Code : Tout sélectionner
[ 0.302964] pci 0000:01:00.1: [10de:10fa] type 00 class 0x040300
[ 0.302972] pci 0000:01:00.1: reg 0x10: [mem 0x83080000-0x83083fff]
[ 0.303075] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.303077] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.303078] pci 0000:00:01.0: bridge window [mem 0x82000000-0x830fffff]
[ 0.303081] pci 0000:00:01.0: bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[ 0.303113] pci 0000:02:00.0: [144d:a80a] type 00 class 0x010802
[ 0.303126] pci 0000:02:00.0: reg 0x10: [mem 0x83e00000-0x83e03fff 64bit]
[ 0.303318] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.303321] pci 0000:00:06.0: bridge window [mem 0x83e00000-0x83efffff]
[ 0.303388] pci 0000:03:00.0: [144d:a809] type 00 class 0x010802
[ 0.303410] pci 0000:03:00.0: reg 0x10: [mem 0x83d00000-0x83d03fff 64bit]
[ 0.303717] pci 0000:00:1a.0: PCI bridge to [bus 03]
[ 0.303721] pci 0000:00:1a.0: bridge window [mem 0x83d00000-0x83dfffff]
[ 0.303773] pci 0000:00:1b.0: PCI bridge to [bus 04]
[ 0.303822] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.303824] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.303827] pci 0000:00:1c.0: bridge window [mem 0x83100000-0x83afffff]
[ 0.303886] pci 0000:06:00.0: [10ec:8125] type 00 class 0x020000
[ 0.303904] pci 0000:06:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.303927] pci 0000:06:00.0: reg 0x18: [mem 0x83c00000-0x83c0ffff 64bit]
[ 0.303942] pci 0000:06:00.0: reg 0x20: [mem 0x83c10000-0x83c13fff 64bit]
[ 0.304067] pci 0000:06:00.0: supports D1 D2
[ 0.304068] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.304310] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.304312] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.304315] pci 0000:00:1c.2: bridge window [mem 0x83c00000-0x83cfffff]
[ 0.304377] pci 0000:07:00.0: [144d:a808] type 00 class 0x010802
[ 0.304400] pci 0000:07:00.0: reg 0x10: [mem 0x83b00000-0x83b03fff 64bit]
[ 0.304709] pci 0000:00:1d.0: PCI bridge to [bus 07]
[ 0.304713] pci 0000:00:1d.0: bridge window [mem 0x83b00000-0x83bfffff]
[ 0.306191] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.306280] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[ 0.306367] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.306455] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.306541] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.306627] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.306714] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.306800] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.314189] iommu: Default domain type: Translated
[ 0.314189] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.314189] SCSI subsystem initialized
[ 0.314189] libata version 3.00 loaded.
[ 0.314189] ACPI: bus type USB registered
[ 0.314189] usbcore: registered new interface driver usbfs
[ 0.314189] usbcore: registered new interface driver hub
[ 0.314189] usbcore: registered new device driver usb
[ 0.314189] pps_core: LinuxPPS API ver. 1 registered
[ 0.314189] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.314189] PTP clock support registered
[ 0.314189] EDAC MC: Ver: 3.0.0
[ 0.314189] efivars: Registered efivars operations
[ 0.314189] NetLabel: Initializing
[ 0.314189] NetLabel: domain hash size = 128
[ 0.314189] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.314189] NetLabel: unlabeled traffic allowed by default
[ 0.314189] mctp: management component transport protocol core
[ 0.314189] NET: Registered PF_MCTP protocol family
[ 0.314189] PCI: Using ACPI for IRQ routing
[ 0.334404] PCI: pci_cache_line_size set to 64 bytes
[ 0.334493] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.334571] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.334573] e820: reserve RAM buffer [mem 0x5ff1f018-0x5fffffff]
[ 0.334574] e820: reserve RAM buffer [mem 0x5ff2d018-0x5fffffff]
[ 0.334574] e820: reserve RAM buffer [mem 0x67e4e000-0x67ffffff]
[ 0.334575] e820: reserve RAM buffer [mem 0x67e9c000-0x67ffffff]
[ 0.334576] e820: reserve RAM buffer [mem 0x6eec5000-0x6fffffff]
[ 0.334576] e820: reserve RAM buffer [mem 0x71d68000-0x73ffffff]
[ 0.334577] e820: reserve RAM buffer [mem 0x745cf000-0x77ffffff]
[ 0.334577] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.334603] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.334603] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.334603] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.334603] vgaarb: loaded
[ 0.334603] clocksource: Switched to clocksource tsc-early
[ 0.334603] VFS: Disk quotas dquot_6.6.0
[ 0.334603] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.334603] pnp: PnP ACPI init
[ 0.334603] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.334603] pnp 00:01: [dma 0 disabled]
[ 0.334603] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.334603] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.334603] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.335208] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ 0.335210] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.335211] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.335212] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
[ 0.335213] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.335215] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.335216] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.335217] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.335930] system 00:05: [io 0x2000-0x20fe] has been reserved
[ 0.336631] pnp: PnP ACPI: found 7 devices
[ 0.341931] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.341973] NET: Registered PF_INET protocol family
[ 0.342152] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.344304] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.344339] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.344505] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.344786] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.344865] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.344997] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.345074] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.345144] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.345219] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.345223] NET: Registered PF_XDP protocol family
[ 0.345230] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.345237] pci 0000:00:1c.0: BAR 15: assigned [mem 0x4014300000-0x40144fffff 64bit pref]
[ 0.345240] pci 0000:00:15.0: BAR 0: assigned [mem 0x4014222000-0x4014222fff 64bit]
[ 0.345296] pci 0000:00:15.2: BAR 0: assigned [mem 0x4014223000-0x4014223fff 64bit]
[ 0.345311] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[ 0.345312] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[ 0.345314] pci 0000:00:1f.5: BAR 0: assigned [mem 0x83f04000-0x83f04fff]
[ 0.345324] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.345326] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.345328] pci 0000:00:01.0: bridge window [mem 0x82000000-0x830fffff]
[ 0.345329] pci 0000:00:01.0: bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[ 0.345332] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.345334] pci 0000:00:06.0: bridge window [mem 0x83e00000-0x83efffff]
[ 0.345338] pci 0000:00:1a.0: PCI bridge to [bus 03]
[ 0.345344] pci 0000:00:1a.0: bridge window [mem 0x83d00000-0x83dfffff]
[ 0.345350] pci 0000:00:1b.0: PCI bridge to [bus 04]
[ 0.345362] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.345364] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.345367] pci 0000:00:1c.0: bridge window [mem 0x83100000-0x83afffff]
[ 0.345369] pci 0000:00:1c.0: bridge window [mem 0x4014300000-0x40144fffff 64bit pref]
[ 0.345374] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.345375] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.345379] pci 0000:00:1c.2: bridge window [mem 0x83c00000-0x83cfffff]
[ 0.345385] pci 0000:00:1d.0: PCI bridge to [bus 07]
[ 0.345388] pci 0000:00:1d.0: bridge window [mem 0x83b00000-0x83bfffff]
[ 0.345394] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.345395] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.345396] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.345397] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
[ 0.345398] pci_bus 0000:00: resource 8 [mem 0x80000000-0xbfffffff window]
[ 0.345399] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[ 0.345400] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.345401] pci_bus 0000:01: resource 1 [mem 0x82000000-0x830fffff]
[ 0.345402] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4011ffffff 64bit pref]
[ 0.345403] pci_bus 0000:02: resource 1 [mem 0x83e00000-0x83efffff]
[ 0.345404] pci_bus 0000:03: resource 1 [mem 0x83d00000-0x83dfffff]
[ 0.345404] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.345405] pci_bus 0000:05: resource 1 [mem 0x83100000-0x83afffff]
[ 0.345406] pci_bus 0000:05: resource 2 [mem 0x4014300000-0x40144fffff 64bit pref]
[ 0.345407] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.345408] pci_bus 0000:06: resource 1 [mem 0x83c00000-0x83cfffff]
[ 0.345409] pci_bus 0000:07: resource 1 [mem 0x83b00000-0x83bfffff]
[ 0.345828] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.345846] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.345866] PCI: CLS 64 bytes, default 64
[ 0.345876] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.345876] software IO TLB: mapped [mem 0x000000006a409000-0x000000006e409000] (64MB)
[ 0.345894] Trying to unpack rootfs image as initramfs...
[ 0.345898] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3407c077a8d, max_idle_ns: 440795342283 ns
[ 0.345937] clocksource: Switched to clocksource tsc
[ 0.345950] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.353955] Initialise system trusted keyrings
[ 0.353963] Key type blacklist registered
[ 0.353996] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.354005] zbud: loaded
[ 0.354142] integrity: Platform Keyring initialized
[ 0.354144] integrity: Machine keyring initialized
[ 0.360037] Key type asymmetric registered
[ 0.360039] Asymmetric key parser 'x509' registered
[ 0.360054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.360084] io scheduler mq-deadline registered
[ 0.360085] io scheduler kyber registered
[ 0.360092] io scheduler bfq registered
[ 0.362084] pcieport 0000:00:01.0: PME: Signaling with IRQ 121
[ 0.362127] pcieport 0000:00:01.0: AER: enabled with IRQ 121
[ 0.362296] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
[ 0.362331] pcieport 0000:00:06.0: AER: enabled with IRQ 122
[ 0.362515] pcieport 0000:00:1a.0: PME: Signaling with IRQ 123
[ 0.362561] pcieport 0000:00:1a.0: AER: enabled with IRQ 123
[ 0.362703] pcieport 0000:00:1b.0: PME: Signaling with IRQ 124
[ 0.362799] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
[ 0.362813] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.363081] pcieport 0000:00:1c.2: PME: Signaling with IRQ 126
[ 0.363128] pcieport 0000:00:1c.2: AER: enabled with IRQ 126
[ 0.363335] pcieport 0000:00:1d.0: PME: Signaling with IRQ 127
[ 0.363379] pcieport 0000:00:1d.0: AER: enabled with IRQ 127
[ 0.363473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.363959] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.363974] ACPI: button: Sleep Button [SLPB]
[ 0.363996] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.364006] ACPI: button: Power Button [PWRB]
[ 0.364024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.366238] ACPI: button: Power Button [PWRF]
[ 0.369970] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.369972] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.370172] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.370474] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.373097] hpet_acpi_add: no address or irqs in _CRS
[ 0.373128] Non-volatile memory driver v1.3
[ 0.373129] Linux agpgart interface v0.103
[ 0.379815] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.380051] ACPI: bus type drm_connector registered
[ 0.381357] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.382269] fbcon: Deferring console take-over
[ 0.382271] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.383521] ahci 0000:00:17.0: version 3.0
[ 0.383532] ahci 0000:00:17.0: enabling device (0000 -> 0003)
[ 0.393837] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf0 impl SATA mode
[ 0.393841] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds
[ 0.412744] Freeing initrd memory: 16004K
[ 0.423717] scsi host0: ahci
[ 0.424050] scsi host1: ahci
[ 0.424300] scsi host2: ahci
[ 0.424491] scsi host3: ahci
[ 0.424547] scsi host4: ahci
[ 0.424592] scsi host5: ahci
[ 0.424642] scsi host6: ahci
[ 0.424688] scsi host7: ahci
[ 0.424706] ata1: DUMMY
[ 0.424707] ata2: DUMMY
[ 0.424707] ata3: DUMMY
[ 0.424708] ata4: DUMMY
[ 0.424714] ata5: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02300 irq 128
[ 0.424716] ata6: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02380 irq 128
[ 0.424717] ata7: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02400 irq 128
[ 0.424718] ata8: SATA max UDMA/133 abar m2048@0x83f02000 port 0x83f02480 irq 128
[ 0.424810] usbcore: registered new interface driver usbserial_generic
[ 0.424813] usbserial: USB Serial support registered for generic
[ 0.425078] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.426051] rtc_cmos rtc_cmos: registered as rtc0
[ 0.426238] rtc_cmos rtc_cmos: setting system clock to 2023-12-17T08:36:35 UTC (1702802195)
[ 0.426264] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[ 0.427147] intel_pstate: Intel P-state driver initializing
[ 0.428807] intel_pstate: HWP enabled
[ 0.428896] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.429051] hid: raw HID events driver (C) Jiri Kosina
[ 0.429105] intel_pmc_core INT33A1:00: initialized
[ 0.429187] drop_monitor: Initializing network drop monitor service
[ 0.437135] Initializing XFRM netlink socket
[ 0.437156] NET: Registered PF_INET6 protocol family
[ 0.444015] Segment Routing with IPv6
[ 0.444017] RPL Segment Routing with IPv6
[ 0.444024] In-situ OAM (IOAM) with IPv6
[ 0.444051] NET: Registered PF_PACKET protocol family
[ 0.446553] microcode: Microcode Update Driver: v2.2.
[ 0.446560] IPI shorthand broadcast: enabled
[ 0.448579] sched_clock: Marking stable (440350401, 6198792)->(470851017, -24301824)
[ 0.448935] registered taskstats version 1
[ 0.450455] Loading compiled-in X.509 certificates
[ 0.453589] Loaded X.509 cert 'Build time autogenerated kernel key: 4e79f1538f2635281648851308d72dbbab99fba9'
[ 0.457614] zswap: loaded using pool zstd/zsmalloc
[ 0.458685] Key type .fscrypt registered
[ 0.458686] Key type fscrypt-provisioning registered
[ 0.458927] integrity: Loading X.509 certificate: UEFI:db
[ 0.459054] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 0.459055] integrity: Loading X.509 certificate: UEFI:db
[ 0.459137] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 0.459138] integrity: Loading X.509 certificate: UEFI:db
[ 0.459147] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.459148] integrity: Loading X.509 certificate: UEFI:db
[ 0.459157] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.459157] integrity: Loading X.509 certificate: UEFI:db
[ 0.459240] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.460096] BERT: Error records from previous boot:
[ 0.460097] [Hardware Error]: event severity: fatal
[ 0.460098] [Hardware Error]: Error 0, type: fatal
[ 0.460099] [Hardware Error]: section_type: Firmware Error Record Reference
[ 0.460099] [Hardware Error]: Firmware Error Record Type: SOC Firmware Error Record Type2
[ 0.460100] [Hardware Error]: Revision: 2
[ 0.460100] [Hardware Error]: Record Identifier: 8f87f311-c998-4d9e-a0c4-6065518c4f6d
[ 0.460102] [Hardware Error]: 00000000: 17037101 0000000a 00000000 00000000 .q..............
[ 0.460103] [Hardware Error]: 00000010: 00000000 00000000 00000000 deadbeef ................
[ 0.460104] [Hardware Error]: 00000020: deadbeef deadbeef ........
[ 0.460104] BERT: Total records found: 1
[ 0.460129] PM: Magic number: 3:742:624
[ 0.462234] RAS: Correctable Errors collector initialized.
[ 0.462269] clk: Disabling unused clocks
[ 0.733659] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.735132] ata5.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133
[ 0.736983] ata5.00: configured for UDMA/133
[ 0.737958] ata7: SATA link down (SStatus 4 SControl 300)
[ 0.741263] ata8: SATA link down (SStatus 4 SControl 300)
[ 0.741318] ata6: SATA link down (SStatus 4 SControl 300)
[ 0.741977] scsi 4:0:0:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5
[ 0.768463] Freeing unused decrypted memory: 2028K
[ 0.768915] Freeing unused kernel image (initmem) memory: 3412K
[ 0.776387] Write protecting the kernel read-only data: 30720k
[ 0.777635] Freeing unused kernel image (rodata/data gap) memory: 1264K
[ 0.791789] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.791792] rodata_test: all tests were successful
[ 0.791797] Run /init as init process
[ 0.791798] with arguments:
[ 0.791800] /init
[ 0.791800] with environment:
[ 0.791801] HOME=/
[ 0.791802] TERM=linux
[ 0.791802] BOOT_IMAGE=/boot/vmlinuz-linux
[ 0.821985] fbcon: Taking over console
[ 0.825976] Console: switching to colour frame buffer device 240x67
[ 0.900793] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[ 0.900796] pci_bus 10000:e0: root bus resource [bus e0-ff]
[ 0.900797] pci_bus 10000:e0: root bus resource [mem 0x80000000-0x81ffffff]
[ 0.900797] pci_bus 10000:e0: root bus resource [mem 0x4014102000-0x40141fffff 64bit]
[ 0.902217] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.902221] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.903310] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 0.903530] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.903532] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.903533] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[ 0.903607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 0.903609] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.903610] usb usb1: Product: xHCI Host Controller
[ 0.903611] usb usb1: Manufacturer: Linux 6.6.7-arch1-1 xhci-hcd
[ 0.903613] usb usb1: SerialNumber: 0000:00:14.0
[ 0.903726] hub 1-0:1.0: USB hub found
[ 0.903752] hub 1-0:1.0: 16 ports detected
[ 0.905512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 0.905516] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905517] usb usb2: Product: xHCI Host Controller
[ 0.905519] usb usb2: Manufacturer: Linux 6.6.7-arch1-1 xhci-hcd
[ 0.905520] usb usb2: SerialNumber: 0000:00:14.0
[ 0.905605] hub 2-0:1.0: USB hub found
[ 0.905623] hub 2-0:1.0: 10 ports detected
[ 0.905865] sr 4:0:0:0: [sr0] scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.905867] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.906500] usb: port power management may be unreliable
[ 0.907916] nvme 0000:02:00.0: platform quirk: setting simple suspend
[ 0.907916] nvme 0000:03:00.0: platform quirk: setting simple suspend
[ 0.907919] nvme 0000:07:00.0: platform quirk: setting simple suspend
[ 0.907975] nvme nvme2: pci function 0000:07:00.0
[ 0.907980] nvme nvme0: pci function 0000:03:00.0
[ 0.907983] nvme nvme1: pci function 0000:02:00.0
[ 0.913222] nvme nvme2: missing or invalid SUBNQN field.
[ 0.913327] nvme nvme2: Shutdown timeout set to 8 seconds
[ 0.916187] vmd 0000:00:0e.0: Bound to PCI domain 10000
[ 0.919493] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 0.921485] nvme nvme0: Shutdown timeout set to 8 seconds
[ 0.923314] nvme nvme1: Shutdown timeout set to 10 seconds
[ 0.927749] nvme nvme1: 20/0/0 default/read/poll queues
[ 0.930760] nvme1n1: p1 p2 p3
[ 0.932795] nvme nvme2: 20/0/0 default/read/poll queues
[ 0.937454] nvme2n1: p1 p2 p3 p4
[ 0.951372] nvme nvme0: allocated 64 MiB host memory buffer.
[ 1.000679] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.011956] nvme0n1: p1
[ 1.055452] device-mapper: uevent: version 1.0.3
[ 1.055553] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 1.156307] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 1.267925] EXT4-fs (dm-0): mounted filesystem 3b792f53-5c82-4495-81bb-156b567e019e r/w with ordered data mode. Quota mode: none.
[ 1.304438] usb 1-2: config 1 has an invalid interface number: 2 but max is 1
[ 1.304450] usb 1-2: config 1 has no interface number 1
[ 1.305462] usb 1-2: New USB device found, idVendor=0b05, idProduct=19af, bcdDevice= 1.00
[ 1.305470] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.305473] usb 1-2: Product: AURA LED Controller
[ 1.305477] usb 1-2: Manufacturer: AsusTek Computer Inc.
[ 1.305480] usb 1-2: SerialNumber: 9876543210
[ 1.328365] systemd[1]: systemd 255-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1.328371] systemd[1]: Detected architecture x86-64.
[ 1.328839] systemd[1]: Hostname set to <Archlinux>.
[ 1.429885] usb 2-10: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.449515] usb 2-10: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.00
[ 1.449527] usb 2-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.449531] usb 2-10: Product: AS2107
[ 1.449552] usb 2-10: Manufacturer: ASMedia
[ 1.449555] usb 2-10: SerialNumber: 123456789088
[ 1.451222] hub 2-10:1.0: USB hub found
[ 1.451353] hub 2-10:1.0: 4 ports detected
[ 1.550981] systemd[1]: bpf-lsm: LSM BPF program attached
[ 1.569647] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 1.647289] systemd[1]: Queued start job for default target Graphical Interface.
[ 1.691802] systemd[1]: Created slice Slice /system/getty.
[ 1.692514] systemd[1]: Created slice Slice /system/modprobe.
[ 1.693068] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 1.693496] systemd[1]: Created slice User and Session Slice.
[ 1.693649] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.693785] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.694133] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.694260] systemd[1]: Reached target Local Encrypted Volumes.
[ 1.694333] systemd[1]: Reached target Login Prompts.
[ 1.694395] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 1.694474] systemd[1]: Reached target Path Units.
[ 1.694547] systemd[1]: Reached target Remote File Systems.
[ 1.694607] systemd[1]: Reached target Slice Units.
[ 1.694674] systemd[1]: Reached target Swaps.
[ 1.694748] systemd[1]: Reached target Local Verity Protected Volumes.
[ 1.694909] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.695419] systemd[1]: Listening on LVM2 poll daemon socket.
[ 1.698114] systemd[1]: Listening on Process Core Dump Socket.
[ 1.698374] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.698587] systemd[1]: Listening on Journal Socket.
[ 1.698685] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 1.698869] systemd[1]: Listening on udev Control Socket.
[ 1.699021] systemd[1]: Listening on udev Kernel Socket.
[ 1.700916] systemd[1]: Mounting Huge Pages File System...
[ 1.702291] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.703601] systemd[1]: Mounting Kernel Debug File System...
[ 1.704931] systemd[1]: Mounting Kernel Trace File System...
[ 1.706128] systemd[1]: Mounting Temporary Directory /tmp...
[ 1.707351] systemd[1]: Starting Create List of Static Device Nodes...
[ 1.708857] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 1.709447] systemd[1]: Starting Load Kernel Module configfs...
[ 1.709877] systemd[1]: Starting Load Kernel Module dm_mod...
[ 1.710243] systemd[1]: Starting Load Kernel Module drm...
[ 1.710650] systemd[1]: Starting Load Kernel Module fuse...
[ 1.710971] systemd[1]: Starting Load Kernel Module loop...
[ 1.711000] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 1.711774] systemd[1]: Starting Journal Service...
[ 1.712331] systemd[1]: Starting Load Kernel Modules...
[ 1.712353] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 1.712621] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.712657] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 1.712951] systemd[1]: Starting Coldplug All udev Devices...
[ 1.713428] systemd[1]: Mounted Huge Pages File System.
[ 1.713481] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.713516] systemd[1]: Mounted Kernel Debug File System.
[ 1.713554] systemd[1]: Mounted Kernel Trace File System.
[ 1.713591] systemd[1]: Mounted Temporary Directory /tmp.
[ 1.715874] loop: module loaded
[ 1.716005] usb 1-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[ 1.716008] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.716009] usb 1-4: Product: USB Receiver
[ 1.716011] usb 1-4: Manufacturer: Logitech
[ 1.717881] fuse: init (API version 7.39)
[ 1.720197] systemd-journald[387]: Collecting audit messages is disabled.
[ 1.763117] systemd[1]: Finished Create List of Static Device Nodes.
[ 1.763348] systemd[1]: Started Journal Service.
[ 1.766384] EXT4-fs (dm-0): re-mounted 3b792f53-5c82-4495-81bb-156b567e019e r/w. Quota mode: none.
[ 1.833554] nvidia: loading out-of-tree module taints kernel.
[ 1.833562] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.842959] usb 1-10: new high-speed USB device number 4 using xhci_hcd
[ 1.869937] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 1.870517] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 1.916034] NVRM: loading NVIDIA UNIX Open Kernel Module for x86_64 545.29.06 Release Build (archlinux-builder@)
[ 1.984910] usb 1-10: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.00
[ 1.984913] usb 1-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.984913] usb 1-10: Product: AS2107
[ 1.984914] usb 1-10: Manufacturer: ASMedia
[ 1.984915] usb 1-10: SerialNumber: 123456789088
[ 1.985778] hub 1-10:1.0: USB hub found
[ 1.985929] hub 1-10:1.0: 4 ports detected
[ 2.027163] nvidia-uvm: Loaded the UVM driver, major device number 234.
[ 2.044496] vboxdrv: Found 20 processor cores/threads
[ 2.066490] vboxdrv: TSC mode is Invariant, tentative frequency 3609598882 Hz
[ 2.066492] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
[ 2.069462] VBoxNetAdp: Successfully started.
[ 2.074716] VBoxNetFlt: Successfully started.
[ 2.076085] systemd-journald[387]: Received client request to flush runtime journal.
[ 2.094072] systemd-journald[387]: /var/log/journal/a3482dfc931d40dda0e6ebaad4b5b0f1/system.journal: Journal file uses a different sequence number ID, rotating.
[ 2.094081] systemd-journald[387]: Rotating system journal.
[ 2.109578] usb 1-12: new full-speed USB device number 5 using xhci_hcd
[ 2.251939] usb 1-12: New USB device found, idVendor=3434, idProduct=0109, bcdDevice= 2.04
[ 2.251951] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.251956] usb 1-12: Product: Keychron Q1
[ 2.251960] usb 1-12: Manufacturer: Keychron
[ 2.376263] usb 1-13: new high-speed USB device number 6 using xhci_hcd
[ 2.516694] usb 1-13: New USB device found, idVendor=31e9, idProduct=0002, bcdDevice= 1.10
[ 2.516701] usb 1-13: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.516703] usb 1-13: Product: SSL 2+
[ 2.516705] usb 1-13: Manufacturer: Solid State Logic
[ 2.535781] hid-generic 0003:0B05:19AF.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:00:14.0-2/input2
[ 2.536515] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.539836] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C52B.0002/input/input4
[ 2.541251] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.541309] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.542689] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 2.543329] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.543427] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 2.544122] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 2.545410] spi-nor spi0.0: s25fl064k (8192 Kbytes)
[ 2.547045] Creating 1 MTD partitions on "0000:00:1f.5":
[ 2.547047] 0x000000000000-0x000001800000 : "BIOS"
[ 2.547049] mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x800000
[ 2.547810] spi-nor spi0.1: mx25l12805d (16384 Kbytes)
[ 2.549553] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 2.550048] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.566262] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
[ 2.566539] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.596682] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[ 2.600059] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input5
[ 2.600295] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input6
[ 2.659647] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0003/input/input7
[ 2.659696] hid-generic 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[ 2.662173] hid-generic 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 2.662534] input: Keychron Keychron Q1 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:3434:0109.0005/input/input9
[ 2.663808] iTCO_vendor_support: vendor-support=0
[ 2.664312] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 2.664327] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 2.674180] i8042: PNP: No PS/2 controller found.
[ 2.675867] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[ 2.675873] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.675876] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.678207] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for x86_64 545.29.06 Release Build (archlinux-builder@)
[ 2.678558] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 2.678610] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.681678] cryptd: max_cpu_qlen set to 1000
[ 2.682975] r8169 0000:06:00.0: enabling device (0000 -> 0003)
[ 2.683216] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.684817] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.684821] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 2.690083] asus_wmi: ASUS WMI generic driver loaded
[ 2.691089] AVX2 version of gcm_enc/dec engaged.
[ 2.691121] AES CTR mode by8 optimization enabled
[ 2.692734] asus_wmi: Initialization: 0x0
[ 2.692782] asus_wmi: BIOS WMI version: 0.0
[ 2.692828] asus_wmi: SFUN value: 0x0
[ 2.692829] eeepc-wmi eeepc-wmi: Detected AsusMbSwInterface, not ASUSWMI, use DSTS
[ 2.694094] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[ 2.698076] r8169 0000:06:00.0 eth0: RTL8125B, 04:42:1a:97:b5:cd, XID 641, IRQ 205
[ 2.698078] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 2.699860] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 2.702119] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.702416] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 2.702452] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.702454] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.719667] hid-generic 0003:3434:0109.0005: input,hidraw4: USB HID v1.11 Keyboard [Keychron Keychron Q1] on usb-0000:00:14.0-12/input0
[ 2.719978] hid-generic 0003:3434:0109.0006: hiddev99,hidraw5: USB HID v1.11 Device [Keychron Keychron Q1] on usb-0000:00:14.0-12/input1
[ 2.720525] input: Keychron Keychron Q1 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input11
[ 2.720567] input: Keychron Keychron Q1 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input12
[ 2.722366] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.722369] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.722370] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.722371] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.722371] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 2.722372] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.722372] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.722373] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.722374] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.742192] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 2.742267] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 2.765506] intel_tcc_cooling: Programmable TCC Offset detected
[ 2.775200] intel_rapl_msr: PL4 support detected.
[ 2.775215] intel_rapl_common: Found RAPL domain package
[ 2.775217] intel_rapl_common: Found RAPL domain core
[ 2.776313] input: Keychron Keychron Q1 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input13
[ 2.776365] input: Keychron Keychron Q1 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:3434:0109.0007/input/input14
[ 2.776382] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 2.776402] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 2.776422] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 2.776568] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 2.776589] hid-generic 0003:3434:0109.0007: input,hidraw6: USB HID v1.11 Mouse [Keychron Keychron Q1] on usb-0000:00:14.0-12/input2
[ 2.776602] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 2.776627] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 2.776638] usbcore: registered new interface driver usbhid
[ 2.776640] usbhid: USB HID core driver
[ 2.776870] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 2.858177] EXT4-fs (dm-1): mounted filesystem 7c1dd610-f0d1-43b4-a0b4-3ba1d81f0db6 r/w with ordered data mode. Quota mode: none.
[ 2.862014] mousedev: PS/2 mouse device common for all mice
[ 3.008433] mc: Linux media interface: v0.10
[ 3.214187] usb 1-13: Quirk or no altest; falling back to MIDI 1.0
[ 3.214764] usbcore: registered new interface driver snd-usb-audio
[ 3.439720] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
[ 3.461667] logitech-djreceiver 0003:046D:C52B.0004: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 3.577509] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input24
[ 3.579964] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input25
[ 3.580580] hid-generic 0003:046D:406F.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:14.0-4/input2:2
[ 3.613185] r8169 0000:06:00.0 enp6s0: Link is Down
[ 3.977302] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0004/0003:046D:406F.0008/input/input29
[ 3.978346] logitech-hidpp-device 0003:046D:406F.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-4/input2:2
[ 4.335666] ACPI Warning: \_SB.PC00.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230628/nsarguments-61)
[ 6.586690] Xorg[822]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 7.390057] simple-framebuffer simple-framebuffer.0: swiotlb buffer is full (sz: 1822720 bytes), total 32768 (slots), used 76 (slots)
[ 7.852030] rfkill: input handler disabled
[ 13.033181] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: Downshift occurred from negotiated speed 1Gbps to actual speed 100Mbps, check cabling!
[ 13.033210] r8169 0000:06:00.0 enp6s0: Link is Up - 100Mbps/Full (downshifted) - flow control rx/tx
[ 13.816753] systemd-journald[387]: /var/log/journal/a3482dfc931d40dda0e6ebaad4b5b0f1/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ 14.432349] rfkill: input handler enabled
[ 15.699976] simple-framebuffer simple-framebuffer.0: swiotlb buffer is full (sz: 1351680 bytes), total 32768 (slots), used 84 (slots)
[ 16.161368] rfkill: input handler disabled
[ 17.205543] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 17.247267] ISOFS: changing to secondary root
[ 35.856797] logitech-hidpp-device 0003:046D:406F.0008: HID++ 4.5 device connected.