[Perte de connexion] archlinux

Breizil29 · Message par **Breizil29** » sam. 09 déc. 2023, 10:37

Bonjour à tous,
Je suis en dual-boot archlinux/windows11 sur mon i7.
Grub/archlinux gère les 2 entrées.
Si je suis sur Windows et que je redémarre sur arch je n'ai plus de connexion internet
Je suis obligé d'éteindre la machine + coupé l'interupteur de l'alimentation
Redémarrage sur arch et tous fonctionne.

Message par **benjarobin** » sam. 09 déc. 2023, 10:43

Bonjour, il va nous falloir beaucoup plus d'informations.
En wifi ou en ethernet ?
Gestionnaire de connexion utilisé ? Message d'erreur associé ?
Est ce que tu obtiens une IP locale ?

Breizil29 · Message par **Breizil29** » sam. 09 déc. 2023, 15:40

benjarobin a écrit : ↑sam. 09 déc. 2023, 10:43 En wifi ou en ethernet ? Etherner
Gestionnaire de connexion utilisé ? Message d'erreur associé ? Networkmanager - bureau gnome
Est ce que tu obtiens une IP locale ? non

Dans les settings/network -> cable unplugged

Message par **benjarobin** » sam. 09 déc. 2023, 18:54

Quelle est la sortie (quand cela ne fonctionne pas) de la commande : ip a

Breizil29 · Message par **Breizil29** » sam. 09 déc. 2023, 22:11

Code : Tout sélectionner

➜ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: enp6s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether 04:42:1a:97:b5:cd brd ff:ff:ff:ff:ff:ff

Message par **benjarobin** » sam. 09 déc. 2023, 22:47

Est ce que débrancher physiquement le câble Ethernet pendant 10s puis le rebrancher aide ?
Clairement c'est un bug dans le driver de ta carte réseau, enfin tout le laisse penser...

Breizil29 · Message par **Breizil29** » sam. 09 déc. 2023, 23:37

Débrancher pendant 10s ne fait rien.
Pour info : j'ai déjà eu ce problème et il me semble qu'il avait fallu modifier quelque chose dans windows.
Précision : Si je ne vais pas sur windows pendant plusieurs jours ma connection internet fonctionne parfaitement, il n'y a que quand je vais sur windows puis je redémarre et vais sur arch et là plus d'internet, windows garde la connexion pour lui.

Message par **benjarobin** » dim. 10 déc. 2023, 19:40

Peux tu donner la sortie de :

Code : Tout sélectionner

sudo hwinfo --netcard
sudo dmesg

Quand cela fonctionne, et quand cela ne fonctionne pas.

Breizil29 · Message par **Breizil29** » dim. 17 déc. 2023, 11:53

Quand cela fonctionne

Code : Tout sélectionner

➜ sudo hwinfo --netcard
21: PCI 600.0: 0200 Ethernet controller
  [Created at pci.386]
  Unique ID: 4Nnf._YwynxKL005
  Parent ID: hoOk.cG+yOr3gSQ5
  SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:06:00.0
  SysFS BusID: 0000:06:00.0
  Hardware Class: network
  Model: "Realtek RTL8125 2.5GbE Controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8125 "RTL8125 2.5GbE Controller"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x87d7
  Revision: 0x05
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: enp6s0
  I/O Ports: 0x3000-0x3fff (rw)
  Memory Range: 0x83c00000-0x83c0ffff (rw,non-prefetchable)
  Memory Range: 0x83c10000-0x83c13fff (rw,non-prefetchable)
  IRQ: 18 (5 events)
  HW Address: 04:42:1a:97:b5:cd
  Permanent HW Address: 04:42:1a:97:b5:cd
  Link detected: yes
  Module Alias: "pci:v000010ECd00008125sv00001043sd000087D7bc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #31 (PCI bridge)

Quand cela ne fonctionne pas

Code : Tout sélectionner

➜ sudo hwinfo --netcard
21: PCI 600.0: 0200 Ethernet controller
  [Created at pci.386]
  Unique ID: 4Nnf._YwynxKL005
  Parent ID: hoOk.cG+yOr3gSQ5
  SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:06:00.0
  SysFS BusID: 0000:06:00.0
  Hardware Class: network
  Model: "Realtek RTL8125 2.5GbE Controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8125 "RTL8125 2.5GbE Controller"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x87d7
  Revision: 0x05
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: enp6s0
  I/O Ports: 0x3000-0x3fff (rw)
  Memory Range: 0x83c00000-0x83c0ffff (rw,non-prefetchable)
  Memory Range: 0x83c10000-0x83c13fff (rw,non-prefetchable)
  IRQ: 18 (5 events)
  HW Address: 04:42:1a:97:b5:cd
  Permanent HW Address: 04:42:1a:97:b5:cd
  Link detected: no
  Module Alias: "pci:v000010ECd00008125sv00001043sd000087D7bc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #31 (PCI bridge)

Je ne peut pas partager les résultats des commandes dmesg trop volumineux, j'ai essayé avex pastebinit mais :

Code : Tout sélectionner

Failed to contact the server: HTTP Error 405: Method Not Allowed

Message par **benjarobin** » dim. 17 déc. 2023, 11:59

Est-ce possible d'avoir la sortie de dmesg (ce qui est le plus important) ?
As tu le paquet linux-firmware d'installé ?
Tu peux aussi essayé d'installé le paquet r8125-dkms et de blacklist le module r8169

Breizil29 · Message par **Breizil29** » dim. 17 déc. 2023, 15:34

benjarobin a écrit : ↑dim. 17 déc. 2023, 11:59 Est-ce possible d'avoir la sortie de dmesg (ce qui est le plus important) ?

Code : Tout sélectionner

➜ pastebinit /home/gg/Documents/OK
Failed to contact the server: HTTP Error 405: Method Not Allowed

voir mon message ci-deesus
As tu le paquet linux-firmware d'installé ? oui
Tu peux aussi essayé d'installé le paquet r8125-dkms et de blacklist le module r8169 => on verra plus tard, pour l'instant j'aimerais te partager mes résultats de la commande dmesg

Message par **benjarobin** » dim. 17 déc. 2023, 15:41

Quelle est la taille de ce fichier, je suis sûr que tu peux trouver plein de site qui permette de partager au moins 1Mo (La sortie de dmesg ne fait pas plus que cela...).
Voir https://wiki.archlinux.org/title/List_o ... n_services par exemple https://0x0.st/ est limité à 512.0 MiB

Edit : Je viens de tester l'outil pastebinit est partiellement cassé. Il fonctionne par exemple avec paste.ubuntu.com, mais pas avec pastebin.com

Breizil29 · Message par **Breizil29** » dim. 17 déc. 2023, 20:08

Quand cela ne fonctionne pas

Code : Tout sélectionner

➜ sudo dmesg
[    0.000000] Linux version 6.6.7-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Thu, 14 Dec 2023 03:45:42 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/rootvg-rootlv rw loglevel=3
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000067e4dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000067e4e000-0x0000000067e4efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000067e4f000-0x0000000067e9bfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000067e9c000-0x0000000067e9cfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000067e9d000-0x00000000745cefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000745cf000-0x00000000782cefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000782cf000-0x000000007851efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007851f000-0x000000007871efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007871f000-0x0000000079ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079fff000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007dffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ee00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0x5ff2e018-0x5ff4dc57] usable ==> usable
[    0.000000] e820: update [mem 0x5ff2e018-0x5ff4dc57] usable ==> usable
[    0.000000] e820: update [mem 0x5ff20018-0x5ff2d857] usable ==> usable
[    0.000000] e820: update [mem 0x5ff20018-0x5ff2d857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000005ff20017] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff20018-0x000000005ff2d857] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff2d858-0x000000005ff2e017] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff2e018-0x000000005ff4dc57] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff4dc58-0x0000000067e4dfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000067e4e000-0x0000000067e4efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000067e4f000-0x0000000067e9bfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000067e9c000-0x0000000067e9cfff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000067e9d000-0x00000000745cefff] usable
[    0.000000] reserve setup_data: [mem 0x00000000745cf000-0x00000000782cefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000782cf000-0x000000007851efff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007851f000-0x000000007871efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007871f000-0x0000000079ffefff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000079fff000-0x0000000079ffffff] usable
[    0.000000] reserve setup_data: [mem 0x000000007a000000-0x000000007dffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007ee00000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000087fffffff] usable
[    0.000000] efi: EFI v2.8 by American Megatrends
[    0.000000] efi: ACPI=0x7851e000 ACPI 2.0=0x7851e014 TPMFinalLog=0x7864c000 SMBIOS=0x79d1d000 SMBIOS 3.0=0x79d1c000 MEMATTR=0x6fefe018 ESRT=0x71d68698 INITRD=0x623c6998 RNG=0x7848cc18 TPMEventLog=0x623bb018
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem81: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
[    0.000000] efi: Not removing mem82: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem83: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem84: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem86: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem87: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.4.0 present.
[    0.000000] DMI: ASUS System Product Name/PRIME H670-PLUS D4, BIOS 1620 08/12/2022
[    0.000000] tsc: Detected 3600.000 MHz processor
[    0.000000] tsc: Detected 3609.600 MHz TSC
[    0.000604] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000605] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000611] last_pfn = 0x880000 max_arch_pfn = 0x400000000
[    0.000613] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000614] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000989] last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.004934] esrt: Reserving ESRT space from 0x0000000071d68698 to 0x0000000071d68720.
[    0.004938] e820: update [mem 0x71d68000-0x71d68fff] usable ==> reserved
[    0.004948] Using GB pages for direct mapping
[    0.004949] Incomplete global flushes, disabling PCID
[    0.005230] Secure boot disabled
[    0.005230] RAMDISK: [mem 0x5de15000-0x5edb5fff]
[    0.005232] ACPI: Early table checksum verification disabled
[    0.005234] ACPI: RSDP 0x000000007851E014 000024 (v02 ALASKA)
[    0.005237] ACPI: XSDT 0x000000007851D728 00011C (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.005241] ACPI: FACP 0x000000007851B000 000114 (v06 ALASKA A M I    01072009 AMI  01000013)
[    0.005244] ACPI: DSDT 0x00000000784A2000 0783DF (v02 ALASKA A M I    01072009 INTL 20200717)
[    0.005246] ACPI: FACS 0x000000007871E000 000040
[    0.005248] ACPI: MCFG 0x000000007851C000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.005250] ACPI: FIDT 0x00000000784A1000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005251] ACPI: FPDT 0x0000000078391000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.005253] ACPI: SSDT 0x000000007849F000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[    0.005255] ACPI: SSDT 0x0000000078499000 005D0B (v02 CpuRef CpuSsdt  00003000 INTL 20200717)
[    0.005256] ACPI: SSDT 0x0000000078496000 002AA1 (v02 SaSsdt SaSsdt   00003000 INTL 20200717)
[    0.005258] ACPI: SSDT 0x0000000078492000 003339 (v02 INTEL  IgfxSsdt 00003000 INTL 20200717)
[    0.005260] ACPI: HPET 0x0000000078491000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.005261] ACPI: APIC 0x0000000078490000 0001DC (v05 ALASKA A M I    01072009 AMI  01000013)
[    0.005263] ACPI: MCFG 0x000000007848F000 00003C (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.005264] ACPI: SSDT 0x000000007848D000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
[    0.005266] ACPI: NHLT 0x000000007848B000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.005268] ACPI: LPIT 0x000000007848A000 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.005270] ACPI: SSDT 0x0000000078486000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
[    0.005271] ACPI: SSDT 0x0000000078483000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
[    0.005273] ACPI: DBGP 0x0000000078482000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.005274] ACPI: DBG2 0x0000000078481000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.005276] ACPI: SSDT 0x0000000078480000 000C1F (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[    0.005277] ACPI: DMAR 0x000000007847F000 000050 (v02 INTEL  EDK2     00000002      01000013)
[    0.005279] ACPI: SSDT 0x000000007847D000 001DA0 (v02 INTEL  xh_adls3 00000000 INTL 20200717)
[    0.005281] ACPI: SSDT 0x0000000078479000 003AEA (v02 SocGpe SocGpe   00003000 INTL 20200717)
[    0.005282] ACPI: SSDT 0x0000000078475000 0039DA (v02 SocCmn SocCmn   00003000 INTL 20200717)
[    0.005284] ACPI: SSDT 0x0000000078474000 000144 (v02 Intel  ADebTabl 00001000 INTL 20200717)
[    0.005285] ACPI: BGRT 0x0000000078473000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005287] ACPI: UEFI 0x000000007858E000 00063A (v01 INTEL  RstVmdE  00000000 INTL 00000000)
[    0.005289] ACPI: UEFI 0x000000007858D000 00005C (v01 INTEL  RstVmdV  00000000 INTL 00000000)
[    0.005290] ACPI: WPBT 0x0000000078394000 000040 (v01 ALASKA A M I    00000001 ASUS 00000001)
[    0.005292] ACPI: TPM2 0x0000000078393000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.005293] ACPI: PHAT 0x0000000078392000 0005F1 (v01 ALASKA A M I    00000005 MSFT 0100000D)
[    0.005295] ACPI: WSMT 0x0000000078489000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005296] ACPI: Reserving FACP table memory at [mem 0x7851b000-0x7851b113]
[    0.005297] ACPI: Reserving DSDT table memory at [mem 0x784a2000-0x7851a3de]
[    0.005298] ACPI: Reserving FACS table memory at [mem 0x7871e000-0x7871e03f]
[    0.005298] ACPI: Reserving MCFG table memory at [mem 0x7851c000-0x7851c03b]
[    0.005299] ACPI: Reserving FIDT table memory at [mem 0x784a1000-0x784a109b]
[    0.005299] ACPI: Reserving FPDT table memory at [mem 0x78391000-0x78391043]
[    0.005300] ACPI: Reserving SSDT table memory at [mem 0x7849f000-0x7849f38b]
[    0.005300] ACPI: Reserving SSDT table memory at [mem 0x78499000-0x7849ed0a]
[    0.005301] ACPI: Reserving SSDT table memory at [mem 0x78496000-0x78498aa0]
[    0.005301] ACPI: Reserving SSDT table memory at [mem 0x78492000-0x78495338]
[    0.005302] ACPI: Reserving HPET table memory at [mem 0x78491000-0x78491037]
[    0.005302] ACPI: Reserving APIC table memory at [mem 0x78490000-0x784901db]
[    0.005302] ACPI: Reserving MCFG table memory at [mem 0x7848f000-0x7848f03b]
[    0.005303] ACPI: Reserving SSDT table memory at [mem 0x7848d000-0x7848ef19]
[    0.005303] ACPI: Reserving NHLT table memory at [mem 0x7848b000-0x7848b02c]
[    0.005304] ACPI: Reserving LPIT table memory at [mem 0x7848a000-0x7848a0cb]
[    0.005304] ACPI: Reserving SSDT table memory at [mem 0x78486000-0x78488356]
[    0.005304] ACPI: Reserving SSDT table memory at [mem 0x78483000-0x78485a82]
[    0.005305] ACPI: Reserving DBGP table memory at [mem 0x78482000-0x78482033]
[    0.005305] ACPI: Reserving DBG2 table memory at [mem 0x78481000-0x78481053]
[    0.005306] ACPI: Reserving SSDT table memory at [mem 0x78480000-0x78480c1e]
[    0.005306] ACPI: Reserving DMAR table memory at [mem 0x7847f000-0x7847f04f]
[    0.005307] ACPI: Reserving SSDT table memory at [mem 0x7847d000-0x7847ed9f]
[    0.005307] ACPI: Reserving SSDT table memory at [mem 0x78479000-0x7847cae9]
[    0.005307] ACPI: Reserving SSDT table memory at [mem 0x78475000-0x784789d9]
[    0.005308] ACPI: Reserving SSDT table memory at [mem 0x78474000-0x78474143]
[    0.005308] ACPI: Reserving BGRT table memory at [mem 0x78473000-0x78473037]
[    0.005309] ACPI: Reserving UEFI table memory at [mem 0x7858e000-0x7858e639]
[    0.005309] ACPI: Reserving UEFI table memory at [mem 0x7858d000-0x7858d05b]
[    0.005310] ACPI: Reserving WPBT table memory at [mem 0x78394000-0x7839403f]
[    0.005310] ACPI: Reserving TPM2 table memory at [mem 0x78393000-0x7839304b]
[    0.005311] ACPI: Reserving PHAT table memory at [mem 0x78392000-0x783925f0]
[    0.005311] ACPI: Reserving WSMT table memory at [mem 0x78489000-0x78489027]
[    0.005467] No NUMA configuration found
[    0.005467] Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
[    0.005469] NODE_DATA(0) allocated [mem 0x87fffb000-0x87fffffff]
[    0.005490] Zone ranges:
[    0.005490]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005491]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.005492]   Normal   [mem 0x0000000100000000-0x000000087fffffff]
[    0.005493]   Device   empty
[    0.005493] Movable zone start for each node
[    0.005494] Early memory node ranges
[    0.005494]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.005495]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.005495]   node   0: [mem 0x0000000000100000-0x0000000067e4dfff]
[    0.005496]   node   0: [mem 0x0000000067e4f000-0x0000000067e9bfff]
[    0.005496]   node   0: [mem 0x0000000067e9d000-0x00000000745cefff]
[    0.005497]   node   0: [mem 0x0000000079fff000-0x0000000079ffffff]
[    0.005497]   node   0: [mem 0x0000000100000000-0x000000087fffffff]
[    0.005498] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
[    0.005501] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.005501] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.005521] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.007739] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.007999] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.008143] On node 0, zone DMA32: 23088 pages in unavailable ranges
[    0.049193] On node 0, zone Normal: 24576 pages in unavailable ranges
[    0.049633] ACPI: PM-Timer IO Port: 0x1808
[    0.049639] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.049640] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.049640] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.049640] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.049641] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.049641] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.049641] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.049642] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.049642] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.049642] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.049643] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.049643] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.049643] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.049644] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.049644] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.049644] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.049645] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.049645] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.049645] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.049646] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.049646] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[    0.049646] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[    0.049647] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[    0.049647] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.049684] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.049686] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.049687] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.049690] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.049690] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.049696] e820: update [mem 0x6eec5000-0x6efb8fff] usable ==> reserved
[    0.049703] TSC deadline timer available
[    0.049704] smpboot: Allowing 20 CPUs, 0 hotplug CPUs
[    0.049715] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.049716] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.049717] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.049717] PM: hibernation: Registered nosave memory: [mem 0x5ff20000-0x5ff20fff]
[    0.049718] PM: hibernation: Registered nosave memory: [mem 0x5ff2d000-0x5ff2dfff]
[    0.049718] PM: hibernation: Registered nosave memory: [mem 0x5ff2e000-0x5ff2efff]
[    0.049719] PM: hibernation: Registered nosave memory: [mem 0x5ff4d000-0x5ff4dfff]
[    0.049720] PM: hibernation: Registered nosave memory: [mem 0x67e4e000-0x67e4efff]
[    0.049721] PM: hibernation: Registered nosave memory: [mem 0x67e9c000-0x67e9cfff]
[    0.049721] PM: hibernation: Registered nosave memory: [mem 0x6eec5000-0x6efb8fff]
[    0.049722] PM: hibernation: Registered nosave memory: [mem 0x71d68000-0x71d68fff]
[    0.049723] PM: hibernation: Registered nosave memory: [mem 0x745cf000-0x782cefff]
[    0.049723] PM: hibernation: Registered nosave memory: [mem 0x782cf000-0x7851efff]
[    0.049723] PM: hibernation: Registered nosave memory: [mem 0x7851f000-0x7871efff]
[    0.049724] PM: hibernation: Registered nosave memory: [mem 0x7871f000-0x79ffefff]
[    0.049724] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7dffffff]
[    0.049725] PM: hibernation: Registered nosave memory: [mem 0x7e000000-0x7edfffff]
[    0.049725] PM: hibernation: Registered nosave memory: [mem 0x7ee00000-0x7fffffff]
[    0.049725] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xfdffffff]
[    0.049726] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.049726] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.049726] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.049727] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.049727] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.049727] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[    0.049727] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.049728] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[    0.049728] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.049728] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.049729] [mem 0x80000000-0xfdffffff] available for PCI devices
[    0.049730] Booting paravirtualized kernel on bare hardware
[    0.049731] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.052910] setup_percpu: NR_CPUS:320 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
[    0.053669] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.053674] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.053675] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.053680] pcpu-alloc: [0] 16 17 18 19 -- -- -- --
[    0.053689] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/rootvg-rootlv rw loglevel=3
[    0.053714] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.053721] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.053721] printk: log_buf_len total cpu_extra contributions: 77824 bytes
[    0.053722] printk: log_buf_len min size: 131072 bytes
[    0.053836] printk: log_buf_len: 262144 bytes
[    0.053836] printk: early log buf free: 111792(85%)
[    0.056570] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.057950] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.058049] Fallback order for Node 0: 0
[    0.058051] Built 1 zonelists, mobility grouping on.  Total pages: 8210358
[    0.058052] Policy zone: Normal
[    0.058255] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.058262] software IO TLB: area num 32.
[    0.116704] Memory: 32548564K/33363376K available (16384K kernel code, 2132K rwdata, 13072K rodata, 3412K init, 3840K bss, 814556K reserved, 0K cma-reserved)
[    0.116866] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
[    0.116886] ftrace: allocating 48807 entries in 191 pages
[    0.121498] ftrace: allocated 191 pages with 7 groups
[    0.121552] Dynamic Preempt: full
[    0.121600] rcu: Preemptible hierarchical RCU implementation.
[    0.121601] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=20.
[    0.121602] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.121602] 	Trampoline variant of Tasks RCU enabled.
[    0.121602] 	Rude variant of Tasks RCU enabled.
[    0.121603] 	Tracing variant of Tasks RCU enabled.
[    0.121603] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.121604] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
[    0.122913] NR_IRQS: 20736, nr_irqs: 2216, preallocated irqs: 16
[    0.123199] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.123434] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.123461] Console: colour dummy device 80x25
[    0.123462] printk: console [tty0] enabled
[    0.123492] ACPI: Core revision 20230628
[    0.123690] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.123690] APIC: Switch to symmetric I/O mode setup
[    0.123692] DMAR: Host address width 39
[    0.123692] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.123697] DMAR: dmar0: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[    0.123699] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 0
[    0.123700] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.123700] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.125119] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.125121] x2apic enabled
[    0.125169] APIC: Switched APIC routing to: cluster x2apic
[    0.129646] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3407c077a8d, max_idle_ns: 440795342283 ns
[    0.129650] Calibrating delay loop (skipped), value calculated using timer frequency.. 7222.00 BogoMIPS (lpj=12032000)
[    0.129696] CPU0: Thermal monitoring enabled (TM1)
[    0.129698] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.129795] process: using mwait in idle threads
[    0.129796] CET detected: Indirect Branch Tracking enabled
[    0.129797] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.129798] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.129800] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.129801] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.129801] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.129802] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.129803] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.129804] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.129811] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.129811] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.129812] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.129812] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.129813] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    0.129813] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.129814] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.129814] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
[    0.129815] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[    0.132982] Freeing SMP alternatives memory: 40K
[    0.132982] pid_max: default: 32768 minimum: 301
[    0.132982] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.132982] landlock: Up and running.
[    0.132982] Yama: becoming mindful.
[    0.132982] LSM support for eBPF active
[    0.132982] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.132982] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.132982] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i7-12700KF (family: 0x6, model: 0x97, stepping: 0x2)
[    0.132982] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.132982] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.132982] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.132982] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.132982] core: cpu_core PMU driver:
[    0.132982] ... version:                5
[    0.132982] ... bit width:              48
[    0.132982] ... generic registers:      8
[    0.132982] ... value mask:             0000ffffffffffff
[    0.132982] ... max period:             00007fffffffffff
[    0.132982] ... fixed-purpose events:   4
[    0.132982] ... event mask:             0001000f000000ff
[    0.132982] signal: max sigframe size: 3632
[    0.132982] Estimated ratio of average max frequency by base frequency (times 1024): 1393
[    0.132982] rcu: Hierarchical SRCU implementation.
[    0.132982] rcu: 	Max phase no-delay instances is 1000.
[    0.132982] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.132982] smp: Bringing up secondary CPUs ...
[    0.132982] smpboot: x86: Booting SMP configuration:
[    0.132982] .... node  #0, CPUs:        #2  #4  #6  #8 #10 #12 #14 #16 #17 #18 #19
[    0.009603] core: cpu_atom PMU driver: PEBS-via-PT
[    0.009603] ... version:                5
[    0.009603] ... bit width:              48
[    0.009603] ... generic registers:      6
[    0.009603] ... value mask:             0000ffffffffffff
[    0.009603] ... max period:             00007fffffffffff
[    0.009603] ... fixed-purpose events:   3
[    0.009603] ... event mask:             000000070000003f
[    0.133589]   #1  #3  #5  #7  #9 #11 #13 #15
[    0.139678] smp: Brought up 1 node, 20 CPUs
[    0.139678] smpboot: Max logical packages: 1
[    0.139678] smpboot: Total of 20 processors activated (144441.00 BogoMIPS)
[    0.143591] devtmpfs: initialized
[    0.143591] x86/mm: Memory block size: 128MB
[    0.143873] ACPI: PM: Registering ACPI NVS region [mem 0x7851f000-0x7871efff] (2097152 bytes)
[    0.143873] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.143873] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.143873] pinctrl core: initialized pinctrl subsystem
[    0.143873] PM: RTC time: 10:25:48, date: 2023-12-17
[    0.143873] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.143909] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.144235] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.144634] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.144643] audit: initializing netlink subsys (disabled)
[    0.144677] audit: type=2000 audit(1702808748.013:1): state=initialized audit_enabled=0 res=1
[    0.144720] thermal_sys: Registered thermal governor 'fair_share'
[    0.144721] thermal_sys: Registered thermal governor 'bang_bang'
[    0.144721] thermal_sys: Registered thermal governor 'step_wise'
[    0.144722] thermal_sys: Registered thermal governor 'user_space'
[    0.144722] thermal_sys: Registered thermal governor 'power_allocator'
[    0.146327] cpuidle: using governor ladder
[    0.146327] cpuidle: using governor menu
[    0.146338] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.146338] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.146400] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.146403] PCI: not using MMCONFIG
[    0.146404] PCI: Using configuration type 1 for base access
[    0.146594] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.146600] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.153038] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.153041] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.153042] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.153043] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.153106] ACPI: Added _OSI(Module Device)
[    0.153106] ACPI: Added _OSI(Processor Device)
[    0.153106] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.153106] ACPI: Added _OSI(Processor Aggregator Device)
[    0.209650] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.217411] ACPI: Dynamic OEM Table Load:
[    0.217418] ACPI: SSDT 0xFFFF888101066800 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20200717)
[    0.218118] ACPI: Dynamic OEM Table Load:
[    0.218121] ACPI: SSDT 0xFFFF88810105E800 0006CB (v02 PmRef  Cpu0Ist  00003000 INTL 20200717)
[    0.218813] ACPI: Dynamic OEM Table Load:
[    0.218816] ACPI: SSDT 0xFFFF888102DA3400 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20200717)
[    0.218917] ACPI: Dynamic OEM Table Load:
[    0.218917] ACPI: SSDT 0xFFFF88810105A800 0004BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20200717)
[    0.218917] ACPI: Dynamic OEM Table Load:
[    0.218917] ACPI: SSDT 0xFFFF888101050000 001BAF (v02 PmRef  ApIst    00003000 INTL 20200717)
[    0.218917] ACPI: Dynamic OEM Table Load:
[    0.218917] ACPI: SSDT 0xFFFF888101056000 001038 (v02 PmRef  ApHwp    00003000 INTL 20200717)
[    0.223031] ACPI: Dynamic OEM Table Load:
[    0.223040] ACPI: SSDT 0xFFFF888101054000 001349 (v02 PmRef  ApPsd    00003000 INTL 20200717)
[    0.224497] ACPI: Dynamic OEM Table Load:
[    0.224503] ACPI: SSDT 0xFFFF88810139E000 000FBB (v02 PmRef  ApCst    00003000 INTL 20200717)
[    0.231842] ACPI: _OSC evaluated successfully for all CPUs
[    0.232918] ACPI: Interpreter enabled
[    0.232960] ACPI: PM: (supports S0 S3 S4 S5)
[    0.232961] ACPI: Using IOAPIC for interrupt routing
[    0.234054] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.235615] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[    0.235624] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.235625] PCI: Using E820 reservations for host bridge windows
[    0.236837] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.239506] ACPI: \_SB_.PC00.LPCB.UAR1.DRP1: New power resource
[    0.253570] ACPI: \_SB_.PC00.XHCI.RHUB.HS14.PRBT: New power resource
[    0.259946] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.267763] ACPI: \_TZ_.FN00: New power resource
[    0.267817] ACPI: \_TZ_.FN01: New power resource
[    0.267866] ACPI: \_TZ_.FN02: New power resource
[    0.267913] ACPI: \_TZ_.FN03: New power resource
[    0.267959] ACPI: \_TZ_.FN04: New power resource
[    0.268435] ACPI: \PIN_: New power resource
[    0.268763] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[    0.268767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.272059] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.272060] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.273482] PCI host bridge to bus 0000:00
[    0.273483] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.273485] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.273486] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.273487] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.273488] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[    0.273489] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.273490] pci_bus 0000:00: root bus resource [bus 00-e0]
[    0.273519] pci 0000:00:00.0: [8086:4668] type 00 class 0x060000
[    0.273611] pci 0000:00:01.0: [8086:460d] type 01 class 0x060400
[    0.273654] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.273669] pci 0000:00:01.0: PTM enabled (root), 4ns granularity
[    0.274216] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400
[    0.274260] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.274275] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[    0.274807] pci 0000:00:0a.0: [8086:467d] type 00 class 0x118000
[    0.274813] pci 0000:00:0a.0: reg 0x10: [mem 0x4014210000-0x4014217fff 64bit]
[    0.274828] pci 0000:00:0a.0: enabling Extended Tags
[    0.274924] pci 0000:00:0e.0: [8086:467f] type 00 class 0x010400
[    0.274936] pci 0000:00:0e.0: reg 0x10: [mem 0x4012000000-0x4013ffffff 64bit]
[    0.274942] pci 0000:00:0e.0: reg 0x18: [mem 0x80000000-0x81ffffff]
[    0.274955] pci 0000:00:0e.0: reg 0x20: [mem 0x4014100000-0x40141fffff 64bit]
[    0.275180] pci 0000:00:14.0: [8086:7ae0] type 00 class 0x0c0330
[    0.275197] pci 0000:00:14.0: reg 0x10: [mem 0x4014200000-0x401420ffff 64bit]
[    0.275265] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.275492] pci 0000:00:14.2: [8086:7aa7] type 00 class 0x050000
[    0.275511] pci 0000:00:14.2: reg 0x10: [mem 0x401421c000-0x401421ffff 64bit]
[    0.275522] pci 0000:00:14.2: reg 0x18: [mem 0x4014224000-0x4014224fff 64bit]
[    0.275726] pci 0000:00:15.0: [8086:7acc] type 00 class 0x0c8000
[    0.275753] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.276169] pci 0000:00:15.2: [8086:7ace] type 00 class 0x0c8000
[    0.276196] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.276542] pci 0000:00:16.0: [8086:7ae8] type 00 class 0x078000
[    0.276562] pci 0000:00:16.0: reg 0x10: [mem 0x4014221000-0x4014221fff 64bit]
[    0.276638] pci 0000:00:16.0: PME# supported from D3hot
[    0.277081] pci 0000:00:17.0: [8086:7ae2] type 00 class 0x010601
[    0.277092] pci 0000:00:17.0: reg 0x10: [mem 0x83f00000-0x83f01fff]
[    0.277098] pci 0000:00:17.0: reg 0x14: [mem 0x83f03000-0x83f030ff]
[    0.277103] pci 0000:00:17.0: reg 0x18: [io  0x6050-0x6057]
[    0.277108] pci 0000:00:17.0: reg 0x1c: [io  0x6040-0x6043]
[    0.277114] pci 0000:00:17.0: reg 0x20: [io  0x6020-0x603f]
[    0.277119] pci 0000:00:17.0: reg 0x24: [mem 0x83f02000-0x83f027ff]
[    0.277154] pci 0000:00:17.0: PME# supported from D3hot
[    0.277424] pci 0000:00:1a.0: [8086:7ac8] type 01 class 0x060400
[    0.277526] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.277564] pci 0000:00:1a.0: PTM enabled (root), 4ns granularity
[    0.278142] pci 0000:00:1b.0: [8086:7ac0] type 01 class 0x060400
[    0.278232] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.278780] pci 0000:00:1c.0: [8086:7ab8] type 01 class 0x060400
[    0.278860] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.279386] pci 0000:00:1c.2: [8086:7aba] type 01 class 0x060400
[    0.279480] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.279512] pci 0000:00:1c.2: PTM enabled (root), 4ns granularity
[    0.280069] pci 0000:00:1d.0: [8086:7ab4] type 01 class 0x060400
[    0.280171] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.280209] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.280784] pci 0000:00:1f.0: [8086:7a85] type 00 class 0x060100
[    0.281090] pci 0000:00:1f.3: [8086:7ad0] type 00 class 0x040300
[    0.281130] pci 0000:00:1f.3: reg 0x10: [mem 0x4014218000-0x401421bfff 64bit]
[    0.281182] pci 0000:00:1f.3: reg 0x20: [mem 0x4014000000-0x40140fffff 64bit]
[    0.281282] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.281744] pci 0000:00:1f.4: [8086:7aa3] type 00 class 0x0c0500
[    0.281767] pci 0000:00:1f.4: reg 0x10: [mem 0x4014220000-0x40142200ff 64bit]
[    0.281794] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.282008] pci 0000:00:1f.5: [8086:7aa4] type 00 class 0x0c8000
[    0.282025] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.282158] pci 0000:01:00.0: [10de:1fb1] type 00 class 0x030000
[    0.282168] pci 0000:01:00.0: reg 0x10: [mem 0x82000000-0x82ffffff]
[    0.282176] pci 0000:01:00.0: reg 0x14: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.282185] pci 0000:01:00.0: reg 0x1c: [mem 0x4010000000-0x4011ffffff 64bit pref]
[    0.282191] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
[    0.282196] pci 0000:01:00.0: reg 0x30: [mem 0x83000000-0x8307ffff pref]
[    0.282211] pci 0000:01:00.0: BAR 1: assigned to efifb
[    0.282245] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.282307] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.282538] pci 0000:01:00.1: [10de:10fa] type 00 class 0x040300
[    0.282547] pci 0000:01:00.1: reg 0x10: [mem 0x83080000-0x83083fff]
[    0.282650] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.282652] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.282653] pci 0000:00:01.0:   bridge window [mem 0x82000000-0x830fffff]
[    0.282656] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.282687] pci 0000:02:00.0: [144d:a80a] type 00 class 0x010802
[    0.282700] pci 0000:02:00.0: reg 0x10: [mem 0x83e00000-0x83e03fff 64bit]
[    0.282892] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.282894] pci 0000:00:06.0:   bridge window [mem 0x83e00000-0x83efffff]
[    0.282960] pci 0000:03:00.0: [144d:a809] type 00 class 0x010802
[    0.282983] pci 0000:03:00.0: reg 0x10: [mem 0x83d00000-0x83d03fff 64bit]
[    0.283290] pci 0000:00:1a.0: PCI bridge to [bus 03]
[    0.283294] pci 0000:00:1a.0:   bridge window [mem 0x83d00000-0x83dfffff]
[    0.283340] pci 0000:00:1b.0: PCI bridge to [bus 04]
[    0.283389] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.283392] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.283394] pci 0000:00:1c.0:   bridge window [mem 0x83100000-0x83afffff]
[    0.283453] pci 0000:06:00.0: [10ec:8125] type 00 class 0x020000
[    0.283471] pci 0000:06:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.283494] pci 0000:06:00.0: reg 0x18: [mem 0x83c00000-0x83c0ffff 64bit]
[    0.283509] pci 0000:06:00.0: reg 0x20: [mem 0x83c10000-0x83c13fff 64bit]
[    0.283634] pci 0000:06:00.0: supports D1 D2
[    0.283635] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.283875] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.283878] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.283880] pci 0000:00:1c.2:   bridge window [mem 0x83c00000-0x83cfffff]
[    0.283935] pci 0000:07:00.0: [144d:a808] type 00 class 0x010802
[    0.283957] pci 0000:07:00.0: reg 0x10: [mem 0x83b00000-0x83b03fff 64bit]
[    0.284266] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.284270] pci 0000:00:1d.0:   bridge window [mem 0x83b00000-0x83bfffff]
[    0.285715] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.285801] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.285887] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.285971] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.286056] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.286141] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.286225] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.286311] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.293577] iommu: Default domain type: Translated
[    0.293577] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.293577] SCSI subsystem initialized
[    0.293577] libata version 3.00 loaded.
[    0.293577] ACPI: bus type USB registered
[    0.293577] usbcore: registered new interface driver usbfs
[    0.293577] usbcore: registered new interface driver hub
[    0.293577] usbcore: registered new device driver usb
[    0.293577] pps_core: LinuxPPS API ver. 1 registered
[    0.293577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.293577] PTP clock support registered
[    0.293577] EDAC MC: Ver: 3.0.0
[    0.293577] efivars: Registered efivars operations
[    0.293577] NetLabel: Initializing
[    0.293577] NetLabel:  domain hash size = 128
[    0.293577] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.293577] NetLabel:  unlabeled traffic allowed by default
[    0.293577] mctp: management component transport protocol core
[    0.293577] NET: Registered PF_MCTP protocol family
[    0.293577] PCI: Using ACPI for IRQ routing
[    0.310367] PCI: pci_cache_line_size set to 64 bytes
[    0.310456] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.310534] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.310535] e820: reserve RAM buffer [mem 0x5ff20018-0x5fffffff]
[    0.310536] e820: reserve RAM buffer [mem 0x5ff2e018-0x5fffffff]
[    0.310537] e820: reserve RAM buffer [mem 0x67e4e000-0x67ffffff]
[    0.310537] e820: reserve RAM buffer [mem 0x67e9c000-0x67ffffff]
[    0.310538] e820: reserve RAM buffer [mem 0x6eec5000-0x6fffffff]
[    0.310538] e820: reserve RAM buffer [mem 0x71d68000-0x73ffffff]
[    0.310539] e820: reserve RAM buffer [mem 0x745cf000-0x77ffffff]
[    0.310539] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    0.312998] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.312998] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.312998] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.312998] vgaarb: loaded
[    0.313025] clocksource: Switched to clocksource tsc-early
[    0.314078] VFS: Disk quotas dquot_6.6.0
[    0.314086] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.314130] pnp: PnP ACPI init
[    0.314254] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.314614] pnp 00:01: [dma 0 disabled]
[    0.314716] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.314716] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.314784] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.315334] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.315335] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.315336] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.315336] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.315337] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.315338] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.315339] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.315339] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.315820] system 00:05: [io  0x2000-0x20fe] has been reserved
[    0.316318] pnp: PnP ACPI: found 7 devices
[    0.321391] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.321436] NET: Registered PF_INET protocol family
[    0.321623] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.323802] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.323837] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.324000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.324281] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.324361] TCP: Hash tables configured (established 262144 bind 65536)
[    0.324491] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.324568] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.324637] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.324697] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.324705] NET: Registered PF_XDP protocol family
[    0.324710] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000

Breizil29 · Message par **Breizil29** » dim. 17 déc. 2023, 20:09

Quand cela ne fonctionne pas
suite

Code : Tout sélectionner

[    0.324719] pci 0000:00:1c.0: BAR 15: assigned [mem 0x4014300000-0x40144fffff 64bit pref]
[    0.324721] pci 0000:00:15.0: BAR 0: assigned [mem 0x4014222000-0x4014222fff 64bit]
[    0.324776] pci 0000:00:15.2: BAR 0: assigned [mem 0x4014223000-0x4014223fff 64bit]
[    0.324795] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    0.324796] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    0.324798] pci 0000:00:1f.5: BAR 0: assigned [mem 0x83f04000-0x83f04fff]
[    0.324808] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.324809] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.324812] pci 0000:00:01.0:   bridge window [mem 0x82000000-0x830fffff]
[    0.324813] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.324815] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.324817] pci 0000:00:06.0:   bridge window [mem 0x83e00000-0x83efffff]
[    0.324821] pci 0000:00:1a.0: PCI bridge to [bus 03]
[    0.324827] pci 0000:00:1a.0:   bridge window [mem 0x83d00000-0x83dfffff]
[    0.324833] pci 0000:00:1b.0: PCI bridge to [bus 04]
[    0.324845] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.324847] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.324850] pci 0000:00:1c.0:   bridge window [mem 0x83100000-0x83afffff]
[    0.324853] pci 0000:00:1c.0:   bridge window [mem 0x4014300000-0x40144fffff 64bit pref]
[    0.324857] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.324859] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.324862] pci 0000:00:1c.2:   bridge window [mem 0x83c00000-0x83cfffff]
[    0.324868] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.324871] pci 0000:00:1d.0:   bridge window [mem 0x83b00000-0x83bfffff]
[    0.324877] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.324879] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.324880] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.324880] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
[    0.324881] pci_bus 0000:00: resource 8 [mem 0x80000000-0xbfffffff window]
[    0.324882] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    0.324883] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.324884] pci_bus 0000:01: resource 1 [mem 0x82000000-0x830fffff]
[    0.324885] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.324886] pci_bus 0000:02: resource 1 [mem 0x83e00000-0x83efffff]
[    0.324887] pci_bus 0000:03: resource 1 [mem 0x83d00000-0x83dfffff]
[    0.324888] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.324889] pci_bus 0000:05: resource 1 [mem 0x83100000-0x83afffff]
[    0.324889] pci_bus 0000:05: resource 2 [mem 0x4014300000-0x40144fffff 64bit pref]
[    0.324890] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.324891] pci_bus 0000:06: resource 1 [mem 0x83c00000-0x83cfffff]
[    0.324892] pci_bus 0000:07: resource 1 [mem 0x83b00000-0x83bfffff]
[    0.325296] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.325313] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.325331] PCI: CLS 64 bytes, default 64
[    0.325341] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.325342] software IO TLB: mapped [mem 0x000000006a409000-0x000000006e409000] (64MB)
[    0.325361] Trying to unpack rootfs image as initramfs...
[    0.325365] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3407c077a8d, max_idle_ns: 440795342283 ns
[    0.325558] clocksource: Switched to clocksource tsc
[    0.325572] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.337246] Initialise system trusted keyrings
[    0.337251] Key type blacklist registered
[    0.337272] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.337277] zbud: loaded
[    0.337360] integrity: Platform Keyring initialized
[    0.337361] integrity: Machine keyring initialized
[    0.340404] Key type asymmetric registered
[    0.340404] Asymmetric key parser 'x509' registered
[    0.340414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.340438] io scheduler mq-deadline registered
[    0.340439] io scheduler kyber registered
[    0.340443] io scheduler bfq registered
[    0.342295] pcieport 0000:00:01.0: PME: Signaling with IRQ 121
[    0.342324] pcieport 0000:00:01.0: AER: enabled with IRQ 121
[    0.342430] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
[    0.342454] pcieport 0000:00:06.0: AER: enabled with IRQ 122
[    0.342585] pcieport 0000:00:1a.0: PME: Signaling with IRQ 123
[    0.342619] pcieport 0000:00:1a.0: AER: enabled with IRQ 123
[    0.342722] pcieport 0000:00:1b.0: PME: Signaling with IRQ 124
[    0.342805] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
[    0.342817] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.342982] pcieport 0000:00:1c.2: PME: Signaling with IRQ 126
[    0.343022] pcieport 0000:00:1c.2: AER: enabled with IRQ 126
[    0.343169] pcieport 0000:00:1d.0: PME: Signaling with IRQ 127
[    0.343205] pcieport 0000:00:1d.0: AER: enabled with IRQ 127
[    0.343274] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.343717] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.343727] ACPI: button: Sleep Button [SLPB]
[    0.343739] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.343745] ACPI: button: Power Button [PWRB]
[    0.343758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.343785] ACPI: button: Power Button [PWRF]
[    0.346089] thermal LNXTHERM:00: registered as thermal_zone0
[    0.346090] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.346219] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.346498] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.348209] hpet_acpi_add: no address or irqs in _CRS
[    0.348245] Non-volatile memory driver v1.3
[    0.348246] Linux agpgart interface v0.103
[    0.354609] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.354808] ACPI: bus type drm_connector registered
[    0.355617] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.356466] fbcon: Deferring console take-over
[    0.356467] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.357503] ahci 0000:00:17.0: version 3.0
[    0.357511] ahci 0000:00:17.0: enabling device (0000 -> 0003)
[    0.367772] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf0 impl SATA mode
[    0.367783] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds
[    0.389763] Freeing initrd memory: 16004K
[    0.397114] scsi host0: ahci
[    0.397457] scsi host1: ahci
[    0.397681] scsi host2: ahci
[    0.397866] scsi host3: ahci
[    0.397916] scsi host4: ahci
[    0.398005] scsi host5: ahci
[    0.398041] scsi host6: ahci
[    0.398076] scsi host7: ahci
[    0.398088] ata1: DUMMY
[    0.398088] ata2: DUMMY
[    0.398089] ata3: DUMMY
[    0.398089] ata4: DUMMY
[    0.398095] ata5: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02300 irq 128
[    0.398096] ata6: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02380 irq 128
[    0.398098] ata7: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02400 irq 128
[    0.398099] ata8: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02480 irq 128
[    0.398157] usbcore: registered new interface driver usbserial_generic
[    0.398159] usbserial: USB Serial support registered for generic
[    0.398394] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.399307] rtc_cmos rtc_cmos: registered as rtc0
[    0.399488] rtc_cmos rtc_cmos: setting system clock to 2023-12-17T10:25:48 UTC (1702808748)
[    0.399520] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.400315] intel_pstate: Intel P-state driver initializing
[    0.402143] intel_pstate: HWP enabled
[    0.402300] ledtrig-cpu: registered to indicate activity on CPUs
[    0.402508] hid: raw HID events driver (C) Jiri Kosina
[    0.402556] intel_pmc_core INT33A1:00:  initialized
[    0.402660] drop_monitor: Initializing network drop monitor service
[    0.409002] Initializing XFRM netlink socket
[    0.409020] NET: Registered PF_INET6 protocol family
[    0.413032] Segment Routing with IPv6
[    0.413033] RPL Segment Routing with IPv6
[    0.413038] In-situ OAM (IOAM) with IPv6
[    0.413054] NET: Registered PF_PACKET protocol family
[    0.414737] microcode: Microcode Update Driver: v2.2.
[    0.414740] IPI shorthand broadcast: enabled
[    0.415752] sched_clock: Marking stable (408464920, 6270567)->(437723805, -22988318)
[    0.415929] registered taskstats version 1
[    0.416518] Loading compiled-in X.509 certificates
[    0.418207] Loaded X.509 cert 'Build time autogenerated kernel key: 4e79f1538f2635281648851308d72dbbab99fba9'
[    0.421748] zswap: loaded using pool zstd/zsmalloc
[    0.422524] Key type .fscrypt registered
[    0.422525] Key type fscrypt-provisioning registered
[    0.422754] integrity: Loading X.509 certificate: UEFI:db
[    0.422851] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    0.422851] integrity: Loading X.509 certificate: UEFI:db
[    0.422921] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    0.422921] integrity: Loading X.509 certificate: UEFI:db
[    0.422930] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.422930] integrity: Loading X.509 certificate: UEFI:db
[    0.422936] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.422937] integrity: Loading X.509 certificate: UEFI:db
[    0.423014] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.423786] PM:   Magic number: 3:748:426
[    0.423806] pcie_pme 0000:00:1c.2:pcie001: hash matches
[    0.426351] RAS: Correctable Errors collector initialized.
[    0.426384] clk: Disabling unused clocks
[    0.711078] ata7: SATA link down (SStatus 4 SControl 300)
[    0.711137] ata6: SATA link down (SStatus 4 SControl 300)
[    0.711192] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.711247] ata8: SATA link down (SStatus 4 SControl 300)
[    0.712930] ata5.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133
[    0.714885] ata5.00: configured for UDMA/133
[    0.717875] scsi 4:0:0:0: CD-ROM            ASUS     DRW-24D5MT       2.00 PQ: 0 ANSI: 5
[    0.744666] Freeing unused decrypted memory: 2028K
[    0.745131] Freeing unused kernel image (initmem) memory: 3412K
[    0.753140] Write protecting the kernel read-only data: 30720k
[    0.754422] Freeing unused kernel image (rodata/data gap) memory: 1264K
[    0.769124] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.769132] rodata_test: all tests were successful
[    0.769138] Run /init as init process
[    0.769140]   with arguments:
[    0.769141]     /init
[    0.769141]   with environment:
[    0.769142]     HOME=/
[    0.769142]     TERM=linux
[    0.769143]     BOOT_IMAGE=/boot/vmlinuz-linux
[    0.800757] fbcon: Taking over console
[    0.805228] Console: switching to colour frame buffer device 240x67
[    0.868067] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[    0.868070] pci_bus 10000:e0: root bus resource [bus e0-ff]
[    0.868071] pci_bus 10000:e0: root bus resource [mem 0x80000000-0x81ffffff]
[    0.868072] pci_bus 10000:e0: root bus resource [mem 0x4014102000-0x40141fffff 64bit]
[    0.869109] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.869113] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.870210] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.870451] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.870452] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.870454] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[    0.870518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.870520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870521] usb usb1: Product: xHCI Host Controller
[    0.870522] usb usb1: Manufacturer: Linux 6.6.7-arch1-1 xhci-hcd
[    0.870522] usb usb1: SerialNumber: 0000:00:14.0
[    0.870602] hub 1-0:1.0: USB hub found
[    0.870625] hub 1-0:1.0: 16 ports detected
[    0.873099] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    0.873101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.873102] usb usb2: Product: xHCI Host Controller
[    0.873102] usb usb2: Manufacturer: Linux 6.6.7-arch1-1 xhci-hcd
[    0.873103] usb usb2: SerialNumber: 0000:00:14.0
[    0.873147] hub 2-0:1.0: USB hub found
[    0.873161] hub 2-0:1.0: 10 ports detected
[    0.873278] sr 4:0:0:0: [sr0] scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.873280] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.873771] usb: port power management may be unreliable
[    0.873977] nvme 0000:07:00.0: platform quirk: setting simple suspend
[    0.873977] nvme 0000:03:00.0: platform quirk: setting simple suspend
[    0.873978] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    0.874039] nvme nvme2: pci function 0000:03:00.0
[    0.874040] nvme nvme1: pci function 0000:02:00.0
[    0.874040] nvme nvme0: pci function 0000:07:00.0
[    0.879942] nvme nvme0: missing or invalid SUBNQN field.
[    0.880046] nvme nvme0: Shutdown timeout set to 8 seconds
[    0.883508] vmd 0000:00:0e.0: Bound to PCI domain 10000
[    0.885367] nvme nvme1: Shutdown timeout set to 10 seconds
[    0.886890] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    0.887493] nvme nvme2: Shutdown timeout set to 8 seconds
[    0.889477] nvme nvme1: 20/0/0 default/read/poll queues
[    0.892233]  nvme1n1: p1 p2 p3
[    0.899304] nvme nvme0: 20/0/0 default/read/poll queues
[    0.903591]  nvme0n1: p1 p2 p3 p4
[    0.914614] nvme nvme2: allocated 64 MiB host memory buffer.
[    0.964006] nvme nvme2: 12/0/0 default/read/poll queues
[    0.975012]  nvme2n1: p1
[    1.019956] device-mapper: uevent: version 1.0.3
[    1.020022] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    1.126382] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.233197] EXT4-fs (dm-0): mounted filesystem 3b792f53-5c82-4495-81bb-156b567e019e r/w with ordered data mode. Quota mode: none.
[    1.267862] usb 1-2: config 1 has an invalid interface number: 2 but max is 1
[    1.267872] usb 1-2: config 1 has no interface number 1
[    1.268846] usb 1-2: New USB device found, idVendor=0b05, idProduct=19af, bcdDevice= 1.00
[    1.268852] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.268855] usb 1-2: Product: AURA LED Controller
[    1.268859] usb 1-2: Manufacturer: AsusTek Computer Inc.
[    1.268861] usb 1-2: SerialNumber: 9876543210
[    1.307946] systemd[1]: systemd 255-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    1.307954] systemd[1]: Detected architecture x86-64.
[    1.308724] systemd[1]: Hostname set to <Archlinux>.
[    1.389824] usb 2-10: new SuperSpeed USB device number 2 using xhci_hcd
[    1.409517] usb 2-10: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.00
[    1.409523] usb 2-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.409525] usb 2-10: Product: AS2107
[    1.409527] usb 2-10: Manufacturer: ASMedia
[    1.409528] usb 2-10: SerialNumber: 123456789088
[    1.410725] hub 2-10:1.0: USB hub found
[    1.410849] hub 2-10:1.0: 4 ports detected
[    1.529713] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.536816] systemd[1]: bpf-lsm: LSM BPF program attached
[    1.634434] systemd[1]: Queued start job for default target Graphical Interface.
[    1.678980] usb 1-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[    1.678993] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.678997] usb 1-4: Product: USB Receiver
[    1.679001] usb 1-4: Manufacturer: Logitech
[    1.685492] systemd[1]: Created slice Slice /system/getty.
[    1.686225] systemd[1]: Created slice Slice /system/modprobe.
[    1.686803] systemd[1]: Created slice Slice /system/systemd-fsck.
[    1.687231] systemd[1]: Created slice User and Session Slice.
[    1.687387] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.687518] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.687883] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.688015] systemd[1]: Reached target Local Encrypted Volumes.
[    1.688088] systemd[1]: Reached target Login Prompts.
[    1.688151] systemd[1]: Reached target Local Integrity Protected Volumes.
[    1.688230] systemd[1]: Reached target Path Units.
[    1.688302] systemd[1]: Reached target Remote File Systems.
[    1.688364] systemd[1]: Reached target Slice Units.
[    1.688425] systemd[1]: Reached target Swaps.
[    1.688499] systemd[1]: Reached target Local Verity Protected Volumes.
[    1.688660] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.689031] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.689569] systemd[1]: Listening on Process Core Dump Socket.
[    1.689627] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.689674] systemd[1]: Listening on Journal Socket.
[    1.689699] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.689737] systemd[1]: Listening on udev Control Socket.
[    1.689767] systemd[1]: Listening on udev Kernel Socket.
[    1.691389] systemd[1]: Mounting Huge Pages File System...
[    1.693015] systemd[1]: Mounting POSIX Message Queue File System...
[    1.694601] systemd[1]: Mounting Kernel Debug File System...
[    1.696091] systemd[1]: Mounting Kernel Trace File System...
[    1.699086] systemd[1]: Mounting Temporary Directory /tmp...
[    1.699588] systemd[1]: Starting Create List of Static Device Nodes...
[    1.699983] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    1.700402] systemd[1]: Starting Load Kernel Module configfs...
[    1.700826] systemd[1]: Starting Load Kernel Module dm_mod...
[    1.701435] systemd[1]: Starting Load Kernel Module drm...
[    1.701830] systemd[1]: Starting Load Kernel Module fuse...
[    1.703431] systemd[1]: Starting Load Kernel Module loop...
[    1.703552] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    1.705215] systemd[1]: Starting Journal Service...
[    1.705894] systemd[1]: Starting Load Kernel Modules...
[    1.705917] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.706251] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.706294] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.706645] systemd[1]: Starting Coldplug All udev Devices...
[    1.707235] systemd[1]: Mounted Huge Pages File System.
[    1.707395] systemd[1]: Mounted POSIX Message Queue File System.
[    1.707529] systemd[1]: Mounted Kernel Debug File System.
[    1.707654] systemd[1]: Mounted Kernel Trace File System.
[    1.707785] systemd[1]: Mounted Temporary Directory /tmp.
[    1.713983] loop: module loaded
[    1.717530] fuse: init (API version 7.39)
[    1.719678] systemd-journald[383]: Collecting audit messages is disabled.
[    1.749796] systemd[1]: Finished Create List of Static Device Nodes.
[    1.749808] EXT4-fs (dm-0): re-mounted 3b792f53-5c82-4495-81bb-156b567e019e r/w. Quota mode: none.
[    1.750181] systemd[1]: Started Journal Service.
[    1.806387] usb 1-10: new high-speed USB device number 4 using xhci_hcd
[    1.831815] nvidia: loading out-of-tree module taints kernel.
[    1.831822] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.868677] nvidia-nvlink: Nvlink Core is being initialized, major device number 236

[    1.869282] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[    1.911301] NVRM: loading NVIDIA UNIX Open Kernel Module for x86_64  545.29.06  Release Build  (archlinux-builder@)
[    1.948723] usb 1-10: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.00
[    1.948725] usb 1-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.948726] usb 1-10: Product: AS2107
[    1.948727] usb 1-10: Manufacturer: ASMedia
[    1.948728] usb 1-10: SerialNumber: 123456789088
[    1.949754] hub 1-10:1.0: USB hub found
[    1.949900] hub 1-10:1.0: 4 ports detected
[    2.023134] nvidia-uvm: Loaded the UVM driver, major device number 234.
[    2.039921] vboxdrv: Found 20 processor cores/threads
[    2.043539] systemd-journald[383]: Received client request to flush runtime journal.
[    2.066510] vboxdrv: TSC mode is Invariant, tentative frequency 3609593220 Hz
[    2.066513] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
[    2.066859] systemd-journald[383]: /var/log/journal/a3482dfc931d40dda0e6ebaad4b5b0f1/system.journal: Journal file uses a different sequence number ID, rotating.
[    2.066862] systemd-journald[383]: Rotating system journal.
[    2.068965] VBoxNetAdp: Successfully started.
[    2.072341] VBoxNetFlt: Successfully started.
[    2.076300] usb 1-12: new full-speed USB device number 5 using xhci_hcd
[    2.222043] usb 1-12: New USB device found, idVendor=3434, idProduct=0109, bcdDevice= 2.04
[    2.222057] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.222061] usb 1-12: Product: Keychron Q1
[    2.222065] usb 1-12: Manufacturer: Keychron
[    2.346385] usb 1-13: new high-speed USB device number 6 using xhci_hcd
[    2.451438] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    2.453738] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.453796] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.455258] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    2.455972] i2c i2c-0: Successfully instantiated SPD at 0x51
[    2.456827] i2c i2c-0: Successfully instantiated SPD at 0x53
[    2.457158] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.460824] spi-nor spi0.0: s25fl064k (8192 Kbytes)
[    2.462872] Creating 1 MTD partitions on "0000:00:1f.5":
[    2.462874] 0x000000000000-0x000001800000 : "BIOS"
[    2.462876] mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x800000
[    2.463918] spi-nor spi0.1: mx25l12805d (16384 Kbytes)
[    2.464212] i8042: PNP: No PS/2 controller found.
[    2.468719] r8169 0000:06:00.0: enabling device (0000 -> 0003)
[    2.468981] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.469075] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.469114] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.469495] iTCO_vendor_support: vendor-support=0
[    2.472033] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    2.472312] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.473464] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    2.473537] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.473787] asus_wmi: ASUS WMI generic driver loaded
[    2.475624] asus_wmi: Initialization: 0x0
[    2.475711] asus_wmi: BIOS WMI version: 0.0
[    2.475812] asus_wmi: SFUN value: 0x0
[    2.475813] eeepc-wmi eeepc-wmi: Detected AsusMbSwInterface, not ASUSWMI, use DSTS
[    2.476399] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[    2.476401] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.476401] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.477496] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
[    2.479879] cryptd: max_cpu_qlen set to 1000
[    2.488189] r8169 0000:06:00.0 eth0: RTL8125B, 04:42:1a:97:b5:cd, XID 641, IRQ 205
[    2.488193] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.492982] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
[    2.493312] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    2.493367] usb 1-13: New USB device found, idVendor=31e9, idProduct=0002, bcdDevice= 1.10
[    2.493369] usb 1-13: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.493369] usb 1-13: Product: SSL 2+
[    2.493370] usb 1-13: Manufacturer: Solid State Logic
[    2.593617] AVX2 version of gcm_enc/dec engaged.
[    2.594610] AES CTR mode by8 optimization enabled
[    2.594754] hid-generic 0003:0B05:19AF.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:00:14.0-2/input2
[    2.595189] mc: Linux media interface: v0.10
[    2.596642] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C52B.0002/input/input5
[    2.599058] r8169 0000:06:00.0 enp6s0: renamed from eth0
[    2.613671] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.614235] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    2.614397] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.614412] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.615972] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for x86_64  545.29.06  Release Build  (archlinux-builder@)
[    2.622432] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    2.622434] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    2.642229] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[    2.642553] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.642558] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.642560] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.642562] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.642563] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    2.642564] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.642565] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.642567] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.642568] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.656390] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    2.656407] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    2.656425] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[    2.656441] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[    2.659351] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input10
[    2.659378] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input11
[    2.674708] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    2.701058] intel_tcc_cooling: Programmable TCC Offset detected
[    2.708768] intel_rapl_msr: PL4 support detected.
[    2.708782] intel_rapl_common: Found RAPL domain package
[    2.708783] intel_rapl_common: Found RAPL domain core
[    2.713053] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input12
[    2.713110] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    2.713166] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    2.713167] hid-generic 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    2.713203] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    2.713264] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    2.715823] hid-generic 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[    2.716373] input: Keychron Keychron Q1 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:3434:0109.0005/input/input19
[    2.734871] EXT4-fs (dm-1): mounted filesystem 7c1dd610-f0d1-43b4-a0b4-3ba1d81f0db6 r/w with ordered data mode. Quota mode: none.
[    2.776774] hid-generic 0003:3434:0109.0005: input,hidraw4: USB HID v1.11 Keyboard [Keychron Keychron Q1] on usb-0000:00:14.0-12/input0
[    2.777406] hid-generic 0003:3434:0109.0006: hiddev99,hidraw5: USB HID v1.11 Device [Keychron Keychron Q1] on usb-0000:00:14.0-12/input1
[    2.778570] input: Keychron Keychron Q1 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input20
[    2.778697] input: Keychron Keychron Q1 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input21
[    2.825888] usb 1-13: Quirk or no altest; falling back to MIDI 1.0
[    2.826884] usbcore: registered new interface driver snd-usb-audio
[    2.833072] input: Keychron Keychron Q1 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input22
[    2.833144] input: Keychron Keychron Q1 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input23
[    2.833323] hid-generic 0003:3434:0109.0007: input,hidraw6: USB HID v1.11 Mouse [Keychron Keychron Q1] on usb-0000:00:14.0-12/input2
[    2.833343] usbcore: registered new interface driver usbhid
[    2.833343] usbhid: USB HID core driver
[    3.057049] mousedev: PS/2 mouse device common for all mice
[    3.274973] logitech-djreceiver 0003:046D:C52B.0004: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[    3.392610] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input24
[    3.395999] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input25
[    3.396309] hid-generic 0003:046D:406F.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:14.0-4/input2:2
[    3.399654] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
[    3.589901] r8169 0000:06:00.0 enp6s0: Link is Down
[    3.666259] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input29
[    3.667180] logitech-hidpp-device 0003:046D:406F.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-4/input2:2
[    4.222516] ACPI Warning: \_SB.PC00.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230628/nsarguments-61)
[    6.453487] Xorg[809]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[    7.307212] simple-framebuffer simple-framebuffer.0: swiotlb buffer is full (sz: 917504 bytes), total 32768 (slots), used 194 (slots)
[    7.770733] rfkill: input handler disabled
[  430.660037] logitech-hidpp-device 0003:046D:406F.0008: HID++ 4.5 device connected.
[  434.945961] systemd-journald[383]: /var/log/journal/a3482dfc931d40dda0e6ebaad4b5b0f1/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[  435.718664] rfkill: input handler enabled
[  437.150372] simple-framebuffer simple-framebuffer.0: swiotlb buffer is full (sz: 1241088 bytes), total 32768 (slots), used 138 (slots)
[  437.642567] rfkill: input handler disabled
[  440.314717] ISO 9660 Extensions: Microsoft Joliet Level 3
[  440.379064] ISOFS: changing to secondary root

Breizil29 · Message par **Breizil29** » dim. 17 déc. 2023, 20:14

Quand cela fonctionne

Code : Tout sélectionner

➜ sudo dmesg
[    0.000000] Linux version 6.6.7-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Thu, 14 Dec 2023 03:45:42 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/rootvg-rootlv rw loglevel=3
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000067e4dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000067e4e000-0x0000000067e4efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000067e4f000-0x0000000067e9bfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000067e9c000-0x0000000067e9cfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000067e9d000-0x00000000745cefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000745cf000-0x00000000782cefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000782cf000-0x000000007851efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007851f000-0x000000007871efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007871f000-0x0000000079ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079fff000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007dffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ee00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0x5ff2d018-0x5ff4cc57] usable ==> usable
[    0.000000] e820: update [mem 0x5ff2d018-0x5ff4cc57] usable ==> usable
[    0.000000] e820: update [mem 0x5ff1f018-0x5ff2c857] usable ==> usable
[    0.000000] e820: update [mem 0x5ff1f018-0x5ff2c857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000005ff1f017] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff1f018-0x000000005ff2c857] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff2c858-0x000000005ff2d017] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff2d018-0x000000005ff4cc57] usable
[    0.000000] reserve setup_data: [mem 0x000000005ff4cc58-0x0000000067e4dfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000067e4e000-0x0000000067e4efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000067e4f000-0x0000000067e9bfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000067e9c000-0x0000000067e9cfff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000067e9d000-0x00000000745cefff] usable
[    0.000000] reserve setup_data: [mem 0x00000000745cf000-0x00000000782cefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000782cf000-0x000000007851efff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007851f000-0x000000007871efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007871f000-0x0000000079ffefff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000079fff000-0x0000000079ffffff] usable
[    0.000000] reserve setup_data: [mem 0x000000007a000000-0x000000007dffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007ee00000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000087fffffff] usable
[    0.000000] efi: EFI v2.8 by American Megatrends
[    0.000000] efi: ACPI=0x7851e000 ACPI 2.0=0x7851e014 TPMFinalLog=0x7864c000 SMBIOS=0x79d1d000 SMBIOS 3.0=0x79d1c000 MEMATTR=0x6fefe418 ESRT=0x71d68698 INITRD=0x623c6998 RNG=0x7848cc18 TPMEventLog=0x623bb018
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem83: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
[    0.000000] efi: Not removing mem84: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem85: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem86: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem88: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem89: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.4.0 present.
[    0.000000] DMI: ASUS System Product Name/PRIME H670-PLUS D4, BIOS 1620 08/12/2022
[    0.000000] tsc: Detected 3600.000 MHz processor
[    0.000000] tsc: Detected 3609.600 MHz TSC
[    0.000354] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000356] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000361] last_pfn = 0x880000 max_arch_pfn = 0x400000000
[    0.000363] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000364] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000732] last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.004658] esrt: Reserving ESRT space from 0x0000000071d68698 to 0x0000000071d68720.
[    0.004662] e820: update [mem 0x71d68000-0x71d68fff] usable ==> reserved
[    0.004672] Using GB pages for direct mapping
[    0.004673] Incomplete global flushes, disabling PCID
[    0.004957] Secure boot disabled
[    0.004957] RAMDISK: [mem 0x5de15000-0x5edb5fff]
[    0.004958] ACPI: Early table checksum verification disabled
[    0.004961] ACPI: RSDP 0x000000007851E014 000024 (v02 ALASKA)
[    0.004964] ACPI: XSDT 0x000000007851D728 000124 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004967] ACPI: FACP 0x000000007851B000 000114 (v06 ALASKA A M I    01072009 AMI  01000013)
[    0.004971] ACPI: DSDT 0x00000000784A2000 0783DF (v02 ALASKA A M I    01072009 INTL 20200717)
[    0.004973] ACPI: FACS 0x000000007871E000 000040
[    0.004974] ACPI: MCFG 0x000000007851C000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.004976] ACPI: FIDT 0x00000000784A1000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004978] ACPI: FPDT 0x0000000078390000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004979] ACPI: SSDT 0x000000007849F000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[    0.004981] ACPI: SSDT 0x0000000078499000 005D0B (v02 CpuRef CpuSsdt  00003000 INTL 20200717)
[    0.004983] ACPI: SSDT 0x0000000078496000 002AA1 (v02 SaSsdt SaSsdt   00003000 INTL 20200717)
[    0.004984] ACPI: SSDT 0x0000000078492000 003339 (v02 INTEL  IgfxSsdt 00003000 INTL 20200717)
[    0.004986] ACPI: HPET 0x0000000078491000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004988] ACPI: APIC 0x0000000078490000 0001DC (v05 ALASKA A M I    01072009 AMI  01000013)
[    0.004989] ACPI: MCFG 0x000000007848F000 00003C (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004991] ACPI: SSDT 0x000000007848D000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
[    0.004993] ACPI: NHLT 0x000000007848B000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.004994] ACPI: LPIT 0x000000007848A000 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004996] ACPI: SSDT 0x0000000078486000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
[    0.004997] ACPI: SSDT 0x0000000078483000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
[    0.004999] ACPI: DBGP 0x0000000078482000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.005001] ACPI: DBG2 0x0000000078481000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.005002] ACPI: SSDT 0x0000000078480000 000C1F (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[    0.005004] ACPI: DMAR 0x000000007847F000 000050 (v02 INTEL  EDK2     00000002      01000013)
[    0.005006] ACPI: SSDT 0x000000007847D000 001DA0 (v02 INTEL  xh_adls3 00000000 INTL 20200717)
[    0.005007] ACPI: SSDT 0x0000000078479000 003AEA (v02 SocGpe SocGpe   00003000 INTL 20200717)
[    0.005009] ACPI: SSDT 0x0000000078475000 0039DA (v02 SocCmn SocCmn   00003000 INTL 20200717)
[    0.005011] ACPI: SSDT 0x0000000078474000 000144 (v02 Intel  ADebTabl 00001000 INTL 20200717)
[    0.005012] ACPI: BGRT 0x0000000078473000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005014] ACPI: UEFI 0x000000007858E000 00063A (v01 INTEL  RstVmdE  00000000 INTL 00000000)
[    0.005016] ACPI: UEFI 0x000000007858D000 00005C (v01 INTEL  RstVmdV  00000000 INTL 00000000)
[    0.005017] ACPI: WPBT 0x0000000078394000 000040 (v01 ALASKA A M I    00000001 ASUS 00000001)
[    0.005019] ACPI: TPM2 0x0000000078393000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.005021] ACPI: BERT 0x0000000078392000 000030 (v01 INTEL  EDK2     00000001 INTL 00000001)
[    0.005022] ACPI: PHAT 0x0000000078391000 0005F1 (v01 ALASKA A M I    00000005 MSFT 0100000D)
[    0.005024] ACPI: WSMT 0x0000000078489000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005025] ACPI: Reserving FACP table memory at [mem 0x7851b000-0x7851b113]
[    0.005026] ACPI: Reserving DSDT table memory at [mem 0x784a2000-0x7851a3de]
[    0.005027] ACPI: Reserving FACS table memory at [mem 0x7871e000-0x7871e03f]
[    0.005027] ACPI: Reserving MCFG table memory at [mem 0x7851c000-0x7851c03b]
[    0.005028] ACPI: Reserving FIDT table memory at [mem 0x784a1000-0x784a109b]
[    0.005028] ACPI: Reserving FPDT table memory at [mem 0x78390000-0x78390043]
[    0.005028] ACPI: Reserving SSDT table memory at [mem 0x7849f000-0x7849f38b]
[    0.005029] ACPI: Reserving SSDT table memory at [mem 0x78499000-0x7849ed0a]
[    0.005029] ACPI: Reserving SSDT table memory at [mem 0x78496000-0x78498aa0]
[    0.005030] ACPI: Reserving SSDT table memory at [mem 0x78492000-0x78495338]
[    0.005030] ACPI: Reserving HPET table memory at [mem 0x78491000-0x78491037]
[    0.005031] ACPI: Reserving APIC table memory at [mem 0x78490000-0x784901db]
[    0.005031] ACPI: Reserving MCFG table memory at [mem 0x7848f000-0x7848f03b]
[    0.005031] ACPI: Reserving SSDT table memory at [mem 0x7848d000-0x7848ef19]
[    0.005032] ACPI: Reserving NHLT table memory at [mem 0x7848b000-0x7848b02c]
[    0.005032] ACPI: Reserving LPIT table memory at [mem 0x7848a000-0x7848a0cb]
[    0.005033] ACPI: Reserving SSDT table memory at [mem 0x78486000-0x78488356]
[    0.005033] ACPI: Reserving SSDT table memory at [mem 0x78483000-0x78485a82]
[    0.005034] ACPI: Reserving DBGP table memory at [mem 0x78482000-0x78482033]
[    0.005034] ACPI: Reserving DBG2 table memory at [mem 0x78481000-0x78481053]
[    0.005034] ACPI: Reserving SSDT table memory at [mem 0x78480000-0x78480c1e]
[    0.005035] ACPI: Reserving DMAR table memory at [mem 0x7847f000-0x7847f04f]
[    0.005035] ACPI: Reserving SSDT table memory at [mem 0x7847d000-0x7847ed9f]
[    0.005036] ACPI: Reserving SSDT table memory at [mem 0x78479000-0x7847cae9]
[    0.005036] ACPI: Reserving SSDT table memory at [mem 0x78475000-0x784789d9]
[    0.005037] ACPI: Reserving SSDT table memory at [mem 0x78474000-0x78474143]
[    0.005037] ACPI: Reserving BGRT table memory at [mem 0x78473000-0x78473037]
[    0.005037] ACPI: Reserving UEFI table memory at [mem 0x7858e000-0x7858e639]
[    0.005038] ACPI: Reserving UEFI table memory at [mem 0x7858d000-0x7858d05b]
[    0.005038] ACPI: Reserving WPBT table memory at [mem 0x78394000-0x7839403f]
[    0.005039] ACPI: Reserving TPM2 table memory at [mem 0x78393000-0x7839304b]
[    0.005039] ACPI: Reserving BERT table memory at [mem 0x78392000-0x7839202f]
[    0.005040] ACPI: Reserving PHAT table memory at [mem 0x78391000-0x783915f0]
[    0.005040] ACPI: Reserving WSMT table memory at [mem 0x78489000-0x78489027]
[    0.005196] No NUMA configuration found
[    0.005197] Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
[    0.005198] NODE_DATA(0) allocated [mem 0x87fffb000-0x87fffffff]
[    0.005220] Zone ranges:
[    0.005220]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005222]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.005222]   Normal   [mem 0x0000000100000000-0x000000087fffffff]
[    0.005223]   Device   empty
[    0.005224] Movable zone start for each node
[    0.005224] Early memory node ranges
[    0.005224]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.005225]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.005226]   node   0: [mem 0x0000000000100000-0x0000000067e4dfff]
[    0.005226]   node   0: [mem 0x0000000067e4f000-0x0000000067e9bfff]
[    0.005226]   node   0: [mem 0x0000000067e9d000-0x00000000745cefff]
[    0.005227]   node   0: [mem 0x0000000079fff000-0x0000000079ffffff]
[    0.005227]   node   0: [mem 0x0000000100000000-0x000000087fffffff]
[    0.005228] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
[    0.005231] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.005232] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.005251] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.007459] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.007722] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.007864] On node 0, zone DMA32: 23088 pages in unavailable ranges
[    0.048906] On node 0, zone Normal: 24576 pages in unavailable ranges
[    0.049338] ACPI: PM-Timer IO Port: 0x1808
[    0.049343] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.049344] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.049344] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.049345] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.049345] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.049345] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.049346] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.049346] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.049346] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.049347] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.049347] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.049347] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.049348] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.049348] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.049348] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.049349] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.049349] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.049349] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.049350] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.049350] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.049350] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[    0.049351] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[    0.049351] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[    0.049352] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.049392] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.049394] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.049395] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.049397] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.049398] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.049403] e820: update [mem 0x6eec5000-0x6efb8fff] usable ==> reserved
[    0.049410] TSC deadline timer available
[    0.049411] smpboot: Allowing 20 CPUs, 0 hotplug CPUs
[    0.049421] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.049422] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.049423] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.049424] PM: hibernation: Registered nosave memory: [mem 0x5ff1f000-0x5ff1ffff]
[    0.049425] PM: hibernation: Registered nosave memory: [mem 0x5ff2c000-0x5ff2cfff]
[    0.049425] PM: hibernation: Registered nosave memory: [mem 0x5ff2d000-0x5ff2dfff]
[    0.049426] PM: hibernation: Registered nosave memory: [mem 0x5ff4c000-0x5ff4cfff]
[    0.049427] PM: hibernation: Registered nosave memory: [mem 0x67e4e000-0x67e4efff]
[    0.049428] PM: hibernation: Registered nosave memory: [mem 0x67e9c000-0x67e9cfff]
[    0.049428] PM: hibernation: Registered nosave memory: [mem 0x6eec5000-0x6efb8fff]
[    0.049429] PM: hibernation: Registered nosave memory: [mem 0x71d68000-0x71d68fff]
[    0.049430] PM: hibernation: Registered nosave memory: [mem 0x745cf000-0x782cefff]
[    0.049430] PM: hibernation: Registered nosave memory: [mem 0x782cf000-0x7851efff]
[    0.049430] PM: hibernation: Registered nosave memory: [mem 0x7851f000-0x7871efff]
[    0.049431] PM: hibernation: Registered nosave memory: [mem 0x7871f000-0x79ffefff]
[    0.049431] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7dffffff]
[    0.049432] PM: hibernation: Registered nosave memory: [mem 0x7e000000-0x7edfffff]
[    0.049432] PM: hibernation: Registered nosave memory: [mem 0x7ee00000-0x7fffffff]
[    0.049432] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xfdffffff]
[    0.049433] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.049433] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.049433] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.049434] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.049434] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.049434] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[    0.049435] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.049435] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[    0.049435] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.049435] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.049436] [mem 0x80000000-0xfdffffff] available for PCI devices
[    0.049437] Booting paravirtualized kernel on bare hardware
[    0.049439] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.052618] setup_percpu: NR_CPUS:320 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
[    0.053382] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.053386] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.053387] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.053391] pcpu-alloc: [0] 16 17 18 19 -- -- -- --
[    0.053401] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/rootvg-rootlv rw loglevel=3
[    0.053425] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.053432] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.053432] printk: log_buf_len total cpu_extra contributions: 77824 bytes
[    0.053433] printk: log_buf_len min size: 131072 bytes
[    0.053547] printk: log_buf_len: 262144 bytes
[    0.053548] printk: early log buf free: 111624(85%)
[    0.056269] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.057654] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.057752] Fallback order for Node 0: 0
[    0.057754] Built 1 zonelists, mobility grouping on.  Total pages: 8210358
[    0.057756] Policy zone: Normal
[    0.057958] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.057965] software IO TLB: area num 32.
[    0.116410] Memory: 32548556K/33363376K available (16384K kernel code, 2132K rwdata, 13072K rodata, 3412K init, 3840K bss, 814564K reserved, 0K cma-reserved)
[    0.116557] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
[    0.116577] ftrace: allocating 48807 entries in 191 pages
[    0.121184] ftrace: allocated 191 pages with 7 groups
[    0.121240] Dynamic Preempt: full
[    0.121287] rcu: Preemptible hierarchical RCU implementation.
[    0.121288] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=20.
[    0.121289] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.121289]  Trampoline variant of Tasks RCU enabled.
[    0.121290]  Rude variant of Tasks RCU enabled.
[    0.121290]  Tracing variant of Tasks RCU enabled.
[    0.121290] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.121291] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
[    0.122571] NR_IRQS: 20736, nr_irqs: 2216, preallocated irqs: 16
[    0.122856] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.123093] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.123120] Console: colour dummy device 80x25
[    0.123122] printk: console [tty0] enabled
[    0.123150] ACPI: Core revision 20230628
[    0.123350] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.123351] APIC: Switch to symmetric I/O mode setup
[    0.123352] DMAR: Host address width 39
[    0.123353] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.123358] DMAR: dmar0: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[    0.123360] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 0
[    0.123361] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.123361] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.124783] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.124784] x2apic enabled
[    0.124832] APIC: Switched APIC routing to: cluster x2apic
[    0.129232] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3407c077a8d, max_idle_ns: 440795342283 ns
[    0.129236] Calibrating delay loop (skipped), value calculated using timer frequency.. 7222.00 BogoMIPS (lpj=12032000)
[    0.129281] CPU0: Thermal monitoring enabled (TM1)
[    0.129283] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.129380] process: using mwait in idle threads
[    0.129381] CET detected: Indirect Branch Tracking enabled
[    0.129382] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.129383] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.129385] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.129386] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.129386] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.129387] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.129387] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.129388] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.129395] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.129395] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.129396] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.129396] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.129397] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    0.129397] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.129398] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.129398] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
[    0.129399] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[    0.132568] Freeing SMP alternatives memory: 40K
[    0.132568] pid_max: default: 32768 minimum: 301
[    0.132568] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.132568] landlock: Up and running.
[    0.132568] Yama: becoming mindful.
[    0.132568] LSM support for eBPF active
[    0.132568] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.132568] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.132568] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i7-12700KF (family: 0x6, model: 0x97, stepping: 0x2)
[    0.132568] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.132568] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.132568] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.132568] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.132568] core: cpu_core PMU driver:
[    0.132568] ... version:                5
[    0.132568] ... bit width:              48
[    0.132568] ... generic registers:      8
[    0.132568] ... value mask:             0000ffffffffffff
[    0.132568] ... max period:             00007fffffffffff
[    0.132568] ... fixed-purpose events:   4
[    0.132568] ... event mask:             0001000f000000ff
[    0.132568] signal: max sigframe size: 3632
[    0.132568] Estimated ratio of average max frequency by base frequency (times 1024): 1393
[    0.132568] rcu: Hierarchical SRCU implementation.
[    0.132568] rcu:     Max phase no-delay instances is 1000.
[    0.132568] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.132568] smp: Bringing up secondary CPUs ...
[    0.132568] smpboot: x86: Booting SMP configuration:
[    0.132568] .... node  #0, CPUs:        #2  #4  #6  #8 #10 #12 #14 #16 #17 #18 #19
[    0.009532] core: cpu_atom PMU driver: PEBS-via-PT
[    0.009532] ... version:                5
[    0.009532] ... bit width:              48
[    0.009532] ... generic registers:      6
[    0.009532] ... value mask:             0000ffffffffffff
[    0.009532] ... max period:             00007fffffffffff
[    0.009532] ... fixed-purpose events:   3
[    0.009532] ... event mask:             000000070000003f
[    0.133164]   #1  #3  #5  #7  #9 #11 #13 #15
[    0.139262] smp: Brought up 1 node, 20 CPUs
[    0.139262] smpboot: Max logical packages: 1
[    0.139262] smpboot: Total of 20 processors activated (144441.00 BogoMIPS)
[    0.143165] devtmpfs: initialized
[    0.143165] x86/mm: Memory block size: 128MB
[    0.143463] ACPI: PM: Registering ACPI NVS region [mem 0x7851f000-0x7871efff] (2097152 bytes)
[    0.143463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.143463] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.143463] pinctrl core: initialized pinctrl subsystem
[    0.143463] PM: RTC time: 08:36:34, date: 2023-12-17
[    0.143463] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.143491] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.143811] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.144206] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.144218] audit: initializing netlink subsys (disabled)
[    0.144251] audit: type=2000 audit(1702802194.013:1): state=initialized audit_enabled=0 res=1
[    0.144293] thermal_sys: Registered thermal governor 'fair_share'
[    0.144294] thermal_sys: Registered thermal governor 'bang_bang'
[    0.144295] thermal_sys: Registered thermal governor 'step_wise'
[    0.144295] thermal_sys: Registered thermal governor 'user_space'
[    0.144295] thermal_sys: Registered thermal governor 'power_allocator'
[    0.144305] cpuidle: using governor ladder
[    0.145909] cpuidle: using governor menu
[    0.145923] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.145923] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.145986] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.145990] PCI: not using MMCONFIG
[    0.145990] PCI: Using configuration type 1 for base access
[    0.146183] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.146188] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.149262] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.149262] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.149262] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.149262] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.149315] ACPI: Added _OSI(Module Device)
[    0.149316] ACPI: Added _OSI(Processor Device)
[    0.149317] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.149318] ACPI: Added _OSI(Processor Aggregator Device)
[    0.225434] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.235942] ACPI: Dynamic OEM Table Load:
[    0.235950] ACPI: SSDT 0xFFFF888101392400 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20200717)
[    0.236869] ACPI: Dynamic OEM Table Load:
[    0.236874] ACPI: SSDT 0xFFFF8881027F0000 0006CB (v02 PmRef  Cpu0Ist  00003000 INTL 20200717)
[    0.237824] ACPI: Dynamic OEM Table Load:
[    0.237829] ACPI: SSDT 0xFFFF88810273F600 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20200717)
[    0.238683] ACPI: Dynamic OEM Table Load:
[    0.238687] ACPI: SSDT 0xFFFF8881027F0800 0004BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20200717)
[    0.239897] ACPI: Dynamic OEM Table Load:
[    0.239905] ACPI: SSDT 0xFFFF888101388000 001BAF (v02 PmRef  ApIst    00003000 INTL 20200717)
[    0.241456] ACPI: Dynamic OEM Table Load:
[    0.241462] ACPI: SSDT 0xFFFF8881027FA000 001038 (v02 PmRef  ApHwp    00003000 INTL 20200717)
[    0.242810] ACPI: Dynamic OEM Table Load:
[    0.242816] ACPI: SSDT 0xFFFF8881027FE000 001349 (v02 PmRef  ApPsd    00003000 INTL 20200717)
[    0.244219] ACPI: Dynamic OEM Table Load:
[    0.244224] ACPI: SSDT 0xFFFF88810139B000 000FBB (v02 PmRef  ApCst    00003000 INTL 20200717)
[    0.251597] ACPI: _OSC evaluated successfully for all CPUs
[    0.252687] ACPI: Interpreter enabled
[    0.252729] ACPI: PM: (supports S0 S3 S4 S5)
[    0.252730] ACPI: Using IOAPIC for interrupt routing
[    0.253844] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.255414] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[    0.255423] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.255424] PCI: Using E820 reservations for host bridge windows
[    0.256644] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.259347] ACPI: \_SB_.PC00.LPCB.UAR1.DRP1: New power resource
[    0.273590] ACPI: \_SB_.PC00.XHCI.RHUB.HS14.PRBT: New power resource
[    0.280081] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.288033] ACPI: \_TZ_.FN00: New power resource
[    0.288084] ACPI: \_TZ_.FN01: New power resource
[    0.288133] ACPI: \_TZ_.FN02: New power resource
[    0.288181] ACPI: \_TZ_.FN03: New power resource
[    0.288229] ACPI: \_TZ_.FN04: New power resource
[    0.288707] ACPI: \PIN_: New power resource
[    0.289039] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[    0.289044] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.292334] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.292336] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.293777] PCI host bridge to bus 0000:00
[    0.293778] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.293780] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.293781] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.293783] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.293784] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[    0.293785] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.293786] pci_bus 0000:00: root bus resource [bus 00-e0]
[    0.293815] pci 0000:00:00.0: [8086:4668] type 00 class 0x060000
[    0.293909] pci 0000:00:01.0: [8086:460d] type 01 class 0x060400
[    0.293951] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.293966] pci 0000:00:01.0: PTM enabled (root), 4ns granularity
[    0.294521] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400
[    0.294566] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.294580] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[    0.295121] pci 0000:00:0a.0: [8086:467d] type 00 class 0x118000
[    0.295128] pci 0000:00:0a.0: reg 0x10: [mem 0x4014210000-0x4014217fff 64bit]
[    0.295142] pci 0000:00:0a.0: enabling Extended Tags
[    0.295242] pci 0000:00:0e.0: [8086:467f] type 00 class 0x010400
[    0.295254] pci 0000:00:0e.0: reg 0x10: [mem 0x4012000000-0x4013ffffff 64bit]
[    0.295259] pci 0000:00:0e.0: reg 0x18: [mem 0x80000000-0x81ffffff]
[    0.295273] pci 0000:00:0e.0: reg 0x20: [mem 0x4014100000-0x40141fffff 64bit]
[    0.295506] pci 0000:00:14.0: [8086:7ae0] type 00 class 0x0c0330
[    0.295522] pci 0000:00:14.0: reg 0x10: [mem 0x4014200000-0x401420ffff 64bit]
[    0.295590] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.295820] pci 0000:00:14.2: [8086:7aa7] type 00 class 0x050000
[    0.295839] pci 0000:00:14.2: reg 0x10: [mem 0x401421c000-0x401421ffff 64bit]
[    0.295851] pci 0000:00:14.2: reg 0x18: [mem 0x4014224000-0x4014224fff 64bit]
[    0.296055] pci 0000:00:15.0: [8086:7acc] type 00 class 0x0c8000
[    0.296078] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.296502] pci 0000:00:15.2: [8086:7ace] type 00 class 0x0c8000
[    0.296530] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.296873] pci 0000:00:16.0: [8086:7ae8] type 00 class 0x078000
[    0.296894] pci 0000:00:16.0: reg 0x10: [mem 0x4014221000-0x4014221fff 64bit]
[    0.296970] pci 0000:00:16.0: PME# supported from D3hot
[    0.297418] pci 0000:00:17.0: [8086:7ae2] type 00 class 0x010601
[    0.297429] pci 0000:00:17.0: reg 0x10: [mem 0x83f00000-0x83f01fff]
[    0.297434] pci 0000:00:17.0: reg 0x14: [mem 0x83f03000-0x83f030ff]
[    0.297440] pci 0000:00:17.0: reg 0x18: [io  0x6050-0x6057]
[    0.297445] pci 0000:00:17.0: reg 0x1c: [io  0x6040-0x6043]
[    0.297450] pci 0000:00:17.0: reg 0x20: [io  0x6020-0x603f]
[    0.297456] pci 0000:00:17.0: reg 0x24: [mem 0x83f02000-0x83f027ff]
[    0.297491] pci 0000:00:17.0: PME# supported from D3hot
[    0.297765] pci 0000:00:1a.0: [8086:7ac8] type 01 class 0x060400
[    0.297868] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.297907] pci 0000:00:1a.0: PTM enabled (root), 4ns granularity
[    0.298496] pci 0000:00:1b.0: [8086:7ac0] type 01 class 0x060400
[    0.298586] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.299138] pci 0000:00:1c.0: [8086:7ab8] type 01 class 0x060400
[    0.299218] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.299757] pci 0000:00:1c.2: [8086:7aba] type 01 class 0x060400
[    0.299851] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.299884] pci 0000:00:1c.2: PTM enabled (root), 4ns granularity
[    0.300466] pci 0000:00:1d.0: [8086:7ab4] type 01 class 0x060400
[    0.300568] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.300607] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.301186] pci 0000:00:1f.0: [8086:7a85] type 00 class 0x060100
[    0.301496] pci 0000:00:1f.3: [8086:7ad0] type 00 class 0x040300
[    0.301536] pci 0000:00:1f.3: reg 0x10: [mem 0x4014218000-0x401421bfff 64bit]
[    0.301588] pci 0000:00:1f.3: reg 0x20: [mem 0x4014000000-0x40140fffff 64bit]
[    0.301688] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.302157] pci 0000:00:1f.4: [8086:7aa3] type 00 class 0x0c0500
[    0.302179] pci 0000:00:1f.4: reg 0x10: [mem 0x4014220000-0x40142200ff 64bit]
[    0.302207] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.302426] pci 0000:00:1f.5: [8086:7aa4] type 00 class 0x0c8000
[    0.302444] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.302583] pci 0000:01:00.0: [10de:1fb1] type 00 class 0x030000
[    0.302594] pci 0000:01:00.0: reg 0x10: [mem 0x82000000-0x82ffffff]
[    0.302602] pci 0000:01:00.0: reg 0x14: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.302611] pci 0000:01:00.0: reg 0x1c: [mem 0x4010000000-0x4011ffffff 64bit pref]
[    0.302616] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
[    0.302622] pci 0000:01:00.0: reg 0x30: [mem 0x83000000-0x8307ffff pref]
[    0.302637] pci 0000:01:00.0: BAR 1: assigned to efifb
[    0.302671] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.302732] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)

Breizil29 · Message par **Breizil29** » dim. 17 déc. 2023, 20:16

Quand cela fonctionne
suite

Code : Tout sélectionner

[    0.302964] pci 0000:01:00.1: [10de:10fa] type 00 class 0x040300
[    0.302972] pci 0000:01:00.1: reg 0x10: [mem 0x83080000-0x83083fff]
[    0.303075] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.303077] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.303078] pci 0000:00:01.0:   bridge window [mem 0x82000000-0x830fffff]
[    0.303081] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.303113] pci 0000:02:00.0: [144d:a80a] type 00 class 0x010802
[    0.303126] pci 0000:02:00.0: reg 0x10: [mem 0x83e00000-0x83e03fff 64bit]
[    0.303318] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.303321] pci 0000:00:06.0:   bridge window [mem 0x83e00000-0x83efffff]
[    0.303388] pci 0000:03:00.0: [144d:a809] type 00 class 0x010802
[    0.303410] pci 0000:03:00.0: reg 0x10: [mem 0x83d00000-0x83d03fff 64bit]
[    0.303717] pci 0000:00:1a.0: PCI bridge to [bus 03]
[    0.303721] pci 0000:00:1a.0:   bridge window [mem 0x83d00000-0x83dfffff]
[    0.303773] pci 0000:00:1b.0: PCI bridge to [bus 04]
[    0.303822] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.303824] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.303827] pci 0000:00:1c.0:   bridge window [mem 0x83100000-0x83afffff]
[    0.303886] pci 0000:06:00.0: [10ec:8125] type 00 class 0x020000
[    0.303904] pci 0000:06:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.303927] pci 0000:06:00.0: reg 0x18: [mem 0x83c00000-0x83c0ffff 64bit]
[    0.303942] pci 0000:06:00.0: reg 0x20: [mem 0x83c10000-0x83c13fff 64bit]
[    0.304067] pci 0000:06:00.0: supports D1 D2
[    0.304068] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304310] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.304312] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.304315] pci 0000:00:1c.2:   bridge window [mem 0x83c00000-0x83cfffff]
[    0.304377] pci 0000:07:00.0: [144d:a808] type 00 class 0x010802
[    0.304400] pci 0000:07:00.0: reg 0x10: [mem 0x83b00000-0x83b03fff 64bit]
[    0.304709] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.304713] pci 0000:00:1d.0:   bridge window [mem 0x83b00000-0x83bfffff]
[    0.306191] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.306280] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.306367] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.306455] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.306541] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.306627] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.306714] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.306800] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.314189] iommu: Default domain type: Translated
[    0.314189] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.314189] SCSI subsystem initialized
[    0.314189] libata version 3.00 loaded.
[    0.314189] ACPI: bus type USB registered
[    0.314189] usbcore: registered new interface driver usbfs
[    0.314189] usbcore: registered new interface driver hub
[    0.314189] usbcore: registered new device driver usb
[    0.314189] pps_core: LinuxPPS API ver. 1 registered
[    0.314189] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.314189] PTP clock support registered
[    0.314189] EDAC MC: Ver: 3.0.0
[    0.314189] efivars: Registered efivars operations
[    0.314189] NetLabel: Initializing
[    0.314189] NetLabel:  domain hash size = 128
[    0.314189] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.314189] NetLabel:  unlabeled traffic allowed by default
[    0.314189] mctp: management component transport protocol core
[    0.314189] NET: Registered PF_MCTP protocol family
[    0.314189] PCI: Using ACPI for IRQ routing
[    0.334404] PCI: pci_cache_line_size set to 64 bytes
[    0.334493] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.334571] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.334573] e820: reserve RAM buffer [mem 0x5ff1f018-0x5fffffff]
[    0.334574] e820: reserve RAM buffer [mem 0x5ff2d018-0x5fffffff]
[    0.334574] e820: reserve RAM buffer [mem 0x67e4e000-0x67ffffff]
[    0.334575] e820: reserve RAM buffer [mem 0x67e9c000-0x67ffffff]
[    0.334576] e820: reserve RAM buffer [mem 0x6eec5000-0x6fffffff]
[    0.334576] e820: reserve RAM buffer [mem 0x71d68000-0x73ffffff]
[    0.334577] e820: reserve RAM buffer [mem 0x745cf000-0x77ffffff]
[    0.334577] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    0.334603] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.334603] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.334603] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.334603] vgaarb: loaded
[    0.334603] clocksource: Switched to clocksource tsc-early
[    0.334603] VFS: Disk quotas dquot_6.6.0
[    0.334603] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.334603] pnp: PnP ACPI init
[    0.334603] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.334603] pnp 00:01: [dma 0 disabled]
[    0.334603] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.334603] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.334603] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.335208] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.335210] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.335211] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.335212] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.335213] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.335215] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.335216] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.335217] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.335930] system 00:05: [io  0x2000-0x20fe] has been reserved
[    0.336631] pnp: PnP ACPI: found 7 devices
[    0.341931] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.341973] NET: Registered PF_INET protocol family
[    0.342152] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.344304] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.344339] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.344505] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.344786] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.344865] TCP: Hash tables configured (established 262144 bind 65536)
[    0.344997] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.345074] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.345144] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.345219] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.345223] NET: Registered PF_XDP protocol family
[    0.345230] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.345237] pci 0000:00:1c.0: BAR 15: assigned [mem 0x4014300000-0x40144fffff 64bit pref]
[    0.345240] pci 0000:00:15.0: BAR 0: assigned [mem 0x4014222000-0x4014222fff 64bit]
[    0.345296] pci 0000:00:15.2: BAR 0: assigned [mem 0x4014223000-0x4014223fff 64bit]
[    0.345311] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    0.345312] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    0.345314] pci 0000:00:1f.5: BAR 0: assigned [mem 0x83f04000-0x83f04fff]
[    0.345324] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.345326] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.345328] pci 0000:00:01.0:   bridge window [mem 0x82000000-0x830fffff]
[    0.345329] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.345332] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.345334] pci 0000:00:06.0:   bridge window [mem 0x83e00000-0x83efffff]
[    0.345338] pci 0000:00:1a.0: PCI bridge to [bus 03]
[    0.345344] pci 0000:00:1a.0:   bridge window [mem 0x83d00000-0x83dfffff]
[    0.345350] pci 0000:00:1b.0: PCI bridge to [bus 04]
[    0.345362] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.345364] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.345367] pci 0000:00:1c.0:   bridge window [mem 0x83100000-0x83afffff]
[    0.345369] pci 0000:00:1c.0:   bridge window [mem 0x4014300000-0x40144fffff 64bit pref]
[    0.345374] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.345375] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.345379] pci 0000:00:1c.2:   bridge window [mem 0x83c00000-0x83cfffff]
[    0.345385] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.345388] pci 0000:00:1d.0:   bridge window [mem 0x83b00000-0x83bfffff]
[    0.345394] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.345395] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.345396] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.345397] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
[    0.345398] pci_bus 0000:00: resource 8 [mem 0x80000000-0xbfffffff window]
[    0.345399] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    0.345400] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.345401] pci_bus 0000:01: resource 1 [mem 0x82000000-0x830fffff]
[    0.345402] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.345403] pci_bus 0000:02: resource 1 [mem 0x83e00000-0x83efffff]
[    0.345404] pci_bus 0000:03: resource 1 [mem 0x83d00000-0x83dfffff]
[    0.345404] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.345405] pci_bus 0000:05: resource 1 [mem 0x83100000-0x83afffff]
[    0.345406] pci_bus 0000:05: resource 2 [mem 0x4014300000-0x40144fffff 64bit pref]
[    0.345407] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.345408] pci_bus 0000:06: resource 1 [mem 0x83c00000-0x83cfffff]
[    0.345409] pci_bus 0000:07: resource 1 [mem 0x83b00000-0x83bfffff]
[    0.345828] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.345846] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.345866] PCI: CLS 64 bytes, default 64
[    0.345876] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.345876] software IO TLB: mapped [mem 0x000000006a409000-0x000000006e409000] (64MB)
[    0.345894] Trying to unpack rootfs image as initramfs...
[    0.345898] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3407c077a8d, max_idle_ns: 440795342283 ns
[    0.345937] clocksource: Switched to clocksource tsc
[    0.345950] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.353955] Initialise system trusted keyrings
[    0.353963] Key type blacklist registered
[    0.353996] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.354005] zbud: loaded
[    0.354142] integrity: Platform Keyring initialized
[    0.354144] integrity: Machine keyring initialized
[    0.360037] Key type asymmetric registered
[    0.360039] Asymmetric key parser 'x509' registered
[    0.360054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.360084] io scheduler mq-deadline registered
[    0.360085] io scheduler kyber registered
[    0.360092] io scheduler bfq registered
[    0.362084] pcieport 0000:00:01.0: PME: Signaling with IRQ 121
[    0.362127] pcieport 0000:00:01.0: AER: enabled with IRQ 121
[    0.362296] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
[    0.362331] pcieport 0000:00:06.0: AER: enabled with IRQ 122
[    0.362515] pcieport 0000:00:1a.0: PME: Signaling with IRQ 123
[    0.362561] pcieport 0000:00:1a.0: AER: enabled with IRQ 123
[    0.362703] pcieport 0000:00:1b.0: PME: Signaling with IRQ 124
[    0.362799] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
[    0.362813] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.363081] pcieport 0000:00:1c.2: PME: Signaling with IRQ 126
[    0.363128] pcieport 0000:00:1c.2: AER: enabled with IRQ 126
[    0.363335] pcieport 0000:00:1d.0: PME: Signaling with IRQ 127
[    0.363379] pcieport 0000:00:1d.0: AER: enabled with IRQ 127
[    0.363473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.363959] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.363974] ACPI: button: Sleep Button [SLPB]
[    0.363996] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.364006] ACPI: button: Power Button [PWRB]
[    0.364024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.366238] ACPI: button: Power Button [PWRF]
[    0.369970] thermal LNXTHERM:00: registered as thermal_zone0
[    0.369972] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.370172] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.370474] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.373097] hpet_acpi_add: no address or irqs in _CRS
[    0.373128] Non-volatile memory driver v1.3
[    0.373129] Linux agpgart interface v0.103
[    0.379815] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.380051] ACPI: bus type drm_connector registered
[    0.381357] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.382269] fbcon: Deferring console take-over
[    0.382271] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.383521] ahci 0000:00:17.0: version 3.0
[    0.383532] ahci 0000:00:17.0: enabling device (0000 -> 0003)
[    0.393837] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf0 impl SATA mode
[    0.393841] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds
[    0.412744] Freeing initrd memory: 16004K
[    0.423717] scsi host0: ahci
[    0.424050] scsi host1: ahci
[    0.424300] scsi host2: ahci
[    0.424491] scsi host3: ahci
[    0.424547] scsi host4: ahci
[    0.424592] scsi host5: ahci
[    0.424642] scsi host6: ahci
[    0.424688] scsi host7: ahci
[    0.424706] ata1: DUMMY
[    0.424707] ata2: DUMMY
[    0.424707] ata3: DUMMY
[    0.424708] ata4: DUMMY
[    0.424714] ata5: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02300 irq 128
[    0.424716] ata6: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02380 irq 128
[    0.424717] ata7: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02400 irq 128
[    0.424718] ata8: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02480 irq 128
[    0.424810] usbcore: registered new interface driver usbserial_generic
[    0.424813] usbserial: USB Serial support registered for generic
[    0.425078] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.426051] rtc_cmos rtc_cmos: registered as rtc0
[    0.426238] rtc_cmos rtc_cmos: setting system clock to 2023-12-17T08:36:35 UTC (1702802195)
[    0.426264] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.427147] intel_pstate: Intel P-state driver initializing
[    0.428807] intel_pstate: HWP enabled
[    0.428896] ledtrig-cpu: registered to indicate activity on CPUs
[    0.429051] hid: raw HID events driver (C) Jiri Kosina
[    0.429105] intel_pmc_core INT33A1:00:  initialized
[    0.429187] drop_monitor: Initializing network drop monitor service
[    0.437135] Initializing XFRM netlink socket
[    0.437156] NET: Registered PF_INET6 protocol family
[    0.444015] Segment Routing with IPv6
[    0.444017] RPL Segment Routing with IPv6
[    0.444024] In-situ OAM (IOAM) with IPv6
[    0.444051] NET: Registered PF_PACKET protocol family
[    0.446553] microcode: Microcode Update Driver: v2.2.
[    0.446560] IPI shorthand broadcast: enabled
[    0.448579] sched_clock: Marking stable (440350401, 6198792)->(470851017, -24301824)
[    0.448935] registered taskstats version 1
[    0.450455] Loading compiled-in X.509 certificates
[    0.453589] Loaded X.509 cert 'Build time autogenerated kernel key: 4e79f1538f2635281648851308d72dbbab99fba9'
[    0.457614] zswap: loaded using pool zstd/zsmalloc
[    0.458685] Key type .fscrypt registered
[    0.458686] Key type fscrypt-provisioning registered
[    0.458927] integrity: Loading X.509 certificate: UEFI:db
[    0.459054] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    0.459055] integrity: Loading X.509 certificate: UEFI:db
[    0.459137] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    0.459138] integrity: Loading X.509 certificate: UEFI:db
[    0.459147] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.459148] integrity: Loading X.509 certificate: UEFI:db
[    0.459157] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.459157] integrity: Loading X.509 certificate: UEFI:db
[    0.459240] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.460096] BERT: Error records from previous boot:
[    0.460097] [Hardware Error]: event severity: fatal
[    0.460098] [Hardware Error]:  Error 0, type: fatal
[    0.460099] [Hardware Error]:   section_type: Firmware Error Record Reference
[    0.460099] [Hardware Error]:   Firmware Error Record Type: SOC Firmware Error Record Type2
[    0.460100] [Hardware Error]:   Revision: 2
[    0.460100] [Hardware Error]:   Record Identifier: 8f87f311-c998-4d9e-a0c4-6065518c4f6d
[    0.460102] [Hardware Error]:   00000000: 17037101 0000000a 00000000 00000000  .q..............
[    0.460103] [Hardware Error]:   00000010: 00000000 00000000 00000000 deadbeef  ................
[    0.460104] [Hardware Error]:   00000020: deadbeef deadbeef                    ........
[    0.460104] BERT: Total records found: 1
[    0.460129] PM:   Magic number: 3:742:624
[    0.462234] RAS: Correctable Errors collector initialized.
[    0.462269] clk: Disabling unused clocks
[    0.733659] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.735132] ata5.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133
[    0.736983] ata5.00: configured for UDMA/133
[    0.737958] ata7: SATA link down (SStatus 4 SControl 300)
[    0.741263] ata8: SATA link down (SStatus 4 SControl 300)
[    0.741318] ata6: SATA link down (SStatus 4 SControl 300)
[    0.741977] scsi 4:0:0:0: CD-ROM            ASUS     DRW-24D5MT       2.00 PQ: 0 ANSI: 5
[    0.768463] Freeing unused decrypted memory: 2028K
[    0.768915] Freeing unused kernel image (initmem) memory: 3412K
[    0.776387] Write protecting the kernel read-only data: 30720k
[    0.777635] Freeing unused kernel image (rodata/data gap) memory: 1264K
[    0.791789] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.791792] rodata_test: all tests were successful
[    0.791797] Run /init as init process
[    0.791798]   with arguments:
[    0.791800]     /init
[    0.791800]   with environment:
[    0.791801]     HOME=/
[    0.791802]     TERM=linux
[    0.791802]     BOOT_IMAGE=/boot/vmlinuz-linux
[    0.821985] fbcon: Taking over console
[    0.825976] Console: switching to colour frame buffer device 240x67
[    0.900793] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[    0.900796] pci_bus 10000:e0: root bus resource [bus e0-ff]
[    0.900797] pci_bus 10000:e0: root bus resource [mem 0x80000000-0x81ffffff]
[    0.900797] pci_bus 10000:e0: root bus resource [mem 0x4014102000-0x40141fffff 64bit]
[    0.902217] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.902221] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.903310] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.903530] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.903532] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.903533] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[    0.903607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.903609] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.903610] usb usb1: Product: xHCI Host Controller
[    0.903611] usb usb1: Manufacturer: Linux 6.6.7-arch1-1 xhci-hcd
[    0.903613] usb usb1: SerialNumber: 0000:00:14.0
[    0.903726] hub 1-0:1.0: USB hub found
[    0.903752] hub 1-0:1.0: 16 ports detected
[    0.905512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    0.905516] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.905517] usb usb2: Product: xHCI Host Controller
[    0.905519] usb usb2: Manufacturer: Linux 6.6.7-arch1-1 xhci-hcd
[    0.905520] usb usb2: SerialNumber: 0000:00:14.0
[    0.905605] hub 2-0:1.0: USB hub found
[    0.905623] hub 2-0:1.0: 10 ports detected
[    0.905865] sr 4:0:0:0: [sr0] scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.905867] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.906500] usb: port power management may be unreliable
[    0.907916] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    0.907916] nvme 0000:03:00.0: platform quirk: setting simple suspend
[    0.907919] nvme 0000:07:00.0: platform quirk: setting simple suspend
[    0.907975] nvme nvme2: pci function 0000:07:00.0
[    0.907980] nvme nvme0: pci function 0000:03:00.0
[    0.907983] nvme nvme1: pci function 0000:02:00.0
[    0.913222] nvme nvme2: missing or invalid SUBNQN field.
[    0.913327] nvme nvme2: Shutdown timeout set to 8 seconds
[    0.916187] vmd 0000:00:0e.0: Bound to PCI domain 10000
[    0.919493] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    0.921485] nvme nvme0: Shutdown timeout set to 8 seconds
[    0.923314] nvme nvme1: Shutdown timeout set to 10 seconds
[    0.927749] nvme nvme1: 20/0/0 default/read/poll queues
[    0.930760]  nvme1n1: p1 p2 p3
[    0.932795] nvme nvme2: 20/0/0 default/read/poll queues
[    0.937454]  nvme2n1: p1 p2 p3 p4
[    0.951372] nvme nvme0: allocated 64 MiB host memory buffer.
[    1.000679] nvme nvme0: 12/0/0 default/read/poll queues
[    1.011956]  nvme0n1: p1
[    1.055452] device-mapper: uevent: version 1.0.3
[    1.055553] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    1.156307] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.267925] EXT4-fs (dm-0): mounted filesystem 3b792f53-5c82-4495-81bb-156b567e019e r/w with ordered data mode. Quota mode: none.
[    1.304438] usb 1-2: config 1 has an invalid interface number: 2 but max is 1
[    1.304450] usb 1-2: config 1 has no interface number 1
[    1.305462] usb 1-2: New USB device found, idVendor=0b05, idProduct=19af, bcdDevice= 1.00
[    1.305470] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.305473] usb 1-2: Product: AURA LED Controller
[    1.305477] usb 1-2: Manufacturer: AsusTek Computer Inc.
[    1.305480] usb 1-2: SerialNumber: 9876543210
[    1.328365] systemd[1]: systemd 255-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    1.328371] systemd[1]: Detected architecture x86-64.
[    1.328839] systemd[1]: Hostname set to <Archlinux>.
[    1.429885] usb 2-10: new SuperSpeed USB device number 2 using xhci_hcd
[    1.449515] usb 2-10: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.00
[    1.449527] usb 2-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.449531] usb 2-10: Product: AS2107
[    1.449552] usb 2-10: Manufacturer: ASMedia
[    1.449555] usb 2-10: SerialNumber: 123456789088
[    1.451222] hub 2-10:1.0: USB hub found
[    1.451353] hub 2-10:1.0: 4 ports detected
[    1.550981] systemd[1]: bpf-lsm: LSM BPF program attached
[    1.569647] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.647289] systemd[1]: Queued start job for default target Graphical Interface.
[    1.691802] systemd[1]: Created slice Slice /system/getty.
[    1.692514] systemd[1]: Created slice Slice /system/modprobe.
[    1.693068] systemd[1]: Created slice Slice /system/systemd-fsck.
[    1.693496] systemd[1]: Created slice User and Session Slice.
[    1.693649] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.693785] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.694133] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.694260] systemd[1]: Reached target Local Encrypted Volumes.
[    1.694333] systemd[1]: Reached target Login Prompts.
[    1.694395] systemd[1]: Reached target Local Integrity Protected Volumes.
[    1.694474] systemd[1]: Reached target Path Units.
[    1.694547] systemd[1]: Reached target Remote File Systems.
[    1.694607] systemd[1]: Reached target Slice Units.
[    1.694674] systemd[1]: Reached target Swaps.
[    1.694748] systemd[1]: Reached target Local Verity Protected Volumes.
[    1.694909] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.695419] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.698114] systemd[1]: Listening on Process Core Dump Socket.
[    1.698374] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.698587] systemd[1]: Listening on Journal Socket.
[    1.698685] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.698869] systemd[1]: Listening on udev Control Socket.
[    1.699021] systemd[1]: Listening on udev Kernel Socket.
[    1.700916] systemd[1]: Mounting Huge Pages File System...
[    1.702291] systemd[1]: Mounting POSIX Message Queue File System...
[    1.703601] systemd[1]: Mounting Kernel Debug File System...
[    1.704931] systemd[1]: Mounting Kernel Trace File System...
[    1.706128] systemd[1]: Mounting Temporary Directory /tmp...
[    1.707351] systemd[1]: Starting Create List of Static Device Nodes...
[    1.708857] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    1.709447] systemd[1]: Starting Load Kernel Module configfs...
[    1.709877] systemd[1]: Starting Load Kernel Module dm_mod...
[    1.710243] systemd[1]: Starting Load Kernel Module drm...
[    1.710650] systemd[1]: Starting Load Kernel Module fuse...
[    1.710971] systemd[1]: Starting Load Kernel Module loop...
[    1.711000] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    1.711774] systemd[1]: Starting Journal Service...
[    1.712331] systemd[1]: Starting Load Kernel Modules...
[    1.712353] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.712621] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.712657] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.712951] systemd[1]: Starting Coldplug All udev Devices...
[    1.713428] systemd[1]: Mounted Huge Pages File System.
[    1.713481] systemd[1]: Mounted POSIX Message Queue File System.
[    1.713516] systemd[1]: Mounted Kernel Debug File System.
[    1.713554] systemd[1]: Mounted Kernel Trace File System.
[    1.713591] systemd[1]: Mounted Temporary Directory /tmp.
[    1.715874] loop: module loaded
[    1.716005] usb 1-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[    1.716008] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.716009] usb 1-4: Product: USB Receiver
[    1.716011] usb 1-4: Manufacturer: Logitech
[    1.717881] fuse: init (API version 7.39)
[    1.720197] systemd-journald[387]: Collecting audit messages is disabled.
[    1.763117] systemd[1]: Finished Create List of Static Device Nodes.
[    1.763348] systemd[1]: Started Journal Service.
[    1.766384] EXT4-fs (dm-0): re-mounted 3b792f53-5c82-4495-81bb-156b567e019e r/w. Quota mode: none.
[    1.833554] nvidia: loading out-of-tree module taints kernel.
[    1.833562] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.842959] usb 1-10: new high-speed USB device number 4 using xhci_hcd
[    1.869937] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[    1.870517] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[    1.916034] NVRM: loading NVIDIA UNIX Open Kernel Module for x86_64  545.29.06  Release Build  (archlinux-builder@)
[    1.984910] usb 1-10: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.00
[    1.984913] usb 1-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.984913] usb 1-10: Product: AS2107
[    1.984914] usb 1-10: Manufacturer: ASMedia
[    1.984915] usb 1-10: SerialNumber: 123456789088
[    1.985778] hub 1-10:1.0: USB hub found
[    1.985929] hub 1-10:1.0: 4 ports detected
[    2.027163] nvidia-uvm: Loaded the UVM driver, major device number 234.
[    2.044496] vboxdrv: Found 20 processor cores/threads
[    2.066490] vboxdrv: TSC mode is Invariant, tentative frequency 3609598882 Hz
[    2.066492] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
[    2.069462] VBoxNetAdp: Successfully started.
[    2.074716] VBoxNetFlt: Successfully started.
[    2.076085] systemd-journald[387]: Received client request to flush runtime journal.
[    2.094072] systemd-journald[387]: /var/log/journal/a3482dfc931d40dda0e6ebaad4b5b0f1/system.journal: Journal file uses a different sequence number ID, rotating.
[    2.094081] systemd-journald[387]: Rotating system journal.
[    2.109578] usb 1-12: new full-speed USB device number 5 using xhci_hcd
[    2.251939] usb 1-12: New USB device found, idVendor=3434, idProduct=0109, bcdDevice= 2.04
[    2.251951] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.251956] usb 1-12: Product: Keychron Q1
[    2.251960] usb 1-12: Manufacturer: Keychron
[    2.376263] usb 1-13: new high-speed USB device number 6 using xhci_hcd
[    2.516694] usb 1-13: New USB device found, idVendor=31e9, idProduct=0002, bcdDevice= 1.10
[    2.516701] usb 1-13: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.516703] usb 1-13: Product: SSL 2+
[    2.516705] usb 1-13: Manufacturer: Solid State Logic
[    2.535781] hid-generic 0003:0B05:19AF.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:00:14.0-2/input2
[    2.536515] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    2.539836] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C52B.0002/input/input4
[    2.541251] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.541309] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.542689] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    2.543329] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.543427] i2c i2c-0: Successfully instantiated SPD at 0x51
[    2.544122] i2c i2c-0: Successfully instantiated SPD at 0x53
[    2.545410] spi-nor spi0.0: s25fl064k (8192 Kbytes)
[    2.547045] Creating 1 MTD partitions on "0000:00:1f.5":
[    2.547047] 0x000000000000-0x000001800000 : "BIOS"
[    2.547049] mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x800000
[    2.547810] spi-nor spi0.1: mx25l12805d (16384 Kbytes)
[    2.549553] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    2.550048] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.566262] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
[    2.566539] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    2.596682] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    2.600059] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input5
[    2.600295] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input6
[    2.659647] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input7
[    2.659696] hid-generic 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    2.662173] hid-generic 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[    2.662534] input: Keychron Keychron Q1 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:3434:0109.0005/input/input9
[    2.663808] iTCO_vendor_support: vendor-support=0
[    2.664312] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.664327] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.674180] i8042: PNP: No PS/2 controller found.
[    2.675867] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[    2.675873] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.675876] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.678207] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for x86_64  545.29.06  Release Build  (archlinux-builder@)
[    2.678558] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    2.678610] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.681678] cryptd: max_cpu_qlen set to 1000
[    2.682975] r8169 0000:06:00.0: enabling device (0000 -> 0003)
[    2.683216] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.684817] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    2.684821] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    2.690083] asus_wmi: ASUS WMI generic driver loaded
[    2.691089] AVX2 version of gcm_enc/dec engaged.
[    2.691121] AES CTR mode by8 optimization enabled
[    2.692734] asus_wmi: Initialization: 0x0
[    2.692782] asus_wmi: BIOS WMI version: 0.0
[    2.692828] asus_wmi: SFUN value: 0x0
[    2.692829] eeepc-wmi eeepc-wmi: Detected AsusMbSwInterface, not ASUSWMI, use DSTS
[    2.694094] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[    2.698076] r8169 0000:06:00.0 eth0: RTL8125B, 04:42:1a:97:b5:cd, XID 641, IRQ 205
[    2.698078] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.699860] r8169 0000:06:00.0 enp6s0: renamed from eth0
[    2.702119] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.702416] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    2.702452] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.702454] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.719667] hid-generic 0003:3434:0109.0005: input,hidraw4: USB HID v1.11 Keyboard [Keychron Keychron Q1] on usb-0000:00:14.0-12/input0
[    2.719978] hid-generic 0003:3434:0109.0006: hiddev99,hidraw5: USB HID v1.11 Device [Keychron Keychron Q1] on usb-0000:00:14.0-12/input1
[    2.720525] input: Keychron Keychron Q1 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input11
[    2.720567] input: Keychron Keychron Q1 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input12
[    2.722366] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.722369] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.722370] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.722371] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.722371] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    2.722372] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.722372] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.722373] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.722374] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.742192] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    2.742267] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    2.765506] intel_tcc_cooling: Programmable TCC Offset detected
[    2.775200] intel_rapl_msr: PL4 support detected.
[    2.775215] intel_rapl_common: Found RAPL domain package
[    2.775217] intel_rapl_common: Found RAPL domain core
[    2.776313] input: Keychron Keychron Q1 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input13
[    2.776365] input: Keychron Keychron Q1 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input14
[    2.776382] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    2.776402] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    2.776422] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    2.776568] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    2.776589] hid-generic 0003:3434:0109.0007: input,hidraw6: USB HID v1.11 Mouse [Keychron Keychron Q1] on usb-0000:00:14.0-12/input2
[    2.776602] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    2.776627] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    2.776638] usbcore: registered new interface driver usbhid
[    2.776640] usbhid: USB HID core driver
[    2.776870] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[    2.858177] EXT4-fs (dm-1): mounted filesystem 7c1dd610-f0d1-43b4-a0b4-3ba1d81f0db6 r/w with ordered data mode. Quota mode: none.
[    2.862014] mousedev: PS/2 mouse device common for all mice
[    3.008433] mc: Linux media interface: v0.10
[    3.214187] usb 1-13: Quirk or no altest; falling back to MIDI 1.0
[    3.214764] usbcore: registered new interface driver snd-usb-audio
[    3.439720] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
[    3.461667] logitech-djreceiver 0003:046D:C52B.0004: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[    3.577509] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input24
[    3.579964] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input25
[    3.580580] hid-generic 0003:046D:406F.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:14.0-4/input2:2
[    3.613185] r8169 0000:06:00.0 enp6s0: Link is Down
[    3.977302] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input29
[    3.978346] logitech-hidpp-device 0003:046D:406F.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-4/input2:2
[    4.335666] ACPI Warning: \_SB.PC00.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230628/nsarguments-61)
[    6.586690] Xorg[822]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[    7.390057] simple-framebuffer simple-framebuffer.0: swiotlb buffer is full (sz: 1822720 bytes), total 32768 (slots), used 76 (slots)
[    7.852030] rfkill: input handler disabled
[   13.033181] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: Downshift occurred from negotiated speed 1Gbps to actual speed 100Mbps, check cabling!
[   13.033210] r8169 0000:06:00.0 enp6s0: Link is Up - 100Mbps/Full (downshifted) - flow control rx/tx
[   13.816753] systemd-journald[387]: /var/log/journal/a3482dfc931d40dda0e6ebaad4b5b0f1/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   14.432349] rfkill: input handler enabled
[   15.699976] simple-framebuffer simple-framebuffer.0: swiotlb buffer is full (sz: 1351680 bytes), total 32768 (slots), used 84 (slots)
[   16.161368] rfkill: input handler disabled
[   17.205543] ISO 9660 Extensions: Microsoft Joliet Level 3
[   17.247267] ISOFS: changing to secondary root
[   35.856797] logitech-hidpp-device 0003:046D:406F.0008: HID++ 4.5 device connected.

Breizil29 · Message par **Breizil29** » dim. 17 déc. 2023, 20:19

Quand j'envoie le résultat de dmesg en 1 fois ;
Votre message contient 79860 caractères.
Le nombre maximal de caractères autorisés est de 60000.

Message par **benjarobin** » dim. 17 déc. 2023, 20:22

Breizil29 a écrit : ↑dim. 17 déc. 2023, 20:19 Quand j'envoie le résultat de dmesg en 1 fois ;
Votre message contient 79860 caractères.
Le nombre maximal de caractères autorisés est de 60000.

C'est pour cela qu'il faut utiliser un site de type pastebin pour cela. Bref, j'ai tout ce qu'il m'intéresse

Tu as un problème avec ton câble Ethernet (10s pour passer UP est aussi totalement anormal) :

Code : Tout sélectionner

RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: Downshift occurred from negotiated speed 1Gbps to actual speed 100Mbps, check cabling!

A quoi est relié ton PC et par quel type de câble ?

Breizil29 · Message par **Breizil29** » lun. 18 déc. 2023, 18:50

benjarobin a écrit : ↑dim. 17 déc. 2023, 20:22 A quoi est relié ton PC et par quel type de câble ?

A un boitier cpl et le cable : DATA CABLE CAT.5 UTP 26AWG PVC 75°C EIA/TIA 56BB

Message par **benjarobin** » lun. 18 déc. 2023, 19:52

Peux tu donner la référence du boîtier CPL ? Le fautif est très certainement le câble entre ton PC et le boîtier CPL.
Tu devrais utiliser un câble de catégorie 6 de préférence, tu as un câble de catégorie 5 sans aucun blindage ce qui n'est pas idéal (quelle longueur ?)
En effet la plupart des boîtiers CPL négocie en gigabit, et tu as une carte réseau gigabit, tu as donc l'obligation de relier les 2 par un câble qui supporte le gigabit, sinon tu te retrouves dans des états foireux

Arch Linux

Archlinux.fr [Forums]

[Perte de connexion] archlinux

[Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux

Re: [Perte de connexion] archlinux