[nvidia] écran noir après mise à jour (résolu)
[nvidia] écran noir après mise à jour (résolu)
Bonjour,
Je viens d'effectuer une mise-à-jour du système après 5 semaines d'absence. Je redémarre et bim! écran noir…
Je récupère un mode console en faisant ctrl+alt+F2.
Je pense que le système est correctement lancé mais que la configuration du serveur x (ou du pilote) n'est pas bonne (genre mauvaise résolution).
Ma carte graphique Nvidia GeForce GT 710
Mon pilote : nvidia-470xx (version 470.182.03-02), mis à jour à partir de aur juste après la mise à jour du noyau
Je ne me souviens plus comment on fait pour partager un fichier log en mode console…
Merci par avance pour votre aide !
Denis
Je viens d'effectuer une mise-à-jour du système après 5 semaines d'absence. Je redémarre et bim! écran noir…
Je récupère un mode console en faisant ctrl+alt+F2.
Je pense que le système est correctement lancé mais que la configuration du serveur x (ou du pilote) n'est pas bonne (genre mauvaise résolution).
Ma carte graphique Nvidia GeForce GT 710
Mon pilote : nvidia-470xx (version 470.182.03-02), mis à jour à partir de aur juste après la mise à jour du noyau
Je ne me souviens plus comment on fait pour partager un fichier log en mode console…
Merci par avance pour votre aide !
Denis
Dernière modification par draffin le lun. 15 mai 2023, 07:54, modifié 1 fois.
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
Bonjour,
Peux tu donner les sorties suivantes (il suffit de tout rediriger vers un fichier puis de nous partager ce fichier texte) :
Pour l'envoi du fichier texte voir https://wiki.archlinux.org/title/List_o ... n_services, par exemple
Peux tu donner les sorties suivantes (il suffit de tout rediriger vers un fichier puis de nous partager ce fichier texte) :
Code : Tout sélectionner
pacman -Qs nvidia
uname -a
pacman -Q linux linux-headers linux-lts linux-lts-headers
grep -Pvr "^ *#|^ *$" /etc/mkinitcpio.conf /etc/X11/xorg.conf* /etc/fstab /etc/modprobe* /usr/lib/modprobe* /etc/modules-load* /usr/lib/modules-load*
sudo blkid
cat /var/log/Xorg.0.log
lsmod | grep -E "nvidia|nouveau"
modinfo nvidia | head -5
Code : Tout sélectionner
curl -F 'file=@-' 0x0.st < file
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [nvidia] écran noir après mise à jour
pacman -Qs nvidia
uname -a
pacman -Q linux linux-headers linux-lts linux-lts-headers
grep -Pvr "^ *#|^ *$" /etc/mkinitcpio.conf /etc/X11/xorg.conf* /etc/fstab /etc/modprobe* /usr/lib/modprobe* /etc/modules-load* /usr/lib/modules-load*
sudo blkid
cat /var/log/Xorg.0.log
lsmod
Code : Tout sélectionner
local/egl-wayland 2:1.1.11-4
EGLStream-based Wayland external platform
local/lib32-nvidia-470xx-utils 470.182.03-1
NVIDIA drivers utilities (32-bit)
local/libvdpau 1.5-1
Nvidia VDPAU library
local/libxnvctrl-470xx 470.182.03-1
NVIDIA NV-CONTROL X extension
local/nvidia-470xx-dkms 470.182.03-2
NVIDIA drivers - module sources
local/nvidia-470xx-settings 470.182.03-1
Tool for configuring the NVIDIA graphics driver
local/nvidia-470xx-utils 470.182.03-2
NVIDIA drivers utilities
Code : Tout sélectionner
Linux dauphin 6.3.1-arch2-1 #1 SMP PREEMPT_DYNAMIC Wed, 10 May 2023 08:54:47 +0000 x86_64 GNU/Linux
Code : Tout sélectionner
linux 6.3.1.arch2-1
linux-headers 6.3.1.arch2-1
Code : Tout sélectionner
/etc/mkinitcpio.conf:MODULES=""
/etc/mkinitcpio.conf:BINARIES=""
/etc/mkinitcpio.conf:FILES="/etc/modprobe.d/modprobe.conf"
/etc/mkinitcpio.conf:HOOKS="base udev autodetect block filesystems"
/etc/mkinitcpio.conf:HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
/etc/X11/xorg.conf:Section "ServerLayout"
/etc/X11/xorg.conf: Identifier "Layout0"
/etc/X11/xorg.conf: Screen 0 "Screen0" 0 0
/etc/X11/xorg.conf: InputDevice "Keyboard0" "CoreKeyboard"
/etc/X11/xorg.conf: InputDevice "Mouse0" "CorePointer"
/etc/X11/xorg.conf: Option "Xinerama" "0"
/etc/X11/xorg.conf:EndSection
/etc/X11/xorg.conf:Section "Files"
/etc/X11/xorg.conf:EndSection
/etc/X11/xorg.conf:Section "InputDevice"
/etc/X11/xorg.conf: Identifier "Mouse0"
/etc/X11/xorg.conf: Driver "mouse"
/etc/X11/xorg.conf: Option "Protocol" "auto"
/etc/X11/xorg.conf: Option "Device" "/dev/psaux"
/etc/X11/xorg.conf: Option "Emulate3Buttons" "no"
/etc/X11/xorg.conf: Option "ZAxisMapping" "4 5"
/etc/X11/xorg.conf:EndSection
/etc/X11/xorg.conf:Section "InputDevice"
/etc/X11/xorg.conf: Identifier "Keyboard0"
/etc/X11/xorg.conf: Driver "kbd"
/etc/X11/xorg.conf:EndSection
/etc/X11/xorg.conf:Section "Monitor"
/etc/X11/xorg.conf: Identifier "Monitor0"
/etc/X11/xorg.conf: VendorName "Unknown"
/etc/X11/xorg.conf: ModelName "Acer V196HQL"
/etc/X11/xorg.conf: HorizSync 31.0 - 83.0
/etc/X11/xorg.conf: VertRefresh 56.0 - 76.0
/etc/X11/xorg.conf: Option "PreferredMode" "1366x768"
/etc/X11/xorg.conf: Option "DPMS"
/etc/X11/xorg.conf:EndSection
/etc/X11/xorg.conf:Section "Device"
/etc/X11/xorg.conf: Identifier "Device0"
/etc/X11/xorg.conf: Driver "nvidia"
/etc/X11/xorg.conf: VendorName "NVIDIA Corporation"
/etc/X11/xorg.conf: BoardName "GeForce GT 710"
/etc/X11/xorg.conf:EndSection
/etc/X11/xorg.conf:Section "Screen"
/etc/X11/xorg.conf: Identifier "Screen0"
/etc/X11/xorg.conf: Device "Device0"
/etc/X11/xorg.conf: Monitor "Monitor0"
/etc/X11/xorg.conf: DefaultDepth 24
/etc/X11/xorg.conf: Option "Stereo" "0"
/etc/X11/xorg.conf: Option "nvidiaXineramaInfoOrder" "CRT-0"
/etc/X11/xorg.conf: Option "metamodes" "VGA-0: nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
/etc/X11/xorg.conf: Option "SLI" "Off"
/etc/X11/xorg.conf: Option "MultiGPU" "Off"
/etc/X11/xorg.conf: Option "BaseMosaic" "off"
/etc/X11/xorg.conf: SubSection "Display"
/etc/X11/xorg.conf: Modes "1366x768"
/etc/X11/xorg.conf: Depth 24
/etc/X11/xorg.conf: EndSubSection
/etc/X11/xorg.conf:EndSection
/etc/X11/xorg.conf.backup:Section "ServerLayout"
/etc/X11/xorg.conf.backup: Identifier "Layout0"
/etc/X11/xorg.conf.backup: Screen 0 "Screen0" 0 0
/etc/X11/xorg.conf.backup: InputDevice "Keyboard0" "CoreKeyboard"
/etc/X11/xorg.conf.backup: InputDevice "Mouse0" "CorePointer"
/etc/X11/xorg.conf.backup: Option "Xinerama" "0"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Files"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "InputDevice"
/etc/X11/xorg.conf.backup: Identifier "Mouse0"
/etc/X11/xorg.conf.backup: Driver "mouse"
/etc/X11/xorg.conf.backup: Option "Protocol" "auto"
/etc/X11/xorg.conf.backup: Option "Device" "/dev/psaux"
/etc/X11/xorg.conf.backup: Option "Emulate3Buttons" "no"
/etc/X11/xorg.conf.backup: Option "ZAxisMapping" "4 5"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "InputDevice"
/etc/X11/xorg.conf.backup: Identifier "Keyboard0"
/etc/X11/xorg.conf.backup: Driver "kbd"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Monitor"
/etc/X11/xorg.conf.backup: Identifier "Monitor0"
/etc/X11/xorg.conf.backup: VendorName "Unknown"
/etc/X11/xorg.conf.backup: ModelName "Acer V196HQL"
/etc/X11/xorg.conf.backup: HorizSync 31.0 - 83.0
/etc/X11/xorg.conf.backup: VertRefresh 56.0 - 76.0
/etc/X11/xorg.conf.backup: Option "DPMS"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Device"
/etc/X11/xorg.conf.backup: Identifier "Device0"
/etc/X11/xorg.conf.backup: Driver "nvidia"
/etc/X11/xorg.conf.backup: VendorName "NVIDIA Corporation"
/etc/X11/xorg.conf.backup: BoardName "GeForce GT 710"
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.backup:Section "Screen"
/etc/X11/xorg.conf.backup: Identifier "Screen0"
/etc/X11/xorg.conf.backup: Device "Device0"
/etc/X11/xorg.conf.backup: Monitor "Monitor0"
/etc/X11/xorg.conf.backup: DefaultDepth 24
/etc/X11/xorg.conf.backup: Option "Stereo" "0"
/etc/X11/xorg.conf.backup: Option "nvidiaXineramaInfoOrder" "CRT-0"
/etc/X11/xorg.conf.backup: Option "metamodes" "VGA-0: nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
/etc/X11/xorg.conf.backup: Option "SLI" "Off"
/etc/X11/xorg.conf.backup: Option "MultiGPU" "Off"
/etc/X11/xorg.conf.backup: Option "BaseMosaic" "off"
/etc/X11/xorg.conf.backup: SubSection "Display"
/etc/X11/xorg.conf.backup: Depth 24
/etc/X11/xorg.conf.backup: EndSubSection
/etc/X11/xorg.conf.backup:EndSection
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:Section "InputClass"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: Identifier "Keyboard Layout"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: MatchIsKeyboard "yes"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: MatchDevicePath "/dev/input/event*"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: Option "XkbLayout" "fr"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf: Option "XkbVariant" "bepo"
/etc/X11/xorg.conf.d/10-keyboard-layout.conf:EndSection
/etc/fstab:UUID=e2fabdf7-17df-43c5-9b6d-f3cabf13ecd4 / ext4 defaults,noatime,discard 0 1
/etc/fstab:UUID=a0fc9be1-f23e-4987-8a93-3c1d4adaadc3 /home ext4 defaults,noatime,discard 0 2
/etc/fstab:UUID=20aac41b-1a29-43bb-bb8c-fb6f49e81a37 none swap defaults 0 0
/etc/fstab:/dev/sda1 /trucs ext4 defaults 0 0
/etc/fstab:/dev/sdc1 /trucs3 btrfs defaults 0 0
/etc/modprobe.d/modprobe.conf:alias net-pf-10 off
/usr/lib/modprobe.d/nvidia-470xx-utils.conf:blacklist nouveau
/usr/lib/modprobe.d/nvdimm-security.conf:install libnvdimm /usr/bin/ndctl load-keys ; /sbin/modprobe --ignore-install libnvdimm $CMDLINE_OPTS
/usr/lib/modprobe.d/systemd.conf:options bonding max_bonds=0
/usr/lib/modprobe.d/systemd.conf:options dummy numdummies=0
/usr/lib/modprobe.d/README:Files in this directory contain configuration for modprobe, a program to load
/usr/lib/modprobe.d/README:kernel modules.
/usr/lib/modprobe.d/README:See man:modprobe.d(5) for explanation of the configuration file format, and
/usr/lib/modprobe.d/README:man:modprobe(8) for a description of the program itself.
/usr/lib/modprobe.d/README:Use 'systemd-analyze cat-config modprobe.d' to display the effective config.
/usr/lib/modprobe.d/bluetooth-usb.conf:options btusb reset=1
/usr/lib/modules-load.d/cdrecord.conf:sg
/usr/lib/modules-load.d/nvidia-470xx-utils.conf:nvidia-uvm
/usr/lib/modules-load.d/bluez.conf:crypto_user
Code : Tout sélectionner
/dev/sdb2: UUID="20aac41b-1a29-43bb-bb8c-fb6f49e81a37" TYPE="swap" PARTUUID="812b830e-02"
/dev/sdb3: UUID="a0fc9be1-f23e-4987-8a93-3c1d4adaadc3" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="812b830e-03"
/dev/sdb1: UUID="e2fabdf7-17df-43c5-9b6d-f3cabf13ecd4" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="812b830e-01"
/dev/sdc1: LABEL="trucs3" UUID="cb269bc5-1540-4670-a589-0ae44cece922" UUID_SUB="fe7e885b-0ba9-4986-8a35-d7210602211a" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="71661bb2-01"
/dev/sda1: UUID="687766d1-57c8-48dd-9ca1-c7ba97b98313" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="458d594f-01"
Code : Tout sélectionner
[ 4.701] (--) Log file renamed from "/var/log/Xorg.pid-479.log" to "/var/log/Xorg.0.log"
[ 4.709]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 4.709] Current Operating System: Linux dauphin 6.3.1-arch2-1 #1 SMP PREEMPT_DYNAMIC Wed, 10 May 2023 08:54:47 +0000 x86_64
[ 4.709] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb1 rw initrd=../initramfs-linux.img
[ 4.709]
[ 4.709] Current version of pixman: 0.42.2
[ 4.709] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.709] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.709] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 14 18:25:37 2023
[ 4.719] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.719] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.719] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.723] (==) ServerLayout "Layout0"
[ 4.723] (**) |-->Screen "Screen0" (0)
[ 4.723] (**) | |-->Monitor "Monitor0"
[ 4.724] (**) | |-->Device "Device0"
[ 4.724] (**) |-->Input Device "Keyboard0"
[ 4.724] (**) |-->Input Device "Mouse0"
[ 4.724] (**) Option "Xinerama" "0"
[ 4.724] (==) Automatically adding devices
[ 4.724] (==) Automatically enabling devices
[ 4.724] (==) Automatically adding GPU devices
[ 4.724] (==) Automatically binding GPU devices
[ 4.724] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.731] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 4.731] Entry deleted from font path.
[ 4.731] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 4.731] Entry deleted from font path.
[ 4.731] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 4.731] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.731] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 4.731] (WW) Disabling Keyboard0
[ 4.731] (WW) Disabling Mouse0
[ 4.731] (II) Module ABI versions:
[ 4.731] X.Org ANSI C Emulation: 0.4
[ 4.731] X.Org Video Driver: 25.2
[ 4.731] X.Org XInput driver : 24.4
[ 4.731] X.Org Server Extension : 10.0
[ 4.734] (++) using VT number 1
[ 4.734] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.735] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.735] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 4.735] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.735] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 4.736] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 4.737] (--) PCI: (0@0:2:0) 8086:0102:8086:200d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4.737] (--) PCI:*(1@0:0:0) 10de:128b:1043:85e7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 4.737] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.737] (II) LoadModule: "glx"
[ 4.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.760] (II) Module glx: vendor="X.Org Foundation"
[ 4.760] compiled for 1.21.1.8, module version = 1.0.0
[ 4.760] ABI class: X.Org Server Extension, version 10.0
[ 4.760] (II) LoadModule: "nvidia"
[ 4.761] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.774] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.774] compiled for 1.6.99.901, module version = 1.0.0
[ 4.774] Module class: X.Org Video Driver
[ 4.775] (II) NVIDIA dlloader X Driver 470.182.03 Fri Feb 24 03:24:48 UTC 2023
[ 4.775] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.778] (II) Loading sub module "fb"
[ 4.778] (II) LoadModule: "fb"
[ 4.778] (II) Module "fb" already built-in
[ 4.778] (II) Loading sub module "wfb"
[ 4.778] (II) LoadModule: "wfb"
[ 4.779] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.780] (II) Module wfb: vendor="X.Org Foundation"
[ 4.780] compiled for 1.21.1.8, module version = 1.0.0
[ 4.780] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.780] (II) Loading sub module "ramdac"
[ 4.780] (II) LoadModule: "ramdac"
[ 4.780] (II) Module "ramdac" already built-in
[ 4.782] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 4.782] (==) NVIDIA(0): RGB weight 888
[ 4.782] (==) NVIDIA(0): Default visual is TrueColor
[ 4.782] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.782] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 4.782] (**) NVIDIA(0): Option "Stereo" "0"
[ 4.782] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-0"
[ 4.782] (**) NVIDIA(0): Option "SLI" "Off"
[ 4.782] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 4.782] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 4.782] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 4.782] (**) NVIDIA(0): Stereo disabled by request
[ 4.782] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 4.782] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 4.782] (**) NVIDIA(0): Option "MetaModes" "VGA-0: nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
[ 4.782] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.782] (II) Loading sub module "glxserver_nvidia"
[ 4.782] (II) LoadModule: "glxserver_nvidia"
[ 4.782] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 4.877] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 4.877] compiled for 1.6.99.901, module version = 1.0.0
[ 4.877] Module class: X.Org Server Extension
[ 4.877] (II) NVIDIA GLX Module 470.182.03 Fri Feb 24 03:21:43 UTC 2023
[ 4.887] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 5.540] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 5.540] (--) NVIDIA(0): CRT-0
[ 5.540] (--) NVIDIA(0): DFP-0 (boot)
[ 5.540] (--) NVIDIA(0): DFP-1
[ 5.540] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GT 710 (GK208) at PCI:1:0:0 (GPU-0)
[ 5.540] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 5.540] (--) NVIDIA(0): VideoBIOS: 80.28.b8.00.05
[ 5.541] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 5.541] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 5.541] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 5.541] (--) NVIDIA(GPU-0):
[ 5.541] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 5.541] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 5.541] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 5.541] (--) NVIDIA(GPU-0):
[ 5.542] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 5.542] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 5.542] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 5.542] (--) NVIDIA(GPU-0):
[ 5.542] (WW) NVIDIA(0): No valid modes for
[ 5.542] (WW) NVIDIA(0): "VGA-0:nvidia-auto-select+0+0{ForceCompositionPipeline=On,ForceFullCompositionPipeline=On}";
[ 5.542] (WW) NVIDIA(0): removing.
[ 5.542] (WW) NVIDIA(0):
[ 5.542] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 5.542] (WW) NVIDIA(0): "nvidia-auto-select".
[ 5.542] (WW) NVIDIA(0):
[ 5.542] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 5.542] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 5.542] (II) NVIDIA(0): Validated MetaModes:
[ 5.542] (II) NVIDIA(0): "NULL"
[ 5.542] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 5.542] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 5.542] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 5.542] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[ 5.542] (II) NVIDIA: access.
[ 5.544] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 5.544] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 5.544] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 5.544] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 5.544] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 5.544] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 5.544] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 5.544] (II) NVIDIA(0): Config Options in the README.
[ 5.565] (II) NVIDIA(0): Setting mode "NULL"
[ 5.605] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 5.605] (==) NVIDIA(0): Backing store enabled
[ 5.605] (==) NVIDIA(0): Silken mouse enabled
[ 5.605] (**) NVIDIA(0): DPMS enabled
[ 5.605] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 5.605] (II) Loading sub module "dri2"
[ 5.605] (II) LoadModule: "dri2"
[ 5.605] (II) Module "dri2" already built-in
[ 5.605] (II) NVIDIA(0): [DRI2] Setup complete
[ 5.605] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 5.605] (II) Initializing extension Generic Event Extension
[ 5.606] (II) Initializing extension SHAPE
[ 5.606] (II) Initializing extension MIT-SHM
[ 5.606] (II) Initializing extension XInputExtension
[ 5.606] (II) Initializing extension XTEST
[ 5.606] (II) Initializing extension BIG-REQUESTS
[ 5.606] (II) Initializing extension SYNC
[ 5.606] (II) Initializing extension XKEYBOARD
[ 5.606] (II) Initializing extension XC-MISC
[ 5.606] (II) Initializing extension SECURITY
[ 5.606] (II) Initializing extension XFIXES
[ 5.606] (II) Initializing extension RENDER
[ 5.607] (II) Initializing extension RANDR
[ 5.607] (II) Initializing extension COMPOSITE
[ 5.607] (II) Initializing extension DAMAGE
[ 5.607] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.607] (II) Initializing extension DOUBLE-BUFFER
[ 5.607] (II) Initializing extension RECORD
[ 5.607] (II) Initializing extension DPMS
[ 5.607] (II) Initializing extension Present
[ 5.607] (II) Initializing extension DRI3
[ 5.607] (II) Initializing extension X-Resource
[ 5.607] (II) Initializing extension XVideo
[ 5.608] (II) Initializing extension XVideo-MotionCompensation
[ 5.608] (II) Initializing extension GLX
[ 5.608] (II) Initializing extension GLX
[ 5.608] (II) Indirect GLX disabled.
[ 5.608] (II) GLX: Another vendor is already registered for screen 0
[ 5.608] (II) Initializing extension XFree86-VidModeExtension
[ 5.608] (II) Initializing extension XFree86-DGA
[ 5.608] (II) Initializing extension XFree86-DRI
[ 5.608] (II) Initializing extension DRI2
[ 5.608] (II) Initializing extension NV-GLX
[ 5.608] (II) Initializing extension NV-CONTROL
[ 5.692] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.692] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.692] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.692] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 5.692] (II) LoadModule: "libinput"
[ 5.692] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.698] (II) Module libinput: vendor="X.Org Foundation"
[ 5.698] compiled for 1.21.1.8, module version = 1.3.0
[ 5.698] Module class: X.Org XInput Driver
[ 5.698] ABI class: X.Org XInput driver, version 24.4
[ 5.698] (II) Using input driver 'libinput' for 'Power Button'
[ 5.698] (**) Power Button: always reports core events
[ 5.698] (**) Option "Device" "/dev/input/event1"
[ 5.706] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.706] (II) event1 - Power Button: device is a keyboard
[ 5.707] (II) event1 - Power Button: device removed
[ 5.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.730] (**) Option "xkb_layout" "fr"
[ 5.730] (**) Option "xkb_variant" "bepo"
[ 5.749] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.749] (II) event1 - Power Button: device is a keyboard
[ 5.750] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.750] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.750] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.750] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 5.750] (II) Using input driver 'libinput' for 'Power Button'
[ 5.750] (**) Power Button: always reports core events
[ 5.750] (**) Option "Device" "/dev/input/event0"
[ 5.751] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5.751] (II) event0 - Power Button: device is a keyboard
[ 5.751] (II) event0 - Power Button: device removed
[ 5.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5.793] (**) Option "xkb_layout" "fr"
[ 5.793] (**) Option "xkb_variant" "bepo"
[ 5.794] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5.794] (II) event0 - Power Button: device is a keyboard
[ 5.795] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[ 5.795] (II) No input driver specified, ignoring this device.
[ 5.795] (II) This device may have been added with another device file.
[ 5.796] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 5.796] (II) No input driver specified, ignoring this device.
[ 5.796] (II) This device may have been added with another device file.
[ 5.796] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[ 5.796] (II) No input driver specified, ignoring this device.
[ 5.796] (II) This device may have been added with another device file.
[ 5.797] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[ 5.797] (II) No input driver specified, ignoring this device.
[ 5.797] (II) This device may have been added with another device file.
[ 5.799] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event2)
[ 5.799] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.799] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.799] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "Keyboard Layout"
[ 5.799] (II) Using input driver 'libinput' for 'CHICONY HP Basic USB Keyboard'
[ 5.799] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 5.799] (**) Option "Device" "/dev/input/event2"
[ 5.801] (II) event2 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 5.801] (II) event2 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 5.801] (II) event2 - CHICONY HP Basic USB Keyboard: device removed
[ 5.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:03F0:0024.0001/input/input2/event2"
[ 5.836] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 8)
[ 5.836] (**) Option "xkb_layout" "fr"
[ 5.836] (**) Option "xkb_variant" "bepo"
[ 5.839] (II) event2 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 5.839] (II) event2 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 5.840] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 5.840] (II) No input driver specified, ignoring this device.
[ 5.840] (II) This device may have been added with another device file.
[ 5.840] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 5.840] (II) No input driver specified, ignoring this device.
[ 5.840] (II) This device may have been added with another device file.
[ 5.841] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 5.841] (II) No input driver specified, ignoring this device.
[ 5.841] (II) This device may have been added with another device file.
[ 5.841] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event13)
[ 5.841] (II) No input driver specified, ignoring this device.
[ 5.841] (II) This device may have been added with another device file.
[ 5.842] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 5.842] (II) No input driver specified, ignoring this device.
[ 5.842] (II) This device may have been added with another device file.
[ 5.843] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event3)
[ 5.843] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 5.843] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[ 5.843] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'
[ 5.843] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[ 5.843] (**) Option "Device" "/dev/input/event3"
[ 5.902] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 5.902] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 5.902] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device removed
[ 5.936] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.936] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.936] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:062A:4102.0002/input/input3/event3"
[ 5.936] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 9)
[ 5.937] (**) Option "AccelerationScheme" "none"
[ 5.937] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0
[ 5.937] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[ 5.937] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[ 5.995] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 5.995] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 5.997] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)
[ 5.997] (II) No input driver specified, ignoring this device.
[ 5.997] (II) This device may have been added with another device file.
[ 5.999] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event4)
[ 5.999] (II) No input driver specified, ignoring this device.
[ 5.999] (II) This device may have been added with another device file.
[ 5.999] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 5.999] (II) No input driver specified, ignoring this device.
[ 5.999] (II) This device may have been added with another device file.
[ 8.320] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 8.320] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 8.320] (--) NVIDIA(GPU-0):
[ 8.320] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 8.320] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 8.320] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 8.320] (--) NVIDIA(GPU-0):
[ 8.320] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 8.320] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 8.320] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 8.320] (--) NVIDIA(GPU-0):
[ 9.206] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 9.206] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 9.206] (--) NVIDIA(GPU-0):
[ 9.206] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 9.206] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 9.206] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 9.206] (--) NVIDIA(GPU-0):
[ 9.206] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 9.206] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 9.206] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 9.206] (--) NVIDIA(GPU-0):
[ 27.765] (II) event1 - Power Button: device removed
[ 27.776] (II) event0 - Power Button: device removed
[ 27.793] (II) event2 - CHICONY HP Basic USB Keyboard: device removed
[ 27.806] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device removed
Code : Tout sélectionner
Module Size Used by
snd_seq_dummy 16384 0
snd_seq 106496 1 snd_seq_dummy
snd_seq_device 16384 1 snd_seq
snd_hda_codec_realtek 196608 1
intel_rapl_msr 20480 0
snd_hda_codec_generic 114688 1 snd_hda_codec_realtek
intel_rapl_common 36864 1 intel_rapl_msr
ledtrig_audio 16384 1 snd_hda_codec_generic
x86_pkg_temp_thermal 20480 0
intel_powerclamp 16384 0
nvidia_drm 77824 16
coretemp 20480 0
nvidia_modeset 1511424 32 nvidia_drm
kvm_intel 458752 0
i915 3837952 1
snd_hda_codec_hdmi 94208 1
snd_hda_intel 65536 3
kvm 1327104 1 kvm_intel
snd_intel_dspcfg 36864 1 snd_hda_intel
snd_intel_sdw_acpi 20480 1 snd_intel_dspcfg
irqbypass 16384 1 kvm
rtl8188ee 147456 0
crct10dif_pclmul 16384 1
snd_hda_codec 217088 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
crc32_pclmul 16384 0
polyval_clmulni 16384 0
rtl_pci 45056 1 rtl8188ee
polyval_generic 16384 1 polyval_clmulni
gf128mul 16384 1 polyval_generic
rtlwifi 155648 2 rtl_pci,rtl8188ee
snd_hda_core 139264 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
ghash_clmulni_intel 16384 0
sha512_ssse3 49152 0
drm_buddy 20480 1 i915
snd_hwdep 20480 1 snd_hda_codec
aesni_intel 401408 0
i2c_algo_bit 20480 1 i915
crypto_simd 16384 1 aesni_intel
at24 28672 0
btrfs 2052096 1
mac80211 1503232 3 rtl_pci,rtl8188ee,rtlwifi
nvidia_uvm 2744320 0
snd_pcm 200704 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
cryptd 32768 2 crypto_simd,ghash_clmulni_intel
iTCO_wdt 16384 0
blake2b_generic 24576 0
ttm 102400 1 i915
ppdev 24576 0
mei_hdcp 28672 0
i2c_i801 45056 0
snd_timer 53248 2 snd_seq,snd_pcm
mei_pxp 20480 0
intel_pmc_bxt 16384 1 iTCO_wdt
libarc4 16384 1 mac80211
rapl 20480 0
xor 24576 1 btrfs
drm_display_helper 208896 1 i915
gpio_ich 16384 0
cfg80211 1286144 2 rtlwifi,mac80211
iTCO_vendor_support 16384 1 iTCO_wdt
mei_me 61440 2
intel_cstate 24576 0
snd 151552 16 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
raid6_pq 122880 1 btrfs
cec 86016 2 drm_display_helper,i915
video 77824 2 i915,nvidia_modeset
parport_pc 77824 0
libcrc32c 16384 1 btrfs
intel_uncore 258048 0
pcspkr 16384 0
i2c_smbus 20480 1 i2c_i801
lpc_ich 28672 0
soundcore 16384 1 snd
intel_gtt 28672 1 i915
rfkill 40960 4 rtlwifi,cfg80211
wmi 45056 1 video
mei 192512 5 mei_hdcp,mei_pxp,mei_me
mousedev 24576 0
e1000e 372736 0
parport 81920 2 parport_pc,ppdev
joydev 28672 0
nvidia 40673280 1423 nvidia_uvm,nvidia_modeset
mac_hid 16384 0
sg 49152 0
crypto_user 20480 0
fuse 204800 3
loop 40960 0
dm_mod 225280 0
bpf_preload 24576 0
ip_tables 40960 0
x_tables 61440 1 ip_tables
ext4 1163264 3
uas 36864 0
usb_storage 86016 1 uas
crc32c_generic 16384 0
crc16 16384 1 ext4
mbcache 16384 1 ext4
jbd2 217088 1 ext4
usbhid 77824 0
sr_mod 28672 0
crc32c_intel 24576 5
cdrom 86016 1 sr_mod
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
Bonjour,
Tu as dû utiliser nvidia-settings ou nvidia-xconfig un jour, supprime ce fichier /etc/X11/xorg.conf qui est complètement invalide.
Je te recommande de créer à la place ce fichier :
Puis redémarre / relance ton interface graphique et donne nous le nouveau log de Xorg
Mais je suis assez inquiet, il ne voit pas d'écran branché. Es tu sûr que le cable de l'écran est parfaitement branché (c'est quoi comme câble : HDMI, DVI, VGA, ?)
Tu as dû utiliser nvidia-settings ou nvidia-xconfig un jour, supprime ce fichier /etc/X11/xorg.conf qui est complètement invalide.
Je te recommande de créer à la place ce fichier :
Code : Tout sélectionner
Section "Device"
Identifier "Card0"
Driver "nvidia"
Option "ConnectToAcpid" "0"
#Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "metaScreen"
Device "Card0"
DefaultDepth 24
#Option "metamodes" "DFP-0: nvidia-auto-select"
EndSection
Mais je suis assez inquiet, il ne voit pas d'écran branché. Es tu sûr que le cable de l'écran est parfaitement branché (c'est quoi comme câble : HDMI, DVI, VGA, ?)
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [nvidia] écran noir après mise à jour
Ok
J'ai toujours un écran noir au démarrage
Mon nouveau Xorg.0.log :
J'ai toujours un écran noir au démarrage
Mon nouveau Xorg.0.log :
Code : Tout sélectionner
[ 4.653] (--) Log file renamed from "/var/log/Xorg.pid-477.log" to "/var/log/Xorg.0.log"
[ 4.660]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 4.660] Current Operating System: Linux dauphin 6.3.1-arch2-1 #1 SMP PREEMPT_DYNAMIC Wed, 10 May 2023 08:54:47 +0000 x86_64
[ 4.660] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb1 rw initrd=../initramfs-linux.img
[ 4.660]
[ 4.660] Current version of pixman: 0.42.2
[ 4.660] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.660] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.660] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 14 19:22:03 2023
[ 4.669] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.669] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.669] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.675] (==) No Layout section. Using the first Screen section.
[ 4.675] (**) |-->Screen "metaScreen" (0)
[ 4.675] (**) | |-->Monitor "<default monitor>"
[ 4.676] (**) | |-->Device "Card0"
[ 4.676] (==) No monitor specified for screen "metaScreen".
Using a default monitor configuration.
[ 4.676] (==) Automatically adding devices
[ 4.676] (==) Automatically enabling devices
[ 4.676] (==) Automatically adding GPU devices
[ 4.676] (==) Automatically binding GPU devices
[ 4.676] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.685] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 4.685] Entry deleted from font path.
[ 4.685] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 4.685] Entry deleted from font path.
[ 4.685] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 4.685] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.685] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.685] (II) Module ABI versions:
[ 4.685] X.Org ANSI C Emulation: 0.4
[ 4.685] X.Org Video Driver: 25.2
[ 4.685] X.Org XInput driver : 24.4
[ 4.685] X.Org Server Extension : 10.0
[ 4.688] (++) using VT number 1
[ 4.688] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.689] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.689] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 4.689] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.689] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 4.690] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 4.692] (--) PCI: (0@0:2:0) 8086:0102:8086:200d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4.692] (--) PCI:*(1@0:0:0) 10de:128b:1043:85e7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 4.692] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.692] (II) LoadModule: "glx"
[ 4.694] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.708] (II) Module glx: vendor="X.Org Foundation"
[ 4.708] compiled for 1.21.1.8, module version = 1.0.0
[ 4.708] ABI class: X.Org Server Extension, version 10.0
[ 4.708] (II) LoadModule: "nvidia"
[ 4.710] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.721] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.721] compiled for 1.6.99.901, module version = 1.0.0
[ 4.721] Module class: X.Org Video Driver
[ 4.722] (II) NVIDIA dlloader X Driver 470.182.03 Fri Feb 24 03:24:48 UTC 2023
[ 4.722] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.726] (II) Loading sub module "fb"
[ 4.726] (II) LoadModule: "fb"
[ 4.726] (II) Module "fb" already built-in
[ 4.726] (II) Loading sub module "wfb"
[ 4.726] (II) LoadModule: "wfb"
[ 4.727] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.729] (II) Module wfb: vendor="X.Org Foundation"
[ 4.729] compiled for 1.21.1.8, module version = 1.0.0
[ 4.729] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.729] (II) Loading sub module "ramdac"
[ 4.729] (II) LoadModule: "ramdac"
[ 4.729] (II) Module "ramdac" already built-in
[ 4.730] (II) NVIDIA(0): Creating default Display subsection in Screen section
"metaScreen" for depth/fbbpp 24/32
[ 4.730] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 4.730] (==) NVIDIA(0): RGB weight 888
[ 4.730] (==) NVIDIA(0): Default visual is TrueColor
[ 4.730] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.730] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 4.730] (**) NVIDIA(0): Option "ConnectToAcpid" "0"
[ 4.730] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 4.731] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.731] (II) Loading sub module "glxserver_nvidia"
[ 4.731] (II) LoadModule: "glxserver_nvidia"
[ 4.731] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 4.827] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 4.827] compiled for 1.6.99.901, module version = 1.0.0
[ 4.827] Module class: X.Org Server Extension
[ 4.827] (II) NVIDIA GLX Module 470.182.03 Fri Feb 24 03:21:43 UTC 2023
[ 4.828] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 5.474] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 5.474] (--) NVIDIA(0): CRT-0
[ 5.474] (--) NVIDIA(0): DFP-0 (boot)
[ 5.474] (--) NVIDIA(0): DFP-1
[ 5.475] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GT 710 (GK208) at PCI:1:0:0 (GPU-0)
[ 5.475] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 5.475] (--) NVIDIA(0): VideoBIOS: 80.28.b8.00.05
[ 5.475] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 5.476] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 5.476] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 5.476] (--) NVIDIA(GPU-0):
[ 5.476] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 5.476] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 5.476] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 5.476] (--) NVIDIA(GPU-0):
[ 5.476] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 5.476] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 5.476] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 5.476] (--) NVIDIA(GPU-0):
[ 5.476] (==) NVIDIA(0):
[ 5.476] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 5.476] (==) NVIDIA(0): will be used as the requested mode.
[ 5.476] (==) NVIDIA(0):
[ 5.476] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 5.476] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 5.476] (II) NVIDIA(0): Validated MetaModes:
[ 5.476] (II) NVIDIA(0): "NULL"
[ 5.476] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 5.476] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 5.476] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 5.476] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[ 5.476] (II) NVIDIA: access.
[ 5.499] (II) NVIDIA(0): Setting mode "NULL"
[ 5.539] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 5.539] (==) NVIDIA(0): Backing store enabled
[ 5.539] (==) NVIDIA(0): Silken mouse enabled
[ 5.539] (==) NVIDIA(0): DPMS enabled
[ 5.539] (II) Loading sub module "dri2"
[ 5.539] (II) LoadModule: "dri2"
[ 5.539] (II) Module "dri2" already built-in
[ 5.539] (II) NVIDIA(0): [DRI2] Setup complete
[ 5.539] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 5.539] (II) Initializing extension Generic Event Extension
[ 5.539] (II) Initializing extension SHAPE
[ 5.539] (II) Initializing extension MIT-SHM
[ 5.540] (II) Initializing extension XInputExtension
[ 5.540] (II) Initializing extension XTEST
[ 5.540] (II) Initializing extension BIG-REQUESTS
[ 5.540] (II) Initializing extension SYNC
[ 5.540] (II) Initializing extension XKEYBOARD
[ 5.540] (II) Initializing extension XC-MISC
[ 5.540] (II) Initializing extension SECURITY
[ 5.540] (II) Initializing extension XFIXES
[ 5.540] (II) Initializing extension RENDER
[ 5.540] (II) Initializing extension RANDR
[ 5.541] (II) Initializing extension COMPOSITE
[ 5.541] (II) Initializing extension DAMAGE
[ 5.541] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.541] (II) Initializing extension DOUBLE-BUFFER
[ 5.541] (II) Initializing extension RECORD
[ 5.541] (II) Initializing extension DPMS
[ 5.541] (II) Initializing extension Present
[ 5.541] (II) Initializing extension DRI3
[ 5.541] (II) Initializing extension X-Resource
[ 5.541] (II) Initializing extension XVideo
[ 5.541] (II) Initializing extension XVideo-MotionCompensation
[ 5.541] (II) Initializing extension GLX
[ 5.541] (II) Initializing extension GLX
[ 5.541] (II) Indirect GLX disabled.
[ 5.542] (II) GLX: Another vendor is already registered for screen 0
[ 5.542] (II) Initializing extension XFree86-VidModeExtension
[ 5.542] (II) Initializing extension XFree86-DGA
[ 5.542] (II) Initializing extension XFree86-DRI
[ 5.542] (II) Initializing extension DRI2
[ 5.542] (II) Initializing extension NV-GLX
[ 5.542] (II) Initializing extension NV-CONTROL
[ 5.626] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.626] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.626] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.626] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 5.626] (II) LoadModule: "libinput"
[ 5.626] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.632] (II) Module libinput: vendor="X.Org Foundation"
[ 5.632] compiled for 1.21.1.8, module version = 1.3.0
[ 5.632] Module class: X.Org XInput Driver
[ 5.632] ABI class: X.Org XInput driver, version 24.4
[ 5.632] (II) Using input driver 'libinput' for 'Power Button'
[ 5.632] (**) Power Button: always reports core events
[ 5.632] (**) Option "Device" "/dev/input/event1"
[ 5.641] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.641] (II) event1 - Power Button: device is a keyboard
[ 5.641] (II) event1 - Power Button: device removed
[ 5.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.663] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.663] (**) Option "xkb_layout" "fr"
[ 5.663] (**) Option "xkb_variant" "bepo"
[ 5.682] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.682] (II) event1 - Power Button: device is a keyboard
[ 5.682] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.682] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.682] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.682] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 5.682] (II) Using input driver 'libinput' for 'Power Button'
[ 5.682] (**) Power Button: always reports core events
[ 5.682] (**) Option "Device" "/dev/input/event0"
[ 5.683] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5.683] (II) event0 - Power Button: device is a keyboard
[ 5.683] (II) event0 - Power Button: device removed
[ 5.703] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5.703] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5.703] (**) Option "xkb_layout" "fr"
[ 5.703] (**) Option "xkb_variant" "bepo"
[ 5.704] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5.704] (II) event0 - Power Button: device is a keyboard
[ 5.705] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[ 5.705] (II) No input driver specified, ignoring this device.
[ 5.705] (II) This device may have been added with another device file.
[ 5.705] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 5.705] (II) No input driver specified, ignoring this device.
[ 5.705] (II) This device may have been added with another device file.
[ 5.705] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[ 5.705] (II) No input driver specified, ignoring this device.
[ 5.705] (II) This device may have been added with another device file.
[ 5.706] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[ 5.706] (II) No input driver specified, ignoring this device.
[ 5.706] (II) This device may have been added with another device file.
[ 5.707] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event2)
[ 5.707] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.707] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.707] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "Keyboard Layout"
[ 5.707] (II) Using input driver 'libinput' for 'CHICONY HP Basic USB Keyboard'
[ 5.707] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 5.707] (**) Option "Device" "/dev/input/event2"
[ 5.708] (II) event2 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 5.708] (II) event2 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 5.708] (II) event2 - CHICONY HP Basic USB Keyboard: device removed
[ 5.723] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:03F0:0024.0001/input/input2/event2"
[ 5.723] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 8)
[ 5.723] (**) Option "xkb_layout" "fr"
[ 5.723] (**) Option "xkb_variant" "bepo"
[ 5.724] (II) event2 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 5.725] (II) event2 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 5.725] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 5.725] (II) No input driver specified, ignoring this device.
[ 5.725] (II) This device may have been added with another device file.
[ 5.725] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 5.725] (II) No input driver specified, ignoring this device.
[ 5.726] (II) This device may have been added with another device file.
[ 5.726] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 5.726] (II) No input driver specified, ignoring this device.
[ 5.726] (II) This device may have been added with another device file.
[ 5.726] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event13)
[ 5.726] (II) No input driver specified, ignoring this device.
[ 5.726] (II) This device may have been added with another device file.
[ 5.727] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 5.727] (II) No input driver specified, ignoring this device.
[ 5.727] (II) This device may have been added with another device file.
[ 5.727] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event3)
[ 5.727] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 5.727] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[ 5.727] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'
[ 5.727] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[ 5.727] (**) Option "Device" "/dev/input/event3"
[ 5.785] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 5.785] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 5.786] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device removed
[ 5.816] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.816] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.816] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.816] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:062A:4102.0002/input/input3/event3"
[ 5.816] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 9)
[ 5.817] (**) Option "AccelerationScheme" "none"
[ 5.817] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0
[ 5.817] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[ 5.817] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[ 5.875] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 5.875] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 5.877] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)
[ 5.877] (II) No input driver specified, ignoring this device.
[ 5.877] (II) This device may have been added with another device file.
[ 5.879] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event4)
[ 5.879] (II) No input driver specified, ignoring this device.
[ 5.879] (II) This device may have been added with another device file.
[ 5.879] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 5.879] (II) No input driver specified, ignoring this device.
[ 5.879] (II) This device may have been added with another device file.
[ 8.210] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 8.210] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 8.210] (--) NVIDIA(GPU-0):
[ 8.210] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 8.210] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 8.210] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 8.210] (--) NVIDIA(GPU-0):
[ 8.210] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 8.210] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 8.210] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 8.210] (--) NVIDIA(GPU-0):
[ 9.719] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 9.719] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 9.719] (--) NVIDIA(GPU-0):
[ 9.719] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 9.719] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 9.719] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 9.719] (--) NVIDIA(GPU-0):
[ 9.719] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 9.719] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 9.719] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 9.719] (--) NVIDIA(GPU-0):
[ 26.005] (II) event1 - Power Button: device removed
[ 26.023] (II) event0 - Power Button: device removed
[ 26.037] (II) event2 - CHICONY HP Basic USB Keyboard: device removed
[ 26.053] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device removed
Re: [nvidia] écran noir après mise à jour
Et, oui, mon câble écran est bien branché (avec un câble dvi-hdmi)
Là, j'utilise l'écran pour interragir avec le mode console
Et tout marchait bien avant la mise-à-jour de ce matin…
Là, j'utilise l'écran pour interragir avec le mode console
Et tout marchait bien avant la mise-à-jour de ce matin…
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
Là comme cela je ne peux que te recommander d'installer linux lts, les headers associés, rajouter l'entrée qui va bien dans ton chargeur de démarrage pour voir si cela résout ton problème
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
Hum, je n'avais pas fait attention, mais c'est un PC portable avec la technologie optimus... C'est quoi ta configuration à ce propos ? Tu ne devrais pas être sur la carte intel ?
Car par défaut avec une telle configuration si c'est bien un PC portable, alors cela ne peut pas fonctionner ainsi.
Car par défaut avec une telle configuration si c'est bien un PC portable, alors cela ne peut pas fonctionner ainsi.
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [nvidia] écran noir après mise à jour
Alors, j'ai installé linux-lts (avec les headers).
Un peu au hasard, j'ai lancé un grub-mkconfig et j'ai redémarré
Et, miracle, ça remarche !
Sauf que ...
Un petit uname -a me montre que je ne suis pas sur le noyau lts
Bizarre, non ?
Un peu au hasard, j'ai lancé un grub-mkconfig et j'ai redémarré
Et, miracle, ça remarche !
Sauf que ...
Un petit uname -a me montre que je ne suis pas sur le noyau lts
Bizarre, non ?
Re: [nvidia] écran noir après mise à jour
Alors, en fait, j'ai récupéré le dd de mon ancien portable et je l'ai mis dans une tour. Curieusement, tout a fonctionné du premier coup, sans réinstallation du système. Et depuis, je n'ai presque rien modifié, c'est pour ça qu'on trouve encore des traces de mon ancienne config portable dedans.benjarobin a écrit : ↑dim. 14 mai 2023, 19:46 Hum, je n'avais pas fait attention, mais c'est un PC portable avec la technologie optimus... C'est quoi ta configuration à ce propos ? Tu ne devrais pas être sur la carte intel ?
Car par défaut avec une telle configuration si c'est bien un PC portable, alors cela ne peut pas fonctionner ainsi.
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
Alors comment dire, j'ai tellement de questions.
- Déjà peux tu donner le log de Xorg quand cela fonctionne.
- Pourquoi on voit la carte intel alors que c'est une tour, elle devrait se désactiver...
- Quand tu as démarré, dans le menu de Grub, qu'est ce que tu as choisi comme entrée (linux ou linux-lts) ?
- Je me rappel qu'il était nécessaire de réinstaller Grub si on re-générait une nouvelle config de Grub suite à une incompatibilité / évolution. Manifestement cela fonctionne toujours, tu n'as pas cassé le boot...
- Déjà peux tu donner le log de Xorg quand cela fonctionne.
- Pourquoi on voit la carte intel alors que c'est une tour, elle devrait se désactiver...
- Quand tu as démarré, dans le menu de Grub, qu'est ce que tu as choisi comme entrée (linux ou linux-lts) ?
- Je me rappel qu'il était nécessaire de réinstaller Grub si on re-générait une nouvelle config de Grub suite à une incompatibilité / évolution. Manifestement cela fonctionne toujours, tu n'as pas cassé le boot...
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [nvidia] écran noir après mise à jour
benjarobin a écrit : ↑dim. 14 mai 2023, 20:08 Alors comment dire, j'ai tellement de questions.
- Déjà peux tu donner le log de Xorg quand cela fonctionne.
Code : Tout sélectionner
[ 5.395] (--) Log file renamed from "/var/log/Xorg.pid-483.log" to "/var/log/Xorg.0.log"
[ 5.401]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 5.401] Current Operating System: Linux dauphin 6.3.1-arch2-1 #1 SMP PREEMPT_DYNAMIC Wed, 10 May 2023 08:54:47 +0000 x86_64
[ 5.401] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb1 rw initrd=../initramfs-linux.img
[ 5.401]
[ 5.401] Current version of pixman: 0.42.2
[ 5.401] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.401] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.401] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 14 19:55:41 2023
[ 5.407] (==) Using config file: "/etc/X11/xorg.conf"
[ 5.407] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.407] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.415] (==) No Layout section. Using the first Screen section.
[ 5.415] (**) |-->Screen "metaScreen" (0)
[ 5.415] (**) | |-->Monitor "<default monitor>"
[ 5.415] (**) | |-->Device "Card0"
[ 5.415] (==) No monitor specified for screen "metaScreen".
Using a default monitor configuration.
[ 5.415] (==) Automatically adding devices
[ 5.415] (==) Automatically enabling devices
[ 5.415] (==) Automatically adding GPU devices
[ 5.415] (==) Automatically binding GPU devices
[ 5.415] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.426] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 5.426] Entry deleted from font path.
[ 5.426] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 5.426] Entry deleted from font path.
[ 5.426] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 5.426] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.426] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.426] (II) Module ABI versions:
[ 5.426] X.Org ANSI C Emulation: 0.4
[ 5.426] X.Org Video Driver: 25.2
[ 5.426] X.Org XInput driver : 24.4
[ 5.426] X.Org Server Extension : 10.0
[ 5.427] (++) using VT number 1
[ 5.427] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.428] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.428] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 5.428] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5.428] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 5.430] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 5.431] (--) PCI: (0@0:2:0) 8086:0102:8086:200d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 5.431] (--) PCI:*(1@0:0:0) 10de:128b:1043:85e7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 5.431] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.431] (II) LoadModule: "glx"
[ 5.433] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.452] (II) Module glx: vendor="X.Org Foundation"
[ 5.452] compiled for 1.21.1.8, module version = 1.0.0
[ 5.452] ABI class: X.Org Server Extension, version 10.0
[ 5.452] (II) LoadModule: "nvidia"
[ 5.454] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.465] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.465] compiled for 1.6.99.901, module version = 1.0.0
[ 5.465] Module class: X.Org Video Driver
[ 5.466] (II) NVIDIA dlloader X Driver 470.182.03 Fri Feb 24 03:24:48 UTC 2023
[ 5.466] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.469] (II) Loading sub module "fb"
[ 5.469] (II) LoadModule: "fb"
[ 5.469] (II) Module "fb" already built-in
[ 5.469] (II) Loading sub module "wfb"
[ 5.469] (II) LoadModule: "wfb"
[ 5.471] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.474] (II) Module wfb: vendor="X.Org Foundation"
[ 5.474] compiled for 1.21.1.8, module version = 1.0.0
[ 5.474] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.474] (II) Loading sub module "ramdac"
[ 5.474] (II) LoadModule: "ramdac"
[ 5.474] (II) Module "ramdac" already built-in
[ 5.475] (II) NVIDIA(0): Creating default Display subsection in Screen section
"metaScreen" for depth/fbbpp 24/32
[ 5.475] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 5.475] (==) NVIDIA(0): RGB weight 888
[ 5.475] (==) NVIDIA(0): Default visual is TrueColor
[ 5.475] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.475] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 5.475] (**) NVIDIA(0): Option "ConnectToAcpid" "0"
[ 5.475] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 5.475] (**) NVIDIA(0): Enabling 2D acceleration
[ 5.475] (II) Loading sub module "glxserver_nvidia"
[ 5.475] (II) LoadModule: "glxserver_nvidia"
[ 5.475] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 5.573] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 5.573] compiled for 1.6.99.901, module version = 1.0.0
[ 5.573] Module class: X.Org Server Extension
[ 5.573] (II) NVIDIA GLX Module 470.182.03 Fri Feb 24 03:21:43 UTC 2023
[ 5.574] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 6.285] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 6.285] (--) NVIDIA(0): CRT-0
[ 6.285] (--) NVIDIA(0): DFP-0 (boot)
[ 6.285] (--) NVIDIA(0): DFP-1
[ 6.286] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GT 710 (GK208) at PCI:1:0:0 (GPU-0)
[ 6.286] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 6.286] (--) NVIDIA(0): VideoBIOS: 80.28.b8.00.05
[ 6.286] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 6.287] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 6.287] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 6.287] (--) NVIDIA(GPU-0):
[ 6.330] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): connected
[ 6.330] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): Internal TMDS
[ 6.330] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): 340.0 MHz maximum pixel clock
[ 6.330] (--) NVIDIA(GPU-0):
[ 6.330] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 6.330] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 6.330] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 6.330] (--) NVIDIA(GPU-0):
[ 6.334] (==) NVIDIA(0):
[ 6.334] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 6.334] (==) NVIDIA(0): will be used as the requested mode.
[ 6.334] (==) NVIDIA(0):
[ 6.334] (II) NVIDIA(0): Validated MetaModes:
[ 6.334] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 6.334] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 6.338] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 6.338] (--) NVIDIA(0): option
[ 6.339] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[ 6.339] (II) NVIDIA: access.
[ 6.362] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 6.417] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6.417] (==) NVIDIA(0): Backing store enabled
[ 6.417] (==) NVIDIA(0): Silken mouse enabled
[ 6.418] (==) NVIDIA(0): DPMS enabled
[ 6.418] (II) Loading sub module "dri2"
[ 6.418] (II) LoadModule: "dri2"
[ 6.418] (II) Module "dri2" already built-in
[ 6.418] (II) NVIDIA(0): [DRI2] Setup complete
[ 6.418] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 6.418] (II) Initializing extension Generic Event Extension
[ 6.418] (II) Initializing extension SHAPE
[ 6.418] (II) Initializing extension MIT-SHM
[ 6.418] (II) Initializing extension XInputExtension
[ 6.418] (II) Initializing extension XTEST
[ 6.418] (II) Initializing extension BIG-REQUESTS
[ 6.418] (II) Initializing extension SYNC
[ 6.419] (II) Initializing extension XKEYBOARD
[ 6.419] (II) Initializing extension XC-MISC
[ 6.419] (II) Initializing extension SECURITY
[ 6.419] (II) Initializing extension XFIXES
[ 6.419] (II) Initializing extension RENDER
[ 6.419] (II) Initializing extension RANDR
[ 6.419] (II) Initializing extension COMPOSITE
[ 6.419] (II) Initializing extension DAMAGE
[ 6.419] (II) Initializing extension MIT-SCREEN-SAVER
[ 6.419] (II) Initializing extension DOUBLE-BUFFER
[ 6.419] (II) Initializing extension RECORD
[ 6.420] (II) Initializing extension DPMS
[ 6.420] (II) Initializing extension Present
[ 6.420] (II) Initializing extension DRI3
[ 6.420] (II) Initializing extension X-Resource
[ 6.420] (II) Initializing extension XVideo
[ 6.420] (II) Initializing extension XVideo-MotionCompensation
[ 6.420] (II) Initializing extension GLX
[ 6.420] (II) Initializing extension GLX
[ 6.420] (II) Indirect GLX disabled.
[ 6.420] (II) GLX: Another vendor is already registered for screen 0
[ 6.420] (II) Initializing extension XFree86-VidModeExtension
[ 6.420] (II) Initializing extension XFree86-DGA
[ 6.420] (II) Initializing extension XFree86-DRI
[ 6.420] (II) Initializing extension DRI2
[ 6.420] (II) Initializing extension NV-GLX
[ 6.420] (II) Initializing extension NV-CONTROL
[ 6.420] (II) Initializing extension XINERAMA
[ 6.503] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.503] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.503] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 6.503] (II) LoadModule: "libinput"
[ 6.503] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6.509] (II) Module libinput: vendor="X.Org Foundation"
[ 6.509] compiled for 1.21.1.8, module version = 1.3.0
[ 6.509] Module class: X.Org XInput Driver
[ 6.509] ABI class: X.Org XInput driver, version 24.4
[ 6.509] (II) Using input driver 'libinput' for 'Power Button'
[ 6.509] (**) Power Button: always reports core events
[ 6.509] (**) Option "Device" "/dev/input/event1"
[ 6.518] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 6.518] (II) event1 - Power Button: device is a keyboard
[ 6.518] (II) event1 - Power Button: device removed
[ 6.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 6.540] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.540] (**) Option "xkb_layout" "fr"
[ 6.540] (**) Option "xkb_variant" "bepo"
[ 6.562] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 6.563] (II) event1 - Power Button: device is a keyboard
[ 6.563] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6.563] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.563] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.563] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 6.563] (II) Using input driver 'libinput' for 'Power Button'
[ 6.563] (**) Power Button: always reports core events
[ 6.563] (**) Option "Device" "/dev/input/event0"
[ 6.565] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.565] (II) event0 - Power Button: device is a keyboard
[ 6.565] (II) event0 - Power Button: device removed
[ 6.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 6.613] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.613] (**) Option "xkb_layout" "fr"
[ 6.613] (**) Option "xkb_variant" "bepo"
[ 6.614] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.614] (II) event0 - Power Button: device is a keyboard
[ 6.615] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[ 6.615] (II) No input driver specified, ignoring this device.
[ 6.615] (II) This device may have been added with another device file.
[ 6.616] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 6.616] (II) No input driver specified, ignoring this device.
[ 6.616] (II) This device may have been added with another device file.
[ 6.616] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[ 6.616] (II) No input driver specified, ignoring this device.
[ 6.617] (II) This device may have been added with another device file.
[ 6.617] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[ 6.617] (II) No input driver specified, ignoring this device.
[ 6.617] (II) This device may have been added with another device file.
[ 6.619] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event2)
[ 6.619] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.619] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.619] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "Keyboard Layout"
[ 6.619] (II) Using input driver 'libinput' for 'CHICONY HP Basic USB Keyboard'
[ 6.619] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 6.619] (**) Option "Device" "/dev/input/event2"
[ 6.621] (II) event2 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 6.621] (II) event2 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 6.621] (II) event2 - CHICONY HP Basic USB Keyboard: device removed
[ 6.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:03F0:0024.0001/input/input2/event2"
[ 6.660] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 8)
[ 6.660] (**) Option "xkb_layout" "fr"
[ 6.660] (**) Option "xkb_variant" "bepo"
[ 6.662] (II) event2 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 6.662] (II) event2 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 6.663] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 6.663] (II) No input driver specified, ignoring this device.
[ 6.663] (II) This device may have been added with another device file.
[ 6.664] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 6.664] (II) No input driver specified, ignoring this device.
[ 6.664] (II) This device may have been added with another device file.
[ 6.664] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 6.664] (II) No input driver specified, ignoring this device.
[ 6.664] (II) This device may have been added with another device file.
[ 6.665] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event13)
[ 6.665] (II) No input driver specified, ignoring this device.
[ 6.665] (II) This device may have been added with another device file.
[ 6.665] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 6.665] (II) No input driver specified, ignoring this device.
[ 6.665] (II) This device may have been added with another device file.
[ 6.666] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event3)
[ 6.666] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 6.666] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[ 6.666] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'
[ 6.666] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[ 6.666] (**) Option "Device" "/dev/input/event3"
[ 6.725] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 6.725] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 6.726] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device removed
[ 6.763] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.763] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.763] (II) libinput: MOSART Semi. 2.4G Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:062A:4102.0002/input/input3/event3"
[ 6.763] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 9)
[ 6.763] (**) Option "AccelerationScheme" "none"
[ 6.763] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0
[ 6.763] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[ 6.763] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[ 6.822] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 6.822] (II) event3 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 6.824] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)
[ 6.824] (II) No input driver specified, ignoring this device.
[ 6.824] (II) This device may have been added with another device file.
[ 6.825] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event4)
[ 6.825] (II) No input driver specified, ignoring this device.
[ 6.825] (II) This device may have been added with another device file.
[ 6.826] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.826] (II) No input driver specified, ignoring this device.
[ 6.826] (II) This device may have been added with another device file.
[ 9.200] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 9.200] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 9.200] (--) NVIDIA(GPU-0):
[ 9.244] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): connected
[ 9.244] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): Internal TMDS
[ 9.244] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): 340.0 MHz maximum pixel clock
[ 9.244] (--) NVIDIA(GPU-0):
[ 9.244] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 9.244] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 9.244] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 9.244] (--) NVIDIA(GPU-0):
[ 9.880] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 9.880] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 9.880] (--) NVIDIA(GPU-0):
[ 9.924] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): connected
[ 9.924] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): Internal TMDS
[ 9.924] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): 340.0 MHz maximum pixel clock
[ 9.924] (--) NVIDIA(GPU-0):
[ 9.924] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 9.924] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 9.924] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 9.924] (--) NVIDIA(GPU-0):
[ 1071.503] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): connected
[ 1071.503] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): Internal TMDS
[ 1071.503] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): 340.0 MHz maximum pixel clock
[ 1071.503] (--) NVIDIA(GPU-0):
[ 1071.546] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): connected
[ 1071.546] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): Internal TMDS
[ 1071.546] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): 340.0 MHz maximum pixel clock
[ 1071.546] (--) NVIDIA(GPU-0):
[ 2946.241] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): connected
[ 2946.241] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): Internal TMDS
[ 2946.241] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): 340.0 MHz maximum pixel clock
[ 2946.241] (--) NVIDIA(GPU-0):
[ 2946.285] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): connected
[ 2946.285] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): Internal TMDS
[ 2946.285] (--) NVIDIA(GPU-0): Acer KA220HQ (DFP-0): 340.0 MHz maximum pixel clock
[ 2946.285] (--) NVIDIA(GPU-0):
Bonne question. Le chipset graphique de la carte-mère, c'est du intel. C'est juste que je l'utilise pas parce qu'il n'avait pas de sortie hdmi.benjarobin a écrit : ↑dim. 14 mai 2023, 20:08 - Pourquoi on voit la carte intel alors que c'est une tour, elle devrait se désactiver...
Juste linux. Linux-lts n'apparait pas.benjarobin a écrit : ↑dim. 14 mai 2023, 20:08 - Quand tu as démarré, dans le menu de Grub, qu'est ce que tu as choisi comme entrée (linux ou linux-lts) ?
J'ai presque peur de redémarrer mon pc du coup... Ça a l'air miraculeux qu'il fonctionne comme çabenjarobin a écrit : ↑dim. 14 mai 2023, 20:08 - Je me rappel qu'il était nécessaire de réinstaller Grub si on re-générait une nouvelle config de Grub suite à une incompatibilité / évolution. Manifestement cela fonctionne toujours, tu n'as pas cassé le boot...
Re: [nvidia] écran noir après mise à jour
Là, on voit bien apparaitre l'écran dans Xorg.0.log
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
C'est fun ton histoire. Pour Grub, si celui-ci à fonctionné une fois, il fonctionnera toujours. Je ne sais pas quoi te dire, le problème c'est corrigé tout seul...
Par contre ce n'est pas normal que linux-lts n'apparaisse pas... Qu'est ce que tu as fait avec grub-mkconfig ? Peux tu donner le contenu de ton grub.cfg actuel ?
Au fait, utiliser
Je suppose que c'est un boot legacy/MBR et non EFI ?
Par contre ce n'est pas normal que linux-lts n'apparaisse pas... Qu'est ce que tu as fait avec grub-mkconfig ? Peux tu donner le contenu de ton grub.cfg actuel ?
Au fait, utiliser
root=/dev/sdb1
est une très mauvaise pratique.Je suppose que c'est un boot legacy/MBR et non EFI ?
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [nvidia] écran noir après mise à jour
Cet accident me fait faire quelques découvertesbenjarobin a écrit : ↑dim. 14 mai 2023, 20:58 C'est fun ton histoire. Pour Grub, si celui-ci à fonctionné une fois, il fonctionnera toujours. Je ne sais pas quoi te dire, le problème c'est corrigé tout seul...
Par contre ce n'est pas normal que linux-lts n'apparaisse pas... Qu'est ce que tu as fait avec grub-mkconfig ? Peux tu donner le contenu de ton grub.cfg actuel ?
Par exemple que mon chargeur de démarrage n'est pas grub mais ... syslinux !
Je voyais régulièrement passer des mises à jour de grub alors j'ai cru que je l'utilisais encore. Mais non.
À quoi fais-tu référence ? Dans quel fichier vois-tu apparaître ça ?benjarobin a écrit : ↑dim. 14 mai 2023, 20:58Au fait, utiliserroot=/dev/sdb1
est une très mauvaise pratique.
Oui, c'est une vieille carte-mère.
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
Je fais référence à la ligne de commande kernel, cherche dans les messages que tu as postés ici, tu verras de quoi je parles. Ligne de commande spécifié dans la configuration du chargeur de démarrage (qui est apparemment Syslinux, je me disais aussi que Grub n'utilisait pas cette syntaxe par défaut pour la ligne de commande kernel)
Il est préférable d'utiliser des UUID. Donc ajoute l'entrée pour linux-lts avec la notation en UUID, et si cela démarre sans problème, tu pourras modifier la configuration de ton entrée courante.
Il est préférable d'utiliser des UUID. Donc ajoute l'entrée pour linux-lts avec la notation en UUID, et si cela démarre sans problème, tu pourras modifier la configuration de ton entrée courante.
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [nvidia] écran noir après mise à jour
Ok, je vois le problème.
J'essaie de faire ça demain.
Merci infiniment pour ton aide !
(C'est fou, mais j'ai la sensation que lorsque j'ai installé mon premier archlinux (en 2012 je crois), c'était déjà toi qui m'avais aidé...)
J'essaie de faire ça demain.
Merci infiniment pour ton aide !
(C'est fou, mais j'ai la sensation que lorsque j'ai installé mon premier archlinux (en 2012 je crois), c'était déjà toi qui m'avais aidé...)
- benjarobin
- Maître du Kyudo
- Messages : 17281
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [nvidia] écran noir après mise à jour
Ce n'est pas qu'une sensation Cela ne me rajeunit pas (bon je ne suis pas si vieux que cela )
Zsh | KDE | PC fixe : core i7, carte nvidia
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [nvidia] écran noir après mise à jour
Bon ben voilà, j'ai renommé avec les UUID les entrées de syslinux et de mon fstab.
Et puis j'en ai profité pour désinstaller grub
Allez, je mets la mention "résolu".
Encore merci pour ton aide et bonne semaine !
Et puis j'en ai profité pour désinstaller grub
Allez, je mets la mention "résolu".
Encore merci pour ton aide et bonne semaine !