Depth 24
/etc/X11/xorg.conf.old/20-nouveau.conf: EndSubSection
/etc/X11/xorg.conf.old/20-nouveau.conf:EndSection
/etc/X11/xorg.conf.old/10-keyboard.conf:Section "InputDevice"
/etc/X11/xorg.conf.old/10-keyboard.conf: Identifier "Keyboard0"
/etc/X11/xorg.conf.old/10-keyboard.conf: Driver "kbd"
/etc/X11/xorg.conf.old/10-keyboard.conf: Option "XkbdLayout" "fr"
/etc/X11/xorg.conf.old/10-keyboard.conf: Option "XkbVariant" "latin9"
/etc/X11/xorg.conf.old/10-keyboard.conf:EndSection
/etc/X11/xorg.conf.old/10-monitor.conf:Section "Monitor"
/etc/X11/xorg.conf.old/10-monitor.conf: Identifier "Monitor0"
/etc/X11/xorg.conf.old/10-monitor.conf: VendorName "Unknown"
/etc/X11/xorg.conf.old/10-monitor.conf: ModelName "Unknown"
/etc/X11/xorg.conf.old/10-monitor.conf: HorizSync 28.0 - 33.0
/etc/X11/xorg.conf.old/10-monitor.conf: VertRefresh 43.0 - 72.0
/etc/X11/xorg.conf.old/10-monitor.conf: Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
/etc/X11/xorg.conf.old/10-monitor.conf: Option "DPMS"
/etc/X11/xorg.conf.old/10-monitor.conf: Option "PreferredMode" "1440x900_60.00"
/etc/X11/xorg.conf.old/10-monitor.conf:EndSection
et
Code : Tout sélectionner
# pacman -Qsq "(nvidia|nouveau|intel|xf86|libgl)"
libglade
libvdpau
libxxf86dga
libxxf86vm
mesa
nvidia-304xx
nvidia-304xx-libgl
nvidia-304xx-utils
xf86-input-evdev
xf86-video-intel
xf86dgaproto
xf86vidmodeproto
Code : Tout sélectionner
# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.19.0-23-generic root=UUID=167b350b-03df-44b6-ace3-7a78f299ac66 ro persistent acpi=off irqpoll quiet splash vt.handoff=7
(J'accède actuellement à ma session Arch en chroot à partir d'une session ubuntu, c'est quand même plus pratique pour les copier-coller)
Il y a peut-être lieu de purger les modules nvidia ?
Je rappelle que mon écran est toujours branché directement sur la CM, l'ancienne avait une puce graphique nvidia et l'actuelle une puce intel.
Il y a bien un module intel installé, mais il semble correspondre à l'audio et non au graphique :
Code : Tout sélectionner
# lsmod | grep intel
snd_hda_intel 36864 3
snd_hda_controller 32768 1 snd_hda_intel
snd_hda_codec 143360 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_pcm 106496 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd 90112 20 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
Pourtant j'ai bien installé le module graphique intel.
La date du fichier Xorg.0.log m'intrigue : j'ai pourtant accédé à Arch (en mode console, mais parce que l'affichage graphique ne s'est pas activé) et je pensais qu'il aurait du s'incrémenter, or il est daté du 14 juillet, et à cd moment j'avais encore l'ancienne configuration.
A défaut, j'ai un fichier $USER/.local/share/xorg/Xorg.0.log :
Code : Tout sélectionner
cat ~/.local/share/xorg/Xorg.0.log
[ 665.694]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 665.694] X Protocol Version 11, Revision 0
[ 665.694] Build Operating System: Linux 4.0.4-2-ARCH x86_64
[ 665.694] Current Operating System: Linux Arch 4.1.2-2-ARCH #1 SMP PREEMPT Wed Jul 15 08:30:32 UTC 2015 x86_64
[ 665.694] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=39291c36-2c0e-4b32-98ff-e2a160373e90 rw quiet splash net.ifnames=0
[ 665.694] Build Date: 17 July 2015 05:38:19PM
[ 665.694]
[ 665.694] Current version of pixman: 0.32.6
[ 665.694] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 665.694] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 665.695] (==) Log file: "/home/francis/.local/share/xorg/Xorg.0.log", Time: Fri Jul 24 10:45:01 2015
[ 665.695] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 665.695] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 665.695] (==) No Layout section. Using the first Screen section.
[ 665.695] (==) No screen section available. Using defaults.
[ 665.695] (**) |-->Screen "Default Screen Section" (0)
[ 665.695] (**) | |-->Monitor "<default monitor>"
[ 665.695] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 665.695] (**) | |-->Device "Intel Graphics"
[ 665.695] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 665.695] (==) Automatically adding devices
[ 665.695] (==) Automatically enabling devices
[ 665.695] (==) Automatically adding GPU devices
[ 665.695] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 665.695] Entry deleted from font path.
[ 665.695] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 665.695] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 665.695] Entry deleted from font path.
[ 665.695] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 665.695] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 665.696] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 665.696] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 665.696] (II) Loader magic: 0x817d60
[ 665.696] (II) Module ABI versions:
[ 665.696] X.Org ANSI C Emulation: 0.4
[ 665.696] X.Org Video Driver: 19.0
[ 665.696] X.Org XInput driver : 21.1
[ 665.696] X.Org Server Extension : 9.0
[ 665.699] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[ 665.700] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 665.701] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 665.702] (--) PCI:*(0:0:2:0) 8086:2e32:1458:d000 rev 3, Mem @ 0xfd800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/8
[ 665.702] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 665.702] (II) LoadModule: "glx"
[ 665.703] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 665.720] (II) Module glx: vendor="NVIDIA Corporation"
[ 665.720] compiled for 4.0.2, module version = 1.0.0
[ 665.720] Module class: X.Org Server Extension
[ 665.720] (II) NVIDIA GLX Module 304.125 Mon Dec 1 20:22:48 PST 2014
[ 665.720] (II) LoadModule: "intel"
[ 665.720] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 665.721] (II) Module intel: vendor="X.Org Foundation"
[ 665.721] compiled for 1.17.2, module version = 2.99.917
[ 665.721] Module class: X.Org Video Driver
[ 665.721] ABI class: X.Org Video Driver, version 19.0
[ 665.721] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 665.721] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 665.721] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 665.721] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 665.721] (++) using VT number 1
[ 665.721] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 665.722] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[ 665.722] (II) intel(0): SNA compiled from 2.99.917-381-g5772556
[ 665.722] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 665.722] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 665.722] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 2 threads
[ 665.722] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 665.722] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 665.722] (==) intel(0): RGB weight 888
[ 665.722] (==) intel(0): Default visual is TrueColor
[ 665.722] (**) intel(0): Option "AccelMethod" "sna"
[ 665.722] (**) intel(0): Option "TearFree" "true"
[ 665.723] (II) intel(0): Output VGA1 has no monitor section
[ 665.723] (II) intel(0): Enabled output VGA1
[ 665.723] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 665.723] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 665.723] (II) intel(0): Enabled output VIRTUAL1
[ 665.723] (--) intel(0): Output VGA1 using initial mode 1680x1050 on pipe 0
[ 665.723] (**) intel(0): TearFree enabled
[ 665.723] (==) intel(0): DPI set to (96, 96)
[ 665.723] (II) Loading sub module "dri2"
[ 665.723] (II) LoadModule: "dri2"
[ 665.723] (II) Module "dri2" already built-in
[ 665.723] (II) Loading sub module "present"
[ 665.723] (II) LoadModule: "present"
[ 665.723] (II) Module "present" already built-in
[ 665.723] (==) Depth 24 pixmap format is 32 bpp
[ 665.724] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[ 665.724] (==) intel(0): Backing store enabled
[ 665.724] (==) intel(0): Silken mouse enabled
[ 665.724] (II) intel(0): HW Cursor enabled
[ 665.724] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 665.724] (==) intel(0): DPMS enabled
[ 665.724] (==) intel(0): Display hotplug detection enabled
[ 665.724] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 665.724] (II) intel(0): [DRI2] Setup complete
[ 665.724] (II) intel(0): [DRI2] DRI driver: i965
[ 665.724] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 665.724] (II) intel(0): direct rendering: DRI2 enabled
[ 665.724] (II) intel(0): hardware support for Present enabled
[ 665.724] (--) RandR disabled
[ 665.736] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 665.748] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 665.748] (II) intel(0): Setting screen physical size to 444 x 277
[ 665.808] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 665.808] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 665.808] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 665.808] (II) LoadModule: "evdev"
[ 665.808] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 665.809] (II) Module evdev: vendor="X.Org Foundation"
[ 665.809] compiled for 1.17.1, module version = 2.9.2
[ 665.809] Module class: X.Org XInput Driver
[ 665.809] ABI class: X.Org XInput driver, version 21.0
[ 665.810] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
[ 665.810] (II) Using input driver 'evdev' for 'Power Button'
[ 665.810] (**) Power Button: always reports core events
[ 665.810] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 665.810] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 665.810] (--) evdev: Power Button: Found keys
[ 665.810] (II) evdev: Power Button: Configuring as keyboard
[ 665.810] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 665.810] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 665.810] (**) Option "xkb_rules" "evdev"
[ 665.810] (**) Option "xkb_model" "pc104"
[ 665.810] (**) Option "xkb_layout" "fr"
[ 665.810] (**) Option "xkb_variant" "latin9"
[ 665.844] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 665.844] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 665.844] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 665.845] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
[ 665.845] (II) Using input driver 'evdev' for 'Power Button'
[ 665.845] (**) Power Button: always reports core events
[ 665.845] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 665.845] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 665.845] (--) evdev: Power Button: Found keys
[ 665.845] (II) evdev: Power Button: Configuring as keyboard
[ 665.845] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 665.845] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 665.845] (**) Option "xkb_rules" "evdev"
[ 665.845] (**) Option "xkb_model" "pc104"
[ 665.845] (**) Option "xkb_layout" "fr"
[ 665.845] (**) Option "xkb_variant" "latin9"
[ 665.847] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 665.847] (II) No input driver specified, ignoring this device.
[ 665.847] (II) This device may have been added with another device file.
[ 665.847] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event4)
[ 665.847] (II) No input driver specified, ignoring this device.
[ 665.847] (II) This device may have been added with another device file.
[ 665.848] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event5)
[ 665.848] (II) No input driver specified, ignoring this device.
[ 665.848] (II) This device may have been added with another device file.
[ 665.848] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 665.849] (II) No input driver specified, ignoring this device.
[ 665.849] (II) This device may have been added with another device file.
[ 665.849] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7)
[ 665.849] (II) No input driver specified, ignoring this device.
[ 665.849] (II) This device may have been added with another device file.
[ 665.850] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event8)
[ 665.850] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 665.850] (**) UVC Camera (046d:09a4): Applying InputClass "Keyboard Layout"
[ 665.851] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 15 paused 0
[ 665.851] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 665.851] (**) UVC Camera (046d:09a4): always reports core events
[ 665.851] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event8"
[ 665.851] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 665.851] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 665.851] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 665.851] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-5/5-5:1.0/input/input9/event8"
[ 665.851] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 8)
[ 665.851] (**) Option "xkb_rules" "evdev"
[ 665.851] (**) Option "xkb_model" "pc104"
[ 665.851] (**) Option "xkb_layout" "fr"
[ 665.851] (**) Option "xkb_variant" "latin9"
[ 665.852] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 665.852] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 665.852] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Layout"
[ 665.853] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[ 665.853] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 665.853] (**) AT Translated Set 2 keyboard: always reports core events
[ 665.853] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 665.853] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 665.853] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 665.853] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 665.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 665.853] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 665.853] (**) Option "xkb_rules" "evdev"
[ 665.853] (**) Option "xkb_model" "pc104"
[ 665.853] (**) Option "xkb_layout" "fr"
[ 665.853] (**) Option "xkb_variant" "latin9"
[ 665.854] (II) config/udev: Adding input device PS/2 Logitech Mouse (/dev/input/event10)
[ 665.854] (**) PS/2 Logitech Mouse: Applying InputClass "evdev pointer catchall"
[ 665.855] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 17 paused 0
[ 665.855] (II) Using input driver 'evdev' for 'PS/2 Logitech Mouse'
[ 665.855] (**) PS/2 Logitech Mouse: always reports core events
[ 665.855] (**) evdev: PS/2 Logitech Mouse: Device: "/dev/input/event10"
[ 665.855] (--) evdev: PS/2 Logitech Mouse: Vendor 0x2 Product 0x1
[ 665.855] (--) evdev: PS/2 Logitech Mouse: Found 3 mouse buttons
[ 665.855] (--) evdev: PS/2 Logitech Mouse: Found relative axes
[ 665.855] (--) evdev: PS/2 Logitech Mouse: Found x and y relative axes
[ 665.855] (II) evdev: PS/2 Logitech Mouse: Configuring as mouse
[ 665.855] (**) evdev: PS/2 Logitech Mouse: YAxisMapping: buttons 4 and 5
[ 665.856] (**) evdev: PS/2 Logitech Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 665.856] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 665.856] (II) XINPUT: Adding extended input device "PS/2 Logitech Mouse" (type: MOUSE, id 10)
[ 665.856] (II) evdev: PS/2 Logitech Mouse: initialized for relative axes.
[ 665.856] (**) PS/2 Logitech Mouse: (accel) keeping acceleration scheme 1
[ 665.856] (**) PS/2 Logitech Mouse: (accel) acceleration profile 0
[ 665.856] (**) PS/2 Logitech Mouse: (accel) acceleration factor: 2.000
[ 665.856] (**) PS/2 Logitech Mouse: (accel) acceleration threshold: 4
[ 665.857] (II) config/udev: Adding input device PS/2 Logitech Mouse (/dev/input/mouse0)
[ 665.857] (II) No input driver specified, ignoring this device.
[ 665.857] (II) This device may have been added with another device file.
[ 665.857] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 665.857] (II) No input driver specified, ignoring this device.
[ 665.857] (II) This device may have been added with another device file.
[ 682.977] (II) evdev: PS/2 Logitech Mouse: Close
[ 682.977] (II) UnloadModule: "evdev"
[ 682.977] (II) systemd-logind: releasing fd for 13:74
[ 683.020] (II) evdev: AT Translated Set 2 keyboard: Close
[ 683.020] (II) UnloadModule: "evdev"
[ 683.020] (II) systemd-logind: releasing fd for 13:66
[ 683.050] (II) evdev: UVC Camera (046d:09a4): Close
[ 683.050] (II) UnloadModule: "evdev"
[ 683.050] (II) systemd-logind: releasing fd for 13:72
[ 683.116] (II) evdev: Power Button: Close
[ 683.116] (II) UnloadModule: "evdev"
[ 683.116] (II) systemd-logind: releasing fd for 13:64
[ 683.144] (II) evdev: Power Button: Close
[ 683.144] (II) UnloadModule: "evdev"
[ 683.144] (II) systemd-logind: releasing fd for 13:65
[ 683.190] (II) Server terminated successfully (0). Closing log file.
Ce fichier est daté de ce matin (10h45)
[Edit]
Je viens de remarquer dans le fichier log la ligne
Code : Tout sélectionner
[ 665.736] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
C'est grave, docteur ?
(les modules nvidia, nouveau et nv sont blacklistés)
[/Edit]
