Archlinux.fr [Forums]

Forum d'entraide ! Posez vos questions ici
https://forums.archlinux.fr/

[xorg] Impossible d'initialiser le module Glx (Résolu) + Impossible de changer de terminal virtuel

https://forums.archlinux.fr/viewtopic.php?t=17816

Page 1 sur 1

[xorg] Impossible d'initialiser le module Glx (Résolu) + Impossible de changer de terminal virtuel

Publié : dim. 17 janv. 2016, 21:26
par hexaspray
Bonjour à toutes et à tous !

Je me permet de poster ce message en raison de problèmes techniques avec Xorg.
J'ai fait l'acquisition d'un nouvel ordinateur portable équipé de la technologie Optimus. Après de nombreuses installations et de nombreux échecs avec Xorg (No Device, No Screen etc. ...): j'opte donc pour la solution "Discrete" dans le bios.

Du coup ! mon serveur graphique se lance mais avec deux bugs assez crispants. Lorsque Xorg est lancé :
- Il m'est impossible de basculer sur un autre terminal virtuel (BlackScreen).
- Le module Glx "n'est pas initialisé" :

Code : Tout sélectionner

[   513.732] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[   513.732] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[   513.732] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[   513.732] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[   513.732] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
Un petit coup de pouce serait le bienvenue ! :D
Ma santé psychologique en dépend ... :shock:

Voilà mon Xorg.0.log et mes fichiers de configuration :

Code : Tout sélectionner

Release Date: 2015-11-09
[   513.627] X Protocol Version 11, Revision 0
[   513.627] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[   513.628] Current Operating System: Linux H3X4 4.3.3-2-ARCH #1 SMP PREEMPT Wed Dec 23 20:09:18 CET 2015 x86_64
[   513.628] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6930020d-17eb-4463-9f36-2a829e92ffc5 rw
[   513.628] Build Date: 08 January 2016  05:56:16PM
[   513.628]  
[   513.628] Current version of pixman: 0.32.8
[   513.628]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   513.628] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   513.628] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 17 19:14:45 2016
[   513.630] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   513.630] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   513.632] (==) ServerLayout "Layout0"
[   513.632] (**) |-->Screen "Screen0" (0)
[   513.632] (**) |   |-->Monitor "Monitor0"
[   513.632] (**) |   |-->Device "Device0"
[   513.632] (==) Automatically adding devices
[   513.632] (==) Automatically enabling devices
[   513.632] (==) Automatically adding GPU devices
[   513.632] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   513.634] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   513.634]    Entry deleted from font path.
[   513.635] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   513.635]    Entry deleted from font path.
[   513.635]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   513.635] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   513.635]    Entry deleted from font path.
[   513.635]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   513.635] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/OTF/
[   513.635] (==) ModulePath set to "/usr/lib/xorg/modules"
[   513.635] (II) The server relies on udev to provide the list of input devices.                                                    
        If no devices become available, reconfigure udev or disable AutoAddDevices.                                                  
[   513.635] (II) Loader magic: 0x819d40                                                                                             
[   513.635] (II) Module ABI versions:                                                                                               
[   513.635]    X.Org ANSI C Emulation: 0.4                                                                                          
[   513.635]    X.Org Video Driver: 20.0                                                                                             
[   513.635]    X.Org XInput driver : 22.1                                                                                           
[   513.635]    X.Org Server Extension : 9.0                                                                                         
[   513.636] (++) using VT number 3                                                                                                  
                                                                                                                                     
[   513.636] (--) controlling tty is VT number 3, auto-enabling KeepTty                                                              
[   513.641] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3                                         
[   513.643] (--) PCI:*(0:1:0:0) 10de:13d8:1558:6541 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288                                                                                        
[   513.643] (II) Open ACPI successful (/var/run/acpid.socket)                                                                       
[   513.643] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.                           
[   513.643] (II) LoadModule: "extmod"                                                                                               
[   513.643] (II) Module "extmod" already built-in                                                                                   
[   513.643] (II) LoadModule: "dbe"                                                                                                  
[   513.643] (II) Module "dbe" already built-in                                                                                      
[   513.643] (II) LoadModule: "glx"                                                                                                  
[   513.645] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so                                                                 
[   513.656] (II) Module glx: vendor="X.Org Foundation"                                                                              
[   513.656]    compiled for 1.18.0, module version = 1.0.0                                                                          
[   513.656]    ABI class: X.Org Server Extension, version 9.0                                                                       
[   513.656] (==) AIGLX enabled                                                                                                      
[   513.656] (II) LoadModule: "nvidia"                                                                                               
[   513.657] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so                                                                
[   513.661] (II) Module nvidia: vendor="NVIDIA Corporation"                                                                         
[   513.661]    compiled for 4.0.2, module version = 1.0.0                                                                           
[   513.661]    Module class: X.Org Video Driver                                                                                     
[   513.662] (II) NVIDIA dlloader X Driver  358.16  Mon Nov 16 18:32:40 PST 2015                                                     
[   513.662] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs                                                                
[   513.663] (II) Loading sub module "fb"                                                                                            
[   513.663] (II) LoadModule: "fb"                                                                                                   
[   513.663] (II) Loading /usr/lib/xorg/modules/libfb.so                                                                             
[   513.664] (II) Module fb: vendor="X.Org Foundation"                                                                               
[   513.664]    compiled for 1.18.0, module version = 1.0.0                                                                          
[   513.664]    ABI class: X.Org ANSI C Emulation, version 0.4                                                                       
[   513.664] (II) Loading sub module "wfb"                                                                                           
[   513.664] (II) LoadModule: "wfb"
[   513.664] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   513.665] (II) Module wfb: vendor="X.Org Foundation"
[   513.665]    compiled for 1.18.0, module version = 1.0.0
[   513.665]    ABI class: X.Org ANSI C Emulation, version 0.4
[   513.665] (II) Loading sub module "ramdac"
[   513.665] (II) LoadModule: "ramdac"
[   513.665] (II) Module "ramdac" already built-in
[   513.731] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   513.731] (==) NVIDIA(0): RGB weight 888
[   513.731] (==) NVIDIA(0): Default visual is TrueColor
[   513.731] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   513.732] (**) NVIDIA(0): Option "NoLogo" "true"
[   513.732] (**) NVIDIA(0): Option "UseEdidDpi" "false"
[   513.732] (**) NVIDIA(0): Enabling 2D acceleration
[   513.732] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[   513.732] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[   513.732] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[   513.732] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[   513.732] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[   514.308] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[   514.308] (--) NVIDIA(0):     DFP-0
[   514.308] (--) NVIDIA(0):     DFP-1 (boot)
[   514.308] (--) NVIDIA(0):     DFP-2
[   514.308] (--) NVIDIA(0):     DFP-3
[   514.308] (--) NVIDIA(0):     DFP-4
[   514.308] (--) NVIDIA(0):     DFP-5
[   514.308] (--) NVIDIA(0): DFP-0: disconnected
[   514.308] (--) NVIDIA(0): DFP-0: Internal TMDS
[   514.308] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[   514.308] (--) NVIDIA(0): 
[   514.308] (--) NVIDIA(0): LGD (DFP-1): connected
[   514.308] (--) NVIDIA(0): LGD (DFP-1): Internal DisplayPort
[   514.308] (--) NVIDIA(0): LGD (DFP-1): 960.0 MHz maximum pixel clock
[   514.308] (--) NVIDIA(0): 
[   514.308] (--) NVIDIA(0): DFP-2: disconnected
[   514.308] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[   514.308] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[   514.308] (--) NVIDIA(0): 
[   514.308] (--) NVIDIA(0): DFP-3: disconnected
[   514.308] (--) NVIDIA(0): DFP-3: Internal TMDS
[   514.308] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[   514.308] (--) NVIDIA(0): 
[   514.308] (--) NVIDIA(0): DFP-4: disconnected
[   514.308] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[   514.308] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[   514.308] (--) NVIDIA(0): 
[   514.308] (--) NVIDIA(0): DFP-5: disconnected
[   514.308] (--) NVIDIA(0): DFP-5: Internal TMDS
[   514.308] (--) NVIDIA(0): DFP-5: 330.0 MHz maximum pixel clock
[   514.308] (--) NVIDIA(0): 
[   514.308] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[   514.309] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970M (GM204-A) at PCI:1:0:0 (GPU-0)
[   514.309] (--) NVIDIA(0): Memory: 3145728 kBytes
[   514.309] (--) NVIDIA(0): VideoBIOS: 84.04.85.00.37
[   514.309] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   514.309] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   514.309] (**) NVIDIA(0):     device LGD (DFP-1) (Using EDID frequencies has been
[   514.309] (**) NVIDIA(0):     enabled on all display devices.)
[   514.309] (==) NVIDIA(0): 
[   514.309] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   514.309] (==) NVIDIA(0):     will be used as the requested mode.
[   514.309] (==) NVIDIA(0): 
[   514.310] (II) NVIDIA(0): Validated MetaModes:
[   514.310] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[   514.310] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[   514.312] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   514.312] (--) Depth 24 pixmap format is 32 bpp
[   514.312] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[   514.312] (II) NVIDIA:     access.
[   514.328] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[   515.366] (==) NVIDIA(0): Disabling shared memory pixmaps
[   515.366] (==) NVIDIA(0): Backing store enabled
[   515.366] (==) NVIDIA(0): Silken mouse enabled
[   515.366] (**) NVIDIA(0): DPMS enabled
[   515.366] (II) Loading sub module "dri2"
[   515.366] (II) LoadModule: "dri2"
[   515.366] (II) Module "dri2" already built-in
[   515.366] (II) NVIDIA(0): [DRI2] Setup complete
[   515.366] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   515.367] (--) RandR disabled
[   515.370] (II) AIGLX: Screen 0 is not DRI2 capable
[   515.370] (EE) AIGLX: reverting to software rendering
[   515.447] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   515.449] (II) AIGLX: Loaded and initialized swrast
[   515.449] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   515.529] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   515.529] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   515.530] (II) LoadModule: "evdev"
[   515.530] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   515.532] (II) Module evdev: vendor="X.Org Foundation"
[   515.532]    compiled for 1.18.0, module version = 2.10.1
[   515.532]    Module class: X.Org XInput Driver
[   515.532]    ABI class: X.Org XInput driver, version 22.1
[   515.533] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 26 paused 0
[   515.533] (II) Using input driver 'evdev' for 'Power Button'
[   515.533] (**) Power Button: always reports core events
[   515.533] (**) evdev: Power Button: Device: "/dev/input/event3"
[   515.533] (--) evdev: Power Button: Vendor 0 Product 0x1
[   515.533] (--) evdev: Power Button: Found keys
[   515.533] (II) evdev: Power Button: Configuring as keyboard
[   515.533] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   515.533] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   515.533] (**) Option "xkb_rules" "evdev"
[   515.534] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   515.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   515.536] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[   515.536] (II) Using input driver 'evdev' for 'Video Bus'
[   515.536] (**) Video Bus: always reports core events
[   515.536] (**) evdev: Video Bus: Device: "/dev/input/event4"
[   515.536] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   515.536] (--) evdev: Video Bus: Found keys
[   515.536] (II) evdev: Video Bus: Configuring as keyboard
[   515.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input4/event4"
[   515.536] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   515.536] (**) Option "xkb_rules" "evdev"
[   515.537] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   515.537] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   515.538] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[   515.538] (II) Using input driver 'evdev' for 'Power Button'
[   515.538] (**) Power Button: always reports core events
[   515.538] (**) evdev: Power Button: Device: "/dev/input/event0"
[   515.538] (--) evdev: Power Button: Vendor 0 Product 0x1
[   515.538] (--) evdev: Power Button: Found keys
[   515.538] (II) evdev: Power Button: Configuring as keyboard
[   515.538] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   515.538] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   515.538] (**) Option "xkb_rules" "evdev"
[   515.539] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   515.539] (II) No input driver specified, ignoring this device.
[   515.539] (II) This device may have been added with another device file.
[   515.540] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   515.540] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   515.541] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[   515.541] (II) Using input driver 'evdev' for 'Sleep Button'
[   515.541] (**) Sleep Button: always reports core events
[   515.541] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   515.541] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   515.541] (--) evdev: Sleep Button: Found keys
[   515.541] (II) evdev: Sleep Button: Configuring as keyboard
[   515.541] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   515.541] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   515.541] (**) Option "xkb_rules" "evdev"
[   515.542] (II) config/udev: Adding drm device (/dev/dri/card0)
[   515.542] (II) xfree86: Adding drm device (/dev/dri/card0)
[   515.543] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 30 paused 1
[   515.543] (EE) Error systemd-logind returned paused fd for drm node
[   515.543] (II) systemd-logind: releasing fd for 226:0
[   515.544] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[   515.544] (II) No input driver specified, ignoring this device.
[   515.544] (II) This device may have been added with another device file.
[   515.545] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[   515.545] (II) No input driver specified, ignoring this device.
[   515.545] (II) This device may have been added with another device file.
[   515.545] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[   515.545] (II) No input driver specified, ignoring this device.
[   515.545] (II) This device may have been added with another device file.
[   515.546] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[   515.546] (II) No input driver specified, ignoring this device.
[   515.546] (II) This device may have been added with another device file.
[   515.547] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event7)
[   515.547] (**) BisonCam, NB Pro: Applying InSection "Device" 
        Identifier "Device0"
        Driver  "nvidia"
        BusID          "PCI:1:0:0"
        Option "NoLogo" "true"
EndSection
putClass "evdev keyboard catchall"
[   515.548] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 31 paused 0
[   515.548] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[   515.548] (**) BisonCam, NB Pro: always reports core events
[   515.548] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event7"
[   515.548] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x66d
[   515.548] (--) evdev: BisonCam, NB Pro: Found keys
[   515.548] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[   515.548] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input13/event7"
[   515.548] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 10)
[   515.548] (**) Option "xkb_rules" "evdev"
[   515.549] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[   515.549] (II) No input driver specified, ignoring this device.
[   515.549] (II) This device may have been added with another device file.
[   515.550] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[   515.550] (II) No input driver specified, ignoring this device.
[   515.550] (II) This device may have been added with another device file.
[   515.550] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[   515.550] (II) No input driver specified, ignoring this device.
[   515.550] (II) This device may have been added with another device file.
[   515.551] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[   515.551] (II) No input driver specified, ignoring this device.
[   515.551] (II) This device may have been added with another device file.
[   515.551] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[   515.551] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   515.552] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[   515.552] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   515.552] (**) AT Translated Set 2 keyboard: always reports core events
[   515.552] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[   515.552] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   515.552] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   515.552] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   515.552] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[   515.552] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   515.552] (**) Option "xkb_rules" "evdev"
[   515.553] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[   515.553] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   515.553] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   515.553] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   515.553] (II) LoadModule: "synaptics"
[   515.553] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   515.554] (II) Module synaptics: vendor="X.Org Foundation"
[   515.554]    compiled for 1.18.0, module version = 1.8.3
[   515.554]    Module class: X.Org XInput Driver
[   515.554]    ABI class: X.Org XInput driver, version 22.1
[   515.555] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 33 paused 0
[   515.555] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   515.555] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   515.555] (**) Option "Device" "/dev/input/event16"
[   515.586] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1326 - 5654 (res 40)
[   515.586] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1228 - 4716 (res 59)
[   515.586] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   515.586] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   515.586] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   515.586] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   515.586] (**) Option "TapButton1" "1"
[   515.586] (**) Option "TapButton2" "2"
[   515.586] (**) Option "TapButton3" "3"
[   515.586] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   515.587] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   515.587] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event16"
[   515.587] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   515.587] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   515.587] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   515.587] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[   515.587] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   515.587] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   515.587] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   515.587] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   515.587] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   515.588] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   515.588] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   515.588] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   515.588] (II) No input driver specified, ignoring this device.
[   515.588] (II) This device may have been added with another device file.
[   515.593] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[   515.593] (II) config/udev: Adding drm device (/dev/dri/card0)
[   515.593] (II) xfree86: Adding drm device (/dev/dri/card0)
[   515.594] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 25 paused 1
[   515.594] (EE) Error systemd-logind returned paused fd for drm node
[   515.594] (II) systemd-logind: releasing fd for 226:0
[   515.595] (--) NVIDIA(GPU-0): LGD (DFP-1): connected
[   515.595] (--) NVIDIA(GPU-0): LGD (DFP-1): Internal DisplayPort
[   515.595] (--) NVIDIA(GPU-0): LGD (DFP-1): 960.0 MHz maximum pixel clock
[   515.595] (--) NVIDIA(GPU-0): 
[   516.509] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   516.509] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   516.509] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   516.509] (--) NVIDIA(GPU-0): 
[   516.509] (--) NVIDIA(GPU-0): LGD (DFP-1): connected
[   516.509] (--) NVIDIA(GPU-0): LGD (DFP-1): Internal DisplayPort
[   516.509] (--) NVIDIA(GPU-0): LGD (DFP-1): 960.0 MHz maximum pixel clock
[   516.509] (--) NVIDIA(GPU-0): 
[   516.509] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   516.509] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   516.509] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[   516.509] (--) NVIDIA(GPU-0): 
[   516.509] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   516.509] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   516.509] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[   516.509] (--) NVIDIA(GPU-0): 
[   516.509] (--) NVIDIA(GPU-0): DFP-4: disconnected
[   516.509] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[   516.509] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[   516.509] (--) NVIDIA(GPU-0): 
[   516.509] (--) NVIDIA(GPU-0): DFP-5: disconnected
[   516.509] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[   516.509] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[   516.509] (--) NVIDIA(GPU-0): 
[   516.654] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   516.654] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   516.654] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   516.654] (--) NVIDIA(GPU-0): 
[   516.655] (--) NVIDIA(GPU-0): LGD (DFP-1): connected
[   516.655] (--) NVIDIA(GPU-0): LGD (DFP-1): Internal DisplayPort
[   516.655] (--) NVIDIA(GPU-0): LGD (DFP-1): 960.0 MHz maximum pixel clock
[   516.655] (--) NVIDIA(GPU-0): 
[   516.655] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   516.655] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   516.655] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[   516.655] (--) NVIDIA(GPU-0): 
[   516.655] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   516.655] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   516.655] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[   516.655] (--) NVIDIA(GPU-0): 
[   516.655] (--) NVIDIA(GPU-0): DFP-4: disconnected
[   516.655] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[   516.655] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[   516.655] (--) NVIDIA(GPU-0): 
[   516.655] (--) NVIDIA(GPU-0): DFP-5: disconnected
[   516.655] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[   516.655] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[   516.655] (--) NVIDIA(GPU-0): 
[   684.571] (II) systemd-logind: got pause for 13:64
[   684.571] (II) systemd-logind: got pause for 13:69
[   684.571] (II) systemd-logind: got pause for 13:68
[   684.571] (II) systemd-logind: got pause for 13:65
[   684.571] (II) systemd-logind: got pause for 13:71
[   684.571] (II) systemd-logind: got pause for 13:67
[   684.571] (II) systemd-logind: got pause for 13:80
[   716.019] (II) config/udev: removing device BisonCam, NB Pro
[   716.019] (II) evdev: BisonCam, NB Pro: Close
[   716.019] (II) UnloadModule: "evdev"
[   716.019] (II) systemd-logind: releasing fd for 13:71
[   716.023] (EE) systemd-logind: failed to release device: Device not taken
[   720.453] (II) systemd-logind: got resume for 13:64
[   720.453] (II) Open ACPI successful (/var/run/acpid.socket)
[   720.468] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[   721.522] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   721.522] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   721.522] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   721.522] (--) NVIDIA(GPU-0): 
[   721.523] (--) NVIDIA(GPU-0): LGD (DFP-1): connected
[   721.523] (--) NVIDIA(GPU-0): LGD (DFP-1): Internal DisplayPort
[   721.523] (--) NVIDIA(GPU-0): LGD (DFP-1): 960.0 MHz maximum pixel clock
[   721.523] (--) NVIDIA(GPU-0): 
[   721.523] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   721.523] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   721.523] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[   721.523] (--) NVIDIA(GPU-0): 
[   721.523] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   721.523] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   721.523] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[   721.523] (--) NVIDIA(GPU-0): 
[   721.523] (--) NVIDIA(GPU-0): DFP-4: disconnected
[   721.523] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[   721.523] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[   721.523] (--) NVIDIA(GPU-0): 
[   721.523] (--) NVIDIA(GPU-0): DFP-5: disconnected
[   721.523] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[   721.523] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[   721.523] (--) NVIDIA(GPU-0): 
[   721.538] (II) systemd-logind: got resume for 13:69
[   721.538] (II) systemd-logind: got resume for 13:68
[   721.538] (II) systemd-logind: got resume for 13:65
[   721.538] (II) systemd-logind: got resume for 13:67
[   721.538] (II) systemd-logind: got resume for 13:80
[   721.538] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   737.431] (II) systemd-logind: got pause for 13:64
[   737.431] (II) systemd-logind: got pause for 13:69
[   737.431] (II) systemd-logind: got pause for 13:68
[   737.431] (II) systemd-logind: got pause for 13:65
[   737.431] (II) systemd-logind: got pause for 13:67
[   737.431] (II) systemd-logind: got pause for 13:80
[   749.393] (II) systemd-logind: got resume for 13:64
[   749.393] (II) Open ACPI successful (/var/run/acpid.socket)
[   749.413] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[   750.478] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   750.478] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   750.478] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   750.478] (--) NVIDIA(GPU-0): 
[   750.478] (--) NVIDIA(GPU-0): LGD (DFP-1): connected
[   750.478] (--) NVIDIA(GPU-0): LGD (DFP-1): Internal DisplayPort
[   750.478] (--) NVIDIA(GPU-0): LGD (DFP-1): 960.0 MHz maximum pixel clock
[   750.478] (--) NVIDIA(GPU-0): 
[   750.478] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   750.478] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   750.478] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[   750.478] (--) NVIDIA(GPU-0): 
[   750.478] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   750.478] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   750.478] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[   750.478] (--) NVIDIA(GPU-0): 
[   750.478] (--) NVIDIA(GPU-0): DFP-4: disconnected
[   750.478] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[   750.478] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[   750.478] (--) NVIDIA(GPU-0): 
[   750.478] (--) NVIDIA(GPU-0): DFP-5: disconnected
[   750.478] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[   750.478] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[   750.478] (--) NVIDIA(GPU-0): 
[   750.494] (II) systemd-logind: got resume for 13:69
[   750.494] (II) systemd-logind: got resume for 13:68
[   750.494] (II) systemd-logind: got resume for 13:65
[   750.494] (II) systemd-logind: got resume for 13:67
[   750.494] (II) systemd-logind: got resume for 13:80
[   750.494] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
10-nvidia.conf

Code : Tout sélectionner

Section "Device" 
        Identifier "Device0"
        Driver  "nvidia"
        BusID   "PCI:1:0:0"
        Option "NoLogo" "true"
EndSection
10-serverl.conf

Code : Tout sélectionner

Section "ServerLayout"
        Identifier "Layout0"
        Screen 0 "Screen0"
EndSection
20-module.conf

Code : Tout sélectionner

Section "Module"
        Load "extmod"
        Load "dbe"
        Load "type1"
        Load "freetype"
        Load "glx"
EndSection
30-mon.conf

Code : Tout sélectionner

Section "Monitor"
        Identifier "Monitor0"
        Option "UseEdidDpi" "false"
        HorizSync       28.0 - 33.0
        VertRefresh     43.0 - 72.0
        Option         "DPMS"

EndSection
40-screen.conf

Code : Tout sélectionner

Section "Screen"
        Identifier "Screen0"
        Device "Device0"
        Monitor "Monitor0"
        DefaultDepth 24
        SubSection "Display"
                Depth 24
        EndSubSection
EndSection

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : dim. 17 janv. 2016, 21:57
par benjarobin
Bonjour,
Alors la première chose est de supprimer toutes les configurations de Xorg (celle que tu as créé). Elle est normalement inutile
Puis de vérifier que tu as bien installé tout ce qui est nécessaire, quelle est la sortie de :

Code : Tout sélectionner

pacman -Qsq "nvidia|intel|nouveau|libgl"
grep -Erv "^ *$|^ *#" /etc/modprobe* /usr/lib/modprobe* /etc/modules-load* /usr/lib/modules-load* /etc/mkinitcpio.conf /etc/X11/xorg*

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : dim. 17 janv. 2016, 23:24
par hexaspray
Bonjour Benjarobin,

merci beaucoup pour ta réponse rapide.

Petite precision, le service bumblebeed n'est pas actif. Lorsque je supprime les fichiers de configuration, xorg ne se lance pas ...

Code : Tout sélectionner

# pacman -Qsq "nvidia|intel|nouveau|libgl"
acpi_call-git-dkms                                                                                                                   
bumblebee                                                                                                                            
intellij-idea-community-edition                                                                                                      
intellij-idea-libs                                                                                                                   
lib32-mesa                                                                                                                           
lib32-mesa-libgl                                                                                                                     
lib32-nvidia-utils                                                                                                                   
libvdpau                                                                                                                             
mesa                                                                                                                                 
mesa-libgl                                                                                                                           
nvidia                                                                                                                               
nvidia-utils                                                                                                                         
opencl-nvidia                                                                                                                        
xf86-video-intel

Code : Tout sélectionner

# grep -Ev "^ *$|^ *#" /etc/modprobe* /usr/lib/modprobe* /etc/modules-load* /usr/lib/modules-load* /etc/mkinitcpio.conf /etc/X11/xorg*
grep: /etc/modprobe.d: Is a directory
grep: /usr/lib/modprobe.d: Is a directory
grep: /etc/modules-load.d: Is a directory
grep: /usr/lib/modules-load.d: Is a directory
/etc/mkinitcpio.conf:MODULES="nouveau"
/etc/mkinitcpio.conf:BINARIES=""
/etc/mkinitcpio.conf:FILES=""
/etc/mkinitcpio.conf:HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
grep: /etc/X11/xorg.conf.d: Is a directory

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 00:29
par benjarobin
Tu n'as pas installé les paquet libgl de NVIDIA. Tu devrais désinstaller bumblebee ainsi que le driver Intel.
acpi_call-git-dkms ne devrait pas être installé, même dans le cas avec la carte Intel, il faut privilégier son successeur bbswitch

Sinon désolé j'ai fait une erreur dans les commandes, une fois les paquets manquant installés, et ceux en trop supprimés, relance les commandes corrigées dans mon message précédent.

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 11:29
par hexaspray
Bonjour,

J'ai supprimé les fichiers de configuration, les packets en trop et installé les libgl de nvidia :

En installant nvidia-libgl, j'ai eu le droit a un conflit de packet mesa-libgl.
De même avec lib32-nvidia-libgl et lib32-mesa-libgl.

Incroyable ! Glx fonctionne ! Il est bien initialisé !! Merci beaucoup :D
En revanche les terminaux virtuels ont encore un peu de mal, j'ai toujours le droit à mes blackscreens, SAUF ! si je ferme/ouvre le clapot de mon ordinateur . Une idée de ce qui pourrait clocher ?

Voilà la sortie des commandes :

Code : Tout sélectionner

$ pacman -Qsq "nvidia|intel|nouveau|libgl"
intellij-idea-community-edition
intellij-idea-libs
lib32-mesa
lib32-nvidia-libgl
lib32-nvidia-utils
libvdpau
mesa
nvidia
nvidia-libgl
nvidia-utils
opencl-nvidia

$ grep -Erv "^ *$|^ *#" /etc/modprobe* /usr/lib/modprobe* /etc/modules-load* /usr/lib/modules-load* /etc/mkinitcpio.conf /etc/X11/xorg*
/etc/modprobe.d/blacklist.conf:install i915 /usr/bin/false
/etc/modprobe.d/blacklist.conf:install intel_agp /usr/bin/false
/usr/lib/modprobe.d/nvidia.conf:blacklist nouveau
/usr/lib/modprobe.d/usb-load-ehci-first.conf:softdep ohci_hcd pre: ehci_hcd
/usr/lib/modprobe.d/usb-load-ehci-first.conf:softdep uhci_hcd pre: ehci_hcd
/usr/lib/modprobe.d/bluetooth-usb.conf:options btusb reset=1
/usr/lib/modules-load.d/acpi_call.conf:acpi_call
/etc/mkinitcpio.conf:MODULES="nouveau"
/etc/mkinitcpio.conf:BINARIES=""
/etc/mkinitcpio.conf:FILES=""
/etc/mkinitcpio.conf:HOOKS="base udev autodetect modconf block filesystems keyboard fsck"

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 12:10
par benjarobin
Tu devrait supprimer /etc/modprobe.d/blacklist.conf, ce fichier est inutile et te posera plus de souci qu'autre chose si tu veux rebasculer sur la carte intel.
C'est quel paquet qui as installé /usr/lib/modules-load.d/acpi_call.conf ? Il ne devrait pas être présent :

Code : Tout sélectionner

pacman -Qo /usr/lib/modules-load.d/acpi_call.conf
Si ce fichier n'appartient à aucun paquet, alors tu dois le supprimer.

Il te faut aussi supprimer nouveau des MODULES de /etc/mkinitcpio.conf puis relancer

Code : Tout sélectionner

mkinitcpio -p linux
Bien sûr cette commande est à adapter si tu n'utilise pas le kernel par défaut de Arch Linux (par exemple le lts ou un autre kernel)

Au vu du "bordel" qu'il y avait sur ton système, cela ne risquait pas de fonctionner avec la carte intel.

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 14:21
par hexaspray
Hahaha en effet c’était/c'est un gros bordel !

Le fichier acpi_call.conf venait en fait un autre paquet acpi_call.
Je l'ai supprimé, le fichier n'existe plus et j'ai relancer la commande :

Code : Tout sélectionner

mkinitcpio -p linux
Mais les blackscreens des terminaux virtuels sont toujours présents.

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 20:46
par benjarobin
Tu démarres avec quiet ou pas ? Peux tu tester sans quiet et dis nous si tu vois les messages de boot (du genre: [ ok ] ....)
Quel est ton gestionnaire de démarrage ? Quelle est la résolution native de ton écran ?

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 21:46
par GuilouV
As-tu ajouté une/des options aux paramètres du kernel dans ton boot loader (Grub par exemple)?
L'option nomodeset peut engendrer le genre de souci que tu décris.

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 22:09
par benjarobin
Au contraire, l'utilisation de driver propriétaire implique l'option nomodeset (enfin il y a quelques mois, apparemment il y a un nouveau module chargé : nvidia_modeset)
Mais oui donne nous la ligne des paramètres kernel, cela pourrait aider

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 22:28
par hexaspray
Alors, j’utilise grub sans quiet ou autres options.
Résolution native ? Je ne suis pas sur de comprendre, ma résolution d’écran est de 1920x1080.

Si je peux vous donner plus de détails, lorsque j'essaye de changer de tty, j'ai l'impression que mon écran s’éteint, puis se rallume. Une sorte de clignotement noir pendant une bonne seconde ..,
Je suis donc obligé de fermer/ouvrir le clapot pour voir le prompt.

voilà le fichier :

Code : Tout sélectionner

$ cat /etc/default/grub 
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter 
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx" 
#GRUB_DISABLE_LINUX_UUID=true
                                                                                                                                                                                                                  
# Uncomment to disable generation of recovery mode menu entries                                                                                                                                                   
GRUB_DISABLE_RECOVERY=true                                                                                                                                                                                        
                                                                                                                                                                                                                  
# Uncomment and set to the desired menu colors.  Used by normal and wallpaper                                                                                                                                     
# modes only.  Entries specified as foreground/background.                                                                                                                                                        
#GRUB_COLOR_NORMAL="light-blue/black"                                                                                                                                                                             
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"                                                                                                                                                                           
                                                                                                                                                                                                                  
# Uncomment one of them for the gfx desired, a image background or a gfxtheme                                                                                                                                     
#GRUB_BACKGROUND="/path/to/wallpaper"                                                                                                                                                                             
#GRUB_THEME="/path/to/gfxtheme"                                                                                                                                                                                   
                                                                                                                                                                                                                  
# Uncomment to get a beep at GRUB start                                                                                                                                                                           
#GRUB_INIT_TUNE="480 440 1"                                                                                                                                                                                       
                                                                                                                                                                                                                  
#GRUB_SAVEDEFAULT="true"
Encore merci pour votre soutien ! :)

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 22:51
par benjarobin
Tu n'as pas répondu à ma question, vois tu les messages de boot ?

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : lun. 18 janv. 2016, 22:59
par hexaspray
Excuse-moi, oui je vois les messages au boot.

Re: [xorg] Impossible d'initialiser le module Glx + Impossible de changer de terminal virtuel

Publié : jeu. 21 janv. 2016, 11:45
par hexaspray
Du coup merci beaucoup pour ton aide benjarobin et bravo pour ton activité sur le forum :).
Je vais essayer de trouver une solution, je posterai la démarche si je trouve.

Bonne journée.
Fuseau horaire sur UTC+02:00
Page 1 sur 1

Développé par phpBB® Forum Software © phpBB Limited

Traduction française officielle © Qiaeru