[ATI]catalyst fonctionne pas du TOUT(a trouvé la raison)

mum1989 · Message par **mum1989** » dim. 11 oct. 2009, 09:39

Bonjour, je viens tout juste de monter ma config (AMD Phenom II X2 550be (débloqué en X4), + ATI 4870 512mo etc...), je suis sous Archlinux i686 (tout à jour) donc kernel 2.6.31.
Malheuresement j'ai une ATI, je pensais que ça fonctionnait les pilotes proprio

.

Donc, j'installe ces pilotes en suivant à la lettre le Wiki fr d'archlinux.
après l'installation
J'essaye

Code : Tout sélectionner

modprobe fglrx

et la ça ne fonctionne pas.
ou pareil si je redémarre.
Ensuite j'essaye quand même de lancer xorg (afin kde4), et evidemment ça ne fonctionne pas j'ai bien renseigné le xorg.conf.

Ensuite je n'ai pas fait ça :

Code : Tout sélectionner

cp /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy

Après hal est bien installé et démarré.

Enfin, je ne souhaite pas utiliser le driver libre radeonhd, je ne souhaite pas avoir 0.0001FPS dans les jeux

, je souhaiterais profiter au max de ma carte graphique.
J'avais essayé le driver radeonhd il fonctionnait, j'était en 1204*768 peut être fallait modifier le xorg.conf pour être en 1280*1024 bref.
Ensuite on m'a parlé du driver xf86-video-radeonhd-git, la c'est simple il ne se compile pas (dépendence OK).

Nydol · Message par **Nydol** » dim. 11 oct. 2009, 13:21

Il semblerait que le driver Catalyst n'apprécie pas le dernier noyau (2.6.31) :
Suite à une mise à jour j'ai le même problème, je cherche une solution

(sans réinstaller l'ancien noyau, si possible ...)

edit : J'ai trouvé ça sur http://wiki.archlinux.org/index.php/ATI ... _.28KMS.29:

wiki.archlinux.org a écrit : Kernel Mode Setting Troubleshooting
Problems' solutions
Disable KMS

If your card is not yet well supported this can happen: kernel crash, Xorg refuses to start, Xorg unloads the DRI2 module and falls back to mesa software rasterizer meaning no 3D acceleration.

The solution is to disable experimental KMS and fall back to the old behavior. Add "radeon.modeset=0" into the kernel append line in /boot/grub/menu.lst or the lilo configuration file. If "radeon.modeset=0" won't work, try adding "nomodeset" instead.

If you have added "radeon" in MODULES array in mkinitcpio.conf, remove it and rebuild the initramfs with

mkinitcpio -p kernel26

Warning: Catalyst users: You will probably also need to blacklist module loading for radeon. Put "!radeon" into your modules array in /etc/rc.conf.

Options for modules can be provided in a file under /etc/modprobe.d. If you are using the radeon module ("lsmod | grep radeon"), you can switch off kms by creating a file specifying the module options e.g. /etc/modprobe.d/radeon.conf (chown root:root, chmod 644):

options radeon modeset=0

Delete xorg.conf

Deleting xorg.conf, which may include options that may cause problems regarding driver's behaviour, try making a backup of your xorg.conf, and then delete it.

mum1989 · Message par **mum1989** » dim. 11 oct. 2009, 15:55

Code : Tout sélectionner

Il semblerait que le driver Catalyst n'apprécie pas le dernier noyau (2.6.31) :
Suite à une mise à jour j'ai le même problème, je cherche une solution  (sans réinstaller l'ancien noyau, si possible ...)

sauf que moi je viens juste de monter la config

ok merci pour l'info, donc peut être il sufirait de désactiver le KMS
je vais tester
je vous tiens au courant.

mum1989 · Message par **mum1989** » dim. 11 oct. 2009, 17:29

bon j'ai essayé ça ne fonctionne pas chez moi

j'ai même essayé des drivers soit disant fait pour le 2.6.31 mais sans succès :
ici :
http://odplata.ic.cz/catalyst-utils.tar.gz

et ici :
http://odplata.ic.cz/catalyst.tar.gz

quelques infos sur le forum EN :
http://bbs.archlinux.org/viewtopic.php?pid=616803

Nydol · Message par **Nydol** » dim. 11 oct. 2009, 18:52

ça fonctionne pas chez moi non plus, j'ai réinstaller les drivers opensource en attendant ...

mum1989 · Message par **mum1989** » dim. 11 oct. 2009, 19:50

ok, si on rétrogradait on kernel 2.6.30 ça pourrait fonctionner ?

et si oui comment on fait déja ?
(j'ai vidé le cache)

Nydol · Message par **Nydol** » dim. 11 oct. 2009, 21:44

http://arm.nrk.cc/search/

normalement oui ...

mum1989 · Message par **mum1989** » dim. 11 oct. 2009, 22:57

merci pour l'astuce !

Swandyr · Message par **Swandyr** » mar. 13 oct. 2009, 22:16

Une solution trouvée ici : http://aur.archlinux.org/packages.php?ID=29111

En gros, faut réinstallé les catalyst en modifiant le PKGBUILD et en décommentant la ligne 21 :

Code : Tout sélectionner

0 # Uncomment the following line if you are using kernel 2.6.31
21 patch -p0 < 2.6.31.patch

Perso, ça a pas suffit et en chargeant fglrx j'avais ça

Code : Tout sélectionner

FATAL: Error inserting fglrx (/lib/modules/2.6.31-ARCH/video/fglrx.ko): Operation not permitted

mais problème réglé en rajoutant dans le rc.con à la ligne MODULES =() : fglrx !drm !radeon

Ca a suffit pour moi (avec une HD4650), j'ai pas poussé l'investigation plus loin, mais y'a plusieurs pistes dans la discussion.

Nydol · Message par **Nydol** » mar. 13 oct. 2009, 23:48

Merci, ça marche

mum1989 · Message par **mum1989** » ven. 16 oct. 2009, 22:42

mais problème réglé en rajoutant dans le rc.con à la ligne MODULES =() : fglrx !drm !radeon

be moi ça fonctionne toujours pas

j'ai essayé les driver catalyst-beta ça ne fonctionne pas non plus

j'en ai marre de sanner pendant des jours pour aucun résultats
j'attends les nouveaux pilotes 9.10

Nydol · Message par **Nydol** » ven. 16 oct. 2009, 22:46

Tu as réinstallé les drivers en décommentant la ligne indiqué dans le PKGBUILD ?

mum1989 · Message par **mum1989** » ven. 16 oct. 2009, 23:18

Tu as réinstallé les drivers en décommentant la ligne indiqué dans le PKGBUILD ?

j'avais installé une version soit disant faite pour le 2.6.31

mais la j'ai trop la flemme de le réinstaller j'en ai pour encore 2*10minutes pour le re télécharger.

mum1989 · Message par **mum1989** » sam. 17 oct. 2009, 17:28

Swandyr ou Nydol pourriez vous me donner votre xorg.conf pour voir ?

mum1989 · Message par **mum1989** » sam. 17 oct. 2009, 18:19

UP !

voici mon xorg.conf :

Code : Tout sélectionner

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
	Load  "dri"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	Option	    "XANNoOffscreenPixmaps" "true"
	Option	    "DRI" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

ainsi que mon Xorg0.log :

Code : Tout sélectionner

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686 
Current Operating System: Linux GrosPC 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 13:36:23 CEST 2009 i686
Build Date: 10 October 2009  06:17:30PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 16 20:01:09 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xa40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:9440:174b:e850 ATI Technologies Inc RV770 [Radeon HD 4870] rev 0, Mem @ 0xd0000000/268435456, 0xfdfe0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[26] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[27] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[28] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[29] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[30] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[31] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[32] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[33] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[34] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[35] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.65.4
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.65.4
	Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.65.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.65                                 
(II) ATI Proprietary Linux Driver Build Date: Aug 13 2009 21:15:30
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9440) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[26] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[27] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[28] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[29] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[30] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[31] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[32] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[33] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[34] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[35] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x8fdf0d0
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[25] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[26] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[29] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[30] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[31] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[32] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[33] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[34] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[35] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[36] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[37] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[38] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "dri" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
(--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9440)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe850)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdfe0000
(--) fglrx(0): I/O port at 0x0000ee00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.10
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: RV770
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Hasn't establisted DRM connection
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000001, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0):  Display1: No EDID information from DDC.
(EE) fglrx(0): Unknown EDID version 0
(II) fglrx(0):  Display1: Failed to get EDID information. 
(II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output CRT1 using initial mode 1600x1200
(==) fglrx(0): DPI set to (96, 96)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.3.901, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(**) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[25] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[26] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[29] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[30] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[31] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[32] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[33] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[34] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[35] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[36] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[37] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[38] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1600 x 6591
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 78
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.4.99.906, module version = 1.0.0
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "XANNoOffscreenPixmaps" is not used
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI capable
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(II) fglrx(0): Setting screen physical size to 423 x 317
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device A4Tech PS/2+USB Mouse
(**) A4Tech PS/2+USB Mouse: always reports core events
(**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event6"
(II) A4Tech PS/2+USB Mouse: Found 12 mouse buttons
(II) A4Tech PS/2+USB Mouse: Found x and y relative axes
(II) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
(II) A4Tech PS/2+USB Mouse: Configuring as mouse
(**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
(**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
(**) A4Tech PS/2+USB Mouse: (accel) filter chain progression: 2.00
(**) A4Tech PS/2+USB Mouse: (accel) filter stage 0: 20.00 ms
(**) A4Tech PS/2+USB Mouse: (accel) set acceleration profile 0
(II) A4Tech PS/2+USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 0000000c, ulEventData = 00000001
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 00000002, ulEventData = 00000000
(EE) fglrx(0): Failed to disable interrupts. Errorcode -9
(EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) A4Tech PS/2+USB Mouse: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"

Nydol · Message par **Nydol** » sam. 17 oct. 2009, 19:02

Mon xorg.conf (généré par aticonfig et légèrement modifié) :

Code : Tout sélectionner

Section "ServerLayout"
        Identifier     "aticonfig Layout"
        Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
    Load  "i2c"     # pour gérer la télévision
    Load  "ddc"     # ddc probing of monitor
    Load  "dbe"
    Load  "dri"     # module pour l'accélération matériel
    Load  "extmod"
    Load  "glx"     # pour la 3D
    Load  "bitmap"  # bitmap-fonts
    Load  "type1"
    Load  "freetype"
    Load  "int10"   # ajout
    Load  "vbe"     # ajout
    Load  "record"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]-0"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]-0"
        Driver      "fglrx"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]-0"
        Device     "aticonfig-Device[0]-0"
        Monitor    "aticonfig-Monitor[0]-0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
     Mode 0666
EndSection

La partie module je l'ai faite rapidement (copier/coller ...)

mum1989 · Message par **mum1989** » sam. 17 oct. 2009, 19:27

merci beaucoup je vais essayer avec celui ci

mum1989 · Message par **mum1989** » sam. 17 oct. 2009, 19:42

bon ça ne fonctionne pas non plus avec le xorg.conf de Nydol

à noter j'ai un viel écran CRT 17" (en VGA)
avec une ATI 4870 (2sorties DVI).

Nydol quel est ton écran ? comment est-il branché dvi ? vga ? et quel est ta carte graphique ?
merci.

en fait quand je lance la commande startx, l'écran se met "en veille"

EDIT : à noter sous windows 7 x64 l'écran est affiché comme non plug and play
il faudrait que je rajoute la résolution de l'écran peut être ?

Nydol · Message par **Nydol** » sam. 17 oct. 2009, 20:58

radeon HD 4850 et un ecran samsung 19" branché en DVI

mum1989 · Message par **mum1989** » sam. 17 oct. 2009, 21:18

ok merci pour l'info

je suis presque sur que ça vient de la
j'ai une CG ATi 4870 (dvi) branchée en sur l'écran CRT tout pourri en VGA.

tu aurais pas un viel ecran crt histoire de tester? sur ton pc ? pour voir si ça vient de la ?

j'ai trouvé un topic intéressant sur ça pour le driver radeonhd mais je galère toujours :
http://bbs.archlinux.org/viewtopic.php?id=63874&p=1

EDIT : le pilote radeonhd c'est de la grosse merde dans les jeux 0.5fps à Teeworld un jeux 2d

Arch Linux

Archlinux.fr [Forums]

[ATI]catalyst fonctionne pas du TOUT(a trouvé la raison)

[ATI]catalyst fonctionne pas du TOUT(a trouvé la raison)

Re: [ATI] les catalyst 9.9 fonctionnent sous 2.6.31 ?

Re: [ATI] les catalyst 9.9 fonctionnent sous 2.6.31 ?

Re: [ATI] les catalyst 9.9 fonctionnent sous 2.6.31 ?

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]les catalyst 9.9 fonctionnent sous 2.6.31?(apparement n

Re: [ATI]catalyst 9.9 fonction. pas chez moi sous 2.6.31(stagne)

Re: [ATI]catalyst 9.9 fonction. pas chez moi sous 2.6.31(stagne)

Re: [ATI]catalyst 9.9 fonction. pas chez moi sous 2.6.31(stagne)

Re: [ATI]catalyst 9.9 fonction. pas chez moi sous 2.6.31(stagne)

Re: [ATI]catalyst 9.9 fonction. pas chez moi sous 2.6.31(stagne)